F L A S H W A V E PACKET OPTICAL NETWORKING Platform
AGILITY FOR CHANGING NETWORKS In a changing communications world, service providers are enhancing the capacity and efficiency of their access networks. They must meet demand for new packet-based services and maintain guaranteed service delivery. As Ethernet becomes more prevalent, the networks must evolve to deliver it efficiently and cost-effectively. Fujitsu has developed the next generation of packet optical networking platforms specifically to meet these emerging challenges and smooth the transition to connection-oriented Ethernet services. A Whole New Class of Optical Edge System The CDS (Compact Density System) enables service providers to deliver business Ethernet and legacy services over their existing network infrastructure. In the competitive telecommunications industry, service providers cannot afford the cost of deploying and operating networks specifically for different services. By consolidating support for multiple service types onto a single network infrastructure, the CDS reduces costs for both network equipment and ongoing operation. Compact and modular, the CDS supports a wide array of Ethernet and SONET/SDH interfaces. It incorporates advanced rate shaping and traffic management and aggregation, to provide guaranteed connection-oriented Ethernet delivery, while supporting existing revenue-bearing services. The CDS delivers both: Agile packet edge services, traditionally found only in high-end, feature-rich access service elements Efficient multiservice support for packet-based Ethernet as well as traditional SONET/SDH Carrier-Grade Quality For more than 20 years, Fujitsu has built dependable, scalable optical networks for customers of all types and sizes. Fujitsu has set the standard for performance, reliability and carrier-grade quality. The CDS is designed to be deployed by local and national carriers, cable companies, wireless service providers, public utilites and government agencies. CABLE PROVIDERS GOVERNMENT LOCAL CARRIERS NATIONAL CARRIERS MULTIPLE SYSTEM OPERATOR UTILITY COMPANIES WIRELESS SERVICE PROVIDERS 2
EFFICIENT, MODULAR, HIGH-VALUE The CDS consists of a common two-slot chassis and a range of interface units to meet a variety of business applications, traffic capacity requirements and price points. Service providers can leverage its modular architecture to enhance their business services and optimize their access network. This innovative platform smoothes the transition to a packet-centric network architecture by enabling next-generation Ethernet services while preserving the integrity of legacy services. Key Technical Advantages Two-slot modular design High-density Ethernet interfaces Connection-oriented Ethernet transport Advanced traffic prioritization and traffic management Robust Ethernet link and service OAM Protected Ethernet delivery with link aggregation Diverse interface options for Ethernet and SONET/SDH services Mix-and-match packet and legacy services Key Network Benefits Consolidates multiple access boxes into a single edge platform Delivers high-bandwidth Ethernet services Delivers guaranteed QoS and SLAs Reduces equipment space requirements Leverages and extends existing optical network Transitions to Ethernet and packet-based services Maintains support for existing services Lowers operational costs PRESERVE LEGACY NETWORKS PACKET EDGE SERVICES REDUCE CAPEX/OPEX SPACE SAVINGS CONSOLIDATE MULTIPLE BOXES MODULAR DESIGN FOR FLEXIBLE SERVICES THE WINNING COMBINATION KEY NETWORK BENEFITS SONET/TDM SUPPORT HIGH BANDWIDTH GUARANTEED QoS/SLA MAINTAIN EXISTING REVENUE SERVICES EXPAND CURRENT SERVICES 3
THE PACKET EDGE ARCHITECTURE The CDS provides modular, efficient service delivery and aggregation for business access services. The platform can be used to provide high-capacity services from a Central Office (CO), directly at customer premises (CPE), in outside-plant cabinets for business park and cell site applications or on multiple floors of multitenant office buildings. From a serving CO or CPE location, 1 Gigabit Ethernet, 10 Gigabit Ethernet, or OC-48 network interfaces allow connections into larger metropolitan networks. The CDS is ideally suited for deployments with both the 7500 ROADM and the 9500 Packet Optical Networking Platform (Packet ONP). Metro Network The Next-Generation Edge Network 9 5 0 0 9 5 0 0 7 5 0 0 7 5 0 0 9 5 0 0 9 5 0 0 7 5 0 0 7 5 0 0 GE, 10 GE or G.709 GE, 10 GE or G.709 Link Aggregation GE, 10 GE or G.709 dual-homed GE or 10 GE Ring OC-48 Ethernet & TDM FE or GE Link Aggregation Link Aggregation Fast Ethernet Gigabit Ethernet TDM Gigabit Ethernet OC-3 OC-12 Fast Ethernet Gigabit Ethernet TDM Modular Scalability, Wide Array of Interface Options Access networks are characterized by the need to support a wide array of services over a variety of access technologies. Traditionally, service providers resorted to multiple overlay networks to meet all of the varying service requirements, resulting in costly, inefficient edge networks. With a competitive industry environment and increasing bandwidth requirements, the traditional approach simply isn t sustainable from a business or operational perspective. The CDS effectively supports the wide range of services and applications found in access networks. Its unique hardware and software architecture integrates Ethernet and SONET/SDH technology in a compact, cost-effective platform. 4
CRITICAL NETWORK APPLICATIONS Enterprise Ethernet Services The CDS is the ideal access and aggregation solution for delivering Ethernet business services. High-density Ethernet service interface cards allow large numbers of data customers to be supported in a single system. Integrated traffic management, data aggregation, and connection-oriented Ethernet transport technologies provide robust, carrier-grade data services with guaranteed Service Level Agreements (SLA). Legacy Services Demarcation Legacy SONET/EoS services remain the primary revenue producers for most service providers. Today, these services are usually terminated at customer sites by deploying a full SONET platform. With the CDS, a single service module provides both service delivery and service demarcation. The platform s small size, low power consumption and cost-to-value ratio all offer compelling benefits when compared to terminating these services on a traditional ADM. Wireless Backhaul The CDS eases migration from TDM to Ethernet transport for next-generation WiMAX and 4G LTE base stations. These systems require high-bandwidth, native Ethernet transport services the perfect application for the CDS optical edge platform. DELIVER TO SMALL AND LARGE ENTERPRISES OUTDOOR CABINET CUSTOMER PREMISES MULTITENANT UNIT EFFICENTLY DEMARC CURRENT SERVICES Low Power Consumption and a Small Footprint TRANSITION FOR WIRELESS BACKHAUL Next-Generation Transition The CDS provides an advanced Ethernet service and aggregation architecture for access networks. The incorporation of SONET/SDH, and Ethernet enables a smooth, seamless transition to a packet-centric architecture. AGGREGATION FOR ACCESS NETWORKS 5
NETWORK LIFE CYCLE SERVICES Fujitsu offers a broad selection of professional services for every stage in a network s evolution and operation. From planning through deployment and ongoing maintenance to future enhancements, Fujitsu Network Life Cycle Services are available whenever needed. Fujitsu sales representatives can guide service providers in selecting options that address individual business needs. Popular planning and deployment services for the CDS include: Custom Cabinet Solutions Turnkey inside wall-mount and outside-plant solutions, including standard and custom configurations for wireline, wireless, FTTx, cable and MSO customers Furnish Material Identification and ordering of the material needed to install network equipment such as electrical and fiber cable solutions, minor materials and third-party ancillary equipment Turn-Up and Test From on-site configuration and simple turn-up to rigorous, long-term testing Service Support Packages for Ongoing Maintenance For a complete professional maintenance solution, Fujitsu service support packages have the right combination of flexibility and comprehensive assurance. Choose the level and types of service you need to supplement your own resources. Our service support packages help keep your network running smoothly, provide critical care and protect the longevity of your investment. Network Operations Center (NOC) With a full range of vendor-independent network fault and performance monitoring features, the Fujitsu NOC offers guaranteed, round-the-clock system protection. Our reliable NOC facility is available as a primary or supplemental operations resource. This service not only helps you control costs and maintain high levels of customer satisfaction, it also provides trustworthy and reliable after-hours and emergency coverage. 6
FEATURES AND SPECIFICATIONS System Overview 2-slot, 2RU, modular chassis Universal slots support any interface units Available Interfaces LDP1 Standard GE Data Unit LDP3 SONET Unit HDP1 Standard 10GE Data Unit Ethernet Functions 12 x Gigabit Ethernet (SFP) or mixed with 12 x 10/100/1000Base-T (RJ45) 2 x OC-48 WAN 2 x Gigabit Ethernet/OC-3/OC-12 2 x 10 Gigabit Ethernet (XFP) 12 x Gigabit Ethernet (SFP) 12 x 10/100/100Base-T (RJ45) EPL and EVPL Services VLAN push, pop, translation Connection admission control 802.3ad Ethernet link aggregation 1+1 0:N Jumbo frame support Advanced traffic classification Port VLAN Ethernet priority bit (802.1p) IP DSCP Strict priority & per-evc queuing Hierarchical shaping with logical ports 802.3ah link EFM OAM In-band VLAN management SONET/SDH Functions STS/STM cross connects TDM multiplexing Ethernet over SONET GFP-F encapsulation HO VCAT SDCC support for remote access Operating Environment Operations temperature range 40 to +65 C ( 40 to +149 F) Humidity range 5 to 95% Maximum Power Consumption (Heat Dissipation) Maximum power per system Power Input Physical Characteristics Dimensions (H x W x D) Weight Operations 212 W (723 BTU/hr) 48 VDC 110 VAC (via 1RU rectifier) 3 x 17.4 x 8.9" (76 x 442 x 226 mm) 2RU high, 19/23" rack-mountable 10.2 lb/22 kg TL1 protocol over OSI/Ethernet NETSMART 500 Element Management System (EMS) NETSMART 1500 Network Management System (NMS) Software download and remote memory backup/restore Interoperable with 7500 ROADM and 9500 Packet ONP platforms Telcordia OSMINE compliant Environmental Compliance UL-certified NEBS Level 3 compliant CDS 7
Fujitsu Network Communications Inc. 2801 Telecom Parkway, Richardson, TX 75082 Tel: 800.777.FAST (3278) Fax: 972.479.6900 us.fujitsu.com/telecom Copyright 2009 Fujitsu Network Communications Inc. and NETSMART are trademarks of Fujitsu Network Communications Inc. (USA). FUJITSU (and design) and THE POSSIBILITIES ARE INFINITE are trademarks of Fujitsu Limited. All Rights Reserved. All other trademarks are the property of their respective owners. Configuration requirements for certain uses are described in the product documentation. Features and specifications subject to change without notice. 7.0/R3.3/09.09