RIM MOUNTED AND DUAL ACCESS LOCKS

Introduction Introduction UNION offers a range of rim-mounted and dual access locks, which are ideal for commercial and residential use. The range includes rim locks and nightlatches as well as a choice of two dual access devices to suit the particular application. Note We have made every effort to ensure that at the time of going to print all information in this catalogue is correct. However, in our efforts to continually improve our products and offer only the highest levels of security and quality we reserve the right to make alterations to the product specifications shown in this catalogue. All dimensions provided within this catalogue are approximate and for guidance only. Guarantee UNION products are guaranteed for 1 year from the date of purchase against mechanical faults arising from defects in materials or design. In the unlikely event of your UNION product failing as a result of defective materials or design a free replacement product will be provided. It is a condition of this guarantee that your UNION product: Has been correctly installed and maintained in accordance with the instructions provided to you at the time of purchase Has not been modified in any way This guarantee does not apply to mechanical faults caused wilfully or negligently, or to the surface finish of your product. Proof of purchase must be submitted when making a claim under this guarantee and all claims must be submitted within 2 months of you discovering the mechanical fault of your UNION product. Grading of Locks Commercial Grade Locks Commercial Grade locks are the premier range and are recommended for use in all applications e.g. Residential, Private Sector, Commercial Office, Retail and Entertainment Complexes and the whole spectrum of Public Sector Developments. These locks are of superior engineering design, robust construction, use thicker gauge metals and are subject to stringent testing. Their performance is guaranteed subject to correct application. Standard Grade Locks Standard Grade locks are designed to meet the demand for lower cost locks by Private and Public Sector developers who need to meet strict budgetary constraints. The locks are value engineered to meet functional requirements at reduced costs. The performance of this range will be inferior to that of Commercial Grade locks and ASSA ABLOY do not guarantee their performance in high traffic situations and in conditions where they could be subject to abuse. Caution should be exercised when using these locks in combination with heavy unsprung or poorly sprung lever handles.

Keying Options To Differ (i.e. Standard) To Differ (i.e. Standard) indicates locks can be supplied with a standard range of different keys. This range varies from 18 in the case of certain 2 lever locks to 500 in the case of certain 5 lever locks. The range of different keys available with Pin tumbler cylinders is approximately 5000. Keyed Alike Keyed Alike indicates that designated locks can be manufactured to be operated by a single standard key. Locks are described as being Keyed Alike to Standard Differs. Alternatively designated locks under a Master Key or Grand Master Key system can also be keyed alike. These are described as being Keyed Alike under Master Key or Keyed Alike under Grand Master Key. Master Keyed Master Keyed indicates that designated locks can be operated by two different keys, one, the Servant Key operates individual locks, whilst the Master Key operates all locks. (This group of locks are referred to as a Suite, hence the term en-suite locks). There are limitations to the number of locks that can be master keyed in a single suite. We recommend that you consult your ASSA ABLOY technical sales consultant in this regard. For a schematic representation of a Master Keyed system refer to figure 1. Grand Master Keyed Grand Master Keyed indicates that designated locks can be operated by three or more different keys, one, the Servant Key operates individual locks whilst the Grand Master Key operates all locks. (The locks can be grouped into two or more different Sub Suites where a Sub Master Key opens those in a particular Sub Suite). The term en-suite is also applied to locks in this configuration. There are limitations to the number of locks that can be master keyed in a single suite and to the number of Sub Suites in such a system. We recommend that you consult your ASSA ABLOY technical sales consultant in this regard. For a schematic representation of a Grand Master Keyed system refer to figure 2. Specifiers need to clearly document the intended Keying Option. Schematic representations as illustrated in Figures 1 and 2 are recommended. Alternatively this can be done in tabular form, an example of this method is illustrated in figure 3. (Attached please find a laminated blank table, for your use). Grand Master Key Master Key Sub Master Key A Sub Master Key B Lock 1 Lock 2 Lock 3 Lock 1 Lock 2 Lock 3 Lock 4 Lock 5 Lock 6 Master Keyed - Figure 1 Grand Master Keyed - Figure 2 Only locks having identical mechanisms can be keyed into a common Keying System, i.e. Master Keyed, Grand Master Keyed or Keyed Alike. To assist the specifier in identifying locks with identical Keying Systems, we have introduced different coloured symbols in the Cylinder Selection Chart as well as in the Specification Tables, on the following pages. Locks with identical mechanisms will have identical coloured symbols 1

Keying Plan ATTENTION! It is essential to indicate beforehand any possible future extensions to the keying plan Locks or cylinders PREMISES REF. Qty. ART. N. Lock 1 1 2x18SCGMK Lock 2 1 2x18SCGMK Lock 3 1 1x1PLGMK Lock 4 1 2x18SCGMK Lock 5 1 2x18SCGMK Lock 6 1 1x1PLGMK The World s Leading Lock Group KEYING PLAN PROJECT ARCHITECT DRAWN UP BY KEY - Ref. Qty. USED BY No. Grand Master 2 General Manager Sub Master A 2 Operations Manager Sub Master B 2 Admin Manager Lock 1 2 Storeman Lock 2 2 Assembly Foreman Lock 3 2 Production Foreman Lock 4 2 Receptionist Lock 5 2 Debtors Clerk Lock 6 2 Creditors Clerk KEYS Figure 3 Common Keying System Symbols Pin Tumbler Cylinder Pin Tumbler Cylinder (different from above) 2

Cylinder Selection Chart Circular Cylinders Keyed to Differ Keyed Alike Master Keyed Grand Master Keyed 1x1 Material and Finishes: Brass - CH (Chrome) PL (Brass Polished) SC (Satin Chrome) 1x1CH 1x1CHKA 1x1CHMK 1x1CHGMK 1x1PL 1x1PLKA 1x1PLMK 1x1PLGMK 1x1SC 1x1SCKA 1x1SCMK 1x1SCGMK 1x300 Material and Finishes: Brass - PL (Brass Machined) NP (Nickel Plated) Not Applicable 1x300PLKA 1x300PLMK 1x300PLGMK 1x300NPKA 1x300NPMK 1x300NPGMK 3

AL6CAMP-AS Campus Lockset AL6CAMP-AS Campus Lockset complete and including: AL6SA67-05ASCAM Campus Sable Furniture (pair) L-22316-76/25SS Euro Profile Cylinder Lock case with Drawback Latch 2x815 Euro Profile knob Cylinder UN334000000000 40mm Brass Padlock (optional - recommended padlock for purchase by room occupant) Grading Standard Quality Application Suitable for single action doors, hinged left and right Suitable for doors from 40mm to 50mm thick Designed for use as bedroom door lock in hostel/ residence facilities Most suited to these facilities in the higher and tertiary education sectors Most suited to single bedrooms Incorporates dual-locking (ie occupant of bedroom and residence administration have separate means of locking and unlocking the room) This affords the residence administration simpler key management as the room occupants take responsibility for the management of their own keys Operation Lockset is locked and unlocked by occupant by means of a standard 40mm padlock With the padlock removed, the lever handle can be depressed to unlatch the door Lockset can be locked and unlocked from the inside by occupant using the knob turn of euro profile knob cylinder The Administration s Control Key can be a Master Key, Grand Master Key or Pass key (in the case of a Keyed Alike system) Locking the deadbolt from outside using Control Key can be used to lock out occupant and secure room in locked position even with padlock removed 4

AL6CAMP-AS EXTERNAL VIEW - LEFT HAND LOCKSET INTERNAL VIEW EXTERNAL VIEW (PADLOCK NOT SHOWN) Specifications Product References Lock Forend and Striking Plate Finish AL6CAMP-AS SS Stainless Steel Latch Bolt Brass (handing reversible) Dead Bolt Brass Cylinder Type and Finish 2x815NP (Nickel Plated) Cylinder Keying Options Available Keyed Alike, Master Keyed and Grand Master Keyed PWD Reference Number Not Applicable 5

1487 Reslok 1487 Reslok Complete (excluding padlock) UN3340407000 40mm Brass Padlock (For purchase by Residence Administration and issuing to room occupant) Grading Commercial Quality Application Suitable for single action doors, hinged left and right Suitable for doors from 40mm to 50mm thick Designed for use as bedroom door lock in hostel/residence facilities Most suited to these facilities in the higher and tertiary education sectors Most suited to single bedrooms Incorporates dual-locking (ie occupant of bedroom and residence administration have separate means of locking and unlocking the room) This affords the residence administration simpler key management as the various room occupants take on the responsibility for the management of their own keys 6

1487 Operation Reslok knob is locked and unlocked by the occupant by means of a special padlock with removable shackle With padlock removed, knob can be rotated thereby unlocking the door Administration unlock using their Control Key in the circular Reslok cylinder Reslok can be locked by administration by turning Control Key 360. This can be used to lock out occupant and secure room in locked position even with padlock removed The Administration s Control Key can be a Master Key, Grand Master Key or Pass key (in the case of a Keyed Alike system) ILLUSTRATES NIGHTLATCH FIXED TO RIGHT HAND DOOR Specifications Product References 1487 Reslok Body Material and Finish Nightlatch Material and Finish Pressed Steel (Brown Powder Coated) Pressure Die Cast Zinc Alloy - Gold Powder Coated Latch Hard Gold Anodised Aluminium Alloy with Anti-Credit Card Feature Cylinder Type and Finish 1x1SD (Brass Sanded) Cylinder Keying Options Available Keyed Alike, Master Keyed and Grand Master Keyed PWD Reference Number Not Applicable 7

1022 Cylinder Rim Night Latch 1022 Anti Credit Card Night Latch with 1x1 Cylinder L-1022 Anti Credit Card Night Latch without Cylinder 1x1 Circular Cylinder (specify with L-1022 as required) 1x300 Circular Cylinder (specify with L-1022 as required) Grading Standard Quality Application Suitable for single action doors, hinged left and right Suitable for doors from 32mm to 50mm thick Standards SABS approved Specifications Product References Case and Staple Material Finish 1022G (including 1x1SD cylinder), L-1022G (without cylinder) Pressure Die Cast Zinc Alloy 1022G (Gold Powder Coated) Latch Hard Gold Anodised Aluminium Alloy with Anti-Credit Card Feature 1x1 - SC (Satin Chrome), CH (Chrome), PL (Polished Brass) and Cylinder Type and Finish SD (Brass Sanded - supplied as standard with 1022G) 1x300 - NP (Nickel Plated), PL (Machined Brass) Cylinder Keying Options Key Differs Available Keyed to Differ (ie Standard), Keyed Alike, Master Keyed or Grand Master Keyed ±5000 Standard Differs PDW Reference Number Not Applicable 8

1448 Rim Lock 1448 Rim Lock only 1448-5248 Rim Lock with Plastic Knob Furniture 5248 Plastic Knob Furniture only 5249 Pressed Brass Knob Furniture only (specify with 1448 as required) Grading Standard Quality 5249PL 5248PX Application Suitable for single action doors, hinged left and right, opening inwards only Suitable for doors from 32mm to 50mm thick 1448BJ Specifications Product References Case and Staple Material Rim Lock Finish 1448BJ - Rimlock only 1448-5248PX - Rimlock with Standard Plastic Knob Furniture Pressed Steel 1448BJ (Black Powder Coated) Latch Brass Dead Bolt Aluminium - Gold Anodised Keying Options Differs Knob Furniture Material and Finish PWD Reference Number Available Keyed to Differ (ie Standard) 12 Standard Differs R4F to R15F 5248PX - Brown Plastic - supplied as standard with 1448-5248PX 5249PL - Pressed Brass Polished Not Applicable 9

1445 Rim Lock 1445 Rim Lock only 5249 Pressed Brass Knob Furniture only (specify with 1445 as required) Grading Standard Quality Application Suitable for single action doors, hinged left and right, opening inwards only Suitable for doors from 32mm to 50mm thick 1445BJ 5249PL Specifications Product References Case and Staple Material Rim Lock Finish 1445BJ - Rimlock only Pressed Steel 1445BJ (Black Powder Coated) Latch Bolt Brass Dead Bolt Brass Keying Options Available Keyed to Differ (ie Standard) Differs 10 Standard Differs R4F to R13F Knob Furniture Material and Finish 5249PL - (Pressed Brass Polished) PWD Reference Number Not Applicable 10