Secure Communications Product Brochure 01.01 R&S MKS9680 Modular Encryption Device Secure voice, fax and data transmission
R&S MKS9680 Modular Encryption Device At a glance The R&S MKS9680 is a highly secure device for encrypting voice, fax and data for transmission over analog and digital landline networks and satellite links. It meets even the most demanding requirements in terms of cryptographic security, emanation security and resistance to mechanical attacks, and is capable of operating in poor-quality networks. The R&S MKS9680 is a modular device, available in different configurations, and designed to support various use scenarios. The device is equipped with interfaces for operation in heterogeneous networks. The R&S MKS9680 enables users to communicate securely over the following types of networks: Analog networks Digital, circuit-switched networks IP networks (in combination with the R&S IP-GATE) BGAN and Thuraya satellite links The R&S MKS9680 has been optimized to deliver secure voice, fax and data communications, even in difficult signal environments. For this purpose, it automatically selects the optimum data rate to provide the best possible transmission quality. Key facts Modular design enables flexible adaptation to available interfaces Convincing transmission quality in poor-quality networks Chip-card-based authentication for enhanced security Highly secure communications worldwide using landline networks and satellite links Tamper-protected casing to guard against mechanical attacks Version with analog interfaces and digital Euro-ISDN interfaces. 2
R&S MKS9680 Modular Encryption Device Benefits and key features Highly secure communications for diverse operating scenarios Fulfills the highest confidentiality requirements Supports a wide range of applications and transmission protocols Usable anywhere from cities to remote regions page 4 Sophisticated security concept allows straightforward key management Cryptographic control is in the hands of the customer Secure authentication of users based on smart cards Consistently high level of security within networks due to individually secured communications relationships page 5 Tamper-proof, versatile hardware Modular design supports multiple network scenarios with a single device Physical protection A range of interfaces page 6 Rohde & Schwarz R&S MKS9680 Modular Encryption Device 3
Highly secure communications for diverse operating scenarios Fulfills the highest confidentiality requirements The R&S MKS9680 sets new standards internationally for the secure transmission of sensitive information. Its security features encompass cryptographic and mechanical protection as well as the ability to support organizations' own security policies. The R&S MKS9680 employs strong cryptographic algorithms with key lengths as required today in many countries to effectively secure government communications. The device creates the necessary key material using a hardware-based noise generator. To protect the cryptographic functionality as well as confidentiality and integrity, the R&S MKS9680 has been ruggedized. Besides guarding the device against physical manipulation, the ruggedization also protects it against emanation attacks. Supports a wide range of applications and transmission protocols The device can be used to protect various types of realtime transmissions, including voice, data and video. The R&S MKS9680 additionally includes store-and-forward capabilities for the secure transmission of faxes and short messages. It can also be used in heterogeneous network infrastructures. The device is modular and, depending on the version, has both analog and digital interfaces. The R&S MKS9680 can also operate in IP networks when combined with the R&S IP-GATE. Together, these capabilities give users a maximum degree of independence from the diverse transmission protocols employed in today's landline and satellite communications, and allow cross-network communications that are secured from end to end. Usable anywhere from cities to remote regions Network quality can vary enormously from region to region. In cities, high-bandwidth, high-quality connections with low error rates are usually available, but in remote regions the opposite is often the case. To enable consistently stable communications within a system, the R&S MKS9680 implements robust procedures and protocols (including V.32) that identify the effective bandwidth available and adjust the throughput automatically. The device uses forward error correction (FEC) on data links and error correction mode (ECM) with fax transmissions. Store-and-forward functionality enables time-shifted operations Network MKS9680 transfer software (short messages and file transfer) Encrypted storage: MKS9680 transfer software Message/file is decrypted and (short messages and file transfer) forwarded to target system. At target site, PC with R&S MKS9680 transfer software running must be connected to R&S MKS9680, and authentication card must be inserted in R&S MKS9680 Network Fax machine Fax machine Encrypted storage: Fax is decrypted and forwarded to target system. At target site, fax machine must be connected to R&S MKS9680, and authentication card must be inserted in R&S MKS9680 4
Sophisticated security concept allows straightforward key management Cryptographic control is in the hands of the customer Production of the R&S MKS9680 (carried out in dedicated Rohde & Schwarz facilities in Germany) and first-time cryptographic initialization of the device are two separate and independent processes. A device's unique cryptographic identity is set by the customer using a special smart card in a one-time operation performed in a secure environment. In subsequent operation, the user authentication process and the keys provisioned by the system are based on this cryptographic identity. Secure authentication of users based on smart cards Users authenticate themselves to the R&S MKS9680 using a special smart card that they insert into the device's builtin card reader. This smart card is assigned cryptographically to both the user and the device. If need be, a user's card can also be assigned to additional R&S MKS9680 devices. Consistently high level of security within networks due to individually secured communications relationships A central crypto management system allows separate key material to be generated for any predefined communications relationship. The central crypto management also sets the period of validity for the key material for each individual communications relationship. R&S MKS9680 devices change the key material automatically, depending on the material's defined validity. Based on the key material generated for each communications relationship, a new session key is generated for each connection. The session key is generated using the challenge-response method and is deleted when the connection is cleared. With this approach, individual connections running over the same network are also secured against one another. The consistent use of smart cards based on the devices unique cryptographic identity simplifies key management and effectively prevents unintentional misconfiguration of the overall system. Security architecture based on individually secured communications relationships CR key AC Headquarters (A) CR key AB Encrypted with session key AB nx Encrypted with session key AC ny Site (B) CR key AC Site (C) CR key AB Rohde & Schwarz R&S MKS9680 Modular Encryption Device 5
Tamper-proof, versatile hardware Modular design supports multiple network scenarios with a single device The R&S MKS9680 comes with diverse network interfaces (analog and digital). This allows the R&S MKS9680 to adapt easily to users' specific needs and requirements as well as changes in communications environments, and thus affords high safety of investment. Physical protection The R&S MKS9680 incorporates intelligent engineering to detect and ward off mechanical attacks. The modules are separated from one another, and the casing is tamperproof to prevent mechanical attacks on the device and its built-in security functions. Separating the modules also serves to shield individual circuits and the entire device electrically and electromagnetically to provide effective protection against side-channel attacks. A range of interfaces Irrespective of the type of network available at the point of use analog or digital users can always connect the same terminal equipment and need not worry what kind of network their counterpart is using: The R&S MKS9680 automatically chooses the right transmission technology. The graphic depicts a typical use scenario for the R&S MKS9680. The device provides the right interface for each type of terminal equipment. Even if the R&S MKS9680 is connected to an analog network, an ISDN handset can still be plugged into the digital terminal interface and used to make a call. A Group 3 fax machine can be connected to the analog interface, a PC to one of the USB ports. If two devices are communicating over a digital network, a 64 kbps channel is set up automatically. If a call is connected to another R&S MKS9680 in an analog network, the device sets up a modem connection. The R&S MKS9680 uses optimized procedures for satellite communications. The R&S IP-GATE expands the communications capabilities of the R&S MKS9680 for operation in IP networks. Security architecture based on individually secured communications relationships IP networks, SatCom, ISDN, analog networks MKS9680 MKS9680 MKS9680 6
Specifications Specifications of the R&S MKS9680 Interfaces Analog 1 Digital 1 Euro-ISDN (two B channels) SatCom BGAN over ISDN BGAN/IP over R&S IP-GATE Thuraya/IP over R&S IP-GATE Landline IP over R&S IP-GATE Encryption Symmetric algorithm AES256 General data Dimensions (W x H x D) 190 mm 220 mm 170 mm (7.5 in 8.7 in 6.7 in) Weight 7.6 kg (16.8 lb) Operating temperature range +10 C to +40 C Transportation temperature range 10 C to +60 C Power supply AC supply voltage 115 V/230 V AC Power consumption approx. 15 W Ordering information Designation Type Order No. R&S MKS9680 Encryption device with analog interface and digital Euro-ISDN basic rate interface R&S MKS9680 5415.0671.04 Transfer software for the R&S MKS9680 R&S MKS9680Transfer-SW 5415.1910.02 Management system Key management software R&S MKS0810 5415.2168.03 Hardware-based true random number generator R&S MKS0606 5415.0365.02 Smart card read/write device R&S MKS0707 5415.0007.02 Smart card (installation, authentication and key card) R&S MKS0503 5415.1778.02 Rohde & Schwarz R&S MKS9680 Modular Encryption Device 7
Service you can rely on J Worldwide J Local and personalized J Customized and flexible J Uncompromising quality J Long-term dependability About Rohde & Schwarz Rohde & Schwarz is an independent group of companies specializing in electronics. It is a leading supplier of solutions in the fields of test and measurement, broadcasting, radiomonitoring and radiolocation, as well as secure communications. Established more than 75 years ago, Rohde & Schwarz has a global presence and a dedicated service network in over 70 countries. Company headquarters are in Munich, Germany. Environmental commitment Energy-efficient products Continuous improvement in environmental sustainability ISO 14001-certified environmental management system Certified Quality System ISO 9001 Rohde & Schwarz SIT GmbH Am Studio 3 D-12489 Berlin Phone +49 30 65884-223 Fax +49 30 65884-184 E-mail: info.sit@rohde-schwarz.com www.sit.rohde-schwarz.com www.rohde-schwarz.com Regional contact Europe, Africa, Middle East +49 89 4129 123 45 customersupport@rohde-schwarz.com North America 1 888 TEST RSA (1 888 837 87 72) customer.support@rsa.rohde-schwarz.com Latin America +1 410 910 79 88 customersupport.la@rohde-schwarz.com Asia/Pacific +65 65 13 04 88 customersupport.asia@rohde-schwarz.com R&S is a registered trademark of Rohde & Schwarz GmbH & Co. KG Trade names are trademarks of the owners Printed in Germany (ch) PD 5214.4042.12 Version 01.01 May 2011 R&S MKS9680 Data without tolerance limits is not binding Subject to change 2011 Rohde & Schwarz GmbH & Co. KG 81671 München, Germany 5214404212