Motion Activated Still Images or Video View on Smartphone or PC Long Range Wireless Long Battery Life Free RF Transmission Invisible IR Flash at Night Easy and Quick to Setup Add up to 254 Cameras How do they work? When a camera detects motion, a picture or video is immediately taken and transmitted to a base receiver. Up to 254 cameras can be assigned to one base. Several different base options are available. Pictures and videos may be viewed on a personal computer, smartphone or mobile device by using the X-Series Network Manager software application. The cameras are powered with rechargeable lead acid batteries and can take thousands of pictures on a single charge. Optional solar panel chargers are available to extend battery life indefinitely. The camera and battery pack are housed in watertight, weatherproof enclosures for reliable outdoor operation. The cameras can be up to two miles (line of sight) from the base using standard antennas. The transmission distance can be increased to several miles using high gain antennas or by repeating through other cameras. Product Brief, v2.3 Page 1 of 8
PC Base Connects to a computer with a USB connection. Control all camera settings with X-Series Network Manager. Receive pictures or videos from up to 254 cameras with X-Series Network Manager. Pictures and videos may be automatically emailed. Pictures and videos may be automatically uploaded to our secure LiveCam website. Transmission distance can be up to 2 miles with standard antennas. Transmission distance can be increased with high gain antennas or by using repeaters. NO monthly fees. Cellular service is NOT required. Best choice when there is a personal computer within 2 miles of at least one camera. Product Brief, v2.3 Page 2 of 8
Cell Base Uses a cellular connection to connect to a computer located anywhere in the world. Control all camera settings with X-Series Network Manager. Receive pictures or videos from up to 254 cameras with X-Series Network Manager. Pictures and videos may be automatically emailed. Pictures and videos may be automatically uploaded to our secure LiveCam website. Only one cellular data plan is required for up to 254 cameras. Works with most major cellular carriers. Best choice when a personal computer is NOT available within 2 miles of at least one camera and it is NOT possible to visit the cameras to retrieve pictures. Product Brief, v2.3 Page 3 of 8
Net Base Uses a network / Internet connection to connect to any computer on the network. Control all camera settings with X-Series Network Manager. Receive pictures or videos from up to 254 cameras with X-Series Network Manager. Pictures and videos may be automatically emailed. Pictures and videos may be automatically uploaded to our secure LiveCam website. Best choice when a network connection is available within 2 miles of at least one camera and the computer receiving the pictures must be located at a different site. Product Brief, v2.3 Page 4 of 8
Camera Base Camera acts as a base. Can also take pictures and videos just like a normal camera. Can receive pictures or videos from up to 254 remote cameras. Pictures and videos are stored on an SD card inside the Camera Base. Transmission distance can be up to 2 miles with standard antennas. Transmission distance can be increased with high gain antennas or by using repeaters. NO monthly fees. Cellular service is NOT required. Best choice when a computer is NOT available within 2 miles of at least one camera and it is possible to visit the Camera Base to retrieve the pictures. Product Brief, v2.3 Page 5 of 8
Camera Specifications use a 5 Megapixel image sensor. If there is enough available light, the camera will take a color picture (or video). If there is not enough available light, a black and white infrared picture (or video) will be taken. The infrared flash is invisible to the human eye. Power is supplied to the camera from an external battery pack. The battery pack contains a 12V sealed lead-acid type battery. A bracket and spring buckle strap attach to the back of the enclosures to allow for easy mounting. The 12V SLA battery pack may be placed on the ground. This typically makes it easier to conceal in weeds or bushes. The camera and battery pack are housed in watertight, weatherproof enclosures for reliable outdoor operation. The standard color is matte black. Optional camo finishes are available in both desert and woodland patterns. Product Brief, v2.3 Page 6 of 8
Camera Specifications Camera Specification Table 1 Picture Format Video Format Video Frame Rate Video Length Motion Detector Type Motion Detector Range 2 Motion Detector Detection Angle 3 Reaction Time 4 Delay Between Pictures Stamps on Picture Additional Optional Settings 5 RF Transmission Range 6 Transmission Speed 6 Maximum allowable antenna gain Number of Cameras Assigned to One Base Operating Temperature Battery Type Solar Panel Communication Frequency Band Transmitter Output Power Spread Spectrum Regulatory Approvals FCC (USA) IC (Canada) C-Tick (Australia) Anatel (Brazil) User Selectable. 5 Megapixel (Mp), 3 Mp HD, 3Mp 1080 HD, 1 Mp, 720 HD, 0.3 Mp 640 x 360 pixels Up to 15 frames per second. 5 to 60 seconds. Passive Infrared (PIR) User adjustable. Up to 100 feet Approximately 10 degrees 0.2 Seconds User selectable. 1 second to 2 hours. User selectable. Date, Time, Temperature, Moon Phase, and 2 custom text fields. Custom camera schedules. Time lapse photography. Pictures or video emailed or uploaded to secure LiveCam Web-site. 2 miles (standard antennas) Distance may be increased with high gain antennas and / or repeaters. Up to 8 kilo bytes per second (Approx. 6 sec for 0.3Mp picture) 15.1 dbi (including cable losses) Up to 254-40 to 140 F 12V SLA UB1270 sold separately Optional solar panels sold separately 902 to 928 MHz, software selectable channel mask for interference immunity Up to 250 mw FHSS MCQ-XB900HP 1846A-XB900HP Yes Pending 1 Specifications are subject to change and may not be available in all firmware or software versions. 2 Motion detector range may be affected by camera mounting angle and ambient temperature. 3 Approximately the center of camera field of view. 4 Time from the moment motion is detected until the picture (or video) is captured. 5 An optional LiveCam account requires a paid subscription. Email and LiveCam are available with Cell Base and PCBase only. 6 Transmission range and speed will depend on the type of antennas that are used, the surrounding terrain and amount of interference received. Product Brief, v2.3 Page 7 of 8
Other X80 Devices The Buckeye Cam X80 Series includes wireless cameras, sensors, repeaters, and actuators. All of the available devices work seamlessly together and may be controlled and monitored with the X-Series Network Manager software application. The X80 Echo may be used for any of the following functions: Extending the transmission range of wireless cameras Extending the motion detection range of wireless cameras Triggering multiple wireless cameras from one motion sensor Triggering a single wireless camera from multiple motion sensors Sending a wireless alert when motion is detected at gates, driveways, etc. Interfacing with other sensor types (i.e. magnetometer, seismic, pressure pad, etc.) The X80 Wireless Feeder Controller can replace the timer / controller on most of the commonly available deer and game feeders. This will allow all of the following parameters to be controlled and monitored wirelessly using the X-Series Network Manager software application. Weekly Feed Schedule Feed Duration Motor Speed Battery Voltage Motor Status Feed Level For more information visit, www.buckeyecam.com or call toll free at: 866-325-8172 Product Brief, v2.3 Page 8 of 8