The Right Connection for WIRELESS SOLUTIONS Make the Right Connection for Industrial Wireless Solutions
An Expanding Range of M2M Wireless Product Solutions from B&B Electronics B&B Electronics has been expanding and reinforcing its reputation as a global source for best-in-class rugged, reliable network and data communications roducts for more than three decades. And today, increasingly, wireless is the solution of choice for M2M device connectivity. Our advanced engineering teams are designing and building solutions for Cellular, Wi-Fi and RF networks. Whether you consider embedding modules directly into your equipment, look to wireless as a cable replacement strategy for legacy equipment communications, or are looking for the right technology to extend the edge of your network, B&B Electronics has the hardware solutions you need. Even the most remote assets can be successfully networked, both indoors and out. Just as important, we back them up with world-class technical support available online, on the phone and in the field. Our Tech Support department is dedicated to helping you envision scope, and structure your wireless device connectivity challenge.with a broad offering and deep field experience, you get the options you want and the service you expect. Our solution platforms are deployed in hundreds of diverse applications, including power and energy monitoring, water and wastewater processing, facility management, system control and data acquisition (SCADA), test and measurement, transportation, security, transaction management, medical equipment, remote asset management and a vast array of industrial monitoring and control processes.
WIRELESS SOLUTIONS 888.948.2248 www.bb-elec.com Conel Cellular Routers Conel Wireless Routers Ensure secure, high-speed, wireless connections to remote sites and end-user devices like utility meters, process gauges, IP security cameras and ATMs with Conel s cellular GSM and 3G routers. Use them for reliable primary wireless network connectivity to Ethernet and/or serial equipment at remote locations, as well as for backup to existing landline communications. GPRS / EDGE / UMTS / HSDPA / HSUPA / HSPA+ routers GSM/3G routers are equipped with 10/100 Ethernet port and optional interfaces (RS-232, RS-422, RS-485, MBUS or I/O) Conel Cellular Wireless Modems Conel Wireless Modems Choose from B&B s broad range of Conel secure wireless communication modems to connect cellular networks to Ethernet, serial and other data networks. Conel products are designed with an emphasis on plug-and-play user convenience and simplicity. Well suited for both small and large networks Widely used in industries such as water management and heat industry, power and energy industries, transportation, etc. High flexibility at a low price High-speed 3G communication technology supports cameras installed in transportation/logistic or security systems wirelessly or wireless transfer of large amounts of data between PC/WAN/LAN
WIRELESS SOLUTIONS Wi-Fi Access Points, Ethernet Bridges, Routers and Serial Device Servers Quatech/Airborne ABDG Series industrial wireless Ethernet client bridges and device servers/routers simplify networking equipment in M2M applications. Wide temperature (-40 to +85 C), environmental specifications Plug-n-play serial and Ethernet to 802.11b/g connectivity Enterprise Class wireless security (WPA2/WPA-Enterprise, WPA2/WPAPre Shared Key, WEP, Open, EAP, 802.11i) Airborne Management Center - device discovery, control, management Variable 5-36 VDC power supply, screw terminal connectors (industrial models) 2 kv serial ESD surge suppression Airborne SpeedLink roaming for enhanced connection reliability Supports Airborne Portflex technology for advanced port configuration and routing Advanced delivery and on-board storage of Certificates Compact form factor in a rugged metal box M2M Access point & Wireless Router with Serial Device server support Antennas and Components Components to Complete the System Everything you need to configure your wireless installation, including software and firmware, cables, antennas, mounting brackets, lightning arrestors, and other components are available as part of the complete B&B Electronics solution. Optional antennas for long range applications High gain, Yagi and omni-directional antennas for indoor or outdoor use Antenna cables in lengths from 6 inches to 50 feet Easy to mix and match the cable connectors you need Lightning arrestors help protect your wireless system investments Rugged housing and plated brass connectors ensure longer lightning arrestor life Accurately predict the range of your wireless system in 60 seconds or less with our free online Wireless Range Estimator: www.bb-elec.com/wirelessrangeestimator tor
888.948.2248 www.bb-elec.com Wi-Fi Embedded Modules Quatech/Airborne WLNG Series Embedded Wi-Fi Embed Wi-Fi connectivity in your OEM product designs with these compact, single-board Quatech/Airborne WLNG Series modules. Wide operating temperature (-40 to +85 C) Enterprise Class wireless security (WPA2/WPA-Enterprise, WPA2/WPAPreShared Key, WEP, Open, EAP, 802.11i) 32-bit ARM9 processor with 802.11bg radio for increased range and throughput Form, fit and function compatible with all earlier generations (DP101, DP501) Airborne Management Center discover, control, manage devices Advanced low power modes for power save applications M2M Access point & Wireless Router with Serial Device server support
WIRELESS SOLUTIONS Radio Modems and Wireless I/O Zlinx Radio Modems and Wireless I/O Zlinx standard and Zlinx Xtreme products are indoor/outdoor, rugged wireless solutions with simple plug-and-play set-up. Modbus and Profibus compatibility mean no additional converters are required. Connect multiple serial devices in one-to-one or one-to-many configurations, monitor remote I/O devices in a peer-to-peer configuration, or connect multiple devices to a Modbus RTU master. Zlinx Industrial Indoor 2.4GHz short range, 900MHz (C1/D2) long range IP30 ingress protection rated Top of the line AES security Wide temperature range (-40 to +80 C) Low latency response rates Modbus compatible Radio Modems and Wireless I/O Zlinx Radio Modems and Wireless I/O Zlinx standard and Zlinx Xtreme products are indoor/outdoor, rugged wireless solutions with simple plug-and-play set-up. Modbus and Profibus compatibility mean no additional converters are required. Connect multiple serial devices in one-to-one or one-to-many configurations, monitor remote I/O devices in a peer-to-peer configuration, or connect multiple devices to a Modbus RTU master. Zlinx Xtreme Outdoor 2.4GHz short range, 900MHz (C1D2) long range IP67 rated direct machine mount (no cabinet needed) Top of the line AES security Best in class latency Flexible configuration for multiple types of analog/digital I/Os Modbus compatible Dual power, 10-40VDC or 24VAC
888.948.2248 www.bb-elec.com High-Speed Wireless Ethernet Bridge Secure, Long-Range Ethernet Fast, easy and secure high-speed wireless Ethernet right out of the box. Zero set-up just aim it, mount it and plug it in. 80, 15 dbi sector antenna integrated into the housing 5GHz radio built from 802.11n 2X2 MIMO technology for long range connectivity (15 km/9 miles) Temperature range of -30 to +80 C Wireless Products Backed Up by Global Communications Expertise Our Technical Support team has field-proven experience in wireless communication applications, connectivity solutions, network design and product installation. Whether you have a simple application question, a complex project installation, or an outside-the-box problem, B&B Electronics engineers won t just troubleshoot problems after the fact they can actually prevent and anticipate system design and integration problems before they begin. All of our wireless data communications solutions are backed by our comprehensive Quality Assurance program and a full five-year warranty. UV stable plastic case rated for outdoor use Maximum data rate of 150 Mbps
Wireless Products Backed Up by Global Communications Expertise Find B&B Products in More Than 60 Countries Around the World Talk to your favorite distributor about B&B Electronics products, or to find a channel partner near you, please go to www.bb-elec.com. Learn how B&B Electronics can create a wireless-based solution for you by visiting us online or contacting us directly. Global Reach for Global Support In addition to our U.S. manufacturing, distribution, and customer support operations, we have a manufacturing facility located in the Czech Republic. Our European headquarters in Ireland provides service, support and product availability for customers in Europe, the Middle East, and Africa through a network of more than 40 qualified distributors. Our global network of distributors helps ensure fast, comprehensive and local customer service and support. B&B Electronics products are also available around the world through our expanding network of channel partners, including value-added resellers and system integrators. Learn how B&B Electronics can create a wireless-based solution for you by visiting us online or contacting us directly. Worldwide Headquarters Technical Support 1-800-346-3119 Customer Service & Sales 1-888-948-2248 Email orders@bb-elec.com www.bb-elec.com European Headquarters Technical Support +353 91 792444 Customer Service & Sales +353 91 792444 Email esales@bb-europe.com www.bb-europe.com Conel s.r.o. Phone +420 465 521 020 GSM +420 603 872 287 Email info@conel.cz 2212-B