SECURITY SYSTEM COMPONENTS & ACCESSORIES PRODUCT CATALOGUE 2011 1
Contents About Us 4 Structure of anti-theft system 4 Power system for the secured devices 5 Multimedia Presentation System 6-7 Control units and accessories 8-11 Sensors XA 12-13 XL 14 XU 15-16 XC 17 XT 18 XB 19 XF, XFD 20-21 XFP, XFPD 22-23 XN, XNP, XND, XNPD 24-25 XNS, XNSP, XNSD, XNSPD 26-27 XM, XMP, XMD, XMPD 28-29 XR, XRP, XRD, XRPD 30-31 Charging cables 32-35 Stickers 36 Others 37-38 3
About Us XTRIM was established in 2000. We specialize in production of electronic equipment for shops used to secure goods and support sale. We manufacture wire anti-theft system (security leash) enabling safeguard of products presented on open displays. A wide range of specialized sensors allows the system to secure a wide variety of goods. Besides production we also provide installation services of the manufactured equipment. Our customers are mainly large retail chains of radio & television and household appliances branch. During the first years of our business activity we have operated only on the domestic market, at present over 80% of our sales is export. Due to many years experience we are in the position to offer products fully meeting the expectations of our customers. We are always open to individual needs and suggestions that help us make our products even more useful. Structure of anti-theft system The system consists of control units connected to sensors adapted to match a specific commodity. The sensors are fastened to the products and most of them are simultaneously clampers enabling for attractive display of the devices. Each event of commodity detachment, sensor disconnection, cut-off or wires shorting results in alarm activaction. A particularly important issue in large stores is prompt localisation of the place of alarm occurrence. Therefore, our control units are equipped with outputs allowing the transfer of alarm signal to an information board usually located in a monitoring room. The data displayed on the board enables for instant response of the security service. This solution significantly improves the safeguard of goods against theft. Apart from protection our anti-theft system allows for power supply and multimedia presentation of the protected devices. 4
Power system for the secured devices In addition to the security function our anti-theft system provides also a possibility to supply power to the secured devices. This enables the customer not only to see the device but also test it. Power is supplied from the control unit to the sensor. Sensors with power supply function are equipped with a socket where a cable is connected matching the presented device. The function is particularly useful when presenting cellular phones, MP3/MP4 players or GPS equipment. The charging system consists of the following elements: AXP, AXP-K, AXPD, AXPD-K series control units XFP, XFPD, XNP, XNPD, XNSP, XNSPD, XMP, XMPD, XRP, XRPD sensors charging cable adjusted to the protected device The charging cable is also anti-theft protection AXP 16 control unit XNP 02 sensor charging cable C NK 02 5
Multimedia Presentation System Apart from the standard protection function, the anti-theft system we manufacture additionally has the possibility to display advertisements and multimedia presentation connected with the protected products. Presentation display function is performed by means of the following equipment: control units with presentation function, marked with the letter D sensors with presentation function, marked with the letter D a PC with installed XPM XTRIM Presentation Manager application The system operational principle: protected products are placed on appropriate sensors which quarantee constant protection and power supply when necessary by means of an additional sensor hidden in the sensor s case lift of the item by the customer is detected signal from the control unit is forwarded to a computer in which the XPM application starts the presentation referring to the lifted product The XPM XTRIM Presentation Manager application performs the following tasks: assigning adequate presentations to protected items. Presentation files can be stored on local disk or in the net. Presentation display is possible in various formats, among others, PPS, PPT, SWF, PDF, JPG, BMP, AVI, MPEG, FLASH and website. Display of a random presentation when no item is lifted. display of the selected presentation after the product has been lifted by the customer managenent of presentation display when several products are lifted simultaneously display of a suitable warning in case of alarm occurrence registering incidents connected with statistics display Registered are the moment the product is lifted and presentation duration. It enables to create a register of incidents as well as presentation of statistics in a graphic form. During statistics display it is possible to apply filters allowing to display data according to the assigned criterion. Due to the above mentioned functions the application supplies essential information on the customer s interest in particular products, number of customers visiting a given stand at particular hours and on particular days, etc. registering all incidents connected with product protection- induced alarms, control unit on and off switching, AC dump, which allows for more effective product protection 6
Multimedia Presentation System Introduction of multimedia presentation system brings numerous advantages: continually available for the customer precisely selected information on the product without the necessity to engage the staff attractive presentation of the product effective and low-cost advertisement possibility to analyze customers interest in particular products thanks to the statistics module increased level of product safety due to incidents register 7
Control units and accessories Our control units are easy to install and configure, simple to operate and friendly to use. Thanks to a wide range of available devices it is easy to configurate the equipment to the requirements of a given installation. The control units family consists of 8 groups based on a single hardware-software architecture which differ from each other the maximum number of connected sensors and functions. AX AX-K AXD AXD-K AXP AXP-K AXPD AXPD-K AXM 4 Number of inputs 4, 8, 16 24, 32 4, 8, 16 24, 32 4, 8, 16 24, 32 4, 8, 16 24, 32 4, 8, 16 4, 8, 16 4, 8, 16 4, 8, 16 4 Security Leash System Power Supply Function Multimedia Presentation Function Additional mechanical key Dimensions [mm] 190 x 140 x 50 110x65x27 Our control units have also the following features: number of inputs: 4, 8, 16, 24, 32 controlled via radio remote control with a dynamic code mains supply with emergency rechargeable battery backup battery operable optical and acoustic alarm indication automatic activation which makes it impossible to leave the commodity unprotected indication of sensor disconnection during stand-by mode off additional mechanical key relay output additional siren output outputs for monitoring system digital display output AC/DC adaptor, emergency rechargeable battery supply and remote controller included. 8
Control units and accessories AX 4/8/16/24/32 AXP 4/8/16 AXD 4/8//16/24/32 AXPD 4/8/16 AX-K 4/8/16/24/32 AXP-K 4/8/16 AXD-K 4/8/16/24/32 AXPD-K 4/8/16 9
Control units and accessories A XM 4 A SD G, A SD B Mini control unit equipped with 4 alarm inputs, controlled with a mechanical key, mains or battery supply. AC/DC adaptor and an emergency rechargeable battery supply included Signaling diode. Indicator of alarm central unit status: a normal work, switched off, no power supply and a low battery voltage are indicated A RC 1 A PS 1205 Spare remote controller for control units Spare AC/DC adapter 12V 0,5A for AX, AX- K, AXD, AXD- K control units A PS 125 A PS 902 Spare AC/DC adapter 12V 5A for AXP, AXP- K, AXPD, AXPD- K control units Spare AC/DC adapter 9V 0,2A for AXM 4 control units 10
Control units and accessories A AD 01 A PR Additional siren for control units Remote controller programmer for control units A LD 01 Numeric display for control units 11
XA sensors DVD players car GPS navigations loudspeaker systems Hi-Fi systems game consoles Suitable for: car audio equipment cordless telephones shavers walkie- talkies electrical tools weather stations computer accessories CB radio Application examples XA 01 XA 02 XA 03 Universal sensor with a LED indicator, a straight cable 2m Universal sensor without a LED indicator, a spiral cable 20 cm Universal sensor without a LED indicator, a straight cable 35 cm 12
XA sensors XA 04 XA 05 XA 06 Double sensor with a LED indicator, a straight cable 2 m Double sensor with a LED indicator, a spiral cable 30 cm between sensors, a straight cable 2 m Double sensor with a LED indicator, 2 x straight cable 40 cm XA 07 XA 08 XA 09 Double sensor with a LED indicator, straight cable 40 cm + spiral cable 20 cm Double sensor with a LED indicator, 2 x spiral cable 20 cm Universal sensor with a LED indicator, a spiral cable 50 cm 13
XL sensors SUITABLE FOR: binoculars game racing wheels boomboxes electrical tools headphones bottles Application examples XL 01 XL 02 Clamping sensor with a screw, a straight cable 2 m Clamping sensor with a screw, a spiral cable 50 cm XL 03 XL 04 Loop sensor with a straight cable 2 m Loop sensor with a spiral cable 50 cm 14
XU sensors SUITABLE FOR: notebooks printers 3D glasses Application examples XU 01 XU 02 Sensor to protect devices equipped with a USB A socket, a straight cable 2 m Sensor to protect devices equipped with a USB A socket, a spiral cable 30 cm 15
XU sensors XU 03 XU 04 Sensor to protect devices equipped with a USB B socket, a straight cable 2 m Sensor to protect devices equipped with a USB B socket, a spiral cable 30 cm XU 07 XU 08 Sensor with power supply function to protect devices equipped with a Micro USB socket, a straight cable 2m Sensor with power supply function to protect devices equipped with a Micro USB socket, a spiral cable 50 cm XU 09 XU 10 Sensor with power supply function to protect devices equipped with a Mini USB socket, a straight cable 2m Sensor with power supply function to protect devices equipped with a Mini USB socket, a spiral cable 50 cm 16
XC sensors SUITABLE FOR: camcorders digital cameras SLR cameras XC 01 Application examples Sensor for camcorders and digital cameras, using a tripod socket, a straight cable 2 m XC 02 XC 03 XC 04 Sensor for camcorders and digital cameras, using a tripod socket, a spiral cable 30 cm. Sensor for camcorders and digital cameras with an additional universal sensor, a straight cable 2 m Sensor for camcorders and digital cameras with an additional universal sensor, a spiral cable 30 cm For XC sensors insulating pad P PI 1, screw P SK 1, upper grip P KK 1 and lower grip P PK1 are used. 17
XT sensors SUITABLE FOR: clothing Application examples XT 01 XT 02 Sensor to protect clothing with a LED indicator, a spiral cable 50 cm Sensor with a LED indicator to protect clothing equipped with a 2m straight cable loop, a spiral cable 50 cm 18
XB sensors SUITABLE FOR: bluetooth headsets small MP3/MP4 players small accessories Application examples XB M1 XB 01 XB 02 Magnetic base for XB sensors Magnetic holder - a sensor for small devices Universal sensor equipped with a magnet, designed to be used with XB M1 magnetic base, a spiral cable 20 cm XB 03 Universal sensor equipped with a magnet, designed to be used with XB M1 magnetic base, a straight cable 2 m 19
XF, XFD sensors SUITABLE FOR: digital cameras SLR cameras camcorders car GPS navigations XF 01 XF 02 XF 03 XF 04 XF 05 XF 06 XF 07 XFD 01 XFD 02 XFD 03 XFD 04 XFD 05 XFD 06 XFD 07 One microswitch Two microswitches Screw Additional universal sensor Security loop socket Multimedia presentation function Dimensions [mm] Base: 64 x 49 x 18; Sensor: 45 x 32 x 15 Application examples 20
XF, XFD sensors XF 01, XDF 01 XF 02, XDF 02 XF 03, XDF 03 XF 04, XDF 04 XF 05, XDF 05 XF 06, XDF 06 XF 07, XDF 07 21
XFP, XFPD sensors SUITABLE FOR: digital cameras SLR cameras camcorders car GPS navigations XFP 02 XFP 03 XFP 05 XFP 06 XFP 08 XFP 09 XFPD 02 XFPD 03 XFPD 05 XFPD 06 XFPD 08 XFPD 09 One microswitch Screw Additional universal sensor Security loop socket Charging socket Multimedia presentation function Dimensions [mm] Base: 64 x 49 x 18; Sensor: 45 x 32 x 15 Application examples 22
XFP, XFPD sensors XFP 02, XFPD 02 XFP 03, XFPD 03 XFP 05, XFPD 05 XFP 06, XFPD 06 XFP 08, XFPD 08 XFP 09, XFPD 09 23
XN, XNP, XND, XNPD sensors SUITABLE FOR: cellular phones MP3/MP4 players translators car GPS navigations calculators remote controllers PDA tools shavers epilators digital thermometers XN XN XN XN XN XNP XNP XNP XNP XNP XND XND XND XND XND XNPD XNPD XNPD XNPD XNPD 01 02 03 04 05 01 02 03 04 05 01 02 03 04 05 01 02 03 04 05 Single sensor Additional universal sensor Two additional universal sensors Security loop socket Charging socket Multimedia presentation function Dimensions [mm] Base: 64 x 49 x 18; Sensor: 45 x 32 x 15 Application examples 24
XN, XNP, XND, XNPD sensors XN XNP XND XNPD Security leash system Power supply of secured devices Multimedia presentation system XN 01, XNP 01, XND 01, XNPD 01 XN 02, XNP 02, XND 02, XNPD 02 XN 03, XNP 03, XND 03, XNPD 03 XN 04, XNP 04, XND 04, XNPD 04 XN 05, XNP 05, XND 05, XNPD 05 25
XNS, XNSP, XNSD, XNSPD sensors SUITABLE FOR: cellular phones MP3/MP4 players translators car GPS navigations calculators remote controllers PDA tools shavers epilators digital thermometers XNS XNS XNS XNS XNS XNSP XNSP XNSP XNSP XNSP XNSD XNSD XNSD XNSD XNSD XNSPD XNSPD XNSPD XNSPD XNSPD 01 02 03 04 05 01 02 03 04 05 01 02 03 04 05 01 02 03 04 05 Single sensor Additional universal sensor Two additional universal sensors Security loop socket Charging socket Multimedia presentation function Dimensions [mm] Base: 64 x 49 x 18; Sensor: 45 x 32 x 15 XNS XNSP XNSD XNPSD Security leash system Power supply of secured devices Multimedia presentation system Application examples 26
XNS, XNSP, XNSD, XNSPD sensors XNS 01, XNSP 01, XNSD 01, XNSPD 01 XNS 02, XNSP 02, XNSD 02, XNSPD 02 XNS 03, XNSP 03, XNSD 03, XNSPD 03 XNS 04, XNSP 04, XNSD 04, XNSPD 04 XNS 05, XNSP 05, XNSD 05, XNSPD 05 27
XM, XMP, XMD, XMPD sensors SUITABLE FOR: cellular phones MP3/MP4 players translators car GPS navigations calculators remote controllers PDA tools shavers epilators digital thermometers XM XM XM XM XM XMP XMP XMP XMP XMP XMD XMD XMD XMD XMD XMPD XMPD XMPD XMPD XMPD 01 02 03 04 05 01 02 03 04 05 01 02 03 04 05 01 02 03 04 05 Single sensor Additional universal sensor Two additional universal sensors Security loop socket Charging socket Multimedia presentation function Dimensions [mm] Base: 64 x 49 x 18; Sensor: 45 x 32 x 15 XM XMP XMD XMPD Security leash system Power supply of secured devices Multimedia presentation system Application examples 28
XM, XMP, XMD, XMPD sensors XM 01, XMP 01, XMD 01, XMPD 01 XM 02, MP 02, XMD 02, XMPD 02 XM 03, XMP 03, XMD 03, XMPD 03 XM 04, XMP 04, XMD 04, XMPD 04 XM 05, XMP 05, XMD 05, XMPD 05 29
XR, XRP, XRD, XRPD sensors SUITABLE FOR: cellular phones MP3/MP4 players translators car GPS navigations calculators remote controllers PDA tools shavers epilators digital thermometers XR XRP XRD XRPD Security leash system Power supply of secured devices Multimedia presentation system XR XR XR XR XR XRP XRP XRP XRP XRP XRD XRD XRD XRD XRD XRPD XRPD XRPD XRPD XRPD 01 02 03 04 05 01 02 03 04 05 01 02 03 04 05 01 02 03 04 05 Single sensor Additional universal sensor Two additional universal sensors Security loop socket Charging socket Multimedia presentation function Dimensions [mm] Base: 64 x 49 x 18; Sensor: 45 x 32 x 15 Application examples For XR, XRP, XRD, XRPD sensors a cable recoiler PR 02 must be used 30
XR, XRP, XRD, XRPD sensors XR 01 XRP 01 XRD 01 XRPD 01 XR 02 XRP 02 XRD 02 XRPD 02 XR 03 XRP 03 XRD 03 XRPD 03 XR 04 XRP 04 XRD 04 XRPD 04 XR 05 XRP 05 XRD 05 XRPD 05 P R 02 31
Charging cables C SA 01 C SA 02 C SA 03 Samsung 1 Cellular phones SAMSUNG: C140, C160, C250, C260, X180, WEP-150, WEP-170, WEP-180, WEP-200 Samsung 2 Cellular phones SAMSUNG: C170, C520, E250, E570, E590, E840, J600, U600, U700, Z170, Z720 Samsung 3 Cellular phones SAMSUNG: F210, F250, F330, F480, F600, F700, G800, i450, i550, i780, J200, J400, J700, J750, L760, P520, U900, i900 Omnia, M600 C SA 04 Samsung 4 Cellular phones SAMSUNG: E810, P730, S341i, Z110, S342i, Z130, Z500, ZM60, E620, Z500V, Z500, P730, E720, D720, ZV10, ZV30, i300, Z140 C SA 05 Samsung 5 Cellular phones SAMSUNG: A288, A300, A400, A800, C100, C110, C200, C210, C230, D410, D500, D600, E300, E310, E330, E330N, E340, E350, E360, E600, E630, E700, E710, E715, E730, E750, E760, E800, E820, E850, N500, N620, P100, P400, P510, R200s, R210s, R220, S200, S300, S500, T100, T400, T500, V200, X100, X200, X400, X450, X460, X480, X490, X600, X620, X640, X660, X800 C SA 06 Samsung 6 Samsung Galaxy Tab C NK 01 Nokia 1 Cellular phones NOKIA: all models with 2 mm socket; 1200, 1208, 1209, 1650, 2600 Classic, 2630, 2760, 3109 Classic, 3110 Classic, 3110 Evolve, 3120 Classic, 3250, 3500 Classic, 5070, 5200, 5300, 5310, 5500, 5610, 5700, 6070, 6080, 6085, 6086, 6101, 6103, 6110 Navigator, 6111, 6120 Classic, 6125, 6131, 6136, 6151, 6233, 6234, 6267, 6270, 6280, 6288, 6290, 6300, 6300i, 6301, 6500 Slide, 7360, 7370, 7373, 7390, 7500 Prism, 8800 Sirocco, E50, E51, E61, E61i, E65, E90, N70, N71, N72, N73, N76, N80, N81, N82, N90, N91, N92, N93, N93i, N95, N95 8GB 32
Charging cables C NK 02 Nokia 2 Nokia 2 all models with Micro USB socket C NK 03 Nokia 3 Cellular phones NOKIA: all models with 2 mm socket; 1200, 1208, 1209, 1650, 2600 Classic, 2630, 2760, 3109 Classic, 3110 Classic, 3110 Evolve, 3120 Classic, 3250, 3500 Classic, 5070, 5200, 5300, 5310, 5500, 5610, 5700, 6070, 6080, 6085, 6086, 6101, 6103, 6110 Navigator, 6111, 6120 Classic, 6125, 6131, 6136, 6151, 6233, 6234, 6267, 6270, 6280, 6288, 6290, 6300, 6300i, 6301, 6500 Slide, 7360, 7370, 7373, 7390, 7500 Prism, 8800 Sirocco, E50, E51, E61, E61i, E65, E90, N70, N71, N72, N73, N76, N80, N81, N82, N90, N91, N92, N93, N93i, N95, N95 8GB C MD 01 MDA 1 PDA devices equipped with MINI USB 5 pin socket HTC: Advantage X7500, Excalibur, Galaxy, MTeor, P3300, P3350, P3400, P3450, P3600, P4350, P5500, P6500, S310, S620, S710, Sirius, TyTN, TyTN II, Wizard Acer: C500, C510, C530, D155, D156, E305, E310, E360 Asus: P525, P526, P535, P735 HP ipaq: rw6818, rw6828, rx4240, rx4540, rx5700, rx5900 Dopod: 818, 818 Pro, 828, 838, C720W, C800, C858, CHT9000, D600, D810, M700, P100, P800W, U1000 i-mate: Jam, Jamin, JasJam, K-Jam MDA: Compact, Compact II, Compact III, Mail, Vario, Vario II Fujitsu Siemens Pocket LOOX - T810, T830 MiTAC Mio - 169, 180, A201, A501, A700, A701, P340, P350, P550 XDA: Atom, Cosmo, Flame, II Mini, II Mini Pro, Neo, Trion, IQ Qtek: 8300, 8310, 9100, 9200, 9600, G100, G200, S100, S110, S200 SPV: C500, C550, C600, E600, E650, M3000, M3100, M500, M560, M600, M700, M5000 T-Mobile: Ameo, Dasho SDA II other PDA devices C SE 01 Cellular phones SONY ERICSSON: all present devices C702i, C902, D750i, G700, G900, J100i, J110i, J120i, J220i, J230i, K200i, K220i, K310i, K320i, K510i, K530i, K550i, K610i, K630i, K660i, K750i, K770i, K790i, K800i, K810i, K850i, M600i, P1i, P990i, R300, V630, W200i, W300i, W580i, W610i, W660i, W700, W710i, W800i, W810i, W850i, W880i, W900i, W910i, W950i, W960i, Z520i, Z530i, Z550i, Z610i, Z710i Sony Ericsson 1 33
Charging cables C AL 01 C AP 01 C BQ 01 Alcatel 1 i-pod, i-phone Benq-Siemens 1 Alcatel 1 Cellular phones ALCATEL: OT 311, 332, 355, 511, 512, 525, 535, 556, 565, 711, 715, 735, 756, 757 i-pod, i-phone All APPLE ipod, iphone except ipod SHUFFLE Benq-Siemens 1 Cellular phones BENQ-SIMENS: S68, S88, EF81, EL71, C81, A31, A51, A58, AF51 C USB A 01 C USB M 01 C USB M 02 USB A Mini USB 5 pin, 200 ma Mini USB 5 pin, 800 ma USB A All devices equipped with USB А plug, e.g. MP3/MP4 Mini USB 5 pin, 200 ma All smaller devices equipped with MINI USB 5 pin socket, e.g. MP3/MP4 Mini USB 5 pin, 800 ma All larger devices equipped with MINI USB 5 pin socket, e.g. car GPS devices C MT 01 Motorola 1 Cellular phones MOTOROLA: MOTORAZR, V3, V3i, V3m, V3x, V3xx, MAXX V6, MOTORIZR Z3, Z6, Z8, MOTOKRZR K1, K3, MOTOROKR E6, MOTOMING A1200E, A1200R, W375, W380, W510, W205, W208, W218, W220, SLVR L7, L7i, L7e, L6i, PEBL U6, V235, V237, V360, V1100, A91 C MT 02 Motorola 2 Motorola 1 Motorola 2 Cellular phones MOTOROLA: F3 34
Charging cables C MT 03 C LG 01 LG 1 Cellular phones LG: C1100, 1200, 3300, 3310, G4010, 4050, 7000, 7020, 7030, 7050, 7200, 8000, L1200, 1300, 1400, 3100, U8110, W7000, 7020 Motorola 3 Motorola 3 All Motorola cellural phones with Micro USB socket LG 1 C LG 02 LG 2 Cellular phones LG: F2500, KE260, KE600, KE800, KE810, KE820, KE850, KE970, KE970, KG200, KG300, KG320, KG320s, KG328, KG330, KG350S, KG800, KG810, KG90, KG90c, KG920, KG970, KG98, KU250, KU580, KU800, KU950, KU970, L600V, M6100, MG800c, MG810c, MG810d, MX800, MX800 LG 2 35
Stickers SA 01 SA 02 SA 03 Acrylic sticker for XS sensors Acrylic sticker for XK, XF, XFP, XFD, XFPD sensors Acrylic sticker for XN, XNP, XND, XNPD, XNS, XNSP, XNSD, XNSPD sensors SA 04 SA 05 SA 06 Acrylic sticker for XA sensors Acrylic sticker for XF 02 and XFD 02 sensors Acrylic sticker for XR, XRP, XRD, XRPD sensors SF 01 SF 02 SF 03 Froth sticker for XS sensors Froth sticker for XK sensors Froth sticker for XN, XNP, XND, XNPD sensors SF 04 SF 05 Froth sticker for XB M1 magnetic base Froth sticker for XR, XRP, XRD, XRPD sensors 36
Others P CT 2 P EC 2, P EC 3, P EC 4, P EC 5 P MN Cable tie set 100pcs Extension cord 2, 3, 4, 5m Mini sensor to be used with sensors equipped with a security loop socket P PZ P XN P XR Loop security Magnetic holder Holder with a recoiler (without electronic protection) P YS C P YS W XG 01 Splitter with a cable Splitter without a cable Sensor to protect showcases equipped with magnetic switch. 37
Others P JT 1 P KA 2 P KK 1 Jumper for XK 04 sensor Adaptor Upper grip for XC sensors P PI 1 P PK 1 P PM 2, P PM 3,P PM 4, P PM 5 Insulating pad for XC sensors Lower grip for XC sensors Cable connecting control units P SC 1 P SK 1 P ZK 1 Sticker remover Screw for XC sensors Jumper for control units PR 01 PR 02 All sensors are available in light grey or black colours. The last character in the sensor s symbol means: G a light gray colour B a black colour Recoiler without electronic protection Recoiler for XR, XRP, XRD, XRPD sensors 38
Notes
XTRIM Sp.J. ul. Zamkowa 19 41-945 Piekary Śląskie, Poland tel. +48 32 387 01 04, fax +48 380 02 21 xtrim@xtrim.pl