1 TND6045/D Apr-2013 Importing Spice Models into OrCAD
Download.LIB File from ONSemi.com Left click. 2 TND6045/D Apr-13
Download.LIB File from ONSemi.com Left click. Left click Save. 3 TND6045/D Apr-13
Download.LIB File from ONSemi.com Left click. Can be saved anywhere. Best practice is to save in a folder with other Spice models. Left click Save. Left click Save. 4 TND6045/D Apr-13
Open.LIB File Left click Open. This will open the Model Editor if it is the default program for.lib files. If unsure what the default program is for.lib files left click Close, and follow next steps on this slide. 5 TND6045/D Apr-13
Open.LIB File Left click Open. This will open the Model Editor if it is the default program for.lib files. If unsure what the default program is for.lib files left click Close, and follow next steps on this slide. Go to Start Run. Type modeled and left click OK 6 TND6045/D Apr-13
Open.LIB File Left click Open. This will open the Model Editor if it is the default program for.lib files. Left click Open Library. If unsure what the default program is for.lib files left click Close, and follow next steps on this slide. Go to Start Run. Type modeled and left click OK 7 TND6045/D Apr-13
Open.LIB File Left click Open. This will open the Model Editor if it is the default program for.lib files. Left click Open Library. If unsure what the default program is for.lib files left click Close, and follow next steps on this slide. Go to Start Run. Type modeled and left click OK Select your file and left click Open. 8 TND6045/D Apr-13
Display Parameters Left click the model. 9 TND6045/D Apr-13
Display Parameters Left click the model. The model parameters will display. 10 TND6045/D Apr-13
Export to.olb File Go to File Export to Capture Part Library 11 TND6045/D Apr-13
Export to.olb File Go to File Export to Capture Part Library Do not change. Left click OK. 12 TND6045/D Apr-13
Export to.olb File Go to File Export to Capture Part 0 error and Library warning messages! Do not change. Left click OK. Left click OK. 13 TND6045/D Apr-13
Run OrCAD. You can do this any way you are use to. If this is your first time go to Start Run and type in capture, left click OK. Create/Open Project in OrCAD 14 TND6045/D Apr-13
Create/Open Project in OrCAD Run OrCAD. You can do this any way you are use to. If this is your first time go to Start Run and type in capture, left click OK. A screen similar to this should pop-up. 15 TND6045/D Apr-13
Create/Open Project in OrCAD Run OrCAD. You can do this any way you are use to. If this is your first time go to Start Run and type Open in capture, the left project click OK. you would like to use the model in or create a new project. A screen similar to this should pop-up. 16 TND6045/D Apr-13
Create/Open Project in OrCAD Run OrCAD. You can do this any way you are use to. If this is your first time go to Start Run and type Open in capture, the left project click OK. you would like to use the model in or create a new project. A I selected screen similar New Project. to this should Name your pop-up. project and select your save location. left click OK. 17 TND6045/D Apr-13
Create/Open Project in OrCAD Run OrCAD. You can do this any way you are use to. If this is your first time go to Start Run and type Open in capture, the left project click OK. you would like to use the model in or create a new project. Select Create a blank project and left click OK. A I selected screen similar New Project. to this should Name your pop-up. project and select your save location. left click OK. 18 TND6045/D Apr-13
Import.OLB File into OrCAD Whether you created a new project, or opened an existing, this screen should appear. 19 TND6045/D Apr-13
Import.OLB File into OrCAD Whether you created a new project, or opened an existing, this screen should appear. Go to Place Part 20 TND6045/D Apr-13
Import.OLB File into OrCAD Whether you created a new project, or opened an existing, this screen should appear. Go to Place Part This window on the right will appear. Left click Add Library. 21 TND6045/D Apr-13
Import.OLB File into OrCAD Whether you created a new project, or opened an existing, this screen should appear. Go to Place Part This window on the right will appear. Left click Add Library. Select your.olb file and left click Open Open. 22 TND6045/D Apr-13
Import.LIB File into Your Project Select your project tab. 23 TND6045/D Apr-13
Import.LIB File into Your Project Select your project tab. Right click the Library folder. 24 TND6045/D Apr-13
Import.LIB File into Your Project Select your project tab. Left click Add File. Right click the Library folder. 25 TND6045/D Apr-13
Import.LIB File into Your Project Select your project tab. Left click Add File. Right click the Library folder. Change Files of type: to All files (*.*). Select your.lib file and left click Open. 26 TND6045/D Apr-13
Import.LIB File into Your Project Select your project tab. Left click Add File. Right click the Library folder. Select Schematic Library and left click OK. Change Files of type: to All files (*.*). Select your.lib file and left click Open. 27 TND6045/D Apr-13
Import.LIB File into Your Project Select your project tab. Right click the Library folder. Left click the.lib file you just added. Left click Add File. Press Ctrl-C to copy it. Select Schematic Library and left click OK. Change Files of type: to All files (*.*). Select your.lib file and left click Open. 28 TND6045/D Apr-13
Import.LIB File into Your Project Left click the.lib file you just Select your added. Left click Add File. project tab. Press Ctrl-C to copy it. Right click the Library folder. Left click the Model Libraries folder. Press Ctrl-V to paste. Change Files of type: to All files (*.*). Select Schematic Library and left click OK. Select your.lib file and left click Open. 29 TND6045/D Apr-13
Import.LIB File into Your Project Left click the.lib file you just Select your Left The click.lib Add file added. File. should be in both project tab. Press Ctrl-C to the Library and copy it. Right click the Model Libraries Library folder. folders. Left click the Model Libraries folder. Press Ctrl-V to paste. Very Important! You will have to add the.lib file for this model to every project Change you plan Files on of using type: it in. to All files (*.*). Select Schematic Library and left click OK. Select your.lib file and left click Open. 30 TND6045/D Apr-13