SCHOOL OF SKILLED TRADES, TECHNOLOGY (START) 2014-2015 APPRENTICESHIP
INDEX WELCOME STUDENTS: WELCOME FROM DEAN... 2 WELCOME FROM VICE PRESIDENT, ACADEMIC... 3 PROGRAM SPECIFIC INFORMATION: CONTACT INFORMATION FOR DEAN, ASSOCIATE DEAN, OFFICE STAFF, PROGRAM COORDINATOR... 4 PROGRAM INFORMATION PROGRAM DESCRIPTION... PROGRAM LEARNING OUTCOMES... PROGRAM OF STUDIES... 5-18 PROGRAM SPECIFIC ACADEMIC POLICIES... 19 APPRENTICESHIP CALCULATION OF GPA... 20-21 ADDITIONAL IMPORTANT INFORMATION: ACADEMIC ADVISING STUDENT ADVISOR... 22 ACADEMIC INTEGRITY... 22 AEGROTAT... 22 CENTRE FOR STUDENTS WITH DISABILITIES... 23 CONTINUING EDUCATION... 23 COURSE OUTLINES... 23 CREDIT TRANSFER INFORMATION... 23 DURHAM COLLEGE VISION AND VALUES... 24 ESSENTIAL EMPLOYABILITY SKILLS... 24 GENERAL EDUCATION... 24 IMPORTANT DATES... 24 LEARNING MANAGEMENT SYSTEM USAGE... 24 LIBRARY... 25 MISSED FINAL EXAMINATIONS... 25 PATHWAYS TO DEGREES... 25 PRIOR LEARNING ASSESSMENT AND RECOGNITION (PLAR)... 25 REQUIREMENTS FOR PROMOTION... 26 SCHOLARSHIPS, BURSARIES AND AWARDS... 26 STUDENT ACADEMIC LEARNING SERVICES (SALS)... 26 STUDENT COMMUNICATIONS... 26 STUDENT RIGHTS AND RESPONSIBILITIES... 27 Please note the following important information: Durham College strives to ensure the accuracy of the information in this publication. Please note that the academic curriculum is continually reviewed and revised to ensure program quality and relevancy. As such, the college reserves the right to modify or cancel any course, program, fee, procedure, timetable or campus location at any time. Please consult our website at http://www.durhamcollege.ca for the most current information. June 2014 Page 0 of 27
Welcome Students - A Message from the Dean Welcome to Durham College s School of Skilled Trades, Apprenticeship, Renewable Technology and Centre for Food at Whitby. You have chosen wisely to attend Durham College, faculty and staff are committed to helping you successfully achieve your goals. To do this, our faculty, who are dedicated professionals chosen from your field of study, have developed relevant programs of study and look forward to sharing their experience with you to help you achieve success in your program. The course of study you have chosen will provide you with a mix of both theoretical and hands-on activities that are appropriate to your career field. Our classroom and shop facilities are well equipped and designed to support your learning experience. Your time at Durham College is an opportunity for concentrated study to prepare for your career. Please use your time here to your best advantage. Durham College takes pride in our mission to provide a progressive and motivating learning environment to produce exceptional graduates who meet industry expectations. If at any time you require help please feel free to approach our faculty and staff for assistance. Your success matters to us! Welcome Darrin Caron Dean, School of Skilled Trades, Apprenticeship & Renewable Technology Page 1 of 27
Welcome Students - A Message from the Vice President, Academic Congratulations on choosing Durham College and taking a very important step in preparing for your future. Durham College is known for high quality programs, leading edge technology, an award winning library and a student-centered approach to learning. Supporting our mission that the student experience comes first, Durham College is committed to providing students with quality learning experiences and support in finding fulfillment in education, employment and lifelong learning. Our programs are continually shaped by market needs and delivered by exceptional teachers with real-world experience. The program you have chosen has been designed to help you develop the necessary skills and knowledge to support your success in your chosen career path. Our dedicated and professional staff and professors are committed to helping you achieve your educational goals and your career aspirations. Durham College strives to be accountable to students and employers through the preparation of work-ready graduates who will continue to live our success matters focus in their professional work environment. We are pleased you have chosen to study at Durham College and we look forward to supporting your learning journey work hard, have fun, enjoy your college experience and campus life. I wish you much success with your studies. Judy Robinson, Vice President, Academic Page 2 of 27
School of Skilled Trades, Apprenticeship & Renewable Technology Whitby Faculty & Staff Individuals may be contacted by dialing directly (905) 721-2000, followed by the appropriate extension. Administration Title Phone E-mail Address Darrin Caron Dean/Principal 3302 darrin.caron@durhamcollege.ca Pam Stoneham Associate Dean 4232 pam.stoneham@durhamcollege.ca Julie Hauber Administrative Assistant 3344 julie.hauber@durhamcollege.ca Sue Moore Manager Academic Operations 4040 sue.moore@durhamcollege.ca Mary Pearce Administrative Coordinator 4025 mary.pearce@durhamcollege.ca Shelley Chard Student Advisor 4087 shelley.chard@durhamcollege.ca Program Coordinators Kevin Keays Construction & Hoisting Techniques 3324 kevin.keays@durhamcollege.ca Don Fishley Construction Carpentry-Sustainable 4202 don.fishley@durhamcollege.ca Dave Dewar Electrical Techniques 4199 dave.dewar@durhamcollege.ca Electrical Technician-Instrumentation & Control Dave Watkins Gas Technician 4175 david.watkins@durhamcollege.ca HVAC John Platnar Mechanical Techniques-Plumbing 4197 john.platnar@durhamcollege.ca Clair Cornish Mechanical Technician-Mechanical 3328 clair.cornish@durhamcollege.ca Maintenance & Controls Trades Fundamentals Ralph Ruffo Motive Power Technician-Service & 4155 ralph.ruffo@durhamcollege.ca Management David Beals Power Engineering Technician 4167 david.beals@durhamcollege.ca Mike McKenney Renewable Energy Technician 4178 mike.mckenney@durhamcollege.ca Gregg Peel Welding Techniques 4200 gregg.peel@durhamcollege.ca Page 3 of 27
PROGRAM OF STUDY 2014/2015 SCHOOL OF SKILLED TRADES, 14-Jul-14 -WEEKLY BREAKDOWN- TECHNOLOGY AUTOMOTIVE SERVICE TECHNICIAN - APPRENTICESHIP ALT. FIELD LECT LAB DEL. PLMT COURSE NAME MOD CODE PREREQUISITE COREQUISITES. HR HR.HRS SEMESTER 1 AUTO WORK PRACTICES L1 AUTO 1410 4 0 0 AUTO ENGINE SYSTEMS L1 AUTO 1411 5 0 0 AUTO DRIVE TRAIN SYSTEMS L1 AUTO 1412 4 0 0 AUTO BRAKES/STEERING/SUSPENSION L1 AUTO 1413 5 0 0 AUTO ELECTRICAL/FUEL/EMISSIONS L1 AUTO 1414 12 0 0 SEMESTER 2 AUTO AIR CONDITIONG SYSTEMS L2 AUTO 2400 4 0 0 AUTO ENGINES SYSTEMS L2 AUTO 2401 5 0 0 AUTO DRIVE TRAIN SYSTEMS L2 AUTO 2402 4 0 0 AUTO BRAKES/STEERING/SUSPENSION L2 AUTO 2403 5 0 0 AUTO ELECTRICAL/FUEL/EMISSIONS L2 AUTO 2404 12 0 0 SEMESTER 3 AUTO ELECTRONIC CLIMATE CONTROL SYSTEMS L3 AUTO 3400 4 0 0 AUTO ENGINE SYSTEMS L3 AUTO 3401 5 0 0 AUTO DRIVE TRAIN SYSTEMS L3 AUTO 3402 4 0 0 AUTO BRAKES/STEERING/SYSPENSION L3 AUTO 3403 5 0 0 AUTO ELECTRICAL/FUEL/EMISSIONS L3 AUTO 3404 12 0 0 NOTES: ELE - ELECTIVE - Students may take one or many subjects, depending on the requirements of their program. ELET - represents a typical subject load and IS included in the total hours per week, to reflect the total hours per week required. OPT1/OPT2/OPT3 - OPTIONS - Students choose subjects. OPT1 subjects are included in total hours per week. G - GENERAL EDUCATION - Subjects marked at the left margin with G are "General Education" subjects. Page 4 of 27
PROGRAM OF STUDY 2014/2015 SCHOOL OF SKILLED TRADES, 14-Jul-14 -WEEKLY BREAKDOWN- TECHNOLOGY CHILD DEVELOPMENT PRACTITIONER APPRENTICESHIP ALT. FIELD LECT LAB DEL. PLMT COURSE NAME MOD CODE PREREQUISITE COREQUISITES. HR HR.HRS SEMESTER 1 ADVOCACY & BIAS FREE PRACTICE CDP 1400 3 0 0 CHILD DEVELOPMENT 1 CDP 1401 3 0 0 CHILD DEVELOPMENT 2 CDP 1402 CDP 1401 3 0 0 CREATIVE ARTS CDP 1403 3 0 0 HEALTH SAFETY & NUTRITION CDP 1404 3 0 0 PRESCHOOL LEARNING ENVIRONMENT 1 CDP 1405 CDP 1406 3 0 0 PRESCHOOL LEARNING ENVIRONMENT 1 - PLACEMENT CDP 1406 CDP 1405 0 0 0 3 PRESCHOOL LEARNING ENVIRONMENT 2 CDP 1407 CDP 1401 CDP 1405 CDP 1408 3 0 0 PRESCHOOL LEARNING ENVIRONMENT 2 - PLACEMENT CDP 1408 CDP 1407 0 0 0 6 SCHOOL AGE LEARNING ENVIRONMENT CDP 1409 CDP 1410 3 0 0 SCHOOL AGE LEARNING ENVIRONMENT - PLACEMENT CDP 1410 CDP 1409 0 0 0 3 24 0 0 12 NOTES: ELE - ELECTIVE - Students may take one or many subjects, depending on the requirements of their program. ELET - represents a typical subject load and IS included in the total hours per week, to reflect the total hours per week required. OPT1/OPT2/OPT3 - OPTIONS - Students choose subjects. OPT1 subjects are included in total hours per week. G - GENERAL EDUCATION - Subjects marked at the left margin with G are "General Education" subjects. Page 5 of 27
PROGRAM OF STUDY 2014/2015 SCHOOL OF SKILLED TRADES, 14-Jul-14 -WEEKLY BREAKDOWN- TECHNOLOGY ELECTRICIAN - APPRENTICESHIP ALT. FIELD LECT LAB DEL. PLMT COURSE NAME MOD CODE PREREQUISITE COREQUISITES. HR HR.HRS SEMESTER 1 ELECTRICAL THEORY L1 ELEC 1405 8 0 0 ELECTRONICS L1 ELEC 1408 3 2 0 ELECTRICAL CODE L1 ELEC 1409 4 0 0 ELECTRICAL PRINTS L1 ELEC 1410 4 0 0 ELECTRICAL INSTALLATION METHODS L1 ELEC 1411 0 6 0 ELECTRICAL INSTRUMENTATION L1 ELEC 1412 1 2 0 20 10 0 SEMESTER 2 ELECTRICAL THEORY L2 ELEC 2400 LEVEL 1 8 0 0 ELECTRONICS L2 ELEC 2403 2 2 0 ELECTRICAL CODE L2 ELEC 2404 4 0 0 ELECTRICAL PRINTS L2 ELEC 2405 3 0 0 ELECTRICAL INSTRUMENTATION L2 ELEC 2408 2 2 0 ELECTRICAL INSTALLATION METHODS L2 ELEC 2409 0 4 0 ELECTRICAL MONITORING & COMMUNICATION SYS ELEC 2410 3 0 0 22 8 0 NOTES: ELE - ELECTIVE - Students may take one or many subjects, depending on the requirements of their program. ELET - represents a typical subject load and IS included in the total hours per week, to reflect the total hours per week required. OPT1/OPT2/OPT3 - OPTIONS - Students choose subjects. OPT1 subjects are included in total hours per week. G - GENERAL EDUCATION - Subjects marked at the left margin with G are "General Education" subjects. Page 6 of 27
PROGRAM OF STUDY 2014/2015 SCHOOL OF SKILLED TRADES, 14-Jul-14 -WEEKLY BREAKDOWN- TECHNOLOGY ELECTRICIAN CONSTRUCTION & MAINTENANCE - APPRENTICESHIP ALT. FIELD LECT LAB DEL. PLMT COURSE NAME MOD CODE PREREQUISITE COREQUISITES. HR HR.HRS SEMESTER 3 ELECTRICAL TRADE THEORY L3 ELEC 3401 LEVEL 2 6 0 0 ELECTRONICS L3 ELEC 3403 2 4 0 ELECTRICAL CODE L3 ELEC 3405 3 0 0 ELECTRICAL PRINTS L3 ELEC 3406 3 0 0 ELECTRICAL INSTRUMENTATION L3 ELEC 3409 1 3 0 ELECTRICAL INSTALLATION METHODS L3 ELEC 3412 0 8 0 15 15 0 NOTES: ELE - ELECTIVE - Students may take one or many subjects, depending on the requirements of their program. ELET - represents a typical subject load and IS included in the total hours per week, to reflect the total hours per week required. OPT1/OPT2/OPT3 - OPTIONS - Students choose subjects. OPT1 subjects are included in total hours per week. G - GENERAL EDUCATION - Subjects marked at the left margin with G are "General Education" subjects. Page 7 of 27
PROGRAM OF STUDY 2014/2015 SCHOOL OF SKILLED TRADES, 14-Jul-14 -WEEKLY BREAKDOWN- TECHNOLOGY ELECTRICIAN INDUSTRIAL - APPRENTICESHIP ALT. FIELD LECT LAB DEL. PLMT COURSE NAME MOD CODE PREREQUISITE COREQUISITES. HR HR.HRS SEMESTER 3 ELECTRICAL TRADE THEORY L3 ELEC 3401 6 0 0 ELECTRONICS L3 ELEC 3403 2 4 0 ELECTRICAL CODE L3 ELEC 3405 3 0 0 ELECTRICAL INSTRUMENTATION L3 ELEC 3409 1 3 0 ELECTRICAL INSTALLATION METHODS L3 ELEC 3412 0 8 0 ELEC IND MECHANICS L3 ELEC 4406 0 3 0 12 18 0 NOTES: ELE - ELECTIVE - Students may take one or many subjects, depending on the requirements of their program. ELET - represents a typical subject load and IS included in the total hours per week, to reflect the total hours per week required. OPT1/OPT2/OPT3 - OPTIONS - Students choose subjects. OPT1 subjects are included in total hours per week. G - GENERAL EDUCATION - Subjects marked at the left margin with G are "General Education" subjects. Page 8 of 27
PROGRAM OF STUDY 2014/2015 SCHOOL OF SKILLED TRADES, 14-Jul-14 -WEEKLY BREAKDOWN- TECHNOLOGY ELEVATING DEVICES MECHANIC - APPRENTICESHIP ALT. FIELD LECT LAB DEL. PLMT COURSE NAME MOD CODE PREREQUISITE COREQUISITES. HR HR.HRS SEMESTER 1 EDM BASIC ELECTRICITY EDM 1400 8 0 0 EDM BASIC HYDRAULICS EDM 1401 2 0 0 EDM INTRO TO ELEVATING DEVICES EDM 1403 2 0 0 EDM LADDER/SCAFFOLDING/WORK PLATFORMS EDM 1404 1 0 0 EDM MECHANICAL PRACTICES EDM 1405 4 0 0 EDM MECHANICAL PRINT READING EDM 1406 2 0 0 EDM RIGGING & HOISTING EDM 1407 2 0 0 EDM SAFETY EDM 1408 2 0 0 EDM ELEVATOR HYDRAULICS SYSTEMS EDM 1412 4 0 0 EDM HYDRAULICS ELEVATOR INSTALLATION EDM 1413 2 0 0 EDM INTRODUCTION TO B.44 CODE EDM 1414 1 0 0 SEMESTER 2 EDM INDUSTRIAL ELECTRICITY EDM 2402 7 0 0 EDM INSTALLATION - TRACTION ELEVATORS EDM 2404 10 0 0 EDM INSTALLATION - ESCALATORS & MOVING WALKS EDM 2405 2 0 0 EDM LIFTS FOR PERSON WITH PHYSICAL DISABILITIES EDM 2406 2 0 0 EDM ELEVATOR MODERNIZATIONA/ALTERATIONS EDM 2407 2 0 0 EDM MOTORS, GENERATORS, CONTROLS & A/C DRIVES EDM 2408 7 0 0 Page 9 of 27
PROGRAM OF STUDY 2014/2015 SCHOOL OF SKILLED TRADES, 14-Jul-14 -WEEKLY BREAKDOWN- TECHNOLOGY ELEVATING DEVICES MECHANIC - APPRENTICESHIP ALT. FIELD LECT LAB DEL. PLMT COURSE NAME MOD CODE PREREQUISITE COREQUISITES. HR HR.HRS SEMESTER 3 EDM CSA - REGULATIONS EDM 3400 2 0 0 EDM SOLID STATE ELECTRONICS EDM 3401 9 0 0 EDM MAINTENANCE - PREVENTATIVE EDM 3405 2 0 0 EDM MAINTENANCE - ELEVATOR CAR EQUIPMENT EDM 3406 1 0 0 EDM MAINTENANCE - ELEVATOR HOISTWAY EDM 3407 2 0 0 EQUIPMENT EDM MAINTENANCE - MACHINE ROOM EQUIPMENT EDM 3408 5 0 0 EDM MAINTENANCE - ESCALATOR & MOVING WALK EDM 3409 1 0 0 EDM CIRCUIT TRACING EDM 3410 8 0 0 NOTES: ELE - ELECTIVE - Students may take one or many subjects, depending on the requirements of their program. ELET - represents a typical subject load and IS included in the total hours per week, to reflect the total hours per week required. OPT1/OPT2/OPT3 - OPTIONS - Students choose subjects. OPT1 subjects are included in total hours per week. G - GENERAL EDUCATION - Subjects marked at the left margin with G are "General Education" subjects. Page 10 of 27
PROGRAM OF STUDY 2014/2015 SCHOOL OF SKILLED TRADES, 14-Jul-14 -WEEKLY BREAKDOWN- TECHNOLOGY GENERAL MACHINIST - APPRENTICESHIP ALT. FIELD LECT LAB DEL. PLMT COURSE NAME MOD CODE PREREQUISITE COREQUISITES. HR HR.HRS SEMESTER 1 COMMON CORE PRACTICAL MACH 1401 12 0 0 COMMON CORE TRADE THEORY MACH 1402 5 0 0 COMMON CORE METROLOGY MACH 1403 2 0 0 COMMON CORE TRADE CALCULATIONS MACH 1404 5 0 0 COMMON CORE BLUEPRINT READING MACH 1405 4 0 0 COMMON CORE METALLURGY MACH 1406 2 0 0 SEMESTER 2 MACHINIST PRACTICAL INT MACH 2400 12 0 0 MACHINIST TRADE THEORY INT MACH 2401 6 0 0 MACHINIST COMPUTER NUMERIC CONTROLS INT MACH 2402 4 0 0 MACHINIST CALULCATIONS INT MACH 2403 4 0 0 MACHINIST PRINT READING INT MACH 2404 4 0 0 SEMESTER 3 MACHINIST PRACTICAL ADV MACH 3400 12 0 0 MACHINIST TRADE THEORY ADV MACH 3401 4 0 0 MACHINIST COMPUTER NUMERIC CONTROLS ADV MACH 3402 5 0 0 MACHINIST CALULCATIONS ADV MACH 3403 4 0 0 MACHINIST PRINT READING ADV MACH 3404 5 0 0 NOTES: ELE - ELECTIVE - Students may take one or many subjects, depending on the requirements of their program. ELET - represents a typical subject load and IS included in the total hours per week, to reflect the total hours per week required. OPT1/OPT2/OPT3 - OPTIONS - Students choose subjects. OPT1 subjects are included in total hours per week. G - GENERAL EDUCATION - Subjects marked at the left margin with G are "General Education" subjects. Page 11 of 27
PROGRAM OF STUDY 2014/2015 SCHOOL OF SKILLED TRADES, 14-Jul-14 -WEEKLY BREAKDOWN- TECHNOLOGY INDUSTRIAL MECHANIC MILLWRIGHT - APPRENTICESHIP ALT. FIELD LECT LAB DEL. PLMT COURSE NAME MOD CODE PREREQUISITE COREQUISITES. HR HR.HRS SEMESTER 1 IMM DRAWINGS & SCHEMATICS L1 IMM 1415 4 0 0 IMM ELECTRICAL & ELECTRONIC CONTROLS L1 IMM 1416 2 0 0 IMM MACHINE TECHNOLOGY L1 IMM 1417 3 0 0 IMM RIGGING & HOISTING IMM 1418 2 0 0 IMM TRADE PRACTICAL L1 IMM 1419 9 0 0 IMM WELDING & FABRICATION L1 IMM 1420 4 0 0 IMM WORKSHOP PRACTICE L1 IMM 1421 4 0 0 IMM WORKSHOP TECHNOLOGY IMM 1422 2 0 0 SEMESTER 2 IMM POWER TRANSMISSION IMM 2407 5 0 0 IMM DRAWINGS & SCHEMATICS L2 IMM 2415 2 0 0 IMM ELECTRICAL & ELECTRONIC CONTROLS L2 IMM 2416 2 0 0 IMM MACHINE TECHNOLOGY L2 IMM 2417 4 0 0 IMM TRADE PRACTICAL L2 IMM 2419 9 0 0 IMM WELDING & FABRICATION L2 IMM 2420 4 0 0 IMM WORKSHOP PRACTICE L2 IMM 2421 4 0 0 SEMESTER 3 IMM HYDRAULICS IMM 3407 7 0 0 IMM PNEUMATICS IMM 3408 3 0 0 IMM ELECTRICAL & ELECTRONIC CONTROLS L3 IMM 3416 3 0 0 IMM MACHINE TECHNOLOGY L3 IMM 3417 5 0 0 IMM TRADE PRACTICAL L3 IMM 3419 6 0 0 IMM WELDING & FABRICATION L3 IMM 3420 4 0 0 IMM WORKSHOP PRACTICE L3 IMM 3421 2 0 0 NOTES: ELE - ELECTIVE - Students may take one or many subjects, depending on the requirements of their program. ELET - represents a typical subject load and IS included in the total hours per week, to reflect the total hours per week required. OPT1/OPT2/OPT3 - OPTIONS - Students choose subjects. OPT1 subjects are included in total hours per week. G - GENERAL EDUCATION - Subjects marked at the left margin with G are "General Education" subjects. Page 12 of 27
PROGRAM OF STUDY 2014/2015 SCHOOL OF SKILLED TRADES, 14-Jul-14 -WEEKLY BREAKDOWN- TECHNOLOGY MOBILE & TOWER CRANE OPERATOR - APPRENTICESHIP ALT. FIELD LECT LAB DEL. PLMT COURSE NAME MOD CODE PREREQUISITE COREQUISITES. HR HR.HRS SEMESTER 1 MTCO SAFETY MTCO 1400 3 0 0 MTCO TYPES & TERMINOLOGY MTCO 1401 1 0 0 MTCO SYSTEMS & COMPONENTS MTCO 1402 4 0 0 MTCO WIRE ROPE & RIGGINGS MTCO 1403 4 0 0 MTCO LIFT PLANNING MTCO 1404 9 0 0 MTCO CRANE APPLICATIONS MTCO 1405 14 0 0 MTCO TRANSPORTING A CRANE MTCO 1406 3 0 0 MTCO CRANE MAINTENANCE MTCO 1407 2 0 0 40 0 0 NOTES: ELE - ELECTIVE - Students may take one or many subjects, depending on the requirements of their program. ELET - represents a typical subject load and IS included in the total hours per week, to reflect the total hours per week required. OPT1/OPT2/OPT3 - OPTIONS - Students choose subjects. OPT1 subjects are included in total hours per week. G - GENERAL EDUCATION - Subjects marked at the left margin with G are "General Education" subjects. Page 13 of 27
PROGRAM OF STUDY 2014/2015 SCHOOL OF SKILLED TRADES, 14-Jul-14 -WEEKLY BREAKDOWN- TECHNOLOGY MOBILE CRANE OPERATOR BRANCH 1 339A, ADVANCED- ALT. FIELD LECT LAB DEL. PLMT COURSE NAME MOD CODE PREREQUISITE COREQUISITES. HR HR.HRS SEMESTER 1 MCO LIFT PLANNING-HYDRAULIC CRANES 1 MCO 2400 2 0 0 MCO HYDRAULIC CRANE OPERATIONS 1 MCO 2401 4 0 0 MCO LIFT PLANNING/CONVENTIONAL CRANES 1 MCO 2402 2 0 0 MCO CONVENTIONAL CRANE OPERATIONS 1 MCO 2403 4 0 0 MCO LIFT PLANNING & HYDRAULIC CRANES 2 MCO 3401 1 0 0 MCO HYDRAULIC CRANE OPERATIONS 2 MCO 3402 6 0 0 MCO LIFT PLANNING - CONVENTIONAL CRANES 2 MCO 3403 1 0 0 MCO CONVENTIONAL CRANE OPERATIONS 2 MCO 3404 6 0 0 MCO SPECIALIZED HOISTING OPERATIONS MCO 4400 14 0 0 40 0 0 NOTES: ELE - ELECTIVE - Students may take one or many subjects, depending on the requirements of their program. ELET - represents a typical subject load and IS included in the total hours per week, to reflect the total hours per week required. OPT1/OPT2/OPT3 - OPTIONS - Students choose subjects. OPT1 subjects are included in total hours per week. G - GENERAL EDUCATION - Subjects marked at the left margin with G are "General Education" subjects. Page 14 of 27
PROGRAM OF STUDY 2014/2015 SCHOOL OF SKILLED TRADES, 14-Jul-14 -WEEKLY BREAKDOWN- TECHNOLOGY PLUMBER - APPRENTICESHIP ALT. FIELD LECT LAB DEL. PLMT COURSE NAME MOD CODE PREREQUISITE COREQUISITES. HR HR.HRS SEMESTER 1 PLMB PLUMBING SYSTEMS L1 PLMB 1416 11.25 0 0 PLMB TOOLS & PIPING METHODS L1 PLMB 1417 6 0 0 PLMB TRADE CALCULATIONS L1 PLMB 1418 3 0 0 PLMB TRADE DOCUMENTATION L1 PLMB 1419 3 0 0 PLMB WELDING L1 PLMB 1420 3 0 0 PLMB WORKPLACE SAFETY,RIGGING & HOISTING L1 PLMB 1421 3.75 0 0 SEMESTER 2 PLMB DWV PIPING SYSTEMS L2 PLMB 2415 6 0 0 PLMB PLUMBING SYSTEMS L2 PLMB 2416 15 0 0 PLMB TRADE CALCULATIONS L2 PLMB 2418 3 0 0 PLMB TRADE DOCUMENTATION L2 PLMB 2419 3 0 0 PLMB WELDING L2 PLMB 2420 3 0 0 SEMESTER 3 PLMB PLUMBING SYSTEMS L3 PLMB 3416 18 0 0 PLMB PROCESS PIPING SYSTEMS L3 PLMB 3417 6 0 0 PLMB TRADE DOCUMENTATION L3 PLMB 3419 6 0 0 NOTES: ELE - ELECTIVE - Students may take one or many subjects, depending on the requirements of their program. ELET - represents a typical subject load and IS included in the total hours per week, to reflect the total hours per week required. OPT1/OPT2/OPT3 - OPTIONS - Students choose subjects. OPT1 subjects are included in total hours per week. G - GENERAL EDUCATION - Subjects marked at the left margin with G are "General Education" subjects. Page 15 of 27
PROGRAM OF STUDY 2014/2015 SCHOOL OF SKILLED TRADES, 14-Jul-14 -WEEKLY BREAKDOWN- TECHNOLOGY TOOL & DIE - APPRENTICESHIP ALT. FIELD LECT LAB DEL. PLMT COURSE NAME MOD CODE PREREQUISITE COREQUISITES. HR HR.HRS SEMESTER 1 COMMON CORE PRACTICAL MACH 1401 12 0 0 COMMON CORE TRADE THEORY MACH 1402 5 0 0 COMMON CORE METROLOGY MACH 1403 2 0 0 COMMON CORE TRADE CALCULATIONS MACH 1404 5 0 0 COMMON CORE BLUEPRINT READING MACH 1405 4 0 0 COMMON CORE METALLURGY MACH 1406 2 0 0 SEMESTER 2 T&D THEORY INTERMEDIATE TD 2400 7 0 0 T&D PRACTICAL INTERMEDIATE TD 2401 12 0 0 T&D BLUEPRINT READING INTERMEDIATE TD 2402 4 0 0 T&D CALCULATIONS INTERMDIATE TD 2403 4 0 0 T&D CNC INTERMDIATE TD 2404 3 0 0 SEMESTER 3 T&D THEORY ADV TD 3400 7 0 0 T&D PRACTICAL ADV TD 3401 12 0 0 T&D BLUEPRINT READING ADV TD 3402 4 0 0 T&D CNC ADVANCED TD 3403 3 0 0 T&D CALCULATIONS ADV TD 3404 4 0 0 NOTES: ELE - ELECTIVE - Students may take one or many subjects, depending on the requirements of their program. ELET - represents a typical subject load and IS included in the total hours per week, to reflect the total hours per week required. OPT1/OPT2/OPT3 - OPTIONS - Students choose subjects. OPT1 subjects are included in total hours per week. G - GENERAL EDUCATION - Subjects marked at the left margin with G are "General Education" subjects. Page 16 of 27
PROGRAM OF STUDY 2014/2015 SCHOOL OF SKILLED TRADES, 14-Jul-14 -WEEKLY BREAKDOWN- TECHNOLOGY WELDER - APPRENTICESHIP ALT. FIELD LECT LAB DEL. PLMT COURSE NAME MOD CODE PREREQUISITE COREQUISITES. HR HR.HRS SEMESTER 1 WELD APPLIED BLUEPRINT READING WELD 1410 7 0 0 WELD MATERIALS & PROCESS QUALITY 1 WELD 1411 3 0 0 WELD GAS SHIELDED SEMI-AUTO PRAC 1 WELD 1412 7 0 0 WELD SHIELDED METAL ARC PRAC 1 WELD 1413 9 0 0 WELD THERMAL CUTTING WELD 1414 3 0 0 WELD TRADE PRACTICES WELD 1415 4 0 0 WELD THEORY 1 WELD 1416 5 0 0 SEMESTER 2 38 0 0 WELD BLUEPRINT READING/FITTING WELD 2403 7 0 0 WELD GAS TUNGSTEN ARC (GTAW) 1 WELD 2404 5 0 0 WELD SEMI-AUTO WELDING PRAC 2 WELD 2405 6 0 0 WELD SHIELDED METAL ARC PRAC 2 WELD 2406 9 0 0 WELD THEORY 2 WELD 2407 3 0 0 SEMESTER 3 WELD LAYOUT & FITTING WELD 3412 11 0 0 WELD QUALITY PROCESSES WELD 3413 5 0 0 WELD GAS TUNGSTEN ARC (GTAW) 2 WELD 3414 5 0 0 WELD AUTOMATED PROCESSES WELD 3415 3 0 0 WELD SHIELDED METAL ARC PRAC 3 WELD 3416 6 0 0 NOTES: ELE - ELECTIVE - Students may take one or many subjects, depending on the requirements of their program. ELET - represents a typical subject load and IS included in the total hours per week, to reflect the total hours per week required. OPT1/OPT2/OPT3 - OPTIONS - Students choose subjects. OPT1 subjects are included in total hours per week. G - GENERAL EDUCATION - Subjects marked at the left margin with G are "General Education" subjects. Page 17 of 27
Program Specific Academic Policies STUDENT CONDUCT: Students are expected to conduct themselves in a professional manner while on campus and off campus. Students are expected to comply with the program s professional conduct, appearance, and safety expectations found in this Program Guide and to understand and comply with offsite policies and procedures. It is everyone's responsibility to have respect for their peers. CELL PHONES/PAGERS: Electronic communication devices will be turned off and not used in the classroom unless part of the objectives or learning activities of a course or lesson. Students who disrupt a class to the detriment of the other members of the class will be asked to leave. MISSED TESTS: The opportunity to write a missed test is discretionary and may be granted based on meeting the following criteria: notifying the professor prior to the scheduled test time; submitting appropriate documentation (e.g. note from doctor, dentist etc.) to validate the absence to the subject professor, and meeting with the professor. ATTENDANCE: Students are expected to attend all lecture and practical sessions for this course. Students who have missed three or more days will be subject to an unsuccessful report with the ministry and will be required to repeat the level. PERSONAL PROTECTIVE EQUIPMENT: Students must wear PPE in the shop environment and follow safety guidelines. Failure to do so will result in the student being asked to leave and negate their opportunity to complete projects/assessments. NOTE: Pass/Fail criteria, 70% minimum pass per subject, one subject allowed between 60% & 69%, must have GPA of 3.0. Plumbing program 70% in Plumbing Systems Page 18 of 27
Apprenticeship - Calculation of GPA Grade Percentage Grade Range Points Description A+ 90-100 5.0 Outstanding A 85-89 4.5 Exemplary A- 80-84 4.0 Excellent B+ 75-79 3.5 Very Good B 70-74 3.0 Good C+ 65-69 2.5 Conditional Pass C 60-64 2.0 Conditional Pass F Below 60 0.0 Fail Note: Progress to the next apprenticeship level requires a GPA of 3.0 with; one subject only with a grade of C or C+ (60-69%). Plumbing Systems is a mandatory 70% or higher. The Grade Point Average is determined by multiplying the subject credit hours by the numeric equivalent obtained, and dividing the result by the total subject weights for the semester/level. The credit hours are found on your course outline. Example Subject Subject Credit (Weight) (# of Hours) Grade Numerical Equiv (Grade Points) Quality Points Weld Blueprint 7 78 3.5 24 Weld Gas 5 70 3.0 15 Tungsten Arc Weld Theory 5 70 3.0 15 Weld Thermal 3 90 5.0 15 Cutting Weld Trade 4 65 2.5 10 Practices Weld Semi-Auto 6 75 3.5 21 Practice TOTAL 30 100 Page 19 of 27
Calculation of GPA is as follows: Subject credits x numerical equivalent Total subject credits in the semester or level 100 Quality points = 3.33 GPA 30 Credit Hours Note: The higher the Subject Credit Weight (number of hours per week) can affect your GPA. For example, a subject with a high weighting and a low grade may decrease your GPA significantly, alternatively a subject with a high weighting and a high grade may increase your GPA significantly. Pass/Fail Criteria Note that in order to progress into the next level or graduate you must attain: Minimum 70% pass in each subject One subject only (per level) is permitted to be between 60 to 69 per cent. Some subjects are at a mandatory 70%, check your course outline. AND Level (term) GPA of 3.0. Page 20 of 27
Academic Advising - Student Advisors Each school provides a student advisor(s) to help you reach your full academic potential. These representatives can assist you with: accessing other college services; developing academic plans to promote success in the event of failed subjects or a low GPA; finding equivalent credits; identifying career goals and making sound academic decisions; making decisions regarding full- and part-time studies; reviewing graduation requirements; selecting electives and options; setting up academic plans; or transferring to another program. To view contact information for your Student Advisor, please visit: http://www.durhamcollege.ca/student-experience/helping-you-succeed/academicsupport-resources/academic-advising Academic Integrity Academic integrity refers to the pursuit of scholarly activity in an open, honest and responsible manner. Acts that undermine academic integrity, such as plagiarism, cheating and misrepresentation of work, contradict Durham College s core values. To ensure the highest academic standards, students are accountable for the work they produce, and student work must be the product of his or her efforts. Durham College has purchased a license with Turnitin.com, an online service to detect unoriginal work and citation errors. The Academic Integrity Policy and Procedure documents (http://www.durhamcollege.ca/academicpolicies) provide a comprehensive explanation of Durham College s expectations regarding academic integrity. Aegrotat Aegrotat refers to a compassionate pass in a course in which, due to emergency circumstances related to health and wellness, a student was unable to complete all of the evaluation requirements. Emergency circumstances that may warrant the designation of an Aegrotat include, but are not limited to: injury, illness and/or bereavement. Documentation supporting the request for an Aegrotat designation may be required. The awarding of an Aegrotat credit is noted in a student s transcript as AEG and is therefore not included in the calculation of a student s grade point average. A student shall receive Aegrotat standing only once in a five year period. Further information about Aegrotat standing can be found in the Aegrotat Policy and Procedure documents, please visit the following link: http://www.durhamcollege.ca/academicpolicies Page 21 of 27
Centre for Students with Disabilities The Centre for Students with Disabilities (CSD) at Durham College provides services to students with disabilities to ensure that equal access is available to all aspects of the academic environment. These services are designed in accordance with the Ontario Human Rights Code and the Accessibility for Ontarians with Disabilities Act. Our services are confidential. Please visit the following link to view valuable information regarding the CSD: http://durhamcollege.ca/student-experience/helping-you-succeed/centre-forstudents-with-disabilities Continuing Education Course Book If you are unable to access a day-time course (timetable conflicts, wish to repeat a course, etc.) or want to get a head start on your next semester, discuss your options with your Student Advisor. To view comprehensive information regarding Continuing Education offerings, please visit the following link: http://www.durhamcollege.ca/academic-schools/school-of-continuing-education Course Outlines For each course, a Course Outline that describes course learning outcomes, course content, learning activities, evaluation methods, timelines and support resources is available online. Please note that students are expected to download copies of their course outlines from MyCampus prior to the first class in each course. Instructions for downloading are located on MyCampus at: http://www.durhamcollege.ca/mycampus Please visit the following link to view the Course Outlines Policy and Procedure documents: http://www.durhamcollege.ca/academicpolicies Credit Transfer Information Durham College is dedicated to helping you build upon your previous education. If you have studied previously at Durham College or another recognized postsecondary institution, you may be eligible to receive credit for the courses you have successfully completed. Please view the following link for credit transfer information: www.durhamcollege.ca/credittransfer Durham College Mission, Vision and Values Our mission, vision, values were created to help ensure the success of our students, staff and faculty. Please view our guiding principles at the following link:http://www.durhamcollege.ca/about-us/corporate-links/governance/missionvision-and-values Page 22 of 27
Essential Employability Skills Essential Employability Skills (EES) are skills that, regardless of a student s program or discipline, are critical for success in the workplace, in day-to-day living, and for lifelong learning. Please view the following link for further information: http://www.tcu.gov.on.ca/pepg/audiences/colleges/progstan/essential.html General Education The Ministry of Colleges and Universities requires all Ontario college students enrolled in a 2-year Ontario College Diploma or a 3-year Ontario College Advanced Diploma program to successfully complete three or more General Education (GNED) courses prior to graduation. For more information about GNED course selection, a full listing of GNED electives (with course descriptions), and how to receive GNED credits for prior post-secondary studies, please visit the General Education website at: http://www.durhamcollege.ca/academic-schools/school-of-interdisciplinarystudies-employment-services/general-education Important Dates Durham College strives to keep you informed of all important dates throughout the academic year. Please review the 2014-2015 important dates that includes fee payments, web registration, add/drop, exam dates etc. You can find this information online, in the Durham College handbook and on MyCampus. Please review MyCampus for important updates and reminders on important dates. Learning Management System Usage (LMS) Professors are expected to use LMS or DC Connect to support student learning. As per the Learning Management System Usage procedure, faculty will post and reveal all marks to their students on an ongoing basis. To view the LMS Usage Policy and Procedure, please visit the following link: http://www.durhamcollege.ca/about-us/corporate-links/governance/policies Library The Library is here to help you succeed! Stop by for help to research a topic, complete an assignment, or when you just need a quiet place to study. You may visit the library virtually at http://www.durhamcollege.ca/library or to view information regarding locations, hours, and more, please visit the following link: http://www.durhamcollege.ca/student-experience/learning-spaces/library/aboutthe-library Page 23 of 27
Missed Final Examinations A final examination is a discretely designed assessment administered in Week 15 of a 14 week semester. Students who, as a result of non-emergency circumstances, miss one or more final examinations during a single examination period may be eligible to apply to defer/reschedule the writing of these assessments. To be eligible, students must have no less than a cumulative 1.5 GPA, apply for consideration using the appropriate forms and pay a fee. This privilege can only be used by a student once in a five-year period. External accreditation requirements, the availability of appropriate examination facilities and other constraints necessitate that not all courses will be eligible. For more details, students should speak with their Student Advisor or review the Missed Final Examination Policy and Procedure documents at the following link: http://www.durhamcollege.ca/academicpolicies Pathways to Degrees Continue your post-secondary journey and leverage your Durham College education to earn additional credentials. To learn how you can further your education, visit www.durhamcollege.ca/pathways or check out the Durham College Transfer Guide at www.durhamcollege.ca/transferguide. Additional information regarding transferring between institutions in Ontario can be found at www.ontransfer.ca. Prior Learning Assessment and Recognition (PLAR) Prior Learning Assessment and Recognition (PLAR) is the process you can use to gain college credit(s) for learning and skills acquired through previous experiences. This may include workplace training, life experiences, self-directed study, community work, travel, hobbies and military service. By using the PLAR process, you may be able to complete a college certificate or diploma program in less time. Please view the following link for PLAR information: http://www.durhamcollege.ca/wp-content/uploads/plar.pdf Page 24 of 27
Requirements for Promotion Evaluation and Promotion: Academic courses are evaluated using a variety of methods such as tests, essays, labs, written or verbal assignments, in-process activities, group work and/or final examinations. The evaluation criteria for each course are noted in its course outline. Students are advised to familiarize themselves with these criteria early in the semester. Please refer to the Grading and Promotion Policy and Procedures documents (http://www.durhamcollege.ca/academicpolicies) for a complete overview of grading and promotion practices. Academic Probation: Students who are not progressing satisfactorily according to criteria published in their respective program guides may be placed on academic probation, at the discretion of the school Dean or designate. Such students may be allowed to continue their studies on a Letter of Permission (an academic student contract) which will specify conditions which must be met to continue in their programs. Students who do not meet the conditions of their academic probation may be required to withdraw from full-time studies. Scholarships, Bursaries and Awards The Financial Aid and Awards office provides students with options to help fund their educational costs. To view valuable information, please visit the Financial Aid and Awards Web Site. Student Academic Learning Services (SALS) The Student Academic Learning Services Centre helps Durham College students to achieve their academic goals. Academic supports include: peer tutoring, learning skills services, writing skills services, English language services, and subject specific supports for math, science, and business. Please visit the following link to view valuable information regarding SALS including how to register for 24/7 online access to SALS academic resources: http://durhamcollege.ca/student-experience/helping-you-succeed/studentacademic-learning-services-sals Student Communications Durham College is committed to communicating important information to you. Please view the following link to reference a comprehensive chart indicating specific vehicles. For example, social media, DC website, DC Mail, MyCampus, DC Connect, and more: http://www.durhamcollege.ca/wpcontent/uploads/dccares_studentmatrix_v5.pdf Page 25 of 27
Student Rights and Responsibilities A policy and procedure is in place which articulates the rights and responsibilities of students at Durham College, and provides a framework for addressing nonacademic misconduct by students. To view the Student Rights and Responsibilities Policy and procedure, please visit the following link: http://www.durhamcollege.ca/academicpolicies Page 26 of 27