Quick Guide of HiDDNS Settings (with UPnP)



Similar documents
Quick Guide of DDNS Settings

Quick Guide of DDNS Settings

DDNS Management System User Manual V1.0

HREP Series DVR DDNS Configuration Application Note

Network Setup Guide. 1 Glossary. 2 Operation. 1.1 Static IP. 1.2 Point-to-Point Protocol over Ethernet (PPPoE)

HRG Performance Series DVR DDNS Support Application Note (hrgddns)

Quick Guide of Remote Monitoring via PC or Mobile Phone

Dynamic DNS How-To Guide

Basics of Port Forwarding on a Router for Security DVR s

NETWORK SETUP GLOSSARY

SETTING UP REMOTE ACCESS FOR Q-SEE DVR SYSTEMS MODEL NUMBER: QC40198

How to use EasyDDNS by HIKVISION. All rights reserved. 1


Quick Network Setup Guide

Quick Installation Guide

Quick Installation Guide For Mac users

Volume. Instruction Manual

Quick Installation Guide-For MAC users

Chapter 3 Security and Firewall Protection

NETWORK SETUP INSTRUCTIONS

How to Configure Alarm Notification

Quick Installation Guide

Quick Installation Guide

CONTENTS. 1. Outline of how to use.1 2. How to setup each step...1

HRG Performance Series DVR DDNS Support Application Note (DynDNS)

Network Video Recorder. Operation Manual

How to Remotely Access Hikvision Devices User Manual

F-SECURE MESSAGING SECURITY GATEWAY

7 6.2 Windows Vista / Windows IP Address Syntax Mobile Port Windows Vista / Windows Apply Rules To Your Device

NETWORK SET UP GUIDE FOR

Quick-Start Guide. Remote Surveillance & Playback SUPER DVR MONITORING SOFTWARE. For use on Q-See s QSDT series of PC Securitiy Surveillance Cards

D-LINK DPH-140S SIP PHONE INSTALLATION GUIDE

Chapter 6 Configuring the SSL VPN Tunnel Client and Port Forwarding

Multi-Homing Dual WAN Firewall Router

Firewall VPN Router. Quick Installation Guide M73-APO09-380

Internet Access to a DVR365

Port Forwarding your Router for Use with a Network DVR

(1) Network Camera

SETTING UP REMOTE ACCESS ON EYEMAX PC BASED DVR.

Quick Installation Guide

Multifunctional Broadband Router User Guide. Copyright Statement

How to Configure Alarm Notification

REMOTE ACCESS DDNS CONFIGURATION MANUAL

Configuring a customer owned router to function as a switch with Ultra TV

Application Note Configuring the UGate 3000 for use with ClipMail Pro and ClipExpress

How To Remotely View Your Security Cameras Through An Ezwatch Pro Dvr/Camera Server On A Pc Or Ipod (For A Small Charge) On A Network (For An Extra $20) On Your Computer Or Ipo (For Free

AXIS Camera Companion Internet access

Accessing Remote Devices via the LAN-Cell 2

How to Remotely View Security Cameras Using the Internet

SETTING UP REMOTE ACCESS FOR Q-SEE DVR SYSTEM

Quick Installation Guide

How to configure your Thomson SpeedTouch 780WL for ADSL2+

How to connect NUVICO DVR to the internet

Quick Installation Guide

Configuring TheGreenBow VPN Client with a TP-LINK VPN Router

Quick Installation Guide

Wireless G Broadband quick install

How To Configure Apple ipad for Cyberoam L2TP

Configuration and Access of FTP Server

Technical Support Information

Quick Installation Guide

C n o t n e t n e t n s

FTP Server Application Guide REV:

DSL-G604T Install Guides

Configuration Guide. How to Configure SSL VPN Features in DSR Series. Overview

Quick Installation Guide

Steltronic Focus. Main Desk Internet connection

Network Configuration Settings

TENVIS Technology Co., Ltd. User Manual. For H.264 Cameras. Version 2.0.0

Quick Installation Guide

H0/H2/H4 -ECOM100 DHCP & HTML Configuration. H0/H2/H4--ECOM100 DHCP Disabling DHCP and Assigning a Static IP Address Using HTML Configuration

ivms-4200 Client Software Quick Start Guide V1.02

Connecting EWS using DDNS

ReadyNAS Remote Troubleshooting Guide NETGEAR

CC File Transfer. User Manual

Configuring Security for FTP Traffic

NAS 224 Remote Access Manual Configuration

1:1 NAT in ZeroShell. Requirements. Overview. Network Setup

Port forwarding and viewing your IP camera from the internet

19 LCD / 8 CHANNEL DVR COMBO WITH 160GB HDD & 4 CAMERAS

XMEye Android Mobile Monitoring Client English Manual

Instruction for IE network monitor

Client and Server System Requirements

Savvius Insight Initial Configuration

SECTION 1: FIND OUT THE IP ADDRESS OF DVR To find out the IP of DVR for your DVR do the following:

Networking your DVR Made Easy

Setting up and creating a Local Area Network (LAN) within Windows XP by Buzzons

Use this guide if you are no longer able to scan to Sharpdesk. Begin with section 1 (easiest) and complete all sections only if necessary.

Quick Installation Guide

This document describes the configuration process for video surveillance using a mobile phone and how to configure the domain names of devices.

Quick Installation Guide

Chapter 1 Configuring Basic Connectivity

Protecting the Home Network (Firewall)

Chapter 6 Using Network Monitoring Tools

Document No. FO1001 Issue Date: Draft: Work Group: FibreOP Technical Team October 1, 2013 Final:

Port Forwarding for CCTV. How to See Video Offsite

PowerLink Bandwidth Aggregation Redundant WAN Link and VPN Fail-Over Solutions

PC/POLL SYSTEMS Version 7 Polling SPS2000 Cash Register TCP/IP Communications

Transcription:

Quick Guide of HiDDNS Settings (with UPnP) Solution 1: With the development of surveillance systems, more and more users want to use ADSL to realize video surveillance through network. But ADSL gives dynamic IP addresses and here is the one most widely used solution for internet access: DDNS, considering the features of ADSL and the practical situation. Make sure your device is able to be previewed and remote configured in the LAN. IP address, subnet mask and gate way of the device is already filled in correctly. Make sure the firewall and security software open all the ports needed for the internet access. DVR local menu > Configuration > Network > General. For DNS Server IP, you can refer to the PC connected in the same LAN. 1

Steps: 1. Port Mapping. The following setting is about TP-LINK router (TL-ER340G), which is maybe distinct from other router s setting. 1) Firstly, select the router s WAN connection type. 2) Set the network parameter of the router as the below figure. The setting includes subnet mask and gateway. 3) Set the port map in the virtual servers of forwarding. By default, all the DVRs use port 80, 8000, 554 and 8200. For DVR, 80, 8000 is essential (for some new module DVR 554 also needed.) The following figure gives the illustration. One DVR ports are 80, 8000, (554, 8200) and its IP address is 192.168.1.23. The other DVR ports are 81, 8001, (555, 8201) and IP is 192.168.1.24. Afterwards, enable all or TCP protocols. Enable the port map after pressing the Save. As the settings mentioned above, map the router s port 80 and 8000 to the DVR at 192.168.1.23; and port 81 and 8001 to the DVR at 192.168.1.24. In this way, user can access the 192.168.1.23 through accessing the router s port 80 and 8000. 2

The DVR cannot conflict with other ports. For example, some router s web management port is 80. User can amend the router s or the device s port to solve this problem. Also sometime this problem is caused by the telecom operator. So the http port 80 is probably needed to be changed. For port 8200, it will be modified automatically when you change the port 8000. You only need to add the port mapping in the router. 2. HiDDNS setting. DVR local menu > Configuration > DDNS > Enable the DDNS > Select HiDDNS > Input the Domain name > Apply. After Apply, if it shows nothing, means successful register. If it shows Communication to the server failed, please double check the network and DNS settings. Solution 2 (With UPnP): If your device and router support the UPnP function, with this UPnP function, you don t need to do the port forwarding configuration anymore, all the setting will be don t by devices itself. And after some simple settings in the device, you can easily have the remote access through 3

internet. Please enable the UPnP function in your router in advance. showing in the General interface. UPnP settings in the DVR local menu: DDNS Management System (optional): If you have several devices, you can use our DDNS Management System to check the entire status and device log. 1. Login Open Internet Explorer In the address bar, type IP address of DDNS Management Server Http://www.hiddns.com If you don t have an account, please click register new user to create a new user. 4

2. Device Management After login, Click Device Management, there is no device at first time. Click Add button to add device. Enter in Device name and serial number. By default, http port is 80. If http port of device was changed from 80, please enter new port in Http Port area. Http port uses the port to the port poding. The Device Alias here is used for previewing, if you change the Device name here, then the domain name in DVR will be invalid. And you must fill in the correct Device Serial No. 3. Device status. Click Device Status to show all added devices information like Serial number, Dynamic IP, HTTP port, DDNS IP address. And you can just click the Device Link URL to start previewing. Remote Access: Web After you finish the settings in solution 1/2, then you could access the device directly through web browser by using the URL below, as long as the device is online. http://www.hiddns.com/domaingiven ByYou. Example: http://www.hiddns.com/sample01 5