Get Success in Passing Your Certification Exam at first attempt!
Vendor: Microsoft Exam Code: 70-417 Exam Name: Microsoft Upgrading Your Skills to MCSA Windows Server 2012 Exam Version: Demo
Question: 1 Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2. You need to create 3-TB virtual hard disk (VHD) on Server1. Which tool should you use? A. New-StorageSubsytemVirtualDisk B. New-VirtualDisk C. Server Manager D. Computer Management Answer: B Question: 2 Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 and Server2 are part of a workgroup. On Server1 and Server2, you create a local user account named Admin1. You add the account to the local Administrators group. On both servers, Admin1 has the same password. You log on to Server1 as Admin1. You open Computer Management and you connect to Server2. When you attempt to create a scheduled task, view the event logs, and manage the shared folders, you receive Access Denied messages. You need to ensure that you can administer Server2 remotely from Server1 by using Computer Management. What should you configure on Server2? A. From Local Users and Groups, modify the membership of the Remote Management Users group. B. From Server Manager, modify the Remote Management setting. C. From Windows Firewall, modify the Windows Management Instrumentation (WMI) firewall rule. D. From Registry Editor, configure the LocalAccountTokenFilterPolicyresgistry value Answer: D Question: 3 Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. On a server named Server2, you perform a Server Core Installation of Windows Server 2012 R2. You join Server2 to the contoso.com domain. You need to ensure that you can manage Server2 by using the Computer Management console on Server1. What should you do on Server2? A. Run sconfig.exe and configure remote management. 111
B. Run sconfig.exe and configure Remote Server Administration Tools (RSAT). C. Install Windows Management Framework. D. Install Remote Server Administration Tools (RSAT). Answer: A Explanation: In Windows Server 2012, you can use the Server Configuration tool (Sconfig.cmd) to configure and manage several common aspects of Server Core installations. You must be a member of the Administrators group to use the tool. Sconfig.cmd is available in the Minimal Server Interface and in Server with a GUI mode. Incorrect answers: A: RSAT includes tools like Server manager, MMC snap-in and consoles, etc. but it will not allow you to manage Server2 from Server1. You need to enable remote management. B: Installing Windows Management Framework is used to configure remote management on Windows Server 2008. D: RSAT includes tools like Server manager, MMC snap-in and consoles, etc. but it will not allow you to manage Server2 from Server1. You need to enable remote management. References: http://technet.microsoft.com/en-us/library/jj647766.aspx Training Guide: Installing and Configuring Windows Server 2012, Chapter 2: Deploying servers, p. 80 Question: 4 Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. Server1 runs Windows Server 2012 R2. 5erver2 runs Windows Server 2008 R2 Service Pack 1 (SP1) and has the DHCP Server server role installed. You need to manage DHCP on Server2 by using the DHCP console on Server1. What should you do first? A. From the Microsoft Management Console on Server1, add a snap-in. B. From Server Manager on Server2, enable Windows Remote Management. C. From Windows PowerShell on Server2, run Enable-PSRemoting. D. From Server Manager on Server1, install a feature. Answer: B Question: 5 Your network contains a server named Server1 that runs Windows Server 2012. Server1 has the Hyper-V server role installed. Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4. Server1 is configured as shown in the following table. 112
You install Windows Server 2012 on VM2 by using Windows Deployment Services (WDS). You need to ensure that the next time VM2 restarts, you can connect to the WDS server by using PXE. Which virtual machine setting should you configure for VM2? A. NUMA topology B. Resource control C. Resource metering D. Virtual Machine Chimney E. The VLAN ID F. Processor Compatibility G. The startup order H. Automatic Start Action I. Integration Services J. Port mirroring K. Single-root I/O virtualization Answer: G Explanation: G. Configure the BIOS of the computer to enable PXE boot, and set the boot order so that it is booting from the network is first. Incorrect answers: A: NUMA spanning is a processor setting that works by projecting a virtual NUMA topology to the guest operating system in a way that is optimized to match the NUMA topology of the underlying physical host machine. The effect is to provide virtual machines with additional computing resources for high-performance server applications such as Microsoft SQL Server and modern server operating systems such as Windows Server 2012 that include built-in NUMA optimizations. B: Resource control in used in the event where you need to adjust the computing resources of a virtual machine, you can reconfigure the resources to meet the changing needs. You can also specify resource controls to automate how resources are allocated to virtual machines. C: Resource metering includes: Average CPU usage, measured in megahertz over a period of time. Average physical memory usage, measured in megabytes. Minimum memory usage (lowest amount of physical memory). Maximum memory usage (highest amount of physical memory). Maximum amount of disk space allocated to a virtual machine. Total incoming network traffic, measured in megabytes, for a virtual network adapter. Total outgoing network traffic, measured in megabytes, for a virtual network adapter 113
D: Virtual Machine Chimney or TCP Chimney Offload as it is also known, transfers Transmission Control Protocol (TCP) traffic processing, such as packet segmentation and reassembly processing tasks, from a computer s CPU to a network adapter that supports TCP Chimney Offload. Moving TCP/IP processing from the CPU to the network adapter can free the CPU to perform more application-level functions. TCP Chimney Offload can offload the processing for both TCP/IPv4 and TCP/IPv6 connections if supported by the network adapter. E: VLAN ID is used to specify a segment of the VLAN or isolate network traffic for the virtual network adapter. F: Processor settings is used to configure the number of virtual processors that the virtual machine uses, enable processor compatibility to allow live migrations to hosts having a different processor architecture, or configure the NUMA topology on a NUMA-capable host. H: Automatic start action allows you to specify what the virtual machine should do when the host machine boots up. The options you can choose from are to automatically start the virtual machine if it was running when the VMM service on the host stopped (the default), to always start the virtual machine automatically, or to do nothing. You can also specify a startup delay in seconds to reduce resource content between different virtual machines starting up on the host. I: Integration Services settings on virtual machines include services such as operating system shutdown, time synchronization, data exchange, Heartbeat, and Backup (volume snapshot services. J: With Hyper-V Virtual Switch port mirroring you can monitor network traffic not modify the startup order. K: Single-root I/O virtualization -capable network adapters can be assigned directly to a virtual machine to maximize network throughput while minimizing network latency and the CPU overhead required for processing network traffic. References: http://technet.microsoft.com/en-us/library/cc766320(v=ws.10).aspx Exam Ref 70-410, Installing and Configuring Windows Server 2012, Chapter 3: Configure Hyper-V, Objective 3.1: Create and Configure virtual machine settings, p. 144 Training Guide: Installing and Configuring Windows Server 2012: Chapter 7: Hyper-V Virtualization, Lesson 2: Deploying and configuring virtual machines, p. 335 Question: 6 Your network contains an Active Directory forest. The forest contains two domains named contoso.com and corp.contoso.com. All domain controllers run Windows Server 2012 R2 and are configured as global catalog servers. The corp.contoso.com domain contains a domain controller named DC1. You need to disable the global catalog on DC1. What should you do? A. From Active Directory Users and Computers, modify the properties of the DC1 computer account. B. From Active Directory Administrative Center, modify the properties of the DC1 computer account. C. From Active Directory Domains and Trusts, modify the properties of the corp.contoso.com domain. D. From Active Directory Sites and Services, modify the NTDS Settings of the DC1 server object. Explanation: Answer: D 114
When you navigate your way to the Active Directory Sites and Services\Sites\SiteName\Servers then in the details pane, right-click NTDS Settings of the selected server object, and then click Properties. There will you get access to the Global Catalog check box to add the global catalog, or clear the check box to remove the global catalog. Incorrect answers: A: The Active Directory Users and Computers console does not allow you to remove the global catalogue. B: The Active Directory Administrative Center does not give to access to the NTDS settings that you need to access to remove the global catalogue. D: He Active Directory Domains and Trust console will not give you access to the NTDS settings that you need to disable the global catalogue. References: http://technet.microsoft.com/en-us/library/cc755257.aspx Question: 7 HOTSPOT Your network contains an Active Directory domain named contoso.com. You need to identify whether the Company attribute replicates to the global data. Which part of the Active Directory partition should you view? To answer, select the appropriate Active Directory object in the answer area. Answer: 115
Explanation: An Active Directory Lightweight Directory Services (AD LDS) schema defines, using object classes and attributes, the types of objects and data that can be created and stored in an AD LDS directory. The schema can be extended with new classes and attributes, either by administrators or by the applications themselves. In addition, unneeded schema classes and attributes can be deactivated. References: http://technet.microsoft.com/en-us/library/cc771975.aspx http://technet.microsoft.com/en-us/library/cc731547.aspx Question: 8 You have a server named Server1 that runs a Server Core Installation of Windows Server 2012 R2. You attach a 4-TB disk to Server1. The disk is configured as an MBR disk. You need to ensure that you can create a 4-TB volume on the disk. Which Diskpart command should you use? A. Automount B. Convert C. Expand D. Attach Answer: B Explanation: You will need to convert the disk to a GPT since GPT disks allows for partitioning and not MBR disks. Incorrect answers: 116
A: This is the wrong command to use to create a 4TB volume on the disk. C: There is no need to expand the disk. D: This is not the appropriate Diskpart command to use. References: Exam Ref 70-410: Installing and Configuring Windows Server 2012: Objective 3.2: Create and Configure virtual machine storage, Chapter 3: p. 159 Exam Ref 70-410: Installing and Configuring Server 2012: Objective 1.3: Installing and Configuring servers, Chapter 1: p. 42-43 Question: 9 HOTSPOT You have a server named DHCP1 that runs Windows Server 2012 R2. DHCP1 does not have access to the Internet. All roles are removed completely fromdhcp You mount a Windows Server 2012 R2 installation image to the C:\Mount folder. You need to install the DHCP Server server role on DHCP1 by using Server Manager. Which folder should you specify as the alternate path for the source files? To answer, select the appropriate folder in the answer area. 117
Answer: 118
Explanation: WinSxS, the side-by-side component store enables administrators to activate any of the features included with Windows Server 2012 without having to supply an installation medium. References: http://blogs.technet.com/b/askpfeplat/archive/2013/02/24/how-to-reduce-the-size-of-the-winsxsdirectory-andfree-up-disk-space-on-windows-server-2012-using-features-on-demand.aspx Exam Ref 70-410: Installing and configuring Windows Server 2012, Chapter 1: Installing and configuring servers, Objective 1.1: Install servers, p. 10 119
Question: 10 DRAG DROP Your network contains an Active Directory domain named contoso.com. All client computers run Windows 7. Group Policy objects (GPOs) are linked to the domain as shown in the exhibit. (Click the Exhibit button.) GPO2 contains user configurations only and GPO3 contains computer configurations only. You need to configure the GPOs to meet the following requirements: Ensure that GPO2 only applies to the user accounts in OU2 that are members of a global group named Group2. Ensure that GPO3 only applies to the computer accounts in OU3 that have more than 100 GB of free disk space. What should you do? To answer, drag the appropriate setting to the correct GPO. Each setting may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. 120
Answer: Question: 11 Your network contains a Windows Server 2012 R2 image named Server12.wim. Server12.wim contains the images shown in the following table. Server12.wim is located in C:\. You need to enable the Windows Server Migration Tools feature in the Windows Server 2012 R2 Datacenter image. You want to achieve this goal by using the minimum amount of administrative effort. Which command should you run first? A. imagex.exe /apply c:\server12.wim 4 c:\ B. dism.exe /image:c:\server12.wim /enable-feature /featurename:servermigration C. imagex.exe /capture c: c:\server12.wim "windows server 2012 r2 datacenter" D. dism.exe /mount-wim /wimfile:c:\server12.wim /index:4 /mountdir:c:\mount 121
Explanation: This command will mount the image before making any changes. Incorrect answers: B. The imagex /capture command is used to create windows images.wim C. You need to mount the image first. D. The imagex /apply command is used to apply image to drive. References: http://technet.microsoft.com/en-us/library/cc749447(v=ws.10).aspx http://technet.microsoft.com/en-us/library/dd744382(v=ws.10).aspx Answer: D Question: 12 Your network contains an Active Directory domain named contoso.com. Network Access Protection (NAP) is deployed to the domain. You need to create NAP event trace log files on a client computer. What should you run? A. Register-EngineEvent B. Tracert C. Register-ObjectEvent D. Logman Answer: D Explanation: Register-ObjectEvent: Monitor events generated from.net Framework Object. Register-EngineEvent: Subscribes to events that are generated by the Windows PowerShell engine and by the New-Event cmdlet. http://technet.microsoft.com/en-us/library/hh849967.aspx tracert: Trace IP route logman: Manages and schedules performance counter and event trace log collections on a local and remote systems. http://technet.microsoft.com/en-us/library/bb490956.aspx Question: 13 You are a network administrator of an Active Directory domain named contoso.com. You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the DHCP Server server role and the Network Policy Server role service installed. You enable Network Access Protection (NAP) on all of the DHCP scopes on Server1. You need to create a DHCP policy that will apply to all of the NAP non-compliant DHCP clients. Which criteria should you specify when you create the DHCP policy? 122
A. The user class B. The vendor class C. The client identifier D. The relay agent information Answer: A Question: 14 Your network contains a Hyper-V host named Server1 that hosts 20 virtual machines. You need to view the amount of memory resources and processor resources each virtual machine uses currently. Which tool should you use on Server1? A. Resource Monitor B. Task Manager C. Hyper-V Manager D. Windows System Resource Manager (WSRM) Answer: C Question: 15 Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. All domain controllers run Windows Server 2012 R2. The domain contains two domain controllers. The domain controllers are configured as shown in the following table. Active Directory Recycle Bin is enabled. You discover that a support technician accidentally removed 100 users from an Active Directory group named Group1 an hour ago. You need to restore the membership of Group1. What should you do? A. Perform tombstone reanimation. 123
B. Export and import data by using Dsamain. C. Perform a non-authoritative restore. D. Recover the items by using Active Directory Recycle Bin. Answer: B Question: 16 Your network contains an Active Directory domain named contoso.com. The domain contains a read-only domain controller (RODC) named RODC1. You create a global group named RODC_Admins. You need to provide the members of RODC_Admins with the ability to manage the hardware and the software on RODC1. The solution must not provide RODC_Admins with the ability to manage Active Directory objects. What should you do? A. From Active Directory Users and Computers, configure the Managed By settings of the RODC1 account. B. From Windows PowerShell, run the Set-ADAccountControlcmdlet. C. From a command prompt, run the dsadd computer command. D. From Active Directory Sites and Services, run the Delegation of Control Wizard. Answer: A Question: 17 Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2. In a remote site, a support technician installs a server named DC10 that runs Windows Server 2012 R2. DC10 is currently a member of a workgroup. You plan to promote DC10 to a read-only domain controller (RODC). You need to ensure that a user named Contoso\User1 can promote DC10 to a RODC in the contoso.com domain. The solution must minimize the number of permissions assigned to User1. What should you do? A. From Active Directory Administrative Center, pre-create an RODC computer account. B. FromDsmgmt, run the local roles command. C. Join DC10 to the domain. Modify the properties of the DC10 computer account. D. Join DC10 to the domain. Run dsmod and specify the /server switch. Answer: A 124
Question: 18 DRAG DROP Your network contains an Active Directory forest named contoso.com. Recently, all of the domain controllers that ran Windows Server 2003 were replaced by domain controllers that run Windows Server 2012 R2. From Event Viewer, you discover SYSVOL journal wrap errors on a domain controller named dclo.contoso.com. You need to perform a non-authoritative synchronization of SYSVOL on DC10. Which three actions should you perform on DC10? To answer, move the three appropriate actions from the list of actions to the answer area and arrange them in the correct order. Answer: 125
Question: 19 Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2. DirectAccess is deployed to the network. Remote users connect to the DirectAccess server by using a variety of network speeds. The remote users report that sometimes their connection is very slow. You need to minimize Group Policy processing across all wireless wide area network (WWAN) connections. Which Group Policy setting should you configure? A. Configure Direct Access connections as a fast network connection. B. Change Group Policy processing to run asynchronously when a slow network connection is detected. C. Configure Group Policy slow link detection. D. Configure wireless policy processing. Answer: C 126
About Us We provide the most accurate IT exam study materials As a professional IT exam study material provider, we gives you more than just exam questions and answers. We provide our customers with the most accurate study material about the exam and the guarantee of pass. We assist you to prepare for almost all the main certifications which are regarded valuable the IT sector. You can easily find all kinds of IT exam Q&As on our site. All the study material provided by us are selected by experts in this field. The questions and answers are very easy to understand, and they're especially great for professionals who have really little time to focus on exam preparations for certifications, due to their work and other private commitments. We provide you 100% money back guarantee We guarantee your success at your first attempt with our product. If you do not pass the exam at your first try with our materials, we will give you a full refund. We provide you 7*24 assistant We provide you with 7*24 customer service to assistant. You can contact us when you need help with our study materials or any problems about the IT certification exams. We are ready to help you at any time. Need help? Need help? Please provide as much detail as possible so we can best assist you. To update a previously submitted ticket: Any charges made through this site will appear as Global Simulators Limited. All trademarks are the property of their respective owners.