Ongoing inventory management with the Pyxis MedStation



Similar documents
Measurable improvements in medication management

Purpose: To provide guidelines for the safe administration, proper documentation and auditing of controlled substances by nursing personnel.

Login. 1. Enter your User ID into the User ID text box using the keyboard. 2. Use the Tab or Enter key to move to the PIN text box.

Optimizing medication safety:

Analysis of the medication management system in seven hospitals

NOTE: In the event that the seal is accidentally broken, the narcotic may be wasted via narcotic wastage procedures.

Transforming the pharmacy into a strategic asset

Inventory Management

INSTRUCTIONS FOR USE: OA-RX

Table of Contents. User Request for Access User Login Upload a Data File... 4

The Brigham and Women s Hospital Department of Pharmacy

Oracle Utilities Work and Asset Management

Automating the Pharmacy Medication Cycle in Acute Care Settings

BOARD OF PHARMACY DIVISION 41 OPERATION OF PHARMACIES (RETAIL AND INSTITUTIONAL DRUG OUTLETS) CONSULTING PHARMACISTS AND OPERATION OF DRUG ROOMS

Technician. Chapter 6: Inventory Management for the Pharmacy. 4 Contact Hours. Learning objectives. Introduction

Inventory Management

PHARMACY TECHNICIAN SERIES

eprescribe FAQs General Application FAQs

User Guide for TASKE Desktop

03 PHARMACY TECHNICIANS

FLEETMATE. Overview. Work Order Features. CUSTOMER GUIDE: Work Orders

Event Log. Chapter 7 Event Log Event Log Management Excel Editing Create a New Event Log... 9

Challenges of the Cartfill and Cartless Models of Drug Distribution

PDMP User s Guide. Oregon Health Authority Prescription Drug Monitoring Program

vrealize Operations Manager User Guide

Governance of Controlled Drugs using Automated Cabinet-based Stock-control Systems

Educational Outcomes for Pharmacy Technician Programs in Canada

DAISY 4.2. New features. Electronic prescribing with erx Integrated credit card processing with DAISY InCharge

Storage and RFID Solutions. Right on hand. Without counting by hand.

Cornerstone Practice Explorer User s Guide

INTERCALL ONLINE Administrator Invoices User Guide

INSTITUTIONAL POLICY AND PROCEDURE (IPP) Department: Manual: Section: EFFECTIVE DATE REVIEW DUE REPLACES NUMBER NO. OF PAGES

Inventory Tracking Electronic Asset Management System (ITEAMS) Training. Extended Provider Network (EPN) Training

Training Guide for Data Requesters

Distribution Training Guide. D100 Inventory Management: Basic

REGULATION 3 PHARMACY TECHNICIANS

PUBLIC HEALTH CLINICS: A. CLINIC LICENSURE: (1) All clinics where dangerous drugs are administered, distributed or dispensed shall obtain

DISCLAIMER OBJECTIVES IV ROBOTICS IV ROBOTICS

CHAPTER 31 DRUG DISTRIBUTION SYSTEMS

LOUISIANA PRESCRIPTION MONITORING PROGRAM

WELCOME TO REVEL SYSTEMS RETAIL SERVICE... 5 STARTING YOUR WORK Logging In to Your POS Refreshing the POS Settings...

UTCVM PHARMACY STANDARD OPERATING PROCEDURES

TRIMS Cloud Computing

Express222 Quick Reference

Penn State University (PSU)

Overcome inventory management challenges with our comprehensive suite of solutions

ClinicalConnect EMR Download Training Guide

Event Log. Chapter 7 Event Log Event Log Management Excel Editing Create a New Event Log... 10

Table of Contents. Copyright Symphonic Source, Inc. All rights reserved. Salesforce is a registered trademark of salesforce.

CHAPTER CONSULTING PHARMACIST REGULATIONS FOR LONG-TERM CARE FACILITIES (SKILLED, INTERMEDIATE, AND BASIC CARE)

Storage and RFID Solutions. Right on hand. Without counting by hand.

SPAN. White Paper. Warehouse Management through Mobile. Abstract. Warehouse Management through Mobile

Policies and Procedures. Number: 1127

SUPPLEMENTAL HANDOUT FOR INPATIENT PHARMACISTS

PRESCRIPTION MONITORING PROGRAM (PMP)

MEDITECH TRAINING MANUAL PHARMACY APPLICATION. General Information

Technician Tutorial: The Ins and Outs of Pharmacy Inventory

Query and Reports Tutorial. Minnesota Board of Pharmacy Prescription Monitoring Program

ExCPT Certified Pharmacy Technician (CPhT) Detailed Test Plan* 100 scored items, 20 pretest items Exam time: 2 hours 10 minutes

UW School of Dentistry Comprehensive Medication Policy

Affiliated Provider Billing/Coding

PharmNet Tech/Buyer Training Guide

DIVISION OF CORPORATIONS, BUSINESS AND PROFESSIONAL P.O. BOX JUNEAU, ALASKA ALASKA STATE BOARD OF PHARMACY

Lean Healthcare Solutions. StockBox, Smart Cabinet & LogiTrack

RN Finish Guide. RN Finish an Order. 1. Click the Resources tab. 2. Select RPMS Session from the RPMS menu (Figure 1).

Pharmacy Program Pre-Test

Pharmacy Technician A. Interpersonal Skills Physical Effort Concentration Complexity

Algoritmos Procesos y Diseños S.A. +25 years developing tailored-made solutions for the Healthcare Community. Healthcare division

TimeValue Software Due Date Tracking and Task Management Software

QuickService Software Training. Equipment Tracking

INVENTORY MANAGEMENT

FREQUENTLY ASKED QUESTIONS

What s New in Version 12

Web Dashboard. User Manual. Build

REPORTS 4 YOU for VTIGER CRM 6.x

Alerts Pane Headers Alerts Pane... 3 Workflow Status Workflow Key... 4 Activity Filter Document Search... 5

mobiletws for iphone

IAC 10/5/11 Pharmacy[657] Ch 40, p.1 CHAPTER 40 TECH-CHECK-TECH PROGRAMS

DocAve 4.1 Backup User Guide

Inventory Valuation -

Calibration Control. Calibration Management Software. Tools for Management Systems

How To Use Ezcrt Computer Rental For A Rental

IDEXX Cornerstone* Single Location Inventory 8.3

Licensed Pharmacy Technician Scope of Practice

Investigational Drugs: Investigational Drugs and Biologics

Helping Clinicians Get Out of the Supply Room and Back to Their Patients. How Medical West Hospital transformed its supply chain

OneStep Java Point of Sales

MEDICARE.GOV DRUG PLAN FINDER TOOL

Inventory User s Guide. Version IN76

CDC Enterprise Inventory Management System. The Basics

Utility Billing Software Manual

IDEXX Cornerstone* Initiating Inventory Management 8.3. Participant Workbook

H 5230 S T A T E O F R H O D E I S L A N D

Introduction. KIC Help Desk Guide v. 2.7

Training Guide for Florida Practitioners and Pharmacists. Florida Department of Health Prescription Drug Monitoring Program

Web Help Desk Technician Guide

NARCOTIC AND CONTROLLED DRUG MANAGEMENT

in The Institute of Internal Auditor's

Custodial Procedures Manual Table of Contents

AiM User Guide Work Management Module

Transcription:

Ongoing inventory management with the Pyxis MedStation system Introduction Stock levels and drug lists are dynamic in the Pyxis MedStation TM system, especially when most medication(s) are distributed via profiled stations. Many factors influence which medication will be needed on a nursing unit over time. Some of these influences include: Seasonal changes, such as infections and injury types Physician staff changes, such as a new cardiologist who prescribes different medications Standards of practice changes, due to literature recommendations Patient population changes, where the hospital offers a new or different service Best practice is to remove medications not needed on a nursing unit from the Pyxis MedStation system to make space for medications with orders. Medications returned to pharmacy are available for replenishment of other Pyxis MedStation systems, which minimizes unnecessary purchases and stock on hand. This will also prevent unnecessary replacement of stock in a Pyxis MedStation system that has expired, which is a direct financial cost to the facility. Objectives The following practices will support optimal inventory management of the Pyxis MedStation system: 1. Manage loads and unloads of medications. 2. Manage and reduce stock-outs. 3. Optimize refill activities based on medication usage. 4. Manage expired medications using the Outdate Tracking feature. 5. Institute a quarterly review process. Loads and unloads Develop standard procedures for delivering medications entered into the pharmacy information system that are not in the Pyxis MedStation system where the patient is located. Options include: Load the medication into the Pyxis MedStation system (recommended practice) Send an interim dose until the medication is loaded (requires labeling medication with patient-specific label) Do not load the medication and send as patient-specific medication (requires maintaining a mini cassette fill ) There are three options for notification: Ordered Med Not Loaded bulletin Ordered Med Not Loaded report Pharmacy Information System Load Label

Ordered Meds Not Loaded bulletin (OMNL bulletin) To facilitate immediate loading, Ordered Meds Not Loaded (OMNL) bulletins can be turned on to print and/ or display in order to alert pharmacy when a medication is ordered but not currently loaded in a Pyxis MedStation system. Use the OMNL bulletins when all newly ordered, non-loaded medications are immediately loaded into the Pyxis MedStation system. Note: To turn off OMNL bulletins for medications the hospital decides will never be loaded into the Pyxis MedStation system, deselect the Print option in the formulary set up. Ordered Meds Not Loaded report (OMNL report) If a pharmacy chooses to send first or interim doses directly to the nursing unit and only load medications periodically throughout the day, the OMNL report will facilitate the batching of loads. The OMNL report can be generated on demand or set up to print at a designated time in a designated format (BATCH mode). To utilize the OMNL report most effectively, it is important to determine how far in the future the report should look for new orders. This setting is accessed by going to System Settings and picking Site Specific Options. In the Site Information screen, click the Reports tab and change the Time Options setting located at the top of the screen located in the Site Information tab of the System Settings. (See the Pyxis MedStation 4000 system console user guide for specific set up instructions for this feature). An advantage of using the OMNL report over the OMNL bulletin is the ability to filter out Pyxis MedStation systems where you do not want to load new medications. For 24-hour facilities wishing to load new medications each shift, set Looks into the future for orders at 8-12 hours. Set up a batch OMNL report to print each shift. For non-24-hour facilities, determine the number of times to load new medications each day. If done twice a day, set the future setting to 12 hours. If done once a day, set to 24 hours. To turn off OMNL for specific formulary items that the hospital decides not to load and not to display at the Pyxis MedStation system, set Display option to Only When Loaded. This setting is found on the option tab of the formulary item. By setting the formulary item to display only when loaded, the patient s profile at the station will show ordered formulary items that are loaded in the station (e.g., if large volume IV medication is not loaded in the station, it will not display on the profile). Loading the right quantity The following chart can be used as a guide to determine the quantity of medication to load, and to standardize practice among pharmacy technicians. Many facilities will post this chart at the console to guide standardization. SIG MAX MIN Daily 10 3 Two times daily 20 6 Three times daily 30 9 Four times daily 40 12 Table 1: Quantity of medications to load (maximum and minimum levels) Finding a pocket to load the medication If all pockets are full in a Pyxis MedStation system and a medication must be unloaded to make space for a new medication, develop a standardized practice for staff to follow: Least Removed feature: Use the Least Removed feature at the console and unload the medication that has been used the least, with the exception of standard stock (see note below). This will streamline the load/unload process, reduce errors in unloading decisions and promote stock rotation. Note: To best utilize this method, it is crucial to have Standard Stock toggled On only for medications that are needed for urgent patient care and which should never be removed from the Pyxis MedStation system for clinical reasons. Each Pyxis MedStation system can have different medications marked as standard stock. 2

Removing unused medications: Another method to make pockets available for medication loading is to review the Meds Without Removals report. Unload medications that are not standard stock and have not been removed in the last 90 days (60 days if there are space constraints). This will make pockets available for new loads. Best practice is to review this report monthly and remove inventory not used in the last 60-90 days. Monitoring Load/Unload activities Review the console Load/Unload report monthly, sorted by med, to identify like medications with multiple loads and unloads in the same 30-day period. Medications that are loaded/unloaded multiple times in the same month indicate increased pharmacy workload and wasted time. Stock-outs Stock-outs should be managed on an ongoing basis as they occur. A stock-out must be refilled promptly. There are three kinds of stock-outs: Known (or visible) stock-out: The system determines the inventory count is zero and a stock-out bulletin is generated. Medications are not physically in the pocket and the user cannot access the pocket. Stock-outs are managed by increasing the Min quantity for the affected pocket and adjusting the Max quantity based on the new Min setting. Blind stock-out: The count is greater than zero and a stock-out bulletin is not generated. The pocket opens, but there are no medications in the pocket. False stock-out: The system shows a count of zero and a stock-out bulletin is generated; however, medications are found in the pocket upon refill. The user cannot access the pocket because the medication will be grayed out on the Pyxis MedStation system. Management of stock-outs Known Stock-Outs On the console, set the Stock-Out bulletin to print automatically. When a stock-out occurs, refill as soon as possible because the nurse has no access to the stocked-out medication Save the Stock-Out bulletin for the Pyxis System Manager The Pyxis System Manager or designee should increase the Min level and the Max level to maintain a 3-day Min and 10-day Max level Monitor by reviewing the console Refill Activity report or the Stock-Out report located within Pyxis Med Analytics Blind Stock-Outs Monitor by reviewing the Blind Stock-Outs report located within Pyxis Med Analytics When a blind stock-out occurs, refill the medication when notified by nursing because the nurse has no access to the stocked out medication Educate staff on the importance of correctly recording the quantities removed and refilled Share information with nursing leadership to investigate possible reasons and solutions for blind stock-outs Consider turning the Count feature or Blind Count on or placing in a CUBIE pocket for items with frequent Blind Stock-Outs Monitor by reviewing the Vend/Refill report and the Blind Stock-Outs report, which can be generated from the Pyxis Med Analytics offerings False stock-outs When a false stock-out occurs, refill the medication as soon as possible because the nurse cannot access the falsely stocked-out medication, even though the medication is in the Pyxis MedStation system Educate staff on the importance of correctly recording the quantities removed and refilled Monitor by reviewing the Refill Activity report, or the Stock- Out report located within Pyxis Med Analytics 3

Refills Target each medication for refill 3-5 times per month in order to optimize pharmacy labor, preserve medication safety and manage inventory costs. Using a 3-day Min and 10-day Max, each medication would be refilled approximately four times per month. Adjust quantities of medications to meet this benchmark, space permitting. 1. Review the inventory of each Pyxis MedStation system once every three months, looking for medications with refills outside the targeted range. 2. Review one Pyxis MedStation system or all systems on a single nursing unit per business day until all are finished, and then cycle through, repeating the sequence (this process could take over 2 months in large hospitals, depending on the number and locations of Pyxis MedStation systems). 3. Run the Meds Without Removal report from the console. Remove medications that have not been refilled in the last 60-90 days, excluding those designated as Standard Stock. This will free up pockets that can be used for increased inventory levels. 4. From the Pyxis Med Analytics offerings, run the Meds Without a Removal > 90 Days report to identify what meds should be removed from the Pyxis MedStation system. Also, to modify mins and maxes, run the Stock-Out report. 5. If you do not have Pyxis Med Analytics offerings, an alternative is to use Console reports. From the console, run an Activities report of med refill activities sorted by Stn/Med for 30 Days. 6. Review the report for medications that have been refilled more than five, or less than two, times per month. Items with no refills will not display on this report. Do not include items that have been restocked from the return bin (best practice is to return all medication to pharmacy). 7. For medications that must be counted, make certain the maximum level is a reasonable quantity to count; use multiple pockets if necessary. 8. Limit the quantity of high-risk medications available. Managing medications in multiple pockets in the same Pyxis MedStation system When adjusting Max/Min levels, it may be necessary to use more than one pocket to accommodate the required quantity. Sequential draining will be triggered as one pocket is emptied and the next pocket is accessed. Multiple pockets of the same drug may be in different drawers, in the same MiniDrawer secure medication dispensing pockets in multi-dose mode (typically used for controlled substances) or in CUBIE pockets. For MiniDrawer, Carousel or Matrix pockets The following settings will force the software to deplete the quantity of medication in a pocket to zero before opening the next pocket. Example: Max Min Pocket A 10 0 Pocket B 10 0 Pocket C 10 9 Total 30 9 Pocket A will open for medication removals until the Min reaches 0. Pocket B will open when the Min in pocket A reaches 0, and will continue to open until the Min reaches 0. Pocket C will open when the Min reaches 0 in Pocket B. The name of the medication will appear on the Refill report for replenishment when the Min reaches 9. For CUBIE pockets Sequential draining for CUBIE pockets is different. The system programming recognizes the total Min and total Max for all pockets of the same med ID. With the following settings, the software will deplete the quantity of medication in a pocket to zero before opening the next available pocket. Example: Max Min Pocket 1 10 3 Pocket 2 10 3 Pocket 3 10 3 Total 30 9 4

This medication will appear on the refill list when the total of 9 are remaining for that line item. Each CUBIE pocket is sequentially number stamped (like date and time stamp) with each load or refill. The sequential drain programming will aid the rotation of stock when empty CUBIE pockets are refilled, not partially full pockets. If a partially full CUBIE pocket is refilled, it will reset the time and date stamp. In this example, if only pockets 1 and 2 are refilled, they will effectively become pockets 4 and 5 in the sequence, and pocket 3 will finish draining before moving on to pocket 4. However, if pocket 3 is also refilled to top off the partial amount, then it will become pocket 6, leaving old stock in the last pocket of the sequence. For this reason, it is important to refill only the totally empty pockets when the same medication is in two or more CUBIE pockets. Outdate tracking 1. Use the Outdate Tracking feature to manage expired medications during the refill process. 2. Teach all applicable pharmacy staff the expected standardized practice to manage expired medications and monitor compliance. 3. When the expiration date is displayed on the screen, compare the date on the screen to the date on the medications being refilled (Note: To make this easier for the refilling technician, write the expiration date on the label on the bag during the checking process). 4. If the date displayed on the screen is earlier than the date on the medications being placed in the system, no action is necessary place the medication in the pocket. 5. If the expiration date displayed on the screen is later than the date on the medications being placed in the system, change the date on the screen to match the expiration date of the medications being added. 6. During the refill process, check for outdates from the main menu. 7. If a medication has reached the outdate date, an icon will appear on the Pyxis MedStation system screen. 8. When the outdate button is touched, medications that are out of date will display on the screen. 9. Check the expiration date of the medication in each pocket and remove outdated stock. 10. Change the date on the screen to the next earliest expiration date of the product remaining in the pocket. 11. If this process is followed, the Outdate Medication report generated after the refill should be empty. 12. Make adjustments to Max and Min levels for outdated medications that required removal. 13. Verify that all outdated medications are removed by running the Outdated Medication report monthly. 14. Policy and procedures should address removing short dated compounded medications or opened multi-dose medications that have shortened expiration dates. Quarterly review process for good inventory management 1. Put all Pyxis MedStation systems on a 13-week rotating schedule, reviewing one unit or one nursing unit with multiple systems at a time. 2. Evaluate medications being refilled more than five times per month, moving these to larger pockets or multiple pockets where higher maximum levels are required. Pyxis Med Analytics: Optimization made easy with actionable information Provides our customers key metrics to help optimize your devices and track trends quickly. The stations can be tracked on a daily, monthly, quarterly and yearly basis. The key inventory metrics that are tracked focus on the following: Stock-out percentage Vend to refill ratio Number of pockets w/o removals for > 90 days Avg. remove outdates/station Number of meds with greater than 2 loads/unloads Avg. number of blind stock-outs/station CareFusion San Diego, CA carefusion.com 2011 CareFusion Corporation or one of its subsidiaries. All rights reserved. CUBIE, MedStation and Pyxis are trademarks or registered trademarks of CareFusion Corporation or one of its subsidiaries. DI2077-01 (0411/PDF)