Yanshan University Introduction The origin of Yanshan University can be traced back to the Harbin Institute of Technology (HIT) founded in 1920. In 1978, it was accredited as one of the eighty-eight national key institutions of higher learning. Starting in 1985, it began to relocate southward to the historic seaside city of Qinhuangdao in Hebei Province. The YSU campus covers an area of 4,000 mu (or 330 hectares) with a total construction area of nearly one million square meters. At present, the university has a faculty and staff of 3000, including 2,000 teachers, of which 339 are professors (including 146 doctoral advisors) and 453 are associate professors. The university has a student population of 39,000. YSU has 9 postdoctoral research stations, 10 disciplines of 48 sub disciplines conferring doctoral degrees, 24 disciplines of 139 sub disciplines conferring master degrees, 18 masters of engineering programs, one Master of Public Administration (MPA) program, one Master of Business Administration (MBA) program, as well as 61 undergraduate programs. With such a wide range of programs, YSU has become a multiversity with emphasis laid on engineering studies and importance attached to liberal arts, sciences, economics, management, law and education. YSU consists of twenty-one colleges. As a newly established college of Yanshan University, the College of International Exchange (CIE) is responsible for the management of joint Sinoforeign programs, the recruitment and training of Chinese students who are interested in studying abroad, the enrollment and daily administration of international students and their Chinese language and culture courses, the promotion of Chinese language and culture, as well as the administration of scholarship affairs. The college now enlists a team of more than ten full-time Chinese-as-aforeign-language teachers and about 20 part-time teachers, who take on their teaching and research with a combination of both the experience of seniority and the dynamics of youth. YSU runs five national key disciplines, four key disciplines of national defense, thirteen key provincial disciplines, and thirteen key provincial laboratories and engineering centers. YSU is known for its world-renowned achievements in the development of whole-set heavy machinery and equipment, the theory and technology of parallel robots, the technology of fluid transmission and electro-hydraulic servo-systems, the technology and equipment of precision plasticity figuration, technology of thermal treatment of big forging, the technology of mega amorphous bodies, metastable materials and technology, the theory and technology of industrial automation, etc. YSU has
won seventeen national scientific and technological awards in a row since 1996, including three firstclass China State Science and Technology Progress Awards, ten second-class Awards, two third-class Awards, one State Technology Invention Award, and one second-class National Natural Sciences Award. The university has undertaken more than 300 national research projects, including those funded by the 973 Programs, the 863 Programs, as well as the National Natural Sciences Foundation and the National Social Sciences Foundation. In 1999, YSU established its high-tech park in the Qinhuangdao Economic and Technological Development Zone. The park was officially established by the Chinese Ministry of Science and Technology and Ministry of Education as a national university science park in September 2003, thus becoming one of the 34 national university science parks of its kind. The university also attaches great importance to international academic exchange and collaboration, and has conducted joint study and research programs with institutions from the United Kingdom, the United States, Canada, Norway, Germany, France, Italy, Ireland, Japan, Korea, etc. Welcome to Yanshan University! Degree Programs General Scholar (1-2years) Bachelor s Degree (4 years) 1. Business Administration 2. Tourism Management 3. International Economics and Trade 4. Accounting 5. Industrial 6. Public Administration 7. Electronic Commerce 8. Mechanical Design and Manufacturing Automation 9. Forging and Control 10. Metallic Material 11. Inorganic Non-Metal Material(S) 12. Materials Physics 13. Macromolecular Materials and 14. Automation 15. Monitoring Technology and Equipment 16. Electrical and Automation 17. Biomedical 18. Computer Science and Technology 19. Electronic and Information 20. Telecommunication 21. Electronic Science and Technology 22. Instructional Technology 23. Optical Information and Technology 24. Geographical Information Systems 25. Software 26. Information Security 27. English 28. Japanese 29. Russian 30. French 31. German 32. Civil 33. Architecture(5 years) 34. Environmental Construction and Equipment 35. Mechanics 36. Electronic Information and Technology 37. Information and Computing Sciences 38. Applied Physics 39. Statistics 40. Chemical and Technology 41. Applied Chemistry 42. Process Equipment and Control 43. Biochemical 44. Environmental 45. Vehicle 46. Transportation 47. Thermal Energy and Power 48. Petroleum 49. Industrial Design (Art-Based) 50. Industrial Design (Science-Based) 51. Art Design
52. Sculpture(5 years) 53. Music Performance 54. Community sports 55. Law 56. Politics and Public Administration 57. International Politics 58. Administrative Management 59. Economics 60. Chinese Language and Literature 61. Radio and Television Journalism Master s Degree (2.5 years) 1. Regional Economics 2. Management Science and 3. Corporation Management 4. Tourism Management 5. Administrative Management 6. Accounting 7. Technology Economy and Management 8. MBA 9. Operations Research and Management Science 10. Social Medical and Health Service Management 11. Educational Economy and Management 12. Social Security 13. Land Resources Management 14. Finance 15. Finance and Banking 16. Industrial Economics 17. International Trade 18. Labour Economics 19. Statistics 20. Quantitative Economics 21. National Defense Economy 22. National Economics 23. Machinery Manufacturing and Automation 24. Electromechanical 25. Machine Theory and Design 26. Fluid Mechanics and 27. Materials Processing 28. Hydrodynamics 29. Heavy Equipment Design Theory and Its Digital Technology 30. Large Castings and Forgings Materials and Manufacturing Technology 31. Fluid Power Transmission and Control 32. Micro-electro-mechanical 33. Material Physics and Chemistry 34. Material Science 35. M e t a - s t a b l e M a t e r i a l s S c i e n c e a n d Technology 36. High Molecular Materials 37. Measuring Technology and Automation Devices 38. Systems 39. Pattern Recognition and Intelligent Systems 40. Control Theory and 41. Electric Power Systems and Automation 42. E l e c t r i c E l e c t r o n i c s a n d E l e c t r i c Transmission 43. Theory and New Technology of Electrical 44. Biomedical 45. Precision Instrument and Machinery 46. Measuring and Testing Technologies and Instruments 47. Biomedical Instrumentation and 48. Integrated Automation of Metallurgy 49. N e t w o r k C o n t r o l a n d I n f o r m a t i o n Management 50. Electrical Machines and Electrical Apparatus 51. High Voltage and Insulation Technology 52. Navigation, Guidance and Control 53. Detecting Measurement Technology and 54. Computer Systems and Construction 55. Computer Software and Theory 56. Applied Computation Technology 57. Electric Circuits and Systems 58. Communication Systems 59. Signal and Information Processing 60. Optical 61. Electromagnetic Fields and Micro-wave Technology 62. Physical Electronics 63. M i c r o e l e c t r o n i c s a n d S o l i d S t a t e Electronics 64. Optoelectronic Information Technology 65. Fiber Optics
66. English Language and Literature 67. Linguistics and Applied Linguistics in Foreign Languages 68. Russian Language and Literature 69. French Language and Literature 70. German language and literature 71. Japanese Language and Literature 72. Hindi language literature 73. SpanishLanguageandLiterature 74. Arabic Language and Literature 75. European Language and Literature 76. African Language and Literature 77. Mechanical Theory 78. Solid Mechanics 79. Mechanics 80. Structural 81. Geotechnical Engineer 82. Municipal 83. Heat Supply 84. Gas Supply 85. Ventilation engineering and air conditioning 86. Disaster prevention project and protection engineering 87. Bridge and Tunnel 88. Numerical Mathematics 89. Operational Research and Cybernetics 90. Probability Theory and Mathematical Statistics 91. Coagulum Physics 92. Optics 93. Theoretical Physics 94. Particle Physics and Nuclear Physics 95. Atomic and Molecular Physics 96. Plasma Physics 97. Acoustics 98. Radio Physics 99. Chemical Technology 100. Applied Chemistry 101. Chemical Processing Equipment 102. Environmental 103. Industrial Catalysis 104. Biochemical 105. Chemical 106. Vehicle 107. Oil-gas Field Development 108. Oil-gas Well 109. Vehicle Operation 110. Environmental Sciences 111. Thermophysics 112. Thermal Power 113. Dynamic mechanical and engineering 114. Refrigeration and Cryogenic 115. Artistic Design 116. Musicology 117. Art Theory 118. Fine Arts 119. Theater and Chinese Traditional Opera 120. Film Studies 121. Radio and television Art 122. Dance 123. Administrative Management 124. Logic 125. Marxist Theory 126. Ideological Education 127. Litigation Law 128. Chinese Language and Literature 129. Political Theory 130. Research on Marxism in China 131. MPA 132. Scientific Socialism and International 133. History of the Chinese Communist Party 134. International Politics 135. International Affairs 136. Diplomacy 137. Chinese and Foreign Political Institution 138. Chinese Philosophy 139. Foreign Philosophies 140. Ethics 141. Aesthetics 142. Religious Studies 143. Science and technology and philosophy Note: Majors with can be taught in English. (The minimum number of opening a master s class is 15.)
Doctoral Degree (4 years) 1. Management Science and 2. Operations Research and Management Science 3. Machinery Manufacturing and Automation 4. Electro-mechanical 5. Machine Theory and Design 6. Materials Processing 7. Fluid Power Transmission and Control 8. Micro-electro-mechanical 9. Heavy equipment design theory and its digital technology 10. Material Physics and Chemistry 11. Material Science 12. M e t a - s t a b l e M a t e r i a l s S c i e n c e a n d Technology 13. Technology of Thermal Treatment of Big Forging 14. Macromolecular Materials 15. Precision Instrument and Machinery 16. Measuring and Testing Technologies and Instruments 17. Control Theory and Control 18. Measuring Technology and Automation Devices 19. Electronics and Electric Transmission 20. Navigation, Guidance and Control 21. Pattern Recognition and Intelligent Control 22. Systems 23. Sensor Measurement Technology and 24. Biomedical Instrumentation and 25. Integrated Automation of Metallurgy 26. N e t w o r k C o n t r o l a n d I n f o r m a t i o n Management 27. Electrical motors and electrical 28. Power System and its Automation 29. High Voltage and Insulation Technology 30. Theory and New Technology of Electrical 31. Electrical Circuits and Systems 32. Optical 33. Applied Computation Technology 34. Optoelectronic Information Technology 35. Fiber Optics 36. Physical Electronics 37. Microelectronics and Solid State Electronics 38. Electromagnetic Field and Microwave Technology 39. Computer structure system 40. Computer Software and Theory 41. Mechanics 42. Coagulum Physics 43. Applied Chemistry 44. Chemical 45. Chemical Technology 46. Biochemical 47. Industrial Catalysis 48. Vehicle Note: Majors with can be taught in English. (The minimum number of opening a doctoral class is 3.) Fees For Self-financed International Students 1. Application Fees: For Language Program: RMB 400; Bachelor s Degree: RMB 600; Master s Degree/ Doctoral Degree: RMB 800. 2. Tuition: 1) For Language Program: Four-week Program: RMB 2500/person; One-semester Program: RMB 7000/semester; One-year Program: RMB 14000/ academic year; 2) Bachelor s Degree: RMB 15700/academic year; 3) Master s Degree: RMB 19800/academic year (taught in Chinese); RMB 24800/academic year (taught in English); 4) Doctoral Degree: RMB 23100/academic year (taught in Chinese); RMB 28100/academic year (taught in English); 3. Material fee: It refers to the actual price of the textbooks. 4. Insurance: 6 months RMB 300; One year: RMB 600.
5. Accommodation: Single room in a suite RMB 50/day/room; Double room in a suite RMB 25/ person/day. Each room is equipped with TV, central air conditioning, shared telephone line, shower, toilet, and kitchen (with refrigerator, microwave oven, gas facilities etc.), washing machine, internet access. Single room RMB 60/day/room, Double room RMB 30/day/ person, Each room is equipped with TV, central air conditioning, telephone, shower, toilet, refrigerator, shared washroom, internet access. The fees for cable TV, telephone and internet are paid by the occupant. Room deposit RMB 1000/person.(Refundable upon check-out.). Guidance: There are four student dinning halls as well as several cafeterias and restaurants on campus. In the dinning halls, there are varies kind of local food and foreign cuisines, and students may also dine at Yanshan Hotel restaurant and Yi Yuan cafeteria which provide clean and comfortable environment. Expenses each day are about 20 to 40 RMB per person each day. Yanshan University is located at 438 west Hebei Avenue, Qinhuangdao. It is very convenient to take bus No. 34, No. 32 and No. 6 from Yanshan University to the downtown area which has supermarkets such as Tesco, shopping centers, department stores, restaurants, and places of entertainment. English-taught Programs YSU runs five national key disciplines, four key disciplines of national defense, thirteen key provincial disciplines, and thirteen key provincial laboratories and engineering centers. YSU is known for its world-renowned achievements in the development of whole-set heavy machinery and equipment, the theory and technology of parallel robots, the technology of fluid transmission and electro-hydraulic servo-systems, the technology and equipment of precision plasticity figuration, technology of thermal treatment of big forging, the technology of mega amorphous bodies, metastable materials and technology, the theory and technology of industrial automation, etc. Master s Programs (2.5 years) 1. Machinery manufacturing and automation: national key 2. electromechanical engineering: national key 3. Machine theory and design: national key 4. Fluid power transmission and control: first discipline is the national 5. Micro-electro-mechanical engineering: first discipline is the national 6. Materials processing engineering: first discipline is the national 7. Design theory of whole-set heavy machinery and equipment and digitizing technique; 8. Fluid mechanics and engineering: national key 9. Material physics and chemistry: national key 10. Material science: national key discipline 11. High molecular materials: national key 12. Technology of thermal treatment big forging: national key 13. Metastable materials science and technology: national key 14. Applied computation technology: provincial key 15. Control theory and engineering: provincial key discipline postdoctoral research station; 16. Management science and engineering: postdoctoral research station;
Postgraduates Training Programs of Oversea Students Majored in Mechanical Curriculum Arrangements: Postgraduates for Master s Degree of oversea students majored in Mechanical should obtain 16 credits, in which 11.5 credits are from the Degree Courses (Among the credits, 7.5 credits are from public courses, 2 credits are from compulsory courses of basic theory, and 2 credits can be got from the specialty skill courses), 3.5 credits are from nondegree courses (It can be obtained from optional courses) and 1 credit is from other compulsory activities. Degree Courses: Survey of China, Science and Technology in Chinese, Numerical Analysis, Modern control theory, Robotics, Modern plastic processing theory. Non-degree Courses: Internetize Manufacturing, Mechanism Theory of Parallel Robotic Manipulator, Modern Fluid Dynamics control Technology, Computational Fluid Dynamics, Modern Optimum Design of Machinery, Special Plastic Processing, CAE Technology of Plastic Processing. Compulsory Activities: Academic Activities. Doctoral Programs (4 years) 1. Machinery manufacturing and automation: national key 2. electromechanical engineering: national key 3. Machine theory and design: national key 4. Fluid power transmission and control: first discipline is the national 5. Materials processing engineering: first discipline is the national 6. Material physics and chemistry: national key 7. Material science: national key discipline 8. Metastable materials science and technology: national key 9. Technology of thermal treatment big forging: national key 10. High molecular materials: national key 11. Applied computation technology: provincial key 12. Control theory and engineering: provincial key discipline postdoctoral research station; 13. Management science and engineering: postdoctoral research station; Doctoral postgraduates Training Programs of Oversea Students Majored in Mechanical Curriculum Arrangements: Doctoral postgraduates of oversea students majored in Mechanical should obtain 9.5 credits, in which 7 credits are from the degree courses, 1.5 credits are from nondegree courses (It can be obtained from optional courses) and 1 credit is from other compulsory activities. Degree Courses: Survey of China, Science and Technology in Chinese, Modern Mechanics. Non-degree Courses: Special Topics on Modern FTPC, Robots and Manipulators, Mathematical Introduction to Robot Operation, Sheet Metal Forming Theory, Manufacturing Tribology, Advanced Mechanical Design Methods. Compulsory Activities: Academic Activities. Contacts Overseas Students Office, College of International Exchange, Yanshan University Add: 438 W. Hebei Avenue, Qinhuangdao, Hebei Province, P.R. China 066004 Tel: +86-335-8047570, +86-335-8053537 Fax: +86-335-8061449 Email: goldenbay123@hotmail.com or study@ ysu.edu.cn CIE: http://gjhzc.ysu.edu.cn YSU: www.ysu.edu.cn