Trainer Preparation Guide for Course 10174A: Configuring and Administering Microsoft SharePoint 2010 1 Trainer Preparation Guide for Course 10174A: Configuring and Administering Microsoft SharePoint 2010
Trainer Preparation Guide for Course 10174A: Configuring and Administering Microsoft SharePoint 2010 2 Required Materials to Teach This Course To teach this course, you need the following materials: Course Handbook Course Companion CD Microsoft Office PowerPoint files Microsoft Hyper-V Server Classroom Setup Guide Course virtual machines Important: It is recommended that you use Office PowerPoint 2002 or later to display the slides for this course. If you use PowerPoint Viewer or an earlier version of Office PowerPoint, all the features of the slides might not display correctly. Note: You can print the instructor notes section of the Office PowerPoint slide decks in Notes view, if you would like to have the instructor notes for reference while conducting class.
Trainer Preparation Guide for Course 10174A: Configuring and Administering Microsoft SharePoint 2010 3 Prerequisite Knowledge to Teach This Course To present this course, you must have: Understanding of Windows Server 2008 and supporting technologies, such as Internet Information Services Experience deploying and configuring Windows Server 2008 and SQL Server Technologies Experience deploying SharePoint 2007 Technologies Understanding of the different ways to manage SharePoint Server 2010 Understanding the difference between SharePoint Foundation 2010 and SharePoint Server 2010 Understanding of SQL Server Technologies Understanding of Disaster Recovery planning and procedures Clear understanding of the importance of Governance terminology, SLA and OLA. Reviewed the different implementation guides for SharePoint 2010 Familiarity with SharePoint 2010 information on TechNet and MSDN. Preparation Tasks Complete the following tasks to prepare for this course. Courses or Workshops It is highly recommended that you audit the following courses or workshops: Clinic 10173A What s new for IT Professionals in Microsoft SharePoint 2010 Clinic 10176A What s new for IT Professionals in Microsoft SharePoint 2010
Trainer Preparation Guide for Course 10174A: Configuring and Administering Microsoft SharePoint 2010 4 Exams To identify your technical proficiency with the content of this course, it is highly recommended that you pass the following exams: MCTS: Microsoft SharePoint Server 2010, Configuring Technical Preparation Activities It is highly recommended that you complete the following technical preparation activities: Change any generic references to be specific to this learning product. Add any activities that you feel are essential. Remove any items that are not applicable. Read the additional readings and references included on the Course CD. List the recommended reading here, using a bulleted list. If you do so, replace the period at the end of the sentence with a colon to introduce the list Practice using the Microsoft product(s) and tools associated with this course. List the recommended products and tools here, using a bulleted list. If you do not use a list, replace the colon at the end of the sentence with a period. Practice setting up the classroom by following the instructions in Microsoft Virtual Machine/Server Classroom Setup Guide or the Microsoft Virtual Machine/Server Build Guide. Review the 10174A error log, which is available in the Microsoft Download Center.
Trainer Preparation Guide for Course 10174A: Configuring and Administering Microsoft SharePoint 2010 5 Instructional Preparation Activities It is highly recommended that you complete the following instructional preparation activities: Preparation activities Read the Curriculum Design Guide for the broader context of the curriculum of which this course is a part. The Curriculum Design Guide is located on the MCT Member Site (https://mcp.microsoft.com/mct/resources/resourcecenter.mspx) Read the About This Course at the beginning of the Course handbook for the Course. Walk through the Introduction slide deck for the Course. Walk through each module presentation slide deck, and read the corresponding Instructor Notes for the walkthroughs (located in the notes view of the presentation slide deck) for the module. Familiarize yourself with the Course handbook and the Course CD. Make note of when to direct students' attention to the Course CD for further learning support. Practice presenting each module: Identify the key points and must-know information for each topic. Perform each walkthrough and hands-on lab. Anticipate the questions that students might have. Identify examples, analogies, impromptu demonstrations, and additional delivery tips that will help to clarify module content and provide a more meaningful learning experience for your specific audience. Note any problems that you might encounter during a walkthrough or a lab exercise, and determine a course of action for how you will resolve the problems in the classroom. To access the lab answer keys, click the link provided at the bottom of each lab exercise page on the Course Companion CD. Read the white paper "Making Small Group Activities Work" located on the MCT Member Site (https://mcp.microsoft.com/mct/resources/resourcecenter.mspx), which provides guidance on how to conduct small group activities in the classroom. Enhance your instructor notes. Consult the MCT newsgroup for additional tips and strategies posted by your fellow MCTs for teaching the course. Review the updated information about the Microsoft Certification Program on the Microsoft Learning Certifications Web site.
Trainer Preparation Guide for Course 10174A: Configuring and Administering Microsoft SharePoint 2010 6 Instructor Computer Setup Set up the instructor computer by following the setup instructions in the Microsoft Hyper-V Server Classroom Setup Guide document. This document provides hardware requirements for the instructor computer, and detailed setup instructions.
Trainer Preparation Guide for Course 10174A: Configuring and Administering Microsoft SharePoint 2010 7 Course Timing The following schedule is an estimate of the course timing. Your timing might vary. Every student might not finish every lab. Use your judgment to set a reasonable time to move on to the next module. Day 1 Start End Module 9:00 9:30 Introduction 9.30 10.30 Module 1: Introducing SharePoint 2010 10.30 10.45 Break 10.45 11.45 Lab: Install SharePoint 2010 11.45 12.45 Lunch 12.45 1.45 Module 2: Creating a SharePoint 2010 Intranet 1:45 2:45 Lab: Creating a SharePoint 2010 Intranet 2.45 3.00 Break 3:00 4:30 Module 3: Administering and Automating SharePoint 4:30 5:30 Lab A: Automate SharePoint with Windows PowerShell Lab B: Administer SharePoint with Stsadm
Trainer Preparation Guide for Course 10174A: Configuring and Administering Microsoft SharePoint 2010 8 Day 2 Start End Module 8:30 9:00 Day 1 Review 9:00 9:30 Module 4: Configuring Content Management 9:30 10:00 Lab A: Configuring List Throttling and Remote BLOB Storage 10:00 10:45 Module 4: Configuring Content Management (Continued) 10:45 11:15 Lab B: Configuring Managed Metadata 11:15 12:15 Lunch 12:15 1:15 Module 5: Configuring Authentication 1:15 2:15 Lab A: Configuring Custom Authentication Lab B: Configuring Secure Store 2:15 2:30 Break 2:30 3:30 Module 6: Securing Content 3:30 4:30 Lab: Configuring Security for SharePoint Content
Trainer Preparation Guide for Course 10174A: Configuring and Administering Microsoft SharePoint 2010 9 Day 3 Start End Module 8:30 9:00 Day 2 review 9:00 10:15 Module 7: Managing SharePoint Customizations 10:15 10:30 Break 10:30 11:45 Lab A: Administering Features and Solutions Lab B: Administering Sandboxed Solutions Lab C: Administering the Developer Dashboard 11:45 12:45 Lunch 12:45 2:15 Module 8: Configuring and Securing SharePoint Services and Service Applications 2:15 3:30 Lab A: Administering SharePoint Services Lab B: Configuring Application Security 3:30 3:45 Break 3:45 4:45 Module 9: User Profile and Social Networking
Trainer Preparation Guide for Course 10174A: Configuring and Administering Microsoft SharePoint 2010 10 Day 4 Start End Module 9:00 9:30 Day 3 review 9:30 10:30 Lab A: Configuring User Profiles Lab B: Administering My Sites 10:30 10:45 Break 10:45 11:45 Module 10: Administering and Configuring SharePoint Search 11:45 12:30 Lunch 12:30 2:00 Lab A: Configuring Search Lab B: Tuning SharePoint Search 2:00 3:00 Module 11: Managing SharePoint Services and Applications 3:00 3:15 Break 3:15 4:15 Lab: Implementing Office Web Apps 4:15 5:15 Module 12: Installing and Upgrading to SharePoint 2010
Trainer Preparation Guide for Course 10174A: Configuring and Administering Microsoft SharePoint 2010 11 Day 5 Start End Module 9:00 9:30 Module 12: Installing and Upgrading to SharePoint 2010 (continued) 9:30 11:00 Lab A: Preparing SharePoint 2007 for Upgrade to SharePoint 2010 Lab B: Upgrading SharePoint 2007 to SharePoint 2010 11:00 11:10 Break 11:10 12:10 Module 13: Implementing Business Continuity 12:00 1:00 Lunch 1:00 2:00 Lab A: Implementing a Backup Strategy Lab B: Implementing a Restore Strategy 2:00 3:00 Module 14: Monitoring and Optimizing SharePoint Performance 3:00 3:15 Break 3:15 4:15 Lab A: Configuring SharePoint Monitoring Lab B: Analyzing SharePoint Health Lab C: Reporting SharePoint Usage