Kirkwood Continuing Education Environmental, Industrial Health and Safety Training FALL 2015 www.kirkwood.edu/ce
Welcome to Kirkwood Continuing Education Environmental, Industrial Health and Safety Training Kirkwood Community College s Environmental, Industrial Health and Safety Training classes are designed to meet the industrial health and safety training needs of business and industry with comprehensive and up-to-date training curriculum. Our programs promote worker protection and the maintenance of a clean and safe environment through high quality, standards-based education and training. An experienced team of authorized instructors present up-to-date federal and state safety and health regulations. 1 2 3 3 7 CONTENTS FALL 2015 Hazardous Materials Confined Space DOT Training OSHA Education Center OSHA Compliance 8 9 Area Hotels/Campus Map Registration Information KIRKWOOD CLASSROOM SITES Kirkwood Continuing Education Training Center 101 50th Ave. SW Cedar Rapids, IA 319-398-5678 Kirkwood Community College declares and affirms to its students, employees and to the public that it does not discriminate on the basis of sex, race, color, creed, religion, national origin, age, physical or mental ability, sexual orientation, gender, gender identity, physical attributes, veteran status, genetic information, socioeconomic status, and actual or potential parental, family or marital status in its educational programs, activities, admission procedures or employment practices. The College affirms its commitment to comply with all applicable federal and state laws, regulations and orders. If you have questions or complaints related to compliance with this policy, please contact Michael Roberts, Executive Director of Human Resources at Kirkwood Community College, 313 Kirkwood Hall, 6301 Kirkwood Blvd., SW, Cedar Rapids, IA 52404, or by phone to (319) 398-5572, or email to michael.roberts@kirkwood.edu; or Vice President, Student Services, Jon Buse, 115 Iowa Hall, at (319) 398-5584, or email to jon.buse@kirkwood.edu; or Vice President, Academic Affairs, Bill Lamb, 100 Iowa Hall, at (319) 398-5509, or email to bill.lamb@kirkwood.edu; or the Director of the Office for Civil Rights, U.S. Department of Education, Citigroup Center, 500 W. Madison, Suite 1475, Chicago, IL 60661, phone number (312) 730-1560, fax (312) 730-1576.
Continuing Education Kirkwood Community College Hazardous Materials Technician Level Emergency and Disaster Response Refresher This course is the annual refresher course for the Technician Level Emergency and Disaster Response to Chemical Release 24 hour course. The course addresses the annual refresher requirements for operations and technician level emergency responses, 29 CFR 1910.120(q) (6)(ii) and (iii). There will be coverage on initial action planning, level appropriate PPE will be donned, and decontamination lines will be set-up and operated. Hands-on exercises will be conducted utilizing PPE and specialized equipment. ETHM-1006 / 1 session / $135 >63917 Wed 8am-5pm Jul 15 >63918 Thu 8am-5pm Sep 17 Kirkwood Continuing Education Training Center 1102 >63919 Fri 8am-5pm Nov 20 >72923 Fri 8am-5pm Jan 15 HAZWOPER 16-hour Hands-on Training for Online 40-hours There are two days of face-to-face training to complete the 40 hours for Hazardous Waste Site Worker (HAZWOPER) or as a stand-alone course to enhance your skills. Topics include exercises on PPE, container recognition, site characterization, site entry and decontamination operations. ETHM-1013 / 2 sessions / $199 >63926 Wed/Thu 8am-5pm Jul 29-Jul 30 >63927 Mon/Tue 8am-5pm Oct 12-Oct 13 Technician Level Emergency and Disaster Response to Chemical Releases 24-hours This course provides training for industrial hazmat and spill response teams, and industrial emergency response personnel as outlined in OSHA 29 CFR 1910.120(q). Hazards of a release, roles of hazmat team members, hazard recognition, use of personal protection equipment, control operations, incident command, decontamination and termination will be covered. Hands-on exercises in full PPE will be conducted. ETHM-1046 / 3 sessions / $350 >63938 Tue/Wed/Thu 8am-5pm Jul 21-Jul 23 Kirkwood Continuing Education Training Center 1102 >63939 Mon/Tue/Wed 8am-5pm Sep 14-Sep 16 >63941 Mon/Tue/Wed 8am-5pm Nov 9-Nov 11 HAZWOPER Refresher (online) This Internet-based course provides eight hours of interactive training online for the annual refresher to the 40-hour Hazardous Waste Site Worker course (29 CFR 1910.120). This course fulfills the requirement of OSHA/EPA. ETHM-2300 / $145 >71305 Online anytime HAZWOPER Refresher for Supervisors 8-hours (online) This Internet-based course provides eight hours of interactive training online for the annual refresher to the 40-hour Hazardous Waste Site Worker course (29 CFR 1910.120). This course places greater emphasis on supervisory functions and fulfills the OSHA/EPA requirements for supervisors. ETHM-2300 / $145 >71306 Online anytime HAZWOPER Training 24-hour Online Instruction for 40-hour Waste Site Worker (online) This course is the online portion of the 40- hour class using the nationally recognized curriculum with self-paced, open entry, open exit for waste site workers that meets all the requirements of 29 CFR 1910.120, OSHA s Hazardous Waste Site Worker and Emergency Response Standard. The course consists of an online text, interactive exercises, web links, self-grading quizzes, and final exam. There are two days of face-to-face training to complete the 40 hours for HAZWOPER Certification, or as a stand-alone course to enhance your skills. Topics include exercises on PPE, regulations, site characterization, confined space, decon, and more. ETHM-2300 / $275 >71307 Online anytime Hazardous Waste Site Worker (HAZWOPER) Refresher 8-hours This course is the annual refresher to the 40-hours Hazardous Waste Site Worker course (29 CFR 1910.12). This class fulfills the requirement for both workers and supervisors. ETHM-1015 / 1 session / $135 >63930 Fri 8am-5pm Aug 14 A great experience. The real life scenarios really opened my eyes to the potential for many hazards. Justin Jensen Environmental, Industrial Health and Safety Training Register online at www.kirkwood.edu/ce 1
Confined Space Confined Space Rescue Team Training 40-hours This 40-hour course is designed for employees who are responsible for performing confined space entries on the job. This program will train the employee so they may be part of a confined space rescue team, and is based on standards established by OSHA 29 CFR 1910.146. Students will perform victim retrieval in simulated and actual confined spaces. This course includes simple and compound rope hauling systems, as well as advanced confinedspace entry and extrication techniques. Emphasis is placed on rope rigging, hazard identification, and hazard mitigation skills. ETHM-1001 / 5 sessions / $575 >63890 Mon-Fri 8am-5pm Jul 13-Jul 17 >63892 Mon-Fri 8am-5pm Nov 30-Dec 4 >72922 Mon-Fri 8am-5pm Jan 25-Jan 29 Custom Training Need training for your company? We can customize any of these courses to best meet your organization s specific needs. Training can be scheduled on-site at your workplace or at one of our facilities. Kirkwood Training & Outreach Services For more information, contact us at 319-398-5623 or visit www.kirkwood.edu/ktos. 2 Additional questions? Call our phone-in registration at 319-398-1022 / 1-800-332-8833.
Continuing Education Kirkwood Community College DOT Training OSHA Education Center DOT Required Hazardous Materials Training (Job Specific) This course is offered for shippers and handlers of hazardous materials. Areas covered include general awareness/familiarization, functionspecific safety, and security awareness training described under 49 CFR 172.704. Tuition includes a textbook and 49 CFR manual. ETHM-1003 / 1 session / $175 >63895 Tue 8am-5pm Jul 21 >63897 Mon 8am-5pm Sep 28 >63898 Fri 8am-5pm Dec 11 DOT Required Hazardous Materials Training (Job Specific Refresher) This course serves as the required training and refresher for shippers and handlers of hazardous materials. Topics include using a hazardous materials table, preparation of shipping papers, and selection and preparation of hazmat packages for shippers and handlers. Participants are encouraged to bring questions and problems for class discussion. This course needs to be completed every three years. ETHM-1004 / 1 session / $99 >63910 Thu 8am-12pm Jul 9 >63912 Fri 8am-12pm Sep 25 Kirkwood Continuing Education Training Center 1102 >63913 Fri 8am-12pm Nov 6 DOT Hazardous Materials Transportation (online) This course is designed to familiarize you with the DOT hazard communication system related to safety and security issues. It will help you understand the labels, placards, shipping papers, and markings associated with the transportation of hazardous material. You will learn how to read the Hazardous Material Table and the 2008 Emergency Response Guidebook. The course includes labeling exercises, form completions and a self-test. Students can access the DOT Regulations and the CFR through online links. This course can be used for the DOT required three year refresher training. ETHM-2300 / $145 >71303 Online anytime 500 Trainer Course in OSHA Standards for Construction This course is designed for personnel in the private sector interested in teaching the 10- and 30-hour construction safety and health outreach program to their employees and other interested groups. Special emphasis is placed on topics that are required in the 10- and 30- hour programs as well as on those that are the most hazardous, using OSHA standards as a guide. Participants are briefed on effective instructional approaches and the effective use of visual aids and handouts. This course allows the student to become a trainer in the outreach program, to conduct both a 10- and 30-hour construction safety and health course, and to issue cards to participants verifying course completion. Prerequisites: OSHA 510 course and five years of construction safety experience, a college degree in occupational safety and health, and a Certified Safety Professional (CSP), or Certified Industrial Hygienist (CIH) designation. The applicable training area may be substituted for two years of experience. NOTE: Students who wish to participate as authorized trainers in the outreach program must successfully pass a written exam, given at the end of the course, and an oral presentation. ETOS-3000 / 4 sessions / $749 >63818 Tue/Wed/Thu/Fri 8am-5pm Sep 15-Sep 18 Kirkwood Continuing Education Training Center 1102 It was a great day. Trainers were relatable and answered the questions that pertained to my job. Miranda McDowell Environmental, Industrial Health and Safety Training Register online at www.kirkwood.edu/ce 3
501 Trainer Course in OSHA Standards for General Industry This course is designed for personnel in the private sector interested in teaching the 10- and 30-hour general industry safety and health outreach program to their employees and other interested groups. Special emphasis is placed on topics that are required in the 10- and 30- hour programs as well as on those that are the most hazardous, using OSHA standards as a guide. Participants are briefed on effective instructional approaches and the effective use of visual aids and handouts. This course allows the student to become a trainer in the outreach program, to conduct both a 10- and 30-hour general industry safety and health course, and to issue cards to participants verifying course completion. Prerequisites: OSHA 511 course and five years of general industry safety experience, a college degree in occupational safety and health, and a Certified Safety Professional (CSP), or Certified Industrial Hygienist (CIH) designation. The applicable training area may be substituted for two years of experience. NOTE: Students who wish to participate as authorized trainers in the outreach program must successfully pass a written exam, given at the end of the course, and an oral presentation. ETOS-3001 / 4 sessions / $749 >63821 Tue/Wed/Thu/Fri 8am-5pm Nov 10-Nov 13 502 Update for Construction Industry Outreach Trainers This course is designed for personnel in the private sector who have completed OSHA 500 Trainer Course in OSHA Standards for the Construction Industry and who are active trainers in the outreach program. It provides an update on such topics as OSHA construction standards, policies and regulations. Prerequisites: OSHA 500 course. NOTE: Outreach trainers are required to attend this course once every four years to maintain their trainer status. Students must bring their current trainer s card for validation. ETOS-3002 / 3 sessions / $599 >63832 Wed/Thu/Fri 8am-5pm Oct 21-Oct 23 503 Update for OSHA Trainers in General Industry This course is designed for private sector personnel who have completed OSHA 501 Trainer Course in OSHA Standards for General Industry and who are active trainers in the outreach program. It provides an update on OSHA general industry standards and OSHA policies. Prerequisites: OSHA 501 course. NOTE: Outreach trainers are required to attend this course once every four years to maintain their trainer status. Students must bring their current trainer s card for validation. ETOS-3003 / 3 sessions / $599 >63837 Wed/Thu/Fri 8am-5pm Nov 4-Nov 6 Excellent instructors and a relaxing teaching environment. Jo-Dee Schomaker 510 Occupational Safety and Health Standards for the Construction Industry This course is for private sector personnel and covers OSHA policies, procedures, and standards, as well as construction safety and health principles. Topics include scope and application of the OSHA construction standards. Special emphasis is placed on those areas that are the most hazardous, using OSHA standards as a guide. Current 29 CFR 1926 will be provided. ETOS-3004 / 4 sessions / $749 >63840 Tue/Wed/Thu/Fri 8am-5pm Jul 7-Jul 10 >73577 Tue/Wed/Thu/Fri 8am-5pm Oct 6-Oct 9 >63841 Tue/Wed/Thu/Fri 8am-5pm Jan 12-Jan 15 511 Occupational Safety and Health Standards for General Industry This course is an introduction to OSHA policies, procedures and standards, as well as general industry safety and health principles. The scope and application of the OSHA General Industry Standards is discussed. Special emphasis is placed on those areas that are most hazardous, along with recommended abatement techniques. Current 29 CFR 1910 will be provided. ETOS-3005 / 4 sessions / $749 >63843 Tue/Wed/Thu/Fri 8am-5pm Sep 8-Sep 11 >72924 Tue/Wed/Thu/Fri 8am-5pm Jan 26-Jan 29 7105 Evacuation and Emergency Planning This course is an overview of requirements and considerations for developing an effective emergency action plan and evacuation plan for small business. The goal of this course is to increase the participants knowledge of emergency planning and the features of good evacuation floor plans. ETOS-3006 / 1 session / $150 >63846 Tue 8am-12pm Aug 11 7300 Understanding OSHA Permit- Required CSP This one-day course covers OSHA s stringent guidelines concerning confined space areas. OSHA s Standard 1910.146 requires employers to develop and implement a comprehensive program to minimize risk when working in confined spaces. Topics include understanding the standard, hazard identification and control, designing and implementing a permit program, and discussion of emergency procedures. ETOS-5022 / 1 session / $225 >63866 Fri 8am-5pm Sep 25 4 Additional questions? Call our phone-in registration at 319-398-1022 / 1-800-332-8833.
Continuing Education Kirkwood Community College 7500 Introduction to Safety and Health Management This one-day seminar focuses on an effective implementation of a company s safety and health management system. This workshop addresses the four core elements of an effective safety and health system and central issues that are critical to each element s proper management. ETOS-5025 / 1 session / $225 >63870 Thu 8am-5pm Oct 15 7505 Introduction to Accident Investigation This is an introduction to basic accident investigation procedures that describe accident analysis techniques. The goal of the course is to help employees gain the basic skills necessary to conduct an effective accident investigation at their workplace. ETOS-5026 / 1 session / $225 >63880 Tue 8am-5pm Oct 13 7845 Record Keeping Rule Seminar This course is designed to assist employers in identifying and fulfilling their responsibilities for posting certain records, maintaining records of illness and injuries, and reporting specific cases to OSHA. Look at what makes a reportable case and the forms you need to be aware of. Several practice sessions are included. ETOS-5028 / 1 session / $125 >63886 Tue 8am-12pm Jul 28 >63887 Fri 8am-12pm Oct 16 2016 East Central Iowa Safet y and Health Conference The Kirkwood Center, Cedar Rapids, Iowa February 25, 2016 Save the Date One-day conference dedicated to meeting the safety and health training needs of business and industry. Networking opportunities with peers across eastern Iowa. Vendor expo featuring the latest products and services in health and safety. Environmental, Industrial Health and Safety Training Register online at www.kirkwood.edu/ce 5
6 Additional questions? Call our phone-in registration at 319-398-1022 / 1-800-332-8833.
Continuing Education Kirkwood Community College OSHA Compliance Introduction to OSHA This course is for those with little or no knowledge of OSHA regulations but who need this information for their job responsibilities. Participants will go through the Code of Federal Regulations (29 CFR 1910) and explanations of the main standards and their application will be given. ETOS-3012 / 1 session / $75 >63848 Mon 8am-12pm Jul 13 >63849 Mon 8am-12pm Nov 16 OSHA General Industry Outreach Training 10-hours This course covers general industry safety and health principles, OSHA policies and procedures, and general industry standards. Special emphasis is placed on the most hazardous areas using OSHA standards as a guide. Participants who successfully complete the course will receive a card from OSHA certifying completion of the course. ETOS-3013 / 2 sessions / $180 >63852 Thu/Fri 8am-3:30pm Jul 16-Jul 17 >63853 Mon/Tue 8am-3:30pm Sep 21-Sep 22 >73578 Mon/Tue 8am-3:30pm Nov 2-Nov 3 >72926 Wed/Thu 8am-3:30pm Jan 20-Jan 21 OSHA Construction Industry Outreach Training 10-hours This course covers construction safety and health principles, OSHA policies and procedures, and construction industry standards. Special emphasis is placed on the most hazardous areas using OSHA standards as a guide. Participants who successfully complete the course will receive a card from OSHA certifying completion of the course. ETOS-3014 / 2 sessions / $180 >63860 Thu/Fri 8am-3:30pm Jul 23-Jul 24 >63859 Wed/Thu 8am-3:30pm Sep 23-Sep 24 >63861 Wed/Thu 8am-3:30pm Nov 18-Nov 19 OSHA General Industry Outreach Training 30-hours This course covers general industry safety and health principles, OSHA policies and procedures, and general industry standards. Special emphasis is placed on the most hazardous areas using OSHA standards as a guide. This course is intended for those having supervision safety responsibility. Participants who successfully complete the course will receive a card from OSHA certifying completion of the course. ETOS-3016 / 4 sessions / $495 >63862 Fri 8am-5pm Jul 10-Jul 31 I really enjoyed the class. Learning hazmat was interesting. Nick Scott Power Industrial Forklift Operations This class includes a classroom presentation, hands-on training and testing in various types of lifts, power lifts, lift-truck operations and inspection of lift trucks. Participants receive certification meeting OSHA requirements upon successful completion. Participants must be 18 years old to take this course. CTTK-1600 / 1 session / $199 >59675 Sat 8am-2pm Jul 18 >59676 Sat 8am-2pm Aug 15 >65272 Sat 8am-2pm Sep 19 Kirkwood Continuing Education Training Center 1234 >65273 Sat 8am-2pm Oct 17 Kirkwood Continuing Education Training Center 1234 >65274 Sat 8am-2pm Nov 14 Kirkwood Continuing Education Training Center 1234 >72927 Fri 8am-2pm Jan 22 Forklift Train the Trainer Course This course was developed for the experienced forklift operator who has a desire or need to train others in forklift operations. Curriculum was developed using OSHA 1910.178. This six hour course will instruct prospective trainers on best teaching practices and classroom management. The instructor will provide a combination of teaching techniques, including PowerPoint lecture, in-house developed video presentation, group discussion on specific safety issues, and hands-on evaluations. Trainers will receive a trainer s manual providing guidance on conducting training, videos for visualizing training, PowerPoint presentations highlighting key areas of the course, skills evaluation performance worksheets for evaluating students, and written tests for measuring learning. Participants must be 18 years old to take this course. Prerequisites: Student must have prior forklift operator training and must bring their current operator s license to class. CTTK-1605 / 1 session / $449 >63827 Mon 8am-2pm Jul 20 >63828 Sat 8am-2pm Aug 8 >63829 Mon 8am-2pm Oct 19 >72921 Sat 8am-2pm Jan 23 Loved the hands-on training. Andrew Schultz Environmental, Industrial Health and Safety Training Register online at www.kirkwood.edu/ce 7
6th Street SW 6th Street SW Cedar Rapids Hotels The Hotel at Kirkwood Center 7725 Kirkwood Boulevard SW, Cedar Rapids 319-848-8700 Budget Inn 3100 16th Avenue SW, Cedar Rapids 319-363-8101 Clarion Hotel 525 33rd Avenue SW, Cedar Rapids 319-366-8671 Hampton Inn of Cedar Rapids 3265 6th Street SW, Cedar Rapids 319-364-8144 Holiday Inn Express Hotel & Suites 3320 Southgate Court SW, Cedar Rapids 319-399-5025 Hometown Inn & Suites 3315 Southgate Court SW, Cedar Rapids 319-362-9012 Motel 6 3325 Southgate Court SW, Cedar Rapids 319-366-7523 Quality Inn South 390 33rd Avenue SW, Cedar Rapids 319-363-7934 Red Roof Inn 3243 Southridge Drive SW, Cedar Rapids 319-364-2000 Super 8 Cedar Rapids 720 33rd Avenue SW, Cedar Rapids 319-362-6002 Directions to Campus from Interstate 380: 1. Take the Kirkwood/Highway 30 exit. 2. Take the Kirkwood Boulevard exit. 3. Go north on Kirkwood Boulevard approximately.6 miles. 4. The entrance is on the left. The Kirkwood Community College main campus covers 885 acres of Iowa countryside located near the intersection of I-380 and Highway 30 on the southern edge of Cedar Rapids. Maps 965 6th Street SW Exit 16 Exit 16A J St. SW 76th Ave. Bowling St. SW 50th Ave. SW 66th Ave. SW Kirkwood Blvd. SW Kirkwood Blvd. SW Kirkwood Continuing Education Training Center 101 50th Ave. SW Exit 253 Exit 254 254 A South 254 B North C Street SW C Street SW C Street SW Kirkwood Main Campus 6301 Kirkwood Blvd. SW N Ely Road SW Eastern Iowa Airport 965 Wright Brothers Blvd. SW 84 Exit 13 MK 5/13
Register Now! With four easy ways to register. MANY CLASSES HAVE LIMITED SEATING. REGISTER EARLY! Registration Information 319-398-1022 or 1-800-332-8833 Payment must be made at the time of registration. MasterCard, VISA or Discover Card accepted. Online: Log on to www.kirkwood.edu/ce. By Mail: 1. Fill out the enclosed enrollment form and credit card/debit card number, or enclose check. 2. For company billings, please include name, address, phone number and appropriate signature. Make Check Payable to Kirkwood Community College: 1. Pay the amount under tuition only. 2. Write name of person and class number on check. 3. Send to: Continuing Education, Kirkwood Community College P.O. Box 2068 Cedar Rapids, IA 52406 By Phone Tell Our Operators: 1. The class numbers from this catalog. 2. Your credit card/debit card number and expiration date. By Fax 319-398-7185 Fax enclosed enrollment form with credit card/debit card number or company billing information. Refunds: An automatic refund is made if Kirkwood cancels a class. To withdraw your registration before a class starts, please call 319-398-1022 or 1-800-332-8833. Refunds will be issued to students who drop the class at least one business day prior to the class start date. No refunds will be issued for classes dropped on or after the class start date. Kirkwood Community College Continuing Education is pleased to welcome learners of all ages. However, learners under the age of 17 wishing to enroll in non-youth courses should seek permission from the program director. Please phone 319-398-5529. Last First Middle Initial
Continuing Education Kirkwood Community College 6301 Kirkwood Blvd. SW Cedar Rapids, Iowa 52404 Non-Profit Organization U.S. Postage PAID Cedar Rapids, Iowa 52406 Permit No. 94 Hazardous Materials Confined Space DOT Training OSHA Education Center OSHA Compliance Find it all inside. 10 Additional questions? Call our phone-in registration at 319-398-1022 / 1-800-332-8833.