QUALITY ASSURANCE AND INTELLECTUAL PROPERTY RIGHTS



Similar documents
EQUIPMENT QUALIFICATION AND VALIDATION OF TABLET COMPRESSION MACHINE

ISSN (Print)

AN OVERVIEW OF PHARMACEUTICAL VALIDATION: QUALITY ASSURANCE VIEW POINT

Guidance on Qualification of existing facilities, systems, equipment and utilities

Working Party on Control of Medicines and Inspections. Final Version of Annex 15 to the EU Guide to Good Manufacturing Practice

Pharmaceutical Quality Management System: Current Concept

FOOD SAFETY MANAGEMENT SYSTEMS (FSMS): REQUIREMENTS FOR ANY ORGANISATION IN THE FOOD CHAIN (ISO 22000:2005)

GLP vs GMP vs GCP Dominique Pifat, Ph.D., MBA The Biologics Consulting Group

Program: Master s of Intellectual Property Law (Comprehensive) Syllabus

In 2001, ISPE issued Baseline Guide Volume

A NUSAGE-PharmEng Pharmaceutical and Biotechnology Training Program

A NUSAGE-PharmEng Pharmaceutical and Biotechnology Training Program

On-Site GMP Training GMP COMPLIANCE TECHNICAL

Why System Suitability Tests Are Not a Substitute for Analytical Instrument Qualification

QbD Considerations for Analytical Methods - FDA Perspective

INTERNATIONAL JOURNAL OF PHARMACEUTICAL RESEARCH AND BIO-SCIENCE

B i o s o l u t i o n s

OPERATIONAL STANDARD

Course Code CP204. Theory : 04. Practical : 01. Course Credit. Tutorial : 00. Credits : 05. Course Learning Outcomes

Application Of Quality Metrics In Determining Overall State Of Quality. & The Health Of Associated PQS FDA s Current Thinking

GUIDE TO GOOD MANUFACTURING PRACTICE FOR MEDICINAL PRODUCTS ANNEX 15 *

The purpose of this Supplier Quality Standard is to communicate the expectations and requirements of Baxter Healthcare Corporation to its suppliers.

Step-by-Step Analytical Methods Validation and Protocol in the Quality System Compliance Industry

Library Guide: Pharmaceutical GMPs

GMP Pharma BV. Netherlands

International GMP Requirements for Quality Control Laboratories and Recomendations for Implementation

Annex 2. WHO good manufacturing practices for pharmaceutical products: main principles 1

Pharmaceutical Process Validation: An Overview

Prospect of ICT Utilization at Core Clinical Research Hospitals

PHARMACEUTICAL OUTSOURCING:

Validation and Calibration. Definitions and Terminology

The Quality System for Drugs in Germany

1) Chemical Engg. PEOs & POs Programme Educational Objectives

Considerations When Validating Your Analyst Software Per GAMP 5

Quality Systems Appropriate for Extemporaneously Prepared Early Phase Clinical Trial Materials. Agenda Topics for Discussion

ICH Q7 GMP for Active Pharmaceutical Ingredients

Annex 4 Good Manufacturing Practices for pharmaceutical products: main principles

Process Validation: Practical Aspects of the New FDA Guidance

GAMP 5 and the Supplier Leveraging supplier advantage out of compliance

A STUDY ON WORKING CAPITAL MANAGEMENT OF PHARMACEUTICAL INDUSTRY IN INDIA

Medical Product Development Certificate Program

Computer System Validation - It s More Than Just Testing

GUJARAT TECHNOLOGICAL UNIVERSITY. Syllabus for Master in Pharmaceutical Management (MPM) (Five year integrated dual degree course) Sem-VII

White paper: FDA Guidance for Industry Update Process Validation

LabChip GX/GXII with LabChip GxP Software

MHRA GMP Data Integrity Definitions and Guidance for Industry March 2015

AICTE Guidelines for starting. Dual Degree course in Management

FDA Guidance for Industry Update - Process Validation

Annex 7 Guidelines for the preparation of a contract research organization master file

GUIDELINES FOR THE VALIDATION OF ANALYTICAL METHODS FOR ACTIVE CONSTITUENT, AGRICULTURAL AND VETERINARY CHEMICAL PRODUCTS.

Integrating Good Manufacturing Practices During the Transition from Clinical Trials to Commercial Manufacturing

Knowledge Management policy for Health - Service, Education and Research

LIBRARY GUIDE. Online Courses. March 2012

The FDA recently announced a significant

Extemporaneously Prepared Early Phase Clinical Trial Materials

A clinical research organization

100 HOT TOPICS FOR DISSERTATION FOR PG DIPLOMA/ DEGREE IN REGULATORY AFFAIRS

Validation Approach and Scope for Business Process System Validation. Epitome Technologies Private Limited

To be taught at the Ausia Biotech Aseptic Training Center in Hangzhou China

Microbiology and Auditing. Don Singer

Research Article Prospective Validation of Paracetamol Tablet Dosage Form

M.PHARM. (Pharmaceutics) + MBA (Pharma Tech And Health Care Management) FIRST YEAR TRIMESTER I

ASTRAZENECA GLOBAL POLICY QUALITY AND REGULATORY COMPLIANCE

HEALTHCARE Single - Use Systems CONTRACT MANUFACTURING SOLUTIONS PARTNER

PROCESS VALIDATION OF TABLETS: AN OVERVIEW

BACHELOR OF SCIENCE IN MICROBIOLOGY

Volt Pharma Associates (VPA) Quality Management & Regulatory Compliance (QMRC) Services

Quality assurance of pharmaceuticals

Testing Automated Manufacturing Processes

Monitoring manufacturing, production and storage environments in the pharmaceutical industry

MHRA GMP Data Integrity Definitions and Guidance for Industry January 2015

MADRAS CHRISTIAN COLLEGE (AUTONOMOUS) DEPARTMENT OF SOCIAL WORK (SFS) TAMBARAM CHENNAI 59 PHONE :

PROPOSED UPDATED TEXT FOR WHO GOOD MANUFACTURING PRACTICES FOR PHARMACEUTICAL PRODUCTS: MAIN PRINCIPLES (JANUARY 2013)

PROPOSAL FOR REVISION OF THE SUPPLEMENTARY GUIDELINES ON GOOD MANUFACTURING PRACTICES: VALIDATION, APPENDIX 7: NON-STERILE PROCESS VALIDATION

Birla Hospital Infrastructure Development Company Scope of service document

Brand Quality with Asian Advantages

Leila Kakko Tampere University of Applied science TRADITIONAL FOOD IN COMBATING FOODBORNE PATHOGENS 2011

The Future of Consumer Health Care

Reversed Phase High Presssure Liquid Chromatograhphic Technique for Determination of Sodium Alginate from Oral Suspension

OPER H6001. Pharmaceutical Operations Mgt. APPROVED. Pharmaceutical Operations Management for Engineers. Credits: 5. NFQ Level: 9

Pharmaceutical Wholesaler Site Inspection Checklist

CAREERS IN PHARMACY. Contrary to popular perception, a career in pharmacy is not only challenging but lucrative as well says Dr. U.B.

Quality Assurance. Disclosure for Lilli Møller Andersen. No relevant financial relationships exist for any issue mentioned in this presentation

GAMP5 - a lifecycle management framework for customized bioprocess solutions

Course Code CE609. Lecture : 03. Practical : 01. Course Credit. Tutorial : 00. Total : 04. Course Learning Outcomes

COMPLIANCE BY DESIGN FOR PHARMACEUTICAL QUALITY CONTROL LABORATORIES INSIGHT FROM FDA WARNING LETTERS

RISK IDENTIFICATION,ASSESSMENT & MITIGATION TEMPLATE


Pharmaceutical Industry

SUPPLEMENTARY GUIDELINES ON GOOD MANUFACTURING PRACTICES (GMP): VALIDATION

Transforming CliniCal Trials: The ability to aggregate and Visualize Data Efficiently to make impactful Decisions

Annex 7 Guidelines on pre-approval inspections

REGULATORY REQUIREMENTS OF PHARMACOVIGILANCE SYSTEM AND ITS COMPARISON IN INDIA AND USA

Lab Service, Asset Management and Extending the Life of Your Lab Equipment. Scott Greenwood Director, Services

New changes to cleanroom & clean air device classifications: ISO & 2

Evaluating System Suitability CE, GC, LC and A/D ChemStation Revisions: A.03.0x- A.08.0x

Transcription:

Course Title Course Code QUALITY ASSURANCE AND INTELLECTUAL PROPERTY RIGHTS PH606 Lecture : 3 Course Credit Practical : 0 Tutorial : 0 Total : 3 Course Objectives This subject gives basic knowledge about Intellectual Property Rights, various concepts of copyrights, trade mark and geographical limitations. To explain the students about various concepts of validation, designing of validation protocol and validation documents. This course will provide students insight into validation of various equipments, methods, formulations and building, quality management system, quality audits, concept of total quality management etc. Detailed Syllabus Sr. No. Name of Chapter & Details Hours Allotted SECTION I 1 Intellectual Property Rights: - Introduction, types, Scope and objectives of IPR in Pharmacy. Concept of property with respect to intellectual creativity. Tangible and Intangible property.

2 Definition, introduction, process of registration, term of registration and infringement of following IPR: copyrights, trade mark, geographical indication, industrial design. 06 3 Introduction: An understanding of the concepts of quality assurance, Good Manufacturing Practice and quality control as applied to the pharmaceutical industry. Organization and personnel, responsibilities, training, hygiene, personnel, records. Manufacturing Premises: Location, Design, plant layout, construction maintenance and sanitation, environmental control, utility services like gas, water, maintenance of sterile areas & control of contamination. Equipment, selection, purchase specifications, maintenance, clean-in place and sterilize- in place methods (TP and STP). Raw materials; purchase, specifications, stores, selection of venders & control of raw materials. 10 4 Good Laboratory Practices (GLP) SECTION II 5 Good Clinical Practices (GCP) 6 Introduction to Pharmaceutical Validation: Definition, Approaches to validation and scope of validation, Advantage of Validation, importance of Validation, Limitation of Validation, Organization for Validation, calibration & verification. 05 7 Validation of Building and facilities: (DQ, IQ, OQ, PQ)

8 Types of Process Validation (prospective, retrospective & concurrent) 02 9 Analytical Method Validation: General principles of analytical method validation for dosage forms. (accuracy, precision, specificity, linearity, range, robustness etc.) 10 Concept of Total Quality Management, Six Sigma methodology, ISO 9000. Controls on four M responsible for Quality variation in Pharmaceutical products. 05 11 Quality Audits 02 Instructional Method and Pedagogy: Lectures will be conducted with the aid of multi-media projector, black board, OHP etc. Assignments based on course content will be given to the students at the end of each unit/topic and will be evaluated at regular interval. Surprise tests/quizzes/tutorials will be conducted. Students Learning Outcomes: At the end of the course the students will be able to: Know about Intellectual Property Rights, various concepts of copyrights, trade mark and geographical limitations. Know details about basic concepts of quality, quality assurance and validation. Text books: 1. P. P.Sharma How to practice GMPs, 3rd edition, Vandana Publication 2. CGMP :Current Good Manufacturing Practices For Pharmaceuticals By Potdar Manohar A.,

CBS Publishers 3. P. P. Sharma How to practice GLP Vandana Publication. 4. Pharmaceutical Quality Assurance, M.A. Potdar, Nirali Prakashan, Pune. 5. Current Good Manufacturing Practices, M.A. Potdar, Pharma-Med Press, Hyderabad. 6. Good laboratory practice and regulations by Mohanan P.V. 7. J. R. Berry and R.A. Nash, Pharmaceutical process validation. 3rd Ed Marcel Dekker, 20. 8. B. T. Loftus & R. A. Nash, "Pharmaceutical Process Validation", Drugs and Pharm Sci. Series, Vol. 129, 3rd Ed., Marcel Dekker Inc., N.Y. 9. ISO 9000 and Total Quality Management Sadhank G Ghosh 10. Total quality management, principles, implementation and Cases, Sharma D. D., Sulatan Chand and Sons, New Delhi, 2000. 11. Fundamentals of Total Quality Managemnt, process analysis and improvement by Jens. J Daulgard, Kai Kriestensen and Gopal K. Kanji. Taylor and Francis Reference Books: 1. Intellectual property rights and biodiversity by Swansan T. 2. P. Warayan, Intellectual Property Laws, Eastern Law House. 3. Ira R. Bery, Introduction to the Pharmaceutical Regulatory Process, Drugs and Pharm Sci. Series, Vol. 144, Marcel Dekker Inc., N.Y. 4. Indian Pharmacopoeia, Vol. 1-3, 2007.The Indian Pharmacopoeia commission, Ghaziabad, Govt. of India. 5. The International Pharmacopoeia Vol 1,2,3,4,53rd Edition 6. A. C. Cartwright and Brian Mathews, International Pharmaceutical Registration Taylor and Francis Ltd. UK, 2002. 7. P. Warayan, Intellectual Property Laws, Eastern Law House. 8. Patents for Medicine, by N. B. Zareri, Indian Drug Manufacturers Association (IDMA) 9. The Theory & Practice of Industrial Pharmacy, 3rd edition, Leon Lachman, Herbert A.

Lieberman, Joseph. L. Karig, Varghese Publishing House, Bombay 10. Pharmaceutical Master Validation plan by S. Haiden, CRC press. 11. Validation of pharmaceutical process by Conleton F. 12. Sidney H. Willig, "Good Manufacturing Practices for Pharmaceuticals", Drugs and Pharm. Sci. Series, Vol. 109, Marcel Dekker Inc., N.Y. 13. GLP quality audit manual, Milton A. Anderson, Third edition, Informa Healthcare 14. Laboratory auditing for quality and regulatory compliance, by Donald C. Singer, Stefan and Stedan, Drugs and pharmaceutical sciences, Vol. 150 15. Laboratory auditing for quality and regulatory compliance, by Donald C. Singer, Taylor and Francis. 16. Total quality management, Dale H. Besterfield, Pearson Education, 3 rd edn., 20. Additional Resources Soft copies of quality assurance and intellectual property right books are available on http://www.pharmatext.org, www.pharmacyebooks.com, and in www.pharmamirror.com. Latest information regarding quality assurance and intellectual property right are available on http://www.pharmainfo.net Study material of quality assurance and intellectual property right are available on mypharmaguide.com, pharmatutor.com, authorstream.com, slideworld.com and in scribd.com.