Locker room furniture and coat racks
Quality and service The company C+P belongs to Christmann and Pfeifer group. Christmann & Pfeifer was founded in 1925 and operates in many European countries. In the furniture and furnishing system sector, C+P is one of the leading manufacturers in Europe today. Thanks to continuous innovation, constant investment and products geared to market requirements, C+P stands for quality and competence. Through our extensive know-how, our customers can rely on optimum solutions. C+P is the German market leader in steel coat rack systems and lockers Annually we manufacture over 300,000 compartments in several product series as well as special models for every application. Our inhouse research and development department works together with numerous universities and specialist institutes. Since the foundation of the company, C+P s success has culminated in a high level of cooperation with currently over 5000 specialized trade partners in Europe. Many of our products have been tested for safety (GS) by the Technical Inspection Agency of Thuringia (TÜV Thüringen). We will be glad to send you copies of the corresponding certificates on request. The proven material steel is fully recyclable. Thus, C+P steel furniture provides for an ecological work environment. Not to mention the cost savings for disposal. Every week 80 furniture trucks leave our manufacturing facilities. Our optimized, computer-aided route management system guarantees punctual deliveries. 2
Lockers for almost all applications! C+P furniture provides the optimum solution to practically every locker room and cloakroom furnishing task! The brochure provides you with a small extract from an unmatched complete range: Quality standards Page 4-5 Lockers 8000 series The millionfold proven, versatile basic range from the market leader C+P Page 6-11 Evolo lockers The evolution of a classic. We have reinvented the locker! Page 12-23 Fire brigade lockers Fire brigade lockers from C+P: Practical design for practical use! Page 24-25 Cambio lockers The exclusive range for high demands. Top design and unparalleled technology Page 26-27 Benches and coat racks with benches Bench solutions from the basic variant to the extensible comfort version Page 28-29 Assembled box lockers / Open coat rack systems Assembled box lockers and coat racks for every use, every requirement and every budget Page 30-33 We have lots more in store for you Page 34-35 3
Leading in corrosion protection and quality assurance Products from C+P have been known for their high quality standard for many years. This excellent reputation is based on our commitment to do all we can to combine professional workmanship and quality. To us, love of detail is as important as a well coordinated product range. Continual tests and test series are required in order to maintain and improve our quality standard. For example in our own laboratory and the attached testing chamber we do not test only product details, (common practice even in the automotive industry because of the costly procedure), but also the complete product. The newest scientific testing methods are used for this. An important criterion requiring constant observation is surface and corrosion protection, particularly for our lockers. Adhesion test: assessment of the adhesion of coatings on every underground Testing FE phosphatizing of our pretreatment plant Physical testing laboratory at C+P 4
At C+P you can select the suitable corrosion protection class for your field of application: As one of the first suppliers worldwide, C+P presents its own company standard with corrosion protection classes. This is based on decades of experience and practical, scientific tests. Take advantage of the technological lead and the competence of a leading manufacturer of locker room and cloakroom solutions! The following tables provide you with an overview. Salt spraying chamber with two lockers which are being tested as a complete product according to DIN 50021 at C+P Corrosion protection classes according to C+P company standard Corrosion protection classes Class I Dry areas Class II Damp areas Class III Wet areas Class IV Extreme areas Furniture to be set up in dry and normally ventilated rooms Furniture which is in rooms with increased humidity (50-70 percent) Furniture which is in wet areas with very high humidity, e. g. swimming baths Furniture for extreme climatic conditions as in salt water baths, slaughter houses etc. Construction Sheet steel Sheet steel electrolytically galvanized Special aluminium sheet Stainless steel 1.4301 brushed Coating High quality enamel coating Guaranty 5 year 5 year 10 year 15 year CORROSION PROTECTION GUARANTY CORROSION PROTECTION GUARANTY CORROSION PROTECTION GUARANTY CORROSION PROTECTION GUARANTY The following test methods are used regularly in the C+P testing laboratory DIN 50021 Salt spray test with subsequent testing according to DIN 53167 DIN 50017 Condensation test with subsequent testing according to DIN 53209 DIN 53151 Cross-cut adhesion test DIN 67530 Evaluation of gloss DIN 53153 Buchholz indentation resistance test DIN 5033 Colorimetry The classifications apply to all corrosion protection classes only when the surface is undamaged. 5
Basic lockers 8000 series Our proven basic series has the following convincing features: Sturdy sheet steel construction Doors hinged right, borne on pivots with vertical box reinforcement, louvers and stamped in label frame Compartment bottom can be swept out smoothly (8030 and 8040 series with cleaning openings) Towel hooks inside the door Insertable hat shelf and coat rod with 3 sliding hooks for each compartment Turning bolt latch for padlock Locker feet (e.g. in 8010 series) made of plastic = improved protection of the locker against corrosion! Feet in light gray with carcass color RAL 7035, finished in black with all other carcass colors Locker plinth (e.g. in 8020 series) with standard galvanized finish, coated in carcass color 5 compartments Whether with 150 mm high feet of plastic or with corrosion-protected plinth: our 500 mm deep coat rack compartments are available in the standard widths of 300 and 400 mm. Order no. 8010-50 Locker with 150 mm high feet, 5 300 mm compartments, 1850 x 1480 x 500 Order no. 8010-20 Locker with 150 mm high feet, 2 300 mm compartments, 1850 x 610 x 500 6
Order no. 8020-40 Locker with plinth, 4 300 mm compartments, doors smooth, 1800 x 1190 x 500 Order no. 8030-40 Locker with bench built in front, 4 300 mm compartments, with shortened doors, 1850 x 1190 x 500/815 Order no. 8040-40 Locker with lowered bench base and shortened doors, 4 300 mm compartments, 1850 x 1190 x 500/815 Order no. 8050-30 Locker with bench built underneath the locker, 3 300 mm compartments, doors smooth, bench slates made of wood or plastic, 2090 x 900 x 500/815 7
Streetwear / working clothes lockers 8000 series The separate storage of streetwear and working clothes is required wherever working clothes are exposed to heavy soiling or odor impact. You can choose from three variants here: Two 300 mm compartments with a common door = 600 mm required space per person (see large illustration on right) Two 300 mm compartments with doors closing together = also 600 mm required space per person (see large illustration at bottom right) One 400 mm compartment with one door, below the hat shelf divided by middle partition = 400 mm required space per person (see large illustration at bottom center) Four different partition models are available as required for the last, spacing-saving solution. Order no. 0090-00 Partition made of steel in fixed design Order no. 0080-00 Partition made of steel in swivelling design Order no. 8210-20 Locker consisting of two compartments with a common door, 150 mm high feet, 1850 x 610 x 500 400 mm Order no. 4400-706 Partition made of blue linen material, movable and swivelling, with several pockets Order no. 4400-705 Partition made of transparent plastic, movable and swivelling, easy care Order no. 8010-22 Locker with 150 mm high feet, 1850 x 810 x 500 one fixed middle partition made of steel per compartment Order no. 0090-00 Order no. 8022-40 Locker for two persons with doors closing together over 2 300 mm compartments, with 100 mm high plinth, 1800 x 1190 x 500 8
Assembled box lockers Basic assembled box lockers These assembled box lockers are equipped with single-walled doors. Because they have the same height and depth as the 8010 and 8020 series lockers, they can be combined with these lockers. The lockers are available with plinth or feet in widths of 300 or 400 mm as well as with 3, 4 or 5 tiers. Order no. 8010-205 Locker with 10 compartments, with 150 mm high feet, 1850 x 610 x 500 Order no. 8020-324 Locker with 12 compartments and with 100 mm high plinth, 1800 x 1200 x 500 Order no. 8010-404 Locker with 16 compartments, with 150 mm high feet, 1850 x 1190 x 500 Double tier lockers Double tier lockers save up to 50% space through half compartments and are primarily used in areas with changing locker assignment. They come on feet, on a plinth or with a bench built underneath the locker. Order no. 8320-30 Double tier locker with 100 mm high plinth, 1800 x 900 x 500 Order no. 8310-30 Double tier locker with 150 mm high feet, 1850 x 900 x 500 9
Additional fittings for 8000 series For the 8000 series we offer you a practical range of accessories, additional fittings and locking systems. Here a few examples: Sloping top designs Locker with integrated slope, Locker approx. 200 mm higher at the back Sloping top, approx. 230 mm high at the back (= nothing can remain on the locker!) for later assembly Order no. 8000/8002-80 (Com. w. 300/400 mm) Additional shelf not height adjustable (installation height approx. 250 mm) Order no. 8053-00 Security compartment inside, (instead of the hat compartment) with cylinder lock, com. width 300/400 mm Order no. 0019-00 Mirror inside the door, approx. 110 x 90 mm Order no. 8000-26 Height adjustment screws for locker feet (1 set = 4 pieces) for easy retrofitting of a level adjustment in lockers with feet Order no. 8001-303 Order no. 8500-172 Order no. 8001-323 Order no. 8505-02 Doors smooth without louvers, without label holders (ensure alternative ventilation e.g. through perforated rosettes!) Stamped in rosette Position: one rosette at the top and the bottom of the column rear panel respectively Door with perforated sheet metal for 8010-8050 series, com. w. 300/400 mm (square holes approx. 23 mm with approx. 5 mm ligament) Door opening limiter 90 10
Z lockers The practical rail with sliding hooks is totally userfriendly and enables garments to be hung at appropriate intervals. Extra space gained The use of guided folding doors with strap hinge and the special, patented anti-collision mechanism is a very space-saving solution. Thanks to z shaped double doors, long garments can be hung up in two compartments. The standard design is ventilated through the rear panel. 420 mm Order no. 8023-122 Z locker for two persons, with 100 mm high plinth, (level adjustable), 1820 x 420 x 510 Order no. 8023-224 Z locker for four persons, with 100 mm high plinth (level adjustable), dimensions (H x W x D in mm): 1820 x 820 x 510 Order no. 8053-224 Z locker for four persons with bench built underneath the locker, bench slats made of wood, 2090 x 820 x 510/ 825 11
S 3000 lockers What makes them so special? Extremely warp resistant doors thanks to closed profiles on the sides, doorstop silencers as standard fitting Ergonomically designed turning bolt latch with lock guard (standard) Numbering (optional) with selfadhesive film in the embossed label frame Alternate fronts (can also be fitted later!) choice of steel or decor doors (MDF) Easy-to-clean ventilation hole pattern thanks to smooth outer front (no protruding louvers) Novel feet made of plastic (= improved protection of the locker against corrosion!) consistently underpin the linear design and have a protective sleeve that covers the adjusting screw when the optional height adjustment is used. An ingenious feature! Practical storage box for shoes, helmets, bags, etc. This way the storage space under the seat is used optimally not to mention the easy cleaning! The seat made of solid beech wood also serves as a flap and can be opened only by the owner of the locker. 12
13
S 3000 with feet and plinth The two best-selling Evolo models: on optionally height adjustable plastic feet (= improved protection of the locker against corrosion!), e. g. for cleaning under the locker or on a corrosion-protected (galvanized) plinth for a clean finish with the floor. Whether on feet or a plinth Evolo is always the right choice! Top illustration: Order no. 48010-20 Locker with 150 mm high feet, dimensions (H x W x D in mm) 1850 x 610 x 500, doors made of steel Illustration on right: Order no. 48020-20 Locker with 100 mm high plinth, dimensions (H x W x D in mm) 1800 x 610 x 500, doors made of steel 14
The Evolo series lockers with decor fronts (MDF) are available in three designs: Hard maple Apple Ice birch Decor 4401-38 Decor 4401-39 Decor 4401-40 Evolo with bench The locker needs an integrated bench? Three variants are available: the bench built in front (locker on feet) as the most economical solution, the bench built underneath the locker for optimum cleaning under the locker or the lowered version for improved accessibility of the top hat compartment. The bench slats are made of rounded hardwood finished with a clear varnish. On request plastic bench slats are also available for no additional charge. Illustration below: Order no. 48030-30 Locker with bench built in front with 150 mm high feet and shortened doors. Dimensions (H x W x D in mm) 1850 x 900 x 500, doors made of steel Order no. 48050-40 Locker with bench built underneath the locker, dimensions (H x W x D in mm) 2090 x 1190 x 500, doors made of steel Order no. 48040-40 Locker with lowered bench base and shortened doors, dimensions (H x W x D in mm) 1850 x 1190 x 500, doors made of steel 15
Order no. 48022-20B Laundry and storage cabinet with doors closing together (with one lock) and 100 mm high plinth, doors made of steel. Dimensions (H x W x D in mm) 1800 x 610 x 500 Order no. 48020-20B Laundry and storage cabinet with singly lockable doors (both hinged right). 100 mm high plinth, doors made of steel. Dimensions (H x W x D in mm) 1800 x 610 x 500 S 3000 Multipurpose lockers - versatile and practical Evolo multipurpose lockers store clothing, cleansers and materials where they are needed and are thus a spacesaving alternative to classic double door cabinets. Order no. 48160-20 Laundry locker, 4 shelves on the left, hat shelf on the right with coat rod and sliding hooks, doors made of steel. Dimensions (H x W x D in mm) 1850 x 610 x 500 Order no. 48120-00 Cleaning equipment locker, 4 compartments to the left of the shortened partition, rod with 6 sliding hooks on the right, doors closing together, made of steel. Dimensions (H x W x D in mm) 1850 x 610 x 500 Order no. 48222-20B Laundry and storage cabinet with doors closing together without partition, 4 continuous shelves, doors made of steel. Dimensions (H x W x D in mm) 1850 x 610 x 500 16
Laundry collecting and dispensing lockers Up to now collecting and dispensing solutions have usually been exotics which did not match the lockers next to them. That is different with Evolo: now you can appoint everything in a uniform design! Standard design with laundry bag hooks Design with convenient telescopic pull-out for easy removal of the laundry bag Order no. 48170-701 for an additional charge Order no. 48070-210 Laundry collecting locker, one swing flap in the double door at the top, with laundry bag hooks inside, with 100 mm high plinth, dimensions (H x W x D in mm) 1800 x 420 x 500 Order no. 48160-205 Laundry dispensing locker with central door by which all compartments on top of each other can be opened simultaneously, with 150 mm high feet, dimensions (H x W x D in mm) 1850 x 610 x 500 17
S 3000 Lockers for streetwear and working clothes The separate storage of streetwear and working clothes is required wherever working clothes are exposed to heavy soiling or odor impact or where hygienic workwear must be protected from dust and dirt of streetwear (e.g. in the food industry). Evolo also offers all the functional solutions described in detail for the 8000 series on page 8. A few examples are shown below: Order no. 48052-40 (with plastic bench slats) Order no. 48022-22 Locker with plinth and doors closing in the middle in pairs. 2 compartments for 1 person, hat shelf to the left and right of the inner partition, coat rod and 3 sliding hooks Dimensions (H x W x D in mm) 1800 x 810 x 500 Order no. 48210-40 Locker with feet. 2 doors over 4 compartments, hat shelf to the left and right of the inner partition, coat rod and 3 sliding hooks Dimensions (H x W x D in mm) 1850 x 1190 x 500 Order no. 48250-40 (with plastic bench slats) Locker with bench built underneath the locker. 2 doors over 4 compartments, hat shelf to the left and right of the inner partition, coat rod and 3 sliding hooks Dimensions (H x W x D in mm) 2090 x 1190 x 500 Order no. 48042-40 Locker with lowered bench base. With 2 shortened doors closing together in the middle in pairs. Dimensions (H x W x D in mm) 1850 x 1190 x 500 18
Evolo offers many customized special solutions The Evolo design principle allows for a variety of standard fittings and customized special solutions. We have put together a few previously realized applications for you here. Storage box The Evolo storage box is used under the streetwear / working clothes version. The box enables the use of previously unused space inside and a clean finish with the floor even for lockers with a bench outside. As a result, there is much less floor area to be cleaned! Combined locker with open compartments In this version also with the storage box the open compartments are installed together with the lockable coat rack compartment in one locker. A perforated sheet metal door serves ventilation and easy inspection of the locker contents. Special solution for large companies for optimizing the passageway area: Pull-out bench made of beech laminate with a standard load capacity of 80 kg. Exhaust air ventilation system Evolo can be perfectly adapted for forced ventilation as required by the customer. An optimum flow is ensured with suitable air vents and adjustable disk valves when the system is installed. Also available even with connectable dryer on request! Individual locker labelling Many larger companies already use locker labelling systems which include not only the name of the employee but also further information (such as department, location, etc). The Evolo label holder is specially adapted to these systems and is thus the perfect way to install integrated numbering at the top of the locker door. 19
S 3000 Double tier lockers Evolo combines the benefit of double tier versions (50% saving of space through half compartments) with the varied door design options: - Doors made of steel offer practically unlimited color options, usually for no additional charge - Doors with decor fronts feature an attractive wood look (available in the decors hard maple, apple or ice birch) Order no. 48320-22 Double tier locker with plinth. 4 compartments, dimensions (H x W x D in mm) 1800 x 810 x 500 Order no. 48310-40 Double tier locker with feet. 8 compartments, dimensions (H x W x D in mm) 1850 x 1190 x 500 Order no. 48320-530 Double tier locker with plinth, doors with decor fronts, 6 compartments, dimensions (H x W x D in mm) 1800 x 900 x 500 Order no. 48350-30 Double tier locker with bench built underneath the locker. 6 compartments, dimensions (H x W x D in mm) 2090 x 900 x 500 20
Order no. 48020-324 Assembled box locker on plinth 3 compartments next to each other, 4 tiers, compartment width 400 mm, dimensions (H x W x D in mm) 1800 x 1200 x 500 Order no. 48010-504 Assembled box locker on feet, doors with decor fronts, 3 compartments next to each other, 4 tiers, compartment width 300 mm, dimensions (H x W x D in mm) 1850 x 900 x 500 Evolo assembled box lockers Evolo assembled box lockers can also be flexibly designed with alternate fronts optionally made of steel or with wood decor. Thanks to three box heights with compartment widths of 300 and 400 mm, you can choose the right model for every requirement. All assembled box lockers have smooth doors and cylinder locks with 2 keys each as a standard fitting. Order no. 48010-303 Assembled box locker on plinth, 3 compartments next to each other, 3 tiers, compartment width 300 mm, dimensions (H x W x D in mm) 1800 x 900 x 500 Order no. 48010-505 Assembled box locker on feet, doors with decor fronts, shelves in carcass color, 4 compartments next to each other, 5 tiers, compartment width 300 mm, dimensions (H x W x D in mm) 1850 x 1190 x 500 21
Evolo accessories The right accessories help you to use your Evolo lockers optimally and benefit from additional practical uses. The fittings shown here are only examples from our complete range. That meets your every need! Partitions below the hat shelf made of steel in swivelling design made of steel in fixed design made of transparent plastic, movable and swivelling, easy care made of blue linen material, movable and swivelling, with several pockets Additional fittings Additional shelf not height adjustable (installation height approx. 250 mm) Security compartment inside (instead of the hat compartment) with cylinder lock, com. width 300/400 mm Mirror inside the door, approx. 110 x 90 mm Standard coathanger Hardwood painted black (with special mounting) Flip-flop and shoe holder for mounting on steel doors (not with storage box) Towel rail for mounting on steel doors Flip-flop and shoe holder for mounting on decor doors (not with storage box) Towel rail for mounting on decor doors Matching corner, front and side panels are available for the steel doors as well as for the wood decor fronts 22
Evolo locking systems Apart from mechanical locking systems, electronic locking systems have become increasingly important in recent years - either as a stand-alone solution or as part of complete building automation. Common electronic locking systems can be easily integrated into Evolo lockers. Gastro Front office reception Fitness + Wellness Ticketing Pay machines LockerLock- Key Further models: Key card or key stick Parking SAFE-O-MAT deposit and token-operated locks The best-selling classic among coin-operated locks. With traditional master key system or with the innovative PROMAX replaceable cylinder system. Ojmar coin deposit lock The alternative for the basic function of the deposit lock. GAT Admission control Network coding Cashless payment Cylinder lock Optionally available for all Evolo lockers. Every lock is supplied with 2 keys. Master key systems are available with and without security certificate for more safety and convenience. Turning bolt latch Standard Evolo fittings: The ergonomically designed turning bolt latch for padlocks has a standard lock guard. Suitable for padlocks with a shackle thickness of up to 6 mm. SAFE-O-TRONIC Inscription and orientation What good is the best changing room facility if you keep losing your way in it? C+P inscription systems put an end to this searching. From simple locker numbering to direction signs with graphic characters one thing is clear: Orientation is more than just a detail! 23
The specialists: Fire department lockers Evolo fire department lockers from C+P were designed in close cooperation with experienced experts. These state-of-the-art lockers enable the storage of all personal pieces of equipment and with a depth of 600 mm and height of 2000 mm provide enough space for storing modern fire protection clothing. At the same time, they have clever details such as the universal helmet holder and the security compartment with a special combination lock. Everything designed for safe storage and fast removal of operation clothing and equipment! Special models adapted to your special requirements are also possible: Please ask for your requirements based on your business premises and profit from C+P s know-how! Boot mat collects dirty water, protects the locker against damage and makes cleaning easier. The louvers are kept clear by positioning the mat in the locker. Side hook strip with movable extra hook, e. g. for safety belts, lifelines, breathing masks etc. Security compartment with foam rubber mat inside to protect valuables deposited when the door is closed (slit above the door). Special combination lock with scrambling and master key function. The security compartment door does not project beyond the housing when opened either, thus keeping the passageway clear (= safety also during hectic changing situations). Helmet holder for safe storage, optimum airing and drying as well as fast and easy removal of all common helmet types. 24
S 3000 Order no. 48315-13 + 48015-701 (combination lock) Fire department locker, 1 compartment, on 150 mm high feet, compartment width 500 mm. Universal helmet holder inside at the top right, shelf or optional security compartment inside at the top left. Below this coat rod with 3 hooks, 1 hook for safety belts, lifelines etc. Dimensions (H x W x D in mm): 2000 x 520 x 600 Order no. 48315-22 + 48015-701 (combination lock) Fire department locker, 2 compartments, on 150 mm high feet, compartment width 400 mm. Security compartment at the top, special shelves for helmets below it available optionally. Below this coat rod with 3 hooks, 1 hook on the side for safety belts, lifelines etc. Dimensions (H x W x D in mm): 2000 x 810 x 500 25
Cambio from C+P is more than a locker! With various materials and colors you can design your rooms attractively and create a distinctive atmosphere. can do more than others The following features make Cambio so unique: Innovative ventilation and drying through the C+P drying guaranty with self ventilation (SVL concept), forced ventilation (FVL) or forced ventilation with dryer (FVLD). Modular retrofitting enabled by an ingenious system carcass and a wide range of compartment sizes and door materials. Optimum use of space and interior design thanks to inside and outside corner lockers, shelf elements, niche solutions and use of the front ends Underbench solutions designed to meet your needs such as height-adjustable feet, plinth solutions, benches built underneath the locker to a floating setup on column bases 26
S 6000 Ask for your personal copy of the Cambio brochure with many furnishing examples from the practical experience of a market leader! 27
Benches and coat racks with benches Benches and coat racks with benches from the C+P basic range meet all the demands you can make on a timeless classic: Comfortable bench slats made of hardwood rounded at the top (on request plastic bench slats are also available for no additional charge) Floor gliders for level adjustment Coat racks with benches with plastic double coat hooks, concealed according to DIN, with exchangeable individual label Delivered completely preassembled Many selectable frame colors freshen up the atmosphere in every changing room. Order no. 8051-000 Free standing bench, (without shoe rack) with 4 feet Dimensions (H x W x D in mm): 420 x 1500 x 353 Order no. 8051-010, (as described above) but with shoe rack Order no. 8051-110 One-sided coat rack with bench and shoe rack, with 4 feet, hook strip with 6 double hooks Dimensions (H x W x D in mm): 1650 x 1500 x 403 Order no. 8051-210 Double-sided coat rack with bench and shoe rack, with 4 feet, hook strip with 2 x 6 double hooks Dimensions (H x W x D in mm): 1650 x 1500 x 756 The comfort range adapts to every room situation! 28
Bench slats made of hardwood rounded at the top Shoe rack is recessed to prevent inappropriate use as step Comfort coat rack hooks with exchangeable individual label Optional floor fastening Order no. 8051-300 Order no. 8051-800 + shoe rack 2 x 8051-101 The C+P comfort range enables flexible connections without double feet. The bench system can be adapted to all spatial conditions with basic and add-on benches, inside and outside corner solutions as well as two modular dimensions (see large illustration). Apart from the features of the basic coat racks with benches, the comfort version offers many advantages, e.g.: Seats optionally made of full core material Feet and frame made of stainless steel also available (e. g. for food industries) Shoe rack recessed (to prevent inappropriate use as step) Optional floor fastening Remain flexible with benches and coat racks with benches from the C+P comfort range! Order no. 8051-300 Free standing comfort bench, with 4 feet, 420 x 1500 x 390 Order no. 8051-800 Free standing comfort coat rack with bench, with 6 feet, (+ 2 shoe racks Order no. 8051-101) 1650 x 1500 x 790 29
Assembled box lockers take a lot of wear and tear! Security lockers with special doors are absolutely sturdy and vandal-proof. Thanks to the outwardly curved, 1.5 mm thick steel sheet, the doors are extremely stable. An own compartment for everyone. For permanent use or changing assignment. For schools, fitness studios, supermarkets or libraries. With cylinder locks, deposit or token-operated locks or electronic locking systems. Whatever the requirements are: C+P assembled box lockers offer the right solution to every need! Order no. 8570-372 Security lockers with special doors with 5 tiers, 1950 x 1150 x 540 Order no. 8270-201 Assembled box locker with 2 tiers, doors single-walled reinforced, 1 coat rod inside, 1950 x 620 x 490 Order no. 8370-203 Extra-large assembled box locker with 3 tiers, doors single-walled reinforced, 1950 x 820 x 590 Order no. 8570-401 Extra-large assembled box locker with 5 tiers, doors double-walled, 1950 x 1120 x 490 30
Compartments for various uses Special assembled box lockers These lockers were developed for various applications (e. g. superstores, libraries etc.) and therefore have different dimensions than the basic range models. They are fitted with double-walled or reinforced doors. Order no. 80700-40 Assembled box locker with 5 tiers and 4 boxes next to each other, ( = 20 boxes) 1950 x 900 x 480 Order no. 82700-10 Assembled locker box with 5 tiers, 1950 x 460 x 480 Order no. 8070-201 Small compartment locker with 10 tiers and 2 boxes next to each other, number plate in lock area Dimensions (H x W x D in mm): 1950 x 460 x 200 Order no. 8170-602 Spacing-saving locker with 6 compartments, (also available with 4 or 8 compartments), compartment width 150 mm, 1 shelf inside at the top, coat rod with 2 hooks below it Dimensions (H x W x D in mm): 1950 x 920 x 490 Order no. 8170-211 Safe deposit box locker with 2 x 11 compartments, doors shortened (e. g. for letter drop) with label frame made of plastic Dimensions (H x W x D in mm): 1950 x 620 x 490 31
Open coat rack systems Perfect for use in offices or areas around offices. The assembled box lockers of these open coat racks are equipped with double-walled doors and are available in two box sizes. Every door has a cylinder lock with 2 keys. The system can be set up quickly and easily. Every desired configuration is possible through continuous connection of the individual elements. Order no. 80700-00 Open coat rack for 5 persons, consisting of assembled box locker and end panel, top shelf in between, hat rack with 5 coathangers and shoe rack. Dimensions (H x W x D in mm): 1950 x 740 x 480 Order no. 80710-00 Open coat rack for 10 persons, consisting of 2 assembled box lockers, top shelf in between, hat rack with 10 coathangers and shoe rack. Dimensions (H x W x D in mm): 1950 x 1430 x 480 32
Lots of storage space for different applications. There is even room for a motorcycle helmet in the compartments. Absolutely sturdy Open coat rack with special doors Looking for something a bit larger, a bit finer and even sturdier? Then this open coat rack with special doors is the right choice! The doors are not only extremely robust but also have an impressive design. Every box can be locked with a cylinder lock with two keys. Order no. 8571-000 Open coat rack for 10 persons, consisting of two security lockers, one of them with doors hinged left, hat and shoe rack in between, 10 plastic coathangers made of black plastic. Dimensions (H x W x D in mm): 1950 x 1730 x 540 33
We have lots more in store for you Desks and accessories Everything for the workplace: Desks, conference tables, mobile and stationary pedestal cabinets, occasional furniture, accessories... Cabinet and filing systems 34
Everything for storage: Double door cabinets, sliding door cabinets, file cabinets, flat file cabinets, racks... Storeroom and workshop Everything for the workshop: Drawer cabinets, double door cabinets, sliding door cabinets, workbenches, storage racks... C+P is your partner when furnishing solutions are concerned! 35
For more information about Locker Systems contact Modern Office Systems today!