M.S. in Electrical Engineering

Transcription

1 1 M.S. in Electrical Engineering Degree Requirements Bridge Program Students who have earned a Bachelor of Science in Engineering Technology (B.S.E.T.) degree, or who lack an appropriate background may be admitted and be required to take selected courses in addition to the degree requirements in order to make up deficiencies. They must attain a grade of B or better in each course. At the discretion of the department, students who have taken courses equivalent to these may have their bridge programs reduced accordingly. Master s Program Upon entering the program, students select an area of specialization supervised by the MSEE Program Advisor. The master s program consists of 30 credits. Students who enter the program but who do not receive departmental or research-based awards have three program options: 24 course credits and 6 credits of master s thesis; or 27 course credits and 3 credits of master s project; or 30 course credits not to include either a master s project or thesis. Thesis is required for all those receiving departmental or research-based support. For all others, a project or thesis is optional. Students should consult with the Program Advisor or designee before registering for courses to make sure they are meeting department requirements. As a requirement for graduation, students must achieve a 3.0 cumulative GPA in graduate-level courses, not including the master s thesis or project. The project grade must be B or better. ECE courses at the 500 level are not acceptable for credit toward a graduate degree in electrical engineering. Only one 500 level course outside the department may be applied for credit toward a graduate degree in electrical engineering. Areas of Specialization Entering students must select an area of specialization during their first semester. Special topics courses and electives are chosen with the approval of the MSEE Program Advisor or designee. Two non-ece graduate courses may be chosen. Students should contact the MSEE Program Advisor for guidance. Focus Area: Communications, Signal Processing and Microwave (courses only) ECE 742 ECE 740 ECE 730 ECE 632 I Advanced Theory of Guided Waves Antenna Theory Select six of the following: 18 ECE 609 ECE 622 ECE 623 ECE 625 Artificial Neural Networks Wave Propagation Fourier Optics Fiber and Integrated Optics

2 2 M.S. in Electrical Engineering ECE 626 Optoelectronics ECE 644 Wireless Communication ECE 746 Adaptive Array Processing and Interference Cancellation ECE 747 Signal Decomposition Techniques: Transforms, Sub-bands, and Wavelets ECE 755 Advanced Topics in Digital Communications ECE 757 Advanced Wireless Communications ECE 776 Information Theory ECE 777 Statistical Decision Theory in Communications ECE 778 Algebraic Coding for Information Transmission Focus Area: Communications, Signal Processing and Microwave (Master s project) ECE 742 I ECE 740 Advanced ECE 730 Theory of Guided Waves ECE 632 Antenna Theory Project ECE 700 Master S Project 3 Select five of the following: 15 ECE 609 Artificial Neural Networks ECE 622 Wave Propagation ECE 623 Fourier Optics ECE 625 Fiber and Integrated Optics ECE 626 Optoelectronics ECE 644 Wireless Communication ECE 746 Adaptive Array Processing and Interference Cancellation ECE 747 Signal Decomposition Techniques: Transforms, Sub-bands, and Wavelets

3 3 ECE 755 Advanced Topics in Digital Communications ECE 757 Advanced Wireless Communications ECE 776 Information Theory ECE 777 Statistical Decision Theory in Communications ECE 778 Algebraic Coding for Information Transmission Focus Area: Communications, Signal Processing and Microwave (Master s thesis) ECE 742 I ECE 740 Advanced ECE 730 Theory of Guided Waves ECE 632 Antenna Theory Thesis ECE 701 Master S Thesis 6 Select four of the following: 12 ECE 609 Artificial Neural Networks ECE 622 Wave Propagation ECE 623 Fourier Optics ECE 625 Fiber and Integrated Optics ECE 626 Optoelectronics ECE 644 Wireless Communication ECE 746 Adaptive Array Processing and Interference Cancellation ECE 747 Signal Decomposition Techniques: Transforms, Sub-bands, and Wavelets ECE 755 Advanced Topics in Digital Communications ECE 757 Advanced Wireless Communications ECE 776 Information Theory ECE 777 Statistical Decision Theory in Communications ECE 778 Algebraic Coding for Information Transmission

4 4 M.S. in Electrical Engineering Focus Area : Computer Networking (courses only) ECE 683 Computer Network Design and Analysis 3 ECE 783 Computer Communication Networks 3 Select six of the following: 18 ECE 637 Internet and Higher-Layer Protocols ECE 638 Network Management and Security ECE 639 Principles of Broadband Networks ECE 644 Wireless Communication ECE 645 Wireless Networks ECE 658 VLSI Design I ECE 681 High Performance Routers and Switches ECE 690 Computer Systems Architecture ECE 742 I ECE 685 Network Interface Design CS 610 Data Structures and Algorithms CS 665 Algorithmic Graph Theory MATH 661 Applied Statistics MGMT 685 Operations Research and Decision Making Focus Area : Computer Networking (Master s project)

5 5 ECE 683 Computer Network Design and Analysis 3 ECE 783 Computer Communication Networks 3 Project ECE 700 Master S Project 3 Select five of the following: 15 ECE 637 Internet and Higher-Layer Protocols ECE 638 Network Management and Security ECE 639 Principles of Broadband Networks ECE 644 Wireless Communication ECE 645 Wireless Networks ECE 658 VLSI Design I ECE 681 High Performance Routers and Switches ECE 690 Computer Systems Architecture ECE 742 I ECE 745 ECE 685 Network Interface Design CS 610 Data Structures and Algorithms CS 665 Algorithmic Graph Theory MATH 661 Applied Statistics MGMT 685 Operations Research and Decision Making Focus Area : Computer Networking (Master s thesis)

6 6 M.S. in Electrical Engineering ECE 683 Computer Network Design and Analysis 3 ECE 783 Computer Communication Networks 3 Thesis ECE 701 Master S Thesis 6 Select four of the following: 12 ECE 637 Internet and Higher-Layer Protocols ECE 638 Network Management and Security ECE 639 Principles of Broadband Networks ECE 644 Wireless Communication ECE 645 Wireless Networks ECE 658 VLSI Design I ECE 681 High Performance Routers and Switches ECE 690 Computer Systems Architecture ECE 742 I ECE 745 ECE 685 Network Interface Design CS 610 Data Structures and Algorithms CS 665 Algorithmic Graph Theory MATH 661 Applied Statistics MGMT 685 Operations Research and Decision Making NJIT Admins need to add H4 for FOCUS AREA (courses only) ECE 689 Computer Arithmetic Algorithms 3 ECE 690 Computer Systems Architecture 3 Select six of the following: 18

7 7 ECE 612 Computer Methods Applied to Power Systems ECE 643 Digital Image Processing I ECE 650 Electronic Circuits ECE 664 Real-time Computer Control Systems ECE 686 Instrumentation Systems and Microprocessors ECE 687 Design of Medical Instrumentation ECE 688 Microcontrollers in Instrumentation NJIT Admins need to add H4 for FOCUS AREA (Master s project) ECE 689 Computer Arithmetic Algorithms 3 ECE 690 Computer Systems Architecture 3 Project ECE 700 Master S Project 3 Select five of the following: 15 ECE 612 Computer Methods Applied to Power Systems ECE 643 Digital Image Processing I ECE 650 Electronic Circuits ECE 664 Real-time Computer Control Systems ECE 686 Instrumentation Systems and Microprocessors ECE 687 Design of Medical Instrumentation ECE 688 Microcontrollers in Instrumentation

8 8 M.S. in Electrical Engineering NJIT Admins need to add H4 for FOCUS AREA (Master s thesis) ECE 373 ECE 689 Computer Arithmetic Algorithms 3 ECE 690 Computer Systems Architecture 3 Thesis ECE 701 Master S Thesis 6 Select four of the following: 12 ECE 612 Computer Methods Applied to Power Systems ECE 643 Digital Image Processing I ECE 650 Electronic Circuits ECE 664 Real-time Computer Control Systems ECE 686 Instrumentation Systems and Microprocessors ECE 687 Design of Medical Instrumentation ECE 688 Microcontrollers in Instrumentation Focus Area : Solid State, VLSI and Electro-optics Systems (courses only)

9 9 ECE 622 Wave Propagation ECE 626 Optoelectronics ECE 650 Electronic Circuits ECE 657 Semiconductor Devices ECE 658 VLSI Design I ECE 758 VLSI Design II Select six of the following: 18 ECE 623 Fourier Optics ECE 624 Optical Engineering ECE 625 Fiber and Integrated Optics ECE 630 Microwave Engineering ECE 648 Digital Microelectronics ECE 659 Fabrication Principles of Electronic and Optoelectronic Devices ECE 690 Computer Systems Architecture ECE 730 Theory of Guided Waves ECE 739 Laser Systems ECE 756 Advanced Topics in Semiconductor Devices ECE 789 Selected Topics in Electrical and Computer Engineering II ECE 768 Optimal Control Theory MTSE 702 Characterization of Solids MTSE 650 Physical Metallurgy MTSE 765 Science and Technology of Thin Films Focus Area : Solid State, VLSI and Electro-optics Systems (Master s project)

10 10 M.S. in Electrical Engineering ECE 622 Wave Propagation ECE 626 Optoelectronics ECE 650 Electronic Circuits ECE 657 Semiconductor Devices ECE 658 VLSI Design I ECE 758 VLSI Design II Project ECE 700 Master S Project 3 Select five of the following: 15 ECE 623 Fourier Optics ECE 624 Optical Engineering ECE 625 Fiber and Integrated Optics ECE 630 Microwave Engineering ECE 648 Digital Microelectronics ECE 659 Fabrication Principles of Electronic and Optoelectronic Devices ECE 690 Computer Systems Architecture ECE 730 Theory of Guided Waves ECE 739 Laser Systems ECE 756 Advanced Topics in Semiconductor Devices ECE 789 Selected Topics in Electrical and Computer Engineering II ECE 768 Optimal Control Theory MTSE 702 Characterization of Solids MTSE 650 Physical Metallurgy MTSE 765 Science and Technology of Thin Films Focus Area : Solid State, VLSI and Electro-optics Systems (Master s thesis)

11 11 ECE 622 Wave Propagation ECE 626 Optoelectronics ECE 650 Electronic Circuits ECE 657 Semiconductor Devices ECE 658 VLSI Design I ECE 758 VLSI Design II Thesis ECE 701 Master S Thesis 6 Select four of the following: 12 ECE 623 Fourier Optics ECE 624 Optical Engineering ECE 625 Fiber and Integrated Optics ECE 630 Microwave Engineering ECE 648 Digital Microelectronics ECE 659 Fabrication Principles of Electronic and Optoelectronic Devices ECE 690 Computer Systems Architecture ECE 730 Theory of Guided Waves ECE 739 Laser Systems ECE 756 Advanced Topics in Semiconductor Devices ECE 789 Selected Topics in Electrical and Computer Engineering II ECE 768 Optimal Control Theory MTSE 702 Characterization of Solids MTSE 650 Physical Metallurgy MTSE 765 Science and Technology of Thin Films Focus Area : Intelligent Systems (courses only)

12 12 M.S. in Electrical Engineering ECE 609 Artificial Neural Networks ECE 610 Power System Steady-State Analysis Select six of the following: 18 ECE 611 Transients in Power Systems ECE 612 Computer Methods Applied to Power Systems ECE 613 Protection of Power Systems ECE 616 Power Electronics ECE 664 Real-time Computer Control Systems ECE 666 I ECE 661 Control System Components ECE 766 Stability Theory of Nonlinear Systems ECE 768 Optimal Control Theory ECE 769 Stochastic Estimation and Control Focus Area : Intelligent Systems (Master s project) ECE 609 Artificial Neural Networks ECE 610 Power System Steady-State Analysis

13 13 Project ECE 700 Master S Project 3 Select five of the following: 15 ECE 611 Transients in Power Systems ECE 612 Computer Methods Applied to Power Systems ECE 613 Protection of Power Systems ECE 616 Power Electronics ECE 664 Real-time Computer Control Systems ECE 666 I ECE 661 Control System Components ECE 766 Stability Theory of Nonlinear Systems ECE 768 Optimal Control Theory ECE 769 Stochastic Estimation and Control Focus Area : Intelligent Systems (Master s thesis) ECE 609 Artificial Neural Networks ECE 610 Power System Steady-State Analysis Thesis ECE 701 Master S Thesis 6 Select four of the following: 12 ECE 611 Transients in Power Systems ECE 612 Computer Methods Applied to Power Systems ECE 613 Protection of Power Systems ECE 616 Power Electronics

14 14 M.S. in Electrical Engineering ECE 664 Real-time Computer Control Systems ECE 666 I ECE 661 Control System Components ECE 766 Stability Theory of Nonlinear Systems ECE 768 Optimal Control Theory ECE 769 Stochastic Estimation and Control