Basic Concepts: The Military s First Line of Defense

Transcription

1

2 WHAT S INSIDE Table of Contents WHAT S INSIDE Introduction...2 How to Order...3 NSN Number Summary Guide Order by National Stock Number (NSN) DRIVE-THROUGH BERMS Rigid-Lock Fail-Safe QuickBerm Rigid Containment System (RCS)...8 SPECIALTY SOLUTIONS Expandable Containment Pad...9 Modular Channel QuickBerm...10 All-Terrain Berm...11 LIGHT-DUTY BERMS Decon QuickBerm...12 Sentry Lite...13 BERM ACCESSORIES Ground and Track Berm Guards...14 AROUND THE SHOP Drip Berms...15 Battery/Maintenance Spill Pads...16 Sentry Oil-Only Spill Kits...17 STRUCTURED SPILL CONTAINMENT AND RECYCLING Sentry Accumulation Centers and Ramp...18 Sentry Spill Control Pallets...19 Sentry IBC Pallet and Shed...20 Sentry DrumSheds...21 Spill Trays...22 Aerosolv Aerosol Can Disposal System and Aerosolv Super System...23 SAFETY CABINETS Sentry Classic Safety Cabinets for Flammables Sentry Slimline Safety Cabinet...26 Sentry Wall-Mount Safety Cabinet and Sentry Undercounter Safety Cabinets...27 Sentry Countertop and Compac Safety Cabinets and Sentry Aerosol Can Safety Cabinet...28 Sentry Classic Safety Cabinets for Corrosives...29 Sentry Safety Cabinets for Combustibles...30 Sentry Safety Cabinets for Pesticides...31 Sentry Hazardous Material Safety Cabinets SAFETY CONTAINERS Sentry Type I Safety Cans...34 Sentry Type II Safety Cans...35 Sentry D.O.T. Safety Cans...36 Sentry Oily Waste Cans...37 Sentry Plunger Cans and Safety Drum Cover...38 Sentry Drum Funnel and Sentry Antistatic Wire...39 BUILDINGS AND LOCKERS U.S. Chemical Storage Customized Buildings and Pre-Engineered Outdoor Safety Lockers...40 U.S. Chemical Storage Custom Fire-Rated Buildings...41 U.S. Chemical Storage Custom Non-Combustible and Modular Buildings...42 Parts and Accessories Specific to Your Custom Building Application...43 U.S. Chemical Storage Pre-Engineered Outdoor Safety Lockers...44 Accessories for Non-Combustible Pre-Engineered Lockers...45 SMOKING RECEPTACLES Smoker s Cease-Fire Smoking Receptacles...46 REGULATORY REFERENCE Military Environmental Stewardship and SPCC...47 Basic Concepts: The Military s First Line of Defense The CST Team arrives In Washington, D.C., in response to an anthrax scare, but not before calling on Basic Concepts to provide the decon washdown containment. Before launching a critical refueling operation in Afghanistan, a military unit requests that Basic Concepts be there to provide secondary spill containment. When it comes to environmental spill protection, the U.S. military relies on Basic Concepts. NEW! Expanded product line and catalog Now including NSN numbers! You may have noticed that our catalog has doubled in size. That s because we now offer several new products for your safety containment needs: Welcome to our new line of safety cabinets, safety cans, and related products for liquid flammable safety. Our new cabinets allow you to store hazardous chemicals safely and help you organize, segregate, and visually identify dangerous liquids. Most carry FM Global approval and meet the National Fire Protection Association (NFPA 30) and OSHA 29 Code of Federal Regulations. They include a 10-year warranty. Our new safety cans include a variety of sizes and styles. Each one starts with quality materials, superior workmanship, and rigorous testing so it will stand up to years of hard use. They are FM-approved and/or UL-listed, and meet OSHA standards. When handling fuel, solvents, or other potentially hazardous liquids, use safety cans to protect your people, property, and the environment. For even larger hazardous storage needs, we now offer safety storage lockers and buildings through affiliation with U.S. Chemical Storage (USCS). From ready-made pre-engineered two-drum lockers, to a custom-designed building, USCS offers a solution to virtually any storage requirement. See pages to learn more. 2

3 Make Basic Concepts part of your Spill Prevention, Containment, Control, and Countermeasure Plan According to the revised Clean Water Act (Title 40, CFR 112), if you store any type of oil on-site above or below ground you may be required to prepare and implement a Spill Prevention, Control and Countermeasure Plan. Among the many contingencies called for in a properly constructed SPCC Plan is an adequate secondary spill containment solution. To learn more about whether your facility is at risk or the requirements for an SPCC Plan, visit or contact a certified and licensed professional engineer. To ensure you ve got the right secondary spill containment solution to remain in compliance, contact Basic Concepts. Approval and Compliance Key FM UL/ULC N O I A H E S V FM Global tested and approved Underwriters Laboratories listed in the U.S. and Canada Complies with National Fire Protection Association (NFPA) Flammable and Combustible Liquids Code 30 Complies with Occupational Safety and Health Administration (OSHA) Regulations Complies with the International Fire Code Complies with NFPA 1 Fire Code, 2012 Edition Complies with NFPA 400 Hazardous Material Code Complies with Environmental Protection Agency (EPA) Regulations Supports EPA Spill Prevention, Control and Countermeasures Rule (SPCC) Validated by the EPA Environmental Technology Verification Program WHAT S INSIDE How to Order Contact PHONE: (8 a.m. to 5 p.m. Eastern Standard Time, Monday through Friday) FAX: ONLINE (GSA ADVANTAGE OR DOD ): or For GSA Advantage orders, use GSA contract # GS07F9543G. Order by National Stock Number (NSN). See pages 4-5. Payment Options Government IMPAC card, check, and bank wires. Helpful Information FEDERAL ID NUMBER: GOVERNMENT CAGE CODE: 0V4E7 DUNS NUMBER: CCR NUMBER: 1996K

4 NSN NUMBER SUMMARY GUIDE Order by National Stock Number (NSN) Rigid-Lock Fail-Safe QuickBerm Kit NSN Description Application Rigid-Lock Fail-Safe QuickBerm 4 ft x 6 ft x 1 ft Kit Rigid-Lock Fail-Safe QuickBerm 10 ft x 10 ft x 1 ft Kit Rigid-Lock Fail-Safe QuickBerm 10 ft x 16 ft x 1 ft Kit Rigid-Lock Fail-Safe QuickBerm 12 ft x 26 ft x 1 ft Kit Rigid-Lock Fail-Safe QuickBerm 12 ft x 30 ft x 1 ft Kit Small gensets/ POL storage 15K-60K generators/ POL storage 100K generators/ POL storage 5 and 7 ton with fuel pods 5 or 7 ton with fuel pods 179 gal 748 gal 1196 gal 2333 gal 2692 gal Package includes: (1) Rigid-Lock Fail-Safe QuickBerm, (2) ground protection mats, (2) track protection mats, Petro-Pipe and (1) deluxe repair kit Rigid-Lock Fail-Safe QuickBerm 12 ft x 36 ft x 1 ft Kit HEMTT 2,500 gallon fuel tanker 3231 gal Rigid-Lock Fail-Safe QuickBerm 14 ft x 54 x 1 ft Kit Rigid-Lock Fail-Safe QuickBerm 14 ft x 56 ft x 1 ft Kit 5,000 gallon tanker 5654 gal 5,000 gallon tanker 5864 gal Rigid-Lock Fail-Safe QuickBerm NSN Description Application Rigid-Lock Fail-Safe QuickBerm 4 ft x 6 ft x 1 ft Small generators/ POL storage 179 gal Rigid-Lock Fail-Safe QuickBerm 10 ft x 10 ft x 1 ft 15K-60K generators/ POL storage 748 gal Rigid-Lock Fail-Safe QuickBerm 10 ft x 16 ft x 1 ft 100K generators/ POL storage 1196 gal Rigid-Lock Fail-Safe QuickBerm 12 ft x 26 ft x 1 ft Rigid-Lock Fail-Safe QuickBerm 12 ft x 30 ft x 1 ft 5 and 7 ton with fuel pods 2333 gal 5 or 7 ton with fuel pods 2692 gal Rigid-Lock Fail-Safe QuickBerm 12 ft x 36 ft x 1 ft HEMTT 2,500 gallon fuel tanker 3231 gal Rigid-Lock Fail-Safe QuickBerm 14 ft x 54 ft x 1 ft Rigid-Lock Fail-Safe QuickBerm 14 ft x 56 ft x 1 ft 5,000 gallon tanker 5654 gal 5,000 gallon tanker 5864 gal Extended Drip Berm NSN Description Application Extended Drip Berm 24 ft x 36 in Drip containment under equipment 2 gal All-Terrain Berm NSN Description Application All-Terrain Berm for 20K bladder 36 ft x 36 ft x 3 ft All-Terrain Berm for 50K bladder 36 ft x 80 ft x 3 ft 20,000 gallon bladder 29,082 gal 50,000 gallon bladder 64,627 gal 4

5 Spill Berm Guard NSN Description Application ft x 10 ft Spill berm guard Berm protection ft x 16 ft Spill berm guard Berm protection ft x 26 ft Spill berm guard Berm protection ft x 30 ft Spill berm guard Berm protection ft x 36 ft Spill berm guard Berm protection ft x 54 ft Spill berm guard Berm protection ft x 56 ft Spill berm guard Berm protection ft x 6 ft Spill berm guard Berm protection ft x 10 ft Spill berm guard Berm protection ft x 16 ft Spill berm guard Berm protection NSN NUMBER SUMMARY GUIDE ft x 26 ft Spill berm guard Berm protection ft x 30 ft Spill berm guard Berm protection ft x 36 ft Spill berm guard Berm protection ft x 54 ft Spill berm guard Berm protection ft x 56 ft Spill berm guard Berm protection Petro-Pipe (complete) Hydrocarbon filter/plug Deluxe repair kit Repair of berm material Modular Channel QuickBerm Components NSN Description Application Modular Channel QuickBerm 4 ft x 2 ft x 8 in middle section Modular component part Modular Channel QuickBerm 4 ft x 6 ft x 8 in middle section Modular component part Modular Channel QuickBerm 4 ft x 10 ft x 8 in middle section Modular component part Modular Channel QuickBerm 4 ft x 20 ft x 8 in middle section Modular component part Modular Channel QuickBerm 4 ft x 20 ft x 8 in earthen berm section Modular component part Modular Channel QuickBerm 8 ft x 8 ft x 8 in intersection Modular component part Modular Channel QuickBerm 8 ft x 8 ft x 8 in intersection extension Modular component part Modular Channel QuickBerm 14 ft x 14 ft x 8 in intersection extension Modular component part Modular Channel QuickBerm 14 ft x 14 ft x 8 in intersection Modular component part Modular Channel QuickBerm 4 ft x 6 ft x 8 in right angle section Modular component part Modular Channel QuickBerm 4 ft x 2 ft end cap Modular component part Modular Channel QuickBerm Fail-Safe 3-sided drive-thru Modular component part Modular Channel QuickBerm 12 ft x 24 ft x 8 in pump/tank containment Modular component part Modular Channel QuickBerm section connection adapter Modular component part Modular Channel QuickBerm field maintenance kit Modular system maintenance Modular Channel QuickBerm 45 in x 48 in knockdown storage box Modular system storage box Sentry Lite NSN Description Application Sentry Lite, 18 oz tan vinyl, 4 ft x 6 ft x 8 in Spill overflow protection, personnel decon 119 gal Sentry Lite, 18 oz tan vinyl, 6 ft x 6 ft x 8 in Spill overflow protection, personnel decon 179 gal

6 DRIVE-THROUGH BERMS Rigid-Lock Fail-Safe QuickBerm Heavy-duty construction provides longterm spill containment for vehicles, heavy equipment, tankers, and more Single-piece construction patented Rigid-Lock wall-support system integral to berm provides unobstructed work space. Provides faster deployment stronger structural integrity. Quick and easy setup no assembly required. Heavy-duty BC3CF fabric stands up to corrosive solvents and extended wear.»fail-safe» flotation device on entry/exit walls, enabling drive-in and drive-out with no need to raise or lower wall. Rigid-Lock wall supports, when in the upright and locked position, prevent snow and ice from interfering during a spill occurrence. Reinforced, wraparound design prevents seam leaks for fluid-tight reliability. No assembly needed saves time, ready in minutes! Fail-Safe flotation device incorporated on entry/exit walls. Unfold berm, exposing supports in flat position. A simple tug locks supports in upright position. Fully deployed for quick spill readiness! Clean lines of the berm with no obstruction either on the berm interior or exterior. The ingenious built-in Rigid-Lock Fail-Safe QuickBerm wall design deploys instantly while minimizing drive-over damage and tripping hazards. 6

7 Rigid-Lock Fail-Safe QuickBerm (Continued) The Rigid-Lock Fail-Safe QuickBerm offers superior protection and chemical resistance against the harshest of liquids, including petroleum, oils, greases, and most acids. Unlike floating-wall-type berms that are susceptible to wall collapse and containment failure, the patented Rigid-Lock design features a stainless steel brace that supports the wall at a full 90 locked position for secure, leakproof containment. A simple push on the walls unlocks the support and lays the wall down for drive-through capability from any angle. The end walls also feature the patented Fail-Safe flotation device that allows the user to leave the entry/exit walls in the down position, weather permitting. This feature enables the walls to auto-deploy to the upright position using the dynamics of fluid pressure to push the wall up without allowing a spill event. The end walls also include the Rigid-Lock support with locking detent to keep the end walls upright should snow or ice be forecasted. reduce any tripping hazard on the berm perimeter. Reinforced CriticalCorner design with wraparound diagonal radio frequency welds offers exceptionally strong structural integrity to prevent seam leaks, provide fluid-tight reliability, and extend berm life expectancy. Finished hem edge on top of sidewall prevents fraying and adds strength. Each support includes a heavy-duty brass grommet for anchoring the berm under high wind conditions. Anchor stakes are not included. Helps comply with EPA for containment and spill prevention (SPCC). CriticalCorner Construction Fail-Safe flotation device on both the entry and exit walls is self-erecting and will rise as the fluid level rises. The entry/exit walls also have the Rigid-Lock brace support, which will lock into position with the rising fluid level. DRIVE-THROUGH BERMS The built-in Rigid-Lock wall supports maximize usable space inside the berm and greatly Patented Rigid-Lock Mechanism Folded Rigid-Lock Fail-Safe QuickBerm securely attached to the HEMTT tanker for deployment at a moment s notice. NSN Dimensions W x L x H 4 ft x 6 ft x 1 ft 1.2 m x 1.8 m x 0.3 m 10 ft x 10 ft x 1 ft 3.0 m x 3.0 m x 0.3 m 10 ft x 16 ft x 1 ft 3.0 m x 4.9 m x 0.3 m 12 ft x 26 ft x 1 ft 3.7 m x 7.9 m x 0.3 m 12 ft x 30 ft x 1 ft 3.7 m x 9.1 m x 0.3 m 12 ft x 36 ft x 1 ft 3.7 m x 11.0 m x 0.3 m 14 ft x 54 ft x1 ft 4.3 m x 16.5 m x 0.3 m 14 ft x 56 ft x 1 ft 4.3 m x 17.1 m x 0.3 m Weight Folded Size Part No Application 179 gal 678 L 748 gal 2832 L 1196 gal 4527 L 2333 gal 8831 L 2592 gal 9812 L 3231 gal 12,231 L 5654 gal 21,403 L 5864 gal 22,198 L 28 lbs 13 kg 69 lbs 42 kg 92 lbs 42 kg 147 lbs 67 kg 164 lbs 74 kg 190 lbs 86 kg 296 lbs 134 kg 305 lbs 138 kg 30 in x 30 in x 6 in 762 mm x 762 mm x 152 mm 30 in x 30 in x 12 in 762 mm x 762 mm x 305 mm 30 in x 30 in x 12 in 762 mm x 762 mm x 305 mm 36 in x 36 in x 12 in 914 mm x 914 mm x 305 mm 36 in x 36 in x 16 in 914 mm x 914 mm x 406 mm 36 in x 36 in x 16 in 914 mm x 914 mm x 406 mm 42 in x 36 in x 18 in 1067 mm x 914 mm x 457 mm 42 in x 36 in x 18 in 1067 mm x 914 mm x 457 mm See page 14 for ground and track mats to provide extra resistance against rocky surfaces or heavy in-out traffic use. BC3CF-RLFS-0406 SPILL BERM BC3CF-RLFS-1010 SPILL BERM BC3CF-RLFS-1016 SPILL BERM BC3CF-RLFS-1226 SPILL BERM BC3CF-RLFS-1230 SPILL BERM BC3CF-RLFS-1236 SPILL BERM BC3CF-RLFS-1454 SPILL BERM BC3CF-RLFS-1456 SPILL BERM Small generators /POL storage 15-60K generators/pol 100K generator 5- or 7-ton truck with fuel pods 5- or 7-ton truck with fuel pods 2500-gal HEMTT 5000-gal tanker 5000-gal tanker

8 DRIVE-THROUGH BERMS Rigid Containment System (RCS) Rugged, leakproof steel containment for heavy-duty equipment Each system is water-tested and certified as leakproof. Fuel-compatible protective coating resists corrosion and will not delaminate from the steel plate. No assembly required simply position and drive equipment on it or over it. Slip-resistant interior surface. Heavy-duty, single-piece construction provides long-term, superior spill protection for vehicles and heavy equipment, such as fuel trucks and fuel pods. Each RCS provides the highest level of protection for even the toughest indoor and outdoor applications. The fully tested, innovative design eliminates the risk of gasket failures and allows you to relocate or reposition the unit without disassembly. An optional integrated exterior ramp allows you to customize the unit to your needs. New optional integrated exterior ramp. Contains fuel trucks as well as fuel pods. Innovative design requires no assembly during setup and no disassembly to relocate. Dimensions W x L x H Part No Application 12 ft x 30 ft x 10 in 4 m x 9 m x 254 mm 2000 gal 7571 L RCS360/144/10INTR 5- or 7-ton tanker 12 ft x 40 ft x 10 in 4 m x 12 m x 254 mm 2800 gal 10,599 L RCS480/144/10INTR 2500-gal HEMTT 12 ft x 80 ft x 10 in 4 m x 24 m x 254 mm 5600 gal 21,198 L RCS960/144/10INTR 5000-gal tanker The 12-foot-by-80-foot-by-10-inch unit is comprised of two 12-foot-by-40-foot-by-10-inch units that are attached together. 8

9 Expandable Containment Pad (ECP) Economical and durable containment for a variety of applications ¼-in-thick steel construction with heavy-duty epoxy surface coating with grit finish for slip resistance. The modular design allows you to expand the unit. The ECP is available in 1-ft increment widths up to 50-ft and unlimited lengths. Designed for low ground clearance vehicles in loading/unloading rack; equipment storage; tanker truck secondary containment; and maintenance pad applications. More economical than pouring or sealing concrete; more durable than flexible berms. Containment can be relocated or expanded in size at later date. All four corners feature 1½-in drains outfitted to receive ball valves or plumbing to a fuel water separator (not included). SPECIALTY SOLUTIONS

10 SPECIALTY SOLUTIONS Modular Channel QuickBerm Portable, liquid-tight containment for hoses and pipes Flexible modular design allows you to form any configuration. Standard 4-ft width custom sizes available. No assembly required sets up easily in the field. Proprietary design with input from the U.S. military. The Modular Channel QuickBerm s folding brace system features supports that lock the wall in an 8-in-tall, 90 vertical position when deployed. The inclined leg support is only 1.5-in from the ground for mobility and ease of use. Simply pull up on the perimeter wall and the unit will lock into a vertical position. To lower the wall, push in on it and the lock will release, allowing the Modular Channel QuickBerm to lie flat on the floor. Each section has open ends and tongue-and-groove closures that form a liquid-tight closure. Sections attach quickly with a state-of-the-art LiquidSeal resealable connection that provides a liquid-tight closure. NSN Description Modular Channel QuickBerm middle section Modular Channel QuickBerm middle section Modular Channel QuickBerm middle section Modular Channel QuickBerm middle section Modular Channel QuickBerm earthen berm section Modular Channel QuickBerm intersection Modular Channel QuickBerm intersection extension Modular Channel QuickBerm intersection extension Modular Channel QuickBerm intersection Modular Channel QuickBerm right angle section Modular Channel QuickBerm end cap Modular Channel QuickBerm Fail-Safe 3-sided drive-thru Modular Channel QuickBerm pump/tank containment Dimensions W x L x H 4 ft x 2 ft x 8 in 1.2 m x 0.6 m x 203 mm 4 ft x 6 ft x 8 in 1.2 m x 1.8 m x 203 mm 4 ft x 10 ft x 8 in 1.2 m x 3.0 m x 203 mm 4 ft x 20 ft x 8 in 1.2 m x 6.1 m x 203 mm 4 ft x 20 ft x 8 in 1.2 m x 6.1 m x 203 mm 8 ft x 8 ft x 8 in 2.4 m x 2.4 m x 203 mm 14 ft x 14 ft x 8 in 4.3 m x 4.3 m x 203 mm 14 ft x 14 ft x 8 in 4.3 m x 4.3 m x 203 mm 14 ft x 14 ft x 8 in 4.3 m x 4.3 m x 203 mm 4 ft x 6 ft x 8 in 1.2 m x 1.8 m x 203 mm 4 ft x 2 ft 1.2 m x 0.6 m 12 ft x 14 ft x 1 ft 3.7 m x 4.3 m x 0.3 m 12 ft x 24 ft x 8 in 3.7 m x 7.3 m x 203 mm Application Modular component part Modular Channel QuickBerm section connector adapter Modular Channel QuickBerm field maintenance kit Field maintenance kit Modular Channel QuickBerm knockdown storage box 45 in x 48 in 1143 mm x 1219 mm Modular system storage box 10

11 All-Terrain Berm Portable solution for fuel bladder containment Designed for field deployment no tools required. Deploys quickly and easily without heavy equipment. Quick-set aluminum A-frame support. 3-ft-tall walls. Optional WaveGuard for splashout prevention. SPECIALTY SOLUTIONS Five people can assemble the heavy-duty All-Terrain Berm in the field in less than an hour even on the most demanding terrain. Designed for the utmost flexibility and security, the berm adapts to the contour of the ground. The All-Terrain Berm contains fuel bags and bladders, metal storage tanks, transformers, waste materials and many other products. Field application of the All-Terrain Berm containing a flexible fuel tank. The All-Terrain Berm can be field-deployed by five people in 45 minutes on rough terrain. The individual aluminum A-frames enable the unit to adapt to the contour of the ground. The All-Terrain Berm is for containing fuel bags and bladders of all sizes. Other uses include containing metal storage tanks, transformers and waste products. NSN Dimensions W x L x H 20 ft x 20 ft x 3 ft 6.1 m x 6.1 m x 0.9 m Part No Application 3000 gal 11,356 L BCI-ATB-3K ft x 28 ft x 3 ft 8.5 m x 8.5 m x 0.9 m 36 ft x 36 ft x 3 ft 11.0 m x 11.0 m x 0.9 m 36 ft x 80 ft x 3 ft 11.0 m x 24.4 m x 0.9 m 10,000 gal 37,854 L 20,000 gal 75,708 L 50,000 gal 189,271 L BCI-ATB-10K BCI-ATB-20K BCI-ATB-50K Secondary containment of fuel bladders and bags; metal storage tanks; transformers; waste materials; and other products 100 ft x 100 ft x 3 ft 30.5 m x 30.5 m x 0.9 m 210,000 gal 794,937 L BCI-ATB-210K

12 LIGHT-DUTY BERMS Decon QuickBerm One berm handles multiple operations simultaneously Interior walls form multiple zones for different solutions. 2, 3, or 4 washdown zones. Inside or outside brace support design deploys in seconds. Perfect for decon showers and washdown applications. Optional grating elevates personnel above the fluid. For emergency deployment, these multi-stage berms with patented interior walls create washdown zones that safely capture and contain contaminated solutions. Select from two-, three-, or four-zone models. Watertight, lightweight PVC coated fabric provides wide range of chemical resistance. The 8-in (203-mm) walls allow for easy entry and exit of the compartments. One ¾-in GHT drain fitting per zone. Order optional grates to keep personnel above liquid. Decon QuickBerm in use during the 2001 anthrax attack on the U.S. Capitol. Multiple interior walls, each with inside brace support system, enable you to accommodate up to four separate solutions at the same time. The optional decon grating elevates personnel above the fluid. Dimensions W x L x H Weight Folded Size Part No Application 6 ft x 10 ft x 8 in (2 zone) 1.8 m x 3.0 m x 203 in 24 lbs 11 kg 20 in x 20 in x 4 in 508 mm x 508 mm x 102 mm 2 CPT - SPILL BERM Personnel decon 6 ft x 16 ft x 8 in (3 zone) 1.8 m x 4.9 m x 203 in 32 lbs 15 kg 20 in x 20 in x 5 in 508 mm x 508 mm x 127 mm 3 CPT - SPILL BERM Personnel decon 6 ft x 20 ft x 8 in (4 zone) 1.8 m x 6.1 m x 203 in 40 lbs 18 kg 20 in x 20 in x 6 in 508 mm x 508 mm x 152 mm 4 CPT - SPILL BERM Personnel decon Decon Grating Keep personnel and parts away from fluids and contaminants Durable, anti-slip grates help keep personnel and other objects above contaminated washdown water. For use with Decon Berm QuickBerm, Sentry Lite, and Maintenance Spill Pad. Available in 2-ft x 2-ft and 2-ft x 4-ft sizes. Made of chemical resistant, easy-to-clean, polyethylene. 12

13 Sentry Lite Portable, versatile containment berm deploys quickly Made of tough but lightweight 18-ounce vinyl coated fabric. Easy handling, fast deployment. Inside brace support eliminates tripping hazards. Built for smaller containment needs. Packs quickly and folds down to a compact storage size. LIGHT-DUTY BERMS Leakproof, tough vinyl coated fabric provides broad UV and chemical resistance that withstands repeated usage. Reinforced inside supports reduce sagging and prevent tripping hazards that can be caused by outside supports. Lightweight berm folds down easily to a small size for storage in trucks, emergency vehicles, and spill kits. Add optional grates to help reduce contact with contaminated liquids by personnel or equipment. Helps comply with EPA for containment and spill prevention (SPCC). Single-piece, lightweight construction makes Sentry Lite effortless to deploy in the field and allows it to fold to a compact storage size. NSN Dimensions W x L x H 4 ft x 4 ft x 8 in 1.2 m x 1.2 m x 203 mm Folded Size Weight Part No Application 8 in x 11 in x 5 in 203 mm x 279 mm x 127 mm 79 gal 299 L 6 lbs 3 kg SL-44 SPILL BERM Personnel decon (tan) 4 ft x 6 ft x 8 in 1.2 m x 1.8 m x 203 mm 8 in x 11 in x 6 in 203 mm x 279 mm x 152 mm 119 gal 450 L 8 lbs 4 kg SL-46 SPILL BERM Personnel decon 4 ft x 8 ft x 8 in 1.2 m x 2.4 m x 203 mm 8 in x 11 in x 7 in 203 mm x 279 mm x 178 mm 159 gal 602 L 5 lbs 11 kg SL-48 SPILL BERM Personnel decon (tan) 6 ft x 6 ft x 8 in 1.8 m x 1.8 m x 203 mm 11 in x 11 in x 8 in 279 mm x 279 mm x 203 mm 179 gal 678 L 18 lbs 8 kg SL-66 SPILL BERM Personnel decon 8 ft x 8 ft x 8 in 2.4 m x 2.4 m x 203 mm 11 in x 14 in x 8 in 279 mm x 356 mm x 203 mm 318 gal 1204 L 20 lbs 9 kg SL-88 SPILL BERM Personnel decon 8 ft x 10 ft x 8 in 2.4 m x 3.0 m x 203 mm 11 in x 14 in x 18 in 279 mm x 356 mm x 457 mm 398 gal 1507 L 23 lbs 10 kg SL-810 SPILL BERM Personnel decon

14 BERM ACCESSORIES Ground and Track Berm Guards Improve berm longevity without sacrificing functionality Available in heavy-duty coated polyester or for infrequent use, in economical and lightweight coated vinyl. Non-absorbent material won t get soggy. Use with all drive-through berms. Ground mats Create a smooth, uniform deployment area with this heavy-duty woven fabric. Place under berm for improved wear resistance. NSN Dimensions W x L x H 3 ft x 10 ft Spill berm guard 0.9 m x 3.0 m 3 ft x 16 ft Spill berm guard 0.9 m x 4.9 m 3 ft x 26 ft Spill berm guard 0.9 m x 7.9 m 3 ft x 30 ft Spill berm guard 0.9 m x 9.1 m Description Track mats Application Interior berm protection Track mats Protection inside the berm for extra protection along tire paths. Thick, durable black woven fabric protects floors and walls from abrasion caused by skidding, turning, and braking ft x 36 ft Spill berm Guard 0.9 m x 11.0 m 3 ft x 54 ft Spill berm guard 0.9 m x 16.5 m 3 ft x 56 ft Spill berm guard 0.9 m x 17.1 m ft x 6 ft Spill berm guard 1.2 m x 1.8 m ft x 10 ft Spill berm guard 1.8 m x 3.0 m ft x 16 ft Spill berm guard 1.8 m x 4.9 m ft x 26 ft Spill berm guard 1.8 m x 7.9 m 6 ft x 30 ft Spill berm guard 1.8 m x 9.1 m Ground mats Under berm protection ft x 36 ft Spill berm guard 1.8 m x 11.0 m ft x 54 ft Spill berm guard 1.8 m x 16.5 m Light-duty ground and track berm guards used for lighter weight vehicles ft x 56 ft Spill berm guard 1.8 m x 17.1 m Petro-Pipe NSN# (For use with flexible containment). Drains rainwater from your berm without allowing harmful hydrocarbons to escape Use with all berm models. Patented system allows water to drain while trapping hydrocarbon-based fuels and oils. Eliminates need to manually drain berm after rainstorm. Shuts off automatically when completely saturated. 14

15 Drip Berms Capture small oil leaks and drips before they contaminate the ground or create unsafe work surfaces Made from UV and chemical resistant modified PVC. Replaceable inner pad absorbs a total of 5 quarts. Coated mesh outer layer traps coarse debris. Lightweight, flexible, and portable great for containing small oil drips from leaky vehicles, industrial machinery equipment, hydraulic lines, pipes, and drums. Weighted bottom holds berm in place in winds up to 50 mph. AROUND THE SHOP These drip pads feature replaceable, oil-only sorbent within a welded leakproof barrier. Rated for drive-over applications, pads include brass grommets in opposing corners for anchoring. Anchoring stakes not included. Pads come in two sizes; extended model is weighted to keep it down in high winds. Outer shell is reusable with optional refill sorbent packs. Helps comply with EPA for spill prevention (SPCC). Regular Drip Berm 21-in x 23-in. Drip Berm with attached chock block. Position drip pad in tight spaces between machinery to capture oily leaks. Extended Drip Berm 24-in x 36-in. NSN Footprint Weight Folded Size Part No Application 16 in x 24 in 406 mm x 610 mm 4 quarts 4L 1.5 lbs 1 kg n/a BCI DB-16 Drip Spill Berm 21 in x 23 in 533 mm x 584 mm 22 in x 22 in weighted 559 mm x 559 mm 22 in x 22 in weighted w/ chock block 559 mm x 559 mm 5 quarts 5L 5 quarts 5L 5 quarts 5L 2 lbs 1 kg 5 lbs 2 kg 12 lbs 5 kg n/a n/a n/a BCI DB-21 DRIP SPILL BERM BCI DB-22 DRIP SPILL BERM BCI-DB-22-CHK Pipe or line drips, fluid transfer, vehicle maintenance in x 36 in weighted 610 mm x 914 mm 7 quarts 7L 7 lbs 3 kg 12 in x 24 in 305 mm x 610 mm BCI EXT-DB DRIP SPILL BERM

16 AROUND THE SHOP Battery/Maintenance Spill Pads Compact and flexible spill containment deploys instantly in the shop or field No assembly required simply unfold and use. 2½-inch drive-over walls made of coated vinyl urethane foam. Lightweight 18-ounce fabric is ideal for battery storage. Also available in heavy-duty 30-ounce modified vinyl for maintenance applications. Optional grate elevates products above fluid. Quickly contain minor spills and leaks during temporary storage of drums, machine parts, batteries, and equipment. Lightweight PVC coated fabric provides broad UV and chemical resistance. Anchor berm in place using the brass grommets in each corner. Anchor stakes not included. Order optional grates to keep products and machinery above fluid. Helps comply with EPA for spill prevention (SPCC). Roll-over sidewalls offer easy drum placement foam walls quickly spring back for secure containment. Custom sizes are available. The speed-bump design of the urethane foam walls allows for easy entry/exit with no memory loss. Footprint Weight Folded Size Part No Application 2 ft X 2 ft X 2 in 0.6 m x 0.6 m x 51 mm 5 gal 19 L 3 lbs 1 kg 24 in x 24 in x 2 in 610 mm x 610 mm x 51 mm SPILL PAD-22 Battery and parts storage 2 ft x 4 ft x 2 in 0.6 m x 1.2 m x 51 mm 10 gal 38 L 5 lbs 2 kg 24 in x 24 in x 4 in 610 mm x 610 mm x 102 mm SPILL PAD-24 Fluid transfer 4 ft x 4 ft x 2 in 1.2 m x 1.2 m x 51 mm 15 gal 57L 7 lbs 3 kg 28 in x 28 in x 10 in 711 mm x 711 mm x 254 mm SPILL PAD-44 Drum storage 16

17 Sentry Oil-Only Spill Kits 20 Gallon Spill Kit Kit Contents: (25) 15 in x 19 in Pads (4) 3 in x 4 ft Socks (2) 18 in x 18 in Pillows (3) Yellow Disposal Bags (1) Pair Nitrile Gloves (1) Pair Safety Goggles (1) Spill Kit Label Part# BCI-20 Spill Kit 30 Gallon Spill Kit Kit Contents: (25) 15 in x 19 in Pads (4) 3 in x 4 ft Socks (4) 18 x 18 in Pillows (3) Yellow Disposal Bags (1) Pair Ntirile Gloves (1) Pair Safety Goggles (1) Spill Kit Label (1) Emergency Response Guidebook Part# BCI-30 Spill Kit AROUND THE SHOP 50 Gallon Spill Kit Kit Contents: (100) 15 in x 19 in Pads (6) 3 in x 4 ft Socks (4) 18 in x 18 in Pillows (10) Yellow Disposal Bags (2) Pair Nitrile Gloves (1) 7 in Epoxy Putty Stick (1) 6 in Light Stick (1) Pair Safety Goggles (1) Spill Kit Label (1) Emergency Response Guidebook Part# BCI-50W Spill Kit 65 Gallon Spill Kit Kit Contents: (40) 15 in x 19 in Pads (6) 3 in x 8 ft Socks (10) 3 in x 4 ft Socks (6) 18 in x 18 in Pillows (2) Pair Nitrile Gloves (6) Yellow Disposal Bags (1) Spill Kit Label Part# BCI-65 Spill Kit 95 Gallon Spill Kit Kit Contents: (150) 15 in x 19 in Pads (12) 3 in x 4 ft Socks (7) 18 in x 18 in Pillows (2) Pair Nitrile Gloves (3) Tubs Plug & Dike (10) Yellow Disposal Bags (6) 3 in x 8 ft Socks (1) Spill Kit Label (1) Pair Goggles (1) Emergency Response Guidebook Part# BCI-95 Spill Kit Duffel Bag Spill Kit Kit Contents: (10) 3 in x 4 ft Socks (1) Emergency Response Guidebook (2) Yellow Disposal Bags (1) Pair Nitrile Gloves (1) 2 lb. box of acid neutralizer Part# BCI-DB Spill Kit

18 STRUCTURED SPILL CONTAINMENT AND RECYCLING Sentry Accumulation Centers and Ramp Combine units to create your own customized spill-control system Low-profile centers only measure 5½-in (140-mm) high for easy handling of drums. Made with 100% recycled polyethylene, these accumulation centers are nearly impervious to chemicals, including acids and corrosives. Seamless construction eliminates leaks, making them ideal for drum filling and dispensing operations. Self-locating grates won t ride up, and are removable for easy cleaning. Combine 2-, 4-, 6-, and 8-drum modular units to create your own customized system. Use the optional joining clips to firmly lock units together. Sumps remain separate and clips can be removed for easy repositioning. The 6- and 8-drum center models are EPA compliant, support SPCC, and meet NFPA edition and IFC fire codes. Use optional Sump-to-Sump drain kit (includes joining clips and transfer tube) for applications requiring a continuous sump. Kit allows you to join centers together, on-site, for full compliance with regulations when sump capacities reach 71-gal (270-L). Kit includes one pair stainless steel joining clips, one pair rubber grommets, one polytetrafluoroethylene (PTFE) transfer tube. (Patent No US 6,622,879,B1) Companion Ramp Load and unload heavy drum with ease. Anti-skid ribs provide maximum safety. Place the ramp anywhere on accumulation centers size 2-drum or larger. Description Sump Load-bearing External Dim. W x D x H Compliance Model No Ship Wt 1-drum center 12 gal 45 L 1250 lbs 567 kg 25 in x 25 in x 5.5 in 635 mm x 635 mm x 140 mm lbs 8 kg 2-drum center 24 gal 90 L 2500 lbs 1134 kg 49 in x 25 in x 5.5 in 1245 mm x 635 mm x 140 mm lbs 15 kg 4-drum center 49 gal 185 L 5000 lbs 2268 kg 49 in x 49 in x 5.5 in 1245 mm x 1245 mm x 140 mm lbs 28 kg 6-drum center 8-drum center 73 gal 276 L 98 gal 371 L 7500 lbs 3402 kg 10,000 lbs 4536 kg 73 in x 49 in x 5.5 in 1854 mm x 1245 mm x 140 mm 97 in x 49 in x 5.5 in 2464 mm x 1245 mm x 140 mm E,S,O lbs 41 kg 122 lbs 55 kg Ramp for above 1000 lbs 455 kg 48 in x 33 in x 6.25 in 1219 mm x 838 mm x 159 mm lbs 19 kg Joining clips, one pair, stainless steel Sump-to-Sump drain kit 4 in x 2 in 102 mm x 51 mm lb 0.5 kg 18

19 Sentry Spill Control Pallets Keep workers safe from accidental slips indoors and avoid costly hazmat cleanup costs Protect against ground contamination. Comply with EPA and avoid potential fines. Made of molded 100% recycled polyethylene, these pallets resist chemical attack from hazardous acids, caustics and solvents. The oversized sump holds the contents of up to a 55-gal (200-L) drum in the event of leak or rupture meeting or exceeding the most stringent spill containment regulations. Seamless construction eliminates leaks. Self-locating grates lift off for quick cleanup. Black color hides grime and dirt to keep your workplace looking clean. Choose from square or in-line configurations. EPA compliant, supports SPCC, and meets NFPA edition and IFC fire codes. STRUCTURED SPILL CONTAINMENT AND RECYCLING Description Sump Load-bearing External Dim. W x D x H Compliance Model No Ship Wt 2-drum in-line pallet w/drain 66 gal 2500 lbs 49 in x 25 in x 18 in 250 L 1134 kg 1245 mm x 635 mm x 457 mm 2-drum in-line pallet lbs 20 kg 3-drum in-line pallet w/drain 75 gal 3750 lbs 73 in x 25 in x in 284 L 1701 kg 1854 mm x 635 mm x 295 mm 3-drum in-line pallet E,S,O drum square pallet w/drain 4-drum in-line pallet 4-drum square pallet 73 gal 276 L 75 gal 284 L 73 gal 276 L 5000 lbs 2268 kg 49 in x 49 in x in 1245 mm x 1245 mm x 260 mm 97 in x 25 in x 9 in 2464 mm x 635 mm x 229 mm 49 in x 49 in x in 1245 mm x 1245 mm x 260 mm lbs 26 kg 70 lbs 32 kg 77 lbs 35 kg 70 lbs 32 kg 4-drum in-line pallet w/drain 75 gal 284 L 97 in x 25 in x 9 in 2464 mm x 635 mm x 229 mm lbs 35 kg Ramp for 4-drum square pallet 1000 lbs 454 kg 49 in x 33 in x in 1245 mm x 838 mm x 267 mm lbs 18 kg Sentry Replacement Grates (100% recycled) 2-drum grate for all sizes above 1-drum grate for 3-drum in-line 24 in x 48 in x 2.5 in 610 mm x 1219 mm x 63 mm lbs 7 kg 8 lbs 4 kg

20 STRUCTURED SPILL CONTAINMENT AND RECYCLING Sentry IBC Pallet and Shed Reliable spill protection and safe storage for IBCs Compliant storage for popular 275- or 330-gal (1000- or 1250-liter) IBCs. Compact footprint with ergonomic working height. Constructed of durable 40% recycled polyethylene, these intermediate bulk container pallets offer excellent chemical resistance. They accept IBCs up to 48-in W x 48-in D x 53-in H (1219-mm W x 1219-mm D x 1346-mm H). Large leakproof sump exceeds regulations and protects against high-volume spills. Sturdy pillar supports accept up to 9,000-lb (4082-kg) uniformly distributed load. Removable pillars make for easy sump cleanup. Pallet features forklift pockets for relocation when empty. Ships fully assembled. EPA compliant, supports SPCC, and meets NFPA edition and IFC fire codes. Description IBC indoor pallet IBC outdoor shed w/pallet Recycled Content 40% Sump 372 gal 1408 L Load-bearing 9000 lbs 4082 kg External Dim. W x D x H Compliance Model No Ship Wt 55 in x 55 in x in 1397 mm x 1397 mm x 952 mm in x in x in 1543 mm x 1740 mm x 2635 mm E,S,O lbs 162 kg 621 lbs 282 kg 20

21 Sentry DrumSheds Safe, secure, and compliant outdoor storage for drums Weather-resistant DrumSheds are made of eco-friendly, 50% recycled polyethylene. Convenient roll-top doors allow access from front or rear. A wide, 52-in (1321-mm) door opening accepts palletized loads. Fully compliant, leakproof pallet sump has removable, durable deck grating for easy cleanup of spills. A spacious interior offers ample headroom for adding funnels or pumps. Safety features include grounding capability, integral anchor bolt locations for wind resistance, and molded lugs to accept padlocks for security. Forklift pockets at the front and back make it easy to relocate empty sheds. Ships fully assembled. Pallets (without shed) also available. Low Line Pallets (without shed) also available. Two-drum and 4-drum sizes feature ergonomic, low 9-in (229-mm) working height. EPA compliant, supports SPCC, and meets NFPA edition and IFC fire codes. STRUCTURED SPILL CONTAINMENT AND RECYCLING Description Recycled Content Sump Load-bearing External Dim. W x D x H Compliance Model No Ship Wt 2-drum DrumShed 4-drum DrumShed 50% 67 gal 254 L 79 gal 301 L 2500 lbs 1134 kg 5000 lbs 2268 kg in x in x in 1543 mm x 1486 mm x 1911 mm in x in x in 1543 mm x 1740 mm x 1911 mm E,S,O lbs 133 kg 343 lbs 156 kg Ramp - Black 100% -Black lbs 48 in x in x in 455 kg 1219 mm x 1518 mm x 286 mm Ramp - Yellow 0% - Yellow lbs 30 kg Low Line Pallet - 2 drum Low Line Pallet - 4 drum 100% 67 gal 254 L 79 gal 301 L 2500 lbs 1134 kg 5000 lbs 2268 kg 55 in x 45 in x 9 in 1397 mm x 1143 mm x 229 mm 55 in x 55 in x 9 in 1397 mm x 1397 mm x 229 mm E,S,O lbs 31 kg 89 lbs 40 kg

22 STRUCTURED SPILL CONTAINMENT AND RECYCLING Spill Trays Lightweight and low-profile design for small-scale spill control Made of 100% recycled polyethylene, these eco-friendly spill trays will not rust or corrode. Raised rib bottom adds rigidity and keeps contents out of spills perfect for pouring and filling applications. Rated for service temperatures between -30 to 120 F (-34 to 49 C). Sump 12 gal 45 L 20 gal 75 L 23 gal 87 L External Dim. W x D x H 46 in x 16 in x 5.50 in 1168 mm x 406 mm x 139 mm 38 in x 26 in x 5.50 in 965 mm x 660 mm x 139 mm in x 23 in x 5.50 in 1206 mm x 603 mm x 139 mm in x 34 in x 5.50 in 959 mm x 867 mm x 139 mm Compliance Model No Ship Wt lbs 2 kg 6 lbs 3 kg 29 gal 109 L 47 in x 33 in x 5.50 in 1194 mm x 838 mm x 139 mm lbs 4 kg 22

23 Aerosolv Aerosol Can Disposal System Safely recycle aerosol cans while reducing disposal costs and minimizing waste Save thousands of dollars on hazardous waste disposal costs. Turn aerosol cans into recyclable steel save on landfill space for a cleaner environment. The Aerosolv system safely converts spent aerosol cans from solid hazardous waste to a non-hazardous material. It accepts industry standard sized cans with a maximum height of 8½-in (215-mm) and threads directly into a standard 2-in (51-mm) bung on a 30- (110-L) or 55-gal (200-L) drum. Body is made of low-maintenance aluminum and all moving parts are 308 stainless steel. A non-sparking pin punctures the can, and the residual liquids flow into the collection drum. One 55-gal (200-L) drum holds approximately 4,200 spent aerosol cans. Punctured, discharged cans do not meet the definition of hazardous waste per EPA 40 CFR (a)(6), and thus can be treated as recyclable scrap metal. System includes a combination filter, safety goggles, and an anti-static ground wire with alligator clip. EPA compliant. Replacement filters are available in either color-changing style or economical, noncolor-changing style. Description Aerosolv Shipping Dim. W x D x H 18 in x 18 in x 7 in 457 mm x 457 mm x 178 mm Compliance Model No Ship Wt E lbs 5 kg STRUCTURED SPILL CONTAINMENT AND RECYCLING Aerosolv Super System Certified by the EPA s Environmental Technology Verification Program (ETV) Built-in counter tracks number of cans punctured. Protective coating for easy cleaning. Aerosolv Super System offers all the features of the original Aerosolv system, plus greater vapor reduction, easy tracking, and added security. Lockout and shut-off mechanism seals the system and drum when not in use to eliminate the escape of hazardous vapors to meet OSHA requirements. Easily comply with your ISO program using the built-in counter. Includes a combination coalescing/saturation indicating carbon filter, a padlock with key, anti-static ground wire with C-clamp, and safety goggles. EPA compliant and ETV certified. Description Aerosolv Super System with Counter Shipping Dim. W x D x H 18 in x 18 in x 7 in 457 mm x 457 mm x 178 mm Compliance Model No Ship Wt E,V lbs 5 kg

24 SAFETY CABINETS Sentry Classic Safety Cabinets for Flammables Safety Cabinets offer safe, dependable flammable liquid storage and protection Protect workers, reduce fire risks, and improve productivity by storing flammable fuels and chemicals in code-compliant Safety Cabinets. Designed to meet OSHA and NFPA 30 standards, cabinets are constructed of sturdy 18-gauge (1-mm) thick double-wall, welded steel with 1½-in (38-mm) of insulating air space for fire resistance. High-performance, self-latching doors close easily and securely for maximum protection under fire conditions. Failsafe closing mechanism ensures the three-point stainless steel bullet latching system works every time. For added security, the paddle handle comes with a cylinder lock and key set or accepts an optional padlock. Patented spill catching galvanized steel shelves direct spills to the back and bottom of a leakproof sump. They adjust on 3-in (76-mm) centers for versatile storage. Cabinets also feature a leakproof 2-in (51-mm) bottom sump; dual vents with flame arresters; four adjustable self-leveling feet; a grounding connector; and a trilingual warning label. Durable lead-free epoxy/polyester powder-coat finish provides excellent chemical resistance. All cabinets are FM-approved and come with a 10-year warranty. Self-closing models also meet NFPA 1 and the International Fire Code. They shut and latch automatically when a fusible link melts at 165 F (74 C) under fire conditions. Unique, concealed self-closing mechanism offers obstruction-free access to contents inside the cabinets. 24

25 Sentry Classic Safety Cabinets for Flammables (Continued) SAFETY CABINETS Number of Doors and Style Exterior Dimensions H x W x D Interior Adjustable Shelves Sump Approv/Lstg Regulation Model No Ship Wt 30 gal 114 L 45 gal 170 L manual manual 44 in x 43 in x 18 in 1118 mm x 109 mm x 457 mm 65 in x 43 in x 18 in 1651 mm x 1092 mm x 457 mm in x 39.5 in x in 1006 mm x 1003 mm x 370 mm 60.5 in x 39.5 in x in 1537 mm x 1003 mm x 370 mm gal 19.7 L FM,N,O,A FM,N,O,A,I FM,N,O,A FM,N,O,A,I lbs 105 kg 238 lbs 108 kg 311 lbs 141 kg 313 lbs 142 kg 60 gal 227 L manual 65 in x 34 in x 34 in 1651 mm x 864 mm x 864 mm 60.5 in x in x in 1537 mm x 781 mm x 771 mm gal 31.5 L FM,N,O,A FM,N,O,A,I lbs 176 kg 392 lbs 178 kg 90 gal* 341* L manual 65 in x 43 in x 34 in 1651 mm x 1092 mm x 864 mm 60.5 in x 39.5 in x in 1537 mm x 1003 mm x 771 mm 10.7 gal 40.6 L FM,N,O,A FM,N,O,A,I lbs 218 kg *U.S. OSHA Code 29CFR states that not more than 60-gal (227-L) may be Class I and Class II liquids. Extra Shelf Accessories Description Dimensions W x D Fits Cabinet Sizes Model No Ship Wt Steel shelf in x 14 in 1000 mm x 356 mm 30 & 45 gal-43 in W 1092 mm lbs 5 kg Steel shelf in x 29 in 771 mm x 737 mm 60 gal-34 in W 864 mm lbs 7 kg Steel shelf in x 29 in 1000 mm x 737 mm 90 gal-43 in W 1092 mm lbs 9 kg

26 SAFETY CABINETS Sentry Slimline Safety Cabinet Gain valuable storage space even when space is tight Use alone or alongside larger cabinets for expanded storage when floor space is limited. The standard slimline cabinet is 18-in (457-mm) deep and only 23¼-in (591-mm) wide. It fits flush alongside a 45-gallon (170-L) cabinet. The slimline safety cabinet has all the same features as the larger safety cabinets such as a three-point, self-latching door with self-latching handle; a 2-in (51-mm) leakproof sump; dual vents; a grounding wire connector; and a large trilingual warning label to identify contents. The cabinet includes three spill-catching galvanized steel shelves that direct spills to back and bottom into a leakproof sump. Number of Doors and Style Exterior Dimensions H x W x D Interior Adjustable Shelves Approv/Lstg Regulation Model No Ship Wt 22 gal 83 L (standard) 1-door, manual 65 in x in x 18 in 1651 mm x 591 mm x 457 mm 60.5 in x 20 in x in 1537 mm x 508 mm x 370 mm 3 FM,N,O,A lbs 90 kg 26

27 Sentry Wall-Mount Safety Cabinet Make the most of usable storage space hang cabinet above workbench for easy access SAFETY CABINETS Gain storage space near work areas without taking up extra floor space. Eye-level positioning allows for easy access to solvents. Five adjustable shelves accommodate multiple containers. Mounting hardware is included. Number of Doors and Style Exterior Dimensions H x W x D Interior Adjustable Shelves Approv/Lstg Regulation Model No Ship Wt 20 gal 76 L manual 44 in x 43 in x 12 in 1118 mm x 1092 mm x 305 mm in x 39.5 in x 8.75 in 1006 mm x 1003 mm x 222 mm 5 FM,N,O,A lbs 93 kg Sentry Undercounter Safety Cabinets Conveniently locate liquids near work areas Take advantage of undercounter space to store flammable liquids safely. Each cabinet is sized and fitted with a 3½-in H x 2 ½-in D (89-mm x 64-mm) kickplate to mount flush with other cabinets. Dual vents with flash arresters on the back wall provide an easy connection if you need ventilation. Self-leveling feet adjust to 1-1/8-in (29-mm) for alignment on uneven floors. Number of Doors and Style Exterior Dimensions H x W x D Interior Adjustable Shelves Approv/Lstg Regulation Model No Ship Wt 22 gal 83 L manual FM,N,O,A in x 35 in x 22 in in x in x in mm x 889 mm x 559 mm 695 mm x 806 mm x 476 mm FM,N,O,A,I lbs 86 kg 205 lbs 93 kg