INDEX 02 : CABLE LADDERS

Transcription

1 02-01 INDEX 02 : CABLE LADDERS Part No. Part No. Part No. Part No. Part No. ACS ORIGINALSTRUT ; CABLE LADDER - STEEL GENERAL INFORMATION LGBE8O LGTE LGER LGLR5O Cable Tray System LGBE8O LGTE LGER LGLR5O General Info LGBE8O LGTE LGER LGLR5O General Info LGBE8O LGTE8O LGER General Info LGBE8O LGTE8O LGER LGLR Accessory Supports CROSS 12B 16A 20B 20C LGTE8O LGER8O LGLR Accessory Supports LGCE LGTE8O LGER8O LGLR NEMA 12B LADDER - STEEL LGCE LGTE8O LGER8O LGLR LGST LGCE IN. RISER 12B 16A 20B 20C LGER8O LGLR LGST LGCE LGIR LGER8O LGLR LGST LGCE LGIR STR. REDUCER 12B 16A 20B 20C LGLR9O LGST LGCE4O LGIR LGSR LGLR9O LGST LGCE4O LGIR LGSR LGLR9O NEMA 16A LADDER - STEEL LGCE4O LGIR LGSR LGLR9O LGST50RI LGCE4O LGIR4O LGSR LGLR9O LGST5200RI LGCE4O LGIR4O LGSR LGLR9O LGST5300RI LGIR4O LGSR LGST5450RI LGCE LGIR4O LGSR4O LGLR LGST5600RI LGCE LGIR4O LGSR4O LGLR LGST50RO LGCE LGSR4O LGLR LGST5200RO LGCE LGIR LGSR4O LGLR LGST5300RO LGCE LGIR LGSR4O LGLR LGST5450RO LGCE5O LGIR LGSR4O LGLR LGST5600RO LGCE5O LGIR LGLR8O NEMA 20B LADDER - STEEL LGCE5O LGIR LGSR LGLR8O LGST90RI LGCE5O LGIR5O LGSR LGLR8O LGST9200RI LGCE5O LGIR5O LGSR LGLR8O LGST9300RI LGIR5O LGSR LGLR8O LGST9450RI LGCE LGIR5O LGSR LGLR8O LGST9600RI LGCE LGIR5O LGSR R REDUCERS 12B 16A 20B 20C LGST90RO LGCE LGSR5O LGRR LGST9200RO LGCE LGIR LGSR5O LGRR LGST9300RO LGCE LGIR LGSR5O LGRR LGST9450RO LGCE9O LGIR LGSR5O LGRR LGST9600RO LGCE9O LGIR LGSR5O LGRR NEMA 20C LADDER - STEEL LGCE9O LGIR LGSR5O LGRR LGST80RI 02 - LGCE9O LGIR9O LGRR4O LGST8200RI 02 - LGCE9O LGIR9O LGSR LGRR4O LGST8300RI 02 - LGIR9O LGSR LGRR4O LGST8450RI 02 - LGCE LGIR9O LGSR LGRR4O LGST8600RI 02 - LGCE LGIR9O LGSR LGRR4O LGST80RO 02 - LGCE LGSR LGRR4O LGST8200RO 02 - LGCE LGIR LGSR LGST8300RO 02 - LGCE LGIR LGSR9O LGRR LGST8450RO 02 - LGCE8O LGIR LGSR9O LGRR LGST8600RO 02 - LGCE8O LGIR LGSR9O LGRR BEND 12B 16A 20B 20C LGCE8O LGIR LGSR9O LGRR LGBE LGCE8O LGIR8O LGSR9O LGRR LGBE LGCE8O LGIR8O LGSR9O LGRR LGBE TEE 12B 16A 20B 20C LGIR8O LGRR5O LGBE LGTE LGIR8O LGSR LGRR5O LGBE LGTE LGIR8O LGSR LGRR5O LGBE4O LGTE EX. RISER 12B 16A 20B 20C LGSR LGRR5O LGBE4O LGTE LGER LGSR LGRR5O LGBE4O LGTE LGER LGSR LGRR5O LGBE4O LGTE4O LGER LGSR LGBE4O LGTE4O LGER LGSR8O LGRR LGTE4O LGER LGSR8O LGRR LGBE LGTE4O LGER4O LGSR8O LGRR LGBE LGTE4O LGER4O LGSR8O LGRR LGBE LGER4O LGSR8O LGRR LGBE LGTE LGER4O LGSR8O LGRR LGBE LGTE LGER4O L REDUCERS 12B 16A 20B 20C LGRR9O LGBE5O LGTE LGLR LGRR9O LGBE5O LGTE LGER LGLR LGRR9O LGBE5O LGTE LGER LGLR LGRR9O LGBE5O LGTE5O LGER LGLR LGRR9O LGBE5O LGTE5O LGER LGLR LGRR9O LGTE5O LGER LGLR LGBE LGTE5O LGER5O LGLR4O LGRR LGBE LGTE5O LGER5O LGLR4O LGRR LGBE LGER5O LGLR4O LGRR LGBE LGTE LGER5O LGLR4O LGRR LGBE LGTE LGER5O LGLR4O LGRR LGBE9O LGTE LGLR4O LGRR LGBE9O LGTE LGER LGRR8O LGBE9O LGTE LGER LGLR LGRR8O LGBE9O LGTE9O LGER LGLR LGRR8O LGBE9O LGTE9O LGER LGLR LGRR8O LGTE9O LGER LGLR LGRR8O LGBE LGTE9O LGER9O LGLR LGRR8O LGBE LGTE9O LGER9O LGLR LGBE LGER9O LGLR5O LGBE LGTE LGER9O LGLR5O LGBE LGTE LGER9O LGLR5O T: +66(38) F: +66(38) info@niedax.co.th ACS ORIGINALSTRUT ; Reserves the right to change product designs or specifications without prior notice

2 02-02 INDEX 02 : CABLE LADDERS Part No. Part No. Part No. Part No. Part No. ACS ORIGINALSTRUT ; CABLE LADDER - STEEL & ALUMINIUM COVER STR.12B 16A 20B 20C OLD DON BRACKET INTERFACE SPACER CLGST CLGERO LGDB12B LGINFSPC LAL8ST CLGST CLGERO LGDB16A DROP-OUT STR.COVER-ALUMINIUM CLGST CLGERO LGDB20B J OOK COVER CLAMP CLALST CLGST CLGERO LGDB20C LGJC CLALST CLGST CLGERO NEMA LADDER ACCESSORIES- LGJC CLALST CLGST0RO STR.REDUCERS COVER S LGJC CLALST CLGST200RO CLGSR S LGJC CLALST CLGST300RO CLGSR P LGJC COVER PKD. STR.-ALUMINIUM CLGST450RO CLGSR RMSM LGJC CLALPK CLGST600RO CLGSR F LGJC CLALPK COVER PKD. STR. CLGSR P LGJC CLALPK CLGPK CLGSRO CB LGJC CLALPK CLGPK CLGSRO N LGJC CLALPK CLGPK CLGSRO S LGJC VENTILATED COVER-ALUMINIUM CLGPK CLGSRO P LGJC CLALVS CLGPK CLGSRO RMSM LGJC CLALVS CLGPK0RO L REDUCERS COVER F LGJC CLALVS CLGPK200RO CLGLR P LGJC CLALVS CLGPK300RO CLGLR BLIND END PLATE LGJC CLALVS CLGPK450RO CLGLR LGEP LGJC CABLE LADDER ACCESSORIES CLGPK600RO CLGLR LGEP LGJC ALUMINIUM VENTILATED COVER CLGLR LGEP LGJC BEND-AL CLGVS CLGLRO LGEP LGJC LALBE CLGVS CLGLRO LGEP COVER CLIPS LALBE CLGVS CLGLRO LGEP LS6CVC12B LALBE CLGVS CLGLRO LGEP LS6CVC16A LALBE CLGVS CLGLRO LGEP LS6CVC20B LALBE CLGVS0RO R REDUCERS COVER LGEP LS6CVC20C LALBE CLGVS200RO CLGRR LGEP Z OLD DON CLAMP LALBE CLGVS300RO CLGRR LGEP LGZC LALBE CLGVS450RO CLGRR LGEP LGZC LALBE CLGVS600RO CLGRR LGEP LGZC LALBE BEND COVER CLGRR LGEP LGZC LALBE CLGBE CLGRRO LGEP LALBE CLGBE CLGRRO LGEP SQ.OLD DON LALBE CLGBE CLGRRO LGEP LGSQ LALBE CLGBE CLGRRO LGEP LALBE CLGBE CLGRRO LGEP COVER STRAPS COVER BEND-AL CLGBEO REDUCERS PLATE LGEP LGCVS CLALBE CLGBEO LGRP STR. SPLICE PLATE LGCVS CLALBE CLGBEO LGRP LGSSP LGCVS CLALBE CLGBEO LGRP LGSSP LGCVS CLALBE CLGBEO LGRP LGSSP LGCVS CLALBE CROSS COVER LGRP LGSSP CROSS-AL CLGCE LADDER SEPARATOR LGCVS LALCE CLGCE LGRP LGSEP LGCVS LALCE CLGCE LGRP LGSEP LGCVS LALCE CLGCE LGRP LGSEP LGCVS LALCE CLGCE LGRP LGSEP LGCVS LALCE CLGCEO LGRP LADDER SEPARATOR LALCE CLGCEO IT CLAMP LGCVS LALCE CLGCEO LGRP LGSEPCP LGCVS LALCE CLGCEO LGRP INSTRUMENT OODS LGCVS LALCE CLGCEO LGRP INSTRUMENT - LGCVS LALCE TEE COVER LGRP STANCIONS LGCVS LALCE CLGTE LGRP LADDER ACCESSORIES LALCE CLGTE CONNECTOR LGCVS LALCE CLGTE LGRP OR SPLICE PLATE LGCVS LALCE CLGTE LGRP LGSP LGCVS LALCE CLGTE LGRP LGSP LGCVS COVER CROSS-AL CLGTEO LGRP LGSP LGCVS CLALCE CLGTEO LGRP LGSP CLALCE CLGTEO SPLICE PLATE SPLICE PLATE 90 o CABLE LADDER ALUMINIUM CLALCE CLGTEO LGSSP12B LG90S GENERAL INFO CLALCE CLGTEO LGSSP16A LG90S CABLE LADDER ALUMINIUM CLALCE INTERNAL RISER COVER LGSSP20B LG90S CLGIR LGSSP20C LG90S LAL5ST TEE-AL CLGIR INGED VERTICAL SPLICE VER SPLICE PLATE LAL5ST LALTE CLGIR LGVSP12B LGVSP LAL5ST LALTE CLGIR LGVSP16A LGVSP LAL5ST LALTE CLGIR LGVSP20B LGVSP LAL5ST LALTE CLGIRO LGVSP20C LGVSP LALTE CLGIRO INGED ORIZONTAL SPLICE EXP SPLICE PLATE LAL7ST LALTE CLGIRO LGSP12B LGESP LAL7ST LALTE CLGIRO LGSP16A LGESP LAL7ST LALTE CLGIRO LGSP20B LGESP LAL7ST LALTE EXTERNAL RISER COVER LGSP20C LGESP LAL7ST LALTE CLGER DIVIDER STRIP DIVIDER STRIP 150 LALTE CLGER LGDVS12B LGDVS LAL8ST LALTE CLGER LGDVS16A LGDVS LAL8ST LALTE CLGER LGDVS20B LGDVS LAL8ST LALTE CLGER LGDVS20C LGDVS LAL8ST LALTE T: +66(38) F: +66(38) info@niedax.co.th ACS ORIGINALSTRUT ; Reserves the right to change product designs or specifications without prior notice

3 02-03 INDEX 02 : CABLE LADDERS Part No. Part No. Part No. Part No. Part No. ACS ORIGINALSTRUT ; CABLE LADDER - STEEL & ALUMINIUM COVER TEE-AL CLALTE CLALRR LALRP USL USLR CLALTE LALRP USL USLR CLALTE L REDUCER - AL LALRP USL USLR CLALTE LALLR LALRP USL USLR CLALTE LALLR LALRP USL USLR IN. RISER-AL LALLR LALRP USL USLR LALIR LALLR USL USLR LALIR LALLR LALRP USL USLR LALIR LALLR LALRP USL USLR LALIR LALLR LALRP USL USLR LALIR LALLR LALRP VERTICAL TEE (USLE) TEE (USLT) LALIR LALLR LALRP USLE USLT LALIR LALLR USLE USLT LALIR LALLR COVER CLAMP USLE USLT LALIR LALLR USLE USLT LALIR COVER REDUCER L. - AL LALCVC USLE USLT LALIR CLALLR USLE USLT LALIR CLALLR LALCVC USLE USLT LALIR CLALLR USLE USLT LALIR CLALLR LALCVC USLE USLT LALIR Z OLD DON CAMP USLE USLT COVER IN. RISER-AL ACCESSORIES AND 0 USLE USLT CLALIR FASTENERS - ALUMUNIUM LALZC USLE USLT CLALIR USLE USLT CLALIR BLIND END PLATE - AL LALZC USLE USLT CLALIR LALEP USLE USLT CLALIR LALEP LALZC USLE USLT EX. RISER-AL LALEP USLE USLT LALER LALEP DIVIDER STRIP USLE USLT LALER LALEP LALDVS USLE USLT LALER LALEP LALDVS USLE USLT LALER LALEP LALDVS USLE USLT LALER LALEP COVER CLIPS USLE USLT LALER LALEP LS6CVC12A USLE USLT LALER LALEP LS6CVC16A USLE USLT LALER LALEP LS6CVC20A USLE USLT LALER LALEP USLE USLT LALER LALEP SQ.OLD DON-AL USLE USLT LALER LALEP LALSQ O BEND (USLB) LALER LALEP USLB Straight Coupler LALER RIGID OLD DON BRACKET-AL USLB USLSC LALER LADDER-ALUMUNIUM LALRG USLB USLSC LALER ACCESSORIES USLB USLSC Vertical inged ST. SPLICE PLATE COVER EX. RISER-AL INTERFACE SPACER-AL USLB coupler CLALER LALINFSPC USLB USLVC CLALER USLB USLVC CLALER LALSSP COVER STRAPS USLB USLVC CLALER LS6CVS USLB OLD DON CLAMP CLALER LALSSP LS6CVS USLB USLDC STR. REDUCER - AL LADDER SEPARATOR LS6CVS USLB USLDC LALSR LS6CVS USLB USLDC LALSR LALSEP LS6CVS USLB DIVIDER STRIP LALSR USLB USLDIV LALSR LALSEP LS6CVS USLB USLDIV LALSR LS6CVS USLB USLDIV LALSR LALSEP LS6CVS USLB ROUND EAD BOLT LALSR SPLICE PLATE 90 O LS6CVS USLB NBPM LALSR LS6CVS USLB NBPM LALSR LAL90S USLB NBPM LALSR LS6CVS USLB NBPM LALSR LAL90S LS6CVS USLB NM LALSR LS6CVS USLB FM COVER STR.REDUCER -AL LAL90S LS6CVS USLB SM CLALSR ORI. SPLICE PLATE LS6CVS USLB CLALSR USLB FRP CABLE LADDER & CLALSR LALSP MARINE LADDER - STEEL USLB ACCESSORIES CLALSR MARINE LADDER (USL) 90 O RISER (USLR) CABLE LADDER STR R REDUCER - AL LALSP USL USLR CABLE LADDER STR. LALRR USL USLR IT COVER LALRR LALSP USL USLR ORI. BEND LALRR USL USLR ORI. TEE LALRR VER.SPLICE PLATE USL USLR IN.VER. BEND LALRR USL USLR OUT.VER. BEND LALRR LALVSP USL USLR ORI. CROSS LALRR USL USLR STR. REDUCER LALRR LALVSP USL USLR L/R REDUCER LALRR USL USLR SPLICE PLATE LALRR LALVSP USL USLR LALRR USL USLR LALRR REDUCER PLATE USL USLR COVER R REDUCER - AL LALRP USL USLR CLALRR LALRP USL USLR CLALRR LALRP USL USLR CLALRR LALRP USL USLR T: +66(38) F: +66(38) info@niedax.co.th ACS ORIGINALSTRUT ; Reserves the right to change product designs or specifications without prior notice

4 02-01 ACS ORIGINALSTRUT ; CABLE LADDER, CABLE TRAY, DUCT & TRUNKING SYSTEMS Straight Length (Cable Ladder) o orizontal Elbow 21 Adj. Vertical Connector 2 Straight Length (Cable Ladder) o Internal Vertical Elbow 22 Adj. orizontal Connector 3 Straight Length (Cable Tray) o External Vertical Elbow 23 Reducer Plate 4 Straight Length (Duct & Trunking) 14 orizontal Tee 24 Offset Reducer 5 Flat Covers 15 Cable Duct Tee Connector o Splice Plate 6 Internal 90 o Vertical Elbow 16 orizontal Tee 26 Straight Divider 7 External 90 o Vertical Elbow 17 orizontal Cross 27 Cover Connector Clip 8 Cable Duct 90 o Internal Elbow 18 Straight Reducers 28 Cover Connector Strap 9 Cable Duct 90 o External Elbow 19 Splice Plate 29 Dropout 45 o orizontal Elbow 20 Expansion Connector 30 Blind End.

5 02-02 ACS ORIGINALSTRUT ;CABLE LADDER GENERAL INFORMATION ACS ORIGINALSTRUT ; manufacture and market the largest range of cable ladder systems for the global Electrical Industry, this extensive range of cable ladder support systems includes a comprehensive range of steel, aluminium and FRP cable ladders load rated to NEMA Standard VE1-2009, steel cable ladders can be manufactured to side-rail in or side-rail out configuration depending on project requirements In cases where extremely high corrosion resistance is required, stainless steel and FRP cable ladder systems are available, all our cable ladder systems are complemented with a complete range of accessories: orizontal Bends, Internal and External Risers, Tees, Crosses, Reducers, inged orizontal and Vertical Splices, Adjustable Risers, Covers, Divider Strip, Dropouts, Adjustable Cantilever Support, Brackets and Cable Clamps ACS ORIGINALSTRUT ; Cable Ladder - STEEL eight Cable laying depth Length idths 75, 0, 130, 150 MM 54, 79, 9, 129 MM 3 M or 6 M 0,200,300,450,600,900 MM ACS ORIGINALSTRUT ; Cable Ladder - ALUMINIUM eight Cable laying depth Length idths 0, 125, 150 MM 77,0,129 MM 3 M or 6 M 0,200,300,450,600,900 MM PRODUCT CABLE LADDER These ladders carry large cables with high voltage power carrying capacity, used on all major industrial sites. Ladders come in various strengths depending on loading capacity and in either 3 or 6m lengths, materials used, Steel ot Dipped Galvanised, Aluminium, Stainless steel SS304 / SS316, Epoxy painted steel

6 02-03 ACS ORIGINALSTRUT ; CABLE LADDER NEMA RATED GENERAL INFORMATION The following notes are presented in order to assist users to achieve maximum economy and convenience with the installation of cable support systems, as each application will have its own particular conditions and requirements it is recommended that the services of ACS ORIGINALSTRUT ; sales personnel and engineering team be engaged, especially in the early stages of any major project, so that the best overall result can be achieved Standard Sizes Standard ladder widths are 0mm,200mm, 300mm,450mm, 600mm and 900mm, being the inside dimension between side-rails and is the maximum width available for carrying cables. Straight lengths are 3m or 6m long. Standard rung spacing on all systems is 300mm nominal Each system includes a full range of standard accessories, with a nominal radius of 300mm, 450mm and 600mm, depending on the system load class. Non-standard ladder widths and accessory radii can be manufactured against order Load Capacity a) Cable Load - Because cable density remains fairly constant in a total installation, the widest ladders carry the most load, and each smaller width carries proportionately less load however, the load carrying capacity of any class of ladder is independent of the width For details on how safe working loads are determined, refer to the NEMA VE Standard and to published load graphs for allowable loads of each ladder type b) Fixed Ladder Spans - It is commonly found that the building structure supporting cable ladders will dictate the span, but it is still possible to exercise some choice. here the cabling is heaviest, and this is not usually extensive, it is possible to use (say) two 300mm wide ladders side by side instead of one 600mm wide, in order to select a lighter category of ladder for the total project, it is often inconvenient to use more than one ladder category in the same installation c) Varying the Spans - here the structure does not dictate the ladder span, the heaviest cable runs could be supported more frequently, again enabling a lighter category of ladder to be chosen Cable Laying Depth Each of the cable and tray systems has a different cable laying depth, it is a general rule that the shallower the ladder, the lower cost per metre and the more frequently it needs supports. It is sometimes found that the lightest, most economical ladders are excluded from consideration solely because a particular minimum cable laying depth is required and has been specified accordingly Deflection Cable ladders are essentially structural members designed to strength requirements only and are required to support pliable load elements therefore, the control of deflection is not necessary for durability or stability reasons and can probably only be justified on purely aesthetic grounds. If normally accepted deflection limits such as 1/360th of span are imposed, the resultant cable ladder will be grossly overdesigned and correspondingly expensive There may still be locations where the designer wishes to limit visual deflection for example, prestige areas which may be open to public view or where the ladder is installed at eye level and deflection is accentuated, if these conditions exist, it is recommended that closer support spacings be used only in those important locations (to control visual deflection) and normal support spacings elsewhere (for economy). A maximum of 1/180th of span, when deflection is determined from the graphs published in this catalogue, should prove a satisfactory limit for visual deflection Otherwise, wherever overall economy is the principal consideration, no limits should be placed on deflection, this does not mean that deflection will be excessive but simply that a typically acceptable installation will result and optimum economy will be attained

7 02-04 ACS ORIGINALSTRUT ; CABLE LADDER NEMA RATED GENERAL INFORMATION Material Selection Often the most difficult decision to be made is the selection of material, because it involves the most costsensitive of compromises, material choice is directly related to service life and the longer the required life the more expensive will be the materials, the cost of these materials also must be considered as an equation of initial investment versus maintenance costs and eventual replacement Because service conditions for cable ladders can vary over an enormously wide range, even within a single installation, it is impossible to write down any hard and fast rules on the subject of corrosion and expected lifespan, the following may be considered a guide as to what can be expected from the various materials and finishes currently available for cable support systems a) Galvanised Steel ot-dipped galvanised steel (after fabrication) is a common selection, as it is economical to purchase and suitable for most conditions of outdoor exposure, for indoor applications, or anywhere that is essentially free from moisture, galvanised ladders can be considered to have an indefinite life. That is, they should last as long as the plant, building, cabling or equipment which they service On a typical industrial or processing plant installation, exposed to weather, moisture and airborne industrial pollution, a basic life of approximately twenty to twenty five years can be expected. This is not to say that the ladder will be completely corroded in that time but it is the probable life of the corrosion protecton finish, beyond that time rapid decay can be expected and maintenance costs will increase substantially in order to keep the ladders serviceable The twenty to twenty five years life quoted here should be adjusted up or down depending on the circumstances, for example if installed near the coast, the effect of salt laden air may shorten the expected life, also galvanising is sensitive to some chemicals, especially sulphurous compounds, which may be intrinsic to plant operations where the ladder is installed. Correspondingly, a longer life will be expected in lighter industrial situations and if drier conditions exist b) Aluminium Aluminium is also a popular choice of material for cable ladders, most frequently it is selected because of its excellent performance in marine environments such as is found on wharves, coal loaders or similar Port Facilities where salt spray or salt laden atmosphere is present. Another reason for using aluminium is that it offers a long maintenance free life which is important in cases where access for future painting or repairs may be costly and difficult For any given load class or capacity, aluminium cable ladders are more expensive than their galvanised steel counterparts, aluminium ladders can also be expected to have a greater deflection than an equivalent steel system. On the other hand, they are lighter, more readily handled and are easy to work with, resulting in faster installation and therefore lower installation cost Aluminium cable ladders can be expected to have a lifespan well in excess of twenty five years in most industrial or marine applications, the exception would be in the case of a local concentration of chemicals which are detrimental to aluminium, alkaline compounds or fumes is a common example but if any doubt exists, the advice of aluminium suppliers should be sought c) Stainless Steel Stainless Steel is sometimes considered as a material for cable ladders, usually where extremely high corrosion resistance, coupled with difficulty of servicing after installation and a high degree of reliability are essential requirements, offshore oil & gas platforms may be one example where these conditions exist

8 02-05 ACS ORIGINALSTRUT ; NEMA CABLE LADDER - ACCESSORY SUPPORTS Accessories for all Unistrut cable ladder systems are available in six standard widths-0, 200, 300, 450, 600 or 900mm, System Std. Radius 12B SCL and 12A ACL 300mm 16A SCL and 20A ACL 450mm 20B, 20C SCL and 20C ACL 600mm Fixed bends and Internal or External Risers are readily avilable with a 90 o angle, other angles (30 o,45 o or 60 o ) and other radii (300,450,600 or 900mm) can be supplied on special request, the radii also applies to Tees and Crosses All support locations below are in accordance with NEMA standard VE TEES & CROSSES For smaller radius accessories and / or lighter loaded ladders, the support methods shown may be reduced or even eliminated This is best determined at the point of installation or consult your local Unistrut Service Centre RISER & BENDS For narrower ladders and smaller angles, the bend centre support may be deleted STRAIGT OR OFFSET REDUCER Staight Reducer plus left and right hand offset reducers are available for all Unistrut Cable Ladder systems Major idth:a 200,300,450,450,600,900 Minor idth:b 0,200,300,450 Reducer splice plates are available for all ladder systems

9 02-06 ACS ORIGINALSTRUT ; NEMA CABLE LADDER - ACCESSORY SUPPORTS CABLE LADDER ACCESSORY SUPPORTS - FASTENERS Fasteners required for fixing of steel and aluminium cable ladder systems: Fastener Quantities - Steel Cable Ladders Splice Plates Description Part No. Quantity Straight, Reducer,/,/V 12B Splice Screw (EZP) S16 2 per Splice Plate 16A, 16A-RI, 20B, 20B-RI Splice Screw (DG) CB20 4 per Splice Plate Splice Nut (DG) N 20C, 20C-RI Splice Screw (DG) CB20 8 per Splice Plate Splice Nut (DG) N Accessories 12B Splice Screw (EZP) S16 4 per Bend, Riser or Reducer 6 per Tee, 8 per Cross 16A, 16A-RI, 20B, 20B-RI Splice Screw (DG) CB20 8 per Bend, Riser or Reducer Splice Nut (DG) N 12 per Tee, 24 per Cross 20C, 20C-RI Splice Screw (DG) CB20 16 per Bend, Riser or Reducer Splice Nut (DG) N 24 per Tee, 32 per Cross Fastener Quantities - Aluminium Cable Ladders Splice Plates Description Part No. Quantity 16A, 20B Splice Screw (SS316) S16 4 per Splice Plate 20C Splice Screw (SS316) CB20 4 per Splice Plate Splice Nut (Nyloc SS316) N Accessories 20A Splice Screw (SS316) S16 8 per Bend, Riser or Reducer 12 per Tee, 16 per Cross 20C Splice Screw (SS316) CB20 8 per Bend, Riser or Reducer Splice Nut (Nyloc SS316) N 12 per Tee, 16 per Cross

10 02-07 ACS ORIGINALSTRUT ; NEMA 12B CABLE LADDER - STEEL Technical Data Cable Laying Depth 54mm Loading Data Basic Load Capacity 131kg/lin.m on 3.6m span 424 kg/lin.m on 2.0m span Length 3m & 6m Rung Spacing 300mm nominal Finish ot Dipped Galvanised, Stainless Steel 304 / 316 or painted Parts List 6000 Dim Part No / 300 "" SAP Des. 0 LGST40RI 200 LGST4200RI 300 LGST4300RI LGST4450RI LGST4600RI 1 0 LGST40RO 200 LGST4200RO LGST4300RO LGST4450RO LGST4600RO Note : Fire Rated to AS/NZS3013:1995 Appendix B - Classification S5X. Refer to your local Service Centre for load ratings and correct installation procedures. Allowable Load Graph * Splice plate & Fixing screws are not included (order separately) Deflection Graph Allowable loads are determined generally in accordance with NEMA Standard VE1 and verified by testing Safety Factor = 1.5 on collapse load for single span Deflections shown apply to the end-bays (ie.worst case) of a continuous ladder run, to find deflection of a single span multiply by 2.5

11 02-08 ACS ORIGINALSTRUT ; NEMA 16B CABLE LADDER - STEEL Technical Data Cable Laying Depth 79mm Loading Data Basic Load Capacity 79 kg/lin.m on 6m span 470 kg/lin.m on 3m span Length 3m & 6m Rung Spacing 300mm nominal Finish ot Dipped Galvanised, Stainless Steel 304 / 316 or Painted Parts List Dim Type Part No / "" SAP Des. 0 Rail In LGST50RI 200 Rail In LGST5200RI 300 Rail In LGST5300RI 450 Rail In LGST5450RI 600 Rail In LGST5600RI "RI"-Rail In Series 0 Rail Out LGST50RO 200 Rail Out LGST5200RO 300 Rail Out LGST5300RO 450 Rail Out LGST5450RO 600 Rail Out LGST5600RO "RO"-Rail Out Series Note : Fire rated to AS/NZS3013:1995 Appendix B - Classification S5X. Refer to your local Service Centre for load ratings and correct installation procedures. * Splice plate & Fixing screws are not included (order separately) 0 79 Allowable Load Graph Deflection Graph Allowable loads are determined generally in accordance with NEMA Standard VE1 and verified by testing. Safety Factor = 1.5 on collapse load for single span Deflections shown apply to the end-bays (ie.worst case) of a continuous ladder run. To find deflection of a single span, multiply by 2.5

12 02-09 ACS ORIGINALSTRUT ; NEMA 20B CABLE LADDER - STEEL Technical Data Cable Laying Depth 9 mm Loading Data Basic Load Capacity kg/lin.m on 6m span 573 kg/lin.m on 3m span Length 3m & 6m Rung Spacing 300mm nominal Finish ot Dipped Galvanised, "RI"-Rail In Series Stainless Steel 304 / 316 or Painted Parts List Dim Type Part No / "" SAP Des. 0 Rail In LGST90RI 200 Rail In LGST9200RI 300 Rail In LGST9300RI 450 Rail In LGST9450RI 600 Rail In LGST9600RI Rail Out LGST90RO 200 Rail Out LGST9200RO 300 Rail Out LGST9300RO 450 Rail Out LGST9450RO 600 Rail Out LGST9600RO Note : Fire rated to AS/NZS3013:1995 "RO"-Rail Out Series Appendix B - Classification S5X. Refer to your local Service Centre for load ratings and correct installation procedures * Splice plate & Fixing screws are not included (order separately) 32 Allowable Load Graph Deflection Graph Allowable loads are determined generally in accordance with NEMA Standard VE1 and verified by testing. Safety Factor = 1.5 on collapse load for single span Deflections shown apply to the end-bays (ie.worst case) of a continuous ladder run. To find deflection of a single span, multiply by 2.5

13 02 - ACS ORIGINALSTRUT ; NEMA 20C CABLE LADDER - STEEL Technical Data Cable Laying Depth 129 mm Loading Data Basic Load Capacity 168 kg/lin.m on 6m span 653 kg/lin.m on 3m span Length 3m & 6m Rung Spacing 300mm nominal Finish ot Dipped Galvanised, Stainless Steel 304 / 316 or Painted Parts List Dim Type Part No / "" SAP Des. 0 Rail In LGST80RI 200 Rail In LGST8200RI 300 Rail In LGST8300RI 450 Rail In LGST8450RI 600 Rail In LGST8600RI Rail Out LGST80RO 200 Rail Out LGST8200RO 300 Rail Out LGST8300RO 450 Rail Out LGST8450RO 600 Rail Out LGST8600RO Note : Fire rated to AS/NZS3013:1995 Appendix B - Classification S5X. Refer to your local Service Centre for load ratings and correct installation procedures. * Splice plate & Fixing screws are not included (ordered separately) Allowable Load Graph Deflection Graph Allowable loads are determined generally in accordance with NEMA Standard VE1 and verified by testing. Safety Factor = 1.5 on collapse load for single span Deflections shown apply to the end-bays (ie.worst case) of a continuous ladder run. To find deflection of a single span, multiply by 2.5

14 02-11 ACS ORIGINALSTRUT ; NEMA CABLE LADDER ACCESSORIES- STEEL Steel Shaped Accessories - BENDS, CROSSES with Cover FLAT BEND 90 o ith Flange FLAT BEND 90 o ithout Flange Radius idth eight R FLAT BEND 90 O LGBE40 LGBE4O ith Flange LGBE4200 LGBE4O LGBE4300 LGBE4O LGBE4450 LGBE4O LGBE4600 LGBE4O LGBE50 LGBE5O LGBE5200 LGBE5O LGBE5300 LGBE5O LGBE5450 LGBE5O O R 150 LGBE5600 LGBE5O LGBE90 LGBE9O LGBE9200 LGBE9O LGBE9300 LGBE9O ithout Flange LGBE9450 LGBE9O LGBE9600 LGBE9O LGBE80 LGBE8O LGBE8200 LGBE8O LGBE8300 LGBE8O LGBE8450 LGBE8O LGBE8600 LGBE8O O R 150 Radius idth eight FLAT COSS 90 o ith Flange FLAT COSS 90 o ithout Flange R LGCE40 LGCE4O LGCE4200 LGCE4O LGCE4300 LGCE4O LGCE4450 LGCE4O LGCE4600 LGCE4O FLAT CROSS 90 O ith Flange LGCE50 LGCE5O LGCE5200 LGCE5O LGCE5300 LGCE5O LGCE5450 LGCE5O LGCE5600 LGCE5O LGCE90 LGCE9O LGCE9200 LGCE9O LGCE9300 LGCE9O LGCE9450 LGCE9O LGCE9600 LGCE9O LGCE80 LGCE8O LGCE8200 LGCE8O LGCE8300 LGCE8O LGCE8450 LGCE8O LGCE8600 LGCE8O ithout Flange O R idths over 600mm Degree is 30,45,60 also available on request - Fixing ardware for cable ladder systems must be ordered O R 150 separately Finish ot Dip Galanvised, Stainless Steel 304 / 316 or Painted

15 02-12 ACS ORIGINALSTRUT ; NEMA CABLE LADDER ACCESSORIES- STEEL Steel Shaped Accessories - TEES, RISER with COVER TEE 90 o ith Flange Radius idth eight TEE 90 o ithout Flange R LGTE40 LGTE4O LGTE4200 LGTE4O LGTE4300 LGTE4O LGTE4450 LGTE4O LGTE4600 LGTE4O ORIZONTAL TEE 90 o ith Flange LGTE50 LGTE5O LGTE5200 LGTE5O LGTE5300 LGTE5O LGTE5450 LGTE5O O R 150 LGTE5600 LGTE5O LGTE90 LGTE9O ithout Flange LGTE9200 LGTE9O LGTE9300 LGTE9O LGTE9450 LGTE9O LGTE9600 LGTE9O LGTE80 LGTE8O LGTE8200 LGTE8O LGTE8300 LGTE8O LGTE8450 LGTE8O LGTE8600 LGTE8O R O 150 INT. RISER 90 o ith Flange INT. RISER 90 o ithout Flange Radius idth eight R INTERNAL RISER - 90 O LGIR40 LGIR4O LGIR4200 LGIR4O ith Flange R 150 LGIR4300 LGIR4O LGIR4450 LGIR4O O LGIR4600 LGIR4O LGIR50 LGIR5O LGIR5200 LGIR5O LGIR5300 LGIR5O LGIR5450 LGIR5O LGIR5600 LGIR5O LGIR90 LGIR9O LGIR9200 LGIR9O ithout Flange LGIR9300 LGIR9O LGIR9450 LGIR9O LGIR9600 LGIR9O LGIR80 LGIR8O LGIR8200 LGIR8O O R LGIR8300 LGIR8O LGIR8450 LGIR8O LGIR8600 LGIR8O idths over 600mm Degree is 30,45,60 also available on request - Fixing ardware for cable ladder systems must be ordered separately - Finish ot Dip Galanvised, Stainless Steel 304 / 316 or Painted

16 02-13 ACS ORIGINALSTRUT ; CABLE LADDER ACCESSORIES- STEEL Steel Shaped Accessories - RISERS & COVER EXT. RISER 90 o ith Flange EXT. RISER 90 o ithout Flange Radius idth eight R EXTERNAL RISER - 90 O LGER40 LGER4O LGER4200 LGER4O LGER4300 LGER4O LGER4450 LGER4O ithout Flange ith Flange LGER4600 LGER4O LGER50 LGER5O LGER5200 LGER5O LGER5300 LGER5O LGER5450 LGER5O LGER5600 LGER5O LGER90 LGER9O LGER9200 LGER9O O R O R 150 LGER9300 LGER9O LGER9450 LGER9O LGER9600 LGER9O LGER80 LGER8O LGER8200 LGER8O LGER8300 LGER8O LGER8450 LGER8O LGER8600 LGER8O STR. REDUCER ith Flange idth idth eight STR. REDUCER ithout Flange a b STRAIGT REDUCER LGSR LGSR4O ith Flange LGSR LGSR4O LGSR LGSR4O LGSR LGSR4O b LGSR LGSR4O LGSR LGSR4O LGSR LGSR5O LGSR LGSR5O LGSR LGSR5O LGSR LGSR5O LGSR LGSR5O a LGSR LGSR5O ithout Flange LGSR LGSR9O LGSR LGSR9O LGSR LGSR9O b LGSR LGSR9O LGSR LGSR9O LGSR LGSR9O LGSR LGSR8O LGSR LGSR8O LGSR LGSR8O LGSR LGSR8O LGSR LGSR8O a LGSR LGSR8O idths over 600mm Degree is 30,45,60 also available on request - Fixing ardware for cable ladder systems must be ordered separately - Finish ot Dip Galanvised, Stainless Steel 304 / 316 or Painted

17 02-14 ACS ORIGINALSTRUT ; CABLE LADDER ACCESSORIES - STEEL Steel Shaped Accessories - REDUCERS & COVER L-REDUCER ith Flange L-REDUCER ithout Flange idth idth eight a b LGLR LGLR4O LGLR LGLR4O LGLR LGLR4O LGLR LGLR4O LGLR LGLR4O LGLR LGLR4O L - REDUCER ith Flange b LGLR LGLR5O LGLR LGLR5O LGLR LGLR5O LGLR LGLR5O LGLR LGLR5O LGLR LGLR5O ithout Flange a LGLR LGLR9O LGLR LGLR9O LGLR LGLR9O LGLR LGLR9O LGLR LGLR9O LGLR LGLR9O b LGLR LGLR8O LGLR LGLR8O LGLR LGLR8O LGLR LGLR8O LGLR LGLR8O LGLR LGLR8O R-REDUCER ith Flange R-REDUCER ithout Flange idth idth eight a b R - REDUCER ith Flange a LGRR LGRR4O LGRR LGRR4O b LGRR LGRR4O LGRR LGRR4O LGRR LGRR4O LGRR LGRR4O LGRR LGRR5O LGRR LGRR5O LGRR LGRR5O a LGRR LGRR5O LGRR LGRR5O ithout Flange LGRR LGRR5O LGRR LGRR9O b LGRR LGRR9O LGRR LGRR9O LGRR LGRR9O LGRR LGRR9O LGRR LGRR9O LGRR LGRR8O LGRR LGRR8O LGRR LGRR8O a LGRR LGRR8O LGRR LGRR8O LGRR LGRR8O idths over 600mm Degree is 30,45,60 also available on request - Fixing ardware for cable ladder systems must be ordered separately - Finish ot Dip Galanvised, Stainless Steel 304 / 316 or Painted

18 02-15 ACS ORIGINALSTRUT ; NEMA CABLE LADDER COVER - STEEL Ladder Cover - STRAIGT LENGTS STR.COVER Rail In STR.COVER Rail Out idth eight COVER STRAIGT CLGST0 CLGST0RO 0 CLGST200 CLGST200RO 200 CLGST300 CLGST300RO 300 CLGST450 CLGST450RO 450 CLGST600 CLGST600RO 600 Type 1 L = 3000mm Note Type 1. > Use for Cover idth 0 to 200 Type 2. > Use for Cover idth 300 to 00 - idths over 600mm available for side Rail In only - Fixing ardware for cable ladder systems must be ordered separately Finish ot Dip Galvanised, Stainless Steel 304 / 316 or Painted Type 2 L = 3000mm Rail In + 5 Rail Out + 45 COVER PEAKED STRAIGT COVER PEAKED Rail In COVER PEAKED Rail Out idth eight COVER PEAKED STRAIGT CLGPK0 CLGPK0RO 0 CLGPK200 CLGPK200RO 200 CLGPK300 CLGPK300RO 300 CLGPK450 CLGPK450RO 450 L = 3000 mm CLGPK600 CLGPK600RO 600 COVER VENTILATED STRAIGT COVER VENTILATED COVER VENTILATED Rail In Rail Out idth eight Rail In Rail Out 15 O O CLGVS0 CLGVS0RO 0 CLGVS200 CLGVS200RO 200 CLGVS300 CLGVS300RO 300 CLGVS450 CLGVS450RO 450 COVER VENTILATED STRAIGT + 45 CLGVS600 CLGVS600RO 600 L = 3000 mm - idths over 600mm available on request - Fixing ardware for cable ladder systems must be ordered separately Finish ot Dip Galvanised, Stainless Steel 304 / 316 or Painted +5 Rail In Rail Out

19 02-16 ACS ORIGINALSTRUT ; NEMA CABLE LADDER COVER - STEEL Ladder Covers Accessories COVER ith Flang COVER ithout Flang BEND COVER idth eight CLGBE0 CLGBEO0 0 CLGBE200 CLGBEO CLGBE300 CLGBEO CLGBE450 CLGBEO CLGBE600 CLGBEO CROSS COVER CLGCE0 CLGCEO0 0 CLGCE200 CLGCEO CLGCE300 CLGCEO CLGCE450 CLGCEO CLGCE600 CLGCEO TEE COVER CLGTE0 CLGTEO0 0 CLGTE200 CLGTEO CLGTE300 CLGTEO CLGTE450 CLGTEO CLGTE600 CLGTEO INTERNAL RISER COVER CLGIR0 CLGIRO0 0 CLGIR200 CLGIRO CLGIR300 CLGIRO CLGIR450 CLGIRO CLGIR600 CLGIRO EXTERNAL RISER COVER CLGER0 CLGERO0 0 CLGER200 CLGERO CLGER300 CLGERO CLGER450 CLGERO CLGER600 CLGERO STRAIGT REDUCER COVER CLGSR0 CLGSRO0 0 CLGSR200 CLGSRO CLGSR300 CLGSRO CLGSR450 CLGSRO CLGSR600 CLGSRO L REDUCER COVER CLGRL0 CLGRLO0 0 CLGRL200 CLGRLO CLGRL300 CLGRLO CLGRL450 CLGRLO CLGRL600 CLGRLO R REDUCER COVER CLGRR0 CLGRRO0 0 CLGRR200 CLGRRO CLGRR300 CLGRRO CLGRR450 CLGRRO CLGRR600 CLGRRO (+5) (+5) FLAT CROSS 90 O COVER ORIZONTAL TEE 90 o COVER FLAT BEND 90 O COVER (+5) (+5) (+5) INTERNAL RISER 90 O COVER (+5) (+5) (+5) STRAIGT REDUCER COVER (+5) (+5) EXTERNAL RISER 90 O COVER (+5) L REDUCER COVER (+5) (+5) R REDUCER COVER - idths over 600mm available on request - Fixing ardware for cable ladder systems must be ordered separately Finish ot Dip Galvanised, Stainless Steel 304 / 316 or Painted (+5) L = 3000mm

20 02-17 ACS ORIGINALSTRUT ; NEMA CABLE LADDER ACCESSORIES - STEEL Steel Shaped Accessories - Reducers REDUCER SPLICE OLD DON BRACKET 16A / 20B / 20C 12B SPLICE PLATES DIVIDER STRIP 12B 16A / 20B 20C INGED ORIZONTAL SPLICE INGED VERTICAL SPLICE Type idth (mm) eight'" Part No. / SPLICE PLATE INGED ORIZONTAL SPLICE REDUCER SPLICE SAP Des. Type Type 12B 0 60 LGRP40 12B LGSSP12B 12B 12B LGRP A LGSSP16A 16A 12B LGRP B LGSSP20B 20B 12B LGRP C LGSSP20C 20C 12B LGRP A 0 84 LGRP50 INGED VERTICAL SPLICE OLD DON BRACKET 16A LGRP5200 Type Type 16A LGRP B LGVSP12B 12B 16A LGRP A LGVSP16A 16A 16A LGRP B LGVSP20B 20B 20B LGRP90 20C LGVSP20C 20C 20B LGRP B LGRP9300 DIVIDER SRTIP 20B LGRP9450 Type 20B LGRP B LGDVS12B 20C LGRP80 16A LGDVS16A 20C LGRP B LGDVS20B 20C LGRP C LGDVS20C 20C LGRP C LGRP8600 Fixing ardware for cable ladder systems must be ordered separately * Finish ot Dip Galvanised, Stainless Steel 304 / 316 or Painted LGSP12B LGSP16A LGSP20B LGSP20C LGDB12B LGDB16A LGDB20B LGDB20C

21 02-18 ACS ORIGINALSTRUT ; NEMA CABLE LADDER ACCESSORIES - STEEL Steel Shaped Accessories - Fasteners SPLICE PLATES Screws and nuts must be ordered separately 12B 16A & 20B 20C OLD DON BRACKET DIVIDER STRIP 12B 3m 16A, 20B & 20C 12B Positioned at any point along ladder length. Brackets provide rigid clamping for all steel systems Used to separate cables of different voltages or circuits. The notched base permits forming to the required shape. Fix at 1m centres Fasteners Type Description 12B Splice Screw S16 12B old Down Bracket Screw S B old Down Bracket Nut P07 12B Divider Strip Screw RMSM B Divider Strip asher F08 12B Divider Strip Nut P06 16A, 20B, 20C Splice Screw CB20 16A, 20B, 20C Splice Nut N 16A, 20B, 20C old Down Bracket Screw S A, 20B, 20C old Down Bracket Nut P 16A, 20B, 20C Divider Strip Screw RMSM A, 20B, 20C Divider Nut asher F08 16A, 20B, 20C Divider Strip Nut P06 Fixing ardware for cable ladder systems must be ordered separately Finish ot Dip Galvanised, Stainless Steel 304 / 316 or Painted

22 02-19 ACS ORIGINALSTRUT ; CABLE LADDER ACCESSORIES Ladder Accessories - END PLATE, SEPARATOR, CONNECTOR, STANCIONS, OODS LADDER BLIND END PLATE LADDER STRAIGT SPLICE PLATE TYP/CAL TYP/CAL 25 LADDER SEPARATOR Round ead Bolt M8x20 SEPARATOR IT CLAMP 3000 L Flat washer M8 300 ex Nut M TYP/CAL 150 TYP/CAL INSTRUMENT STANCIONS INSTRUMENT OODS REQUIRE L PIPE 2" SC.40 SECTION VIE idth eight BLIND END PLATE STRAIGT SPLICE PLATE LADDER SEPARATOR 0 75 LGEP LGEP4200 LGSSP075 LGSEP LGEP LGEP4450 LGSSP0 LGSEP LGEP LGEP50 LGSSP130 LGSEP LGEP LGEP5300 LGSSP150 LGSEP LGEP LGEP LGEP90 INSTRUMENT OODS INSTRUMENT STANCIONS LGEP9200 As per Require As per Require LGEP9300 (Make to order) (Make to order) LGEP LGEP9600 LADDER SEPARATOR IT CLAMP LGEP LGEP8200 LGSEPCP LGEP LGEP8450 Fixing ardware for cable ladder systems must be ordered separately LGEP8600 * Finish ot Dip Galvanised, Stainless Steel 304 / 316 or Painted

23 02-20 ACS ORIGINALSTRUT ; CABLE LADDER ACCESSORIES Ladder Accessories - CONNECTOR ORIZONTAL SPLICE PLATE SPLICE PLATE 90 O A fast and economical method of changing ladder direction where exact site dimensions must be met, Especially suitable where the angle is less that 45 o or larger angles where the cable bending radius is not important, Also provides a flexible alternative to standard accessory sizes and radii, suits all ACS ORIGINALSTRUT ; aluminium cable ladder systems TYP/CAL VERTICAL SPLICE PLATE TYP/CAL 25 EXPANSION SPLICE PLATE Ideal for making changes in vertical level or direction, Easily adapts to exact site dimensions which may otherwise be difficult to achieve with fixed risers, Cables form their own bending radius spanning between adjacent end-rungs, Also used to form adjustable risers providing flexibility to adjust to any site restrictions DIVIDER STRIP INTERFACE SPACER TYP/CAL Divider Strip is used to separate cables of different voltages or circuits, The notched base permits forming to the required shape Used to separate cable ladder and supports in corrosive environments DROP-OUT t 30 Øx20 Slot R150 DROP-OUT for Ladder To suit ladder width 90 O dimensions 60 eight OR SPLICE PLATE SPLICE PLATE 90 O VER SPLICE PLATE EXP SPLICE PLATE eight Part No. / SAP Des. Part No. / SAP Des. Part No. / SAP Des. Part No. / SAP Des. 75 LGSP075 LG90S075 LGVSP075 LGESP LGSP0 LG90S0 LGVSP0 LGESP LGSP130 LG90S130 LGVSP130 LGESP LGSP150 LG90S150 LGVSP150 LGESP DIVIDER STRIP Part No. / SAP Des. LGDVS075 LGDVS0 LGDVS130 LGDVS150 INTERFACE SPACER Part No. / SAP Des. All Systems LGINFSPC DROP-OUT Part No. / SAP Des. To suit ladder width dimensions Fixing ardware for cable ladder systems must be ordered separately * Finish ot Dip Galvanised, Stainless Steel 304 / 316 or Painted

24 02-21 ACS ORIGINALSTRUT ; CABLE LADDER ACCESSORIES Ladder Accessories - CLAMPS Cover Clips Cover Fixing Recommended Spacing For Cover Clips Service Conditions Design ind Ladder width, mm velocity, Vz (AS1170) Up to and including 50m/s 1.2m 1.2m 1.2m 1.2m exposed external locations Cyclonic Areas 65m/s 0.6m 0.8m 1.2m 1.2m Covers are retained in position by means of cover clips as illustrated. Manufactured from high strength steel, these unique clips, which have no thread components to freeze up, are very quickly installed and are also easily removed or replaced at a later date One size of clip for each ladder system suits both straight and accessory covers Cover Straps Z OLD DON CLAMP 26 Application with J-ook M J OOK COVER CLAMP ex Bolt Mx30 SQ. OLD DON CLAMP L1 Flat asher M L ole Ø 12mm Spring Nut M Type COVER CLIPS Part No. / SAP Des. idth eight J OOK COVER CLAMP 12B LS6CVC12B Part No. / SAP Des. 16A LS6CVC16A 0 75 LGJC40 20B LS6CVC20B LGJC C LS6CVC20C LGJC4300 COVER STRAPS LGJC4450 Type Ladder idth LGJC B LGJC50 12B LGJC B LGJC B LGJC B LGJC A LGJC90 16A LGJC A LGJC A LGJC A LGJC B LGJC80 20B LGJC B LGJC B LGJC B LGJC C 0 SQ.OLD DON 20C 200 Part No. / SAP Des. LGSQ C C 450 Fixing ardware for cable ladder systems must be ordered separately 20C 600 Finish ot Dip Galvanised, Stainless Steel 304 / 316, or Aluminium Z OLD DON CLAMP Part No. / SAP Des. LGZC075 LGZC0 LGZC130 LGZC150 Part No. / SAP Des. LGCVS40 LGCVS4200 LGCVS4300 LGCVS4450 LGCVS4600 LGCVS50 LGCVS5200 LGCVS5300 LGCVS5450 LGCVS5600 LGCVS90 LGCVS9200 LGCVS9300 LGCVS9450 LGCVS9600 LGCVS80 LGCVS8200 LGCVS8300 LGCVS8450 LGCVS8600