Smart Remote. with. QuickGuide

Transcription

1 Smart Remote with QuickGuide 1

2

3 A B 3

4 A Connecting the remote control B Do not cover the microphone 1 Adjusting the volume Press the + or - button. 2 Controlling audio functions Press the button once: Play/pause a track twice: Play next track 3 times: Play previous track 3 Controlling phone functions* To accept/end a call: Press the button. To reject a call: Press and hold the button for 2 seconds. To activate Voice Control: When the Home Screen of your iphone/ipod is displayed, press and hold the button for 2 seconds. Say your voice command. * This function is not supported by all iphone/ipod models. 4

5 Manufacturer Declarations Declaration of Conformity Sennheiser Communications A/S gives a warranty of 24 months on this product. For the current warranty conditions, please visit our website at under Service & Support or contact your Sennheiser partner. Declaration of Conformity This product is in compliance with the essential requirements and other relevant provisions of directives: EMC 2004/108/EC, RoHS 2002/95/EC, WEEE 2002/96/EC. WEEE Declaration Please dispose of this product by taking it to your local collection point or recycling center for such equipment. The declarations are available at 5

6 Statements regarding FCC and Industry Canada FCC Declaration of Conformity (DoC) SNHEISER Model No: MM70i/CX880i/HD218i/HD238i/PX100-IIi/PX200-IIi/IE8i We, Sennheiser Electronic Corporation Strat. Marketing Stefanie Reichert One Enterprise Drive Old Lyme CT USA Tel: +1 (860) , ext. 144 Fax: +1 (860) declare the above device comply with the requirements of Federal Communications Commission. This device complies with Part 15 of the FCC rules. Operation is subjected to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. Responsible Party: John Falcone This device complies with Part 15 subpart b of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

7 are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gener- ates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 7

8 Consult the dealer or an experienced radio/tv technician for help. This class B digital apparatus complies with the Canadian ICES-003. Changes or modifications made to this equipment not expressly approved by Sennheiser electronic Corp. may void the FCC authorization to operate this equipment. 8

9 Made for ipod, Made for iphone and Made for ipad mean that an electronic accessory has been designed to connect specifically to ipod, iphone, or ipad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. iphone and ipod are trademarks of Apple Inc., registered in the U.S. and other countries. ipad is a trademark of Apple Inc. Made for ipod, Made for iphone und Made for ipad bedeuten, dass ein elektronisches Zusatzgerät speziell für den Anschluss an den ipod, das iphone bzw. das ipad konstruiert ist und vom Entwickler dahingehend zertifiziert wurde, dass es den Apple-Leistungsnormen entspricht. Apple übernimmt keine Gewähr im Hinblick auf die Verwendbarkeit dieses Gerätes oder dessen Konformität mit den Standards für Sicherheit und Funkentstörung. ipod und iphone sind in den USA und anderen Ländern eingetragene Marken von Apple Inc. ipad ist eine Marke von Apple Inc. Made for ipod, Made for iphone et Made for ipad signifient qu un accessoire électronique a été développé spécifiquement pour l ipod, l iphone, ou l ipad et que son développeur certifie qu il répond aux normes de performance Apple. Apple n est pas responsable du fonctionnement de cet accessoire ni de sa conformité aux normes réglementaires et de sécurité. ipod et iphone sont des marques déposées d Apple Inc., enregistrées aux Etats-Unis et dans d autres pays. ipad est une marque d Apple Inc. 9

10 In compliance with: USA FCC Part 15, subpart b Canada ICES-003 Europe Australia / New Zealand China 15 10

11 Sennheiser Communications A/S Printed in China Langager 6, 2680 Solrød Strand, Denmark Publ. 06/10 A02 11