ORBYLUX ACCELERATOR Material Safety Data Sheet

Transcription

1 Page 1 / 8 1. Identification of the Preparation and the Company 1.1- Identification of product: Product name : ORBYLUX Accelerator Product code : Product use: Accelerator is an additive for accelerating curing speed of 2K Acrylic products. Especially using at winter season Identification of the company: Manufacturer Address Phone : Fax : Emergency telephone number : : Orbay Kimya İmalat San. Ve Tic. Ltd. Şti. : Organize Sanayi Bölgesi Sarı Cadde 2. Sokak No:1, Nilüfer/BURSA 2. COMPOSITION/INFORMATION ON INGREDIENTS Chemical name Cas No. Concen Classification Xylene % R10, Xn; R20/21, Xi; R38 Flammable 3. HAZARDS IDENTIFICATION Harmful Eye Contact : Risk of serious damage to eyes and prolonged exposure may cause serious irritation. Skin contact : Irritating to skin

2 Page 2 / 8 Ingestion Inhalation : Causes nausea. High concretions may cause unrest and alienation feels. : Harmful by inhalation 4. FIRST AID MEASURES Eye Contact Skin contact Ingestion Inhalation : Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. : Remove contaminated clothing and shoes. Wash skin thoroughly with soap and water or use recognized skin cleanser. Do not use solvents or thinners. : If swallowed, seek medical advice immediately and show this container or label. Keep person warm and at rest. Do not induce vomiting. : Remove to fresh air. Keep person warm and at rest. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. Give nothing by mouth. If unconscious, place in recovery position and seek medical advice. 5. Fire Fighting Measures 5.1- Particular method of intervention and Personal protective equipment Firefighters should always protective equipment and breathing apparatus when handling fire coming from these products Recommendation Cool closed containers exposed to fire with water. Decomposition product includes carbon monoxide. Fire will produce dense black smoke containing hazardous products of combustion. Keep away from sources of ignition Recommended extinguish media In big fires, use alcohol-resistant foam for big fires. Keep containers and surroundings cool with water spray. In small fires, use dry chemical, carbon dioxide, sand and soil Non-recommended extinguish media Do not use water jet.

3 Page 3 / 8 6. ACCIDENTAL RELEASE MEASURES 6.1- General information: Use the recommended personal protective equipment mentioned in part Spilling / Spreading - Avoid contact with skin and hand. Ensure adequate ventilation. Avoid breathing vapour or mist. - Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust) and place in chemical waste container. - Leaking containers put in properly labelled containers. - Wash contaminated area with water. Collect contaminated firefighting water separately. It must not enter the sewage system. - Keep away from ignition sources. Take precaution measures against electrostatic discharge. - Vapours may form explosive mixtures with air. - In case of small amounts, collect with the use of a binding agent like mica, diatomaceous earth, sand. - Dispose according to local regulations. - Inform respective authorities in case of seepage into water course or sewage system. 7. Handling and Storage 7.1- Handling - Use in well-ventilated area. Do not smoke - Take precaution measures against electrostatic discharge. Electrical equipment should be protected to the appropriate standard. - Empty containers may contain hazardous substances. Keep container tightly closed. - Keep away from heat, sparks and flame - Avoid inhalation of vapour and spray mist. - Never use pressure to empty. Container is not a pressure vessel Storage. - Keep away from heat, sparks and flame - Keep away from source of ignitions

4 Page 4 / 8 - Containers that have been opened must be carefully resealed and kept upright to prevent leakage. - Observe label precautions. Store in a dry well ventilated place away from sources of heat and direct sunlight - Store away from incompatible materials. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Provide adequate ventilation. Where reasonably practicable, this should be achieved by the use of local exhaust ventilation and good general extraction. When workers are facing concentrations above the exposure limit they must use appropriately certified respirators Components CAS-No Type: Control parameters Value Value [ppm] [mg/m 3 ] Source Xylene TWA STEL TWA STEL 100 ppm 150 ppm 100 ppm 150 ppm 435 mg/m mg/m mg/m mg/m 3 OSHA PEL OSHA PEL ACGIH TLV ACGIH TLV Personal protective equipment Eyes Skin Cloth Inhalation : Use appropriate protective glasses : Use appropriate protective gloves : Wear protective clothing to avoid contact with the skin : If necessary use suitable respiratory protective equipment 9. PHYSICAL AND CHEMICAL PROPERTIES 9.1. General Information Color : Transparent Odor : Characteristic, dominated by xylene

5 Page 5 / Significant Health, Safety and Environmental Information - ph : Not Concerned - Boiling point : Not Concerned - Flash point : 22 C - Auto ignition temperature : Not Concerned - Explosive properties : Not Concerned - Oxidizing properties : Not Concerned - Vapor density : Not Concerned - Density : 0,87 ±0,1 g/ml - Solubility - in the water : Insoluble - in the oil : Insoluble - Partition coefficient (n-octanol/ water) : Not Concerned - Viscosity : Not Concerned - Evaporation density : Not Concerned - Evaporation speed : Not Concerned 10. Stability and Reactivity Stable under recommended storage and handling conditions. The product is not reactive under normal conditions Conditions to avoid - Influence of sunrays - Heat, flame and spark Incompatible materials Stable under recommended storage and handling conditions (see section 7). Keep away from the following materials to prevent strong exothermic reactions; - Oxidizing agents - Strong alkalis - Strong acids Hazardous decomposition materials Decomposition materials not occur under recommended storage and handling conditions.

6 Page 6 / TOXICOLOGICAL INFORMATION No experimental toxicological data on the preparation as such is available. Prolonged contact has irritant effect on skin and eyes. Sensitizing effect through inhalation is possible by prolonged exposure Acute toxicity Product/ingredient name Result Species Dose Exposure Xylene LD50 Dermal Rabbit >5 g/kg Ecological Information No available data about dangerous for ecology. Do not allow to enter drains or watercourses Eco toxicity : Not Concerned Mobility : Not Concerned Persistence and availability : Not Concerned Bio accumulative potential : Not Concerned Other adverse effects : No specific data on the product Product/ingredie nt name Result Species Exposure Xylene Acute LC ug/l Marine Water Acute LC to 4093 ug/l Fresh water Crustacean (Palaemonetes pugio ) Fish ( Salmon ) 0.6 g 48 hours 96 hours 13. DISPOSAL CONSIDERATIONS Dispose of according to all federal, state and local applicable regulations. If you want to re-use the product, please contact with the manufacturing company, Orbay Kimya İmalat San. Ve Tic. Ltd. Şti.

7 Page 7 / Transport Information ADR/RID ADN/ADNR IMDG IATA 14.1 UN number UN1263 UN1263 UN1263 UN Transport document name Paint related material (n-butyl asetat) Paint related material (n-butyl asetat) Paint related material (n-butyl asetat) 14.3 Class Paint related material (n-butyl asetat) 14.4 Packing group 14.5 Environmental hazards III III III III NO YES NO NO 14.6 Special precautions for user Transport within user s premises: Always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage. Transport within user s premises: Always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage. Transport within user s premises: Always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage. Transport within user s premises: Always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage. 15. REGULATORY INFORMATION EU regulations: The product has been classified and marked in accordance with EU 1999/45/EC Directives. Risk phrase Safety phrase : R10- Flammable : S51- Use only in well-ventilated areas.

8 Page 8 / 8 VOC for Ready-for-Use Mixture Europe inventory Industrial use : 2004/42/EC IIB/a : 850 g/l (2007). <=840 g/l VOC : All components are listed or exempted. : The information contained in this safety data sheet does not constitute the user s own assessment of workplace risks, as required by other health and safety legislation. The provisions of the national health and safety at work regulations apply to the use of this product at work. 16. OTHER INFORMATION Full text of R-phrases Full text of S-phrases R10: Flammable R20/21: Harmful by inhalation and contact with skin. R38: Irritating to skin R66: Repeated exposure may cause skin dryness or cracking R67: Vapours may cause drowsiness and dizziness S16: Keep away from sources of ignition - No smoking S23: Do not breathe vapor S24/25: Avoid contact with skin and eyes S29: Do not empty into drains S33: Take precautionary measures against static discharges S36/37: Wear suitable protective clothing and gloves S45: In case of accident or if you feel unwell seek medical advice immediately (show the label where possible) S59: Refer to manufacturer/supplier for information on recovery/recycling Notice of reader The information in this SDS is based on the present state of our knowledge and on current laws. The product is not to be used for purposes other than those specified under section 1 without first obtaining written handling instructions. It is always the responsibility of the user to take all necessary steps to fulfill the demands set out in the local rules and legislation. The information in this SDS is meant to be a description of the safety requirements for our product. It is not to be considered a guarantee of the product's properties.