Arduino Development for Beginners. By Richard Coombs and Przemyslaw Woznowski

Transcription

1 Arduino Development for Beginners By Richard Coombs and Przemyslaw Woznowski

2 Contents Introduction Board Types Shields Background Software Hardware Programming Language/IDE Setup Demo Wireless Cardiff Uni Resources

3 Our Experience What? Beginners Arduino Workshop. Who? tinker.it - the UK's leading provider of Arduino training. Aim? a basic introduction to the Arduino platform for artists, designers and hobbyists.

4 Introduction

5 What? Open-source electronics prototyping platform Hardware (circuit board) Micro-controller Memory to store code Pins for input/output to/from the CPU Connection for computer Software (IDE) Written in Java Designed for novice programmers

6 Why? Created in Italy 2005 to be: Inexpensive Cross-platform Easy to use Extensible Arduinos are for Tinkering!

7 Tinkering "Tinkering is what happens when you try something you don't quite know how to do, guided by whim, imagination and curiosity" [1] Patching Circuit bending Toy hacking Keyboard hacks

8

9 Starter Kit

10 Board Types

11 Duemilanove

12 Mega

13 Nano

14 LillyPad

15 Shields Boards which can be mounted on an Arduino to add extra functionality

16 Background sensor - an electronic device used to measure a physical quantity such as temperature, pressure or loudness and convert it into an electronic signal of some kind (e.g a voltage). [2] actuator - a mechanism that puts something into automatic action. [3]

17 The Interactive Device Most of the objects build using Arduino follow, so called Interactive Device pattern. It is an electronic circuit that is able to sense the environment using components called sensors and processing the information through behaviour implemented as software. The device will then be able to interact back with the world using actuators. [1]

18 Ingredients needed Software/ Development Environment Hardware Program sketch Often patience

19 Software Cross platform - runs on Windows, Mac OS X and Linux Written in Java and based on Processing programming language, avr-gcc, and other open source software. Arduino IDE designed to introduce programming to artists and other users unfamilair with software development. Includes a code editor with brace matching, automatic indentation, API lookup, capable of compiling and uploading programs to the board with one click

20 Software cont. Processing - Processing is an open source programming language and environment for people who want to program images, animation, and interactions. It is used by students, artists, designers, researchers, and hobbyists for learning, prototyping, and production. It is created to teach fundamentals of computer programming within a visual context and to serve as a software sketchbook and professional production tool. [4]

21 Hardware Arduino board USB (standard A-B) cable Broken (or not) toys, keyboards, etc. Resistors, potentiometers, LEDs, buttons, etc. Wires, breadboards

22 Program Sketch Arduino IDE comes with a C/C++ library called Wiring, which makes input/output operations easier. Programs are written in C/C++ but user only has to define 2 functions to make a runnable program: setup() - called once at the start of a program. This is where you initialize things. loop() called repeatedly until the board is powered off.

23 Programming Language Code written in Arduino is translated into C language. Passed on to the avr-gcc compiler that makes the translation into the language understood by the microcontroller. Uploaded to the board.

24 IDE Setup Download and install Arduino ( cc/en/main/software) and Processing ( org). Connect the board to the USB port on your computer. Run Arduino IDE. Set the correct port your device is using Tools -> Serial Port -> select port beginning with /dev/cu.usbserial- Set the Arduino board type your are using Tools -> Board -> select correct board type (printed on the chip)

25 Hello World Open: File -> Examples -> Digital -> Blink Before uploading the code, you can verify it (Sketch > Verify/Compile), however this is not compulsory, as if there are errors while sending program to the board, Arduino will abort the operation and print appropriate warnings/exceptions. Connect your LED to port 13 and GND (Ground)

26 LED LEDs are directional components. That means if you put it in backwards it will not work! To help you put the LED in right, the LED factory cuts the legs at different lengths. The longer leg goes in the hole marked 13 and the shorter one goes in the hole marked GND

27 Hello World cont. Make sure your board is connected via USB cable Click the Upload button or select File -> Upload to I/O Board Watch for any errors (if wrong board/port selected or bugs in the code) Hopefully it works Let there be light

28 Button Demo Open: File -> Examples -> Digital -> Button Build the circuit as described in the file, or Look up the website address in this file, in order to see the picture of the circuit and its description: cc/en/tutorial/button Connect Arduino via USB Upload it to the board IMPORTANT: Always disconnect the board while building the circuit!!!

29 Analog Input Open: File -> Examples -> Analog -> Analog Input Build the circuit as described in the file, or Look up the website address in this file, in order to see the picture of the circuit and its description: cc/en/tutorial/analoginput Connect Arduino via USB Upload it to the board

30 Graph Open: File -> Examples -> Communication > Graph Circuit previously built can remain the same Open Processing Copy and paste code commented out in Arduino to Processing Run the program from Processing

31 Simple Paint App In Arduino: Open: File -> Examples -> Firmata > StandardFirmata Upload it to the board In Processing open and run test program: File > Sketchbook -> Libraries -> arduino -> examples > arduino_input In processing open and run: File -> Sketchbook > drawing_app

32 Wireless Cardiff Sensor Network project (CaSeNet?) CaSeNet to use Bluetooth sensors Aduino is compatible with Pachube Possible to use Arduinos for sensor nodes? Arduino + Bluetooth shield Bluetooth shield could not discover devices Arduino + ZigBee shield Some progress made Couldn't get it to work Couldn't keep shields to continue work

33 Cardiff University Matthew Morgan is setting up a group for Arduino developers Held every fortnight Undergraduate/Postgraduate students/lecturers/staff Hopefully we can get some funding and buy couple of boards Aim: exchange experiences, share ideas, build something funky that can be used/displayed in our department Interested? On your way out put your name down on the Arduino Cafe list.

34 Resources Forum, tutorials, blog, useful links, software: Shop: Training:

35 Questions? Comments? Feedback?

36 References [1]. Banzi, M., Getting Started with Arduino 3rd release [2]. [3]. [4].