DENTSPLY International Safety Data Sheet [SDS] Form 0280-FM Rev 6

Transcription

1 DENTSPLY International Safety Data Sheet [SDS] Form 0280-FM Rev 6 Date Issued: 10/1/14 Date Revised: 10/1/14 Revision Number: 1 Product Identifier [Part/Item Number(s)]: Class PRODUCT IDENTIFICATION Trade Name (as labeled): MYSTIQUE MB Ceramic Bracket Chemical Name/Classification: Aluminum Oxide U.N. Number: U.N. Dangerous Goods Classification: Recommended Use: For professional dental applications. Restrictions on Use: None Manufacturer/Supplier Name: DENTSPLY GAC Manufacturer/Supplier Address: One CA Plaza, Suite 100 Islandia, NY Manufacturer/Supplier Telephone Number: Emergency Contact Telephone Number: address: gac.info@dentsply.com 2. HAZARD(s) IDENTIFICATION Hazard/Danger Classification: Category 3 (Respiratory tract:irritation) Category 1 (Lungs; Inhalation) Health Environmental Physical Associated Hazards: Hazard Statements May causes irritation to organs. Cause damange to organs through prolonged or repeated exposure. Signal Word Precautionary Statements EU Classification: EU Risk (R) and Safety (S) Phrases:

2 3. COMPOSITION AND INFORMATION ON INGREDIENTS 4. FIRST-AID MEASURES Routes of Exposure Eye Skin Inhalation First Aid Instructions See specialist for medical treatment. Be cautious of external injury caused by fragments such as cutting power. N/A Ingestion Most important symptoms of exposure See specialist for medical treatment. Other none Note to Physicians (Treatment, Testing, and Monitoring) 5. FIRE-FIGHTING MEASURES Suitable Extinguishing Media: Fire Fighting Procedures: Specific Hazards Arising from the Chemical: Precautions for Fire Fighters: As this product is nonflammable, use extinguishing media appropriate for the surrounding fire. All personnel engaged in firefighting must use appropriate protective equipment. All personnel engaged in firefighting must use appropriate protective equipment.

3 Recommended Protective Equipment for Fire Fighters: EYES/FACE SKIN RESPRIATORY THERMAL 6. ACCIDENTAL RELEASE MEASURES Personal Precautions, PPE and Emergency Procedures: : For cleaning up, on account of possibility of a slight injury by fragments, wear protective gloves, a dust respirator and safety glasses. Especially, in the globular and granulate are spilled over, watch one s step. The scattered products should be swept up and packed into a hermetic container. Environmental Precautions: Implement measure to prevent the scattered products from being re-scattered. Take measures to prevent the product from discharging into sewage, river and sea. Methods and Materials for Containment and Clean-up: For cleaning up, on account of possibility of a slight injury by fragments, wear protective gloves, a dust respirator and safety glasses. Especially, in the globular and granulate are spilled over, watch one s step. The scattered products should be swept up and packed into a hermetic container. Recommended Personal Protective Equipment for Containment and Clean-up: EYES/FACE SKIN RESPRIATORY THERMAL 7. HANDLING AND STORAGE Precautions for Safe Handing: Do not handle the container in a rough manner leading to breakage. In case of breakage of the product, for handling, on account of possibility of a slight injury by fragments, wear protective gloves, a dust respirator and safety glasses. Especially, if the globular and granulate products are spilled over, quickly put the products into a container, as they are slippery on the floor. Conditions for Safe Storage: Store the products in a container. Do not put the container directly under the sun. Packaging materials: Use the container capable of withstanding load or impact from outside, such as cardboard boxes or those made of plastics, and so on. Technical measures: in case of dust occurrence, ventilate with ventilatiors. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Occupational Exposure Limits: Biological Exposure Limits: Appropriate Engineering Controls:

4 Individual Protection Measures (PPE) Specific Eye/face Protection: Safety glasses, safety goggles Specific Skin Protection: Protective gloves (made of rubber, vinyl, polyethylene and so on) Specific Respiratory Protection: Dust respirator ( in case dust occurrence) Specific Thermal Hazards: Recommended Personal Protective Equipment EYES/FACE SKIN RESPRIATORY THERMAL Environmental Exposure Controls: General Hygiene Considerations and Work Practices: Protective Measures During Repair and Maintenance of Contaminated Equipment: 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance: Explosive limits: Odor: Odorless Vapor pressure: Odor threshold: Vapor density: ph: Relative density: Melting/freezing point: N/A Solubility: Insoluble Initial boiling point and range: Flash point: Evaporation rate: Flammability: Partition coefficient: n- octanol/water: Auto-ignition temperature: Decomposition temperature: Viscosity: Explosive Properties: Oxidizing Properties: 10. Stability and Reactivity Reactivity: This product is considered a stable material under normal storage and handling conditions. Chemical Stability: This product is considered a stable material under normal storage and handling conditions.

5 Possibility of Hazardous Reactions: Conditions to Avoid: N/A Incompatible materials: Hazardous Decomposition Products: 11. TOXICOLOGICAL INFORMATION Potential Health Effects: Eyes: N/A Skin: N/A Ingestion: N/A Inhalation: N/A Chronic Health Effects: Carcinogenicity: Mutagenicity: Medical Conditions Aggravated by Exposure: Acute Toxicity Data: LCL0=357 mg/m3 (mouse 60 days, inhalation)2) Reproductive Toxicity Data: Specific Target Organ Toxicity (STOT): Single Exposure: Category 3 (Respiratory tract; Irritation) Repeated Exposure: Category 1 (Lungs; Inhalation) 12. ECOLOGICAL INFORMATION Toxicity: Persistence and Degradability: Bio-accumulative Potential: Mobility in Soil: Other Adverse Effects: Results of PBT/vPvB Assessment:

6 13. DISPOSAL CONSIDERATIONS Regulations: Dispose of in accordande with local regulations. Properties (Physical/Chemical) Affecting Disposal: Waste Treatment Recommendations: 14. TRANSPORT INFORMATION UN Identification Number: UN Proper Shipping Name: Transport hazard class(es): Packing Group: Special precautions for user: See No. 7 HANDLING AND STORAGE. Caution against break of package. Store the products in a container. Do not put the container directly under the sun. Packaging materials: Use the container capable of withstanding load or impact from outside, such as cardboard boxes or those made of plastics, and so on. 15. REGULATORY INFORMATION U.S. Federal Regulations Comprehensive Environmental Response and Liability Act of 1980 (CERCLA): Industrial safety and health Law (No. 189 Aluminum Oxide) Toxic Substances Control Act (TSCA): Clean Water Act (CWA): Clean Air Act (CAA): Superfund Amendments and Reauthorization Act (SARA) Title III Information: SARA Section 311/312 (40 CFR 370) Hazard Categories: Immediate Hazard: Pressure Hazard: Delayed Hazard: Reactivity Hazard: Fire Hazard:

7 This product contains the following toxic chemical(s) subject to reporting requirements of SARA Section 313 (40 CFR 372): Components C.A.S. # WT % State Regulations California Proposition 65: This product contains the following chemicals(s) known to the State of California to cause cancer, birth defects or reproductive harm (if blank, the product does not contain Proposition 65 regulated chemicals): This product does not contain any chemicals, which are on the California Proposition 65 list. Components C.A.S. # WT % International Regulations Canadian Environmental Protection Act: Canadian Workplace Hazardous Materials Information System (WHMIS): European Inventory of Existing Chemicals (EINECS): European Chemical Agency (ECHA) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals): Date of SDS Preparation/Revision: 10/01/ OTHER INFORMATION This MSDS was prepared in accordance with the requirements of ISO and to be used only for this product. The information contained in the MSDS is believed to be valid and accurate. However, Dentsply GAC Inc. makes no warranty, ither expressed or implied, as to the completeness of information in all possible condition. Data Sources: Supplier s MSDS Specification