Material Safety Data Sheet

Transcription

1 Material Safety Data Sheet Product code: JJCUSADML Revision date: 09/25/ IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING Supplier: Johnson and Johnson Consumer Companies, Inc. 199 Grandview Road Distributor Skillman, NJ Emergency telephone number: Product name: AVEENO DAILY MOISTURIZING LOTION Product code: JJCUSADML Synonyms: Formula #: # EPA registry #: RTECS #: Intended Use: For external use only. 2. COMPOSITION/INFORMATION ON INGREDIENTS This product formulation contains no ingredients at their given percentages that are considered hazardous to your health. 3. HAZARDS IDENTIFICATION Emergency overview: Properties affecting health: Principle routes of exposure: Oral: Eye contact: Skin contact: Ingestion: Physico-chemical properties: Hazard information: Target organ effects: Reproductive effects: Mutagenic effects: Sensitization: Unknown on product Contact with eyes may cause irritation. No effects expected. No hazards resulting from material as supplied. Carcinogenicity rating: Page 1 of 6

2 Signs and symptoms: Medical conditions aggravated by exposure: known. 4. FIRST AID MEASURES Eye contact: Ingestion: Skin contact: Protection of first-aiders: Notes to physician: In the case of contact with eyes, rinse immediately with plenty of water for 15 minutes and seek medical attention. If ingested, seek medical attention immediately and show the label. Move to fresh air immediately. If experiencing difficulty breathing, seek medical attention. In the case of skin irritation or allergic reactions see a physician. No information available. 5. FIRE-FIGHTING MEASURES Flash point ( F): Flash point ( C): Autoignition temperature: Flammable limits in air - lower (%): NFPA rating: HMIS/ NFPA rating and classification: Not determined Not determined Not determined Fire fighting information: Suitable extinguishing media: Extinguishing media which must not be used for safety reasons: Specific methods: Special protective equipment for firefighters: Hazardous combustion products: Explosivity: Explosion limits: lower: upper: Use any extinguishing media which is suitable for the surrounding fire. Wear a self-contained breathing apparatus and full protective gear. 6. ACCIDENTAL RELEASE MEASURES Personal precautions: Ensure adequate ventilation. Page 2 of 6

3 Environmental precautions: Methods for cleaning up: No special environmental precautions required. Wipe up with adsorbent material (e.g. cloth, fleece) 7. HANDLING AND STORAGE Handling: Technical measures/precautions: Safe handling advice: No special technical protective measures required. under normal processing. Storage: Technical measures/storage conditions: Incompatible products: Store per labeled instructions. No special restrictions on storage with other products. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Engineering controls: Eye protection: Hand protection: Skin and body protection Respiratory protection: Other/general protection: Ensure adequate ventilation. Eye protection recommended during production of product. Protective gloves recommended when manufacturing product. Skin protection recommended when manufacturing product. required. required. 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance: Thick, creamy, off-white emulsion Physical state: Emulsion Color: Off-white ph: Odor: Characteristic of benzaldehyde 10. STABILITY AND REACTIVITY Chemical stability: Hazardous polymerization: Hazardous decomposition products: Materials to avoid: Conditions to avoid: Stable under recommended storage conditions. Hazardous polymerization does not occur. 11. TOXICOLOGICAL INFORMATION Acute toxicity Local effects Page 3 of 6

4 Oral: Eye irritation Contact with eyes may cause irritation. Skin irritation: No effects expected. Chronic toxicity Oral: Dermal: Subchronic toxicity Oral: Dermal: Specific effects Corrosive effects: Sensitization: Target organ effects: Mutagenic effects: Reproductive effects: Developmental effects: Carcinogenic effects: 12. ECOLOGICAL INFORMATION Ecotoxicity: Ecotoxicity effects: Aquatic toxicity effects: Mobility: Persistence / degradability: Bioaccumulation: Degradation: This product has no known eco-toxicological effects. This product has no known aquatic toxicological effects. 13. DISPOSAL CONSIDERATIONS Waste from residues / unused products: Contaminated packaging: Methods for cleaning up: Waste disposal must be in accordance with appropriate US, Federal, State and International regulations. This product, if unaltered by use, may be disposed of by treatment at a permitted facility or as advised by your local hazardous waste regulatory authority. Wipe up with adsorbent material (e.g. cloth, fleece) 14. TRANSPORT INFORMATION DOT: DOT UN-No: DOT shipping name: Hazard class: Not regulated Page 4 of 6

5 Subsidiary risk (hazard class): DOT reportable quantity (lbs): IMO/IMDG: Hazard class: IMDG page: IMDG-labels: MFAG table No.: Proper shipping name: UN/Id No.: ADR/RID: Hazard class/packing group: Item: ADR/RID-labels: UN/Id No.: Proper shipping name: TREM-card: IATA/ICAO: Hazard class: Proper shipping name: ID/UN No.: IATA - label: ERG # TDG (Canada): Status: Not regulated Not regulated 15. REGULATORY INFORMATION SARA (311, 312) hazard class: Immediate health: Delayed health: Fire: Sudden Release of Pressure Hazard: Reactivity: TSCA inventory list: WHMIS: WHMIS trade secret: WHMIS hazard class: Canada DSL inventory list: Listed under TSCA: Yes Listed on DSL: Yes Notes: 1. SARA = Superfund Amendments and the Reauthorization Act. 2. CERCLA = Comprehensive Environmental Response, Compensations and Liability Act. 3. FIFRA = Federal Insecticide, Fungicide and Rodenticide Act 4. TSCA = Toxic Substance Control Act 5. WHMIS = Canadian Workplace Hazardous Materials Information System 6. This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations (CPR) and the MSDS contains all of the information required by the CPR. Page 5 of 6

6 16. OTHER INFORMATION This data sheet contains changes from the previous version in section(s): Additional advice Literary Reference: MSDS format: North American Format - U.S. and Canada This Material Safety Data Sheet was prepared in accordance with OSHA 29 CFR Disclaimer: The information and recommendations contained herein are based upon tests believed to be reliable. However, Johnson and Johnson does not guarantee their accuracy or completeness NOR SHALL ANY OF THIS INFORMATION CONSTITUTE A WARRANTY, WHETHER EXPRESSED OR IMPLIED, AS TO THE SAFETY OF THE GOODS, THE MERCHANTABILITY OF THE GOODS, OR THE FITNESS OF THE GOODS FOR A PARTICULAR PURPOSE. Adjustment to conform to actual conditions of usage maybe required. Johnson and Johnson assumes no responsibility for results obtained or for incidental or consequential damages, including lost profits arising from the use of these data. No warranty against infringement of any patent, copyright or trademark is made or implied. End of Safety Data Sheet Page 6 of 6