THE SIMBARS BOLLARD COLLECTION
|
|
- Kenneth Marsh
- 7 years ago
- Views:
Transcription
1 THE SIMBARS BOLLARD COLLECTION CRAFTSMANSHIP - ENHANCEMENT - SECURITY Assessed to ISO 9001 LPCB Certificate N o 932 SIMBARS Bollard Solutions Tel Fax info@simbars.co.uk
2 About Simbars Simbars was established by engineer, Martin Simmons, during the late 1980 s and incorporated in 2003 as Simbars (UK) Ltd; subsequently gaining an enviable reputation for reliability and consistency by manufacturing to the highest standards. This quality has been recognised and Simbars (UK) Ltd is an ISO 9001 certified company. Our quality systems and factory are inspected every six months and audited by the Loss Prevention Certification Board. The Loss Prevention Certification Board (LPCB) is the leading international certification and approval body in security and fire protection. LPCB approvals are recognised by governments and regulatory authorities around the world. Simbars is continually working and testing with the LPCB on innovative new product developments. Simbars (UK) Ltd street furniture manufacturing takes the experience and expertise gained over three decades and combines this with contemporary design to provide civil engineers, architects and street furniture suppliers with an exciting source for high quality and cost effective products. MATERIALS AND FINISHES Simbars (UK) Ltd is UKAS ISO 9001 certified for design and manufacture. This ensures a consistent level of quality and full traceability of materials and processes. STAINLESS STEEL SATIN POLISHED At Simbars we only use certified grades of stainless steel, grade 304L is used as our standard grade. This is then polished to a beautiful fine satin finish. Grade 316 is available on request. STAINLESS STEEL BRIGHT POLISHED Our stainless steel bright polished finish is achieved by being mechanically polished, providing a reflective finish with a high degree of image clarity. RILSAN NYLON COATING BLACK The ultimate long lasting thermoplastic coating for steel. At Simbars we have been coating with this material for over 20 years. Rilsan nylon is extremely hard wearing, scratch and chip resistant and warm to the touch. The products are fully shot blasted before being heated to 350 c and then dipped into our fluidized bed of Rilsan powder. On contact with the hot surface the Rilsan melts and flows out to a smooth homogeneous coating fully encapsulating the product, a process known as Rilsanisation. Rilsan is made from a renewable plant source and provides the perfect solution to corrosion without costing the earth. GALVANIZED STEEL Recognised for being long lasting and corrosion resistant. All our galvanizing is certified to BS EN ISO 1461 and is carried out after final manufacture ensuring a consistently high product quality. GALVANIZED & POWDER COATED Used where a specific colour is required. We sweep blast the products after galvanizing but before coating to produce a key to ensure good adhesion of the powder to the galvanized surface minimising the risk of chipping. A large range of RAL colours are available. BS EN SPECIFICATIONS: Hot dip galvanized finish to BS EN ISO 1461 Stainless Steel type BS EN , (304L) Steel Tube to EN10219 S235
3 Flat Cap Bollard Bollard with flat cap, making this the most cost effective and simplistic bollard available. The clean simple form makes this bollard a true classic. Stainless Steel Grade 316 available, Reflective Bands and Recessed Grooves. ST50-BL ST50-GA ST50-SS ST50-GR + Powder Coated ST50-BP ST50-BP 3 Semi Dome Bollard Our most popular style, the partially rounded cap forms a perfect radius top. Stainless Steel Grade 316 available, Reflective Bands and Recessed Grooves. ST51-BL ST51-GA ST51-SS ST51-GR + Powder Coated ST51-BP
4 Mitre Cap Bollard A very popular choice, the mitre top is formed at a 45 degree angle. Stainless Steel Grade 316, Reflective Bands and Recessed Grooves. ST52-BL ST52-GA ST52-SS ST52-GR + Powder Coated ST52-BP 4 Ground Sockets Our range of heavy duty ground sockets enable secure mounting of our removable bollards. Importantly, in the closed position they do not present a trip hazard. A simple padlock fitting securely locks the bollard in position. Standard overall 350mm (other heights are available). Manufactured to suit 60mm to 450mm bollards. Extra option: Stainless Steel Grade 316.
5 Surround Style Ground Socket Manufactured from steel and with a galvanized finish to ensure a maintenance free life. Galvanized Finish to BSEN ISO To suit 60mm diameter to 450mm diameter bollards. ST47-GA 5 Stainless Steel Surround Style Ground Socket, lid and socket top are satin polished. To suit 60mm diameter to 450mm diameter bollards. Extra option: Stainless Steel Grade 316. ST47-SS Hinged Style Ground Socket, lid and socket top are satin polished. To suit 60mm diameter to 450mm diameter bollards. Extra option: Stainless Steel Grade 316. ST48-SS
6 Bollards with Anti-Ram Galvanized Steel Cores Combining the good looks of all of our stainless steel bollards, the addition of a high grade steel core gives added strength for situations where anti ram properties are required. Fixing style: Submerged. Stainless Steel Grade 316, Recessed Grooves and Reflective Bands. ST58-SS ST58-BP 6 Bollards with Recessed Groove The machined grooves in our range of bollards give an added dimension. Grooves can be polished to contrast with the shank of the bollard in stainless steel. Additionally they can make an excellent feature or tape can be applied. We can, of course, machine any width or number of grooves required. Minimum order quantity: Submerged, Bolt Down or Removable with a secure locking ground socket box. Stainless Steel Grade 316, Extra Grooves and Reflective Bands. 5 pieces. ST59-BL ST59-GA ST59-SS ST59-GR + Powder Coated ST59-BP
7 Bollard, Satin Polished, with two Bright Polished Grooves A selection of different styled caps available, complete with two bright polished 50mm wide grooves. Extra option: Stainless Steel Grade 316. ST61-SS Satin Polished, with two bright polished grooves ST61-BP Bright Polished, with two satin polished grooves 7 Bollards with Double Recessed Groove The machined grooves in our range of bollards give an added dimension. Grooves can be polished to contrast with the shank of the bollard in stainless steel. These grooves can make an excellent feature or tape can be applied. We can machine any width or number of grooves required. Minimum order quantity: Submerged, Bolt Down or Removable with a secure locking ground socket box. Stainless Steel Grade 316, Extra Grooves and Reflective Bands. 5 pieces. ST64-BL ST64-GA ST64-SS ST64-GR + Powder Coated ST64-BP
8 Three Sided Bollard A formed triangular section with a mitre cap gets this bollard noticed! Widths: 75mm to 250mm. Stainless Steel Grade 316 and Reflective Bands. ST66-BL ST66-GA ST66-SS ST66-GR + Powder Coated ST66-BP Bright Polished 8 Four Sided Bollard A square style with cap options of pointed or mitre Widths: 60mm to 200mm. Stainless Steel Grade 316 and Reflective Bands. ST65-BL ST65-GA ST65-SS ST65-GR + Powder Coated ST65-BP Bright Polished
9 Ellipse Bollard Formed to give a true ellipse, a mitre top adds to the visual appeal of this design. Size available: 200mm x 100mm. Stainless Steel Grade 316, Recessed Grooves and Reflective Bands. Minimum order quantity: 10 pieces. ST69-SS ST69-BP 9 Record Groove Bollard Bollard with record style grooves, where a fine pitch groove is cut in a recess. These can be painted or polished. Diameter : Stainless Steel Grade 316 and Painted Grooves on Stainless Steel. ST70-SS
10 Radius Dome Bollard with Groove The smooth radius formed cap makes this style particularly pedestrian friendly. 73mm, 89mm, 114mm, 168mm and 219mm. Stainless Steel Grade 316, Recessed Groove and Reflective Bands. ST67-SS ST67-BP Bright Polished 10 Flat Sided Oval Bollard With flat sides and full radiused edges, caps can be flat or mitred. Size available: 200mm x 100mm. Stainless Steel Grade 316 and Reflective Bands. Minimum order quantity: 10 pieces. ST68-SS ST68-BP
Colonnade Security Pipe
Description: Round & Square downpipe formed from extruded 6060 T4 aluminium in various sizes (Ø83mm, Ø108mm, 83x83 mm & 108x108mm*) & supplied with a complete range of accessories i.e. Offsets, bends,
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More informationRollers. from the UK s largest roller manufacturer. Quality Performance Reliability
Rollers from the UK s largest roller manufacturer Quality Performance Reliability 42 Index Gravity Rollers Light to Medium Duty 4 Heavy Duty 5 Plastic Rollers 6 Stainless Steel Rollers 7 Grooved Rollers
More informationEVEN FOR SMALL QUANTITIES WE GET STARTED RIGHT AWAY...
EVEN FOR SMALL QUANTITIES WE GET STARTED RIGHT AWAY... Because we produce in-house, so we don t have far to go. Our decisions are not based on when and who can do what in Asia; instead, we look at what
More informationK17.11 DOOR BOLTS K17 DOORS 01.09.2013
K17 DOORS K17.11 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Locking set series 86000...K17.11.03 2.
More informationFixed Vertical Access Ladders
Fixed Vertical Access Ladders Index 1. Fixed Vertical Access Ladders 2. Aluminium Fixed Vertical Access Ladders: Standard Specification 3. Aluminium Fixed Vertical Access Ladders: Technical Drawing 4.
More informationGrilles & Diffusers Series LFP Incorporating
Grilles & Diffusers Incorporating Series LFP Produce a stable linear throw, creating an area of clean air with minimal diffusion Perfect for areas like clean rooms and operating theatres Tile replacer
More informationModuSec. Secure and efficient IT room solutions. Turnkey Modular Construction Fast clean build to any size or shape
ModuSec Secure and efficient IT room solutions Turnkey Modular Construction Fast clean build to any size or shape Room in room Standalone external build Transportable Modusec SR Options Modusec SR Options
More informationELECTRIC I FIRES. CW036_Electric_brochure_art.indd 1
ELECTRIC I FIRES CW036_Electric_brochure_art.indd 1 A WARM WELCOME It s never been so easy to get the warm inviting atmosphere of a real flame fire with all the convenience, versatility and efficiency
More informationCOASTAL SERIES. 316 Solid Stainless Steel Door Furniture
COASTAL SERIES 316 Solid Stainless Steel Door Furniture DORMA COASTAL SERIES SOLID STAINLESS STEEL ROSE AND PLATE DOOR FURNITURE DORMA in Australia and New Zealand is developing into a leading manufacturer
More informationSTB Series Enclosures
STB Series Enclosures Features/Applications: The STB series of sheet steel enclosures are designed to meet the requirement for distribution and lighting junction boxes. Available in 14 sizes with standard
More informationAluminium Standard. Technical Data. Included in delivery
luminium Standard UL / cul Robust aluminium enclosure for mechanical engineering and automation technology Fixing options for s and mounting plates Usable in wide temperature area Technical ata aterial:
More informationInformation Technology Solutions. Feeder Pillars
Feeder Pillars D ES IG NE R A ND M ANUFA C TU RE R Lighting Design Solutions are designers and manufacturers of a wide range of specialist street lighting furniture along with structural and architectural
More information2006-2007 Safeguard Storm Doors Beauty, the security of advanced design, and the guarantee of a lifetime.*
2006-2007 Safeguard Storm Doors Beauty, the security of advanced design, and the guarantee of a lifetime.* 6 Designs To choose! Like all classic designs, Elite embraces balance and proportion while using
More informationLift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge...
Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge... Pivot
More informationFasteners and screw threads
ISO Standards Handbook: Fasteners and screw threads Volume 2: Product standards Contents Part 3 : Product standards 2001, Ed. 5, 1094 p., ISBN 92-67-10345-8 3.1 External drive hexagon head bolts and screws
More informationREHAU Windows, doors and conservatories
Inspiring design, beautifully made REHAU Windows, doors and conservatories 01 WINDOWS & DOORS Whatever the style of your property, REHAU offer the right products to suit your home. Time to feel the difference
More informationwww.cornholesupplies.com
www.cornholesupplies.com How To Build Regulation Cornhole Boards Home of the Original Cornhole Bags and Boards Supply List: 1-4' X 8' Piece of Plywood (pre sanded) 4-2" X 4" X 8' Studs (2 by 4s make sure
More informationSSG PRODUCTS FOR SHIPS AND OFFSHORE
6.1 SSG PRODUCTS FOR SHIPS AND OFFSHORE SSG workshop cabinets, tables and shelving system specially adapted to be used on-board ships and offshore. Developed in close cooperation with users from these
More informationCable Trays Technical Instructions & Specifications
Cable Trays Technical Instructions & Specifications Products Catalogue Objective and Structure The company s main objective is the supply of quality products, with respect to: practical design increased
More informationglass & Glazing Products
glass & Glazing Products WallMaker Create an unlimited variety of bright, beautiful and secure interior environments with the easy-to-install Stylmark WallMaker glass wall system. This versatile system
More informationThe Plastic Injection Moulders. Furniture Fittings & Tube Inserts
The Plastic Injection Moulders Furniture Fittings & Tube Inserts Contents Introduction Page 1 Square Inserts Page 2-3 Round Inserts Page 4-5 Rectangular Inserts Page 6-7 Domed and Shaped Inserts Page 8-9
More informationABLOY DC 240 DOOR CLOSER Heavy duty door closer
ABLOY DC 240 DOOR CLOSER Heavy duty door closer ABLOY DC240 heavy duty door closer offers a wide variety of functional options. ABLOY DC240 DOOR CLOSER The ABLOY DC240 have been developed to meet the exacting
More informationInstallation Detailed installation instructions are provided which should be strictly followed.
Specification System 6 The Metal Technology Thermally-Broken Vertical Slide Window has been designed in such a way that its'attractive and clean lines will enhance all types of residential and commercial
More informationMaterial Comparison Lower Quality Blender Optimum 9400. Electric Motor Assembly. Plastic Fans Low cost
Below is a factual comparison between our Optimum 9400 model and a lower quality high-speed blender dated May 20 th 2014. This comparison has been independently conducted, reviewing the key components
More informationENGLISH FORK GUIDE 2013
FORK GUIDE 2013 ENGLISH 1 With a brand which is synonymous with specialists in forest products handling attachments, BOLZONI AURAMO offers its expertise and market leading attachments for all requirements,
More informationModel # 940P-V6. Page 1 of 11
Model # 940P-V6 Page 1 of 11 Page 2 of 11 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic coated elements. Ultra Play guarantees all items for one full year to be free of defects in
More informationArchitectural Nylon. Architectural. Nylon
Architectural Nylon Architectural Nylon Contents Paris Series 273-279 Pull Handles and Accessories 281-292 269 Architectural Nylon HOPPE nylon levers and pull handles are manufactured to exacting standards
More informationPlaisance 50. Windows and doors. Sapa Building System
Plaisance 50 Windows and doors Sapa Building System Plaisance 50 is a non-thermally broken system for aluminium windows and doors with a building depth. The system offers a wide range of inward and outward
More informationC-Plus Softgrip Screwdrivers
10 C-Plus Softgrip Screwdrivers The multi-purpose screwdrivers with 2K handles From professionals for professionals. Perfect in every detail the C-PLUS series is the result of long-lasting studies into
More informationProduct Finishes Guide. More for your door than any other brand.
Product Finishes Guide More for your door than any other brand. Architectural Door Hardware Finishes From classic to contemporary, you ll find a complete range of door hardware finishes available at Hager,
More informationMechanical arms, belts and sheets
Car parks Mechanical arms, belts and sheets DETAIL ARM CAR PARK (mm) 5000 Platen 100x5mm Iron sheets 4mm 5000 485 2100 Belts type C 120x50x2 mm 4915 5400 Hot dipped galvanized UNE-EN ISO 1461 or black
More informationPreface nivtec.com 3
nivtec.com Preface nivtec.com 3 nivtec 4 nivtec.com Planning with an Eye for Details nivtec.com 5 prolight+sound 2012 6 nivtec.com Meeting Point Fair Booth nivtec.com 7 Our Preparations 8 nivtec.com Enable
More informationBritish Standard Underground Hydrant Range
British Standard Underground Hydrant Range 2 THE NEW AVK BRITISH STANDARD HYDRANT RANGE AVK are the renowned market leading innovators, manufacturers and suppliers of BS 750 fire hydrants into the UK,
More informationCERTIFICATE OF APPROVAL No CF 291 SCHOTT UK LIMITED
CERTIFICATE OF APPROVAL No CF 291 This is to certify that, in accordance with TS General Requirements for Certification of Fire Protection Products The undermentioned products of Drummond Road, Stafford.
More informationDecorative Lever Designs
Decorative Lever Designs 3 & C 4 & K 12 14 & D 15 & A 16 & B 17 50 51 52 53 54 55 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 2 www.stanleysecuritysolutions.com
More informationEPOCH DESIGN. retail LOCKING SECURITY MAILBOXES U.S. POSTMASTER APPROVED STOP MAIL IDENTITY THEFT. value. quality. secure
MAIL BOSS LOCKING SECURITY MAILBOXES U.S. POSTMASTER APPROVED EPOCH DESIGN retail STOP MAIL IDENTITY THEFT value quality secure patented profits EPOCH DESIGN, LLC Mail Boss by Epoch Design, LLC offers
More informationRADAR. 227 www.ncdirect.co.uk
RADAR solutions RADAR RADAR Key System 228 RADAR Lockset 229 RADAR Cover Plate 229 RADAR Padlock 230 RADAR Automatic Toilet Entry System 231 RADAR Ramp 231 RADAR Ramp Sign 231 227 www.ncdirect.co.uk RADAR
More informationCLEAR-DIVISIONS CENTERFOLD
CLEAR-DIVISIONS CENTERFOLD Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS CENTERFOLD moveable The yellow highlighted areas in
More informationABLOY DOOR AUTOMATICS Easy access for all types of swing doors
ABLOY DOOR AUTOMATICS Easy access for all types of swing doors Automatic door operators bring additional convenience in situations where the doors opening manually would be inconvenient or laborious. Recommended
More informationPivotLoc Ladder Systems
N25 ACCESS AND SAFETY EQUIPMENT SPECIFICATION CLAUSES PivotLoc Ladder Systems To be read with The Main Contract Preliminaries, General Conditions, Sub-Contract Preliminaries. MINIMUM CONTRACTOR STANDARD
More informationIs your concept unique?
wirerodsystems STRUCTURAL structural residential landscape coercial retail Sta-Lok Terminals Ltd are one of the world s leading manufacturers of stainless steel fittings for wire ropes, rods & fabricated
More informationCOMPACT DATA FAST AND SIMPLE DATA CABLE TRUNKING. www.rehau.co.uk. Building Solutions Automotive Industry
FAST AND SIMPLE DATA CABLE TRUNKING www.rehau.co.uk Building Solutions Automotive Industry UNOBTRUSIVE GOOD LOOKS FOR THE VERY LATEST DATA CATEGORY CABLING PART OF THE REHAU DATA CABLE MANAGEMENT RANGE
More informationSLIEVE - HORIZONTAL. Slieve featured in White RAL9016
05 SLIEVE - HORIZONTAL Slieve featured in White RAL9016 Slieve - Horizontal The Slieve radiator that is as much of an attractive feature for your room as it is a high output radiator. With a stylish look
More informationSEMMME2-20 - SQA Unit Code H2AB 04 Operating CNC Milling Machines
Overview This unit identifies the competences you need to operate Computer Numerical Control (CNC) three-axis or multi-axis machines, or CNC machining centres, in accordance with approved procedures. You
More informationUNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS
CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars
More informationStandard Door Specification
Element General Requirement To be defined in the project brief but should meet Building Regulations. All doors to be a minimum of 30 minute fire rated and must comply with all relevant UK legislation and
More informationNEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE
B4 NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE AVAILABLE IN CARBON AND STAINLESS STEEL 23 THEORY
More informationCITADEL. & AX-S Steel Covers. it s about time. www.cubisindustries.com
CITADEL & AX-S Steel Covers it s about time www.cubisindustries.com SECURITY WITH COMPROMISE OUT INTRODUCTION CUBIS manufactures bespoke steel access covers for the water industry and general construction.
More informationREHAU CABLE MANAGEMENT IT S IN THE FINISH. WWW.REHAUTRUNKING.CO.UK
REHAU CABLE MANAGEMENT IT S IN THE FINISH. WWW.REHAUTRUNKING.CO.UK This guide has been created to give you a quick reference to our range of quality trunking systems and their article numbers for easy
More information1990 Construct Furniture Co Ltd was established.
company profile it all started as a small one-man workshop business making small bathroom furniture Kindly allow us to introduce ourselves as a leading manufacturer of all types of furniture. The origins
More informationA World Class Manufacturer of Induction Bends
A World Class Manufacturer of Induction Bends COFELY FABRICOM BENDING A leading position in bending High Flexibility and Close Tolerances As a world leading manufacturer of pipe bends, produced by induction
More informationBrochure 2012-2013.EX
VERTIGA Brochure 2012-2013.EX VERTIGA The new benchmark for design at super-low water temperatures The ultimate expression of form and function. Vertiga combines the power of Jaga Top Performers, the efficiency
More informationStainless Steel and Mild Steel Enclosures. Stainless Steel and Mild Steel Enclosures
SX 8 The SX range comprises 14 sizes of enclosure manufactured in either stainless steel or mild steel. 11 sizes are available in depths of 140 or 200mm and 8 sizes are available in depths of 140, 200
More informationPIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta
PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification Number: 3503-11.2.610 Rev. 2 Rubber Lined Steel Pipe and Fittings Mechanically Coupled Plain End Type System Issued Revised Approved
More informationIntroducing a breakthrough in barrier security - Trellidor Clear Guard. It s the virtually invisible security option you ve been waiting for.
Introducing a breakthrough in barrier security - Trellidor Clear Guard. It s the virtually invisible security option you ve been waiting for. Now you can enjoy the view without feeling vulnerable. For
More informationChapter 6 Machining Center Carbide Insert Fundamentals
This sample chapter is for review purposes only. Copyright The Goodheart-Willcox Co., Inc. All rights reserved. N10G20G99G40 N20G96S800M3 N30G50S4000 N40T0100M8 N50G00X3.35Z1.25T0101 N60G01X3.25F.002 N70G04X0.5
More informationLiftAlloy Chain Slings
CHAIN SLING BASICS Slings Lift-All chain slings meet or exceed all OSHA, ASME B30.9 and NACM standards and regulations. chain slings, available in 80 for 7/32" and 7/8"- /4" and 00 for 9/32"-3/4", are
More information* Provided that the overall length is within the minimum length parameter of the Gen II blank that is machined.
PLEASE SEE GEN II CUSTOM VALVE SPECIFICATIONS PAGES 42 & 43 CUSTOMER NAME CUSTOMER SIGNATURE DATE By signing this form I accept the goods are nonreturnable for credit and that Manley takes no responsibility
More informationSliding and Folding Door Fittings Sliding Door Accessories
Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness:
More informationPaLLe t trucks Lifting carts t r g in t if L 2435 6815 6836 6856 6842
l i f t i n g c a r t s Lifting carts The prograe for lifting, transporting and storage From the classical forklift trolley to the machine lifter, from furniture dollies to a chassis with 24 tons load
More informationCDW Systems Ltd Contemporary Doors & Windows
CDW Systems Ltd Contemporary Doors & Windows The comprehensive product overview A complete specification guide to CDW Systems range of Aluminium windows, doors and curtain walling for commercial and residential
More informationRef: GA13UK Glass Awning Support System
Ref: GA13UK Glass Awning Support System Give any entrance an uncomplicated, graceful look, enhancing the design of any building. Installation LAMINATED TOUGHENED GLASS High grade 316 stainless steel for
More informationTechnical Information
Technical Information This section of the catalogue provides technical information that will help specify, install and maintain Surelock McGill devices and components. The topics are listed below: Blast
More informationEXIT HARDWARE. Uniclass L418184. CI/SfB (31.59) Xt7 VERSION: AUGUST-11. An ASSA ABLOY Group brand
EXIT HARDWARE The safe choice in eiting. High performance, high traffic devices that provide egress efficiency, freedom of movement and robust security. Uniclass L418184 VERSION: AUGUST-11 CI/SfB (31.59)
More informationNATIONAL INSTITUTE OF BIOLOGICALS
Short Term Notice Inviting Quotations Quotations No. S.1-36/07/NIB/Engg. (Civil) Invitation to short term quotations for Repairing of damaged gypsum board false ceiling and painting with epoxy paint in
More informationCLEAR-DIVISIONS VARIOFOLD
CLEAR-DIVISIONS VARIOFOLD Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS VARIOFOLD moveable The yellow highlighted areas in the
More informationSEMAE3221 Machining aircraft components using CNC milling machines
Machining aircraft components using CNC milling machines Overview This standard identifies the competences you need to operate Computer Numerical Control (CNC) three axis or five axis machines or CNC machining
More informationHow To Design A 3D Print In Metal
DMLS / SLM Metal 3D Printing. An introductory design guide for our 3d printing in metal service. v2.2-8th July 2015 Pricing considerations. Part Volume. One of the biggest factors in the price for DMLS
More informationRoofboxes ENITH. Zenith, Room for Prestige.
Roofboxes ENITH Zenith, Room for Prestige. 3 Sheer elegance. Zenith. a valuable investment in travel comfort. The Hapro Zenith is in a league of its own. Full attention has been given to its beautiful
More informationTable of Contents. IV. Interior Doors. 1. Product Training 2. Bilco Quote/Order Checklist
Table of Contents IV. Interior Doors 1. Product Training 2. Bilco Quote/Order Checklist Interior Doors (non-drainage units) 1. Bilco T, TD, K, and KD Type doors A. T - single leaf aluminum construction
More informationPRODUCTS. Ten 47 Ltd 2B Frances Industrial Park Kirkcaldy Fife. UK KY1 2XZ
+ Ten 47 CABLEGUARD PRODUCTS Ten 47 Ltd 2B Frances Industrial Park Kirkcaldy Fife UK KY1 2XZ Tel: +44 (0) 1592 655725 Fax: +44 (0) 1592 651049 Email: sales@cableguardeu Web: wwwcableguardeu Index Black
More informationK17.12 Door closers K17. Doors 01.09.2013
K17 Doors K17.12 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com Contents 1. OPTIC door closer TS40(V) with scissor
More informationSOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design Ideal installation for; Offices Branch Offices Schools Computer Aided Classes Government Offices Hotels
More informationwww.steelformcatering.com
www.steelformcatering.com catering cat e r i n g We are specialized in the production and sub furniture of components for mechanical industry, sector for which we even furnish advice and collaborate in
More informationmulti-axis system ROBOTRAX cable 3D cable carrier system carrier
3D cable multi-ais 3D cable carrier system carrier system Key Features: Perfect for 3D multi-ais movement applications. Maintains a pre-determined minimum bend radius Open-style design allows for easy
More informationNEWSTAR BROCHURE. December 2007
NEWSTAR BROCHURE December 2007 Surface Overhead Door Closers Door Closing 5003 Silver Slide Cover SE Door Widths from 850mm to 1100mm. Door Weights 40kg to 80kg. Suitable for use in temperatures from -15
More information1.2.1 1.1.8 PRODUCTBLADEN GT ROCKPANEL STRUCTURE
1..1 1.1.8 PRODUCTBLADEN SHEETS GT page 1 to 6 Rockpanel Structure is a very durable panel with a lightly textured finish, specially developed for use in cladding, fascia, soffit applications. The basic
More informationConfort 26. Sliding Systems. Sapa Building System
Confort 26 Sliding Systems Sapa Building System Confort 26 is Sapa s thermally insulated sliding system for windows and doors. Available as two- and three-rail solution. Among its features, there are
More informationWE ARE UNION. replace with new shot. Mortice Lock Range. ASSA ABLOY, the global leader in door opening solutions
WE ARE UNION replace with new shot Mortice Lock Range ASSA ABLOY, the global leader in door opening solutions Contents Introduction 2 Professional range 4-15 StrongBOLT TM Lever Locks 4-5 StrongBOLT TM
More informationCI/SfB (74.4) n6 Date July 2008. Supersedes all previous issues 5.01. Seats
CI/SfB (74.4) n6 Date July 2008 s Supersedes all previous issues 5.01 Range Page 2 Cube A quality solid- compression moulded soft close seat. Fitted with buffers and metal hinges. Suitable for the Cube
More informationTHE IDEAL SOLUTION SHELVING. Sales Telephone: 01553 765205 Sales Fax: 01553 768464 Email: sales@eais-foodservice.co.uk
THE IDEAL SOLUTION Sales Telephone: 01553 765205 Sales Fax: 01553 768464 Email: sales@eais-foodservice.co.uk EZ STORE Bright Chrome Wire System g Bright Chrome wire shelves Heights 3 tier = 1650mm standard
More informationKIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
More informationInsulated Roof & Wall Panels. Product Data Sheet. Trapezoidal Insulated Roof Panels KS1000 RW
Insulated Roof & Wall Panels Trapezoidal Insulated Roof Panels KS1000 RW Overview Kingspan roof panel systems present a superior system compared to conventional multi-part site assembled systems. They
More informationSide Hinged Doors GSW 40-L
Side Hinged Doors GSW 40-L GARAGE DOORS AND SIDE DOORS IN A WIDE RANGE OF DESIGNS NUMEROUS FINISHES, SURF ACES, COLOURS AND GLAZING ELEMENTS Extremely robust and highly insulating Superior quality Teckentrup
More informationRAUFOSS EXPLOSIVE COMPRESSION FITTINGS
INSTRUCTION MANUAL FOR RAUFOSS EXPLOSIVE COMPRESSION FITTINGS Box 7 2831 Raufoss Norway Tlf.: +47 61 15 17 87 Fax: +47 61 15 25 56 25 January 2013, rev 2 Available on www.vpmetall.no Page 1 CONTENTS GENERAL
More informationTASTECH SERVICES LTD. Manufacturer and Supplier of Equipment and Daily Living Aides to Hospitals, Resthomes, OT s and the General Public
TASTECH SERVICES LTD Manufacturer and Supplier of Equipment and Daily Living Aides to Hospitals, Resthomes, OT s and the General Public Issue One Phone (03) 343 2122 e.mail: info@tastechservices.co.nz
More informationQuality alu LED profiles
Quality alu LED LED PROFILES - PRODCUT CATALOGUE 2010 Quality Aluminum LED Manufacturer & Designer NEW RECESSED SLIM LINE 15mm Introduction: It is recessed type of the aluminum LED profile to build into
More informationBoston, Venice, Kodiak. Enviro Wood Fireplace Inserts
Boston, Venice, Kodiak Enviro Wood Fireplace Inserts Why buy an Enviro Wood Insert? Up to 84.7% Efficiency - EPA approved and up to 84.7% efficiency - Enviro makes highly efficient wood inserts to help
More informationLEADER IN CUTTING TECHNOLOGY
LEADER IN CUTTING TECHNOLOGY FOR OVER 2 YEARS REASONS WHY TRONEX IS THE BEST IN THE WORLD 1 2 SUPERIOR CUTTING PERFORMANCE Cut hundreds of thousands of times before dulling. Cut hundreds of thousands of
More informationFall Protection Solutions
P R O V I D I N G S A F E T Y S O L U T I O N S W O R L D W I D E Fall Protection Solutions COLLECTIVE PROTECTION KEEGUARD FREE STANDING GUARD RAIL APPROVED BY CERAM AND APAVE KEE DOME SKYLIGHT FALL PROTECTION
More informationHow to build a Pizza Oven in 4 days
How to build a Pizza Oven in 4 days Preparation day (slab) 1. Foundation 1500 deep x 1300 wide x 75mm deep Required 20 bags cement pre mix. If you already have a concrete base, you save this prep day DAY
More informationA comprehensive range
The professionals in coated pipelines A comprehensive range We have reduced our machine set-up times to offer a fast turnaround for fusion bonded epoxy, multi-layer and internal pipe coatings. All coating
More informationPlaisance 24. Sliding Systems. Sapa Building System
Plaisance 24 Sliding Systems Sapa Building System Plaisance 24 is Sapa s noninsulated sliding system for windows and doors. Available as one-, two-, three- and fourrail solution. Among its features, there
More informationComposite Panel Firewall Systems
Composite Panel Firewall Systems part of the Protecting more than your business Insulated mineral fibre panels have excellent thermal and acoustic properties, ideal for factory and office partition walls.
More informationHürriyet Mah. Dr. Cemil Bengü Cad. No.27/A 34403 Çağlayan / Istanbul
Hürriyet Mah. Dr. Cemil Bengü Cad. No.27/A 34403 Çağlayan / Istanbul Tel: +9 0212 224 2392 +9 0212 225 2182 Faks:+9 0212 225 0274 Website: www.alaks.com.tr E-Mail: info@alaks.com.tr 1160F Aluminum Corner
More informationBAGGAGE HANDLING SYSTEMS. Trastecnica S.p.A. Handling Baggage Systems Edition 2002 - Rev. 00-1 -
BAGGAGE HANDLING SYSTEMS Trastecnica S.p.A. Handling Baggage Systems Edition 2002 - Rev. 00-1 - TECHNICAL SPECIFICS INDEX Check-in with one conveyor 4 Scales 6 Belt Conveyors 8 Take away 9 Feeder and Belt
More informationCode of Practice for fire resisting metal doorsets
COP 1005 Code of Practice for fire resisting metal doorsets Scope The aim of this document is to provide guidance on the best practice for, and a better understanding of, hinged or pivoted fire resisting
More information