IPTV Headend. IP streaming

Transcription

1 IPTV Headend IP streaming The IPTV technology allows you to distribute satellite TV, terrestrial TV and A/V signals through buildings over a local area network (LAN). Through an easy to use software interface you can configure and manage input and output channels, on-site or remotely.

2 IPTV Headend The IPTV headend range of products enables the streaming of DVB-S2, DVB-T(2) and A/V signals over an (existing) IP network. This eliminates the need for a coaxial network in new buildings and allows the combination of data and IPTV on the same cable. Besides a reduced installation cost, this solution opens new possibilitiesfor interactive TV. The choice of channels can be fully customized for every installation upon customer needs, which makes it a very flexible and scalable solution. All IPTV modules have two separate ethernet ports: one for streaming output and one for configuration. This allows the user to separate the streaming traffic from the configuration, to avoid unauthorized access. Our CAM CI slot is compatible with several professional CAM s like Aston, Smit and Neotion. According yo your operator, you need a smartcard and subscription for pay TV channels.

3 Advantages Modular solution combining DVB-S2, DVB-T(2) and A/V-signals. Distributing TV, Radio and A/V channels. Combination of free-to-air and pay-tv channels. Digital solution which provides more channels, services and content. Superior image and sound quality. Up to 144 programs per rack. Up to 16 SD or HD programs per module. Easy channel export for middleware. Each module has 4 tuners which can independently demodulate 4 satellite transponders or 4 terrestrial multiplexes. Custom channel package per installation. Technology and application of the future. Remote configuration possibilities. Easy configuration with UUI configuration software. Accessories: Ref. 700E: Power supply 10 A Ref. 710E: 19 rack (5U) Ref. 720E: Fan unit (2U)

4 The IPTV Headend Range DVB-S2 to IP modules DVB-T(2) to IP modules AV to IP modules QPSK to IP COFDM to IP AV to IP Distribute up to 16 SD or HD channels per module. 4 Sat inputs with 4 active looptrough outputs. Reception of 4 satellite bands per module. 4 independent tuners. Decode up to 12 programs per module with multi-service CAM (Decoded programs from all 4 tuners can be routed through 1 CAM). Easy configuration with UUI configuration software. Distribute up to 16 SD or HD channels per module. 1 terrestrial input with active loop-trough output. Reception of 4 multiplexes per module. 4 independent tuners. Decode up to 12 programs per module with multi-service CAM (Decoded programs from all 4 tuners can be routed through 1 CAM). Easy configuration with UUI configuration software. 4 composite AV inputs with stereo audio per module. Ideal solution for CCTV or near-vod! Easy configuration with UUI configuration software. 602E IPTV - DVB-S inputs, 4 transponders, up to 16 channels 604E IPTV - DVB-T-16 1 input, 4 tuners, up to 16 channels 630E IPTV - A/V-4 4 composite inputs, 4 outputs 603E DTV - DVB-S2-CI E IPTV - DVB-T-CI UI - software configurator 4 inputs, 4 transponders, 1 input, 4 tuners, up to 16 channels Desktop Access + Configurator up to 16 channels Hardware + System Configurator Software License 606E IPTV - DVB-T input, 4 tuners, up to 16 channels 607E IPTV - DVB-T2-CI-16 1 input, 4 tuners, up to 16 channels

5 Specifications IPTV Range Middleware Server Satellite Antenna Switch Headend VOD Server AV HLS Server DVD / Blu-ray N-PVR Server Number of inputs - Input: QPSK (DVB-S2) Input: COFDM (DVB-T) Input: COFDM (DVB-T2) 4 with 4 active loop-through outputs (0 db loss) 1 with 1 active loop-through output (± 1 db) Tuner - 4 tuners (4 transponders) 4 tuners (4 multiplexes) Frequency range MHz VHF: UHF: level dbm -55 to to -20 Bandwidth MHz 36 6/7/8 1,7/5/6/7/8 Modulation - LNA power DVB-S2: QPSK, 8-PSK DVB-S: QPSK LNB power (DC+tone) V 13/ kHz LNB current per input ma max E 603 E 604 E 605 E 606 E 607 E QPSK: 1/2, 2/3, 3/4, 5/6, 7/8 16-QAM: 1/2, 2/3, 3/4, 5/6, 7/8 64-QAM: 1/2, 2/3, 3/4, 5/6, 7/8 5/12/24 (100 ma max) QPSK: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6 16-QAM: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6 64-QAM: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6 256-QAM: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6 Output: IPTV Output: IPTV Standard - IEEE /100 Base-T IEEE /100 Base-T Protocol - Multicast IP/UDP Multicast IP/UDP CI-slot - no yes no yes no yes Bitrate Mbps Capacity - up to 16 simultaneous streams up to 16 simultaneous streams Connectors - General General RF: 8 x "F" connector female Streaming: 1 x RJ-45 (Ethernet) Management: 1 x RJ-45 (Ethernet) DC: banana sockets RF: 2 x F connector female Streaming: 1 x RJ-45 (Ethernet) Management: 1 x RJ-45 (Ethernet) DC: banana sockets Power supply VDC Consumption A 0,6 0,8 0,5 0,7 0,5 0,7 Operating temperature C 0 to to +40 Dimensions - 5 RU x 8 TE x 195 mm 5 RU x 8 TE x 195 mm

6 Specifications IPTV Range 630 E Input: CVBS (A/V) Number of inputs - 4 x AV (CVBS) Video processing - Video resolution - Conformance with IEC (MPEG2 video) and ISO/IEC (MPEG1 audio) standards SIF: 352 x 288 SVCD: 480 x 576 HALF D1: 352 x 576 D1: 720 x : 544 x 576 Video bitrate kbps 1500 to 7000 (Typ. 6000) Audio volume db -6 to +6 (Typ. 0) Connectors - General Video input (4 x CINCH) Audio input: 4 x 3,5 mm jack Streaming: 1 x RJ-45 (Ethernet) Management: 1 x RJ-45 (Ethernet) DC: banana sockets Power supply VDC 15 Consumption A 0,65 Operating temperature C 0 to +40 Dimensions - 5 RU x 8 TE x 195 mm Output: IPTV Standard - IEEE /100 Base-T Protocol - Multicast IP/UDP Bitrate Mbps 100 Capacity - 4 streams Power Supply Accessories 700 E 710 E 661 E 720 E Input Inlet 90 to 264 VAC Output Banana socket +15 VDC 10A Dimensions 5 RU x 12TE x 180 mm Sub-rack Blank plate Fan unit Dimensions 19 x 5RU x 195 mm 5RU x 8TE 19 x 2RU x 155 mm

7 Nice graphical user interface. Drag and drop function. Extended system overview. Online synchronization keeps you always up to date. Location awareness helps you managing different installations. Import export settings. Middleware channel export. Extended monitoring.

8 Because the configurator software focusses on ease of use, the interface was one of the key elements throughout the design. We believe this is an essential part of the platform, making it very intuitive to use. We have taken the graphics to a higher level, and this makes the software very enjoyable to use. Another key aspect for the user is speed. We recognize this can make or break an application. A slow application can never be a good one, even if the functionality is great. Thanks to the very efficient design of the configuration software, speed is no longer an issue. Ant Systems Accent Business Park Kwadestraat 153 bus Roeselare Belgium T +32 (0) F +32 (0) E info@antsystems.be W