INSTALLATION MANUAL. ST-LCDHD-18.5 Intelligent Mini Dome PTZ Color Camera. Copyright North American Cable Equipment, Inc.

Transcription

1 INSTALLATION MANUAL ST-LCDHD-18.5 Intelligent Mini Dome PTZ Color Camera Copyright North American Cable Equipment, Inc.

2 1 PREFACE Thank you for purchasing this LED monitor! This manual will help you use all the extensive features of your new monitor. Make sure the monitor was not damaged in transit. Should the monitor be damaged, do not install it and contact your dealer. Check that you have all the accessories according to the manual. 2 SAFETY PRECAUTIONS Put the monitor on a stable surface. Do not use the monitor with others fixtures than those provided or suggested by the manufacturer. Do not place anything on top of the monitor. If you have a wall mount, check that it is steady. Do not block or cover the ventilation openings on the monitor Power source The monitor must be plugged to an V outlet. Connection cables Power cord and cables must be properly routed and protected to prevent people from stepping on them and/or causing the monitor to fall. Heating sources and humidity Keep the monitor dry and away from sources of humidity. Keep the monitor away from heat sources. Cleaning Unplug the monitor before cleaning it. Do not use solvents or liquids to clean the monitor. Only clean the monitor with a soft and dry cloth. Caution Unplug the monitor during electrical storms. 1

3 3 FRONT & BACK VIEW, REAR CONNECTIONS Front View 1. TV/AV select 2. Menu key 3. Channel up/down 4. Volume up/down 5. Standby 6. Remote control sensor Back View (The backview is only for your reference) Rear Connection HDMI: HDMI input PC: VGA PC video input VIDEO1/2:BNC composite video input VIDEO OUT:BNC composite video output AUDIO: Composite audio input(audio:pc/video1/2) EARPHONE: Headphone audio output 2

4 4 CONFIGURATION 4.1 PC SETTINGS Press <MENU> key. a) Press and enter PC SETTINGS menu. Press or key and select CONTRAST, BRIGHTNESS, COLOR TEMP, SCALE, PICTURE OVERSCAN. b) Press or key to access and adjust CONTRAST, BRIGHTNESS, COLOR TEMP, SCALE, PICTURE OVERSCAN. 4.2 AUDIO SETTING Press < MENU >, then press key a) Press, then enter AUDIO SETTINGS menu. Press or key to select BASS, TREBLE, BALANCE, SOUND MODE, EQUALIZER, AVC, SOUND EFFECT. b) Press or key to access and adjust BASS, TREBLE, BALANCE, SOUND MODE, EQUALIZER, AVC, SOUND EFFECT. 3

5 4.3 OSD SETTING Press <MENU> key, then press key a) Press, then enter OSD SETTINGS menu. Press or key to select SLEEP TIMER, LANGUAGE, H-POSITION, V-POSITION, DURATION, HALFTONE, BLUE SCREEN, IMAGE REVERSE, RESTORE. b) Press or key to access and adjust SLEEP TIMER, LANGUAGE, H-POSITION, V-POSITION, DURATION, HALFTONE, BLUE SCREEN, IMAGE REVERSE, RESTORE. 4.4 GEOMETRY SETTING Press <MENU> key, then press key a) Press, then enter GEOMETRY Setting Menu. Press or key to select H-POSITION, V-POSITION, CLOCK, PHASE, AUTO ADJUST. b) Press or key to access and adjust H-POSITION, V-POSITION, CLOCK, PHASE, AUTO ADJUST. 4

6 5 REMOTE CONTROL INSTRUCTIONS Remote control instructions 1.STANDBY: Press to turn on/standby the TV set 2. : Temperature monitoring chip 3. MUTE: Mutes the audio 4. PICTURE: Set picture mode. 5. FREEZE: Freezes picture. 6. INPUT: Press to display the input source menu. 7., MENU: Control the cursor in the menu 8. MENU: Displays the OSD menu. 9. VGA: Switches to VGA mode 10. YPBPR: no function 11. HDMI: Press it to turn to HDMI mode 12. AV: Switches to BNC VIDEO MODE 13. S-VIDEO: no function 14. DVI: no function 5

7 6 REMOTE CONTROLS SETUP a: Open the cover b: Insert batteries. When inserting the batteries, make sure batteries are facing the right direction as per + and - marks on the batteries and within the battery compartment c: Replace the battery cover 6.1 BATTERY USAGE CAUTION: To prevent battery leakage which may result in bodily injury or damage to the remote, please do as follows: 1. Install all batteries correctly, and as marked on the remote control. 2. Do not mix batteries :(OLD and NEW or CARBON and ALKALINE, etc.). 3. Remove batteries when the remote is not used for a long time 7 ACCESSORIES 1. One Remote Control 2.Two Batteries 1.5V 3. One User Manual 8 TROUBLESHOOTING Issue Troubleshooting No signal Please check that all cables and are correctly plugged in. No color shades Adjust the contrast, the color and the brightness Double or multiple display image Snow/static on the screen The remote control does not work No sound May be the result of an electrical wave disturb from other TV, Computer and Game machine or Radio Please check that all cables are correctly plugged in all the way. Please check the batteries order and alignment. Check that the IR of the remote control is not hidden or covered. Make sure that the Mute button has not been pressed on monitor or controller. Make sure all cables are correctly plugged in. 6

8 9 SPECIFICATIONS Screen Size 18.5 Display Type TFT LED Aspect Ratio 16:9 Power Source V 25W TV System Video Input Format Antenna Input PAL / SECAM PAL / NTSC/SECAM Standard antenna socket 75 Ω Audio Output L / R 3W*2 VGA Input Format AV Standard VESA mode Video:1.0Vp-p, 75Ω; Audio20kΩ; RCA Input PC HDMI Standard VESA mode MAX 1080P/60Hz VIDEO Output Net Weight Net Dimensions with stand Net Dimensions without stand CVBS: 1.0 Vp- p 75 Ω; RCA 3±1kg wide, 13 tall, 6 deep wide, 11.8 tall, 1.8 deep 7