IVM 4500 IEM Set In-Ear Monitoring System

Transcription

1 Audio quality without any compromise Reference audio with ultra linear frequency response Diversity Receiver with two matched antennas ensures reliable transmission Stable signal due to a new reference radio electronic design with narrow filter Quick frequency change function to support monitor engineers Manual radio signal attenuator for a robust radio quality and more RF dynamic IVM 4500 IEM Set In-Ear Monitoring System AKG IVM 4500 IEM in-ear monitoring provides higher level audio quality without compromising reference capability and caters to all needs of engineers with leading edge reference audio technology. IVM 4500 IEM offers a highly diversified system, which includes high-end radio electronic and a manual radio signal attenuator for more RF dynamic. Antenna diversity, with two matched antennas and a new reference radio electronic design contribute to the stable signals of the receiver. The enhanced frequency setup shows the number of free channels, and new preset groups support TV channels. A quick frequency change function supports monitor engineers throughout performances to make their projects easily adjustable. With 30 MHz tuning range you can select 1200 frequencies and operate with up to 14 channels simultaneously within the same frequency band. Receivers are powered by two AA size Alkaline (LR6), Lithium (FR6), AKG BP 4000 µc controlled battery pack or Ni-MH rechargeable (HR6) battery and provide up to 10 hours of continuous operation. Included in the IVM 4500 IEM system are the SPR 4500 IEM diversity receiver, the SST 4500 IEM transmitter and the IP 2 ear-channel headphones. The SPC 4500 antenna combiner, the SRA 2 W directional antenna and the RA 4000 W omnidirectional antenna complete the system.

2 Stereo Transmitter with patented digital MPX generation Adjustable radio output power of 10, 20, 50 and 100 mw (country dependent) Ultra linear frequency response Premium SNR Reference audio dynamic dbx professional digital signal processing Low cut, compressor, equalizer and unique binaural room simulations for a natural listening experience Rugged half 19 metal housing diversity receiver Up to 14 pre-programmed frequencies per group PC control optional HUB 4000 Q SST 4500 IEM SST 4500 IEM Stereo Transmitter Specifications Carrier frequency range Band 1: to MHz Band 5-TH: to MHz Band 3-A: 720 to MHz Band 5-IL: to MHz Band 3-K: to MHz Band 7: to MHz Band 4: to MHz Band 8: to MHz Band 5-A: to MHz Band 9: to & to MHz Band 5-JA: to MHz Band 9-U: to MHz Switching bandwidth 30.5 MHz (country dependent) Output Power 10, 20, 50 and 100mW selectable (country dependent) Modulation FM, MPX Stereo Audio bandwidth Hz (± 3 db) T.H.D. 0.5 % Audio Inputs 2 x combined XLR balanced / TS ¼ jack sockets unbalanced Audio Outputs 2 x Loop TS ¼ jack sockets unbalanced 1 x Line TS ¼ jack sockets balanced Headphones Output 1 x TS ¼ jack sockets balanced Dimensions ½ 19 inch 1U rack, 200 mm (7.8 in.) 44 mm (1.7 in.) 216 mm (8.5 in.) Net Weight 1070 g (2.36 lbs.) Standard Accessories 1 UHF antennas, power supply, rack mount kit SST H00.. The stereo stationary transmitter shall operate over a 30 MHz UHF frequency range in one of 7 bands from 500 MHz to 823 MHz. The transmitter shall offer up to 1200 discrete operating frequencies within that band. The transmitter shall provide a rugged half-rack metal case with backlit LC color display. An integrated signal processor shall provide an adjustable low cut filter, equalizer-, binaural room simulation-, and compressor presets. The transmitter shall provide indicators for audio input level, gain reduction of compressor/limiter, activated audio-processing blocks, actual transmitting power, device name, frequency group und channel. Rear panel BNC socket shall allow either the supplied antenna or a complex antenna network to be connected to the transmitter. The transmitter radio output power shall be software adjustable up to 100mW. The squelch threshold shall be adjustable between 82 and 100 dbm. The transmitter s audio bandwidth shall be 35 Hz to 20 khz; S/N 90 db(a); THD <0.8% at 1 khz and stereo, mono and dual function shall provided as well as a SR4500 function for a stationary transmission to a SR4500 receiver. Audio inputs shall comprise a XLR/jack hybrid connector with ±20 db adjustable input gain. The transmitter shall provide two 1/4" TS jack audio loop outputs for flexible mix setups, a 1/4" TS stereo jack output for line signal and a 1/4" TS stereo jack output for headphones. A RJ11 data port for connecting HUB 4000 Q communicating with Harman System Architect PC software shall be provided. The transmitter shall provide a lockable DC input for the supplied 12 V DC power supply. The transmitter shall measure 200 x 216 x 44 mm (W x D x H) and weigh 1070 g. The transmitter shall be the AKG SST 4500 or equivalent.

3 Diversity bodypack receiver with rugged metal housing Reference audio quality with ultra linear frequency response High-end and powerful headphone amplifier Two matched antennas and a new reference radio electronic design ensure reliable transmission Enhanced automatic setup shows number of free channels Preset groups support TV channels Manual radio signal attenuator Quick change of individual programmed frequencies for monitor engineers Stereo, Mono and Dual mode for individual mix Operates for up to ten hours off two AA size dry lithium batteries, six hours off two AA size dry alkaline batteries and 7 hours off optional BP 4000 battery pack with µc controlled battery management SPR 4500 IEM SPR 4500 IEM Transmitter Specifications Carrier frequency range Band 1: to MHz Band 5-TH: to MHz Band 3-A: 720 to MHz Band 5-IL: to MHz Band 3-K: to MHz Band 7: to MHz Band 4: to MHz Band 8: to MHz Band 5-A: to MHz Band 9: to & to MHz Band 5-JA: to MHz Band 9-U: to MHz Switching bandwidth 30.5 MHz (country dependent) Output Power 10, 20, 50 and 100mW selectable (country dependent) Modulation FM, MPX Stereo Channel separation > 40 db(a) Audio bandwidth Hz (± 3 db) T.H.D. 0.8 % SNR (A-weighted) typ. >90 db(a) Audio Output 3.5mm jack socket, 150 mw (rms)/16 Ohm Battery life 6 bis 10 Stunden volume dependent, 2 Batteries AA or BP 4000 Dimensions 70 x 91 x 25 mm (2.8 x 3.5 x 1 in.) Net Weight 165 g (0.36 lbs.) Patents Remaining battery life (Patent no. AT , GB , US 6,344,730) SPR H00xx0 The diversity bodypack receiver shall operate over a 30 MHz UHF frequency range in one of 7 bands from 500 MHz to 823 MHz. The receiver shall offer up to 1,200 discrete operating frequencies within that band. The receiver shall operate on a diversity principle and shall be housed in a rugged metal case. The receiver shall provide intermodulation-free frequencies from an integrated frequency database and an automatic function for finding an available frequency. Total harmonic distortion at 1 khz for rated deviation shall be no greater than 0.8% and stereo, mono and dual function for individual mix shall provided. The receiver shall provide a manual squelch adjustment and a manual radio signal attenuator for optimum system operation. Headphone output shall be a 3.5 mm stereo jack connector. The bodyback receiver shall be controlled by a jog and shall provide a backlit display with automatic power saving as well as a programmable LED (red/green) showing the overall system status. The display shall indicate the transmitter battery capacity, as well as the radio signal input level, frequency, frequency group and channel. The audio bandwidth of the receiver shall be 35 Hz to 15 khz; S/N 90 db(a); THD at 1 khz <0.8%. The receiver shall operate with a companding system that is complemented by the transmitter. The diversity receiver shall provide a quick change of individual programmed frequencies to support monitor engineers. Charging contacts on the bottom panel shall allow the easy charging of a battery pack inside the transmitter. The receiver shall operate off two AA size LR6 dry batteries, two AA size NiMH rechargeable batteries or a µc controlled battery pack or two AA size FR6 lithium batteries. The receiver shall measure 70 x 91 x 25 mm and weigh 165 g. The diversity bodypack receiver shall be the AKG SPR 4500 IEM or equivalent.

4 Stationary 4:1 combiner Powers transmitters via antenna lines Rugged half 19 all metal case Combines antenna signals of up to four SST 4500 IEM stereo transmitters SPC 4500 SPC 4500 Combiner Specifications Carrier frequency range 500 to 865 MHz Max. Input Power System Gain Audio bandwidth T.H.D. Radio Signal Inputs Radio Signal Output Dimensions Net Weight Standard Accessories 3 to 4 x 20mW inputs or 2 x 50mW inputs 0 db Hz (± 3 db) 0.5 % 4 x BNC socket, 50 Ohm 1 x BNC socket, 50 Ohm ½ 19 inch 1U rack, 200 mm (7.8 in.) 44 mm (1.7 in.) 216 mm (8.5 in.) 1193 g (2.6 lbs.) Power supply, rack mount kit SPC H00010 The 4:1 antenna combiner shall comprise a stackable, active wideband antenna booster and antenna distribution system within a half-rack metal case and include a rack mounting kit. The antenna combiner shall operate in a carrier frequency range of 500 to 865 MHz. The antenna combiner shall provide the following inputs, outputs, controls, and indicators: 4 x 50 ohm BNC antenna input sockets, 1 x 50 ohm BNC antenna output socket. Green, orange and red status LED shall indicate correct or incorrect function of the combiner. The transmitters connected to the antenna combiner shall be powered via the appropriate antenna cable. Unused antenna outputs shall be automatically terminated with a 50 ohm terminal. A power supply for up to 4 SST 4500 IEM transmitter shall be available as an optional accessory. The antenna combiner shall operate from 12 VDC and provide a lockable DC input for the supplied 12 V DC power supply. The combiner shall measure 200 x 216 x 44 mm (7.8 x 8.5 x 1.7 in.), and weigh 1193 g (2.6 lbs.). The antenna combiner shall be the AKG SPC 4500 or equivalent.

5 IVM 4500 Components SST 4500 IVM 4500 Set SST 4500 Stationary Transmitter SPR 4500 Bodypack Receiver IP 2 Ear Channel Headphones 19 Rack Mount Kit 2x AA size LR6 Battery 12V EU/US/UK Power Supply ¼-Wave Antenna 3097H00xx0 SST 4500 Stationary Transmitter 19 Rack Mount Kit 12V EU/US/UK Power Supply ¼-Wave Antenna 3095H00xx0 Antenna SPR 4500 Set SPC 4500 SPR 4500 Bodypack Receiver IP 2 Ear Channel Headphones 2x AA size LR6 Battery SPC 4500 Stationary 1:4 Combiner 19 Rack Mount Kit 12V EU/US/UK Power Supply 3096H00xx0 3098H00010 Power Supply SRA 2 W RA 4000 W AC12 EU/US/UK 2000mA Passive Directional Antenna 50 Ohm 4-6 db Gain Passive Omni-Directional Antenna 50 Ohm 1-2 db Gain For use with short cable runs RG58: <10 m/30 ft RG213 or low loss cable: <20 m/60 ft For use with short cable runs RG58: <5 m/30 ft RG213 or low loss cable: <10 m/30 ft One high current 12V/2A DC output feed sthe power to SPC 4500 antenna splitter. (Attention: SPC 4500 needs 2x 12V/2A!) Via SPC 4500 four SST 4500 transmitter sget the power through the antenna cable. Three high current 12V/2A DC outputs feed the power to SPC 4500 antenna splitter. (Attention: SPC 4500 needs 2x 12V/2A!) Via SPC 4500 four SST 4500 transmitters get the power through the antenna cable. 3009H H H H000x0 Wall Plug 12V/2A Power Supply EU connector US connector UK connector PSU 4000 PSU 4000 Stationary Power Supply 19 Rack Mount Kit IEC Power Cable (optional) 3x lockable DC cable SRA 2 W The antenna shall be a passive directional antenna operating in the UHF range. The antenna gain of 4 db shall allow for the use of RG 58 cables up to 10 m long or RG 213 cables up to 20 m long. The antenna shall feature an integrated, swivelling 3/8" stand adapter thread, and 50-ohm BNC connectors. The carrier frequency range of the antenna shall be 500 MHz to 865 MHz, its antenna gain 4 db. The passive directional antenna shall be the SRA 2 W from AKG. RA 4000 W The antenna shall be an passive omni-directional antenna operating in the UHF range. The antenna shall feature an 50-ohm BNC connectors, and include an SA 63 stand adapter. The carrier frequency range of the antenna shall be 500 MHz to 865 MHz, its antenna gain 1 db. The omni-directional antenna shall be the RA 4000 W from AKG.

6 4 Channel IVM 4500 System 4 Channel System Part List 4 x 3097H00xx0 IVM 4500 IEM (3095H00xx0 - SST 4500 IEM H00xx0 - SPR 4500 IEM) 1 x 3098H00xx0 SPC x 3009H00150 SRA 2 W or 1 x 2632H00310 RA 4000 W 4 x 6000H02060 MK PS RG58 cable 0.65m 1 x 2455Z00620 MK A5 RG58 cable 5m 2 x 7601H00110 AC12 EU/US/UK 2000mA or 1 x 2997H000x0 PSU 4000