TFT LCD MONITOR PRODUCT SPECIFICATION MODEL: KT-LS22AX---05 ISSUE DATE: Prepared by KORTEK R&D CENTER KORTEK CORPORATION

Transcription

1 TFT LCD MONITOR PRODUCT SPECIFICATION MODEL: KT-LS22AX---05 ISSUE DATE: Prepared by KORTEK R&D CENTER KORTEK CORPORATION RoHS Compliant 2002/95/EC Note: Any Modification or Copy of Spec is not allowed without KORTEK s Permission. c Copyright 2009 KORTEK Corporation Page 1 of 26

2 Contents 1. Revision History Scope 4 3. Feature Electrical Specification 4.1 Input Power Input Signal Display Color Mode & Timing.. 6 ~ 8 5. LCD Panel Specification 5.1 Screen Specification. 9 ~ Test Equipment Setup Backlight Unit CIE Coordinates Absolute Maximum Rating Visual Specification 6.1 Standard Mode & Display Size Standard Condition Screen Image Stabilizing time H.V Centering Focus Color Spread Noise Jitter Residual Image Crosstalk A/D Board 7.1 A/D Board Dimension A/D Board connection ~ Input signal mode Inverter Specification 8.1 Dimension Input Connector Output Connector User Interface 9.1 OSD Key Dimension Key Functions OSD Menu Structure. 21 ~ Function (OSD) Menu Actions.. 24 ~ Mechanical Specification Outline Dimension. 27 c Copyright 2009 KORTEK Corporation Page 2 of 26

3 1. Revision History Date Rev. No Page Summary Rev0.0 All 1 st issued Rev0.1 All Main parts change LTM220MT05, GH317A(A1) c Copyright 2009 KORTEK Corporation Page 3 of 26

4 2. Scope This document is the specification of 22 TFT-LCD MONITOR for application of Multi sync. KT-LS22AX---05 is a High quality TFT-LCD display solution for industrial display device having RoHS conformity. 3. Features - Native Resolution: WSXGA+ (1680 * Recommend (1680 * 60Hz) - Image Screen Input Signal: Analog, DVI (Digital) - Flexible Solution of Mechanical Mounting - On Screen display (OSD) 4. Electrical Specification 4.1 Input Power Input power is required as Voltage: DC +12[V] / 4.16[A] Consumption: 45[W] Max Power Management Mode V-Sync H-Sync Video Power Consumption ON Pulse Pulse Active Less than 45[W] Stand By Pulse No Pulse Blanked Less than 4.5[W] Suspend No Pulse Pulse Blanked Less than 4.5[W] Off No Pulse No Pulse Blanked Less than 4.5[W] Transition between states shall not require any manual display adjustment otherwise noted. There is no restriction on any combination of state transition. Zi is recommended that the display wait for about 2 seconds before transition. From on to avoid unintentionally entering a power saving state during change resolution or frequency. 4.2 Input Signal Analog R,G,B input Signal: RED, GREEN, BLUE Polarity: Positive Level: Analog from to 2.5 [V P-P ] Maximum Dot Clock: 165[MHz] Horizontal Sync Polarity: (+) or (-) H, V Separate, Composite sync Level: TTL Compatible High: 2.4 ~ 5.0[V] Low: 0.0 ~ 0.8[V] Scan Frequency: 15 ~ 80.0[KHz] c Copyright 2009 KORTEK Corporation Page 4 of 26

5 4.2.3 Vertical Sync Polarity: Positive or Negative H&V Separate Level: TTL Compatible High: Volt Low: Volt Scan Frequency: 55 75[Hz] Scanning Mode : Non-Interlaced and Interlaced modes Digital input Signal: TMDS (DVI 1.0) Maximum Dot Clock: 25~165[MHz] 4.3 Display Color : 16,777,216 colors c Copyright 2009 KORTEK Corporation Page 5 of 26

6 4.4 Mode & Timing Preset Mode Timing Chart 1 Time Block 2 Detail Timing VESA Standard Mode1 Mode2 Mode3 Mode4 Mode5 Mode6 Mode7 Mode8 Mode9 Description Freq [KHz] A[Pixels] B [Pixels] H C [Pixels] D [Pixels] E [Pixels] Pol NEG NEG NEG POSI POSI NEG POSI POSI POSI Freq [KHz] A [Lines] B [Lines] V C] [Lines] D [Lines] E [Lines] Pol POSI NEG NEG POSI POSI NEG POSI POSI POSI Pixel Clock [MHz] c Copyright 2009 KORTEK Corporation Page 6 of 26

7 4.4.2 Supply Video Timing Chart (VESA) : Native Mode Resolution Refresh Rate H Frequency Main Frequency Remark 640 x Hz 31.5 khz MHz 720 x Hz 31.5 khz MHz Text Mode 60 Hz 31.5 khz MHz n/a 640 x Hz 37.9 khz MHz VESA 75 Hz 37.5 khz MHz VESA 56 Hz 35.1 khz MHz VESA 800 x Hz 37.9 khz MHz VESA 72 Hz 48.1 khz MHz VESA 75 Hz 46.9 khz MHz VESA 60 Hz 48.4 khz MHz VESA 1024 x Hz 56.5 khz MHz VESA 75 Hz 60.0 khz MHz VESA 1152 X Hz 67.5 KHz MHz VESA 1280 x Hz 60.0 khz MHz VESA 1280 x Hz 64.0 khz MHz VESA 75 Hz 80.0 khz MHz VESA 1680 x 1050 (*) 60 Hz khz MHz VESA c Copyright 2009 KORTEK Corporation Page 7 of 26

8 4.4.3 Supply Video Timing Chart (CGA) No. Resolution H-Freq.(KHz) V-Freq.(Hz) H-TOTAL V-TOTAL 1 678x240(CGA) x239(CGA) x240(CGA) x240(CGA) x239(CGA) x226(CGA) x256(CGA) x224(CGA) x238(CGA) x287(CGA) x287(CGA) x226(CGA) x222(CGA) x256(CGA) x257(CGA) x288(CGA) x288(CGA) x224(CGA) x247(CGA) x247(CGA) x248(CGA) x240(CGA) x240(CGA) x226(CGA) x240(CGA) x244(CGA) x256(CGA) x239(CGA) x287(CGA) x238(CGA) x234(CGA) x224(CGA) x224(CGA) x400(EGA) c Copyright 2009 KORTEK Corporation Page 8 of 26

9 5. LCD Panel Specifications 5.1 Screen Specification Item Specification Unit Remark Note Display Area (H) x 296.1(V) mm Driver Element a-si TFT active matrix Dot Display Colors 16,78M (True) Color Number of Pixel 1,680 x 1,050 Pixel Pixel Arrangement RGB Vertical Stripe Pixel Pitch 0.282(H) x 0.282(W) mm Display Mode Normally White Viewing Angle 80/80/80/80 (U/D/L/R) Degrees CR 10 1 Weight 2,600g (Typ.) g Contrast Ratio Typ = 1000:1 Center of Screen Response Time On/Off = 5 ms Typ. 3 Center of White Luminance Typ = 250cd/m 2 cd/m 2 Screen 4 5 Brightness Uniformity Typ = 25 % % 6 Dimensions (H) x (V) x 17 (D) (Typ) mm Vendor Name: SAMSUNG c Copyright 2009 KORTEK Corporation Page 9 of 26

10 1 Viewing Angle Hor. Ver. θ L Right 80 θ R CR 10 Left 80 ø H (at center of screen) Up 80 ø L Down 80 Degree 2 Contrast Ratio (CR): Ratio of gray max. (G max.), gray min. (G min.) at the center point of panel. Luminance of all pixels White CR = Luminance of all pixels black 3 Response Time: Sum of T R,T F 4 Luminance of White (Center of Screen) Y L = 250 cd/m 2 (Typ.) 5 Optical characteristics measurement c Copyright 2009 KORTEK Corporation Page 10 of 26

11 5.2 Test Equipment Setup After stabilizing and leaving the panel alone at a given temperature for 30 min, the measurement should be executed. Measurement should be executed in a stable, windless, and dark room 30 min after lighting the back-light. This should be measured in the center of screen. A single lamp current: 7.5[mA] Environment condition: Ta = 25 ±2 [ ] 6 Brightness uniformity (9 points) Buni = 100*(Bmax-Bmin)/ Bmax Bmax: Maximum brightness, Bmin: Minimum brightness Definition of test point c Copyright 2009 KORTEK Corporation Page 11 of 26

12 5.3 Back Light Unit The Back-light system is an edge-lighting type with 2 dual CCFL. (Cold Cathode Fluorescent LAMP) Item Symbol Min Typ. Max Unit Lamp Current I L ma RMS Lamp Voltage V L 760 V RMS Freq. f L KHz Operating Life Time H r 50, Hour Startup Voltage V s - - 1,400(25 ) 1,700(0 ) V RMS 5.4 CIE Coordinates (Color Chromaticity) Item X(Typ.) Color chromaticity (CIE 1931) Y(Typ.) Red 0.645± ±0.03 Green ± ±0.03 Blue ± ±0.03 White ± ±0.03 c Copyright 2009 KORTEK Corporation Page 12 of 26

13 5.5 Absolute Maximum Rating Absolute rating of environment ITEM Symbol Min Max Unit Note Storage temperature T STG (1) Operating temperature (Surface of Glass temperature) T OPR 0 50 (1) Shock (non - operation) S NOP - 50 G (2),(4) Vibration (non operating) V NOP G (3),(4) * Note (1) Temperature and relative humidity range are shown in the figure below, 90% RH Max. (40 Ta) (2) 11ms, sine wave, one time for ±X, ±Y, ±Z axis. (3) Hz, Sweep rate 10min, 30min for X, Y, Z axis. (4) At testing Vibration and Shock, the fixture in holding the Module to be tested have to be hard and rigid enough so that the Module would not be twisted or bent by the fixture. c Copyright 2009 KORTEK Corporation Page 13 of 26

14 6. Visual Specification 6.1 Standard Mode & Display Size Item Specification Note Standard Mode WSXGA+ 1680* 60 [Hz]Resolution Recommend Mode Display Size (H) x 296.1(V) Panel Active Visual Size 6.2 Standard Condition Item Specification Note Warm up Time Panel Face 30 minutes after lighting None 6.3 Screen image Stabilizing Time Item Specification Note Video Display Time Display Stability time AC input Voltage Stability After turning power switch on, within 15 seconds After turning power switch on, within 30 seconds All specifications should be within 10% at 100~240V. Environments stability All specifications should be within 2% at the operating temperature Note) All kinds of specification should be satisfied after 30 minutes from turning power switch on. 6.4 H & V Centering : , 60Hz A-B and C-D 1.0[mm], E-F and G-H 1.0[mm] c Copyright 2009 KORTEK Corporation Page 14 of 26

15 6.5 Focus Focus shall be inspected using the H character pattern with normal and reverse video, after setting by brightness 80 steps & contrast 80 steps. All black/white and white/black transients shall be clearly visible on all points on the screen, and the focus performance shall be uniform across from a viewing distance of 50cm 6.6 Color Spread The color must not spread on the panel, especially on the 4 side that panel and bezel contact each other. 6.7 Noise, Jitter, Color lack, Screen shrink, and etc. During the operating there should not show on the screen like a noise, jitter, color lack, screen shrink, and etc. 6.8 Residual Image After 10 hours aging at same pattern, there s no residual image after 2 hours aging. 6.9 Crosstalk Any boundary line must not be seen on the white pattern. c Copyright 2009 KORTEK Corporation Page 15 of 26

16 7. A/D Board This board is main controller board and has following functions. - Analog to Digital Conversion (R,G, B Gain Control) - Scaling: input signal to fit Panel s resolution. - Inverter Power control. - DC to DC conversion to supply various power to each circuit 7.1 A/D Board Dimension c Copyright 2009 KORTEK Corporation Page 16 of 26

17 7.2 A/D Board connection Symbol Description Parts Number Manufacture J1 OSD KEY 12512WS-5A00 STR YEONHO J2 LVDS_OUT (Dual & Single) 12507WR-30PIN YEONHO J3 Analog (R,G,B) Input / ISP (Debugger ) J4 Reserved connector for touch controller s power (+12V,+5V) 12512WS-3A00 STR YEONHO J5 Inverter 12512WS-9A00 STR YEONHO J6 Power Input (+12V) J7 Power Input - Option (+12V) SMAWH200-2PIN YEONHO J8 CGA Input connector J1 : OSD Key Pin Signal Pin Signal Pin Signal Pin Signal Pin Signal 1 MENU 2 SELECT 3 GND 4 UP 5 DOWN J2 : LVDS_OUT Pin Signal Pin Signal Pin Signal Pin Signal Pin Signal 1 POWER 7 TXE0M 13 GND 19 TXO0P 25 TXO2P 2 POWER 8 TXE0P 14 TXECKM 20 GND 26 TXOCKM 3 POWER 9 TXE1M 15 TXECKP 21 TXO1M 27 TXOCKP 4 NC 10 TXE1P 16 TXE3M 22 TXO1P 28 TXO3M 5 NC 11 TXE2M 17 TXE3P 23 GND 29 TXO3P 6 NC 12 TXE2P 18 TXO0M 24 TXO2M 30 GND J3 : Analog R,G,B Input Pin Function Pin Function Pin Function 1 Red 6 Red ground 11 Reserved 2 Green 7 Green ground 12 DDC SDA 3 Blue 8 Blue ground 13 HSYNC (horizontal sync) Composite Sync Input (CGA) 4 Reserved 9-14 VSYNC (vertical sync) 5 Ground 10 Sync Ground 15 DDC SCL c Copyright 2009 KORTEK Corporation Page 17 of 26

18 7.2.4 J4 : Touch controller s power Pin Signal Pin Signal Pin Signal 1 +12V 2 +5V 3 GND J5 : Inverter Control Pin Signal Pin Signal Pin Signal Pin Signal Pin Signal 1 INV ON/OFF 2 A_DIM 3 GND 4 GND 5 +12V 6 +12V J8 : CGA Input connector Pin Signal Pin Signal Pin Signal Pin Signal Pin Signal 1 RED 2 Green 3 Blue 4 GND 5 V sync 6 H sync 7 N.C 8 GND 9 V sync 10 H sync Comp sync 7.3 Input signal mode Input signal Interface 1 ANALOG RGB (ADC) interface Max. 165MHz sampling rate support UXGA/60Hz Analog R'B'G' (3D space cube coordinate system ) known as SOG (Sync-on-Green) c Copyright 2009 KORTEK Corporation Page 18 of 26

19 8. Inverter Specification This board generates AC 800 [V RMS ] from DC +12[V], and This AC used to turn on CCFL. (Cold Cathode Fluorescent Lamp) 8.1 Inverter Dimension 8.2 Input Connector CN1 : WR-12A00 (Yeon Ho) Pin No Symbol Description 1,2,3 Vin Input : +11~13V 4,5,7,8,10,12 GND GND 11 Dim control 0V: Max Brightness, 5V: Min Brihtness 9 On/ Off Lamp Turn on & Off (5V: On, 0V: Off) 8.3 Output Connector : CN2/CN3 : 35001WR-02A00 (Yeon Ho) Pin No. Symbol Description 1 Lamp H1 High Voltage 2 Lamp L1 Return (Low Voltage) * Caution: When output connector is checked, the power should be turn off. Otherwise maybe be shocked electrically. c Copyright 2009 KORTEK Corporation Page 19 of 26

20 9. User Interface 9.1 OSD Key Dimension 9.2 Key Functions. Button Action DOWN / Decrease UP / Increase Menu/Exit Select 1. Move down menu to select. 3. Brightness /Contrast Hot Key 1. Move up menu to select 3. CGA Adjust Hot Key. Enable / Disable OSD Menu. Select current OSD Menu 2. Decrease the value 2. Increase the value c Copyright 2009 KORTEK Corporation Page 20 of 26

21 9.3 OSD Menu Structure. Main Menu Exit Color Settings OSD Settings Function Resolution 60Hz x1024 Main OSD Color Settings srgb Preset 9300K Preset 6500K Preset User Preset Exit Red 100 Green 100 Blue 100 Color Settings Menu c Copyright 2009 KORTEK Corporation Page 21 of 26

22 On Screen Display(OSD) Exit Horizontal Position Vertical Position OSD Hold Time On Screen Display (OSD) Menu Function Exit Input Level Step1 Function Menu Brightness/Contrast Exit ss Brightne Contrast Brightness/Contrast Menu c Copyright 2009 KORTEK Corporation Page 22 of 26

23 Exit AutoAjdust AutoColor ResetPosition Input Level Step1 H-Start 300 V-Start 14 H-Size 1280 V-Size 1024 Clock 1688 Phase 100 CGA Settings Menu c Copyright 2009 KORTEK Corporation Page 23 of 26

24 9.4 Function(OSD) Menu Actions Main Menu (Menu Button Click) Main Menu Sub-Menu Action Color Setting srgb Preset 9300K Preset 6500K Preset RED User Green User Blue User Preset Color srgb Preset Color 9300K Preset Color 6500K. User Setting of RED Color User Setting of Green Color User Setting of Blue Color OSD Setting Horizontal Position Vertical Position Hold Time Tuning menu of Screen s OSD Horizontal Position. Tuning menu of Screen s OSD Vertical Position. Tuning menu of Screen s OSD Duration Time Input Level Tuning menu of Screen s RGB Input Level. (Step1 : Max, Step2:Mid, Step3:Min) Function Brightness/Contrast Menu (Left Button Click) Menu Sub-Menu Action Brightness/ Contrast Brightness Contrast Tuning menu of Screen s Brightness Level(Inverter Dimming). Tuning menu of Screen s Contrast Level. c Copyright 2009 KORTEK Corporation Page 24 of 26

25 9.4.3 CGA Settings Menu (Right Button Click) Menu Sub-Menu Action CGA Settings AutoAdjust AutoColor ResetPosition Input Level H-Start V-Start H-Size V-Size Clock Phase Automatically Adjust Screen s Geometric, Position, Phase to Optimal Condition. Automatically Adjust RGB input level. Reset User Position Setting. (H-Start, V-Start, H-Size, V-Size, Clock, Phase Data Initial Settings) Tuning menu of Screen s RGB Input Level. Adjust Horizontal Start Position. Adjust Vertical Start Position. Adjust Horizontal Picture Size. Adjust Vertical Picture Size. Adjust Horizontal Total.(Warning: Must be Setting bigger than H-Size) Adjust Phase Settings. c Copyright 2009 KORTEK Corporation Page 25 of 26

26 10. Mechanical Specification 10.1 Outline Dimension c Copyright 2007 KORTEK Corporation Page 26 of 26