UNIVERSITY AT ALBANY HOW TO RECYCLE EMPTY BALLOON TIME HELIUM TANKS ON CAMPUS
|
|
|
- Julia Stafford
- 9 years ago
- Views:
Transcription
1 UNIVERSITY AT ALBANY HOW TO RECYCLE EMPTY BALLOON TIME HELIUM TANKS ON CAMPUS U N I V E R S I T Y A T A L B A N Y O F F I C E O F E N V I R O N M E N T A L H E A L T H & S A F E T Y /20/2016
2 BALLOON TIME HELIUM TANKS
3 RECYLING/DISPOSAL THE DISPOSAL OF A COMPRESSED GAS TANK/CYLINDER AT THE UNIVERSITY AT ALBANY IS REGULATED BY FEDERAL, STATE AND LOCAL REGULATIONS. THE FOLLOWING GUIDELINES WILL HELP ESTABLISH THE PROPER PROTOCOL ON HOW TO SAFELY RECYCLE EMPTY BALLOON TIME HELIUM TANKS. TO RECYCLE ALL OTHER TYPES OF COMPRESSED GAS TANKS/CYLINDERS, PLEASE CONTACT THE OFFICE OF ENVIRONMENTAL HEALTH & SAFETY AT (518)
4 HOW TO DISPOSE OF YOUR BALLOON TIME HELIUM BALLOON KIT VIDEO SOURCE:
5 WARNINGS & PRECAUTIONS Before using the Balloon Time Helium Balloon Kits, please familiar yourself with the following warnings. These warnings can also be found on the product carton. Keep out of the reach of children. Balloons represent a possible choking hazard. Children under eight years can choke or suffocate on uninflated or broken balloons. Adult supervision is required. Keep uninflated balloons away from children. Discard broken balloons immediately. Do not place nozzle in mouth or nose for any reason. Doing so can damage lungs and other body parts, which can result in serious personal injury or death. The cylinder contains compressed helium under pressure.
6 WARNINGS & PRECAUTIONS Do not inhale helium. Use only in a well ventilated area. Never use in closed spaces. Helium reduces and can eliminate oxygen available for breathing. Inhaling helium can result in serious personal injury or death. Do not refill with any material. This is a non-refillable cylinder. This could result in violent bursting of the cylinder resulting in serious personal injury or death. Do not store in damp areas. This can cause the cylinder to rust. Rusting of the cylinder can result in a violent bursting of the cylinder resulting in serious personal injury or death. Never expose the cylinder to direct heat or fire. Exposure to those conditions could result in the operation of the pressure relief device, which will result in a sudden discharge of pressure from the cylinder, resulting in serious personal injury or death.
7 WARNINGS & PRECAUTIONS Do not mistreat the tank by dropping on sharp or pointed surfaces. This could puncture the tank causing a sudden release of the contents resulting in serious injury or death. For more information on helium gas, refer to the Balloon Time Helium Material Safety Data Sheet
8 DISPOSAL/RECYCLING OF EMPTY BALLOON TIME TANKS WARNING: Failure to follow these instructions for safe disposal of the non-refillable Balloon Time tank can result in an immediate release of gaseous helium resulting in personal injury, property damage or both. Balloon Time is a non-refillable tank. Please do not refill it with any substance. Read all tank warnings for more information
9 DISPOSAL/RECYCLING OF EMPTY BALLOON TIME TANKS 1. Only attempt disposal of the Balloon Time tank when it is empty. 2. Take the tank to a well-ventilated area. Fully open the valve handle by turning it counter-clockwise. Press and hold down on the tilt-nozzle (see photo 2) until the tank is empty. Listen and feel for pressure discharging from the tilt-nozzle. The tank is empty when no sound is heard or pressure is felt. 3. Unscrew and remove the tilt-nozzle (see photo 3) either by hand or with the help of a ¾ inch wrench.
10 DISPOSAL/RECYCLING OF EMPTY BALLOON TIME TANKS 4. Take the tank to a steel recycling center or place with curbside recycling pickup. However, please note that recycling programs for this product may not exist in your area. If your local steel recycling center or curbside recycling will not accept the empty Balloon Time tank, please continue with these additional instructions. 5. Place the tip of a flat-head screwdriver on the inside serration of the rupture disc located on the shoulder of the tank (see photo 5). 6. With a hammer or mallet, LIGHTLY tap the handle of the screwdriver to pierce the rupture disc open (see photo 6).
11 DISPOSAL/RECYCLING OF EMPTY BALLOON TIME TANKS 7. Carefully, completely open the rupture disc. With a permanent magic marker, draw a large circle around the open rupture disc and write the word EMPTY on the tank (see photo 7). 8. Once the rupture disc is open, the tank can be recycled with other steel recyclables at your local recycling center or Solid Waste Authority (SWA). The phone number for your local SWA can be found in the blue government section of your white pages. If your local SWA will not accept the punctured tank, dispose of the punctured tank in your trash. To recycle tanks at the University at Albany, once you have completed Step #7, bring the empty tank to the Social Sciences loading dock and place the tank in the scrap metal dumpster.
12 PRAXAIR MSDS (SDS)
13 PRAXAIR MSDS (SDS)
14 PRAXAIR MSDS (SDS)
15 PRAXAIR MSDS (SDS)
MATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET SECTION 1. PRODUCT IDENTIFICATION PRODUCT NAME: CHEMICAL NAME: FORMULA: SYNONYMS: Helium, compressed Helium He Helium gas, Gaseous helium, Balloon gas MANUFACTURER: Air Products
Compressed Gas Cylinder Storage and Handling Guide
Overview Compressed gas cylinders are used in many workplaces to store gases that vary from extremely flammable (acetylene) to extremely inert (helium). Many compressed gas cylinders are stored at extremely
HAZARD COMMUNICATION: NEW LABEL ELEMENTS AND SAFETY DATA SHEET (SDS) FORMAT
HAZARD COMMUNICATION: NEW LABEL ELEMENTS AND SAFETY DATA SHEET (SDS) FORMAT AGENDA Hazard Communication Recent Changes Pictograms New Label Format Signal Word Safety Data Sheets 2 HAZARD COMMUNICATION:
Compressed Gas Cylinder Safety
Compressed Gas Cylinder Safety I. Background. Due to the nature of gas cylinders, special storage and handling precautions are necessary. The hazards associated with compressed gases include oxygen displacement,
COMPRESSED GASES. 1.2 The contents of each cylinder and container must be clearly identified (by tag or stamp) on the cylinder.
Page 1 of 5 COMPRESSED GASES A compressed gas is defined as any mixture of gases in a container with a pressure exceeding 40 psi. at 70 o F, or 104 psi. at 130 o F; or any flammable liquid with an absolute
=.03% CO2 10/4/2012. Carbon Dioxide (CO2) Safety. Carbon Dioxide (CO2) Safety. Carbon Dioxide (CO2) Safety. Carbon Dioxide (CO2) Safety
Carbon Dioxide (CO2) Safety Training Topics we ll cover General properties and uses of CO2 Potential risks of exposure and symptoms Handling, storage, and equipment safety features Safety considerations
NITROUS TRANSFER PUMP INSTRUCTIONS
NITROUS TRANSFER PUMP INSTRUCTIONS SAFETY TIPS Never directly inhale nitrous oxide. When inhaled in large quantities, nitrous oxide can cause respiratory ailments or in extreme cases, death by suffocation.
MATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET SECTION 1. PRODUCT IDENTIFICATION PRODUCT NAME: CHEMICAL NAME: Nitrogen, compressed Nitrogen FORMULA: N 2 SYNONYMS: Nitrogen gas, Gaseous Nitrogen, GAN August 1997 MANUFACTURER:
Compressed Gas Cylinder Program
Department of Environmental Health & Safety Procedures Compressed Gas Cylinder Program March 2010 Compressed Gas Cylinder Program Page 1 of 8 Table of Contents I. Introduction II. III. IV. Policy Scope
Material Safety Data Sheet
Material Safety Data Sheet STAINLESS STEEL CLEANER & POLISH 1. Trade name of product Product use Code Date of issue Product and company identification Product dilution information STAINLESS STEEL CLEANER
MATERIAL SAFETY DATA SHEET
` MATERIAL SAFETY DATA SHEET SECTION 1. PRODUCT IDENTIFICATION PRODUCT NAME: Hydrogen, compressed CHEMICAL NAME: Hydrogen FORMULA: H 2 SYNONYMS: None MANUFACTURER: Air Products and Chemicals, Inc. 7201
GUIDANCE NOTE. Gas welding safety COMMISSION. commission for occupational safety and health
GUIDANCE NOTE Gas welding safety COMMISSION commission for occupational safety and health Contents Page Introduction...3...4...4...5...5...6...7...7...8...9...10...11 A guidance note is an explanatory
Praxair Material Safety Data Sheet
Praxair Material Safety Data Sheet 1. Chemical Product and Company Identification Product Name: Neon, compressed (MSDS No. Trade Name: Neon P-4629-C) Chemical Name: Neon Synonyms: Refrigerant gas R720
MATERIAL SAFETY DATA SHEET. PRODUCT IDENTIFIER Carbon Dioxide, Refrigerated Liquid
SECTION I- Product Information* MANUFACTURER: EPCO Carbon Dioxide Products, Inc. OFFICE PHONE: 1-800-259-3726 24-HOUR EMERGENCY: 1-800-259-8095 SHIPPING NAME: Carbon Dioxide, Refrigerated Liquid UN NUMBER:
User s Guide CARBON DIOXIDE CYLINDERS AND REGULATORS
IMI CORNELIUS INC One Cornelius Place Anoka, MN 55303-6234 Telephone (800) 238-3600 Facsimile (612) 422-3246 User s Guide CARBON DIOXIDE CYLINDERS AND REGULATORS Part No. 316704000 June, 1974 Revised:
Cleaning Instructions for Burner, Pilot Assembly, and Emitter Screen. Series: 150000 200605 LP Gas
Cleaning Instructions for Burner, Pilot Assembly, and Emitter Screen Series: 150000 200605 LP Gas Tools needed Bottle brush Non-abrasive scouring pad Small utility brush Heavy-duty pipe cleaners Air hose
National- Spencer Inc.
9-27-2010 National- Spencer Inc. 19.2V HEAVY DUTY GREASE GUN PRODUCT SPECIFICATION Charger Input Power 110 VAC Battery Output Power 19.2V Battery Capacity 1500 MAH Battery Pack Charge Time 1 Hour Maximum
Mechanical Systems Competency 1.20
Competency 1.20 Mechanical systems personnel shall demonstrate a working level knowledge of the safety and health fundamentals of mechanical systems and/or components. 1. Supporting Knowledge and Skills
Subject: Magnet Safety. Overview: Environmental Health & Safety Policy/Procedure Effective Date: July 29, 2011
Subject: Magnet Safety Environmental Health & Safety Policy/Procedure Overview: The purpose of this document is to define and clarify policies associated with the use of magnets and magnetic fields at
Instructions For SF 6 Refill Kit
S&C Vista Underground Distribution Switchgear UnderCover, Vault-Mounted, and Pad-Mounted Styles Instructions For SF 6 Refill Kit TABLE OF CONTENTS Section Page Section Page INTRODUCTION..................................
Dive Rite 200 & 300 Bar Isolator Manifold Service Manual
Dive Rite 200 & 300 Bar Isolator Manifold Service Manual Principal Photography and Text by Pete Nawrocky Copyright 2003 Lamartek Inc. D/B/A Dive Rite 0 Warning This manual is only to be used as a guide
MATERIAL SAFETY DATA SHEET - Air-Compressed
1. PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: CHEMICAL NAME: CHEMICAL FAMILY: SYNONYMS: CHEMICAL FORMULA: USE: NAME AND ADDRESS: Air, compressed Air Nonflammable gas Medical Air, Breathing Air, Compressed
WINDEX ORIGINAL GLASS CLEANER
1. PRODUCT AND COMPANY IDENTIFICATION Product information Trade name : Use of the : Hard Surface Cleaner Substance/Mixture Company : S.C. Johnson and Son, Limited 1 Webster Street Brantford ON N3T 5R1
Department of Transportation Hazardous Material Regulations General Awareness, Safety & Security Training. For: University of Dayton Hazmat Employees
Department of Transportation Hazardous Material Regulations General Awareness, Safety & Security Training For: University of Dayton Hazmat Employees February, 2014 Overview Hazardous materials are substances
Pressure Vessels (Air Compressors) and LPG Tanks
Pressure Vessels (Air Compressors) and LPG Tanks 1. Identification of Workplace Hazard Any container, tank or vessel that contains pressurized material is a potential hazard to employees due to the force
Housekeeping and Material Storage
29CFR 1926.20(b)-Accident Reduction, 29CFR 1926.21- Safety Training & Education 29CFR 1926.20(a)-Unsafe Working Conditions Housekeeping and Material Storage Preparation 1. Read Applicable Background information
Detach Patient's Instructions for Use from package insert and dispense with the product.
Attention Health Care Professional: Detach Patient's Instructions for Use from package insert and dispense with the product. PROVENTIL HFA (albuterol sulfate) Inhalation Aerosol FOR ORAL INHALATION ONLY
HAZARD COMMUNICATION & THE GLOBAL HARMONIZING SYSTEM EMPLOYEE TRAINING
HAZARD COMMUNICATION & THE GLOBAL HARMONIZING SYSTEM EMPLOYEE TRAINING This easy-to-use Leader s Guide is provided to assist in conducting a successful presentation. Featured are: INTRODUCTION: A brief
COMPRESSED GAS CYLINDER PROGRAM
COMPRESSED GAS CYLINDER PROGRAM Department of Environmental Health & Safety Phone: (410) 704-2949 Fax: (410) 704-2993 Emergency: (410) 704-4444 Email: [email protected] Website: www.towson.edu/ehs/index/html
Tri-Homo Style Operation and Maintenance Instructions
Tri-Homo Style Operation and Maintenance Instructions One Research Drive Stratford, CT 06615 (203) 375-0063 www.sonicmixing.com 1 Installation and Start-up Do not perform following adjustments without
* * * EMERGENCY OVERVIEW * * * High pressure gas. Can cause rapid suffocation. Can increase respiration and heart rate.
SUPPLIER ADDRESS: PRODUCT NAME: Saxon Wharf, Lower York St Southampton SO14 5QF, UK 1. CHEMICAL PRODUCT EMERGENCY PHONE NUMBER: COMPRESSED GAS, N.O.S. SYNONYMS: None (Contains: CARBON DIOXIDE & NITROGEN)
MATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET I. PRODUCT & COMPANY IDENTIFICATION Product Name: Hawaiian Tropic Tanning Dry Oil Clear Spray Sunscreen SPF 6 Product Code(s): 41-00400 Product Type: Tanning Product Supplier
Parallel Circuits Charles Lang
SCIENCE EXPERIMENTS ON FILE Revised Edition 6.20-1 Parallel Circuits Charles Lang Topic Parallel circuits Time 1 1 2 hours! Safety Adult supervision is required. Please click on the safety icon to view
Compressed Gas Cylinders: Proper Management And Use
General Assistance Office of Environment, Health & Safety 642-3073 Emergency Phone Numbers Emergencies: Life-threatening Emergency or Imminent Hazard to the Environment 911 From cell phone 642-3333 Non
QuickAir - 5, - 10 Minute Emergency Escape Breathing Apparatus. Operating Manual
QuickAir - 5, - 10 Minute Emergency Escape Breathing Apparatus Operating Manual Table of Contents 1 General... 2 1.1 Purpose... 2 1.2 Description... 2 2 Operation... 3 2.1 Pre-donning Inspection... 3 2.1.1
SOCALGAS APROACH TO PIPELINE INTEGRITY
SUMMER 2011 SOCALGAS APROACH TO PIPELINE INTEGRITY Southern California Gas Company (SoCalGas ) is committed to providing clean, safe and reliable natural gas to its customers and takes important steps
15GAL STEEL OIL DRAIN WITH 110V PUMP
15GAL STEEL OIL DRAIN WITH 110V PUMP OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
Methane in Air 0.0001% to 2.5%
Kele part# GAS-CH4-2.5 Emergency Contact: Chemtrec (800) 424-9300 Or rco (208) 336-1643 1125 West Amity Road Boise, ID 83705 (208) 336-1643 Methane in Air 0.0001% to 2.5% M A T E R I A L S A F E T Y D
THE NEWCASTLE UPON TYNE HOSPITALS NHS FOUNDATION TRUST SAFE USE AND STORAGE OF LIQUID NITROGEN AND SOLID CARBON DIOXIDE (DRY ICE)
THE NEWCASTLE UPON TYNE HOSPITALS NHS FOUNDATION TRUST SAFE USE AND STORAGE OF LIQUID NITROGEN AND SOLID CARBON DIOXIDE (DRY ICE) GUIDANCE AND INFORMATION Effective: February 2007 Review February 2010
Material Safety Data Sheet
Material Safety Data Sheet Agar-agar MSDS 0 He a lt h Fire Re a c t iv it y Pe rs o n a l Pro t e c t io n 0 A Section : Chemical Product and Company Identification Product Name: Agar-agar Catalog Codes:
Voltmaster Trash Pumps Model TSP2, TSP3 and TSP4
Model TSP2, TSP3 and TSP4 Owner s Manual July 2010 Table of Contents 1 Introduction...................................................... 1 1.1 Read before using..............................................
Praxair Material Safety Data Sheet
Praxair Material Safety Data Sheet 1. Chemical Product and Company Identification Product Name: Helium, compressed (MSDS No. P-4602-G) Trade Names: Helium, LaserStar Helium, Medipure Helium, UltraLift
SAFETY DATA SHEET IRODA BUTANE REFILL
1. IDENTIFICATION OF THE PREPARATION AND THE COMPANY Product Name: Iroda Butane Refill Synonyms, Trade Names: Butane Fuel 18ml Applications: Gas lighter fuel Supplier: Emergency Telephone: -------------------------------------------------------------------------------------------------------------------------
Compressed Gas Cylinder Safety, Management and Disposal
Introduction Compressed gas cylinders are necessary in many campus operations and research. Compressed gases expose users to both chemical and physical hazards. Gases contained within compressed gas cylinders
Material Safety Data Sheet
Material Safety Data Sheet OASIS PRO 10 HEAVY DUTY ALL PURPOSE 1. Product and company identification Trade name of product Product use Product dilution information : OASIS PRO 10 HEAVY DUTY ALL PURPOSE
UCLA - Compressed Gas Cylinder Storage and Handling
UCLA - Compressed Gas Cylinder Storage and Handling Purpose UCLA is committed to provide safety guidelines concerning the handling and use of portable compressed gas cylinders. Compressed gases represent
Leader s Guide E4017. Bloodborne Pathogens: Always Protect Yourself
E4017 Bloodborne Pathogens: Always Protect Yourself 1 Table of Contents Introduction 3 Video Overview.3 Video Outline.4 Preparing for and Conducting a Presentation. 7 Discussion Ideas..8 Quiz..9 Quiz Answers...11
MATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET Page 1 of 6 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION MATHESON TRI-GAS, INC. Emergency Contact: 150 Allen Road Suite 302 CHEMTREC 1-800-424-9300 Basking Ridge, New Jersey
RAID MAX CRAWLING INSECT BUG KILLER
1. PRODUCT AND COMPANY IDENTIFICATION Product information Trade name : Use of the : Insecticide Substance/Preparation Company : S.C. Johnson and Son, Limited 1 Webster Street Brantford ON N3T 5R1 Emergency
WEEKLY SAFETY MEETING All Euramax Subsidiaries WELDING SAFETY / HOT WORK SAFETY. Safety Meeting Contents. Meeting Notice.
Safety Meeting Contents Meeting Notice Leaders Guide Employee Handout Employee Quiz Meeting Sign-In Sheet Employee Puzzle PRIOR TO THE WEEKLY MEETING: - Post the meeting notice by the timeclock - Read
MAP COFFEE MIA CAPSULE COFFEE MACHINE INSTRUCTION MANUAL MODEL: CM4725. Read this manual thoroughly before using and save it for future reference
MAP COFFEE MIA CAPSULE COFFEE MACHINE INSTRUCTION MANUAL MODEL: CM4725 Read this manual thoroughly before using and save it for future reference Purchase MAP capsules at Harvey Norman stores nationwide
Oxy-Fuel Gas Welding. Given a functional oxy-fuel gas unit, instruction and demonstration of use, each student will be able to:
I. Competencies Oxy-Fuel Gas Welding Given a functional oxy-fuel gas unit, instruction and demonstration of use, each student will be able to: A. Identify the major parts of the oxy-fuel gas unit. B. Pass
Mock OSHA Inspection:
Mock OSHA Inspection: PASS or FAIL? Infection Control OSHA Dental Practice Act HIPAA Presented by Leslie Canham, CDA, RDA, CSP (Certified Speaking Professional) In the dental field since 1972, Leslie helps
Iron Air Charge 2510-SXT Installation & Start-Up Guide
Iron Air Charge 2510-SXT Installation & Start-Up Guide Thank you for purchasing a Clean Water System! With proper installation and a little routine maintenance your system will be providing iron free water
Brock University Facilities Management Operating Procedures
Subject: Bodily Fluid Clean-Up Number: FMOP 2-3 Approval: Executive Director Issue Date: 22 Sep 08 Responsibility: Manager Custodial Services Review Period: 2 Years PROCEDURES FOR BODILY FLUID CLEAN-UP
MATERIAL SAFETY DATA SHEET
1/5 Label 2.2 Non flammable, non toxic gas. NFPA RATING 1 2 IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND OF THE COMPANY / UNDERTAKING Trade Name Carbon dioxide Chemical Formula CO2 Chemical Family
COMPRESSED GASES REVISION DATE: 1/15/08
#: 4301-06-123 Kathy Kiestler Page 1 of 7 1. Purpose: Compressed gas cylinders present a variety of potential hazards due to their pressure and/or contents. The use of compressed gases requires special
ASBESTOS AWARENESS IN THE WORKPLACE. This easy-to-use Leader s Guide is provided to assist in conducting a successful presentation.
ASBESTOS AWARENESS IN THE WORKPLACE This easy-to-use Leader s Guide is provided to assist in conducting a successful presentation. Featured are: INTRODUCTION: A brief description of the program and the
DuPont ISCEON MO89 refrigerant
This SDS adheres to the standards and regulatory requirements of Great Britain and may not meet the regulatory requirements in other countries. 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE
Safety Data Sheet (SDS) OSHA HazCom Standard 29 CFR 1910.1200(g) and GHS Rev 03.
Page 1/8 * 1 Identification Product identifier Product number: G-5215 Relevant identified uses of the substance or mixture and uses advised against Used for calibration of gas measuring devices. Not suitable
PET-10 INSTRUCTION MANUAL PRESSURE TANK
INSTRUCTION MANUAL PRESSURE TANK PET-10 This manual contains IMPORTANT WARNINGS and INSTRUCTIONS. Equipment in this manual is exclusively for painting purposes. Do not use for other purposes. The operator
Version: 1.0 Revision Date: 06/25/2013 Print Date: 06/25/2013 POOL TIME D.E. FILTER POWDER
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name: Product Use Description: Recreational Water Product Chemical nature: Silica Company: Recreational Water Products Pool Time PO Box 1449 Buford,
FREEPHONE: 0800 059 9112 EMAIL: [email protected]. Asbestos Awareness. Toolbox Talk
FREEPHONE: 0800 059 9112 EMAIL: [email protected] Asbestos Awareness Toolbox Talk ASBESTOS AWARENESS Why is it a Problem Asbestos was extensively used as a building material in the UK from the
Berea College Chemical waste/product Management Guide. October 2014
Berea College Chemical waste/product Management Guide October 2014 Chemical Waste Chemical waste is generated in many locations across campus. Chemical waste is generated in laboratories, from painting
Material Safety Data Sheet
Material Safety Data Sheet Aloe Vera MSDS 0 Section : Chemical Product and Company Identification He a lt h Fire Re a c t iv it y Pe rs o n a l Pro t e c t io n 0 A Product Name: Aloe Vera Catalog Codes:
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING. Types : ASHRAE Refrigerant number designation: R-507
This SDS adheres to the standards and regulatory requirements of the European Community and may not meet the regulatory requirements of other countries. 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND
3 WATT LED SPOTLIGHT Model No. SLM - 3801
3 WATT LED SPOTLIGHT Model No. SLM - 3801 OWNER'S MANUAL Customer Service Tel: 1-800-268-3319 Superex Canada Ltd, Toronto,M2H 3B8 Made in China Table of Contents A). Important Safety Instructions B). Charging
MODELS 93/693 By CO2 SEMI-AUTOMATIC
O p e r a t i o n M a n u a l MODELS 93/693 By CO2 SEMI-AUTOMATIC.177 cal BB (4.5 mm) STEEL AIRGUN SHOT 12gm CO2 cylinder only WARNING: NOT A TOY. ADULT SUPERVISION REQUIRED. MISUSE OR CARELESS USE MAY
INFRARED QUARTZ WALL HEATER
INFRARED QUARTZ WALL HEATER MODEL NO: IQ2000 PART NO: 6939004 MOUNTING & OPERATION INSTRUCTIONS GC0715 INTRODUCTION Thank you for purchasing this CLARKE Infrared Wall Heater. Before attempting to use this
Material Safety Data Sheet
Material Safety Data Sheet Green Tea Powder MSDS 0 He a lt h Fire Re a c t iv it y Pe rs o n a l Pro t e c t io n 0 E Section : Chemical Product and Company Identification Product Name: Green Tea Powder
MATERIAL SAFETY DATA SHEET
Air Liquide New Zealand Limited 19 Maurice Road Penrose Auckland 1061 Phone: (09) 622 3880 Fax: (09) 622 3881 Emergency: 0800 156 516 Product Name: MATERIAL SAFETY DATA SHEET ALPHAGAZ TM 1 - Helium Issued:
Praxair Material Safety Data Sheet
Praxair Material Safety Data Sheet 1. Chemical Product and Company Identification Product Name: Nitrogen, compressed (MSDS No. P-4631-H) Trade Names: Nitrogen, Medipure Nitrogen, Extendapak Nitrogen, Chemical
ALVERNIA UNIVERSITY OSHA REGULATION: 29 CFR 1910.252 WELDING, CUTTING, AND BRAZING ( HOT WORK ) SECTION: 3600
OSHA REGULATION: 9 CFR 90.5 WELDING, CUTTING, AND BRAZING ( HOT WORK ) A. POLICY. This procedure follows requirements set forth in 9 CFR 90.5.. This policy applies to all Hot Work operations being done
THERMIT WELDING (GB) LTD PROCESS MANUALS
THERMIT WELDING (GB) LTD PROCESS MANUALS SECTION FOUR GUIDELINES FOR SAFE OPERATION Page 1 SECTION 4 - GUIDELINES FOR SAFE OPERATION The information contained in this section is applicable to the THERMIT
GLADE AEROSOL SPRAY - LAVENDER & VANILLA
1. PRODUCT AND COMPANY IDENTIFICATION Product information Trade name : Use of the : Air Freshener Substance/Mixture Company : S.C. Johnson & Son, Inc. 1525 Howe Street Racine WI 53403-2236 Emergency telephone
Basic Safety Examination instructions
Name of candidate: This VCA mock examination is only intended for training purposes and is aimed at familiarising candidates with the examination methods. The questions are checked every year for accuracy
Material Safety Data Sheet
Material Safety Data Sheet OASIS 259 GLASS FORCE 1. Product and company identification Trade name of product Product use Product dilution information : OASIS 259 GLASS FORCE : Glass Cleaner : Up to 12.5
Technical Note 802 Leak Testing of Polyethylene Pipe For Municipal and Industrial Applications Part 1 Pre-Test Considerations
Technical Note 802 Leak Testing of Polyethylene Pipe For Municipal and Industrial Applications Part 1 Pre-Test Considerations Leak testing may be used to find leaks in a newly constructed or newly modified
: DuPont SUVA 410A Refrigerant
This SDS adheres to the standards and regulatory requirements of Great Britain and may not meet the regulatory requirements in other countries. 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE
UV100A Ultraviolet Air Treatment System
UV100A Ultraviolet Air Treatment System INSTALLATION INSTRUCTIONS APPLICATION When installed in forced air heating and cooling systems, the UV100A Ultraviolet Air Treatment System kills airborne microorganism
SCBA Frequently Asked Questions
SCBA Frequently Asked Questions Q. WHEN SHOULD I USE SCBA? A. An SCBA is the choice when dealing with any oxygen deficient atmosphere that is IDLH (Immediately Dangerous to Life or Health), or any environment
Material Safety Data Sheet
1 1 0 Material Safety Data Sheet Magnesium Amino Acid Chelate MSDS He a lt h Fire Re a c t iv it y Pe rs o n a l Pro t e c t io n 1 1 0 E Section 1: Chemical Product and Company Identification Product
What is Dry Ice? Dry Ice Company Safety Rules: DRY ICE: SAFETY DATA SHEET & RISK ASSESSMENT
DRY ICE: SAFETY DATA SHEET & RISK ASSESSMENT What is Dry Ice? Dry Ice is frozen carbon dioxide. Unlike most solids, it does not melt into a liquid, but instead changes directly into a gas. This process
Dear Neuton Owner, This is a helpful hint to guide you in getting the most out of your NEUTON Battery and Charger.
Battery-Powered Mower NEUTON 24-Volt Charger Instructions Booklet Dear Neuton Owner, In order for you to get the most out of your Neuton Mower, we recently reviewed and revised our battery-charging instructions.
TEMPORARY EMPLOYEES SAFETY PROCEDURES
TEMPORARY EMPLOYEES SAFETY PROCEDURES Temporary Agencies will ensure that any temporary employee sent to work at Modern will have received and understand the General Safety Rules. GENERAL SAFETY RULES
FJ2. 2 Ton Trolley Floor Jack Assembly & Operating Instructions
FJ2 2 Ton Trolley Floor Jack Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance.
HUMULIN 70/30 KwikPen
1 Instructions for Use HUMULIN 70/30 KwikPen (70% human insulin isophane suspension 30% human insulin injection [rdna origin]) Read the Instructions for Use before you start taking HUMULIN 70/30 and each
BPW32 DN15, DN20 and DN25 Balanced Pressure Wafer Steam Trap
1263050/6 IM-P126-07 ST Issue 6 BPW32 DN15, DN20 and DN25 Balanced Pressure Wafer Steam Trap Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation
PEROXIDE SAFETY DATA SHEET (60% H2O2) Safety Data Sheet
SAYFA : 1/6 1. Identification of the substance Identification of the product Product name : Hydrogen peroxide solution 60% Manufacturer / supplier identification Company : A.Ş. 600Evler Mahallesi Atatürk
PERSONAL PROTECTIVE EQUIPMENT HAZARD ASSESSMENT, EQUIPMENT SELECTION AND TRAINING DOCUMENTATION
DRAFT SAMPLE WRITTEN PERSONAL PROTECTIVE EQUIPMENT HAZARD ASSESSMENT, EQUIPMENT SELECTION AND TRAINING DOCUMENTATION For Compliance With 1910.132 Wyoming General Rules and Regulations Wyoming Department
Company Name Chemical Spill Prevention & Clean-up Procedures Program. Last Revised On 00/00/0000
Company Name Chemical Spill Prevention & Clean-up Procedures Program Last Revised On 00/00/0000 PURPOSE The following program will discuss how prevent chemical spills from occurring and setting forth procedures
Certain specific properties of compressed gases make them highly useful in various research activities.
GAS CYLINDER SAFETY Introduction Certain specific properties of compressed gases make them highly useful in various research activities. These gases, however, can be dangerous if not handled in an appropriate
SAFETY DATA SHEET TIDYFOAM E2 HAND CLEANER SANITIZER
SECTION 1 PRODUCT AND COMPANY IDENTIFICATION Product Name : Product Code : A7804F Recommended use : E2 hand wash and sanitizer Product dilution information : Product is sold ready to use. Manufactured
HOT WORK PERMIT PROCEDURES
COLUMBIA UNIVERSITY ENVIRONMENTAL HEALTH & SAFETY HOT WORK PERMIT PROCEDURES COLUMBIA UNIVERSITY MEDICAL CENTER February 2010 1 TABLE OF CONTENTS A. PURPOSE 3 B. SCOPE 3 C. POLICIES AND PROCEDURES 3-4
Compressed Gas Cylinder Safety
ISC Compressed Gas Cylinder Safety Training page 1 Compressed Gas Cylinder Safety This training program is adapted from the online OSHA training program on the Oklahoma State University OSHA training web
Quebec Quebec Tel : 418-834-7447 Fax : 418-834-3774 MSDS: P10 (10% Methane in Argon) PRODUCT INFORMATION
Tel: 514-956-7503 Fax: 514-956-7504 Internet: www.megs.ca Email : [email protected] Montreal Ottawa St-Laurent Nepean Tel : 514-956-7503 Tel : 613-226-4228 Fax : 514-956-7504 Fax : 613-226-4229 Quebec Quebec
Dry Ice Color Show Dry Ice Demonstrations
elearning 2009 Introduction Dry Ice Color Show Dry Ice Demonstrations Publication No. 95016 Add a small piece of solid carbon dioxide to a colored indicator solution and watch as the solution immediately
: Helium-4, refrigerant gas R-704, LaserStar Helium, Medipure Helium, UltraLift Helium, Helium - Diving Grade
SECTION: 1. Product and company identification 1.1. Product identifier Product form Name Helium : Substance : Helium CAS No : 7440-59-7 Formula Other means of identification : He 1.2. Relevant identified
