41376 UDP performing get device status Command Workstation (CWS), Harmony, Bi-directional Driver TCP/UDP

Transcription

1 TCP/IP ports that might be used with Canon office equipment (in alphabetical order) 3/1/2009 Axis Print server. This port is used to identify the status the axis print server. This is performed approx every 30 seconds and it communicates with any computer that has the Axis pordriver installed, even if the printer driver is not installed. Canon Network ScanGear, used when performing pull scaning from a computer. (Canon) Make sure that the NWSCAN setting in service mode is set to a 1, in Network Settings make sure that enable dedicated port is set to ON Canon Security Agent 5678 TCP Canon Service Support Tool (when in service mode) TCP/UDP YES Cascade printing and Remote printing (Canon) CNSSS (Canon Netspot Suite Services), used when performing get device status Command Workstation (CWS), Harmony, Bi-directional Driver TCP/UDP Command Workstation (CWS), Harmony, Bi-directional Driver 9906 UDP Device information Delivery (SLP Protocol) 427 TCP DHCP Client (Dynamic Host Configuration Protocol) 67 TCP DHCP Server (Dynamic Host Configuration Protocol) 68 TCP performing get device status from a computer printing directly to the Canon printer. 413 YES performing get device status from a worksation printing through a print server to the Canon printer. DNS (Domain Name Server) client to server lookup Domain Name reply 38 TCP Domain Name request 37 TCP mail, IMAP (Internet Message Access Protocol), Canon does 113 TCP not support IMAP , POP (Post Office Protocol) Incoming 110 TCP YES , SMTP (Simple Mail Transfer Protocol) Outgoing mail 25 TCP YES Fiery Downloader YES Fiery Get Device Status NO Fiery Scan YES Fiery WebTools YES FTP (File Transfer Protocol) 21 TCP YES FTP-DATA (File Transfer Protocol Data) 20 TCP NO Get Device Status (Canon), make sure that dedicated port in Network Settings is turned ON, also see CNNSSS and DIAS for additional ports used when performing get device status from the Canon print Hasp, TCP Net Hasp Server (Aladin Hasp software key) 475 TCP imageware Remote 443 TCP IPP printing (Internet Printing Protocol) 631 TCP YES Job Monitor (Fiery) TCP YES LDAP (Lightweight Directory Access Protocol) 389 TCP YES LDAPS (Lightweight Directory Access Protocol Secure, LDAP 636 TCP YES w/ssl) LPR (Line Printer Remote) printing spooler / Fiery Scan / Fiery YES Downloader MEAP SMS 8000 TCP YES

2 NetBIOS Datagram (used for SMB protocol and network 138 UDP NO datagram responses) NetBIOS Nameserver (used for SMB protocol and network 137 TCP/UDP NO browsing NetBIOS Session service (used for SMB protocol), DNS 139 TCP YES Administration TCP Network ScanGear, also see Canon Network ScanGear PING (Packet Internet Groper) Echo reply response 0 TCP NO PING (Packet Internet Groper) Echo reply response 7 TCP NO PING (Packet Internet Groper) Echo request 8 TCP NO RAW printing (generaly used by UNIX printing) 9100 TCP YES RDP (Remote Desktop Protocol) 3389 TCP RPC (Remote Procedure Call) Sun Unix 111 TCP/UDP RPC, DHCP Manager, Client / server Communications RUI (Remote User Interface( (Canon) / Web Tools (Fiery) YES SNMP (Simple Network Management Protocol) / Fiery get NO device status SNMP Trap (Simple Network Management Protocol) 162 UDP NO SSL (Secure Socket Layer) HTTPS (Hyper Text Transport 443 TCP/UDP YES Protocol (secure)) Telnet (default telnet port) 23 TCP/UDP NO Web Tools (Fiery) / RUI (Remote User Interface) (Canon) YES WINS (Windows Internet Naming Services) 42 TCP/UDP General functions and the ports that they may use (in alphabetical order) Browsing, NetBIOS over TCP/IP Client / Server communication 25, 110 TCP Get Device Status (Canon driver) 41380, 41376, TCP/UDP Login sequence LPR, printing Printer sharing (SMB protocol) 137, 138, 139 TCP RAW, printing 9100 TCP Standard TCP/IP printing (microsoft windows) 515, 9100 TCP SMB, printing and network browsing SQL Name Pipes encryption over other protocols name lookup 137 UDP SQL RPC encryption over other protocols name lookup SQL session SQL session SQL session mapper SQL TCP client name lookup (this port is DNS also used by 137 UDP 139 TCP 1433 TCP TCP AXIS 1610 / 1611 / 1650 ports and protocols (in alphabetical order) DHCP and BOOTP 67, 68 TCP FTP 21 TCP HTTP for EWS (Embedded Web Server)

3 SLP (Service Location Protocol) SNMP SNMP Traps TFTP WIMP, this port is used for discovery status and printing 427 UDP 162 UDP 69 TCP E-Copy SSOP ecopy Inbox Agent with scan to desktop. (optional for unencrypted UDP communication between ecopy Inbox Agent, ShareScan OP Service Mnager and the ecopy Desktop Clients) 8888, 9999 on multicast IP address Optional for encrypted UDP communication between ShareScan OP Service Manager and the MEAP device (if the ports are closed, you can use SNMP to detect the MEAP device) ShareScan OP Servive Manger, communication between ShareScan OP and the MEAP device. Used for communication between the ShareScan OP Administration Console and the ecopy Agent service. Used internally on the PC where the ShareScan OP Services Manager is running. Used internally on the PC where the ShareScan OP Services Manager is running. 8899, 9988 on multicast IP address , 9100 TCP/UDP YES 9010, 9101 YES 9200, TCP/IP ports that might be used with Canon office equipment (in numerical order) PING (Packet Internet Groper) Echo reply response 0 TCP PING (Packet Internet Groper) Echo reply response 7 TCP PING (Packet Internet Groper) Echo request 8 TCP FTP-DATA (File Transfer Protocol Data) 20 TCP FTP (File Transfer Protocol) 21 TCP Telnet (default telnet port) 23 TCP/UDP , SMTP (Simple Mail Transfer Protocol) Outgoing mail 25 TCP Domain Name request Domain Name reply WINS (Windows Internet Naming Services) DNS (Domain Name Server) client to server lookup DHCP Client (Dynamic Host Configuration Protocol) DHCP Server (Dynamic Host Configuration Protocol) RUI (Remote User Interface( (Canon) / Web Tools (Fiery) Web Tools (Fiery) / RUI (Remote User Interface) (Canon) Fiery WebTools , POP (Post Office Protocol) Incoming RPC (Remote Procedure Call) Sun Unix mail, IMAP (Internet Message Access Protocol), Canon does not support IMAP RPC, DHCP Manager, Client / server Communications NetBIOS Nameserver (used for SMB protocol and network browsing 37 TCP 38 TCP 42 TCP/UDP 67 TCP 68 TCP 110 TCP 111 TCP/UDP 113 TCP 137 TCP/UDP

4 NetBIOS Datagram (used for SMB protocol and network 138 UDP datagram responses) NetBIOS Session service (used for SMB protocol), DNS 139 TCP Administration Fiery Get Device Status SNMP (Simple Network Management Protocol) / Fiery get device status SNMP Trap (Simple Network Management Protocol) 162 UDP LDAP (Lightweight Directory Access Protocol) 389 TCP Device information Delivery (SLP Protocol) 427 TCP imageware Remote 443 TCP SSL (Secure Socket Layer) HTTPS (Hyper Text Transport 443 TCP/UDP Protocol (secure)) SMB when netbios is turn off 445 Hasp, TCP Net Hasp Server (Aladin Hasp software key) 475 TCP Fiery Downloader Fiery Scan LPR (Line Printer Remote) printing spooler / Fiery Scan / Fiery Downloader IPP printing (Internet Printing Protocol) 631 TCP LDAPS (Lightweight Directory Access Protocol Secure, LDAP 636 TCP w/ssl) RDP (Remote Desktop Protocol) 3389 TCP Canon Security Agent 5678 TCP VNC 5900 MEAP SMS 8000 TCP Job Monitor (Fiery) TCP e-copy SSOP (single sign on 9030 TCP YES RAW printing (generaly used by UNIX printing) 9100 TCP YES Command Workstation (CWS), Harmony, Bi-directional Driver 9906 UDP Axis Print server. This port is used to identify the status the axis print server. This is performed approx every 30 seconds and it communicates with any computer that has the Axis pordriver installed, even if the printer driver is not installed. CNSSS (Canon Netspot Suite Services), used when performing get device status performing get device status from a worksation printing through a print server to the Canon printer. Canon Network ScanGear, used when performing pull scaning from a computer. (Canon) Make sure that the NWSCAN setting in service mode is set to a 1, in Network Settings make sure that enable dedicated port is set to ON TCP 413 YES Cascade printing and Remote printing (Canon) performing get device status from a computer printing directly to the Canon printer. Get Device Status (Canon), make sure that dedicated port in Network Settings is turned ON, also see CNNSSS and DIAS for additional ports used when performing get device status from the Canon print

5 Network ScanGear, also see Canon Network ScanGear Canon Service Support Tool (when in service mode) TCP/UDP YES Command Workstation (CWS), Harmony, Bi-directional Driver TCP/UDP