Red-shade Phthalocyanine blue for water based inks and coatings and flexible
|
|
|
- Kory Heath
- 7 years ago
- Views:
Transcription
1 TRICOLITH BLUE BL DESCRIPTION: PVC. Red-shade Phthalocyanine blue for water based inks and coatings and flexible Chemical Character: Copper Phthalocyanine Blue (Alpha Crystal) Colour Index: Pigment Blue 15 C.I. Number: CAS Number: Density: 1.65 g/cm l/kg 72 ml/100g Soluble salts content: < 1% ph. 7 1
2 TRICOLITH ORANGE 2R DESCRIPTION: Clean and bright orange pigment with high tinting strength, good chemical resistance & good lightfastness. Suitable for most liquid systems. Chemical Character: Disazo Orange (Dianisidine) Colour Index: Pigment Orange 16 C.I. Number: CAS Number: Density: 1.3 g/cm l/kg 48 ml/100g Moisture content: < 1% ph
3 TRICOLITH YELLOW 10G DESCRIPTION: A very greenish Monoazo yellow pigment with outstanding fastness to light and weathering in the full shade and close to full shade. It has very good dispersibility and high tinctorial strength. Suitable for air drying paints and inks. Chemical Character: Monoazo Yellow Colour Index: Pigment Yellow 3 C.I. Number: CAS Number: Density: 1.6 g/cm 3 Specific area: 8 m 2 /g 5.6 l/kg 40 ml/100g 3
4 TRICOLITH VIOLET BLN DESCRIPTION: Carbazole violet with a reddish bright hue and high tinctorial strength. This high performance pigment offers excellent light, weathering and fastness properties. Several grades are available to suit formulations for inks, plastics, and coatings. Chemical Character: Dioxazine (Carbazole) Colour Index: Pigment Violet 23 C.I. Number: CAS Number: Density: 1.55 g/cm 3 Specific area: 82 m 2 /g 4.8 l/kg Ave. particle size: 0.14 µm 68 ml/100g ph. 5 4
5 TRICOLITH RED EBI DESCRIPTION: Naphthol red noteworthy for its high tinting strength as well for its depth of shade. Used in air drying paints and flexographic liquid inks where good fastness to solvents is required. Chemical Character: Monoazo Red (Naphthol AS) Colour Index: Pigment Red 12 C.I. Number: CAS Number: Density: 1.3 g/cm l/kg 72 ml/100g ph. 8 5
6 TRICOLITH YELLOW 155 Series DESCRIPTION: Very intense, bright, greenish yellow pigment with very good light and weather fastness, especially in full shades. Particularly recommended for lead free paints. Outstanding flow properties in printing inks. High heat stability. Available in three grades: transparent and opaque for liquid systems, and special for plastic applications. Chemical Character: Disazo Yellow Colour Index: Yellow 155 C.I. Number: CAS Number: Density: 1.40 g/cm 3 Specific area: 31.3 m 2 /g 5.0 l/kg Ave. particle size: 0.14 µm 67 ml/100g ph. 7 6
7 TRICOLITH BNP DESCRIPTION: Red-shade, Phthalocyanine blue, stabilized to prevent crystallization and flocculation. Recommended for industrial air and oven drying solvent paint- marine, anticorrosion, etc. Chemical Character: Copper Phthalocyanine Blue (Alpha Crystal- Stabilized) Colour Index: Pigment Blue 15:2 C.I. Number: CAS Number: Density: 1.5 g/cm 3 Specific area: 65 m 2 /g 72 ml/100g H 7 7
8 TRICOLITH ORANGE 2GN DESCRIPTION: A red-shade orange pigment. This pigment is available in a transparent grade and an opaque grade, suitable for matching lead-free colours. It maintains good rheology in high pigment to binder concentrations without deteriorating gloss. Limited exterior use. Chemical Character: Disazo Orange (Pyralozone) Colour Index: Pigment Orange 34 C.I. Number: CAS Number: Density: 1.3 g/cm 3 Specific area: 38 m 2 /g 5.9 l/kg Ave. particle size: 0.12 µm 30 ml/100g 8
9 TRICOLITH GREEN JS DESCRIPTION: A yellow-shade Phthalocyanine green pigment with excellent all-around fastness properties. Recommended for all applications. Chemical Character: Copper Phthalocyanine Green Colour Index: Pigment Green 7 C.I. Number: CAS Number: Density: 1.9 g/cm 3 Specific area: m 2 /g 3.2 l/kg 30 ml/100g 9
10 TRICOLITH YELLOW TWA DESCRIPTION: resistance. A strong and bright Diarylide type AAA yellow with moderate heat and solvent Chemical Character: Disazo Yellow (AAA) Colour Index: Pigment Yellow 12 C.I. Number: CAS Number: Density: 1.3 g/cm 3 5 l/kg 70 ml/100g ph
11 TRICOLITH PINK IMW-X DESCRIPTION: A clean shade Rhodamine (PMA) pigment with exceptional transparency and gloss. Used to match magentas for offset and water-based flexographic printing inks. Chemical Character: Rhodamine PMA Colour Index: Pigment Red 81:3 C.I. Number: 45161:2 CAS Number: Density: 1.8 g/cm 3 4 l/kg 54 ml/100g ph. 6 11
12 TRICOLITH BLUE TFR DESCRIPTION: Cobalt blue pigment with clean red shade, and outstanding fastness properties. Recommended for all types of plastics, coatings and inks where maximum resistance to light, heat and chemicals is required. Suitable for coloring lime, cement, ceramics and glass. Chemical Character: Cobalt Aluminate Blue Spinel Colour Index: Pigment Blue 28 C.I. Number: CAS Number: Density: 4.5 g/cm 3 Specific area: 12 m 2 /g 2.6 l/kg 30 ml/100g ph. 8 12
13 TRICOLITH ORANGE PET DESCRIPTION: Easy dispersible DNA orange pigment suitable for interior air-dry applications. Has low to moderate resistance to solvents. This pigment is available in a transparent grade and an opaque grade. Chemical Character: Monoazo Orange (Dinitroaniline-DNA) Colour Index: Pigment Orange 5 C.I. Number: CAS Number: Density: 1.5 g/cm l/kg 40 ml/100g Moisture content: < 2% Soluble salts content: < 1% ph
14 TRICOLITH YELLOW 3G DESCRIPTION: Green-shade Azo-condensation pigment especially recommended for plastics due to its high heat resistance. Also suitable for powder coatings due to its good resistance to amine curing agents. Excellent light, weather and solvent fastness. Suitable for all applications requiring high degree of fastness. Chemical Character: Condensed Azo Yellow Colour Index: Pigment Yellow 93 C.I. Number: CAS Number: Density: 1.45 g/cm 3 Specific area: 70 m 2 /g 5.2 l/kg 82 ml/100g 14
15 TRICOLITH ORANGE P DESCRIPTION: A bright red-shade orange offering high tinting strength, excellent chemical resistance, reasonable light fastness, and good heat stability. Specially recommended for lead-free industrial finishes. Chemical Character: Disazo Orange (Pyrazolone) Colour Index: Pigment Orange 13 C.I. Number: CAS Number: Density: 1.5 g/cm 3 55 ml/100g Moisture content: < 1.5% Soluble salts content: < 1.5% ph. 7 15
16 TRICOLITH YELLOW OSN DESCRIPTION: A green-shade Monoazo yellow pigment with good light and weather fastness. Recommended for aqueous paints and printing inks. Compared to other Monoazo yellows it is more resistant to re-crystallization. Similar in shade to PY-1 but has greater tinctorial strength, and is more transparent in full shade. Chemical Character: Monoazo Yellow Colour Index: Pigment Yellow 73 C.I. Number: CAS Number: Density: 1.49 g/cm 3 38 ml/100g Moisture content: < 2.5 % Soluble salts content: < 1.5 % 16
17 TRICOLITH ORANGE HQS DESCRIPTION: Very solvent resistant orange pigment with excellent fastness to light and weathering. Suitable for high end industrial coatings, inks and lead-free formulations. Chemical Character: Monoazo Orange (Benzimidazolone) Colour Index: Pigment Orange 36 C.I. Number: CAS Number: Density: 1.5 g/cm 3 58 ml/100g 17
18 TRICOLITH BLUE RBP DESCRIPTION: Red-shade, readily dispersible Phthalocyanine blue, stabilized to prevent crystallization. Stable to aromatics. Also noteworthy for its good flow properties and excellent performance in plastics. Chemical Character: Copper Phthalocyanine Blue (Alpha Crystal- Stabilized) Colour Index: Pigment Blue 15:1 C.I. Number: CAS Number: Density: 1.6 g/cm 3 Specific area: 70 m 2 /g Ave. particle size: 0.06 µm 75 ml/100g Moisture content: < 0.5% 18
19 TRICOLITH ORANGE HPO DESCRIPTION: A very clean and bright-red orange pigment with excellent durability and opacity. Recommended for paints, lacquers and printing inks. Chemical Character: Monoazo Orange Colour Index: Pigment Orange 74 C.I. Number: CAS Number: Density: 1.4 g/cm 3 Specific area: 19 m 2 /g 6.2 l/kg Ave. particle size: 0.23 µm 60 ml/100g ph
20 TRICOLITH GREEN 8G DESCRIPTION: Very distinct yellow-shade Phthalocyanine with very good dispersibility and flow, and outstanding fastness properties. Chemical Character: Chlorobrominated Copper Phthalocyanine Colour Index: Pigment Green 36 C.I. Number: CAS Number: Density: 2.9 g/cm 3 50 ml/100g Moisture content: < 1% ph
21 TRICOLITH RED CNR DESCRIPTION: Naphthol red with good gloss and high tinting strength. This pigment is suitable for most types of printing inks. Chemical Character: Monoazo Red (BON) Colour Index: Pigment Red 2 C.I. Number: CAS Number: Density: 1.5 g/cm 3 Specific area: 43 m 2 /g 4 l/kg 60 ml/100g 21
22 TRICOLITH RED TRM DESCRIPTION: Toluidine red pigment with very good fastness to light and weathering in full shade. Particularly suitable for air-drying paints and flexographic water-based printing inks. Chemical Character: Monoazo Red (Toluidine) Colour Index: Pigment Red 3 C.I. Number: CAS Number: Density: 1.4 g/cm 3 Specific area: 11 m 2 /g 7.5 l/kg 41 ml/100g ph. 7 22
23 TRICOLITH BLUE 15:4 Series DESCRIPTION: Green-shade Phthalocyanine blue in beta modification, stabilized to prevent crystallization and flocculation. Good dispersibility and rheological properties. Excellent weathering and overall resistance characteristics. Particularly recommended for solvent liquid inks, and high quality coatings. Chemical Character: Copper Phthalocyanine Blue (Beta Crystal- Stabilized) Colour Index: Pigment Blue 15:4 C.I. Number: CAS Number: Density: 1.6 g/cm 3 Specific area: 71 m 2 /g 4.1 l/kg Ave. particle size: 0.06 µm 42 ml/100g 23
24 TRICOLITH RED RO DESCRIPTION: Chlorinated para red pigment having good light fastness, suitable for air-drying paints and water-based flexographic inks. Chemical Character: Monoazo Red (β-naphthol) Colour Index: Pigment Red 4 C.I. Number: CAS Number: Density: 1.6 g/cm 3 Specific area: 12 m 2 /g 4.3 l/kg 79 ml/100g 24
25 TRICOLITH RED NR DESCRIPTION: and yellow shade. Brilliant and transparent fast red suitable for printing inks. Available in a blue Chemical Character: Monoazo Red (Naphthol) Colour Index: Pigment Red 22 C.I. Number: CAS Number: Density: 1.4 g/cm l/kg 50 ml/100g Moisture content: < 1 % Sieve residue 45 µm: < 1 % ph. 7 25
26 TRICOLITH RED 3RS DESCRIPTION: A very bright red with good all-round fastness properties. This pigment can be used for lithographic and liquid printing inks as well as metal printing, powder coatings, and plastics. Chemical Character: Monoazo Red (Barium toner of 2B acid) Colour Index: Pigment Red 48:1 C.I. Number: 15865:1 CAS Number: Density: 1.9 g/cm l/kg 44.6 ml/100g ph. 7 26
27 TRICOLITH BLUE 15:3 Series DESCRIPTION: A green-shade, non-crystallizing Phthalocyanine blue with excellent transparency, brightness, and tinting strength. Solvent and heat stable. Plastics, inks and coatings grades are available. Chemical Character: Phthalocyanine Blue (Beta Crystal/Noncrystallizing) Colour Index: Pigment Blue 15:3 C.I. Number: CAS Number: Density: 1.6 g/cm 3 Specific area: 66 m 2 /g Ave. particle size: 65 µm 68 ml/100g 27
28 TRICOLITH RUBINE RCP DESCRIPTION: A clean blue-shade rubine, (Calcium 2B toner) with high tictorial strength and good heat stability, suitable for inks, and plastics. Chemical Character: Monoazo Red (Calcium toner of 2B acid) Colour Index: Pigment Red 48:2 C.I. Number: 15865:2 CAS Number: Density: 1.6 g/cm 3 Specific area: 30 m 2 /g 3.5 l/kg Ave. particle size: 0.14 µm 58 ml/100g 28
29 TRICOLITH YELLOW 3RP DESCRIPTION: A red-shade yellow pigment with high tinctorial strength. This pigment is available in a transparent and an opaque grade. Suitable for all paint systems. Also suitable for matching lead-free shades for metallic paints and foil lacquers. Chemical Character: Disazo Yellow Colour Index: Pigment Yellow 83 C.I. Number: CAS Number: Density: 1.3 g/cm 3 Specific area: 46 m 2 /g 4.2 l/kg Ave. particle size: 0.06 µm 85 ml/100g ph. 6 29
30 TRICOLITH RED RGP DESCRIPTION: A brilliant red with high hiding power and very good rheological properties. Suitable for matching heavy metal-free red shades. Chemical Character: Monoazo Red (Strontium toner of 2B acid) Colour Index: Pigment Red 48:3 C.I. Number: 15865:3 CAS Number: Density: 1.8 g/cm 3 Specific area: 28 m 2 /g 4.8 l/kg 63 ml/100g 30
31 TRICOLITH YELLOW SFY DESCRIPTION: Compared to PY-1 it is a slightly greener and has higher tinctorial strength. Easy dispersible pigment for air-drying paints. It has very good fastness to light and weathering in full shade but moderate in tint levels. Its main use is for interior use. This pigment is offered in a transparent and an opaque grade. Chemical Character: Monoazo Yellow Colour Index: Pigment Yellow 74 C.I. Number: CAS Number: Density: 1.55 g/cm 3 5 l/kg 40 ml/100g ph
32 TRICOLITH RED PCS DESCRIPTION: Manganese 2B toner with very good all-round fastness properties. Suitable for paints, printing inks and plastics. Specially recommended for high quality lead-free industrial finishes. Chemical Character: Monoazo Red (Manganese toner of 2B acid) Colour Index: Pigment Red 48:4 C.I. Number: 15865:4 CAS Number: Density: 1.7 g/cm 3 Specific area: 41 m 2 /g 4 l/kg Ave. particle size: 0.09 µm 60 ml/100g ph. 7 32
33 TRICOLITH YELLOW GRP DESCRIPTION: A Disazo yellow pigment having very good all-round fastness properties, suitable for industrial finishes, powder coatings, general plastics, and inks. This pigment is offered in a transparent grade and an opaque grade. Chemical Character: Disazo Yellow Colour Index: Pigment Yellow 13 C.I. Number: CAS Number: Density: 1.38 g/cm 3 Specific area: 49 m 2 /g 55 ml/100g Moisture content: < 1% ph
34 TRICOLITH RED FTN DESCRIPTION: Lithol red with high tinting strength and depth of shade, generally applicable for water-based flexographic inks. Chemical Character: Monoazo Red (Barium Lithol) Colour Index: Pigment Red 49:1 C.I. Number: 15630:1 CAS Number: Density: 1.62 g/cm 3 Specific area: 45 m 2 /g ph
35 TRICOLITH RED PER DESCRIPTION: Calcium lithol red with superior tinting strength and depth of shade. Suitable for water-based flexographic inks and some plastics. Chemical Character: Monoazo Red (Calcium Lithol) Colour Index: Pigment Red 49:2 C.I. Number: CAS Number: Density: 1.4 g/cm l/kg 55 ml/100g ph
36 TRICOLITH GREEN GFN DESCRIPTION: A strong blue-shade Phthalocyanine green, which resists crystallization. It has good transparency, brightness, tinctorial strength and outstanding general fastness properties. Recommended in all applications. Chemical Character: Copper Phthalocyanine Green Colour Index: Pigment Green 7 C.I. Number: CAS Number: Density: 1.9 g/cm 3 Specific area: m 2 /g 3.2 l/kg 30 ml/100g 36
37 TRICOLITH RED RLC DESCRIPTION: Red lake C available in transparent and opaque grades. Suitable for plastics and all types of printing inks. Economic warm red with good all-round properties. Chemical Character: Monoazo Red (Barium Salt) Colour Index: Pigment Red 53:1 C.I. Number: CAS Number: Density: 1.68 g/cm 3 50 ml/100g Moisture content: < 1% Soluble salts content: < 1% ph. 7 37
38 TRICOLITH YELLOW IYP DESCRIPTION: Reddish shade yellow, easy dispersible pigment for air-drying paints. It has very good fastness to light and weathering in full shade but moderate in tint levels. Its main use is for aqueous interior paints and inks. Chemical Character: Monoazo Yellow Colour Index: Pigment Yellow 1 C.I. Number: CAS Number: Granules Density: 1.4 g/cm 3 Specific area: 16 m 2 /g 8.5 l/kg 45 ml/100g Moisture content: < 1% 38
39 TRICOLITH RUBINE 57:1Series DESCRIPTION: Bright lithol rubine available in various grades and shades, covering the specific requirements of the printing ink and plastic industries. Can be used in economical industrial finishes where lightfastness requirements are not stringent. Chemical Character: Monoazo Red (Calcium toner of 4B salt) Colour Index: Pigment Red 57:1 C.I. Number: 15850:1 CAS Number: Density: 1.48 g/cm 3 58 ml/100g Moisture content: < 1.5% ph. 7 39
40 TRICOLITH BLUE JCU DESCRIPTION: Milori (Prussian) blue has many uses due to its hue, high tinctorial value, good fastness properties and relatively low cost. Not recommended for alkaline systems. Principle uses in printing inks and paints. Useful to achieve shades of green with yellow mixtures. Chemical Character: Ferric Ferrocyanide (Iron, Milori Blue) Colour Index: Pigment Blue 27 C.I. Number: CAS Number: Dense Density: 1.8 g/cm 3 4 l/kg 52 ml/100g ph. 5 40
41 TRICOLITH RED RGF DESCRIPTION: Brilliant red pigment with high color strength and good lightfastness. Recommended for architectural and industrial coatings, and printing inks. Chemical Character: Monoazo Red (Naphthol AS) Colour Index: Pigment Red 112 C.I. Number: CAS Number: Density: 1.6 g/cm 3 Specific area: 37 m 2 /g 6.3 l/kg Ave. particle size: 0.12 µm 70 ml/100g ph
42 TRICOLITH MAGENTA G DESCRIPTION: A very clean and bright Quinacridone pigment offering outstanding lightfastness, excellent bleed and heat resistance. This high performance pigment is suitable for formulating all types of inks, plastics and coatings. Chemical Character: Quinacridone Magenta Colour Index: Pigment Red 122 C.I. Number: CAS Number: Density: 1.45 g/cm l/kg 70 ml/100g 42
43 TRICOLITH YELLOW LCY DESCRIPTION: traffic marking. A red-shade lightfast yellow for air-drying coatings including lead-free paint for Chemical Character: Monoazo Yellow Colour Index: Pigment Yellow 65 C.I. Number: CAS Number: Density: 1.4 g/cm 3 40 ml/100g Moisture content: < 3.0 % Soluble salts content: < 1.5 % 43
44 TRICOLITH RED BGSN DESCRIPTION: High performance bright red pigment with excellent fastness properties. Offers high colour value and good hiding power. Very good light and weathering fastness in dark shades and in combination with coloured inorganic pigments. Very heat stable. Suitable for all types of printing inks, coatings and plastics. Chemical Character: Disazo Red (Condensed Azo) Colour Index: Pigment Red 144 C.I. Number: CAS Number: Density: 1.5 g/cm 3 Specific area: 34 m 2 /g 6.3 l/kg 78 ml/100g 44
45 TRICOLITH YELLOW H4G DESCRIPTION: Relatively green-shade yellow with excellent weathering and light fastness properties. It maintains good rheology in high pigment to binder concentrations without deteriorating the gloss in paint. Note - inadequate in high alkali environments. Chemical Character: Monoazo Yellow Colour Index: Pigment Yellow 151 C.I. Number: CAS Number: Density: 1.5 g/cm 3 Specific area: 20 m 2 /g 3.4 l/kg 70 ml/100g Moisture content: < 1% 45
46 TRICOLITH RED FB DESCRIPTION: A bluish red pigment with very good fastness to solvents. Suitable for all types of printing inks, and for paints where high weathering resistance is not required. Chemical Character: Monoazo Red (Naphtol AS) Colour Index: Pigment Red 146 C.I. Number: CAS Number: Density: 1.5 g/cm l/kg 50 ml/100g Sieve residue 45 µm: < 1% Soluble salts content: < 1% ph. 7 46
47 TRICOLITH RED GSP DESCRIPTION: An azo condensation red pigment with a bright yellowish hue. Recommended where a high standard of fastness is required. Chemical Character: Monoazo Red (Azo condensation) Colour Index: Pigment Red 166 C.I. Number: CAS Number: Density: 1.50 g/cm 3 Specific area: 24 m 2 /g 4.9 l/kg 57 ml/100g ph. 7 47
48 TRICOLITH YELLOW RGP DESCRIPTION: Red-shade yellow pigment, with excellent heat stability and chemical resistance. Particularly recommended for colouring engineering plastics, e.g. ABS, PPO, and PP. Chemical Character: Azo Yellow (Calcium Lake) Colour Index: Pigment Yellow 183 C.I. Number: CAS Number: Density: 1.7 g/cm l/kg 48
49 TRICOLITH RED 3B DESCRIPTION: Red pigment with excellent fastness properties and purity of shade for high performance applications encompassing inks, plastics and paints. Two different types are available: AAB and 3B. Tricolith Red 3B is semi-opaque whereas Tricolith Red AAB is yellower and very transparent and particularly recommended for metallic automotive coatings. Chemical Character: Anthraquinone Red Colour Index: Pigment Red 177 C.I. Number: CAS Number: Density: 1.45 g/cm 3 Specific area: 98 m 2 /g 4.4 l/kg 65 ml/100g 49
50 TRICOLITH BLUE R DESCRIPTION: Bright, red-shade Anthraquinone pigment with very good weathering and excellent general fastness properties. A high performance pigment recommended primarily for high quality applications. Chemical Character: Anthraquinone (Indenthrone) Colour Index: Pigment Blue 60 C.I. Number: CAS Number: Density: 1.5 g/cm 3 Specific area: 52 m 2 /g 3 l/kg Ave. particle size: 0.08 µm 50 ml/100g ph
51 TRICOLITH MAGENTA GS DESCRIPTION: A very clean, bright and transparent Quinacridone red with outstanding lightfastness, excellent bleed and heat resistance. This high performance pigment is suitable for formulating all types of inks, plastics, and coatings. Chemical Character: Quinacridone Magenta B Colour Index: Pigment Red 202 C.I. Number: CAS Number: Density: 1.66 g/cm 3 Specific area: 70 m 2 /g 3.5 l/kg 68 ml/100g 51
52 TRICOLITH YELLOW VGP DESCRIPTION: A green-shade Diarylide yellow with superior tinting strength and with all-round fastness properties. Easy dispersible in inks, plastics and paints. Suitable for powder coatings. Chemical Character: Disazo Yellow Colour Index: Pigment Yellow 17 C.I. Number: CAS Number: Density: 1.5 g/cm 3 Specific area: 77 m 2 /g 6.6 l/kg Ave. particle size: 0.05 µm 68 ml/100g 52
53 TRICOLITH MAGENTA L5B DESCRIPTION: Permanent Carmine. Very brilliant bluish red pigment composed of insoluble monoazo, with good fastness to solvent and light. Chemical Character: Monoazo Red Colour Index: Pigment Red 238 C.I. Number: CAS Number: Density: 1.8 g/cm 3 25 ml/100g Soluble salts content: < 1 % ph
54 TRICOLITH YELLOW SY DESCRIPTION: Economical green-shade yellow with good heat stability, used mainly for coloring plastics, particularly in Diarylide-free formulations. In paint, recommended for baking enamels and powder coatings. Chemical Character: Monoazo (Ca) Yellow Colour Index: Pigment Yellow 61 C.I. Number: CAS Number: Density: 1.50 g/cm l/kg 46 ml/100g 54
55 TRICOLITH RED FJS DESCRIPTION: This mixed coupling pigment is a very bright red with good solvent fastness for general industrial finishes and inks and some plastics. Fastness to light and weathering is lower in white letdowns. Chemical Character: Monoazo Red (Naphthol AS) Colour Index: Pigment Red 210 C.I. Number: CAS Number: Density: 1.2 g/cm 3 Specific area: 47 m 2 /g 5.0 l/kg Ave. particle size: 0.11 µm 40 ml/100g ph
56 TRICOLITH YELLOW BRM DESCRIPTION: A green shade Diarylide yellow offering superior tinting strength compared to Arylide yellows. This pigment is offered in a transparent and an opaque grade. Chemical Character: Disazo Yellow Colour Index: Pigment Yellow 14 C.I. Number: CAS Number: Density: 1.5 g/cm l/kg 47 ml/100g ph
57 TRICOLITH RED 170 Series DESCRIPTION: A clean red pigment with good fastness to light and weathering particularly in full shade. Available in several grades ranging from blue to yellow shades. Suitable for all paint and ink systems. Chemical Character: Monoazo Red (Naphthol AS) Colour Index: Pigment Red 170 C.I. Number: CAS Number: Density: 1.4 g/cm 3 Specific area: 29 m 2 /g 7.6 l/kg 67 ml/100g ph
58 TRICOLITH YELLOW ST DESCRIPTION: Economical red-shade yellow with good heat stability, used mainly for coloring plastics, particularly in Diarylide-free formulations. In paint recommended for baking enamels and powder coatings. Chemical Character: Monoazo (Ca) Yellow Colour Index: Pigment Yellow 62 C.I. Number: CAS Number: Density: 1.56 g/cm l/kg 53 ml/100g 58
59 TRICOLITH MAGENTA BL DESCRIPTION: This Quinacridone pigment has a very strong reddish violet hue, and offers outstanding lightfastness, excellent bleed and heat resistance. It is suitable for formulating inks, plastics, and coatings. Chemical Character: Quinacridone Red (Zeta Crystal) Colour Index: Pigment Violet 19 C.I. Number: CAS Number: Density: 1.6 g/cm 3 Specific area: 62 m 2 /g 45 ml/100g 59
60 TRICOLITH VIOLET 4RL DESCRIPTION: This Quinacridone pigment has a clean medium-shade red hue, and offers outstanding lightfastness, excellent bleed and heat resistance. It is suitable for formulating inks, plastics, and coatings. Chemical Character: Quinacridone Red (Beta Crystal) Colour Index: Pigment Violet 19 C.I. Number: CAS Number: Density: 1.7 g/cm 3 Specific area: 65 m 2 /g 45 ml/100g 60
61 TRICOLITH YELLOW RSY DESCRIPTION: Red-shade Azo-condensation pigment especially recommended for plastics due to its high heat resistance. Also suitable for powder coatings due to its good resistance to amine curing agents. Excellent light, weather and solvent fastness. Suitable for all applications requiring high degree of fastness. Chemical Character: Condensed Azo Yellow Colour Index: Pigment Yellow 95 C.I. Number: CAS Number: Density: 1.4 g/cm 3 Specific area: 66 m 2 /g 4.8 l/kg 90 ml/100g 61
Organic Pigments. Azo Pigments
Organic Pigments Azo Pigments Holtint Fast Yellow G Yellow 1 Holtint Fast Yellow 10 G Yellow 3 Holtint Fast Yellow 5G Yellow 5 Holtint Diaryl Yellow DHG Yellow 12 Holtint Diaryl Yellow GR Yellow 13 Holtint
Product range. MACROLEX Gran Dyes in Polystyrene + 2.0 % TiO 2 (1/3 Standard Depth)
Product range MACROLEX Gran Dyes in Polystyrene + 2.0 % TiO 2 (1/3 Standard Depth) Dyes Dyestuff type Color Index Color Index Safety data Part I Part II sheet number MACROLEX Yellow 6G Gran Methine Solvent
Cobalt, indigo, royal, sapphire, ocean, electric, true... whatever you call it, we ve got your blue.
A L K A L I Cobalt, indigo, royal, sapphire, ocean, electric, true... whatever you call it, we ve got your blue. UNTONED TONED Pantone is a registered trademark of Pantone, Inc. With unparalleled strength,
Colorants for Plastics are our Playground PRODUCT STEWARDSHIP: ONE STEP AHEAD WITH CLARIANT
Colorants for Plastics are our Playground PRODUCT STEWARDSHIP: ONE STEP AHEAD WITH CLARIANT Public Colorants for plastics Business Unit Pigments 2 Public, Colorants for Plastics are our Playground Table
Important Notes Color
Important Notes Color Introduction A definition for color (MPI Glossary) The selective reflection of light waves in the visible spectrum. Materials that show specific absorption of light will appear the
Radiation Curable Components and Their use in Hard, Scratch Resistant Coating Applications
Radiation Curable Components and Their use in Hard, Scratch Resistant Coating Applications William Schaeffer Steven Tyson Indu Vappala Robert Kensicki Sartomer USA, LLC 502 Thomas Jones Way Exton, PA 19343
Technical Information DF30
Technical Information DF30 Performance Pigments and Colors Lead Free Onglaze Colours for Porcelain, Bone China, Vitreous China, Earthenware, and Enamel In this leaflet, Ferro presents SAMBA100, the next
Solutions for Digital Printing Product Selection Guide
Solutions for Digital Printing Table of contents Cinquasia, Cromophtal, Heliogen, Irgalite, Irgazin, and Paliotol pigments for solvent-based and UV curable ink jet inks page 4 Orasol dyes for solvent-based
TIGER Drylac U.S.A., Inc. 3855 Swenson Avenue St Charles, IL T 800 243 8148 F 877 926 8148 office.us@tiger-coatings.us www.tiger-coatings.
Product Data Sheet SERIES 69 - DRYZINC ZINC-RICH PRIMER (69/90500) Epoxy zinc-rich powder coating primer. Part of a two-coat TIGER Shield system. Designed to impart superior corrosion protection to steel
MATERIAL SAFETY DATA SHEET Utrecht Artists Acrylic Colors
MATERIAL SAFETY DATA SHEET Utrecht Artists Acrylic Colors MSDS 901.6 Date: April 30, 2012 Information: 800-223-9132 or: 609-409-8001 Section 1 Company and Product Identification Utrecht Art Supply 6 Corporate
MATERIAL SAFETY DATA SHEET Utrecht Studio Series Acrylic Paint. Product Line: Utrecht Studio Series Acrylic Paint (21 colors) (Container size: pint)
MATERIAL SAFETY DATA SHEET Utrecht Studio Series Acrylic Paint MSDS 912.1 Date: June 7, 2010 Information: 800-223-9132 or: 609-409-8001 Section 1 Company and Product Identification Utrecht Art Supply 6
Effetti innovativi e funzionali nel coating
Effetti innovativi e funzionali nel coating Merck Effect Pigments in evereday life Politecnico di Torino 13 Maggio 2014 Stefano Corrado - Account Manager Coatings Merck Spa Milano Introduction to Pigments
Raven and Conductex Products for Specialty Applications
Raven and Conductex Products for Specialty Applications e e FUNDAMENTAL PROPERTIES OF CARBON BLACK A carbon black s application performance is determined by its fundamental properties and the level of
Heat-stable pigments. For surface coatings
Heat-stable pigments For surface coatings 2 Iron oxide pigments with improved temperature resistance for surface coating applications The pigments of the Colortherm and Bayferrox T ranges have been specially
MATERIAL SAFETY DATA SHEET Utrecht Artists Acrylic Colors
MATERIAL SAFETY DATA SHEET Utrecht Artists Acrylic Colors MSDS 901.4 Date: June 7, 2010 Information: 800-223-9132 or: 609-409-8002 Section 1 Company and Product Identification Utrecht Art Supply 6 Corporate
family of products is really Reichhold s answer to the growing need to meet more stringent regulations and performance requirements.
Alkyd performance. Water cleanup. Beckosol AQ is a new platform of low VOC alkyd latex resins made from renewable resources. We take conventional alkyd chemistry and emulsify it in water to deliver a unique
Drylac POWDER COATINGS
Drylac POWDER COATINGS Special Effects Volume 6 green coating A GREENER FINISH. FOR A BETTER WORLD. Replacing boredom and dullness with Special Effects oomph and vivacity Special Effects color chart exhibits
THE NEW GENERATION COLOURANT SYSTEM
THE NEW GENERATION COLOURANT SYSTEM Balanced System INDEX Mastermix System Balanced System Universal System Binder System Balanced System Mastermix Basecoat Technology Colour Documentation & Software Touch
CHAMELEON THERMOCHROMIC UV FLEXO INK
LCR Hallcrest Ltd. Riverside Buildings, Dock Road, Connah s Quay, Flintshire, CH5 4DS U.K. Tel: +44 (0)1244 817107 Fax: +44 (0)1244 818502 Email: sales@lcrhallcrest.com Web: www.lcrhallcrest.com Advanced
Pantone Matching System Color Chart PMS Colors Used For Printing
Pantone Matching System Color Chart PMS Colors Used For Printing Use this guide to assist your color selection and specification process. This chart is a reference guide only. Pantone colors on computer
Inorganic pigments. using the Laux process
Inorganic pigments using the Laux process 2 The LANXESS pigments business has been committed for many years to sustainable production processes as one of its core competencies. The Laux process in Krefeld-Uerdingen
Summit Racing Equipment s Paint and Auto Refinishing System was developed specifically for the home enthusiast and small shop owner wanting a
Summit Racing Equipment s Paint and Auto Refinishing System was developed specifically for the home enthusiast and small shop owner wanting a professional-looking paint job for hundreds of dollars less
How To Color Print
Pantone Matching System Color Chart PMS Colors Used For Printing Use this guide to assist your color selection and specification process. This chart is a reference guide only. Pantone colors on computer
THE BASICS OF COLOUR THEORY
HUE: VALUE: THE BASICS OF COLOUR THEORY Hue is another word for colour, such as blue, red, yellow-green Distinguishes between the lightness (tint) and darkness (shade) of Colours. (TONE) CHROMA: The vibrancy
ACID START-UP FOR POOL BUILDERS & SERVICE PROFESSIONALS
ACID START-UP FOR POOL BUILDERS & SERVICE PROFESSIONALS CONTENTS / INTRODUCTION INTRO 1 NEW PLASTER START-UP 2 COLOR PLASTER 4 FIBERGLASS POOL/SPA START-UP 6 VINYL POOL START-UP 8 COLOR & WHITE POOL PLASTER
The Anatomy of a Label
The Anatomy of a Label Three key elements make up a label: face stock, release liner, and adhesive. Face Stock: Face stock is the material of the label that carries the imprint. The print can be applied
Basic Properties and Application of Auto Enamels
Basic Properties and Application of Auto Enamels Composition of Ceramic Automotive Glass Enamels Ceramic automotive glass colours are glass enamels that fire on to the glass during the bending process
INDEPENDENTS AIL RET 2012
RETAIL INDEPENDENTS 2012 Contents Introducing 2 new colours to the Hammerite range: Direct To Rust Metal Paint 4-5 Metalcare - Task Specific Products 6-7 Metalcare - Primers & Converters 8-9 Muted Clay
MARTIN TESTING LABORATORIES (MTL) PAINTS AND COATINGS TESTING CAPABILITIES
Liquid Coating Properties Composition VOC Content, ASTM D2369 Water Content, ASTM D4017 Physical Properties Calculating Physical Constants of Coatings, ASTM D5201 Density, ASTM D1475 Flash Point, ASTM
Prussian blue and cyanotype printing
CHEM 101lab, fall 2008, J. Peters and cyanotype printing Ferric ferrocyanide, commonly known as, was first synthesized in 1704 in Berlin. has a very intense dark blue color and has been used extensively
Pantone Color Chart Plexiglas Cross Reference
Pantone Color Chart Plexiglas Cross Reference T = Transparent, TL = Translucent, O = Opaque Pantone Color Type Plexiglas Number Pantone Color 288 PMS 288 Type Plexiglas Number Pantone Color 485 C2X PMS
Paint it cool! Pigments for solar heat management in paints
Paint it cool! Pigments for solar heat management in paints Reflection instead of absorption keeps the coated surface cool Of 1 % solar radiation, % are absorbed at the earth s surface. Absorption 25 %
DIN 2403 Identification of pipelines according to the fluid conveyed. Marking of pipes according to fluid transported
DIN 2403 Identification of pipelines according to the fluid conveyed. Marking of pipes according to fluid transported 1 Field of application This standard specifies the colours for the identification of
EUDRAGIT E 100, EUDRAGIT E PO and
Technical Information EUDRAGIT E 100, and Specification and Test Methods Ph. Eur. USP/NF JPE Basic Butylated Methacrylate Copolymer Amino Methacrylate Copolymer - NF Aminoalkyl Methacrylate Copolymer E
Your Guide to Using Bayferrox Pigments to Color Concrete Products
Your Guide to Using Bayferrox Pigments to Color Concrete Products LANXESS Corporation was formed when the Bayer Group combined most of its chemicals businesses with large segments of its polymers activities.
The Anatomy of a Toner
The Anatomy of a Toner Toner is a very familiar material to most people who have worked in the printer and copier industries, as well as to anyone who has worked in a business no matter how large or small.
Spandrel Glass Types and Recommendations
Spandrel Glass Types and Recommendations Introduction PPG has long offered recommendations regarding alternatives for glass spandrel applications. Over the years these recommendations were included in
Dyes. Applications, Properties And Equipment
Dyes Applications, Properties And Equipment Definition of Dyeing The application of color to the whole body of a textile material with some degree of fastness. Natural Dyes Cochineal Tyrian Purple Madder
Test Methods for the Colour Fastness of Leather & Dyes. TFL Leather Technology Ltd. Quality and Environment February 2004 Version 1.
Test s for the Colour Fastness of Leather & Dyes TFL Leather Technology Ltd. Quality and Environment February 2004 Version 1.0 Contents Colour Fastness of Dyed Leather 1. Grey scale for assessing change
RHOPLEX SG-10M 100% Acrylic Emulsion For Interior/Exterior Semigloss Latex Paints
RHOPLEX SG-10M 100% Acrylic Emulsion For Interior/Exterior Semigloss Latex Paints Description RHOPLEX SG-10M emulsion is a versatile 100% acrylic copolymer that was designed for use in high-quality interior/exterior
Flame Tests & Electron Configuration
Flame Tests & Electron Configuration INTRODUCTION Many elements produce colors in the flame when heated. The origin of this phenomenon lies in the arrangement, or configuration of the electrons in the
P E T E R G R E V E N
PETER GREVEN PETER GREVEN The Peter Greven Company has been producing and developing metallic soaps, lubricants and special stabilizers for both the plastics industry and stabilizer manufacturers for many
Water Softening for Hardness Removal. Hardness in Water. Methods of Removing Hardness 5/1/15. WTRG18 Water Softening and Hardness
Water Softening for Removal 1 in Water High concentration of calcium (Ca2+) and magnesium (Mg2+) ions in water cause hardness Generally, water containing more than 100 mg/l of hardness expressed as calcium
Anodizing Reference Guide
Anodizing Reference Guide Type Thickness Type II Conventional coatings produced 1.8µ-25.4µ from sulfuric acid bath Type I A Conventional coatings produced 0.5µ-7.6µ (microns) from chromic acid bath Type
SOCAL UP. Innovative High Performance Precipitated Calcium Carbonate for Emulsion Paints. PCC Division Solvay Special Chemicals
SOCAL UP Innovative High Performance Precipitated Calcium Carbonate for Emulsion Paints PCC Division Solvay Special Chemicals Socal UP benefits in Emulsion paints Up to 60 % TiO 2 substitution (1 : 1)
Lumogen F. Technical Information. Collector dyes. Colorants and Graphic Systems. TI/P 3201 e (9125) November 1997
Technical Information Lumogen F TI/P 3201 e (9125) November 1997 = Registered trademark of BASF Aktiengesellschaft Collector dyes Colorants and Graphic Systems Lumogen F The ability of fluorescent dyes
ANNEX IV PART 1 LIST OF COLOURING AGENTS ALLOWED FOR USE IN COSMETIC PRODUCTS (1)
ANNEX IV PART 1 LIST OF COLOURING AGENTS ALLOWED FOR USE IN COSMETIC PRODUCTS (1) Column 1: Column 2: Column 3: Column 4: ing agents allowed in all cosmetic products ing agents allowed in all cosmetic
SECTION 33 12 19 FIRE HYDRANTS
SECTION 33 12 19 FIRE HYDRANTS PART 1: GENERAL 1.01 SCOPE A. Fire hydrants. B. Adjustment of fire hydrants and gate valves. 1.02 SUBMITTALS A. Conform to requirements of Section 01 33 00 - Submittals.
Ultracolor CG2. Fast setting and drying grout for 2 to 20 mm joints, available in 26 colours; does not produce efflorescence
IN COMPLIANCE WITH EUROPEAN STANDARDS Ultracolor CG2 CEMENTITIOUS GROUT Fast setting and drying grout for 2 to 20 mm joints, available in 26 colours; does not produce efflorescence WHERE TO USE Interior
OMG Borchers. Driers and Catalysts. Cobalt Replacement Driers Catalysts
OMG Borchers Driers and Catalysts Cobalt Replacement Driers Catalysts COBALT REPLACEMENT OMG Borchers Product Borchi OXY Metal content [%] / Metal Description / Solvent Borchi OXY - Coat is Borchers patented
COATED CARBIDE. TiN. Al 2 O 3
COATED CARBIDE GENERAL INFORMATION CVD = Chemical Vapour Deposition coated grades GC2015, GC2025, GC2135, GC235, GC3005, GC3015, GC3020, GC3025, GC3115, GC4015, GC4025, GC4035, S05F, and CD1810. PVD =
It's in the details. JOST MINERAL GUIDE
It's in the details. JOST MINERAL GUIDE Reference Guide to Jost Mineral Compounds Jost Chemical Co. manufactures a line of mineral compounds that are used in the nutritional supplement, clinical nutrition,
Chapter Two Types of Cement The properties of cement during hydration vary according to:
Chapter Two Types of Cement The properties of cement during hydration vary according to: Chemical composition Degree of fineness It is possible to manufacture different types of cement by changing the
POLYVINYL ALCOHOL. SYNONYMS Vinyl alcohol polymer, PVOH, INS No. 1203 DEFINITION DESCRIPTION FUNCTIONAL USES CHARACTERISTICS
POLYVINYL ALCOHOL Prepared at the 68 th JECFA (2007) and published in FAO JECFA Monographs 4 (2007), superseding specifications prepared at the 63 rd JECFA (2004) and published in the Combined Compendium
SODIUM CARBOXYMETHYL CELLULOSE
SODIUM CARBOXYMETHYL CELLULOSE Prepared at the 28th JECFA (1984), published in FNP 31/2 (1984) and in FNP 52 (1992). Metals and arsenic specifications revised at the 55 th JECFA (2000). An ADI not specified
External Paint Finshes & Colours
External Paint Finshes & Colours SPG BH note 2 What is an SPG? A Supplementary Planning Guidance Note (SPG) is one of the material considerations that can be taken into account when determining a planning
WHAT IS IN FERTILIZER OTHER THAN NUTRIENTS?
WHAT IS IN FERTILIZER OTHER THAN NUTRIENTS? Raymond C. Ward Ward Laboratories Inc. Kearney, NE Commercial fertilizer is a source of plant nutrients that can be applied to soil to nourish crops when the
Chapter 16: Tests for ions and gases
The position of hydrogen in the reactivity series Hydrogen, although not a metal, is included in the reactivity series because it, like metals, can be displaced from aqueous solution, only this time the
A World-class Leading Company in Inkjet Applications INKTEC INK REPORT
A World-class Leading Company in Inkjet Applications InkTec Co., Ltd. 1124, Shingil-dong Danwon-gu Ansan-city Kyungki-do, 425-839, Korea Tel: +82-31-493-7388 Fax: +82-31-492-2041 www.inktec.com All brand
Colours to stand the test of time. paint range
Colours to stand the test of time paint range The range A full range of products to make your machine look as good as new. A wide selection of colours for agriculture and construction equipment, for the
Cutting-edge dispersing agents for natural colors. Efka dispersing agents for digital printing
Cutting-edge dispersing agents for natural colors EDC_4311_e_R_Efka_DispAg_Vers1.indd 2 2 More ways to achieve more with inkjet printing With a new generation of dispersing agents, ASF now introduces the
Wax - AW1. For flat-head printers. Available for. Characteristics. Specifications
Wax - AW1 For flat-head printers AW1 is a wax quality ribbon developed for, and best suited to, general purpose label printing, offering heat resistance up to 60ºC (140ºF). This product provides good,
1. Three-Color Light. Introduction to Three-Color Light. Chapter 1. Adding Color Pigments. Difference Between Pigments and Light. Adding Color Light
1. Three-Color Light Chapter 1 Introduction to Three-Color Light Many of us were taught at a young age that the primary colors are red, yellow, and blue. Our early experiences with color mixing were blending
OXIDATION-REDUCTION TITRATIONS-Permanganometry
Experiment No. Date OXIDATION-REDUCTION TITRATIONS-Permanganometry INTRODUCTION Potassium permanganate, KMnO 4, is probably the most widely used of all volumetric oxidizing agents. It is a powerful oxidant
Accessories and labeling tools for the ICDMS Plotter
for the ICDMS Plotter We offer two basic plotter pens for a clear and easy to read labeling with our plotter systems. Depending on your application need, you can choose between a multiple use pen and a
Ringing (Sealing) a microscope slide and a comparison of ringing cements. plc@badice.co.uk
Ringing (Sealing) a microscope slide and a comparison of ringing cements plc@badice.co.uk January 25, 2013 Abstract Ringing a microscope slide improves its appearance as well as increasing its durability.
Tabla de conversión Pantone a NCS (Natural Color System)
Tabla de conversión Pantone a NCS (Natural Color System) PANTONE NCS (más parecido) PANTONE NCS (más parecido) Pantone Yellow C NCS 0580-Y Pantone 3985C NCS 3060-G80Y Pantone Yellow U NCS 0580-Y Pantone
Opaque Water Colour. English
Opaque Water Colour English Winsor & Newton have been producing Designers Gouache since 1935 and to this day we continue to offer the finest artists gouache range available, using the highest quality materials
BRILLIANT TONER SERIES TONERS FOR PRINTING INKS BSTS SERIES
BRILLIANT TONER SERIES TONERS FOR PRINTING INKS BSTS SERIES Brilliant fluorescent soluble toners are high-strength, transparent colorants. They are suitable for flexographic and gravure printing inks used
Munsell Soil Color. Munsell Gradient No. Code
Munsell Gradient No. Munsell Soil Color Code Munsell Soil Color Description 10.0 10R 2.5/1 Reddish Black 10.0 10R 2.5/2 Very Dusky Red 10.0 10R 3/1 Dark Reddish 10.0 10R 3/2 Dusky Red 10.0 10R 3/3 Dusky
Electroluminescent Materials
Electroluminescent Materials Electroluminescent Materials Overview. Product Range. GEM s products are based on a unique curing process that results in the low temperature formation of a thermosetting polymer
Name Class Date. spectrum. White is not a color, but is a combination of all colors. Black is not a color; it is the absence of all light.
Exercises 28.1 The Spectrum (pages 555 556) 1. Isaac Newton was the first person to do a systematic study of color. 2. Circle the letter of each statement that is true about Newton s study of color. a.
Laser, Copy, Inkjet Labels A4
LABELS Laser, Copy, Inkjet Labels A4 Versatile labels for laser and inkjet printers as well as for copiers. Problem free processing is ensured due to compatibility to all commercially available printers.
Decoration of enamelled surfaces based on inkjet technology Introduction Screen printing: Decals: Padprinting: Others: Picture 1
Introduction Decoration of enamelled surfaces based on inkjet technology Angelo Sole Colorobbia Italia S.p.A. e-mail: solea@colorobbia.it Giampaolo Lolli Colorobbia Italia S.p.A. e-mail: pelaboratory@colorobbia.it
Simplify your palette
Simplify your palette ou can create most any spectrum color with a simple six color palette. And, an infinity of tones and shades you ll make by mixing grays and black with your colors... plus color tints
Material Safety Data Sheet
Product Name: CRAYOLA(R) CRAYONS Product Family: 1. Chemical Product and Company Identification Material Safety Data Sheet BINNEY & SMITH EMERGENCY TELEPHONE NUMBER: 1100 CHURCH LANE 1-800-535-5053 EASTON,
Perfecting the Fine Art of Water Colours
Perfecting the Fine Art of Water Colours 1. ntroduction Since 1832 when Henry Newton and William Winsor introduced the first moist water colours to the world, much of our reputation for supreme quality
Printing technics. Flexo printing. Gravure printing. Offset printing
Printing technics Flexo printing Gravure printing Offset printing Flexographic Rubber roll technics Anilox roller Negative and positive doctor blades Advantage Better control over the ink transport Flexographic
01 - Plastic Pipe Cements and Primers
01 - Plastic Pipe Cements and Primers Q - What is the shelf life of the cement and primers? PVC & ABS Cements / Primers and Cleaners have 3 year shelf life from date of manufacture, and CPVC has 2 year
RBS detergents for laboratories
RBS detergents for laboratories High performance solutions For reliable and reproducible results Competence & experience RBS products are mainly intended for water-based cleaning processes of glassware
Plastisol vs. Water-based Ink for Textile Printing by Mike Ukena
Plastisol vs. Water-based Ink for Textile Printing by Mike Ukena There are two main types of ink that are used for textile printing. Water-based ink utilizes either dyes or pigments in a suspension with
Concrete Resurfacing. System Guide. by Parchem Construction Supplies
Concrete Resurfacing System Guide by Parchem Construction Supplies Resurfacing Spray-on resurfacing is a 2-3mm topping applied to structurally sound concrete surfaces that are at least 28 days old. Resurfacing
PRINTING INK TECHNOLOGY AND MANUFACTURE
PRITIG IK TEHLGY AD MAUFATURE Printing is widely used in our society to pass on information and to decorate objects. This has resulted in printing being used on many different surfaces ranging from aluminium
PARALOID KM-1 Acrylic Impact Modifier
Technical Data Sheet PARALOID KM-1 Acrylic Impact Modifier For Weatherable Vinyl Building Applications Regional Product Availability Description Europe PARALOID KM-1 Acrylic Impact Modifier belongs to
Drylac * ** anodized effect. anodized effect. anodized effect Light Bronze 61/78002. anodized effect Bronze 61/68002
Drylac Light Bronze 61/78002 Medium Clear 61/00015 Bronze 61/68002 Dark Champagne Bronze 61/68001 61/78003 Black 61/80079 candy anodized transparent effect Carina Light Bronze 49/06001 61/78002 candy anodized
Challenges and. Opportunities of. Digital Printing. Andreas Koch Managing Director Digital Division
Challenges and Opportunities of Digital Printing Andreas Koch Managing Director Digital Division Contents Why digital printing? The Marabu way Ink technologies Case study 2 Why digital printing? You can
Newfoundland and Labrador Paint Recycling Program Guidelines
Newfoundland and Labrador Paint Recycling Program Guidelines 2009Mar25 1 1. INTRODUCTION The Guidelines are intended to provide practical guidance to operators who are participating in the Newfoundland
Color makes the difference. Puricolor and Iragon pigments and dyes for home and personal care products
Color makes the difference and Iragon pigments and dyes for home and personal care products 2 3 Visual brand and claim support With today s sophisticated formulations and transparent packaging, it has
ITEM NO. DESCRIPTION BIDDER CODE NO. UNIT COST UNIT COST 1 GALLON 5 GALLON. 1 Oil Base Exterior House Paint Mobille Paint 5-18 $29.
BID ON: PAINT AND SUPPLIES BID NO: 13-22 OPENED: MARCH 1, 2013 @ 2:00 PM 1 Oil Base Exterior House Paint Mobille Paint 5-18 $29.00 XXX Acrylic Latex Exterior Gloss House Paint 2 Super White Sherwin Williams
A Narrative Summary of ASTM International Standards Pertaining to Artists Coloring Materials
A Narrative Summary of ASTM International Standards Pertaining to Artists Coloring Materials PURPOSE OF ASTM D01.57 ASTM D01.57, the Subcommittee on Artists' Materials, helps artists and consumers recognize
FLEXO AND GRAVURE PRINTING INKS AND VARNISHES SOLVENT BASED FLEXO AND GRAVURE PRINTING INKS AND VARNISHES
FLEXO AND GRAVURE PRINTING INKS AND VARNISHES The production of gravure and flexo printing inks at Cinkarna started in 1963 is a milestone in the production of printing inks in Cinkarna Celje. Our main
Protecting your assets from the first mile to the last
AXALTA COATING SYSTEMS Protecting your assets from the first mile to the last Commercial Transportation Axalta has built a legacy of coatings expertise for more than 145 years Axalta Coating Systems is
Scotch-Brite Cleaning and Scouring Pads
Scotch-Brite Cleaning and Scouring Pads The complete selection of cleaning pads for every surface 3Innovation Heavy Duty Cleaning at Work! Ideal for removing heavily encrusted soil or grime. Scotch-Brite
VULCOFAC TAIC-70 O N O . N CAS : 1025 15 6. N EINECS : 213 834 7. . Main function :. Crosslinking agent for peroxide cure elastomers
- Composition :. Active ingredient :. Triallyl isocyanurate. Formula : ( C12 H15 N3 O3 ) O N O N N O. N CAS : 1025 15 6. N EINECS : 213 834 7 - Supplier :. Origin : Safic-Alcan UK. Availability : regularly
Kemet DIAMOND PRODUCTS
Kemet DIAMOND PRODUCTS Kemet Diamond Products Since 1938, Kemet has been at the forefront of precision polishing technology, producing quality diamond pastes, slurries and composite lapping/polishing materials
Painting Clean-up Procedures
Painting Painting Clean-up Procedures Sinks are for hand washing ONLY. Follow the instructions below for cleaning brushes and tools. Do not use restrooms for cleaning art materials or supplies. Brush Cleaning:
ACUSOL 820 Rheology Modifier and Stabilizer
ACUSOL 820 Rheology Modifier and Stabilizer Description ACUSOL 820 is a Hydrophobically modified Alkali Soluble acrylic polymer Emulsion (HASE) with unusually high aqueous thickening and stabilising efficiency.
Classification of Chemical Substances
Classification of Chemical Substances INTRODUCTION: Depending on the kind of bonding present in a chemical substance, the substance may be called ionic, molecular or metallic. In a solid ionic compound
PANTONE Coated Color Reference
Coated The color names and numbers displayed in this book represent names and numbers from its copyrighted MATCHING SYSTEM Color names have been abbreviated to save space. This chart shows solid name within
New Refractory Technology Provides Advantages in Monolithic Refractories
New Refractory Technology Provides Advantages in Monolithic Refractories There have been a number of different refractory binder systems introduced and utilized over the last 100 years. The most long-standing