PROJECT PROFILE PACKAGED DRINKING WATER / MINERAL WATER
|
|
|
- Georgiana Harrison
- 9 years ago
- Views:
Transcription
1 PROJECT PROFILE ON PACKAGED DRINKING WATER / MINERAL WATER NAME OF THE PRODUCT : Packaged Drinking Water / Mineral Water. PRODUCT CODE : QUALITY & STANDARD : PFA Regulations and ISI 4543:1998. PRODUCTION CAPACITY : Quantity - 12 Lakhs Bottles (1 Litre) (Per Annum) Value - Rs Lakhs. MONTH & YEAR OF : February, PREPARATION PREPARED BY : P. K. SRIVASTAVA, Asstt. Director (Food) MSME - Development Institute, Ministry of Micro, Small & Medium Enterprises, Government of India 107, Industrial Estate, Kalpi Road, Kanpur Tele , & (EPBAX) Tele. No (SENET & TRC) Tele/Fax No.: [email protected] Website: msmedikanpur.gov.in
2 1 PROJECT PROFILE ON Packaged Drinking Water/Mineral Water A) INTRODUCTION It is needless to mention that water, a compound of hydrogen and oxygen is a precious natural gift which is very essential for survival of mankind including animals. The water used for portable purposes should be free from undesirable impurities. The water available from untreated sources such as Well, Boreholes and Spring is generally not hygienic and safe for drinking. Thus it is a desirable and necessary to purify the water and supply under hygienic conditions for human drinking purpose as the name implies. The mineral water is the purified water fortified with requisite amounts of minerals such as barium, iron, manganese etc., which can absorbed by human body. It is either obtained from natural resources like spring and drilled wells or it is fortified artificially by blending and treating with mineral salts. The mineral water shall be manufactured and packed under hygienic conditions sin properly washed and cleaned bottles in sterilized conditions. B) MARKET POTENTIAL Unfortunately sufficient safe portable water is not available everywhere in the country, either harmful chemical substances are found in the layers of earth which enter in to water or it may be contaminated due to pathogenic micro-organisms. If such water is consumed, the body suffers from water born diseases. Due to this, it has become imperative to process and bottle safe portable water for the mankind in prevailing
3 2 conditions. The demand for purified water becomes more during summer season. Although few companies have already entered in the bottling of safe portable water and mineralized water, but still huge gap is there in between demand and supply at all metropolitan cities and towns. The product is widely accepted in offices, restaurants, railway stations, airport, but stands, hospitals and to some extent in rich house-holds. So there is good scope for establishing the units for processing and bottling plain and mineralized drinking water in different parts of the country. C) BASIS & PRESUMPTIONS I. This project is based on single shift basis and 300 working days in a year. II. III. The cost of machinery & equipment /materials indicated refer to a particular make and the prices are approximate to these prevailing at the time of preparation of this profile. The cost of packaging, forwarding tax etc and installation electrification of machinery is 15% non-refundable deposits, project cost, trial production, fees etc are considered under pre-operative expenses. IV. Depreciation has been taken as an a) On 5% b) On machinery & 10% c) On office furniture & 20% V. Interest on total capital investment has been 14% per annum. VI. VII. VIII. IX. Minimum 40% of the total investment is required as margin money. Pay back period of the project will be 7 years, with half yearly installments. Break even point has been calculated at the full capacity utilization. For smooth functioning of unit it is suggested that unit should have a good stock of quality raw material
4 3 D) IMPLEMENTATION SCHEDULE: The following steps involves in the implementation of the project. Sl. No. Activity I. Selection of Site. II. III. IV. Form of Ownership. Feasibility Report. Entrepreneurship Memorandum V. Arrangement of Finance VI. VII. VIII. IX. Construction of Factory Shed & Building Plant Erection and Electrification Recruitment of Manpower Arrangement of raw materials including packaging materials. X. Selection of marketing channel. XI. Miscellaneous power and water connection, Pollution Control Board clearance etc. Normally 1 year is required to implement the project. E) TECHNICAL ASPECTS: (i) Process of Manufacture: Raw water to be processed is collected in tanks. A known quantity is pumped in to the above tank where the water is dozed with alum for coagulation with heavy metals or insoluble matters. The water after coagulation is allowed to settle for an hour. The impurities may be removed by reserved osmosis techniques also. The supernatant water is taken to the chlorination tank where primary disinfection is brought about by bubbling chlorine gas. The water is then passed through sand filters for trapping of undissolved impurities. The water after sand filteration is passed through carbon filters for removal of odour, colour and also for dechlorination. It is then passed through series of micro fillers comprising
5 4 5 micron, 1 micron and 0.4 micron filter followed by ultraviolet disinfection system for terminal disinfection. Packing is done in PET bottles of 1 litre capacity through an automatic rinsing, filling and capping machine fitted with an ozone generator. The bottle after capping are shrink wrapped (optical) and packed in corrugated boxes of one dozen each. (ii) Quality Control and Standards: The plain drinking water has to be bottled in pet bottle as per IS:14543:1998. (iii) Motive Power: 50 HP (iv) Production Capacity (Per Annum): Quantity: : 12 lakh bottles (1 Litre) Per Annum Value : Rs Lakhs (v) Pollution Control: The unit will not create any pollution problems. However, entrepreneur should obtain NOC from concerned State Pollution Control Board. (vi) Energy Conservation: Suitable measures should be adopted to use electricity
6 5 F) FINANCIAL ASPECTS: A) Fixed Capital: (i) Land & Building: Area 1. Land Total covered area required for filtration 500 sq. sq. mtr. 2. Building Raw Material Storage, Packaging Material Storage, Machinery, Spare parts, Store Finished Goods, Office, Quality Control Lab. Toilet, electrical Switch Room and misc. 400 sq. 5000/sq. mtr. Amount (Rs. In lakh) 3.00 lakhs lakhs 3. Boundary Wall and Civil work on gate etc lakh Total: lakhs (ii) Machinery & Equipment: Sl. No Particulars of Machines Qty. (Nos.) Amount (Rs. lakh) 1. Sand Filter Chlorination Tanks made of S. Steel with Electronic Doser Alum Treatment Tanks with Electronic Doser Activated Carbon Filter Reverse Osmosis Plant 2000 Lit Micron Filters Ultra violet Disinfectant System Ozone Generator Raw and purified water collection tanks with motor & accessories 10. Automatic Rinsing Filling and Capping Machine Shrink Wrapping Machine for Bottle Miscellaneous Tools & Equipments, Pipeline etc. Plastic Crates etc. 13. Laboratory Testing and Quality Control, Micro-Biological 2.00 Instruments etc. Total: Electrification and installation of Plant & 3.15 Machinery. Total: 34.65
7 6 (iii) Other Fixed Assets: (Rs. In lakh) i) Cost of furniture, Furnishing and official accessories ii) Cost of Deep Bore Tubewell for Water Reservoir 1.50 iii) Security Deposit to electricity Deptt. Etc iv) Preliminary & Pre-operative expenses including Company 1.50 Formation, Project Preparation, technical Consultancy, Travelling Expenses, Interest during construction period, Start-up Expenses etc. v) Delivery Van & Contingency etc Total: (iv) Total Fixed Investment: (Rs. In lakh) 1. Land & Building Plant & Machinery Other fixed assets Total: B) Working Capital (Per Month): (i) Salary & Wages: Sl. No. Designation No. Rate Total (Rs.) 1. Marketing-cum-Purchase Manager /- 10,000/- 2. Accountant-cum-Operator /- 4,000/- 3. Chemist-cum-Production Supervisor /- 6,000/- 4. Skilled Workers /- 4,000/- 5. Un-skilled Workers /- 12,000/- 6. Sweeper /- 3,000/- 7. Chowkidar /- 3,000/- 8. 6,000/- Total: 46,000/- (ii) Raw Material: Sl. No. Item Qty.(MT) Rate (Rs.) Value (Rs. lakh) 1. PET / PVC Bottled including cap 1.00 lakh Bottles labels etc. of 1 lit. size 2. Chemical and Reagents etc. L.S Corrugated Boxes, Strips, Tap etc. L.S Total: 5.10
8 7 (iii) Utilities: 1. Power, Electricity & Fuel. 50,000/- Total: 0.50 (iv) Other Contingent Expenses (P.M.): 1 Postage & Stationery 500/- 2 Telephone/Fax charges 500/- 3 Consumable Stores 1,000/- 4 Repairing & Maintenance 1,000/- 5 Transport charges 2,500/- 6 Advertisement & Publicity 500/- 7 Insurance & Taxes 300/- 8 Sales Expenses 3,200/- 9 License & other fees 500/- 10 Miscellaenous Expenses 1,000/- Total: 11,000/- Say: 0.11 (v) Working Capital / Total Recurring Expenditure (P.M.): (Rs. In lakhs) 1. Salary & Wages Raw Materials Utilities Other Contingent Expenses 0.11 Total: 6.17 (vi) Total working capital for 3 months 6,17,000 X 3 = Rs. 18,51,000/- = Rs Lakhs
9 8 C) TOTAL CAPITAL INVESTMENT: (Rs. In Lakhs) I. Fixed Capital II. Working Capital for 3 months Total: FINANCIAL ANALYSIS: i) Cost of Production (Per annum) Sl. No. Particulars Value (Rs. In Lakhs) 1. Working Capital for one year Depreciation on 5% Depreciation on machinery and 10% Depreciation on Furniture & 20% Interest on Total Capital 14% Total: ii) Turnover (Per Annum) Item Value (Rs. In Lakhs) By Sale f 12 lakh bottles (1 litr.) (1.00 lakh crates of 12 Rs.100/- per crate (factory premises) Sales Commission, Marketing expenses LS 9.00 Net Sales iii) NET PROFIT (Per annum) Before Taxation: Turn Over (-) Cost of Production 1,11,00,000/- (-) 92,86,000/- = Rs. 18,14,000/- (Rs Lakhs)
10 9 iv) NET PROFIT RATIO: (Per Annum): 16.34% v) RATE OF RETURN (Per Annum): 20.12% vi) BREAK EVEN POINT: 54% Names & Addresses of Machinery & Equipment Suppliers: 1. M/s Enviro Tech utility, 32-A, Main Patel Road, Opp. Wings Show Room, West Patgel Nagar, New Delhi M/s Watrion Water & Filter Engg. Pvt. Ltd., 1 Harsivan Apartment, Ground Floor, (Behind Canara Bank) West J. P. Road, Andheri (West) P. B. No. 7372, Mumbai M/s M/s Retail Agencies, 55-III Main Road, Gandhi Nagar, Chennai M/s Ion Exchange India Ltd., Ticcon House, Dr. E. House Road, Mahalaxmi, Mumbai M/s Alpha Engineering, 158, Pocket E-20, Sector-III, Rohini, Delhi *PSB*FEB2009* *******
P ACKAGED DRINKING WATER/ MINERAL WATER
17 P ACKAGED DRINKING WATER/ MINERAL WATER PRODUCT CODE : 224103008 QUALITY AND STANDARDS : ISI Specification for packaged drinking water is IS14543:1998 and for packaged natural mineral water is IS13428:1998.
PROJECT PROFILE ON MUSTARD OIL
PROJECT PROFILE ON MUSTARD OIL NAME OF THE PRODUCT : MUSTARD OIL. PRODUCT CODE : 211001023. QUALITY & STANDARD : PFA regulation is mandatory. Ag Mark for quality products. ISI Specification for Mustard
PROJECT PROFILE ON SOYA MILK,PANEER & CURD
PROJECT PROFILE ON SOYA MILK,PANEER & CURD NAME OF THE PRODUCT : SOYA MILK, PANEER & CURD. PRODUCT CODE : New Product. QUALITY & STANDARD : PFA (Prevention of Food Adulteration Act, 1955). PRODUCTION CAPACITY
PROJECT PROFILE. Product : Red Iron Oxide. Product Code : 24117, 31251. Quality Standard : IS : 44 : 1991 IS : 05 : 1994
PROJECT PROFILE Product : Red Iron Oxide Product Code : 24117, 31251 Quality Standard : IS : 44 : 1991 IS : 05 : 1994 Production Capacity ( Per Annum) : Quantity - 300M.T Value - Rs.1,50,00,000/- Month
PROJECT PROFILE ELECTRONIC GAS LIGHTER **************************
MSME-DI KANPUR PROJECT PROFILE ON ELECTRONIC GAS LIGHTER ************************** PART-I NAME OF THE PRODUCT : Electronic Gas Lighter. PRODUCT CODE : NIC 36491100X. Category : Electrical. QUALITY & STANDARD
PROJECT PROFILE DAIRY EQUIPMENTS **********************
MSME-DI KANPUR PROJECT PROFILE ON DAIRY EQUIPMENTS ********************** PART-I NAME OF THE PRODUCT : DAIRY EQUIPMENTS. PRODUCT CODE : QUALITY & STANDARD : Made of stainless steel grade with 0.7 Cr &
HDPE LAMINATED COLLAPSIBLE TUBES
HDPE LAMINATED COLLAPSIBLE TUBES 1. INTRODUCTION A typical Lamitube is a 5 layer structure with aluminium foil in the middle layer and polyethylene as an inner and outer layer. The Aluminium foil layer
PROJECT PROFILE ON PLASTER OF PARIS
PROJECT PROFILE ON PLASTER OF PARIS 1. Name of the Product: - Plaster of Paris 2. NIC Code: - 26945 3. Product Code: - 21304 4. Production capacity: - Quantity: 900 MT / year Value: Rs.6.18 lakh 5. Month
PROJECT PROFILE ON PACKAGED DRINKING WATER UNIT
PROJECT PROFILE ON PACKAGED DRINKING WATER UNIT PROF. NO.4 1. INTRODUCTION Water is essential for sustenance and multiplication of living organisms. Whether it is an unicellular ameba or complex human
Prepared by : Installed Capacity per Annum :
Project Profile on : Mobile servicing centre Installed Capacity per Annum : Item Quantity Rate Total(Rs) in Nos i) Servicing/Minor repair of Mobile 3000 150 450000/- ii) Servicing/major repair of mobile
MINI TOOL ROOM PRODUCT CODE 359960313
MINI TOOL ROOM PRODUCT CODE 359960313 QUALITY AND STANDARDS Tool room facility/machine shop is a servicing industry to cater the tooling needs such as jigs, fixture, press tools, die sets, forming tools
CHILLY AND TURMERIC POWDER
CHILLY AND TURMERIC POWDER 1.0 INTRODUCTION Spices are an integral part of the Indian diet since centuries and they are used in vegetarian and non-vegetarian food and snack preparations. They help enhance
CANVAS SHOES ( With Rubber Sole )
PROJECT PROFILE ON CANVAS SHOES ( With Rubber Sole ) NAME OF THE PRODUCT : CANVAS SHOES (With Rubber Sole) PRODUCT CODE : 30130100X. QUALITY & STANDARD : ISI:3735-1966 Canvas Shoes with Rubber Sole - Reaffirmed
PROJECT PROFILE ON ALUMINIUM FABRICATION
PROJECT PROFILE ON ALUMINIUM FABRICATION PRODUCT : Aluminium Fabrication QUALITY STANDARDS : IS: 1948-1961 IS: 1949-1961 PRODUCTION CAPACITY S.No. Description Qty. Value (Rs.in Lakhs) : a Stair case hand
PINEAPPLE AND ORANGE PRODUCTS
PINEAPPLE AND ORANGE PRODUCTS 1.0 INTRODUCTION Fruits are an important source of energy. However their availability is seasonal and they are perishable. Hence, they need to be processed and preserved which
PROJECT PROFILE ON MOBILE PHONE REPAIRING AND SERVICING
PROJECT PROFILE ON MOBILE PHONE REPAIRING AND SERVICING 1. Product:- Mobile Phone Repairing and Servicing 2. NIC Code (1998):- 52603 3. Product Code (ASICC-2000):- 97182 4. Production capacity:- Qty. 300
EDIBLE GROUNDNUT FLOUR
EDIBLE GROUNDNUT FLOUR 1.0 INTRODUCTION Groundnut flour is a cheap but good source of proteins compared to milk, eggs, meat etc. With more and more energy food plants coming up in many parts of the country,
VEGETABLE OIL REFINERY
VEGETABLE OIL REFINERY 1.0 INTRODUCTION: Vegetable oil and fat resources are indispensable to mankind as a source of nutrient and industrial raw materials. Crude vegetable oil obtained from various oil
FAMILY PROTECTION FROM WATERBORNE DISEASES
A Product by : GIVE A 100% FAMILY PROTECTION FROM WATERBORNE DISEASES CATALOGUE 100% SAFE WATER LATEST JAPAN TECHNOLOGY ABOUT US We are introducing a unique Water Purifier with the proud name of Harshali
PROJECT PROFILE PRODUCT CODE ASICC(2000): 71332. PRODUCTION CAPACITY : QUANTITY 8,04,000 mtrs. Lancing (P.A) Valued Rs.
PROJECT PROFILE NAME OF THE PROJECT: LANCING PIPE NIC CODE (1998): NIC:27152, PRODUCT CODE ASICC(2000): 71332 PRODUCTION CAPACITY : QUANTITY 8,04,000 mtrs. Lancing (P.A) Valued Rs. 3, 05,52,000 pipes MONTH
PRODUCTION CAPACITY : Ouantity (i) Development of 24 website per annum (ii) Update of 24 website per annum Value : Rs. 4,80,000/-
PROJECT PROFILE ON COMPUTER CENTRE FOR WEBSITE DESIGN AND DEVELOPMENT PRODUCT CODE (ASICC) : QUALITY STANDARDS : As per Customer Specifications PRODUCTION CAPACITY : Ouantity (i) Development of 24 website
PRODUCTION CAPACITY : Qty : 54000 Nos./ Annum Value : Rs. 16,74,000/-
PROJECT PROFILE ON ASSEMBLING/MOUNTING OF ELECTRONICS COMPONENTS ON PCB PRODUCT CODE (NIC) : --- QUALITY & STANDARDS : As per Customer s Specification PRODUCTION CAPACITY : Qty : 54000 Nos./ Annum Value
2.2 Quality Standards and Compliances The BIS has specified quality standards vide IS 1011:1992. Compliance with PFA Act is necessary.
BISCUIT MAKING 1.0 INTRODUCTION Biscuit making is a conventional activity in many parts of the country. Despite the advent of modern, large capacity and automatic biscuit making plants, large section of
1 VEGETABLE OIL REFINERY. 1.1 Introduction
1 VEGETABLE OIL REFINERY 1.1 Introduction Vegetable oil and fat resources are indispensable to mankind as a source of nutrient and industrial raw materials. Crude vegetable oil obtained from various oil
2.1 Compliance with PFA Act is mandatory. Adherence to AGMARK is advisable.
MINI OIL MILL 1.0 INTRODUCTION Consumption of edible oils is increasing year after year and India imports large quantities every year. Different types of oilseeds are grown in the country like groundnuts,
1.0 INTRODUCTION 2.0 PRODUCT 3.0 MARKET POTENTIAL 3.1 Demand and Supply 3.2 Marketing Strategy
COLD STORAGE 1.0 INTRODUCTION Cold storages are meant to preserve the perishable commodities of food items for a longer period with retention of the original colour, flavour and taste. However, each commodity
COMPUTER HARDWARE MAINTENANCE & NETWORKING SERVICE
COMPUTER HARDWARE MAINTENANCE & NETWORKING SERVICE SERVICE CAPACITY (Value) : Rs. 18,00,000/- MONTH AND YEAR : July, 2014 OF PREPARATION PREPARED BY : Dr. Amarnath Assistant Director (Metallurgy) 1. INTRODUCTION
TISSUE PAPER MANUFACTURING
PROJECT PROFILE ON TISSUE PAPER MANUFACTURING Prepared by: Kerala State Industrial Development Corporation September 2012 1 TISSUE PAPER PROJECT SUMMARY 1 The Proposal : To set up a Tissue Paper Production
AMLA PRODUCTS 2.0 PRODUCTS
AMLA PRODUCTS 1.0 INTRODUCTION Amla (Indian Gooseberry) is known for its medicinal values since long and it is used in various forms. Many ayurvedic and herbal preparations use amla as one of the ingredients.
PRODUCT : High Tensile Nuts & Bolts. PRODUCTION CAPACITY : Quantity. : 360 M.T. (Per annum) Value : Rs. 234.00 Lakhs
PRODUCT : NIC CODE : 343201011 QUALITY AND STANDARDS : IS 1363:1992 IS 1367:1994 IS 2389:1968 IS 4206:1987 PRODUCTION CAPACITY : Quantity. : 360 M.T. (Per annum) Value : Rs. 234.00 Lakhs MONTH & YEAR OF
1 BISCUIT PLANT. 1.1 Introduction
1 BISCUIT PLANT 1.1 Introduction Biscuit making is a conventional activity in many parts of the country. Despite the advent of modern, large capacity and automatic biscuit making plants, large section
1.0 INTRODUCTION 2.0 PRODUCTS 2.1 Applications 2.2 Availability of technology, Quality Standards and Compliances 3.
BAKERY 1.0 INTRODUCTION Bakery is a traditional activity and occupies an important place in food processing industry. Despite the advent of fully automatic and semi-automatic bread as well as biscuit making
MANGO PROCESSING. 2.1 Compliance with FPO and PFA Act is necessary.
MANGO PROCESSING 1.0 INTRODUCTION Mango is a fruit which has many varieties and is grown in majority of the states of the country. Pulp or juice of ripe mangoes is consumed along with main course. Many
PROJECT PROFILE ON CEMENT CONCRETE HOLLOW BLOCKS
PROJECT PROFILE ON CEMENT CONCRETE HOLLOW BLOCKS PRODUCT : Cement Concrete Hollow Blocks NIC CODE : 26959 (based on NIC 2004) PRODUCT CODE : 94459 (based on ASICC 2000) PRODUCTION CAPACITY : Quantity :
1.0 INTRODUCTION 2.0 PRODUCTS 2.1 Applications 2.2 Availability of know and compliances
PICKLES & CHUTNEY 1.0 INTRODUCTION Pickles & chutney are specialities of India and assume important position in the Indian cuisine. They are eaten along with main course and provide tempting tastes. Pickles
Electronic Gas Lighters
1 7 Electronic Gas Lighters PRODUCT CODE (ASICC) : 77134 QUALITY AND STANDARDS : The following BIS Standards may be referred: IS 11514:1985 Piezo electric ceramic cartridge for impact type gas lighters.
Papaya is grown in considerable quantity in MP. The area of MP in the year 2004-05 is 684 ha and production 18500 MT.
1 TUTTY-FRUITY 1.1 Introduction Tutty-fruity is made from unripe papaya fruit and contains substantial quantum of sugar. It is used as an additive in ice-cream and some sweets but its major consumption
POULTRY HATCHERY UNIT
POULTRY HATCHERY UNIT Introduction : Poultry meat is the fastest growing component of global meat production. Poultry production in the country has shown a steady increase in the last decade. As a result,
PROJECT PROFILE ON COTTON GINNING UNIT
PROF. NO.2 PROJECT PROFILE ON COTTON GINNING UNIT 1. INTRODUCTION A Cotton Gin (short for cotton engine) is a machine that quickly and easily separates the cotton fibers from the seedpods and the sometimes,
Knitted Socks (Cotton/Nylon)
13 Knitted Socks (Cotton/Nylon) PRODUCT CODE : 260103/260301 QUALITY AND STANDARDS : Nylon Socks-IS 5084:1990 Socks Cotton-IS 3329:1973 PRODUCTION CAPACITY : Quantity: 1,50,000 Dozen Pairs Value : Rs.
110. PROFILE ON PRODUCTION OF GLASS BOTTLES AND TUMBLERS
0. PROFILE ON PRODUCTION OF GLASS BOTTLES AND TUMBLERS 0-2 TABLE OF CONTENTS PAGE I. SUMMARY 0-3 II. PRODUCT DESCRIPTION & APPLICATION 0-3 III. MARKET STUDY AND PLANT CAPACITY 0-4 A. MARKET STUDY 0-4 B.
AIR CONDITION & REFRIGERATION INSTALLATION & REPAIR
AIR CONDITION & REFRIGERATION INSTALLATION & REPAIR SERVICE CAPACITY (Value) : Rs. 15,40,000/- MONTH AND YEAR : July, 2014 OF PREPARATION PREPARED BY : Sh. Sunil Arora Investigator (Mechanical) 1. INTRODUCTION
44-2 TABLE OF CONTENTS I. SUMMARY 44-3 II. PRODUCT DESCRIPTION & APPLICATION 44-3 III. MARKET STUDY AND PLANT CAPACITY 44-3 A.
MINERAL WATER 44-2 TABLE OF CONTENTS PAGE I. SUMMARY 44-3 II. PRODUCT DESCRIPTION & APPLICATION 44-3 III. MARKET STUDY AND PLANT CAPACITY 44-3 A. MARKET STUDY 44-3 B. PLANT CAPACITY & PRODUCTION PROGRAMME
Corn, Rice, Wheat are the major raw materials required for the production of extruded breakfast cereals.
1 BREAKFAST CEREALS 1.1 Introduction Extruded breakfast cereal products such as corn flakes, rice flakes, wheat flakes and other formulated breakfast cereal product are now gaining popularity in India.
PROJECT PROFILE. PRODUCTION CAPACITY: Quantity: 2,40,000 pairs of Eva Sole per annum. Valued at Rs 76,80,000/-
1 PROJECT PROFILE PRODUCT: MANUFACTURING OF EVA SOLE NIC CODE : 25191 PRODUCT CODE: ASICC: 41311 PRODUCTION CAPACITY: Quantity: 2,40,000 pairs of Eva Sole per annum Valued at Rs 76,80,000/- MONTH AND YEAR
Project Profile Flyash Bricks & Pavement Tiles ( COMBINED ) Product Code (Based on NIC -2004) for Bricks & Tiles: 26921
Project Profile Flyash Bricks & Pavement Tiles ( COMBINED ) Product: Flyash Bricks & Pavement Tiles Product Code (Based on NIC -2004) for Bricks & Tiles: 26921 Product Code: (Based on ASICC -2000) for
Quality Standards : As per Customer s requirement. Servicing Capacity : Qty : - Value : Rs. 8,00,000/- annum. Year of Preparation : 2006-07.
PROJECT PROFILE ON MOBILE PHONE REPAIRING & SERVICING *** Production Code : - Quality Standards : As per Customer s requirement Servicing Capacity : Qty : - Value : Rs. 8,00,000/- annum Year of Preparation
PROJECT PROFILE ON MINI FLOUR MILL
PROJECT PROFILE ON MINI FLOUR MILL PRODUCT : WHEAT FLOUR (Atta), SOOJI/RAWA WHEAT FLOUR (Maida), BRAN PRODUCT CODE : 204109000 (Wheat Flour) 204111003 (Sooji /Rawa) 204108004 (Maida) QUALITY STANDARD.
Medical Transcription
15 109 Medical Transcription PRODUCT CODE (ASICC) : 97720 QUALITY AND STANDARDS : N.A. PRODUCTION CAPACITY : Qty. : 27,00,000 Nos. of lines (per annum) Value : Rs. 67,50,000 YEAR OF PREPARATION : 2002
Iron and manganese are two similar elements
L-5451 2-04 Drinking Water Problems: Iron and Manganese Mark L. McFarland, Associate Professor and Extension Soil Fertility Specialist Monty C. Dozier, Assistant Professor and Extension Water Resources
14. PROFILE ON THE PRODUCTION OF PURIFIED WATER
14. PROFILE ON THE PRODUCTION OF PURIFIED WATER 14-2 TABLE OF CONTENTS PAGE I. SUMMARY 14-3 II. PRODUCT DESCRIPTION & APPLICATION 14-3 III. MARKET STUDY AND PLANT CAPACITY 14-4 A. MARKET STUDY 14-4 B.
CENTRE FOR CONTINUING EDUCATION BBA (AVIATION OPERATION)
CENTRE FOR CONTINUING EDUCATION BBA (AVIATION OPERATION) BATCH: SEMESTER: NAME: ROLL NO: ASSIGNMENT 1 & 2 FOR BUSINESS ACCOUNTING BBCF 131 UNIVERSITY OF PETROLEUM & ENERGY STUDIES Assignment-1 Note: All
AUTOMOBILE SERVICING STATION
AUTOMOBILE SERVICING STATION A. INTRODUCTION: For the past one and a half decade the passenger car population has been steadily increasing. This is mainly because the Indian economy is now considerably
Lesson Plan: How Do We Clean Polluted Water?
Lesson Plan: How Do We Clean Polluted Water? Oil Spill Cleanup / Phosphate Cleanup / Groundwater Contamination / Water Treatment Simulation Estimated Time: 2-4 days State Standards taught and addressed
Agricultural Machinery Custom Hiring Centres (CHC) Model Scheme
Agricultural Machinery Custom Hiring Centres (CHC) Model Scheme 1. Indian agriculture is undergoing a gradual shift from dependence on human power and animal power to mechanical power because increasing
Lesson-13. Elements of Cost and Cost Sheet
Lesson-13 Elements of Cost and Cost Sheet Learning Objectives To understand the elements of cost To classify overheads on different bases To prepare a cost sheet Elements of Cost Raw materials are converted
CHAPTER 12. Cost Sheet ( or) Statement of Cost ELEMENTS OF COST
CHAPTER 12 Cost Sheet ( or) Statement of Cost Introduction ELEMENTS OF COST Elements of cost are necessary to have a proper classification and analysis of total cost. Thus, elements of cost provide the
Complete. Water Solutions. for Rural India
Complete Water Solutions for Rural India More precious than gold. That s what safe drinking water is to India s rural population. Arsenic, iron, fluoride, nitrate, brackishness and pathogens in ground
Society of Certified Management Accountants of Sri Lanka
Copyright Reserved Serial No Technician Stage March 2009 Examination Examination Date : 28 th March 2009 Number of Pages : 06 Examination Time: 9.30a:m.- 12.30p:m. Number of Questions: 05 Instructions
V. INDUSTRIES AND MINERALS: (Rs.150.00 lacs)
V. INDUSTRIES AND MINERALS: (Rs.150.00 lacs) IN.1 Quality improvement of Industrial facilities: (Rs.20.00 lacs) a. Industrial Development-cum-Facility Centre: (Rs.5.00 lac) The Industrial Development-cum-Facility
Water Treatment & Purification Chemicals
Lime-Out Extra Water Treatment Cleaning Chemicals Dissolves tough lime, calcium & rust stains Non-abrasive thick jelly like liquid clings to vertical surfaces Cleans tubs, sinks, shower doors, dishwashers
Bakery PRODUCTS INTRODUCTION MARKET POTENTIAL
25 Bakery PRODUCTS PRODUCT CODE : 205801010 (Biscuit) QUALITY AND STANDARDS : PFA, Act 1954 (Mandatory) and BIS/ Specification (optional) Wafers: IS 2397:1988 Biscuits: IS 1011:1992 PRODUCTION CAPACITY
WASTEWATER TREATMENT OBJECTIVES
WASTEWATER TREATMENT OBJECTIVES The student will do the following: 1. Define wastewater and list components of wastewater. 2. Describe the function of a wastewater treatment plant. 3. Create a wastewater
Keeping Your Swimming Pool and Spa Healthy Environmental Health Guide
Keeping Your Swimming Pool and Spa Healthy Environmental Health Guide A swimming pool or spa can be an asset to your home, and provide the opportunity to take part in healthy relaxing activities. However,
PROJECT PROPOSAL FOR ESTABLISHING CO-ED POLYTECHNIC COLLEGE AT ANOOPPUR, DATIA, KATNI, MANDSOUR, RAISEN, REWA, SHAJAPUR (M.P.)
PROJECT PROPOSAL FOR ESTABLISHING CO-ED POLYTECHNIC COLLEGE AT ANOOPPUR, DATIA, KATNI, MANDSOUR, RAISEN, REWA, SHAJAPUR (M.P.) WITH CENTRAL ASSISTANCE 2007-08 Proposal Submitted by Technical Education
Water and Wastewater. Sample Collection and Analysis
Water and Wastewater Sample Collection and Analysis December 2011 Introduction Accurate testing of drinking water is crucial to maintaining the health and safety of Islanders who rely on this resource.
PROJECT PROFILE MODERN COLD STORAGE Prepared by: Kerala State Industrial Development Corporation
PROJECT PROFILE ON MODERN COLD STORAGE Prepared by: Kerala State Industrial Development Corporation PROJECT PROFILE FOR MODERN COLD STORAGE INTRODUCTION Cold Storage is a special kind of room, the temperature
Introduction. Creating Water Quality Confidence. Sample Communication and Guidance - Natural Treatment. Terminology Guidelines
Introduction This document is intended to provide guidance for water utility managers related to creating water quality confidence, specifically related to implementing Supply Replenishment projects. The
PROJECT PROFILE. RICE MILL (Capacity 4 TPH)
PROJECT PROFILE ON RICE MILL (Capacity 4 TPH) PREPARED BY 8 th Floor, Parishrama Bhavan, Basheerbagh, Hyderabad 1. Introduction: The Rice milling is the process that helps in removal of hulls and bran
Town of New Castle Utility Department Introduction
Town of New Castle Utility Department Introduction Town of New Castle Utility Department Mission Statement Our commitment is to ensure that our customers receive high quality water and wastewater treatment
85. PROFILE ON ENVELOPS, LABELS AND BADGES OF PAPER
85. PROFILE ON ENVELOPS, LABELS AND BADGES OF PAPER 85-2 TABLE OF CONTENTS PAGE I. SUMMARY 85-3 II. PRODUCT DESCRIPTION & APPLICATION 85-3 III. MARKET STUDY AND PLANT CAPACITY 85-4 A. MARKET STUDY 85-4
Transistor Radio Receivers (AM/FM)
5 35 Transistor Radio Receivers (AM/FM) PRODUCT CODE (ASICC) : 78261 QUALITY AND STANDARDS : Domestic Radio Receiver IS 615:1966 Community Radio Receiver IS 3397:1981. Utilising transistors, dry battery
MOBILE WATER TREATMENT FACILITY UMUV 01
MOBILE WATER TREATMENT FACILITY UMUV 01 January 10 Basic description of facility VODASERVIS s.r.o. UMUV 01 is a multi-purpose mobile water treatment facility which enables treatment from different sources
TOMATO SAUCE, KETCHUP AND PUREE
TOMATO SAUCE, KETCHUP AND PUREE 1.0 INTRODUCTION Tomato is a very popular vegetable throughout the country and it is grown in many states. Apart from use in vegetables, its down stream products like soup,
(AA11) FINANCIAL ACCOUNTING BASICS
All Rights Reserved ASSOCIATION OF ACCOUNTING TECHNICIANS OF SRI LANKA AA1 EXAMINATION - JANUARY 2016 (AA11) FINANCIAL ACCOUNTING BASICS Instructions to candidates (Please Read Carefully): (1) Time allowed:
Emergency Drinking Water Supply
Emergency Drinking Water Supply Seb Fisher Managing Director, Groundwater Engineering February 2014 Company Profile Groundwater Engineering is an international company specializing in water well engineering,
PROJECT PROFILE ON THE ESTABLISHMENT OF ALUMINIUM FRAMES PRODUCING PLANT
Investment Office ANRS PROJECT PROFILE ON THE ESTABLISHMENT OF ALUMINIUM FRAMES PRODUCING PLANT Development Studies Associates (DSA) October 2008 Addis Ababa Table of Contents 1. Executive Summary...1
ACTIVATED CARBON PLANT IN KERALA
PROJECT PROFILE ON ACTIVATED CARBON PLANT IN KERALA Prepared by: Kerala State Industrial Development Corporation PROJECT PROFILE FOR ACTIVATED CARBON PLANT INTRODUCTION Activated Carbon is the carbon produced
PROJECT PROFILE MANUFACTURING AND SALES OF DOMESTIC LIGHTS WITH LED TECHNOLOGY. Prepared by. United Electrical Industries Ltd, Pallimukku, Kollam
PROJECT PROFILE ON MANUFACTURING AND SALES OF DOMESTIC LIGHTS WITH LED TECHNOLOGY Prepared by United Electrical Industries Ltd, Pallimukku, Kollam (PSU-Industries Department) Company Profile Name of Company
Business Plan Template
Business Plan Entrepreneurship development is now considered one of the key paths to economic growth especially in a developing economy like ours. The rate of industrial development, economic growth and
VIPCLEAN Via Goretta 96/A Mappano di Caselle (TO) Tel 011.2207783 Fax 011.2207927 e-mail [email protected]
INTRODUCTION VIP Clean, acronym of Very Important Purewater, is an exclusive and innovative line dedicated to cleaning systems with pure water. VIP Clean products are been designed and conceived to meet
ources of Drinking Water
The drop on water Sources of Drinking Water Did you know that 40 per cent of Nova Scotians get their water privately from a drilled well, a dug well, or a surface water source? The other 60 per cent rely
Promotional initiatives
Promotional initiatives 8. The Ministry of Tourism may consider, on being approached, one time Central Financial Assistance not exceeding Rs. 200 lakhs to a governmental institute, such as ITI, polytechnic
The production of gram dal in the state in 2004 05 is 25.84 lakh MT. district wise production in the state is given in the table below:
1 GRAM FLOUR 1.1 Introduction Gram dal milling is an important industry, supplying flour of gram dal to mankind. Flour milling has been known from a very early date. Besan is used for day to day food products
UNIVERSITY EXAMINATIONS COURSE TITLE: FINANCIAL ACCOUNTING DATE: 19/08/2010
KABARAK UNIVERSITY UNIVERSITY EXAMINATIONS /2010 ACADEMIC YEAR FOR THE DEGREE OF MASTER OF BUSINESS ADMINISTRATION COURSE CODE: ACCT 510 COURSE TITLE: FINANCIAL ACCOUNTING STREAM: DAY: TIME: MBA THURSDAY
130. PROFILE ON PRODUCTION OF CORRUGATED PAPER BOX
130. PROFILE ON PRODUCTION OF CORRUGATED PAPER BOX 130-2 TABLE OF CONTENTS PAGE I. SUMMARY 130-3 II. PRODUCT DESCRIPTION & APPLICATION 130-3 III. MARKET STUDY AND PLANT CAPACITY 130-4 A. MARKET STUDY 130-4
(CAS-4) COST ACCOUNTING STANDARD ON COST OF PRODUCTION FOR CAPTIVE CONSUMPTION
(CAS-4) COST ACCOUNTING STANDARD ON COST OF PRODUCTION FOR CAPTIVE CONSUMPTION Cost Accounting Standards Board The following is the text of the COST ACCOUNTING STANDARD 4 (CAS-4) issued by the Council
Drinking water for Gaza Elaboration concept 2
Herontwerp 2014 Drinking water for Gaza Elaboration concept 2 Docent: Hassanpur Golriz, D. (Damon) Student: Roger Sylverstre Yapo (Group 4) Content 1) Reverse osmosis description --------------------------------------------------------------------------
SAMPLE CASE STUDIES FINANCE. M/s Vithal Enterprises
SAMPLE CASE STUDIES FINANCE 1) Introduction: Case Study 1 M/s Vithal Enterprises Shri Vishal Shantilal Hajeri is the Sole Proprietor of M/s Vithal Enterprises. Mr.Hajeri has passed BE Electronics from
Innovation and Progress in Water Treatment Technology
Innovation and Progress in Water Treatment Technology Degree of separation of ultrafiltration Summary of the various processes The water will be pressed through the between the raw water side and the filtrate
Inteligencia-Economica-exportaciones-por-naics
PrimaryNaics Main_Export_Dest 42 - Wholesale Trades 60 546 - Management, Scientific, and Technical Consulting Services 3-33 - 32 549 - Other Professional, Scientific, and Technical Services 4224 - Grocery
166. PROFILE ON SMALL RUMINANT MEAT PROCESSING
166. PROFILE ON SMALL RUMINANT MEAT PROCESSING 166-2 TABLE OF CONTENTS PAGE I. SUMMARY 166-3 II. PRODUCT DESCRIPTION & APPLICATION 166-3 III. MARKET STUDY AND PLANT CAPACITY 166-3 A. MARKET STUDY 166-3
Protecting your private water supplies. The possible causes of contamination and their remediation to prevent this risk.
Protecting your private water supplies The possible causes of contamination and their remediation to prevent this risk. Contamination from a variety of sources can occur potentially at any point throughout
Chapter 3: Separating Mixtures (pg. 54 81)
Chapter 3: Separating Mixtures (pg. 54 81) 3.2: Separating Mechanical Mixtures (PB Pg. 40 5 & TB Pg. 58 61): Name: Date: Check Your Understanding & Learning (PB pg. 40 & TB pg. 61): 1. What are four methods
221. PROFILE ON PRODUCTION OF PAPER ENVELOPE
221. PROFILE ON PRODUCTION OF PAPER ENVELOPE 221-2 TABLE OF CONTENTS PAGE I. SUMMARY 221-3 II. PRODUCT DESCRIPTION & APPLICATION 221-3 III. MARKET STUDY AND PLANT CAPACITY 221-4 A. MARKET STUDY 221-4 B.
CERTIFICATION TO OPERATE WATER AND WASTEWATER TREATMENT SYSTEMS APPLICATION INSTRUCTIONS
COMMONWEALTH OF PENNSYLVANIA DEPARTMENT OF ENVIRONMENTAL PROTECTION STATE BOARD FOR CERTIFICATION OF WATER AND WASTEWATER SYSTEMS OPERATORS CERTIFICATION TO OPERATE WATER AND WASTEWATER TREATMENT SYSTEMS
MAINTENANCE OF SMALL WATER SUPPLY, SANITATION AND IRRIGATION SCHEMES
MAINTENANCE OF SMALL WATER SUPPLY, SANITATION AND IRRIGATION SCHEMES John van Rijn INDEVELOPMENT MAINTENANCE OF SMALL WATER SUPPLY, SANITATION AND IRRIGATION SCHEMES Any part of this publication may be
Analysis of Service Tax on works contract w.e.f 01-07-2012
Budget 2012 has ushered a new system of taxation of services; popularly known as Negative List. The new changes are a paradigm shift from the existing system where only services of specified descriptions
Parts per million (ppm) or Milligrams per liter (mg/l): one part by weight of analyte to 1 million parts by weight of the water sample.
2015 Annual Drinking Water Quality Report St. Johns County Utility CR 214 Mainland We're pleased to present to you this year's Annual Water Quality Report. This report is designed to inform you about the
