dupont nomex paper type 410
|
|
- Rosa Short
- 7 years ago
- Views:
Transcription
1 dupont nomex paper type DuPont Nomex paper Type is an insulation paper which offers high inherent dielectric strength, mechanical toughness, flexibility and resilience. Nomex paper Type is the original form of Nomex paper, and is widely used in a majority of electrical equipment applications. Available in thicknesses (5 to.6 mm) ( to mil), Nomex paper Type is used in almost every known electrical sheet insulation application. Electrical Properties The typical electrical property values for Nomex paper Type are shown in Table. The AC Rapid Rise dielectric strength data of Table, representing voltage stress levels, withstood to seconds at a frequency of Hz. These values differ from long-term strength potential. DuPont recommends that continuous stresses in transformers not exceed.6 kv/mm ( V/mil) to help minimize the risk of partial discharges (corona). The full wave impulse dielectric strength data shown in Table are based on multiple sheets. These values are appropriate for the applications which employ these materials in such configurations. Data based on single sheets of material are available upon request. The geometry of the system has an effect on the actual impulse strength values of the material. The dielectric strength data are typical values and not recommended for design purposes. Design values can be supplied upon request. Table Typical Electrical Properties Nominal Thickness (mil) Dielectric strength AC rapid rise (V/mil) (kv/mm) Full wave impulse (V/mil) (kv/mm) 86 6 Dielectric Constant at Hz Dissipation Factor at Hz (x ) ASTM D- using 5 mm ( inches) electrodes, rapid rise; corresponds with IEC - subclause. except for electrode set-up of 5 mm ( inches) ASTM D-6 ASTM D- Please note: The properties in this data sheet are typical or average values and should not be used as specification limits. Unless otherwise noted, all properties were measured in air under standard conditions (in equilibrium at C, 5% relative humidity). Note that, like other products of papermaking technology, Nomex papers have somewhat different properties in the papermaking machine direction () compared to the cross direction (). In some applications it may be necessary to orient the paper in the optimum direction to obtain its maximum potential performance.
2 Temperature has a minor effect on dielectric strength and dielectric constant, as shown in Figure. Variations in frequency up to Hz have essentially no effect on the dielectric constant of DuPont Nomex paper Type. The effects of temperature and frequency on dissipation factor of dry Nomex paper Type.5 mm ( mil) paper are shown in Figure. The Hz dissipation factors of thinner papers are essentially the same as those for.5 mm ( mil) at temperatures up to C. At higher temperatures and frequencies, the thicker papers have somewhat higher dissipation factors than those shown for the.5 mm ( mil). Surface and Volume Resistivities of dry Nomex paper Type.5 mm ( mil) paper are shown in Figure as functions of temperature. The corresponding values for other thicknesses of Nomex paper Type are very similar. Percent of Room Temperature Value Figure. Effect of Temperature on Electrical Properties 8 5 Dielectric constant ( Hz) Dielectric strength 5 5 Dielectric constant ASTM D-; Dielectric strength ASTM D- Figure. Dissipation Factor versus Temperature and Frequency The relatively minor effects of moisture (humidity) on the electrical properties of Nomex paper Type.5 mm ( mil) are shown in Table. Like other organic insulating materials, Nomex paper is gradually eroded under attack by corona discharges. Corona intensity is a function of voltage stress, which, in turn, depends almost entirely on design parameters such as spacing between circuit elements, smooth vs. sharp contours, etc. Although corona does not occur during normal operation of properly designed electrical equipment, any device may be subject to occasional overvoltages which produce brief corona discharges; and it is important that the insulation not fail prematurely under these conditions. The voltage endurance (time to failure under corona attack) of Nomex paper Type is superior to other commonly used organic insulations and even compares favorably with some inorganic compositions, as shown in Figure. These data were obtained in all cases on single layers of.5 mm ( mil) materials at room temperature, 5% relative humidity, and Hz frequency. Times to failure at 5 Hz are approximately 6 times as long as indicated. Volume Resistivity, ohm.cm or Surface resistivity, ohm Figure. Resistivity versus Temperature Surface resistivity Volume resistivity 5 5 ASTM D-5 Dissipation Factor 5 Hz Hz Hz Hz 5 5 ASTM D- Table Humidity Effects on Electrical Properties Relative Humidity, % Oven Dry 5 6 Dielectric Strength (V/mil) (kv/mm) Dielectric Constant at Hz at khz Dissipation Factor at Hz (x ) at Hz (x ) Volume Resistivity, (ohm.cm) x x x ASTM D- using 5 mm ( inches) electrodes, rapid rise; corresponds with IEC - subclause. except for electrode set-up of 5 mm ( inches) ASTM D-6 ASTM D-
3 Mechanical Properties The typical mechanical property values for DuPont Nomex paper Type are shown in Table. The effects of high temperatures on tensile strength and elongation are illustrated in Figure 5. Nomex sheet structures also retain good mechanical properties at very low temperatures. At the boiling point of liquid nitrogen (minus 6 C or K) the tensile strength of Nomex paper Type.5 mm ( mil) paper exceeds its room temperature value by to % (depending on direction), while elongation to break is still greater than % (better than most inorganic materials at room temperature). This allows Nomex paper Type to work well in cryogenic applications. The effects of moisture (humidity) on tensile strength and elongation are shown in Figure 6. Like elongation, the tear strength and toughness of Nomex paper Type are also improved at higher moisture contents. The dimensions of bone-dry DuPont Nomex paper Type exposed to 5% relative humidity conditions will increase at most % in the machine direction and % in the cross direction (due to moisture absorption). This swelling is largely reversible when the paper is redried. The rate of change in dimensions will depend, of course, on paper thickness and configuration (for example, individual sheets versus tightly wound rolls). Variations in environmental humidity will usually produce dimensional changes which will be less than %. Stress in kv/mm Percent of Room Temperature Value Figure. Voltage Endurance of Various Insulating Materials Single Layer 8 Rag paper Polyester (mat/film/mat) % epoxy impregnation Glass/mica splittings/glass (with silicone) Polyester film.. Time, hr, for 5 th of Failures Asbestos paper Figure 5. Effect of Temperature on Mechanical Properties NOMEX paper Type ASTM D-5 Hz Tensile elongation () 8 Tensile strength () ASTM D-88 Table Typical Mechanical Properties Nominal Thickness (mil) Typical Thickness (mil) Test Method.6.8 ASTM D Basis Weight, g/m ASTM D66 Density, g/cc Tensile Strength, N/cm Elongation, % Elmendorf Tear, N Initial Tear Strength, N Shrinkage at C, % Method D; N/cm Data presented for Initial Tear Strength is listed in the direction of the sample per ASTM D-. The tear is degrees to sample direction hence for papers with a higher reported ITR, the paper will be tougher to tear in the cross direction. = machine direction of paper = cross direction of paper ASTM D88 ASTM D88 TAPPI ASTM D
4 Figure 6. Effect of Moisture on Mechanical Properties Figure. Useful Life versus Temperature 6 Percent of Bone-dry Value 8 Tensile elongation () Tensile strength () Aging Time, hr to kv/mm ( V/mil) Dielectric Strength 5 Log time = 86. C Relative Humidity, % ASTM D-88 8 ASTM D- (curved electrodes) However, even small dimensional changes, especially if they are non-uniform, can cause or accentuate non-flatness (sag, puckers, etc.) in the sheet, which can cause problems in critical operations like laminating or creping. Therefore, DuPont Nomex paper intended for these applications should be kept sealed in its protective polyethylene wrapper, to maintain uniform moisture content, until just before use. Thermal Properties The effects of long-time exposure of DuPont Nomex paper Type.5 mm ( mil) to high temperature on important electrical and mechanical properties are shown in figures, 8 and. These Arrhenius plots of aging behavior are the basis for the recognition of Nomex paper as a C insulation by Underwriters Laboratories, the U.S. Navy, and others, and are confirmed by more than years commercial experience. These curves can also be extrapolated to higher temperatures. Measurements show, for example, that Nomex paper Type will maintain kv/mm ( V/mil) dielectric strength for several hours at C, which is the performance predicted by the Arrhenius plot. The thermal conductivity of DuPont Nomex paper Type.5 mm ( mil) paper is shown in Figure. These values are similar to those for cellulosic papers, and, as with most materials, are primarily determined by specific gravity (density). Therefore, thinner grades of Nomex paper Type will have slightly lower conductivity, and thicker grades will have higher conductivities, as is seen in Table. The total system construction may affect the overall thermal conductivity, therefore, care should be taken in applying individual sheet data to actual situations. For example, two sheet insulations with identical thermal conductivities may have quite different effects on heat transfer from a coil, due to the differences in stiffness or winding tension which affect the spacing between the insulation layers. Aging Time, hr to 5% of Initial Strength in Machine Direction Aging Time, hr to 5% of Initial Elongation in Machine Direction Figure 8. Useful Life versus Temperature 6 5 Log time = 6. C + 8 Tested per UL-6 Figure. Useful Life versus Temperature 6 5 Log time =. 85 C + 8 Test per UL 6
5 Chemical Stability The compatibility of DuPont Nomex paper and pressboard with virtually all classes of electrical varnishes and adhesives (polyimides, silicones, epoxies, polyesters, acrylics, phenolics, synthetic rubbers, etc.), as well as other components of electrical equipment, is demonstrated by the many ULrecognized systems comprising Nomex as well as longstanding commercial experience. Nomex papers are also fully compatible (and in commercial use) with transformer fluids (mineral and silicone oils and other synthetics) and with lubricating oils and refrigerants used in hermetic systems. Common industrial solvents (alcohols, ketones, acetone, toluene, xylene) have a slight softening and swelling effect on Nomex paper Type, similar to that of water. These effects are mainly reversible when the solvent is removed. The Limiting Oxygen Index (LOI) of Nomex paper Type at room temperature ranges between and % (depending on thickness and density), and at C, from to 5%. Materials with LOI above.8% (ambient air) will not support combustion. Nomex paper Type must be heated between C and 5 C (again depending on thickness) before its LOI declines below the flammability threshold. The LOI data for Type. mm (5 mil) is shown in Figure. The effect of 6 megarads (6 Mgy) of MeV beta radiation on the mechanical and electrical properties of Nomex paper Type is shown in Table 5. (By comparison, a laminate of polyester film and polyester mat of the same thickness, % epoxy-impregnated, crumbled after 8 megarads, or 8 Mgy). Similar results were obtained on exposure to gamma radiation. The outstanding radiation resistance of Nomex paper has led to its use in critical control equipment for nuclear power installations. Figure. Therma; Conductivity versus Temperature Thermal Conductivity, mwatt/meter K) Table Thermal Conductivity Nominal Thickness (mil) ASTM E-.5.6 Density, g/cc Thermal Conductivity, mwatt/meter K 5 All data taken at C Limiting Oxygen Index, % Figure. Limiting Oxygen Index (LOI) 5 5 ASTM D-86 Table 5 Radiation Resistance to MEV Electrons (Beta Rays) (Mgy) Dose 8 6 Tensile Strength, % of original Elongation, % of original Dielectric Strength, kv/mm 5 Dielectric Constant Hz khz khz Dielectric Factor (x ) Hz khz khz 8 ASTM D-88 ASTM D- with a 6. mm (. inches) diameter electrode ASTM D-
6 UL ratings Table 6 shows the UL ratings for the Type papers. Descriptions of the numerical values for each of the UL ratings are detailed in the DuPont brochure entitled The UL Yellow Card, available from DuPont. Table 6 UL s ASTM D Thickness (mils) ASTM D Thickness UL Flame Class UL6A HWI UL6A HAI UL6B RTI Electrical UL6B RTI Mechanical UL6A HVTR 5 8. V- 5. V-. V-.5 V-. V-.8 V-.5 V-.6 V-. V-.6 V- UL6A CTI To contact us about DuPont Nomex or for global product support, contact us in your region (listed below). USA DuPont Advanced Fibers Systems Customer Inquiry Center 5 Jefferson Davis Highway Richmond, VA Tel: Fax: Keith.W.Dunnavant@dupont.com Canada E. I. DuPont Canada Company Advanced Fibers Systems P.O. Box Streetsville Postal Station Mississauga, Ontario, L5M H Canada Tel: 8.8./5.8.5 Fax: products@can.dupont.com Europe Du Pont International Operations Sàrl P.O. Box 5 CH- le Grand Saconnex Geneva, Switzerland Tel: Fax: info.nomex@che.dupont.com South America DuPont do Brasil S. A. Alameda Itapecuru, 56 Alphaville Barueri São Paulo, Brasil 65-8 Tel: Fax: produtos.brasil@bra.dupont.com nomexpaper.dupont.com Japan DuPont Teijin Advanced Papers (Japan) Limited Sanno Park Tower -, Nagata-cho -chome Chiyoda-ku, Tokyo -6 Japan Tel: Fax: chihiro.kondo@dupont.com Asia Pacific DuPont Teijin Advanced Papers (Asia) Limited 6/F, Tower 6, The Gateway, Canton Road Tsimshatsui, Kowloon Hong Kong Tel: Fax: nomexpaper@hkg.dupont.com Product safety information is available upon request. This information corresponds to our current knowledge on the subject. It is offered solely to provide possible suggestions for your own experimentation. It is not intended, however, to substitute for any testing you may need to conduct to determine for yourself the suitability of our products for your particular purposes. This information may be subject to revision as new knowledge and experience become available. Since we cannot anticipate all variations in actual end-use conditions, DuPont makes no warranties and assumes no liability whatsoever in connection with any use of this information. Nothing in this publication is to be considered as a license to operate under or a recommendation to infringe upon any trademark or patent right. Copyright DuPont. The DuPont Oval Logo, DuPont, The miracles of science, and Nomex are registered trademarks or trademarks of E.I. du Pont de Nemours and Company or its affiliates. All rights reserved. K-6- (8/) Printed in the U.S.A.
DuPont Nomex Paper Type 410
DuPont Nomex Paper Type 4 Technical Data Sheet DuPont Nomex paper Type 4 is an insulation paper which offers high inherent dielectric strength, mechanical toughness, flexibility and resilience. Nomex paper
More informationElectrical properties
NOMEX NOMEX Type 41 is a calendered insulation paper which offers high inherent dielectric strength, mechanical toughness, flexibility and resilience. NOMEX Type 41 is the original form of NOMEX paper,
More informationNOMEX MOISTURE EFFECTS AND PROCESSING INFORMATION FOR NOMEX PAPER PERFORM WHEN THE HEAT S ON1
NOMEX only by DuPont MOISTURE EFFECTS AND PROCESSING INFORMATION FOR NOMEX PAPER PERFORM WHEN THE HEAT S ON Introduction With increasing trends to tighter tolerances and process optimization, the issue
More informationTechnical Information. UL-Recognized 600 Volt Class Electrical Insulation Systems Based On NOMEX
Technical Information UL-Recognized 600 Volt Class Electrical Insulation Systems Based On NOMEX Technical Information UL-Recognized 600 Volt Class Electrical Insulation Systems Based On NOMEX U. L. File
More informationDuPont Kapton HN. polyimide film
DuPont Kapton HN polyimide film Technical Data Sheet DuPont Kapton HN general-purpose film has been used successfully in applications at temperatures as low as -269 C (-452 F) and as high as 400 C (752
More informationMylar polyester film. Electrical Properties. Product Information. Dielectric Strength. Electrode Size. Film Thickness
Product Information Mylar polyester film Electrical Properties Mylar offers unique design capabilities to the electrical industry due to the excellent balance of its electrical properties with its chemical,
More informationDuPont Kapton. polyimide film. General Specifications
DuPont Kapton polyimide film General Specifications Introduction DuPont manufactures and sells a variety of highquality polyimide film products in conformance with ISO 9002 certification. These specifications
More informationDuPont Packaging & Industrial Polymers
DuPont Packaging & Industrial Polymers DuPont Biomax Thermal 300 Biomax Thermal Resins Product Data Sheet Description Product Description Biomax Thermal 300 is an ethylene copolymer with a nucleating agent
More informationNEMA Magnet Wire Thermal Class Ratings
NEMA Magnet Wire Thermal Class Ratings How to Use Them, and How They are Derived Ron Beeckman Essex Group, Inc. Thermal Class of Magnet Wire is Based upon: Temperature Index: (ASTM): A number which permits
More informationDELRIN HYTREL MINLON RYNITE
ddupont Engineering Polymers Design Check Chart DELRIN HYTREL MINLON RYNITE ZYTEL DELRIN HYTREL MINLON RYNITE ZYTEL DELRIN HYTREL MINLON RYNITE ZYTEL DELRIN HYTREL MINLON RYNITE ZYTEL DELRIN HYTREL MINLON
More informationRTV162. Electronic Grade Silicone Adhesive Sealant
RTV162 Product Description Electronic Grade Silicone Adhesive Sealant RTV162 adhesive sealant from GE Silicones is one-component, readyto-use electronic grade silicone sealant. It cures to a tough, resilient
More informationTable of Contents. Electrical Properties... 11 Effect of Humidity... 12 Effect of Temperature... 14 Effect of Frequency... 16 Corona Life...
Table of Contents General Information... 1 Physical and Thermal Properties... 3 Mechanical Properties... 5 Hydrolytic Stability... 6 Dimensional Stability... 7 Thermal Aging... 8 Electrical Properties...
More informationTypical values for a Kapton Polyimide tape wrapped sample, according to NEMA Specifications
DACRON DACRON GLASS FIBER COVERED MAGNET WIRE CLASS 200 INSULATION DACRON Glass Fiber-covered Magnet Wire is manufactured by serving a combination of glass and Dacron fibers over a bare or film-coated
More informationPhysical Dry Conditioned Unit Test method
Technical Data Sheet Ixef 1022 Ixef 1022 is a 50% glass-fiber reinforced, general purpose compound that exhibits very high strength and rigidity, outstanding surface gloss, and excellent creep resistance.
More informationDUPONT PERFORMANCE POLYMERS Joint Design: A Critical Factor in Strong Bonds GENERAL GUIDELINES FOR ULTRASONIC, VIBRATION AND SPIN WELDING
DUPONT PERFORMANCE POLYMERS Joint Design: A Critical Factor in Strong Bonds GENERAL GUIDELINES FOR ULTRASONIC, VIBRATION AND SPIN WELDING Introduction Welding techniques for assembling parts molded with
More informationRTV159. RTV157 and RTV159 High Strength Silicone Adhesive Sealants
RTV159 RTV157 and RTV159 High Strength Silicone Adhesive Sealants Product Description RTV157 and RTV159 are one-component, ready-to-use, high strength silicone rubber adhesive sealants. They cure to tough
More informationWire and Cable Product Guide
Wire and Cable Product Guide Applications Elvax resins with low vinyl acetate content, typically 9 to 15%, are well suited for compounding into primary insulation of UL listed, type XHHW building wire,
More informationSILASTIC 9161 RTV Silicone Elastomer
Product Information SILASTIC 9161 RTV Silicone Elastomer FEATURES Room temperature cure Usable at temperatures from -50 C to +250 C Excellent dielectric properties Highly resistant to moisture, oxidation
More information3M Thermally Conductive Adhesive Transfer Tapes
Technical Data July 215 3M Thermally Conductive Adhesive Transfer Tapes 885 881 8815 882 Product Description 885, 881, 8815 and 882 are designed to provide a preferential heat-transfer path between heat-generating
More informationHOSTAFORM C 9021 POM Unfilled
Description Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNR, 03-002 POM copolymer Standard-Injection molding type with high rigidity, hardness and toughness;
More informationTwo component epoxy paste adhesive
Advanced Materials Araldite 2015 Structural Adhesives TECHNICAL DATA SHEET Araldite 2015 Two component epoxy paste adhesive Key properties Toughened paste Ideal for bonding GRP, SMC and dissimilar substrates
More information3M Thermal Bonding Film AF42
Technical Data August 2015 3M Thermal Bonding Film AF42 Product Description 3M Thermal Bonding Film AF42 is an epoxy, thermoset film adhesive developed for structural bonding of metal, glass and other
More informationDuPont Pyralux AP. flexible circuit materials. Technical Data Sheet
DuPont Pyralux AP flexible circuit materials Technical Data Sheet Description DuPont Pyralux AP flexible circuit materials are a double-sided, copper-clad laminate and an allpolyimide composite of polyimide
More informationTemperature C 10 15 23 40. Cure time to reach hours - - - - LSS > 1MPa minutes 20 12 8 2
Advanced Materials Araldite 2021 Structural Adhesives TECHNICAL DATA SHEET Araldite 2021 Two component toughened methacrylate adhesive system Key properties Rapid curing High peel strength Multi purpose
More informationDuPont Kevlar The ScIence of cut PRoTecTIon
DuPont Kevlar The Science of Cut Protection Industry standards groups have made tremendous progress in testing and measuring the cut protective performance of gloves and apparel. DuPont has been a pioneer
More informationElectrical Maintenance Workshop
Electrical Maintenance Workshop Transformer Maintenance & Testing Thursday, November 6, 2003 Transformer Maintenance & Testing Purpose This presentation provides an overview of the major considerations
More information3 Single-Coated Foam Tapes
3 Single-Coated Foam Tapes Technical Data May, 2008 Product Description 3M Single-Coated Foam Tapes will adhere to a variety of substrates, including latex-painted wood, lacquered wood, enameled steel,
More information3M Scotchcast Electrical Resin 251 Two-Part, Oven-Curing, Class F, Rigid, Filled, Epoxy Liquid Resin
3M Scotchcast Electrical Resin 251 Two-Part, Oven-Curing, Class F, Rigid, Filled, Epoxy Liquid Resin Data Sheet April 2013 Description 3M Scotchcast Electrical Resin 251 is a medium viscosity, rigid, Class
More informationAmodel AS-1133 HS. polyphthalamide. Technical Data Sheet
Technical Data Sheet Amodel AS-1133 HS Amodel AS-1133 HS is a 33% glass reinforced, heat stabilized (PPA) resin that provides excellent structural integrity in molded parts, even those with wall thicknesses
More informationTwo component epoxy paste adhesive. Ideal for bonding GRP, SMC and dissimilar substrates
Advanced Materials Araldite 2015 Structural Adhesives TECHNICAL DATA SHEET Araldite 2015 Two component epoxy paste adhesive Key properties Toughened paste Ideal for bonding GRP, SMC and dissimilar substrates
More informationDuPont Pyralux AP All-Polyimide Flexible Laminate A Family of High-Performance Adhesiveless Laminates for Flexible Printed Circuit Applications
Technical Information DuPont Pyralux AP All-Polyimide Flexible Laminate A Family of High-Performance Adhesiveless Laminates for Flexible Printed Circuit Applications Product Description Pyralux AP double-sided,
More informationKALPANA INDUSTRIES LTD. TECHNICAL DATA SHEET
1 KALPANA INDUSTRIES LTD. TECHNICAL DATA SHEET KI XL - 03 / KI-SC 10 TWO COMPONENT AMBIENT CURABLE POLYETHYLENE COMPOUND FOR INSULATION OF LOW VOLTAGE POWER CABLE DESCRIPTION : KI polyethylene compound
More informationDuPont Crastin. thermoplastic polyester resin PRODUCT AND PROPERTY GUIDE
DuPont Crastin thermoplastic polyester resin PRODUCT AND PROPERTY GUIDE DuPont Crastin thermoplastic polyester resin DuPont Crastin PBT (polybutylene terephthalate) thermoplastic polyester offers exceptional
More informationDuPont Freon REFRIGERANTS
DuPont Freon REFRIGERANTS Technical Information T-12 SI Thermodynamic Properties of DuPont Freon 12 (R-12) Refrigerant Thermodynamic Properties of DuPont Freon 12 (R12) SI Units Tables of the thermodynamic
More informationHytrel polyester elastomer
Product Information HTY-01 (R) Hytrel polyester elastomer Rheology and Handling Hytrel polyester elastomers are true thermoplastic polymers that are processed using conventional thermoplastic techniques.
More informationPolyimide labels for Printed Circuit Boards
Polyimide labels for Printed Circuit Boards The right match for any PCB labelling application Labels on Printed Circuit Boards Matching product performance with application needs Printed Circuit Boards
More informationProduct Information. Thermal Properties of Elvax Measured by Differential Scanning Calorimeter (DSC) Summary
Product Information Thermal Properties of Elvax Measured by Differential Scanning Calorimeter (DSC) Summary The melting and freezing points of various Elvax ethylene vinyl acetate (EVA) polymers were measured
More informationAdhesive Transfer Tapes with Adhesive 200MP 467MP 468MP 467MPF 468MPF 7952MP 7955MP 7962MP 7965MP 9172MP 9185MP 9667MP 9668MP
Adhesive Transfer Tapes with Adhesive 200MP 467MP 468MP 467MPF 468MPF 7952MP 7955MP 7962MP 7965MP 9172MP 9185MP 9667MP 9668MP Technical Data March, 2014 Product Description 3M High Performance Acrylic
More informationKODAK PLUS-X AEROGRAPHIC Film 2402
AS-45 KODAK PLUS-X AEROGRAPHIC Film 2402 KODAK PLUS-X AEROGRAPHIC Film 2402 is a panchromatic, negative camera film with medium speed, medium-high contrast, and extended red sensitivity for the reduction
More informationnature invented packaging. We improved it. DuPont Tyvek PROTECTIVE PACKAGING
nature invented packaging. We improved it. DuPont Tyvek PROTECTIVE PACKAGING Why Tyvek? Since its discovery back in 1955, DuPont TM Tyvek has been used in various sectors for a wide range of purposes.
More informationIS800 Series. Technical Data Sheet IS802, IS803, IS808, IS800.09. Description. Key Features and Benefits. Typical Physical Properties
1810.html Technical Data Sheet IS800 Series IS802, IS803, IS808, IS800.09 Description IS802, IS803, IS808 and IS800.09 one-component, ready-to-use silicone adhesive sealants have a paste-like consistency
More informationAraldite AV 170. Advanced Materials. One component epoxy adhesive. Structural Adhesives. Key properties. Description. Product data.
Advanced Materials Araldite AV 170 Structural Adhesives Araldite AV 170 One component epoxy adhesive Key properties Cures at 140-180 C Heat resistant to 120 C Very good peel strength Good chemical resistance
More informationAthena is the name given to our assortment of electronic tapes. products of the very highest quality. These tapes both conduct and
Electric Athena. Athena is the name given to our assortment of electronic tapes products of the very highest quality. These tapes both conduct and insulate against electricity, in addition to warmth and
More informationDouble Coated Urethane Foam Tapes
3 Double Coated Urethane Foam Tapes 4004 4008 4016 4026 4032 4052 4056 4085 Technical Data April, 2009 Product Description 3M Double Coated Urethane Foam Tapes are conformable foams that offer high shear
More informationRecent Advances in Rubber Roll Covers for Improved Paper Machine Performance and Reduced Energy Requirements
Recent Advances in Rubber Roll Covers for Improved Paper Machine Performance and Reduced Energy Requirements Dilip De, Ph.D. Research and Product Engineering Charles Hunter, Ph.D. Research and Product
More informationPOWER RELAY. FTR-K1-KS Series. 1 POLE - 16A / Inrush 120A relay FTR-K1 SERIES FEATURES
POWER RELAY POLE - 6A / Inrush 20A relay FTR-K-KS Series FTR-K SERIES FEATURES pole 6A, form A or form C Peak inrush current 20A / TV-8 Coil power 400mW High insulation in small package (between coil and
More informationAC and Pulse Film Foil Capacitors KP Radial Potted Type
AC and Pulse Film Foil Capacitors KP Radial Potted Type 0.5 L max. W max. Marking H max. FEATURES 5 mm lead pitch, supplied loose in box taped in ammopack or reel Material categorization: for definitions
More information3M Electrically Conductive Adhesive Transfer Tape 9703
Technical Data April 2011 M Electrically Conductive Adhesive Transfer Tape 970 Product Description M Electrically Conductive Adhesive Transfer Tape 970 is a pressure sensitive adhesive (PSA) transfer tape
More informationAramid Fibre/Phenolic Honeycomb
Aramid Fibre/Phenolic Honeycomb Product Data Description HexWeb HRH-10 is manufactured from aramid fibre sheets. A thermosetting adhesive is used to bond these sheets at the nodes, and, after expanding
More informationScotch-Weld TM. Epoxy Adhesive 1838 B/A Green 1838 B/A Tan 1838-L B/A Translucent. Technical Data February, 2016. Product Description
3 Scotch-Weld TM 1838 1838 1838-L Technical Data February, 2016 Description 3M TM Scotch-Weld TM s 1838 and are controlled flow products; Scotch-Weld 1838-L is flowable. These epoxy adhesives are two-part,
More informationMake up Epoxy adhesive
Epoflex Base Materials series of MSC Polymer AG offers flexible base materials from simple single side flexible boards, flex-rigid applications up to highly complex multilayer boards. The dielectric is
More informationMagnet Wire Hermincel 200 C
Magnet Wire Hermincel 200 C Description HERMINCEL is the generic name of multipurpose Magnet Wire produced based on polyester (Amide-Imide) insulation overcoated with polyamideimide. This wire has excellent
More informationHow To Make A Microprocessor Based Microprocessor From A Microchip
1 ACMPSGQ42014_v5.indd 1 Custom Materials RT/duroid, TMM, XT/duroid, ULTRALAM High Frequency Laminates Dielectric Constant, er @ 10 GHz Process (1) Design (11) Dissipation (1) Factor TAN d @ 10 GHz Thermal
More information1.5. UL flammability ratings. *Nylon 6.6 = Polyamide 6.6 is Halogen-free and Silicone-free.
1.5 UL flammability ratings WWW.CABLEJOINTS.CO.UK THORNE & DERRICK UK TEL 0044 191 490 1547 FAX 0044 191 477 5371 TEL 0044 117 977 4647 FAX 0044 117 977 5582 WWW.THORNEANDDERRICK.CO.UK Flammability ratings
More informationTaking the Next Step to Reduce Flexible Packaging Waste and Cost
DuPont Packaging Profile Taking the Next Step to Reduce Flexible Packaging Waste and Cost W H I T E P A P E R Bernard Rioux DuPont Packaging Introduction Manufacturers of packaged goods everywhere face
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60502-1 Second edition 2004-04 Power cables with extruded insulation and their accessories for rated voltages from 1 kv (U m = 1,2 kv) up to 30 kv (U m = 36 kv) Part 1: Cables
More informationWhite Paper. Safety Considerations When Using Optocouplers and Alternative Isolators for Providing Protection Against Electrical Hazards.
Safety Considerations When Using Optocouplers and Alternative Isolators for Providing Protection Against Electrical Hazards White Paper Introduction Optocouplers and alternative isolation technologies
More information1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES
POWER RELAY 1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES RoHS compliant FEATURES Ultra slim type with 5 mm thickness Good for high density mounting Low power consumption and high sensitivity Nominal
More informationAviation. ACRYLITE Acrylic Sheet Products for Aircraft Transparencies
Aviation ACRYLITE Acrylic Sheet Products for Aircraft Transparencies Evonik CYRO LLC, an Evonik Degussa Corporation group company, is a leading manufacturer of acrylic sheet & molding compounds, and bulk
More informationDuPont Personal Protection TECHNICAL BULLETIN NUCLEAR RISKS
DuPont Personal Protection TECHNICAL BULLETIN NUCLEAR RISKS Specific questions have arisen related to the recent disaster which has occurred in Japan. A question frequently asked relates to protection
More information4. Cryogenic gloves are generally designed to protect the hands from intense cold or heat.
PROTECTIVE GLOVES In many University laboratories, exposure to chemicals, infectious agents, sharp objects, extreme temperatures and other hazards can create a potential for injury to the hand. Wherever
More informationScotch-Weld TM. Acrylic Adhesives. DP8405NS Green. Product Data Sheet. Date: March 2014 Supersedes: August 2013
Scotch-Weld TM Product Data Sheet Acrylic Adhesives Date: Supersedes: August 2013 Product Description 3M TM Scotch-Weld Acrylic Adhesives are high performance, twopart acrylic adhesives that offer good
More informationMICROPOSIT LOL 1000 AND 2000 LIFTOFF LAYERS For Microlithography Applications
Technical Data Sheet MICROPOSIT LOL 1000 AND 2000 LIFTOFF LAYERS For Microlithography Applications Regional Product Availability Description Advantages North America Europe, Middle East and Africa Latin
More information3 7808 E - 3M TT3 MS PET 50-310E-90WG Thermal Transfer Polyester Label Material
3 Product Data Sheet Issued February 2002 Supersedes July 2001 Physical Properties Facestock 56 micron Matte Silver polyester (Calipers are nominal values) Adhesive 20 micron #310 E Acrylic Liner Shelf
More informationTechnical Data Sheet February 2014
Scotch-Weld Technical Data Sheet February 2014 Product Description s are high performance, two-part acrylic adhesives that offer excellent shear, peel, and impact performance. These toughened products
More informationZero peel strength of acrylic pressure sensitive adhesive is at about 45 C (-50 F).
PRODUCT BULLETIN Aluminum Polyimide Acrylic (3M 966) PSA First Surface Aluminum Coated Polyimide Tape with Acrylic 3M 966 Adhesive TAPES Sheldahl Brand Materials first surface aluminized polyimide tape
More informationNomex KD Technology. DuPont TM. DuPont s Heritage in Hot Gas Filtration Application. For over 4 decades, a filter media made of Nomex
DuPont s Heritage in Hot Gas Filtration Application For over 4 decades, a filter media made of Nomex brand fibre has been considered as the state of the art product in typical filtration applications such
More informationThe following document contains information on Cypress products.
The following document contains information on Cypress products. HANDLING PRECAUTIONS 1. Handling Precautions Any semiconductor devices have inherently a certain rate of failure. The possibility of failure
More information3 Destructible Vinyl Label Material 7613T / 7930T
3 Destructible Vinyl Label Material Technical Data September, 2010 Product Description 3M Destructible Vinyl Label Materials 7613T and 7930T are consistent, smooth, topcoated films designed to exhibit
More informationProduct Sheet. Silicone Adhesive Sealants. RTV Silicone Adhesive Sealants
Product Sheet Silicone Adhesive Sealants Adhesives come in a wide array of chemistries each having its specialist properties and applications. In this context silicones are often referred to as sealants
More information1 POLE - 5A SLIM POWER RELAY
POWER RELAY POLE - A SLIM POWER RELAY FTR-MY Series RoHS compliant FEATURES Width mm, height mm,(% smaller than NY series) area mm, super slim, low power, compact and light weight.gr. Nominal power: mw
More informationBalancing the Electrical and Mechanical Requirements of Flexible Circuits. Mark Finstad, Applications Engineering Manager, Minco
Balancing the Electrical and Mechanical Requirements of Flexible Circuits Mark Finstad, Applications Engineering Manager, Minco Table of Contents Abstract...............................................................................................
More informationMICRO PLASTICS MOLDED NYLON 6/6 FASTENERS MECHANICAL TEST DATA - UNC - UNF SECTION
MICRO PLASTICS MOLDED NYLON 6/6 FASTENERS MECHANICAL TEST DATA - UNC - UNF Nylon 6/6 meets MIL-M20693B "A" Type 1, LP410A, and ASTM D789-66 Type 1, GDE 2 All test performed per ASTM specifications. Parts
More informationConstruction. 3-part thixotropic epoxy patching mortar. Product Description. Tests
Product Data Sheet Edition 05/12/2014 Identification no: 020204030010000044 Sikadur -41 CF Rapid 3-part thixotropic epoxy patching mortar Construction Product Description Uses Characteristics / Advantages
More informationType RP73 Series. SMD High Power Precision Resistors. Key Features. Applications. Characteristics - Electrical - RP73 Series - Standard
Key Features n High precision - tolerances down to 0.05% n Low TCR - down to 5ppm/ C n Stable high frequency performance n Operating temperature -55 C to +155 C n Increased power rating - up to 1.0W n
More informationDuPont Automotive Performance Materials to Help Electrify Vehicles
DuPont Automotive Performance Materials to Help Electrify Vehicles Hitoshi Shioya Paul J Kane Segment Leader - Asia Pacific North America HV/EV market forecast Over 10% of Vehicle Production 2 CY2020 Estimated
More informationChoosing The Proper Short Cut Fiber for Your Nonwoven Web
Choosing The Proper Short Cut Fiber for Your Nonwoven Web ABSTRACT You have decided that your web needs a synthetic fiber. There are three important factors that have to be considered: generic type, diameter,
More informationSolid-Cast Versus Resin-Encapsulated Transformers
Data Bulletin 7300DB0402 12/2004 Monroe, NC USA Replaces 7300PD9202, 02/1992 Solid-Cast Versus Resin-Encapsulated Transformers Class 7300 Retain for future use. OVERVIEW The continuing development of dry-type
More information3 Thermal Transfer Acrylate Label Material 3921
3 Thermal Transfer Acrylate Label Material Technical Data April, 2008 Product Description 3M Thermal Transfer Acrylate Label Material consists of a non-topcoated acrylate facestock designed for thermal
More informationIntroduction: Consumables - Part of the Identification System
Consumables - The Basics A presentation from: Introduction: Consumables - Part of the Identification System You have spent many hours researching, selecting, and getting approval for your new data collection
More informationLabel Material 7871 Thermal Transfer Polyester Label Material
Product Data Sheet Updated : May 2000 Supersedes : February 1999 Physical Properties Facestock 51 micron (2.0 thou) Gloss Radiant White Polyester (Calipers are nominal values) Adhesive 46 micron (1.8 thou)
More informationThermal Management Solutions for Printed Circuit Boards used in Digital and RF Power Electronics and LED assemblies
Thermal Management Solutions for Printed Circuit Boards used in Digital and RF Power Electronics and LED assemblies Sandy Kumar, Ph.D. Director of Technology American Standard Circuits, Inc 3615 Wolf Road
More informationAn Overview of Lapp Insulator High Voltage Bushing Design
An Overview of Lapp Insulator High Voltage Bushing Design W.A. Young Lapp Insulator Company LeRoy, NY 14482 USA INTRODUCTION High voltage bushings are devices designed to transmit electric energy through
More information3 Thermal Transfer Polyester Label Materials 7816 7816FL 7875
3 Thermal Transfer Polyester Label Materials Technical Data July, 2010 Product Description 3M Thermal Transfer Polyester Label Materials 7816, 7816FL and 7875 are durable polyester label stocks that offer
More informationCHARACTERIZATION OF POLYMERS BY TMA. W.J. Sichina, National Marketing Manager
PERKIN ELMER Polymers technical note CHARACTERIZATION OF POLYMERS BY W.J. Sichina, National Marketing Manager Thermomechanical analysis () is one of the important characterization techniques in the field
More informationC A B L E P R O T E C T I O N
Safe cable protection! Elematic Cabling Systems produces in own plants a wide range of products for the cable protection, such as wiring spirals, insulated tubing, heat shrinkable tubing, etc. These products
More informationKODAK PANATOMIC-X AEROGRAPHIC II Film 2412 KODAK PANATOMIC-X AERECON II Film 3412
AS-112 KODAK PANATOMIC-X AERECON II Film 3412 and KODAK PANATOMIC-X AERECON II Film 3412 are panchromatic, black-and-white aerial camera films with extended red sensitivity and intermediate speed. Both
More informationDC Film Capacitors MKT Radial Potted Type
DC Film Capacitors MKT Radial Potted Type MKT80 FEATURES AEC-Q00 qualified (rev. D) for PCM. mm (for larger available components on request) High temperature capabilities, up to 0 C Capacitance up to 60
More informationImpregnating Machine
Impregnating Machine Dasan Engineering manufactured Resin Coating & Laminating Machine for composite material and insulating material in addition to Impregnating & drying machine by means of high efficiency
More informationCHESTERFLEX ROOF WATERPROOFING MEMBRANES
CI/SfB (47) Ln2 Chesterfelt Ltd CHESTERFLEX ROOF WATERPROOFING MEMBRANES Certificate No 94/3062 DETAIL SHEET 2 Product THIS DETAIL SHEET RELATES TO CHESTERFLEX ROOF WATERPROOFING MEMBRANES, POLYESTER REINFORCED
More informationEngineering Plastics Technical Presentation
Engineering Plastics Technical Presentation Product Overview TAROMID A PA resin Available in different grades, UV and heat stabilized, glass fibres reinforced (also high impact), with glass beads, mineral
More information1 POLE - 16A / Inrush 120A relay. (a) Relay type FTR-K1 : FTR-K1 Series (b) Contact configuration A : 1 form A C : 1 form C
FTR-K1 SERIES POWER RELAY 1 POLE - 16A / Inrush 120A relay FTR-K1-KS Series FEATURES 1 pole 16A, 1 form A or 1 form C Peak inrush current 120A / TV-8 Coil power 400mW High insulation in small package (between
More informationSMD High Power Precision Resistors
Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Choice of packages Stable high frequency performance Temperature range -55 C to +155 C Applications Communications
More informationDot matrix Label ID Products. C Vinyl cloth labels. Dot Matrix. Features and benefits. Part numbering system
Dot Matrix C Vinyl cloth labels Tyco Electronics C is a dot matrix printable vinyl coated cloth material with a permanent acrylic adhesive that is designed for application to irregular surfaces where conformability
More informationOil Spill Cleanup Garment Options
Oil Spill Cleanup Garment Options DuPont Protection Technologies July 1, 2010 2 Oil Spill Nature of the Hazard Activities Boom Handling Equipment Maintenance Care of Wildlife Shoreline cleanup Skin Contact
More informationTECHNICAL DATA SHEET GRILON BG-15 S
TECHNICAL DATA SHEET GRILON BG-1 S Grilon BG-1 S is a heat stabilised PA6 injection moulding grade with 1% glass fibres. Grilon BG-1 S has the following important properties: Excellent surface finish Easy
More informationBRADY B-477 THERMAL TRANSFER PRINTABLE GLOSSY WHITE STATIC DISSIPATIVE POLYIMIDE LABEL STOCK
Technical Data Sheet BRADY B-477 THERMAL TRANSFER PRINTABLE GLOSSY WHITE STATIC DISSIPATIVE POLYIMIDE LABEL STOCK TDS No. B-477 Effective Date: 07-Jul-2010 Description: GENERAL Print Technology: Thermal
More informationHigh-Performance Polymers for. Automotive E/E Systems SPECIALTY
High-Performance Polymers for Automotive E/E Systems SPECIALTY POLYMERS Get Connected with Solvay Solvay offers the industry s broadest selection of high-performance plastics for automotive electrical/electronic
More informationreferenceguide Reference Guide for Pressure-Sensitive Adhesive Tapes great to work with
referenceguide Reference Guide for Pressure-Sensitive Adhesive Tapes referenceguide Table of Contents Tapeology 1-5 What is a pressure-sensitive tape? 1 What are the different components of a tape? 1 How
More informationPOWER RELAY. JV Series. 1 POLE - 5A/10A Medium Load Control FTR-K1 SERIES FEATURES
FTR-K1 SERIES POWER RELAY 1 POLE - 5A/10A Medium Load Control JV Series FEATURES UL, CSA, VDE, SEMKO, CQC recognized UL class B (130 C) wire class Low profile and space saving - Height: 12.5 mm - Mounting
More information