httpd Apache Web Server

Transcription

1 Chapter 36 httpd Apache Web Server In this chapter, we will show how to set up a web server running virtual domains and dynamic CGI web pages. HTML is not covered, and you are expected to have some understanding of what HTML is, or at least where to find documentation about it Web Server Basics In Section 26.2 we showed a simple HTTP session with the telnet command. A web server is really nothing more than a program that reads a file from the hard disk whenever a GET /<filename>.html HTTP/1.0 request comes in on port 80. Here, we will show a simple web server written in shell script. &Not by me. The author did not put his name in the source, so if you are out there, please drop me an .- You will need to add the line www stream tcp nowait nobody /usr/local/sbin/sh-httpd to your /etc/inetd.conf file. If you are running xinetd, then you will need to add a file containing service www { socket_type = stream wait = no 5 user = nobody } server = /usr/local/sbin/sh-httpd to your /etc/xinetd.d/ directory. Then, you must stop any already running web servers and restart inetd (or xinetd). 389

2 36.1. Web Server Basics 36. httpd Apache Web Server You will also have to create a log file (/usr/local/var/log/sh-httpd.log) and at least one web page (/usr/local/var/sh-www/index.html) for your server to serve. It can contain, say: <HTML> <HEAD> <TITLE>My First Document</TITLE> </HEAD> 5 <BODY bgcolor=#cccccc text="#000000"> This is my first document<p> Please visit <A HREF=" The Rute Home Page 10 </A> for more info.</p> </BODY> </HTML> Note that the server runs as nobody, so the log file must be writable by the nobody user, and the index.html file must be readable. Also note the use of the getpeername command, which can be changed to PEER="" if you do not have the netpipes package installed. &I am not completely sure if other commands used here are unavailable on other UNIX systems.-. #!/bin/sh VERSION=0.1 NAME="ShellHTTPD" DEFCONTENT="text/html" 5 DOCROOT=/usr/local/var/sh-www DEFINDEX=index.html LOGFILE=/usr/local/var/log/sh-httpd.log log() { 10 local REMOTE_HOST=$1 local REFERRER=$2 local CODE=$3 local SIZE=$4 15 echo "$REMOTE_HOST $REFERRER - [$REQ_DATE] \ \"${REQUEST}\" ${CODE} ${SIZE}" >> ${LOGFILE} } print_header() { 20 echo -e "HTTP/ OK\r" echo -e "Server: ${NAME}/${VERSION}\r" echo -e "Date: date \r" } 25 print_error() { echo -e "HTTP/1.0 $1 $2\r" 390

3 36. httpd Apache Web Server Web Server Basics echo -e "Content-type: $DEFCONTENT\r" echo -e "Connection: close\r" echo -e "Date: date \r" 30 echo -e "\r" echo -e "$2\r" exit 1 } 35 guess_content_type() { local FILE=$1 local CONTENT case ${FILE##*.} in 40 html) CONTENT=$DEFCONTENT ;; gz) CONTENT=application/x-gzip ;; *) CONTENT=application/octet-stream ;; esac 45 echo -e "Content-type: $CONTENT" } do_get() { local DIR 50 local NURL local LEN if [! -d $DOCROOT ]; then log ${PEER} print_error 404 "No such file or directory" fi if [ -z "${URL##*/}" ]; then URL=${URL}${DEFINDEX} 60 fi DIR=" dirname $URL " if [! -d ${DOCROOT}/${DIR} ]; then log ${PEER} print_error 404 "Directory not found" else cd ${DOCROOT}/${DIR} NURL=" pwd / basename ${URL} " URL=${NURL} 70 fi if [! -f ${URL} ]; then log ${PEER} print_error 404 "Document not found" 75 fi print_header guess_content_type ${URL} LEN=" ls -l ${URL} tr -s cut -d -f 5 " 80 echo -e "Content-length: $LEN\r\n\r" log ${PEER} ${LEN} 391

4 36.1. Web Server Basics 36. httpd Apache Web Server 85 } cat ${URL} sleep 3 read_request() { local DIRT local COMMAND 90 read REQUEST read DIRT REQ_DATE=" date +"%d/%b/%y:%h:%m:%s %z" " REQUEST=" echo ${REQUEST} tr -s [:blank:] " 95 COMMAND=" echo ${REQUEST} cut -d -f 1 " URL=" echo ${REQUEST} cut -d -f 2 " PROTOCOL=" echo ${REQUEST} cut -d -f 3 " case $COMMAND in 100 HEAD) print_error 501 "Not implemented (yet)" ;; GET) do_get 105 ;; *) print_error 501 "Not Implemented" ;; esac 110 } # # It was supposed to be clean - without any non-standard utilities # but I want some logging where the connections come from, so 115 # I use just this one utility to get the peer address # # This is from the netpipes package PEER=" getpeername cut -d -f 1 " 120 read_request exit 0 Now run telnet localhost 80, as in Section If that works and your log files are being properly appended (use tail -f... ), you can try to connect to with a web browser like Netscape. Notice also that the command getsockname (which tells you which of your own IP addresses the remote client connected to) could allow the script to serve pages from a different directory for each IP address. This is virtual domains in a nutshell. &Groovy, baby, I m in a giant nutshell... how do I get out?- 392

5 36. httpd Apache Web Server Installing and Configuring Apache 36.2 Installing and Configuring Apache Because all distributions package Apache in a different way, here I assume Apache to have been installed from its source tree, rather than from a.deb or.rpm package. You can refer to Section 24.1 on how to install Apache from its source.tar.gz file like any other GNU package. (You can even install it under Windows, Windows NT, or OS/2.) The source tree is, of course, available from The Apache Home Page Here I assume you have installed it in -- prefix=/opt/apache/. In the process, Apache will have dumped a huge reference manual into /opt/apache/htdocs/manual/ Sample httpd.conf Apache has several legacy configuration files: access.conf and srm.conf are two of them. These files are now deprecated and should be left empty. A single configuration file /opt/apache/conf/httpd.conf may contain at minimum: ServerType standalone ServerRoot "/opt/apache" PidFile /opt/apache/logs/httpd.pid ScoreBoardFile /opt/apache/logs/httpd.scoreboard 5 Port 80 User nobody Group nobody HostnameLookups Off ServerAdmin [email protected] 10 UseCanonicalName On ServerSignature On DefaultType text/plain ErrorLog /opt/apache/logs/error_log LogLevel warn 15 LogFormat "%h %l %u %t \"%r\" %>s %b" common CustomLog /opt/apache/logs/access_log common DocumentRoot "/opt/apache/htdocs" DirectoryIndex index.html AccessFileName.htaccess 20 <Directory /> Options FollowSymLinks AllowOverride None Order Deny,Allow Deny from All 25 </Directory> <Files "ˆ\.ht"> Order allow,deny Deny from all </Files> 30 <Directory "/opt/apache/htdocs"> Options Indexes FollowSymLinks MultiViews AllowOverride All 393

6 36.2. Installing and Configuring Apache 36. httpd Apache Web Server Order allow,deny Allow from all 35 </Directory> <Directory "/opt/apache/htdocs/home/*/www"> Options Indexes MultiViews AllowOverride None Order allow,deny 40 Allow from all </Directory> UserDir /opt/apache/htdocs/home/*/www With the config file ready, you can move the index.html file above to /opt/apache/htdocs/. You will notice the complete Apache manual and a demo page already installed there; you can move them to another directory for the time being. Now run /opt/apache/bin/httpd -X and then point your web browser to as before Common directives Here is a description of the options. Each option is called a directive in Apache terminology. A complete list of basic directives is in the file /opt/apache/htdocs/manual/mod/core.html. ServerType As discussed in Section 29.2, some services can run standalone or from inetd (or xinetd). This directive can be exactly standalone or inetd. If you choose inetd, you will need to add an appropriate line into your inetd configuration, although a web server should almost certainly choose standalone mode. ServerRoot This is the directory superstructure&see page under which Apache is installed. It will always be the same as the value passed to --prefix=. PidFile Many system services store the process ID in a file for shutdown and monitoring purposes. On most distributions, the file is /var/run/httpd.pid. ScoreBoardFile This option is used for communication between Apache parent and child processes on some non-unix systems. Port This is the TCP port for standalone servers to listen on. User, Group This option is important for security. It forces httpd to user nobody privileges. If the web server is ever hacked, the attack will not be able to gain more than the privileges of the nobody user. 394

7 36. httpd Apache Web Server Installing and Configuring Apache HostnameLookups To force a reverse DNS lookup on every connecting host, set this directive to on. To force a forward lookup on every reverse lookup, set this to double. This option is for logging purposes since access control does a reverse and forward reverse lookup anyway if required. It should certainly be off if you want to reduce latency. ServerAdmin Error messages include this address. UseCanonicalName If Apache has to return a URL for any reason, it will normally return the full name of the server. Setting to off uses the very host name sent by the client. ServerSignature Add the server name to HTML error messages. DefaultType All files returned to the client have a type field specifying how the file should be displayed. If Apache cannot deduce the type, it assumes the MIME Type to be text/plain. See Section for a discussion of MIME types. ErrorLog Where errors get logged, usually /var/log/httpd/error log LogLevel How much info to log. LogFormat Define a new log format. Here we defined a log format and call it common. Multiple lines are allowed. Lots of interesting information can actually be logged: See /opt/apache/htdocs/manual/mod/mod log config.html for a full description. CustomLog The log file name and its (previously defined) format. DocumentRoot This directive specifies the top-level directory that client connections will see. The string /opt/apache/htdocs/ is prepended to any file lookup, and hence a URL will return the file /opt/apache/htdocs/manual/index.html.en. DirectoryIndex This directive gives the default file to try serve for URLs that contain only a directory name. If a file index.html does not exist under that directory, an index of the directory is sent to the client. Other common configurations use index.htm or default.html. AccessFileName Before serving a file to a client, Apache reads additional directives from a file.htaccess in the same directory as the requested file. If a parent directory contains a.htaccess instead, this one will take priority. The.htaccess file contains directives that limit access to the directory, as discussed below. The above is merely the general configuration of Apache. To actually serve pages, you need to define directories, each with a particular purpose, containing particular HTML or graphic files. The Apache configuration file is very much like an HTML document. Sections are started with <section parameter> and ended with </section>. 395

8 36.2. Installing and Configuring Apache 36. httpd Apache Web Server The most common directive of this sort is <Directory /directory> which does such directory definition. Before defining any directories, we need to limit access to the root directory. This control is critical for security. <Directory /> Options FollowSymLinks Deny from All Order Deny,Allow 5 AllowOverride None </Directory> This configuration tells Apache about the root directory, giving clients very restrictive access to it. The directives are &Some of these are extracted from the Apache manual.-: Options The Options directive controls which server features are available in a particular directory. There is also the syntax +option or -option to include the options of the parent directory, for example, Options +FollowSymLinks -Indexes. FollowSymLinks The server will follow any symbolic links beneath the directory. Be careful about what symbolic links you have beneath directories with FollowSymLinks. You can, for example, give everyone access to the root directory by having a link../../../ under htdocs not what you want. ExecCGI Execution of CGI scripts is permitted. Includes Server-side includes are permitted (more on this later). IncludesNOEXEC Server-side includes are permitted, but the #exec command and #include of CGI scripts are disabled. Indexes If a client asks for a directory by name and no index.html file (or whatever DirectoryIndex file you specified) is present, then a pretty listing of the contents of that directory is created and returned. For security you may want to turn this option off. MultiViews Content-negotiated MultiViews are allowed (more on this later). SymLinksIfOwnerMatch The server will only follow symbolic links for which the target file or directory is owned by the same user ID as the link (more on this later). All All options except for MultiViews. This is the default setting. Deny Hosts that are not allowed to connect. You can specify a host name or IP address, for example, as: Deny from Deny from /24 Deny from cranzgot.co.za 396

9 36. httpd Apache Web Server Installing and Configuring Apache which will deny access to , all hosts beginning with , and all hosts ending in.cranzgot.co.za, including the host cranzgot.co.za. Allow Hosts that are allowed to connect. This directive uses the same syntax as Deny. Order If order is Deny,Allow, then the Deny directives are checked first and any client that does not match a Deny directive or does match an Allow directive will be allowed access to the server. If order is Allow,Deny, then the Allow directives are checked first and any client that does not match an Allow directive or does match a Deny directive will be denied access to the server. AllowOverride In addition to the directives specified here, additional directives will be read from the file specified by AccessFileName, usually called.htaccess. This file would usually exist alongside your.html files or otherwise in a parent directory. If the file exists, its contents are read into the current <Directory... > directive. AllowOverride says what directives the.htaccess file is allowed to squash. The complete list can be found in /opt/apache/htdocs/manual/mod/core.html. You can see that we give very restrictive Options to the root directory, as well as very restrictive access. The only server feature we allow is FollowSymLinks, then we Deny any access, and then we remove the possibility that a.htaccess file could override our restrictions. The <Files... > directive sets restrictions on all files matching a particular regular expression. As a security measure, we use it to prevent access to all.htaccess files as follows: <Files "ˆ\.ht"> Order allow,deny Deny from all </Files> We are now finally ready to add actual web page directories. These take a less restrictive set of access controls: <Directory "/opt/apache/htdocs"> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny 5 Allow from all </Directory> 397

10 36.2. Installing and Configuring Apache 36. httpd Apache Web Server User HTML directories Our users may require that Apache know about their private web page directories /www/. This is easy to support with the special UserDir directive: <Directory "/opt/apache/htdocs/home/*/www"> Options Indexes MultiViews AllowOverride None Order allow,deny 5 Allow from all </Directory> UserDir /opt/apache/htdocs/home/*/www For this feature to work, you must symlink /opt/apache/htdocs/home to /home, and create a directory www/ under each user s home directory. Hitting the URL jack/index.html will then retrieve the file /opt/apache/htdocs/home/jack/www/index.html. You will find that Apache gives a Forbidden error message when you try to do this. This is probably because jack s home directory s permissions are too restrictive. Your choices vary between now making jack s home directory less restricted or increasing the privileges of Apache. Running Apache under the www group by using Group www, and then running groupadd -g 65 www chown jack:www /home/jack /home/jack/www chmod 0750 /home/jack /home/jack/www is a reasonable compromise Aliasing Sometimes, HTML documents will want to refer to a file or graphic by using a simple prefix, rather than a long directory name. Other times, you want two different references to source the same file. The Alias directive creates virtual links between directories. For example, adding the following line, means that a URL /icons/bomb.gif will serve the file /opt/apache/icons/bomb.gif: Alias /icons/ "/opt/apache/icons/" We do, of course, need to tell Apache about this directory: <Directory "/opt/apache/icons"> Options None AllowOverride None Order allow,deny 398

11 36. httpd Apache Web Server Installing and Configuring Apache 5 Allow from all </Directory> Fancy indexes You will find the directory lists generated by the preceding configuration rather bland. The directive IndexOptions FancyIndexing causes nice descriptive icons to be printed to the left of the file name. What icons match what file types is a trick issue. You can start with: AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip AddIconByType (TXT,/icons/text.gif) text/* AddIconByType (IMG,/icons/image2.gif) image/* AddIconByType (SND,/icons/sound2.gif) audio/* 5 AddIconByType (VID,/icons/movie.gif) video/* AddIcon /icons/compressed.gif.z.z.tgz.gz.zip AddIcon /icons/a.gif.ps.eps AddIcon /icons/layout.gif.html.shtml.htm This requires the Alias directive above to be present. The default Apache configuration contains a far more extensive map of file types Encoding and language negotiation You can get Apache to serve gzipped files with this: AddEncoding x-compress Z AddEncoding x-gzip gz Now if a client requests a file index.html, but only a file index.html.gz exists, Apache decompresses it on-the-fly. Note that you must have the MultiViews options enabled. The next options cause Apache to serve index.html.language-code when index.html is requested, filling in the preferred language code sent by the web browser. Adding these directives causes your Apache manual to display correctly and will properly show documents that have non-english translations. Here also, the MultiViews must be present. AddLanguage en.en 399

12 36.2. Installing and Configuring Apache 36. httpd Apache Web Server AddLanguage da.dk AddLanguage nl.nl AddLanguage et.ee 5 AddLanguage fr.fr AddLanguage de.de AddLanguage el.el AddLanguage ja.ja AddLanguage ru.ru 10 LanguagePriority en da nl et fr de el ja ru The LanguagePriority directive indicates the preferred language if the browser did not specify any. Some files might contain a.koi8-r extension, indicating a Russian character set encoding for this file. Many languages have such custom character sets. Russian files are named webpage.html.ru.koi8-r. Apache must tell the web browser about the encoding type, based on the extension. Here are directives for Japanese, Russian, and UTF-8 &UTF-8 is a Unicode character set encoding useful for any language.-, as follows: AddCharset ISO-2022-JP.jis AddCharset KOI8-R.koi8-r AddCharset UTF-8.utf8 Once again, the default Apache configuration contains a far more extensive map of languages and character sets Server-side includes SSI Apache actually has a built-in programming language that interprets.shtml files as scripts. The output of such a script is returned to the client. Most of a typical.shtml file will be ordinary HTML, which will be served unmodified. However, lines like  will be interpreted, and their output included into the HTML hence the name serverside includes. Server-side includes are ideal for HTML pages that contain mostly static HTML with small bits of dynamic content. To demonstrate, add the following to your httpd.conf: AddType text/html.shtml AddHandler server-parsed.shtml <Directory "/opt/apache/htdocs/ssi"> Options Includes 5 AllowOverride None Order allow,deny 400

13 36. httpd Apache Web Server Installing and Configuring Apache Allow from all </Directory> Create a directory /opt/apache/htdocs/ssi with the index file index.shtml: <HTML> The date today is .<P> Here is a directory listing:<br> <PRE> 5  </PRE>  </HTML> and then a file footer.html containing anything you like. It is obvious how useful this procedure is for creating many documents with the same banner by means of a #include statement. If you are wondering what other variables you can print besides DATE LOCAL, try the following: <HTML> <PRE>  </PRE> 5 </HTML> You can also goto to see some other examples CGI Common Gateway Interface (I have actually never managed to figure out why CGI is called CGI.) CGI is where a URL points to a script. What comes up in your browser is the output of the script (were it to be executed) instead of the contents of the script itself. To try this, create a file /opt/apache/htdocs/test.cgi: #!/bin/sh echo Content-type: text/html echo 5 echo <HTML> echo <HEAD> echo <TITLE>My First CGI</TITLE> echo </HEAD> echo <BODY bgcolor=#cccccc text="#000000"> 10 echo This is my first CGI<P> echo Please visit 401

14 36.2. Installing and Configuring Apache 36. httpd Apache Web Server echo echo echo <A HREF=" The Rute Home Page </A> 15 echo for more info.</p> echo </BODY> echo </HTML> Make this script executable with chmod a+x test.cgi and test the output by running it on the command-line. Add the line AddHandler cgi-script.cgi to your httpd.conf file. Next, modify your Options for the directory /opt/apache/htdocs to include ExecCGI, like this: <Directory "/opt/apache/htdocs"> Options Indexes FollowSymLinks MultiViews ExecCGI AllowOverride All Order allow,deny 5 Allow from all </Directory> After restarting Apache you should be able to visit the URL If you run into problems, don t forget to run tail /opt/apache/logs/error log to get a full report. To get a full list of environment variables available to your CGI program, try the following script: #!/bin/sh echo Content-type: text/html echo 5 echo <HTML> echo <PRE> set echo </PRE> echo </HTML> The script will show ordinary bash environment variables as well as more interesting variables like QUERY STRING: Change your script to #!/bin/sh echo Content-type: text/html echo 402

15 36. httpd Apache Web Server Installing and Configuring Apache 5 echo <HTML> echo <PRE> echo $QUERY_STRING echo </PRE> echo </HTML> 5 and then go to the URL It is easy to see how variables can be passed to the shell script. The preceding example is not very interesting. However, it gets useful when scripts have complex logic or can access information that Apache can t access on its own. In Chapter 38 we see how to deploy an SQL database. When you have covered SQL, you can come back here and replace your CGI script with, #!/bin/sh echo Content-type: text/html echo psql -d template1 -H -c "SELECT * FROM pg_tables;" This script will dump the table list of the template1 database if it exists. Apache will have to run as a user that can access this database, which means changing User nobody to User postgres. &Note that for security you should really limit who can connect to the postgres database. See Section Forms and CGI To create a functional form, use the HTTP <FORM> tag as follows. A file /opt/apache/htdocs/test/form.html could contain: <HTML> <FORM name="myform" action="test.cgi" method="get"> <TABLE> <TR> 5 <TD colspan="2" align="center"> Please enter your personal details: </TD> </TR> <TR> 10 <TD>Name:</TD><TD><INPUT type="text" name="name"></td> </TR> <TR> <TD> </TD><TD><INPUT type="text" name=" "></td> </TR> 15 <TR> 403

16 36.2. Installing and Configuring Apache 36. httpd Apache Web Server <TD>Tel:</TD><TD><INPUT type="text" name="tel"></td> </TR> <TR> <TD colspan="2" align="center"> 20 <INPUT type="submit" value="submit"> </TD> </TR> </TABLE> </FORM> 25 </HTML> which looks like: Note how this form calls our existing test.cgi script. Here is a script that adds the entered data to a postgres SQL table: #!/bin/sh echo Content-type: text/html echo 5 opts= echo "$QUERY_STRING" \ sed -e s/[ˆa-za-z0-9 %&+,.\/:=@_ -]//g -e s/&/ /g -e q for opt in $opts ; do 10 case $opt in name=*) name=${opt/name=/} ;; =*) 15 =${opt/ =/} ;; tel=*) tel=${opt/tel=/} ;; 20 esac 404

17 36. httpd Apache Web Server Installing and Configuring Apache done if psql -d template1 -H -c "\ INSERT INTO people (name, , tel) \ 25 VALUES ( $name, $ , $tel )" 2>&1 grep -q ˆINSERT ; then echo "<HTML>Your details \"$name\", \"$ \" and \"$tel\"<br>" echo "have been succesfully recorded.</html>" else echo "<HTML>Database error, please contact our webmaster.</html>" 30 fi exit 0 Note how the first lines of script remove all unwanted characters from QUERY STRING. Such processing is imperative for security because shell scripts can easily execute commands should characters like $ and be present in a string. To use the alternative POST method, change your FORM tag to <FORM name="myform" action="test.cgi" method="post"> The POST method sends the query text through stdin of the CGI script. Hence, you need to also change your opts= line to opts= cat \ sed -e s/[ˆa-za-z0-9 %&+,.\/:=@_ -]//g -e s/&/ /g -e q Setuid CGIs Running Apache as a privileged user has security implications. Another way to get this script to execute as user postgres is to create a setuid binary. To do this, create a file test.cgi by compiling the following C program similar to that in Section #include <unistd.h> int main (int argc, char *argv[]) { 5 setreuid (geteuid (), geteuid ()); execl ("/opt/apache/htdocs/test/test.sh", "test.sh", 0); return 0; } 405

18 36.2. Installing and Configuring Apache 36. httpd Apache Web Server Then run chown postgres:www test.cgi and chmod a-w,o-rx,u+s test.cgi (or chmod 4550 test.cgi). Recreate your shell script as test.sh and go to the URL again. Apache runs test.cgi, which becomes user postgres, and then executes the script as the postgres user. Even with Apache as User nobody your script will still work. Note how your setuid program is insecure: it takes no arguments and performs only a single function, but it takes environment variables (or input from stdin) that could influence its functionality. If a login user could execute the script, that user could send data via these variables that could cause the script to behave in an unforeseen way. An alternative is: #include <unistd.h> int main (int argc, char *argv[]) { 5 char *envir[] = {0}; setreuid (geteuid (), geteuid ()); execle ("/opt/apache/htdocs/test/test.sh", "test.sh", 0, envir); return 0; } This script nullifies the environment before starting the CGI, thus forcing you to use the POST method only. Because the only information that can be passed to the script is a single line of text (through the -e q option to sed) and because that line of text is carefully stripped of unwanted characters, we can be much more certain of security Apache modules and PHP CGI execution is extremely slow if Apache has to invoke a shell script for each hit. Apache has a number of facilities for built-in interpreters that will parse script files with high efficiency. A well-known programming language developed specifically for the Web is PHP. PHP can be downloaded as source from The PHP Home Page and contains the usual GNU installation instructions. Apache has the facility for adding functionality at runtime using what it calls DSO (Dynamic Shared Object) files. This feature is for distribution vendors who want to ship split installs of Apache that enable users to install only the parts of Apache they like. This is conceptually the same as what we saw in Section 23.1: To give your program some extra feature provided by some library, you can either statically link the library to your program or compile the library as a shared.so file to be linked at run time. The difference here is that the library files are (usually) called mod name and are stored in /opt/apache/libexec/. They are also only loaded if a Load- Module name module appears in httpd.conf. To enable DSO support, rebuild and reinstall Apache starting with:./configure --prefix=/opt/apache --enable-module=so 406

19 36. httpd Apache Web Server Installing and Configuring Apache Any source package that creates an Apache module can now use the Apache utility /opt/apache/bin/apxs to tell it about the current Apache installation, so you should make sure this executable is in your PATH. You can now follow the instructions for installing PHP, possibly beginning with./configure --prefix=/opt/php --with-apxs=/opt/apache/bin/apxs --with-pgsql=/usr. (This assumes that you want to enable support for the postgres SQL database and have postgres previously installed as a package under /usr.) Finally, check that a file libphp4.so eventually ends up in /opt/apache/libexec/. Your httpd.conf then needs to know about PHP scripts. Add the following lines LoadModule php4_module /opt/apache/libexec/libphp4.so AddModule mod_php4.c AddType application/x-httpd-php.php and then create a file /opt/apache/htdocs/hello.php containing <html> <head> <title>example</title> </head> 5 <body> <?php echo "Hi, I m a PHP script!";?> </body> </html> and test by visiting the URL Programming in the PHP language is beyond the scope of this book Virtual hosts Virtual hosting is the use of a single web server to serve the web pages of multiple domains. Although the web browser seems to be connecting to a web site that is an isolated entity, that web site may in fact be hosted alongside many others on the same machine. Virtual hosting is rather trivial to configure. Let us say that we have three domains: and We want domains and to share IP address , while has its own IP address of The sharing of a single IP address is called name-based virtual hosting, and the use of a different IP address for each domain is called IP-based virtual hosting. 407

20 36.2. Installing and Configuring Apache 36. httpd Apache Web Server If our machine has one IP address, , we may need to configure a separate IP address on the same network card as follows (see Section 25.9): ifconfig eth0: netmask up For each domain /opt/apache/htdocs/ we now create a top-level directory. We need to tell Apache that we intend to use the IP address for several hosts. We do that with the NameVirtualHost directive. Then for each host, we must specify a top-level directory as follows: NameVirtualHost <VirtualHost > ServerName 5 DocumentRoot /opt/apache/htdocs/ </VirtualHost> <VirtualHost > ServerName 10 DocumentRoot /opt/apache/htdocs/ </VirtualHost> <VirtualHost > ServerName 15 DocumentRoot /opt/apache/htdocs/ </VirtualHost> All that remains is to configure a correct DNS zone for each domain so that lookups of and return while lookups of return You can then add index.html files to each directory. 408