Setting up an Apache Web Server for Greenstone 2 Walkthrough

Transcription

1 Setting up an Apache Web Server for Greenstone 2 Walkthrough From GreenstoneWiki Setting up an Apache web server to work with Greenstone 2: [edit] #Installing the Apache web server on Linux and MacOS (Leopard) #Installing the Apache web server on Windows Installing the Apache web server on Linux and MacOS (Leopard) A walkthrough for Linux on how to set up Apache's httpd web server for Greenstone v2.80. The following should hopefully work with other releases of the Apache's HTTP Server as well. Notes: commands to be typed in a Linux x-term prompt are indicated with $ 1. Downloading and verifying Download the current httpd tar.gz file from e.g. You can go to the mirror site and download tar.gz version of httpd To verify you have an uncorrupted copy of the downloaded file <httpd-version.tar.gz>, you need to download the <httpd-version>.tar.gz.asc file and the KEYS file. For example: o the KEYS file from and o the httpd2.2.8.tar.gz.asc from Now, to verify your download, open an x-term and do as described at For example: $ gpg --import KEYS $ gpg --verify <httpd version file name>tar.gz.asc 2. Extracting If you've verified it, extract the contents of the download where you want it: $ tar -xvzf httpd2.2.8.tar.gz 3. Installing by compiling Now the folder httpd2.2.8 is created. CD into this folder. Inside this folder, there's a README file which points one to the INSTALL file for installation instructions. The following comes from there. First choose the directory where you want to install your apache web server. In the following, PREFIX is the full path to where it will reside. 4. $./configure --prefix=prefix

2 5. $ make 6. $ make install For example, PREFIX might be /home/myname/gs2/apache (no quotes!). In this case, we would do: $./configure --prefix=/home/myname/gs2/apache $ make $ make install 7. Configuring the server and port Go into your PREFIX folder again (the "apache" folder where you installed the web server). Locate and open the httpd.conf configuration file for editing. That is, open PREFIX/conf/httpd.conf: o Add your host server's name in the ServerName section (make sure any other ServerName values are commented out): ServerName <my.fullservername.location.com> o Add the port you want your web server to be listening at in the Listen section. Choose a port number that is not in already in use.: Listen Running (starting) and stopping the server To run, type the following in the exterm: $ PREFIX/bin/apachectl start To stop it: $ PREFIX/bin/apachectl stop If you need to stop then start it up again, you can do both steps in one go: $ PREFIX/bin/apachectl restart Running start, stop and restart also works if you're in the PREFIX/bin folder by:./apachectl start./apachectl stop./apachectl restart For instance, we might do the following to start it using our example prefix: $ /home/myname/gs2/apache/bin>./apachectl start 9. Testing that the web server runs Open a browser at (replace with the values you specified for ServerName and port number in the web server configuration file httpd.conf) and it should work. You will know, if a page loads with the message "It Works!" or some other confirmation message. 10. Some reading on your part: If you installed a Binary distribution of Greenstone 2 (GS2), then the installation wizard would

3 have displayed some information with script code on how to set up the web server for GS2: (In the following, $GSDLHOME is the full path to your greenstone installation folder, usually gsdl.) To use the Greenstone Web Library you will need to have a webserver installed (you'll also need perl if you want to build your own collections). The following information is intended to help you configure your webserver for use with Greenstone. Particular attention is given to the Apache webserver which may be downloaded free from Greenstone will work with other webservers too if that is your preference. To refer back to this information later you can find it in the file $GSDLHOME/library.txt Greenstone has been set up to expect $GSDLHOME/GS2 to be accessible from your webserver at the URL (localhost will of course be the usual web address of your machine if it has one). Likewise, the $GSDLHOME/cgi-bin directory must be accessible as a cgi executable directory. For the Apache webserver this means adding the following directives to your httpd.conf configuration file: ScriptAlias /gsdl/cgi-bin "$GSDLHOME/cgi-bin" <Directory "$GSDLHOME/cgi-bin"> Options None AllowOverride None </Directory> Alias /gsdl "$GSDLHOME" <Directory "$GSDLHOME"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order allow,deny Allow from all </Directory> Once your webserver is configured in this way you can access Greenstone by pointing your web browser at or For more information on installing and configuring a webserver see the Greenstone Installer's guide. The above is given in the Greenstone 2 installation wizard. We're going to use it now: 11. Setting up the apache web server for Greenstone 2 Open up the httpd.conf file again. It's in your web server installation's conf folder, i.e. PREFIX/conf/httpd.conf. Append the following at the end, making sure to replace $GSDLHOME with the full path to your Greenstone 2 installation folder (usually the GS2 folder's called gsdl): 12. ScriptAlias /gsdl/cgi-bin "$GSDLHOME/cgi-bin" 13. <Directory "$GSDLHOME/cgi-bin"> 14. Options None 15. AllowOverride None 16. </Directory> Alias /gsdl "$GSDLHOME" 19. <Directory "$GSDLHOME"> 20. Options Indexes MultiViews FollowSymLinks 21. AllowOverride None

4 22. Order allow,deny 23. Allow from all 24. </Directory> 25. If you haven't done so already, open up the file $GSDLHOME/cgi-bin/gsdlsite.cfg, and o Change: gsdlhome **GSDLHOME** to the full path of $GSDLHOME (you can put it in quotes, try this especially if your path contains spaces): gsdlhome "/full/path/" o Uncomment: #httpprefix /gsdl (Make sure that the prefix is the same as the alias registered with your web server.) httpprefix /gsdl o And adjust: "httpimg /images" to (Make sure that the prefix is the same as the alias registered with your web server.) httpimg /gsdl/images [edit] 26. Viewing pages served by Greenstone 2 in your browser Open the browser again at And now you can hopefully see the main page for Greenstone 2. Installing the Apache web server on Windows A walkthrough for Windows on how to set up Apache's httpd web server for Greenstone 2. The following should hopefully work with other releases of the Apache HTTP Server as well. 1. Download the binary release of the Apache HTTP server for Windows. I got the "Win32 Binary without crypto (no mod_ssl) (MSI Installer)". 2. Double click on the downloaded file--for instance, this may be called apache_2.2.9-win32-x86- no_ssl-r2.msi--and go through the installation wizard. Choose "Typical installation". I accepted Port To start the server, open a DOS prompt and move into the Apache Software Foundation\Apache2.2\bin directory. Once there, type httpd.exe To stop it, the Apache HTTP Server online manual says opening a new DOS prompt, going to the Apache server's bin directory and typing the following should stop a running server: httpd.exe -k shutdown

5 However, this didn't work for me. You may need to type ctrl-c in the same prompt from where you ran httpd.exe instead. See here for more information. 4. Check the server is running by visiting localhost:8080 in a browser. It should show the message "It Works!" 5. Edit the file "Apache Software Foundation\Apache2.2\conf\httpd.conf" as follows. 1. Make it listen at port 8080 if this is not already set, by finding the "Listen" entry in the file: Listen Set the server name to be the name of your host machine by searching for the "ServerName" entry in the file. (More information can be found in the httpd.conf file where you're making these changes.) ServerName name-of-your-machine For example, if you're going to test the remote Greenstone server from the same machine-- that is, locally--then you can set this value to "localhost": ServerName localhost 3. At the end of the httpd.conf file, paste the following and replace $GSDLHOME with the full path to your greenstone 2 installation. Take care to use forward slashes this time, and leave the quote-marks intact where you find them in the following: 4. # Setting up the Apache webserver to work with Greenstone2 5. ScriptAlias /gsdl/cgi-bin "$GSDLHOME/cgi-bin" 6. <Directory $GSDLHOME/cgi-bin> 7. Options None 8. AllowOverride None 9. </Directory> Alias /gsdl "$GSDLHOME" 12. <Directory $GSDLHOME> 13. Options Indexes MultiViews FollowSymLinks 14. AllowOverride None 15. Order allow,deny 16. Allow from all 17. </Directory> Instead of "gsdl" in the aliases above, you could choose something else (like "gs2remote"), as long as you use it consistently and use the same in the following steps as well. 6. Edit the file gsdlsite.cfg located in your $GSDLHOME\cgi-bin as follows: 1. Change the GSDLHOME placeholder in the file to be the full path to your Greenstone2 installation. Use Windows style file separators this time (backslashes). For example C:\gsdl. 2. Uncomment the "httpprefix" entry to get httpprefix /gsdl Make sure the prefix is set to the same value as the alias you chose. 3. You may also need to adjust the "httpimg" entry to:

6 httpimg /gsdl/images Once again, make sure to use the script alias you'd chosen above. If the images do not display in the next step, then come back here and change this back to the way it was before. 7. Visit in your browser and hopefully you will now see Greenstone 2's main page. (Or, more generally: 8. On Windows, there is a local library server which often runs automatically when running the Greenstone Librarian Interface, GLI. To avoid this from interfering with the custom web server you have associated with Greenstone (the Apache web server just configured), you may want to tell it to not start automatically when running GLI. Make sure server.exe is not running. Go into your Greenstone2 installation directory. In there you will find either one or both of the following files: 1. gsdlsite.cfg 2. glisite.cfg If the glisite.cfg file is missing, make a copy of the gsdlsite.cfg file and rename the *copy* as glisite.cfg. Open glisite.cfg, and edit two lines: the line with the property "autoenter" and the line with the property "start_browser". Set both properties equal to 0 as follows: autoenter=0 start_browser=0 The above will prevent the local library server (server.exe) from being launched every time you launch GLI. You will also want to set the greenstone library path in GLI to connect to the correct web server when previewing collections. You do this in GLI, by going to File > Preferences > Connection tab and setting the value of the Greenstone Web Path field to (or