Evaluation of software tools supporting outcomes-based continuous program improvement processes

Transcription

1 Evaluation of software tools supporting outcomes-based continuous program improvement processes James Kaupp 1, Brian Frank 1 and Christopher Watts 2 1 Queen s University, 2 Dalhousie University [email protected] Abstract The Canadian engineering accreditation board (CEAB) mandate tasked each engineering program to assess student outcomes in the form of graduate attributes and develop a data-informed continuous program improvement stemming from those s. Administering, collecting and organizing the breadth data is an extensive process, typically centralized through the use of software tools such as management systems (LMS), content management systems (CMS), continuous program improvement systems (CPI). These systems serve a variety of roles, ranging from course content delivery, e-, distance education, outcomes, outcomes data management and outcomes analytics. Vendors have been developing various solutions to accommodate the shift towards outcomes based as part of a continuous improvement processes. This paper will compare and contrast software tools supporting outcomes based as part of a continuous improvement process such as elumen, Canvas, Moodle, WaypointOutcomes, Desire2Learn and LiveText. Keywords: outcomes analytics, Outcomes based, management software, Continuous improvement processes, change management processes 1. INTRODUCTION As Canadian engineering programs proceed with meeting the Canadian Engineering Accreditation Boards mandate of developing an outcomes-based, data-informed continuous improvement process, there have been many questions regarding hallmarks of effective processes. There is considerable research on how best to create and assess student outcomes[1]-[3]. However, there is less literature addressing using outcomes as part of CPI process despite considerable need for the investigation into best practices. The reports from the Wabash National Study[4]-[6] have provided a strong foundation and beginnings of best practices, but questions still remain. One of the foremost questions deals with the use of educational software tools to assist in the change management process of the CEAB accreditation mandate. Institutions must evaluate how these software tools can assist a sustainable outcomes based CPI process through the support of the collection,, management and analysis of outcomes data. This is a challenging endeavor, as considerable resources must be invested to the successful, sustainable, long-term adoption of a software tool[7]. If the software tool is adopted without sufficient support, internal championing or consideration to change management issues, then it is unlikely to develop into a sustainable, long-term practice[5], [6]. The current landscape of software tools for outcomes based CPI processes is diverse. There are many vendors that offer a multitude of products catering to a variety of needs. These solutions range from and/or content management systems, specialized tools, continuous program improvement solutions and integrative solutions that seek to supplement existing processes for outcomes and. The primary challenge is that little information exists which compares and contrasts the features and relative strengths of each solution. It is the purpose of this paper to present, compare and evaluate a variety of commercially and freely available software tools that support outcomes based as part of a CPI process. To that end, six software tools were evaluated: elumen, Canvas, Moodle, WaypointOutcomes, Desire2Learn, and LiveText. 2. EVALUATION METHOD The vendors for each software tool were contacted and asked to deliver a presentation regarding the strengths and contributions of their particular software tool. Presentations were directed towards outcomes based, data management, outcomes analytics and continuous program improvement capabilities. Wherever possible, a live demo or sandbox environment was requested to evaluate the system. Montreal, QC; June 17-20, of 8

2 Following the presentations, the software tools were classified by 3 independent criteria and evaluated by 4 independent criteria, illustrated below System Classification The evaluation element classifies the software tool by the following criteria: Table 1: System Classification Category Description management system. Capable of delivering LMS content and administration for course offerings. May offer integrated outcomes and analytics. content management system. Capable of creating and delivering content and managing grades for a multitude of courses. In addition can offer e- and distance L/CMS based courses, supports collaborative content, publishing elements, e-portfolios and facilitated content management. May offer integrated outcomes and analytics. Continuous program improvement tool. Capable of creating elements to evaluate, analyze and CPI report student performance in outcomes. Focuses on of select evidence for outcomes. Is not a platform for content creation or delivery 2.2. System Integration This evaluation element describes how the software tool is integrated with other educational technology, human resource systems and 3 rd party applications: Table 2: System Integration Category Description Tools Interoperability (LTI) ( A specification developed by IMS global to allow different LTI tools a way to interface with a variety of 3 rd party tools. LTI allows for a secure link to be created from a tool to another 3 rd party application. Application Programming Interface (API). A protocol intended to be used as an interface allowing API software tools to communicate with other 3 rd party applications. Custom interface or wizard developed to import or export Custom data into the software or 3 rd party application based Assessment This evaluation element focuses on the software tools use of rubrics in of student submissions. Ease of rubric creation, customization and storage for future use and sharing is considered. Table 3: -based Assessment Outcome 1 star 2 Stars 3 Stars generation is present but poorly generation is an implemented generation is excellently implemented. implemented. feature. User Allows for User interface is interface quick, easy Generation obscuring or requires creation and is confusing, requiring comprehensive training training prior to use. easily accessed. Customization Repository outcomes and levels can be customized but is poorly implemented, or customization is limited by imposed restraints. Created rubrics are available for future by a template structure. 2.4 Outcomes outcomes and levels can be customized according to user preference. Outcomes must be specified for each rubric element. Created rubrics are archived by specific course or department into a repository. Users can search for rubrics by specific text. Full customization of rubric outcomes and levels is possible and easily done. Outcomes can be added from repositories into rubrics. Created rubrics can be placed into a searchable repository available to all faculty or department members. This evaluation element focuses on the software tools use of student outcomes. It describes how be created in an institution and if be used at multiple levels (institution, faculty, department, course), if be mapped across the levels (outcomes curriculum mapping), if be linked to multiple instances, and if be archived into a searchable repository. Montreal, QC; June 17-20, of 8

3 Table 4: Outcomes Outcome 1 star 2 Stars 3 Stars Multi-level capability Multi-level mapping Multiinstance mapping Outcomes Repository be created and assessed at with limits or constraints. be mapped at with limited options. be assessed at with limits or constraints. 2.5 Assessment be archived or viewed at with limits or constraints to link to existing s. be created and assessed at (course, department, program, institution) be mapped to of with graphical or tabular options. be assessed in multiple instances across select levels. be archived in a repository available for select groups at specific levels to incorporate into s. outcomes can be created and assessed across all levels (course, department, program, institution) outcomes can be comprehensively mapped to all areas of across all levels, with a variety of options outcomes can be assessed in multiple instances or s across all levels outcomes can be archived in a searchable repository available for all levels to incorporate into rubrics and s. This evaluation element focuses on the systems capabilities. It describes at the types of student evidence used in, the capability of multiple assessors on submitted evidence, the efficiency of grading student submissions, and the ease and quality of the feedback that can be provided to the student. Table 5: Assessment Outcome 1 star 2 Stars 3 Stars Assessments can incorporate both Assessments can incorporate only direct and multiple sources Direct & incorporate indirect of both direct and Indirect multiple forms evidence of indirect evidence Evidence of evidence student of student and is thus very limited with certain limitations Multiple Assessors In-line grading In-line feedback 2.6 Analytics Assessments can be graded only by course personnel Grading can only be done outside the student submission via a grade-book or rubric elements The student submission can only be commented on offline via commenting text boxes Assessments can be graded by multiple assessors from a variety of assigned roles Grading can be done by within the student submission via selectable grades for rubric elements The student submission can be commented on in-line via a comment field. Comments can be added for rubric elements and the overall Assessments can be graded by multiple assessors as well as peer-based Grading can be done quickly inline with rubrics, while viewing the student submission The student submission can be marked-up and commented on in-line, providing rich feedback. Comments can be added for rubric elements and the overall. This evaluation element focuses on the systems outcomes analytic capabilities. It describes at the availability of across institutional levels (down to student level), the flexibility of both tabular and graphical, how on-demand the methods are, the flexibility of longitudinal methods and the ability to create custom groups (demographic or otherwise) for. Montreal, QC; June 17-20, of 8

4 Table 6: Analytics Outcome 1 star 2 Stars 3 Stars Multi-level outcomes are limited be run at select levels be run at any level Tabular Graphical Reporting On-demand Longitudinal Custom group 2.7 Pricing limited to a pre-defined table limited to a pre-defined graph limited. Longitudinal on limited customized groupings is limited be reported on in several predefined tabular formats be reported on in several predefined graphical formats be run only at specific time points or key s Longitudinal on available for, metrics or outcomes Pre-defined groups can be created for of outcomes within a course be reported on in customizable tabular formats be reported on in customizable graphical formats reported on at any time be reported longitudinally for all levels, metrics and outcomes Custom groups can be created for of outcomes This evaluation element focuses on the price of the system. It looks at the hosting model of the system, the duration of the subscription or licensing of the system, and the approximate cost of the system typically derived from full-time equivalent numbers. Table 7: Pricing Category Description Hosting model Subscription Cost Is the software tool hosted on site by the institution (Self) or is site as a service (SaaS) hosting available? Is the software tool available by a designated subscription or licensing model (Yearly License) or is it freely available (Open-source) Cost model and fee for the software tool. Most software packages are available on pricing that is scaled on full time equivalent (FTE) numbers 3. SOFTWARE TOOL SUMMARIES In the interest of providing a rich evaluation of each software tool, a brief summary of each is provided below. These summaries focus on the particular strengths and weaknesses of the software tool that may not evident from the evaluation criterion. 3.1 elumen elumen ( is a tool with a focus on comprehensive, analytics and of outcomes. Its primary strengths are the outcomes focus as well as analytics and aspects of the program. elumen allows for easy creation of outcomes within programs and courses for any users, and for users to assess these outcomes via usercreated rubrics. Both outcomes and rubrics can be archived and used by any other user. The and analytics can be run on-demand and exists on a unique database where outcomes drill down to student level, specific outcome, or unique user-defined group. The weaknesses of elumen are the lack of integration with other LMS vendors, and feedback. Regarding integration, users have to manually import data through a wizard into the system in order to populate the database. The development of an LTI or API would improve this. In-line is also a weakness of the system, where users cannot view the student evidence within elumen during and have to have a separate system or physically review the evidence for. Rich feedback is not a capability of the system, with only rubric outcomes scores being provided to students for feedback. 3.2 Canvas Canvas ( is a unique, web-based open-source LMS with a focus on developing unique content through an open-source API and a large number of 3 rd party tools through LTI integration. Canvases primary strengths are outcomes, rubrics and. Canvas allows for quick and easy Montreal, QC; June 17-20, of 8

5 creation of outcomes to be assessed and shared at any level of an organization with complete customization possible. s are quickly and easily created with users able to create custom outcomes or search an institution wide database of pre-defined outcomes (related to accreditation or provincial ). Grading can be done quickly and easily within the student evidence, either by using the rubric or manually assigning a grade. Feedback is a particular strength of Canvas, with graders able to view, mark-up, grade and comment directly on student submitted evidence within a single window. The weaknesses of the system are the analytics and of student outcomes. All reports are generated from within the system, and have little availability for customization. Reporting is limited to organization groups and only through tabular views, CSV exports, and basic course-level statistics (not outcomes linked). Outcomes access is limited to administrator access, not the course instructor, and only offers basic data aggregation and statistics. Custom, graphical options and custom grouping are not a current feature of Canvas, which limits its outcomes analytics and abilities. 3.3 Moodle Moodle ( is an entirely opensource, free to use and customize and content management system. Users of Moodle are free to develop their own modules for the program, or install any community-developed application. Moodle s main strength is the open-source nature of the program, which allows for complete customization. This allows users of Moodle to do nearly anything, deliver course content, manage grades, develop rubrics, and assess outcomes. However, while these modules allow for a multitude of uses, the overall integration may not be user friendly and takes considerable effort into developing a professional well-designed course. Modules exist for outcomes based and the creation of evaluation rubrics. These modules allow for outcomes and rubrics to be created, link outcomes to rubrics and create a repository for both, however the interface by which this is accomplished is confusing. Efficient grading, of outcomes, rich feedback, outcomes analytics and are weakness of the system. Grading has to be done offline then recorded via upload or the grade book, with outcomes being assessed in a similar fashion. Rich feedback is also limited to offline delivery, with graders having to download the student submission, mark-up or comment separately, then re-upload to Moodle in order for the student to read feedback. Outcomes analytics and is a completely manual process, having to download outcomes results from Moodle via a data export, which is often only available at select times during a semester. Reporting must be done in a separate environment or application, such as Excel, in order to construct viewable reports and manage data. 3.4 Waypoint Outcomes Waypoint Outcomes ( is an outcomes and tool based around student engagement, authentic, and efficient use of faculty time when grading. This is primarily a CPI tool and is not a standalone LMS, and relies on LTI and API integration to LMS systems. This link allows for of key pieces of student evidence for outcomes and the ability to provide rich and detailed feedback in an efficient manner. Waypoint outcomes strengths are in rubrics, outcomes, and. s are fully customizable and created by instructors within Waypoint Outcomes and can be stored within a searchable repository for others to view and use. outcomes can be created at any level within an institution and are stored within a fully searchable database to integrate into other courses or rubrics. Assessment in Waypoint is a key feature, with grading of student evidence, mark-up of evidence and feedback occurring directly within the system and those results being transferred back to the LMS. The weaknesses of the system are its outcomes analytics and, which is in the initial stages of development. Some measures of outcomes are available at key points, but the reports are canned and possess minimal measures of customization or graphical options. The 2-stage nature of the tool may also be a drawback to some programs that seek to have a more efficient, singular process. Currently, Waypoint integration is only available with Blackboard Learn, Moodle and Pearson ecollege. 3.5 Desire2Learn Desire2Learn (D2L) ( is a content management system with an additional tool package for continuous program improvement support. It provides a environment, content management and delivery, tools alongside additional software for repositories, student success, outcomes analytics and. D2L supports many third party applications via both API and LTI integration. The strength of Desire2Learn is that is a well-rounded, single system, comprehensive solution for content delivery as well a means to manage and report on student outcomes. It provides a high-quality environment, with a quality rubric and system capable of traditional and outcomes Montreal, QC; June 17-20, of 8

6 based grading. s can be generated by course personnel and archived in the repository for other educators to use. Outcomes can be created at any level of an institution and multiple outcomes or accreditation schemes, and be linked to any. Assessment can be done in-line in a very expedient manner, viewing the student submission and grading via a pop-up window. Feedback can only be provided to the student at each individual outcome in a rubric as well as overall feedback on the submission. It should be noted however, that a free ipad grader application for D2L allows for graders to mark up submissions and grade submissions. The main weakness of D2L is the relative infancy of its outcomes and analytics module. The analytics module currently doesn t offer freely customizable or graphical representations of and has some limitations regarding drill-down capability and longitudinal. The analytics module can provide tabular on outcomes at multiple institutional levels, and both course personnel and administrators can run reports. 3.6 LiveText LiveText ( is a continuous program improvement solution that focuses on strategic planning, outcomes and and institutional effectiveness. LiveText is primarily a standalone CPI tool that offers integration with LMS systems (Blackboard, Moodle, D2L) through API and LTI. This link allows for key pieces of submitted student evidence for outcomes based, and provide rich feedback to students. The key strengths of LiveText are the outcomes, and analytics. LiveText allows for the creation of outcomes at any level in an institution, and of outcomes in multiple instances. Outcomes can also be stored in a searchable repository for other educators to search and use. Assessment in LiveText is accomplished through customizable rubrics linked to outcomes, which can be done within the system while viewing the student submission. Rich feedback can be provided to the student, directly marking up and commenting on the submission. Outcomes analysis can be accomplished through by a series of table-based reports that can be run at any level with drill-down capability to the individual student level. LiveText offers on-demand of student outcomes, with the capability for longitudinal and data management. The weaknesses of LiveText are the lack of graphical and customizable outcomes and the lack of traditional grading. The two-stage nature of the system may also be undesirable for those seeking a singular solution, and will be required to administer non-outcomes related s. 4. EVALUATION RESULTS Each software tool was classified and evaluated for each criterion and the results tabulated into the table shown in Fig CONCLUSIONS It is important to note that the evaluations presented in this paper are not meant to rank the software tools or promote the use of a single tool, but to inform the reader on the strengths and weaknesses of software tools. Each of the evaluated solutions is capable of being a part of, or a centerpiece of a data informed, outcomes based CPI process. Ultimately, institutions must carefully consider a variety of factors when replacing an existing tool, or integrating a new software solution into an existing process, as this is fundamentally a change management issue[8]. Such factors include, but are not limited to[4], [5], [9]: 1. Stakeholder needs and requirements 2. Direction and leadership of CPI processes 3. Existing climate regarding new technology 4. Complexity and sustainability of tools This paper is the initial evaluation of a small sample of software tools. Future work consists of continued analysis of LMS, CMS, CPI and other tools supporting data-informed, outcomes based, continuous program improvement. Acknowledgements The authors would like to acknowledge support from the DuPont Canada Chair in Engineering Education Research and Development. Support for the EGAD initiative was provided by Engineers Canada and the National Council of Deans of Engineering and Applied Science. Montreal, QC; June 17-20, of 8

7 Proc Canadian Engineering Education Association (CEEA13) Conf. Fig. 1. Evaluation of selected software tools Montreal, QC; June 17-20, of 8

8 References [1] J. Allan, outcomes in higher education, Studies in Higher Education, vol. 21, no. 1, pp , Available at: [2] J. Biggs, What the Student Does: teaching for enhanced, Higher Educ. Res. & Development, vol. 18, no. 1, pp , Apr Available at: [3] T. W. Banta, Hallmarks of Effective Outcomes Assessment: Assessment Update Collections, 1st ed. Wiley, [4] C. Blaich and K. Wise, From Gathering to Using Assessment Results, (NILOA Occasional Paper No.8). Urbana, IL: University of Illinois and Indiana University, National Institute for Outcomes Assessment (NILOA) Available at: /Wabash_001.pdf [5] G. R. Baker, N. A. Jankowski, S. Provezis, and J. Kinzie, Using Assessment Results: Promising Practices of Institutions That Do It Well, Urbana, IL: University of Illinois and Indiana University, National Institute for Outcomes Assessment (NILOA) Available at: ssmentresults.htm [6] T. W. Banta and C. Blaich, Closing the Assessment Loop, Change: The Magazine of Higher, vol. 43, no. 1, pp , Dec Available at: [7] E. Heinrich, J. Milne, A. Ramsay, and D. Morrison, Recommendations for the use of e tools for improvements around assignment marking quality, Assessment & Evaluation in Higher Education, vol. 34, no. 4, pp , Aug Available at: [8] G. Scott, Effective change management in higher education, Educause review, vol. 38, pp , Available at: [9] A. L. McCann, Factors affecting the adoption of an e system, Assessment & Evaluation in Higher Education, vol. 35, no. 7, pp , Dec Available at: Montreal, QC; June 17-20, of 8