IBM CBU for IBM i This is Power on a Smarter Planet

Transcription

1 Oct, 2014 IBM CBU for IBM i This is Power on a Smarter Planet Steven Finnes PowerHA and CBU product offering manager #powersystems, #powerlinux, #bigdata, #IBMWatson, #OpenPOWER 2014 IBM Corporation

2 Power Systems CBU for PowerHA Primary Software tier primary CBU Software tier CBU Offering for PowerHA cluster Offering Features Two enterprise servers for the price of one Matching processor and memory Temporary entitlement transferability Offering Supports 850, 870 and 880 Temporary transfer of AIX or IBM i processor license entitlements from the primary to CBU system Two year temp keys for eligible IBM i LPPs Registration required prior to product shipment Prerequisites Order CBU specify code when ordering a Power server Minimum one processor entitlement of AIX or IBM i Primary and CBU server must be same model/type Minimum permanent processor (and memory) activations on the primary + equal number of PowerHA and AIX as processor activations on the pimary Registration of primary system and CBU is required prior to CBU order fulfillment CBU feature may only be acquired upon purchase of a new box or via a model/type upgrade 2

3 Traditional CBU licensing example two system one customer topology Planning CBU allows PowerHA licenses entitlement failover from the registered production server Minimum 1 entitlement required on the CBU box* CBU server allows the temporary transfer of entitlements from primary server for non concurrent usage on the CBU server Round-up when using partial processors 3.5 processors = 4 entitlements One customer Example No HA/DR required for Partition 1 No PowerHA licenses HA required for Partition 2 and 3 All processors in the production server partitions 2 and 3 are licensed for PowerHA One key, 8 entitlements The license key will be a permanent key installed on partition 2 and 3 A single processor is licensed on the CBU server One key, one entitlement The non-os LPPs will be temporary keys for 8 cores good for two years installed on partitions 2 and 3 * if the HA/DR solution requires more than one core on CBU to run replication services, those extra cores must also be licensed. 3

4 Power Systems Capacity Backup Edition (CBU for i) - overview One core is the minimum permanent entitlement required; however any production workload requires permanently licenses (for example replication workload) Primary Software tier primary CBU Software tier CBU The CBU offering is used in high availability and disaster recovery deployments Offering enables customers to move workload between boxes without fully redundant OS entitlements Two year temporary keys eliminate redundancy for eligible LPPs CBU designation available only upon purchase of a new box and must be registered to a qualified primary. If a CBU is no longer affiliated with the original registering customer, it is not recognized as a CBU. Registration process: client agrees to terms and conditions, CBU registration is validated, shipment is approved CBU agreement requires that both the primary and CBU are owned by the same enterprise. CBU for IBM i registration 4

5 Multiple primary systems CBU topology Customer A CBU A Customer B CBU B Customer C CBU C The primary system to CBU is always a one to one relationship. Each primary system is registered to a CBU server Each CBU has a minimum of one processor core licensed (more as required to support workload) Primary and CBU are owned by the same enterprise 5

6 Multiple primary systems, single enterprise virtual CBU (VCBU) Customer A VCBU A Customer A VCBU A Customer A VCBU B Customer A VCBU B Customer A VCBU C Customer A VCBU C Initial State CBU Frame CBU Frame Subsequent State Each primary system is registered to the CBU Frame, same enterprise Each primary system has a corresponding dedicated VCBU partition on the CBU frame Each VCBU partition has a minimum of one processor core licensed (more as required to support workload) The assigned processing units and assigned virtual processors for the VCBU partition must be set to the minimum entitled cores prior to workload failover. The maximum processing units and virtual processors are set to the number of entitlements that VCBU will expand to at a workload failover.* (inverse operation on the primary partition post failover) Electronic Service Agent (ESA) installed and running on each of the primary systems and the CBU frame 6 *not required for shared disk cluster application partitions

7 Multiple primary systems, MSP deployment virtual CBU (VCBU) Customer A VCBU A Customer A VCBU A Customer B VCBU B Customer B VCBU B Customer C VCBU C Customer C VCBU C Initial State CBU Frame CBU Frame Subsequent State Each primary system is registered to the CBU Frame, all servers owned by the MSP Each primary system has a corresponding dedicated VCBU partition on the CBU frame Each VCBU partition has a minimum of one processor core licensed (more as required to support workload) The assigned processing units and assigned virtual processors for the VCBU partition must be set to the minimum entitled cores prior to workload failover. The maximum processing units and virtual processors are set to the number of entitlements that VCBU will expand to at a workload failover.* (inverse operation on the primary partition post failover) ESA installed and running on each of the primary systems and the CBU frame 7 *capped partition not required for shared disk cluster application partitions

8 Single primary system, multiple customers MSP deployment Customer A VCBU A Customer A VCBU A Customer B VCBU B Customer B VCBU B Customer C VCBU C Customer C VCBU C Primary Frame CBU Frame Primary Frame CBU Frame Initial State Subsequent State Each primary system is registered to the CBU Frame both servers owned by the MSP Each primary partition has a dedicated VCBU partition Each VCBU has a minimum of one processor core licensed (more as required to support workload) The assigned processing units and assigned virtual processors for the VCBU partition must be set to the minimum entitled cores prior to workload failover. The maximum processing units and virtual processors are set to the number of entitlements that VCBU will expand to at a workload failover.* (inverse operation on the primary partition post failover) ESA is installed and running on each of the primary systems and the CBU frame 8 *capped partition not required for the shared disk cluster application partitions

9 One Customer three system, two-site CBU topology Primary A CBU A CBU B Global Mirror or Metro Mirror Site A Site B Each CBU is registered to the primary system, same enterprise Primary frame A and CBU frame A in Site A for, CBU B in DR Site All servers are in a single PowerHA cluster Each CBU has a minimum of one processor core licensed Licensed cores on Primary and CBU must be capped for non shared storage configurations 9

10 Three system, two- site CBU MSP topology, initial state Customer A VCBU A VCBU A Customer B VCBU B VCBU B Customer C VCBU C VCBU C Primary Frame CBU Frame CBU Frame Site A Global Mirror or Metro Mirror Initial State Site B 10 Each CBU is registered to the primary system, both servers owned by the MSP enterprise Initial State Primary frame A and CBU frame A in Site A for, CBU B in DR Site All servers are in a single PowerHA cluster Each CBU has a minimum of one processor core licensed (more licensed as workload requires) The assigned processing units and assigned virtual processors for the VCBU partition must be set to the minimum entitled cores prior to workload failover. The maximum processing units and virtual processors are set to the number of entitlements that VCBU will expand to at a workload failover.* (inverse operation on the primary partition post failover)

11 Three system, two- site CBU MSP topology, production state Customer A VCBU A VCBU A Customer B VCBU B VCBU B Customer C VCBU C VCBU C Primary Frame CBU Frame Global Mirror or Metro Mirror CBU Frame Site A Subsequent State Site B 11 Each CBU frame is registered to the primary system, same enterprise All servers are in a single PowerHA cluster Each CBU has a minimum of one processor core licensed The assigned processing units and assigned virtual processors for the VCBU partition must be set to the minimum entitled cores prior to workload failover. The maximum processing units and virtual processors are set to the number of entitlements that VCBU will expand to at a workload failover.* (inverse operation on the primary partition post failover)

12 Designated backup machine (DBM) disaster recovery (The DBM option is distinct and separate from the CBU offering) Customer A CPW Customer A CPW partition A Partition A Customer B CPW Customer B CPW partition B Partition B Customer C CPW Customer C CPW partition C Partition C Primary Systems DBM 12 The Designated Backup Machine may be used only for backup recovery purposes, processor cores used for backup recovery services including those used to create and or manage the backup recovery environment must be licensed. IBM i OS entitlements not temporarily transferable as in the case of the CBU offering: i.e. IBM i OS entitlements must be acquired by the MSP for all workload that will run on the DBM. Two-year temporary keys for the non-os LPPs for the DBM are available by completing the form REQUEST FOR DESIGNATION OF A BACKUP IBM MACHINE. Products for which temp keys are acquired may not be used concurrently on primary and DBM DBM may be owned by MSP while hosted servers are owned by an MSP client. MSP is required to provide verification to the Compliance & Entitlement Support team that the CPW rating of the partition for the client does not exceed the CPW rating of the client machine (i.e. show from the HMC the processors allocated on the client's partition). DR tests: up to three days, four times per year per hosted client

13 Two year temp key request form Temp keys issued for LPPs not used concurrently on the primary and backup Temp keys are not issued for IBM i OS processors (5051) or users (5052) Must be renewed every two years 13

14 CBU for IBM i temporary transferable procedure A software key tells each system s license manager how many i processor license entitlements each system has. If the client ever runs or assigns more i work than the system has entitlements; then messages are periodically issued to the operator indicating the IBM is out of license compliance. By the terms of the IBM licensing agreement, the client must then bring the IBM into compliance by either a) reducing i workload or b) adding i processor license entitlements. Signing the additional license agreement for CBU temporary transfers documents that IBM and the client understand when entitlements can be transferred from the primary to the CBU system. (Signature is either a real signature or a click to accept.) IMPORTANT when entitlements are temporarily transferred to the CBU system, the software key information on neither machine is altered. Thus the CBU system will issue the out-of-compliance message indicating it is out of compliance The additional license agreement terms give permission to the client under this situation to ignore these messages. The client agrees to monitor the i usage on both the primary and CBU systems to ensure the i usage on the pair of machines does not exceed the total number of i processor license entitlements. In addition to IBM i processor license entitlement, P05 and processor group level systems have IBM i user entitlements. User entitlements are transferable from the primary to the CBU. If the primary system is an IBM i processor based system ( processor group or higher), and the CBU is a processor and user based system, you must purchase any required user entitlements on your CBU. 14

15 Primary and CBU Pairings CBU for i Environments Tier Eligible Primaries Tier 795 (9119-FHB) CBU (specify code 4896) P50 o 795 (9119-FHB) P (9179 MHC) CBU (Specify code 4891) 780 (9179 MHD) CBU Specify code 4891) o 780 (9179 MHB) o 780 (9179 MHC) o 789 (9179 MHD) P50 P50 P (9119-MHE) CBU (specify code 4891) P30 o 795 (9119-FHB) P (9119-MME) CBU (specify code 4891) 770 (9117 MMC) CBU (Specify code 4891) 770 (9117 MMD) CBU (Specify code 4891) 760 (9109 RMD) CBU (specify code 4891) o 880 (9119-MHE) o 780 (9179 MHB) o 780 (9179 MHC) o 789 (9179 MHD) o 870 (9119-MME) P30 P50 P50 P50 P30 o 770 (9117 MMB) P30 o 770 (9117 MMC) P30 o 770 (9117 MMD) P (8408 E8D) CBU (Specify code 0444) o 760 (9109 RMD) P (8205 E6D) CBU (Specify code 0444) 730 (8231 E2D) CBU (Specify code 0444) S824 ( A) CBU (Specify code 0444) o 770 (9117 MMB) o 770 (9117 MMC) o 770(9117 MMD) o 880 (9119-MHE) P30 P30 P30 P30 o 870 (9119-MME) P30 o 750 (8408 E8D) o 740 (8205 E6B) o 740 (8205 E6C) o 740 (8205 E6D) o 750 (8233-E8B) o 730 (8231 E2D) o S824 ( A) 15 The software tier of the primary machine must be equal to/or greater than the software tier of your CBU order

16 Primary and CBU Pairings CBU for i Environments Tier Eligible Primaries Tier 710 (8231- E1D) CBU (Specify code 0444) o 750 (8408 E8D) 6&8 Core Processor FC # EPCG, EPCJ o 750 (8233-E8B) o 730 (8231-E2D) 710 (8268-E1D) CBU (Specify Code 0444) 6&8 Core Processor FC # EPCG, EPCJ o 740 (8205 E6B) o 740 (8205 E6C) o 740 (8205 E6D) 720 (8202-E4D) CBU (Specify code 0444) 6&8 Core Processor FC # EPCL, EPCM o S824 ( A) o 720 (8202-E4B) # 8351, 8352 o 720 (8202 E4C) # EPC6, EPC7 S814 ( A) CBU (Specify code 0444) 6&8 Core Processor FC # EPX0, EPX6 o 720 (8202 E4D) # EPCL, EPCM o 710 (8231-E1D) #EPCG, EPCJ o 710 (8268-E1D) #EPCG, EPCJ ) o S814 ( A) o P460 ( X) o P460 ( X) o P270 ( X) o P260 ( X) o P260 ( X) o PS704 ( X) o PS703 ( X) o PS701/702 ( Y) # (Processor Feature Code Requirements) The software tier of the primary machine must be equal to/or greater than the software tier of your CBU order 16

17 Primary and CBU Pairings CBU for i Environments Tier Eligible Primaries Tier P460 ( X) CBU (Specify code 4898) o P460 ( X) o P460 ( X) P270 ( X) CBU (Specify code 4898) o P270 ( X) o P260 ( X) P260 ( X) CBU (Specify code 4898) o P260 ( X) o PS704 ( X) PS703 ( X) CBU (Specify code 4898) o PS703 ( X) o PS702/701 ( Y) o 720 (8202-E4B) # 8351, 8352 o 720 (8202-E4C) # EPC6, EPC7 o 720 (8202-E4D) # EPCL, EPCM o 710 (8231-E1D) #EPCG, EPCJ o 710 (8268-E1D) #EPCG, EPCJ o S814 ( A) # ( Processor Feature Code Requirements) The software tier of the primary machine must be equal to/or greater than the software tier of your CBU order 17

18 Primary and CBU Pairings CBU for i Environments Tier Eligible Primaries Tier S814 ( A) (Specify code 0444) P05 o S814 ( A) 4 core Processor FC # EPXK o P460 ( X) o P460 ( X) 720 (8202 E4D) CBU (Specify code 0444) 4 Core Processor FC # EPCK o P270 ( X) o P260 ( X) o P260 ( X) 710 (8231- E1D) CBU (Specify code 0444) 4 Core Processor FC # EPCE o PS704 ( X) o PS703 ( X) o PS701/702 ( Y) 710 (8268-E1D) CBU (Specify Code 0444) 4 Core Processor FC # EPCE o S814( A) # EPXK o 720 (8202 E4B) #8350, 8351, 8352 o 720 (8202-E4C) #EPC5, EPC6, EPC7 P05 /P05 /P05 PS700 ( Y) CBU (Specify Code 4898) o 720 (8202-E4D) #EPCK, EPCL, EPCM o 710 (8231-E1D) #EPCE, EPCG, EPCJ /P05 /P05 o 710 (8268-E1D) #EPCE, EPCG, EPCJ P05 P260 ( A) CBU (Specify Code 4898) o PS700 ( Y) P05 4 Core Processor FC#EPCK o P260 ( A) P05 # ( Processor Feature Code Requirements) The software tier of the primary machine must be equal to/or greater than the software tier of your CBU order 18

19 PowerHA Tools for IBM i Lab Services PowerHA Tools for IBM i Capability Benefit DS8000 Storwise Internal Smart Assist for PowerHA on IBM i Provides operator commands and scripts to supplement PowerHA installation and ongoing operations for IASP enabled applications. IASP Copy Services Manager (Automated recovery with faster IASP-level vary on, no system IPL) Flashcopy Automates Flashcopy of IASP for daily off-line backup with seamless BRMS integration. Simplifies deployment and ongoing management of high availability for critical IBM i applications. Increases application availability by reducing or eliminating backup window for routine daily backups. Yes Yes Yes Yes Yes LUN-level Switching Simplifies deployment and automates switching of an IASP between IBM i cluster nodes in one data center. Enables a business continuity manager to provide a simple, single site HA solution. Yes* ** Metro Mirror or Global Mirror Simplifies initial deployment and automates ongoing server and storage management of two-site Metro Mirror or Global Mirror HA or DR solutions. Requires IASP enabled applications.. Enables a business continuity manager to provide seamless operation of integrated server and storage operations for two-site high availability or disaster recovery. Yes Metro Global Mirror (MGM) Extends PowerHA functionality to provide three-site server/storage replication solution combining Metro Mirror for HA with Global Mirror for DR. Requires IASP enabled applications and IBM Tivoli Productivity Center Replication (TPC-R). Full System Copy Services Manager (Automated recovery, requires full system IPL) Flashcopy Automates full system Flashcopy for daily off-line backup with integrated support for BRMS without IASPenabled applications. Enables a business continuity manager to further lower business risk and maximize business resilience for highly critical business applications that require threesite HA/DR protection. Increases application availability by reducing or eliminating backup window for routine daily backups. Enables an entry solution while planning IASP enablement. Yes XIV Yes Yes Yes Metro Mirror or Global Mirror Simplifies initial deployment and automates ongoing server and storage management of two-site Metro Mirror or Global Mirror HA or DR solutions. without IASPenabled applications. Enables a business continuity manager to provide seamless operation of integrated server and storage operations for HA or DR. Enables an entry solution while planning IASP enablement. Yes *DS8000 support available with PowerHA Tools for IBM i 6.1 or earlier, included in PowerHA SystemMirror 7.1 **V7000 support included with PowerHA 7.1 TR6 19

20 IBM Lab Services Offerings for PowerHA for IBM i PowerHA Service Offering IBM i High Availability Architecture and Design Workshop PowerHA for IBM i Bandwidth Analysis IBM i Independent Auxiliary Storage Pool (IASP) Workshop PowerHA for IBM i Implementation Services Description An experienced IBM i consultant will conduct a planning and design workshop to review solutions and alternatives to meet HA/DR and backup/recovery requirements. The consultant will provide an architecture and implementation plan to meet these requirements. An experienced IBM i consultant will review network bandwidth requirements for implementing storage data replication. IBM will review I/O data patterns and provide a bandwidth estimate to build into the business and project plan for clients deploying PowerHA for IBM i. An experienced IBM i consultant will provide jumpstart services for migrating applications into an IASP. Training includes enabling applications for IASPs, clustering techniques, plus managing PowerHA and HA/DR solution options with IASPs. An experienced IBM consultant will provide services to implement an HA/DR solution for IBM Power Systems servers with IBM Storage. Depending on specific business requirements, the end-to-end solution implementation may include a combination of PowerHA for IBM i and/or PowerHA Tools for IBM i, plus appropriate storage software such as Metro Mirror, Global Mirror and/or Flashcopy. For more information on PowerHA Tools for IBM i offerings and services, contact: Mark Even [email protected] [email protected] 20

21 Frequently Asked Questions What happens if if the registration is not completed? The order will not be fulfilled. If the server option is not able to be registered, it most likely means that it is not supported I have this server that I want to convert into a CBU, can I do that? The only way to attain CBU designation is through the purchase of a new box or via a model upgrade You must include the CBU specify code when the upgrade is ordered Can reverse the roles of my Primary and CBU via a record change process? No. The only legitimate role change operation is when the workload is moved to and from the CBU. This is the purpose of the CBU offering; enabling role swap operations for the purpose of HA or DR operations. Can I use the additional processors on my CBU for running an AIX application? Assuming that you have sufficient capacity for your i partition, you may use other the processor cores for any purpose as long as you have purchased the processor activations and the commensurate entitlements. How many primary systems can I backup with my CBU? One dedicated IBM i system or dedicated partition may be paired to a dedicated Virtual CBU ( VCBU ) partition for the purpose of role swap operations. Each primary-cbu pairing will be licensed as though they were both stand-alone boxes. Both the primary and the CBU must be owned by the same enterprise 21

22 Frequently Asked Questions Can a service provider use the IBM i CBU offering to support multiple clients? Yes, as long as the service provider owns both the primary systems and the CBU systems, and hosted clients are on dedicated primary and corresponding dedicated VCBU partitions or stand alone systems, and Licensing requirements for traditional single client to a single CBU apply to any type of pairing. Can I register more than one CBU to a primary system? This is a configuration typically associated with a PowerHA cluster implementation. You will register each CBU against one given primary system: tell us in the comment section that you will be registering more than one CBU to this primary. Each CBU will need to be able to be registered as though it were a stand alone server being registered to the given primary. Are there any additional compliance conditions associated with multiple primary and/or multiple CBU topologies? It is required that you install and run the IBM Electronic Service Agent (ESA) and send monthly reports. For implementations not based on storage-based clustering configurations, e.g. PowerHA, which inherently manage the production workload to access only one node in the cluster configuration at a time, it is required that the primary and CBU partitions be managed such that the assigned processing units and assigned virtual processors for the VCBU partition are set to the minimum entitled cores prior to workload failover. The maximum processing units and virtual processors are set to the number of entitlements to which VCBU will expand upon a workload failover. (The inverse operation will be performed on the primary partition post failover. The primary will be set to the minimum entitled cores ) I'm using logical replication, how many cores do I need licensed on the CBU? Logical replication a hot backup solution therefore all workload associated with Logical Replication must be permanently licensed. If it requires two cores to process replication on the CBU, those must be permanently licensed. 22

23 Frequently Asked Questions How do I license multiple primary systems (partitions) and CBU partitions If you have multiple primary systems paired to a single CBU, each primary system will have its own dedicated CBU partition called a VCBU and the minimal OS entitlements will be purchased for each of the dedicated corresponding VCBU partitions per the terms and conditions. If you are an MSP hosting multiple clients, each client will have their own dedicated primary partition and a corresponding dedicated VCBU partition each of which is licensed as though they were stand alone systems ( the minimal OS entitlements will be purchased for each of the dedicated corresponding VCBU per the terms and conditions) Think of each partition as being a separate system or node in a cluster topology. For each partition on the CBU which is paired to a primary partition via an HA/DR relationship, a minimum of one of the processor cores in that partition must have the entitlement to accommodate the transfer of entitlements from the corresponding primary partition. What is the minimum required OS entitlement on the CBU? That is determined by the number of cores required to support permanent resident peak workload on the CBU or VCBU if your hosting multiple primary servers. For example, if a data replication tool consumes 6 processor cores on a VCBU during a peak workload; there must be a minimum of 6 IBM i entitlements permanently installed on the CBU. How do I license for environments where I have unlimited user entitlements and multiple customers? How many user entitlements do I need to acquire for the CBU? If you are planning to failover over a single client, the minimum number of user entitlements you will need to purchase for the CBU would be equal to the user entitlements required by the client with the largest number of user entitlements. I have 10 customers each in a micro partition. Can I temporarily transfer one of them to the CBU? No, only an entire processor entitlement is temporarily transferable. 23

24 Frequently Asked Questions Can I transfer all of my IBM i user entitlements? No, there will always be a minimum of one IBM i entitlement which is not transferable (and there will always be a minimum of one on the CBU). Note the minimum of one is not an absolute. If there is resident workload on the primary and/or CBU which is not temporarily transferred, those processor cores must be licensed permanently. For example, replication workload requires IBM i processor entitlements (and 5250 Enterprise Enablement activations or IBM i user entitlements) to support that operation at peak workload on both the primary and CBU or VCBU. I have a 750 primary and I would like to use a 720 as a CBU box, the 750 doesn t have user entitlements what do I do You will need to purchase as many user entitlements on the CBU as you intend to use in the event of a failover Can I have the primary system and CBU system in different countries? There is no restriction in the CBU agreement that prevents this. It is not a consideration from a CBU terms and conditions perspective. 24

25 Frequently Asked Questions Can the CBU ever function as a stand alone production system? The CBU is registered with a specific primary server and must remain so to be in compliance as a CBU. A box that is on the used market that was once a registered CBU is no longer recognized as a CBU and is not able to registered. At this point it s just another box and is not eligible to act as a CBU that can run with entitlements temporarily transferred from a primary. Any workload that is licensed on the CBU can be hosted there. For example, you may have an AIX partition or a development partition used as a primary location. This is business as usual for those environments. The CBU Ts and Cs apply specifically to the primary and secondary IBM i HA/DR environments to be used for role swap purposes. What type of HA or DR solution can I use with my IBM CBU for i? You may use any approach you choose including a cold/warm backup based on tape recovery. If I am using a cold/warm backup solution for multiple primary systems, do I still need to have a VCBU for each partition? If you are using a cold/warm backup recovery technology such as restore from a tape backup, and you can recovery only one primary server at any given time, then you can host multiple primaries to a single CBU without implementing a VCBU configuraiton. If on the other hand you intend to recovery more than one primary at a time, each of those must have their own VCBU just as in the case of a hot backup technology. 25 What does temporary mean when used in the context of transferring optional IBM i user entitlements or optional IBM i processor entitlements? Temporary means that the transferred entitlements belong to the primary system. If the primary system goes away, all optional transferred IBM i user entitlements, Enterprise Entitlements and IBM i license entitlements remain with the primary system. When you initially configure your licensing topology, all transferable entitlements will be configured on the primary system. In effect you are entitled to run your production workload either on the primary partition or on the corresponding CBU partition but not concurrently.

26 Frequently Asked Questions For which Licensed Program Products can I get temporary keys for the CBU? You can get temporary keys for the IBM i non-os LPPs which are delivered as part of the IBM i keyed programs. How do I get temporary keys? The temporary key form can be requested from the Key Center at [email protected]. Is SWMA transferable to the CBU? No, in fact, if you would like IBM support and the ability to do upgrades, you need the SWMA on the entitlements that you purchased for the CBU to be current. Can I change my CBU back into a primary box? If this machine is no longer going to function as CBU, you can submit an RPOMES order to remove the CBU feature 0444 from the HW. Can I register an IBM i solution edition box as a CBU No. The CBU and Solution Edition are mutually exclusive offerings. 26

27 Special notices This document was developed for IBM offerings in the United States as of the date of publication. IBM may not make these offerings available in other countries, and the information is subject to change without notice. Consult your local IBM business contact for information on the IBM offerings available in your area. Information in this document concerning non-ibm products was obtained from the suppliers of these products or other public sources. Questions on the capabilities of non-ibm products should be addressed to the suppliers of those products. IBM may have patents or pending patent applications covering subject matter in this document. The furnishing of this document does not give you any license to these patents. Send license inquires, in writing, to IBM Director of Licensing, IBM Corporation, New Castle Drive, Armonk, NY USA. All statements regarding IBM future direction and intent are subject to change or withdrawal without notice, and represent goals and objectives only. The information contained in this document has not been submitted to any formal IBM test and is provided "AS IS" with no warranties or guarantees either expressed or implied. All examples cited or described in this document are presented as illustrations of the manner in which some IBM products can be used and the results that may be achieved. Actual environmental costs and performance characteristics will vary depending on individual client configurations and conditions. IBM Global Financing offerings are provided through IBM Credit Corporation in the United States and other IBM subsidiaries and divisions worldwide to qualified commercial and government clients. Rates are based on a client's credit rating, financing terms, offering type, equipment type and options, and may vary by country. Other restrictions may apply. Rates and offerings are subject to change, extension or withdrawal without notice. IBM is not responsible for printing errors in this document that result in pricing or information inaccuracies. All prices shown are IBM's United States suggested list prices and are subject to change without notice; reseller prices may vary. IBM hardware products are manufactured from new parts, or new and serviceable used parts. Regardless, our warranty terms apply. Any performance data contained in this document was determined in a controlled environment. Actual results may vary significantly and are dependent on many factors including system hardware configuration and software design and configuration. Some measurements quoted in this document may have been made on development-level systems. There is no guarantee these measurements will be the same on generallyavailable systems. Some measurements quoted in this document may have been estimated through extrapolation. Users of this document should verify the applicable data for their specific environment. Revised September 26,

28 Special notices (cont.) IBM, the IBM logo, ibm.com AIX, AIX (logo), AIX 5L, AIX 6 (logo), AS/400, BladeCenter, Blue Gene, ClusterProven, DB2, ESCON, i5/os, i5/os (logo), IBM Business Partner (logo), IntelliStation, LoadLeveler, Lotus, Lotus Notes, Notes, Operating System/400, OS/400, PartnerLink, PartnerWorld, PowerPC, pseries, Rational, RISC System/6000, RS/6000, THINK, Tivoli, Tivoli (logo), Tivoli Management Environment, WebSphere, xseries, z/os, zseries, Active Memory, Balanced Warehouse, CacheFlow, Cool Blue, IBM Systems Director VMControl, purescale, TurboCore, Chiphopper, Cloudscape, DB2 Universal Database, DS4000, DS6000, DS8000, EnergyScale, Enterprise Workload Manager, General Parallel File System,, GPFS, HACMP, HACMP/6000, HASM, IBM Systems Director Active Energy Manager, iseries, Micro-Partitioning, POWER, PowerExecutive, PowerVM, PowerVM (logo), PowerHA, Power Architecture, Power Everywhere, Power Family, POWER Hypervisor, Power Systems, Power Systems (logo), Power Systems Software, Power Systems Software (logo), POWER2, POWER3, POWER4, POWER4+, POWER5, POWER5+, POWER6, POWER6+, POWER7, System i, System p, System p5, System Storage, System z, TME 10, Workload Partitions Manager and X-Architecture are trademarks or registered trademarks of International Business Machines Corporation in the United States, other countries, or both. If these and other IBM trademarked terms are marked on their first occurrence in this information with a trademark symbol ( or ), these symbols indicate U.S. registered or common law trademarks owned by IBM at the time this information was published. Such trademarks may also be registered or common law trademarks in other countries. A full list of U.S. trademarks owned by IBM may be found at: Adobe, the Adobe logo, PostScript, and the PostScript logo are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States, and/or other countries. AltiVec is a trademark of Freescale Semiconductor, Inc. AMD Opteron is a trademark of Advanced Micro Devices, Inc. InfiniBand, InfiniBand Trade Association and the InfiniBand design marks are trademarks and/or service marks of the InfiniBand Trade Association. Intel, Intel logo, Intel Inside, Intel Inside logo, Intel Centrino, Intel Centrino logo, Celeron, Intel Xeon, Intel SpeedStep, Itanium, and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. IT Infrastructure Library is a registered trademark of the Central Computer and Telecommunications Agency which is now part of the Office of Government Commerce. Java and all Java-based trademarks and logos are trademarks or registered trademarks of Oracle and/or its affiliates. Linear Tape-Open, LTO, the LTO Logo, Ultrium, and the Ultrium logo are trademarks of HP, IBM Corp. and Quantum in the U.S. and other countries. Linux is a registered trademark of Linus Torvalds in the United States, other countries or both. Microsoft, Windows and the Windows logo are registered trademarks of Microsoft Corporation in the United States, other countries or both. NetBench is a registered trademark of Ziff Davis Media in the United States, other countries or both. SPECint, SPECfp, SPECjbb, SPECweb, SPECjAppServer, SPEC OMP, SPECviewperf, SPECapc, SPEChpc, SPECjvm, SPECmail, SPECimap and SPECsfs are trademarks of the Standard Performance Evaluation Corp (SPEC). The Power Architecture and Power.org wordmarks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org. TPC-C and TPC-H are trademarks of the Transaction Performance Processing Council (TPPC). UNIX is a registered trademark of The Open Group in the United States, other countries or both. Other company, product and service names may be trademarks or service marks of others. Revised December 2,