Chapter 15 Product Development and Supply Chain Management

Transcription

1 CHAPTER OUTLINE Spotlight: Lighting the Way to Product Development ( and 1 To Grow or Not to Grow Understand the challenges associated with the growth of a small business. Entrepreneurs prefer differing growth rates Successful growth affected by financing sales volume which then affects inventory requirements Places enormous demands on small firm s personnel and the management style of its owners 2 Innovation: A Path to Growth Explain the role of innovation in a company s growth. Competitive Advantage and Innovation Discuss how a small business can sustain its competitive advantage (example, patents, contract, fly below the radar screen of competitors) Creating and perfecting new products or services can be difficult rules of thumb that may help reduce the risk of failure Base innovative efforts on your experience Focus on products or services that have been largely overlooked Be sure there is a market for the product or service you are hoping to create Pursue innovation that customers will perceive as adding value to their lives Focus on new ideas that will lead to more than one product or service Raise sufficient capital to launch the new product or service Sustainability and Innovation Discuss what a sustainable competitive advantage is and how it affects the business. Sustainable competitive advantage (see Exhibit 15-1 showing the three stages of competitive advantage life cycle) A value-creating position that is likely to endure over time. Must produce a continuous stream competitive advantages to keep performance from falling off 3 The Product Life Cycle and New Product Development Identify stages in the product life cycle and the new product development process. The Product Life Cycle Important to small business owner for three reasons Helps entrepreneur to understand that promotion, pricing, and distribution policies should all be adjusted to reflect a product s position on the curve Highlights the importance of revitalizing product lines, whenever possible, before they die Continuing reminder that the natural life cycle of a product follows a trend that resembles the classic normal curve and, therefore, innovation is necessary for a firm s survival 158

2 The New Product Development Process Idea Accumulation First stage in new product development process Many possible sources listed by authors (see page 451) Business Analysis Four key factors need to be considered in conducting a business analysis The product s relationship to the existing product line. Cost of development and introduction Available personnel and facilities Competition and market acceptance Development of the Physical Product Product Testing 4 Building the Total Product Describe the building of a firm s total product. Branding (Exhibit 15-3 Components of a Brand Identity) Provide the name of a product such as Nike, then a product such as Popsicle. Ask students to tell what they know about each based on the name. They discuss how each relates to brand identity. Then ask the students what they think about when you say Neiman Marcus. Follow with a discussion of the differences among the products and the store branding. Brand is a basic foundation for business. A verbal and/or symbolic means of identifying a product Used to shape a company s future Brand image the overall perception of a brand Brand name a brand that can be spoken Brandmark a brand that cannot be spoken Five rules apply in naming a product Select a name that is easy to pronounce and remember Choose a descriptive name Use a name that is eligible for legal protection Select a name with promotional possibilities Select a name that can be used on several product lines of a similar nature Very valuable to the business, Nike logo and Parking Spot logo good examples Developing an effective logo Tips Be simple Design for visibility Leave it open to interpretation Be relentlessly consistent Recognize the importance of logo design Get good advice Don t expect miracles Trademark and service mark Trademark a legal term identifying a firm s exclusive right to use a brand 159

3 160 Service mark a brand that a company has the exclusive right to use to identify a service Packaging Relate a discussion on packaging back to the discussion on branding. Ask students to indicate how they would expect a product to be packaged from Neiman Marcus as opposed to a Popsicle. Protects the basic product as well as increases the value of the total product Creative packaging affected by financial issues Labeling To display the brand Informative tool for consumers Laws may affect Warranties Warranty a promise that a product will perform at a certain level or meet certain standards Possible factors Cost Service capability Competitive practices Customer perceptions Legal implications 5 Product Strategy Discuss product strategy ad the alternatives available to small businesses. Definitions Product strategy the way the product component of the marketing mix is used to achieve a firm s objectives Product item the lowest common denominator in the product mix-the individual item Product line the sum of related individual product items Product mix the collection of a firm s total product lines Product mix consistency the similarity of product lines in a product mix Product a total bundle of satisfaction - including a service, a good, or bothoffered to consumers in an exchange transaction Product Marketing versus Service Marketing Marketing services present unique challenges that are not faced in product strategy development Exhibit 15-5Services Marketing versus Goods Marketing Product Strategy Options Strategy alternatives of a small business condensed into six categories One product/one market One product/multiple markets Modified product/one market

4 Modified product/multiple markets Multiple products/one market Multiple products/multiple markets Small firm can try to increase sales of an existing product by doing any or all of the following Convince nonusers in the targeted market to become customers Persuade current customers to use more of the product Alert current customers to new uses for the product 6 The Legal Environment Recognize how the legal environment affects product decisions. Consumer Protection Federal regulations have important implication for product strategy Example of two laws Consumer Product Safety Act of 1972 and 2008 Nutrition Labeling and Education Act of 1990 Protection Of Marketing Assets Trademarks Protects a company s distinctive use of a name, slogan, symbol, picture, logo, or combination of these Must be investigated to ensure they are not already in use Registration of trademarks permitted under federal Lanham Trademark Act Must be used properly Make every effort to see that the trade name is not carelessly used as a generic name Inform the public that your trademark is exactly that by labeling it with the symbol TM Patents Definitions Patent the registered, exclusive right of an inventor to make, use, or sell and invention Utility patent registered protection for a new process or a product s function Design patent registered protection for the appearance of a product and its inseparable parts Plant patent registered protection for any distinct, new variety of living plant Copyright the exclusive right of a creator to reproduce, publish, perform, display, or sell his or her own works Lawsuits concerning patent infringements are costly and should be avoided, if possible Copyrights Copyright Act of 1976 Notice consists of three elements 161

5 The symbol The year the work was published The copyright owner s name Trade Dress Elements of a firm s distinctive image not protected by a trademark, patent, or copyright Valuable intangible asset Now relate the protections to the two products and the store discussed previously (Popsicle, Nike and Neiman Marcus). How do each of the protections relate? 7 Supply Chain Explain the importance of supply chain management. Definitions Supply chain management a system of management that integrates and coordinates the ways in which a firm creates or develops a product or service, delivers it to customers and is paid for it. Distribution physically moving products and establishing intermediary relationships to support such movement. Channel of distribution the system of relationships established to guide the movement of a product. Physical distribution (logistics) the activities of distribution involved in the physical relocation of products Discuss how the Internet and new software have affected current supply chain management philosophy. Intermediaries Merchant middlemen intermediaries that take ownership of the goods they distribute Agents / Brokers intermediaries that do not take ownership of the goods they distribute 8 Channels of Distribution Specify the major considerations in structuring a distribution channel. Exhibit 15-7 Channels of Distribution Definitions Direct channel a distribution system without intermediaries Indirect channel a distribution system with one or more intermediaries Dual distribution a distribution system that involves more than one channel Discuss the differences among these types of distribution. The type of Distribution are affected by Costs 162 Least expensive channel may be indirect Determine whether the cost of using intermediaries is more of less expensive than distributing the product directly to customers Coverage indirect channels may increase market coverage Control

6 Direct sometimes preferable because it provides more control Determine how the product is best used and why it s better than competitors offerings The Scope of Physical Distribution Transportation Common carriers transportation intermediaries available for hire to the general public Contract carriers transportation intermediaries that contract with individual shippers Private carriers lines of transport owned by shippers Storage lack of space common for small businesses Materials handling must have a suitable materials-handling methods and equipment Delivery terms Who is responsible for: Paying the freight costs Selecting the carriers Bearing the risk of damage in transit Selecting the modes of transport Third-party logistics firm (3PL) a company that provides transportation and distribution services to firms that prefer to focus their efforts on other business aspects 9 Pulling the Pieces Together Critical tasks of maintaining existing products and developing new ones, carefully planning the product strategy and managing the supply chain must be managed carefully. ANSWERS TO END-OF-CHAPTER DISCUSSION QUESTIONS 1. Discuss some of the limitations on growth in a small firm. As discussed in the chapter, some small firms want growth, while others do not. For those with growth goals financing is a major limiting factor. Internally generated cash flow may not support growth and external funds may be hard to locate. Also, too much growth, too quickly, based on internal funding can be a stress on current operations. A firm s personnel and management style of its owners is also a possible limitation on growth. There simply may not be enough people and/or the right people to cope with the growth. 163

7 2. Describe the recommendations for reducing risk associated with innovation in a small business. The six rules of thumb listed and discussed in the chapter are: a. Base innovative efforts on your experience b. Focus on products or services that have been largely overlooked. c. Be sure there is a market for the product or service you are hoping to create. d. Pursue innovation that customers will perceive as adding value to their lives. e. Focus on new ideas that will lead to more than one product or service. f. Raise sufficient capital to launch the new product or service. 3. How does an understanding of the product life cycle concept help with product strategy? First, it helps the entrepreneur to understand that promotion, pricing, and distribution policies should all be adjusted to reflect a product s position on the curve. Secondly, it highlights the importance of rejuvenating product lines, whenever possible, before they die. Thirdly, it is a continuing reminder that the natural life cycle of a product follows the classic sigmoid curve a tiled S-shaped curve describing the time line of life itself and therefore, that innovation is necessary for a firm s survival. 4. Discuss briefly each stage of the product development process. Idea Accumulation The first stage that starts with the accumulation of ideas from many sources. Business Analysis The next stage where costs and revenues are estimated and analyzed. Any ideas judged not to be profitable are usually discarded here. Development of the Physical Product Here the idea is sketched to detail the plan for branding, packaging, and other supporting efforts. Any actual prototype may be built. Product Testing The last stage is testing of the physical product, maybe in a market test environment 5. Select two product names, and then evaluate each with respect to the five rules for naming a product. 164 Student answers will differ. Names chosen by students may not exemplify all of the rules.

8 6. What are the six basic product strategy options available to a small company? Which ones are most likely to be used? Product strategy describes the manner in which the product component of the marketing mix is used to achieve the objectives of the firm. The major product strategy alternatives can be described by the following six categories: a. One product/one market b. One product/multiple markets c. Modified product/one market d. Modified product/multiple markets e. Multiple products/one market f. Multiple products/multiple markets A small company usually works through the alternatives in the order listed. 7. Identify and briefly describe the three ways to increase sales of an existing product once a product strategy has been implemented. A small firm can try to increase sales of an existing product by doing any of all of the following: Convincing nonusers in the targeted market to become customers Persuading current customers to use more of the product Alerting current customers to new uses for the product 8. Explain how registration of a small firm s trademarks would be helpful in protecting its brand. Because small firms do not have the same level of market exposure as large firms, it is important that they establish and maintain an identity with their current and potential customers. One way of doing this is by establishing an identifying trademark that will help to carry the message of the firm to the market. Once the trademark is registered, the small firm gains valuable protection from larger firms that may be interested in entering the same market and taking away any advantage the small firm may have. 9. Why do small firms need to consider indirect channels of distribution for their products? Why involve intermediaries in distribution at all? Small firms use indirect channels for reasons similar to those of large firms. Primarily, intermediaries exist to carry out unavoidable marketing functions that they can perform better than the producer or the user of a product. It is an accepted premise in marketing that functions of marketing cannot be eliminated, but they can 165

9 be shared and/or shifted. Small firms cannot always perform these necessary functions, and since someone must perform these, intermediaries are involved. 10. Discuss the major considerations in structuring a channel of distribution. Looking at the competition is an important first step in building a channel of distribution, because the competition s experiences can guide the newcomer. Other, more specific elements to consider in structuring a channel are costs, coverage, and control. These are the three Cs of channel choice. Costs associated with an indirect channel of distribution must be evaluated against the expenses that the small business would otherwise incur in performing the function itself. For example, how do the costs of using a wholesaler compare with the costs of selling directly to retailers? Distribution costs should be viewed as an investment. Coverage refers to contacts with potential customers. An indirect channel of distribution can greatly increase market coverage that is, the number of customers or potential customers that can be reached. A direct distribution channel provides more control than an indirect one. For example, a manufacturer can exert more control over retail sales promotion efforts by selling directly to retailers than by going through a wholesaler. All of these facts must be evaluated jointly. COMMENTS ON CHAPTER YOU MAKE THE CALL SITUATIONS 166 Situation 1 1. Where would be the best locations for the MooBella Ice Creamery Machine? Good locations would include malls, movie theaters, Airports, bus stations, school cafeterias, college campuses, and businesses (e.g. lunch rooms, snack areas.) 2. What are the primary advantages and disadvantages of this innovation? The primary advantage of the MooBella ice-cream machine is that labor costs are low. No retail salespeople are needed and it reorders its own ingredients. Limitations include where the vending machines can be located, vandalism, and limited product offerings compared to an ice-cream store. Situation 2 1. What are the advantages and disadvantages of the in-home method of selling Tomboy Tools?

10 The primary advantage of in-home sales is the relationship between the buyers and seller. Often buyers are friends or co-workers of the seller and will feel obligated to buy something. The relaxed friendly atmosphere is also conducive to sales. 2. What other channels of distribution might Tomboy Tools use? The Internet would certainly be worth considering direct mail and personal selling to retailers may also be effective. And don t overlook the potential that companies like Home Depot and Lowe s hold for the Tomboy line of tools. 3. What do you think about the name Tomboy Tools? It is a good one. It is easy to pronounce, distinctive, memorable, and descriptive of the product offering. It resonates with its intended target market women and can used across may product lines. Situation 3 2. What is it about Monster s logo that makes it effective? Hint: What tips does this textbook provide regarding logo design? It is simple, open to interpretation, used consistently across various monster products, is well designed, and eye-catching. 3. How can good packaging help a product? Packaging sets the tone/image for your product and conveys important information about a product. Good packaging is eye-catching and communicates with the consumer at the point of sale 4. Why is labeling an important part of the packaging for energy drinks like Monster? First, the list of the ingredients helps sell the product. Energy drink buyers are looking for certain ingredients. Consumers want to know what they are getting and read closely to compare sugar and caffeine levels as well as the presence of other ingredients SUGGESTED SOLUTION TO CASE 14: GRAETER S ICE CREAM 167

11 1. What distinguishes Graeter s Ice Cream from other ice cream makers and makes its products desirable to consumers? When ice cream makers entered the grocery store market, most competitors built business on volume and lower prices, and quality suffered. Graeter s continued with its timeconsuming Fresh Pot process of spinning the recipe along a chilled container. Its retail outlets offer consumers a distinctive buying experience, and ice cream continues to be the company s staple, enabling the small business to gain a national reputation. 2. While its ice cream was a success from the start, what innovations has the company made to sustain its competitive advantage? Graeter s offers its ice cream in grocery stores, they developed a line of candy and bakery goods, utilized mail-order sales, has an aggressive marketing effort, formed a strong alliance with the Kroger grocery chain, expanded its distribution network to include restaurants and country clubs, and operates an online store that offers overnight shipping in 48 states. Also, the company has diversified its portfolio by offering a line of ice cream cakes and pies, travel packs, and sundaes, in addition to baked goods and candies. The company is committed to further expansion and boosted its production capacity from one factory to three, aiming for distribution to even more supermarkets and grocery stores throughout the country. 3. Cite examples of Graeter s Ice Cream s supply chain management. Explain how the company uses direct channel and indirect channel distribution. Direct channel: Graeter s own stores, mail-order, and online ordering Indirect channel: Grocery stores, restaurants, country clubs 168