THE DISTRIBUTION AND MOBILITY OF HEAVY METALS IN THE SOILS FROM DRAHANY UPLAND
|
|
|
- Stella Bell
- 10 years ago
- Views:
Transcription
1 THE DISTRIBUTION AND MOBILITY OF HEAVY METALS IN THE SOILS FROM DRAHANY UPLAND VOROS DOMINIK 1, GERSLOVA EVA 1, GERSL MILAN 2, ZEMAN JOSEF 1 1 Department of Geological Sciences Masaryk University Kotlarska 2, Brno 2 Department of Agricultural, Food and Environmental Engineering (FA) Mendel University in Brno Zemedelska 1, Brno CZECH REPUBLIC [email protected] Abstract: The main aim of the study was to evaluate a level of contamination by selected elements (zinc, lead, copper and arsenic) in soils from the southeastern part of Drahany Upland. In total, it has been collected forty-eight topsoil samples (DV01 DV48) and sixteen surface water samples (W1 W16). The heavy metal concentration has been detected by X-ray fluorescence spectroscopy (XRF) in the topsoil samples and Atomic Absorption Spectroscopy (AAS) in the surface water samples. The heavy metal mobility has been evaluated by the BCR Sequential Extraction Procedure. The Index of Geoaccumulation (I geo) reported that the study area rang among uncontaminated or moderately contaminated by heavy metals. According to the Coefficient of Industrial Pollution (CIP) the soils are medium contaminated. The BCR method proved that lead and zinc are the most mobile elements under reducible conditions in the natural background soils, otherwise in the soils of excepted contaminated site, heavy metals have been mostly held in residual fraction. The low mobility of cuprum and arsenic has been reported in the soils. In fact, the copper and arsenic are not supposed to being come into the soil environment and into the plants, either. Key Words: soil contamination, environmental chemistry, sequential extraction procedure, heavy metal mobility, index of geoaccumulation INTRODUCTION The heavy metals and metalloids can cause a risk for an ecosystem and the human health, because of a possible toxicity and a bioavailability in soils. The contamination matter is nowadays actual theme because of many released publications (Alloway 2013, Bradl 2005, Hooda 2010). An origin of heavy metals may come from natural or anthropogenic sources. It is very important to distinguish individual species of heavy metals because some forms of heavy metals are supposed to be more mobile and their releases a long way throughout the soil environment (Sposito 2008). The slight changes in surrounding environmental conditions such as ph and Eh lead very often to metals remobilization. In the last part, the main aim of the study was to evaluate a level of contamination by selected elements (lead, cuprum, zinc and arsenic) in soils from the southeastern part of Drahany Upland and from the expected contaminated site (ECS). The Drahany Upland is spread out among the cities Brno, Vyskov, Prostejov, Boskovice and Konice. The area occupies km 2 and extends to the north from the city Brno. The Cambisols are the most widespread soils in the area (Kozak et al. 2009). These soils are created by weathering of the bedrocks and they are most enriched by an organic matter (Kabata-Pendias 2001). The main source of inorganic elements in the soils comes from the Paleozoic sequences. There are not present industrial sources of pollution in the region. 604 P age
2 MATERIAL AND METHODS Soil sampling has been passed off into the two groups (background samples) and the expected contaminated site (ECS). The topsoil samples from meadows and woods have been dried and homogenized. The 40 g of sieved soil material (below µm) was weighted down. The Delta Professional Handheld XRF Analyzer has been used to measuring heavy metal contents in topsoil samples. That device has been calibrated and the Mode Geochem-Vanad was used. The time of measuring was 280 seconds. Surface waters, taking from pools and brooks (Hloucela, Klestinek and Bila Voda), have been stabilized 0.5 ml nitric acid/100 ml of sample and analyzed by the Sollar M5- Atomic Absorption Spectroscopy (AAS). A mobility of chosen trace elements has been evaluated in 10 topsoil samples using the BCR Sequential Extraction Procedure (Zemberyova et al. 2006). This method allows us to evaluate heavy metals mobility in the acid (step 1), reducible (step 2) and oxidizable (step 3) environment. The residual fraction presents non-silicate bound metals and they are not expected to release under normally conditions in a nature (Tessier et al. 1979). Sequential Extraction Procedure The soil materials have been leached the reagents with an increasing intensity within steps described below (see Table 1). Table 1 BCR three-step Seqential Extraction Procedure Extraction step Reagent(s) 1 CH 3COOH (40 ml 0.11 mol l -1 ) 2 NH 2OH HCl (40 ml 0.5 mol l -1 ) H 2O 2 (10 ml 8.8 mol l -1 ) 3 then CH 3COONH 4 (50 ml 1 mol l -1 ), ph 2 Residual Agua regia Step 1: Into the bottle with 1 g of solid material was added 40 ml of 0.11 mol l -1 acetic acid and it was shaken for the 16 hours at room temperature. The extract was separated by centrifugation and decanted into a polyethylene container and stored at 4 C for analysis. The residuum was used to another step after it had been washed with 20 ml distilled water by shaking for 20 minutes and recentrifuged. Step 2: Into the residuum from step 1 was added 40 ml of 0.5 mol l -1 hydroxylamine hydrochloride and to have a ph 1.5 it was needed to pour 25 ml of 8.8 mol l -1 nitric acid. The solution was shaken for 16 hours at room temperature and centrifugated as well. Into the step 2 residuum was added 10 ml of 8.8 mol l -1 hydrogen peroxide. The solution was digested for an hour at room temperature and occasionally shaken. The watch glass with the solution was heated at 85 C in a water bath for an hour and subsequently it was poured another 10 ml 8.8 mol l -1 of hydrogen peroxide and digestion was repeated. It was added 50 ml of 1 mol l -1 ammonium acetate after the residuum had been cooled down. The shaking and centrifugation were done in the same manner explained above. The metal amount in solid materials has been detected by the method of Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES). The level of soil contamination has been evaluated by the Index of Geoaccumulation (Turekian, Wedepohl 1961) and with the Coefficient of Industrial Pollution (Kribek et al. 2014). According to Czech Technical Standard ISO (CSN 2011) it has been measured Soil Potential Reaction (ph/kcl) within thirteen topsoil samples from the ECS. RESULTS AND DISCUSSION Lead distribution The lead contents in topsoil samples from natural background reached 80 mg kg -1, DV22; 50 mg kg -1, DV08; 60 mg kg -1, DV24 and 65 mg kg -1, DV28. These soil materials showed as approximately twice higher lead content as the rest of them around 30 mg kg -1. The higher lead concentration in soils may be related to the weathering of surrounding bedrock in the Stribrna Hill, which is situated in the southeastern part of Drahany Upland. There are galena and cerussite veins (Posmourny 2000). According to the I geo values, the natural background soils are supposed to be uncontaminated as far as moderately contaminated by lead and that area belongs to the category I geo 1 2 (see Figure 1). 605 P age
3 Zinc, copper and arsenic distribution The zinc contents in topsoil samples from natural background reached 89 mg kg -1, DV08; 105 mg kg -1, DV22; 92 mg kg -1, DV24 and 52 mg kg -1, DV28. The copper contents contained in topsoil samples DV24, 36 mg kg -1 ; DV22, 15 mg kg -1 ; DV08, 8 mg kg -1 and DV28, 5 mg kg -1 and arsenic concentration reached values 21 mg kg -1, DV22; 21 mg kg -1, DV28; 18 mg kg -1, DV08; 17 mg kg -1, DV24. According to the I geo values the natural background soils seem to be uncontaminated by zinc (I geo category 1; see Figure 2), copper (I geo category 0 1) and arsenic (I geo category 1). Apparently, the enrichment of those inorganic elements in soils comes from natural sources, comparing with the copper, arsenic and zinc natural contents in fluvial sediments in the southeastern part of Drahany Upland (Abraham et al. 1994). Figure 1 Lead distribution through the soils from southeastern part of Drahany Upland Figure 2 Zinc distribution through the soils from southeastern part of Drahany Upland Lead mobility In the natural background soils has lead been released under acid conditions less of the 9% total lead amount, therefore the higher lead contents, µg l -1, have been noticed in pools and backwaters (see Figure 3), nearby the soils that are moderately contaminated I geo 1 2. Measured lead values in surface water samples exceeded values both natural background W1 12 and W13 W16 from ECS as well, except of not detected samples, determining by the Regulation of Government No. 61/2003, Coll. (MZP 2015). The lead mobility has mostly noticed in reducible fraction which is bound to Fe-Mn oxides (Tessier et al. 1979). The lead concentration in an extract reached values mg l -1, DV08; mg l -1, DV22; mg l -1, DV24 and mg l -1, DV28, therefore lead appears to be readily mobile under reduction conditions, almost 50% total amount (see Figure 4). Figure 3 Lead concentration in the surface water samples from southeastern part of Drahany Up- Figure 4 Percent amount of released lead in the soils samples from natural back- 606 P age
4 Zinc, copper and arsenic mobility However, the nearby natural waters have been enriched by zinc, increasing of the measured values has been noticed in pools (samples W2, W3, W5 and W6) around east margin of the ECS (see Figure 5). The zinc mobility has mostly noticed in reducible fraction, because the most amount of dissolved zinc was detected in the topsoil samples DV08, mg l -1 ; DV22, mg l -1 ; DV24, mg l -1 and DV28, mg l -1, therefore we suppose to zinc is readily mobile under reduction conditions of approximately 50% total amount (see Figure 6). The copper content has not been detected in the natural background surface waters (W1 W12) neither arsenic, so it was under acid conditions releasing into the soil of <0.005 mg l -1 copper and <0.007 mg l -1 arsenic, nonetheless their mobility is negligible, because the overwhelming majority of copper (>85%) and arsenic content (>89%) has been held in residual fraction and these elements are not supposed to be transported throughout the soil environment because the fraction presents non-silicate bound metals and they are not expected to release under normally conditions in a nature (Tessier et al. 1979). Figure 5 Zinc concentration in the surface water samples from southeastern part of Drahany Upland Figure 6 Per cent amount of released zinc in the soil samples from natural background Expected contaminated site This area serves as a training facility for an individual training of military personnel and is divided to the training ranges. Lead concentration reached mostly higher values in top soil samples taking from a range of Hand-Thrown Grenades DV43, 288 mg kg -1 ; DV44, 181 mg kg -1 and DV48, 142 mg kg -1 and of Infantry Shooting Range DV45, 134 mg kg -1 ; DV46, 293 mg kg -1 and DV47, 455 mg kg -1. According to the Coefficient of Industrial Pollution the soils are medium contaminated by heavy metals (see Figure 7) and in the surroundings of ranges the soils appear to be particularly similar to the natural background. The ph/kcl is ranged from 3.2 to 6.6 in the soils which are not affected by anthropogenic activity. The alkaline soils have been evaluated in a range of Hand-Thrown Grenades (range of ) and intensively acid soils at an Infantry of Shooting Range ( ). The oxidative conditions ( mv) are presented in the soils. The soil alkalinity prevents from the heavy metal mobilization, otherwise in the acid conditions may be lead and zinc remobilized (Kabata-Pendias 2001). Heavy metals mobility The lead, zinc and copper concentration are presented in natural waters, so called pools at an Infantry Shooting Range within surface water samples (W15 W16). These waters have been most enriched by copper (139.6 µg l -1 ), zinc (89.3 µg l -1 ) and lead (944.5 µg l -1 ) as well. The copper ( µg l -1 ), zinc ( µg l -1 ) and lead ( µg l -1 ) dissolution have been reported under mildly acidic condition. The origin of lead, zinc and copper in soils may come from the ammunition. A brass (compound of zinc and copper) is meant to make cartridge casing and lead is used to increase penetrative power of a bullet (Plihal 2010). The overwhelming majority of lead (>75%; see Figure 8), zinc (>85%; see Figure 9), copper (>85%) and arsenic content (>96%) have been held in residual fraction and these elements are not supposed to be mobilized through the soil environment. 607 P age
5 Figure 7 Soil contamination map of the ECS in southeastern part of Drahany Upland. Figure 8 Per cent amount of released lead in the soil samples from the ECS Figure 9 Per cent amount of released zinc in the soil samples from the ECS CONCLUSION It was evaluated soil contamination by lead, zinc, copper and arsenic and their mobility in the southeastern part of Drahany Upland. The natural background soils are uncontaminated by zinc, copper and arsenic, otherwise moderately lead contamination have been reported. Among the most mobile inorganic elements belong to the natural background soils zinc and lead. They are supposed to be readily mobilized under reduction condition through the soil environment and bioavailable for the biota (Fedotov, Miro 2007). The totally copper and arsenic immobilization in the natural background soils prevent to the possible bound into the biota. On the other hand, the ECS soils are medium contaminated by selected elements, which are all of them mostly immobilized, therefore they cannot come to the biota (Fedotov, Miro 2007). According to the total mobile fraction, the heavy metal mobility in soils decreases in following order: Zn>Pb>Cu>As. REFERENCES Abraham M., Simek J., Luna J., Svestka J., Hulka L., Zacek M., Haje J., Grym V The regional heavy mineral prospecting in the Czech Republic, atlas of maps 1: , sheet 24 Brno: Brno. Ministry of Economy CR. Alloway B. J. [ed.] Heavy Metals in Soils, Trace Metals and Metalloids in Soils and their Bioavailability. 3 rd ed: Reading. Springer. Bradl H. B. [ed.] Heavy metals in the Environment: origin, interaction and remediation, 1 st edition: London. Elsevier Academic Press. CSN ISO The soil quality determination of ph. 2 nd ed.: Geneva. The Office for Standards, Metrology and Testing. Fedotov P. S., Miro M., Violante A. [ed.], Huang P. M. [ed.], Gadd G. F. [ed.] Fractionation and mobility of trace elements in soils and sediments. In: Biophysico-chemical processes of heavy metal and metalloids in soil environments: Hoboken. John Wiley & Sons, Inc. Hooda P. S. [ed.] Trace elements in soils: Chichester. John Wiley & Sons, Ltd. 608 P age
6 Kabata-Pendias A Trace elements in soils and plants. 3 rd edition: Florida. CRC Press. Kozak J., Nemecek J., Boruvka L., Lerova Z., Nemecek K., Kodesova R., Janku J., Jacko K., Hladik K., Zadorova T Soil Atlas of Czech Republic. 2 nd revised edition: Prague. Czech University of Agriculture. Kribek B., Majer V., Pasava J., Knesl I., Kamona F., Mapani B., Mwiya S., Kawali L., Kandjii I., Keder J Impact of ore processing on the environment in the Tsumeb area, Namibia. Communs Geological Survey of Namibia, 15: MZP Government Regulation No. 61/2003 Coll., on indicators and values of permissible surface water pollution and wastewater treatment, details of the permit to discharge wastewater into the surface water and into the sewerage systems, and on sensitive areas, as amended by the Government Regulation No. 229/2007 Coll., and the Government Regulation No. 23/2011 [online] April 30, Available from: NV_61_ pdf Plihal B Ammunition sets III: Ecology in ammunition disposal and explosives: Brno. University of Defence. Posmourny K Mineral deposits. In: Explanatory notes to the file of geological an environmental thematic map of natural resources at a scale of 1:50 000, a sheet Protivanov: Prague. Czech Geological Survey. Sposito G The chemistry of soils. New York: Oxford University Press. Tessier A., Campbell P. G. C., Bisson M Sequential Extraction Procedure for the Speciation of Particulate Trace Metals. Analytical Chemistry, 51(7): Turekian K. H., Wedepohl, K. H Distributions of the elements in some major units of the earth s crust. Geological Society of America Bulletin, 72(2): Zemberyova M., Bartekova, J., Hagarova, I The utilization of modified BCR three-step sequential extraction procedure for the fractionation of Cd, Cr, Cu, Ni, Pb and Zn in soil reference material of different origins. Talanta, 70(5): P age
HS 1003 Part 2 HS 1003 Heavy Metals Test
HS 1003 Heavy Metals Test 1. Purpose This test method is used to analyse the heavy metal content in an aliquot portion of stabilised hot acetic acid extract by Atomic Absorption Spectroscopy (AAS). Note:
UNITED STATES CONSUMER PRODUCT SAFETY COMMISSION DIRECTORATE FOR LABORATORY SCIENCES DIVISION OF CHEMISTRY 5 RESEARCH PLACE ROCKVILLE, MD 20850
UNITED STATES CONSUMER PRODUCT SAFETY COMMISSION DIRECTORATE FOR LABORATORY SCIENCES DIVISION OF CHEMISTRY 5 RESEARCH PLACE ROCKVILLE, MD 20850 Test Method: CPSC-CH-E1001-08.2 Standard Operating Procedure
ANALYTICAL REPORT LABORATORY DETAILS. Telephone Facsimile Email. SGS Reference Report Number Date Reported Date Received
ANALYTICAL REPORT CLIENT DETAILS Contact Client Address Matthew Behre SGS Metallurgical Services 431 Victoria Street Malaga MALAGA WA 6090 LABORATORY DETAILS Manager Laboratory Address Said Hirad SGS Newburn
Elemental Analyses by ICP-AES
Elemental Analyses by ICP-AES Henry Gong, Senior Analytical Chemist September 10, 2008 ICP-AES inductively coupled plasma atomic emission spectrophotometry Electrons of an atom absorb energy and jump to
Lead Distribution and Mobility in a Soil Embankment Used as a Bullet Stop at a Shooting Range
Journal of Soil Contamination, 8(6):653 665 (1999) Lead Distribution and Mobility in a Soil Embankment Used as a Bullet Stop at a Shooting Range Thomas Astrup, Jens K. Boddum, and Thomas H. Christensen*
Metal Ion + EDTA Metal EDTA Complex
Simplified Removal of Chelated Metals Sultan I. Amer, AQUACHEM INC. Metal Finishing, April 2004, Vol. 102 No. 4 Chelating agents are used in large quantities in industrial applications involving dissolved
Certificate of Analysis
The Japan Society for Analytical Chemistry Certificate of Analysis Certified Reference Material JSAC 0602-3 Plastics (tip form) for Chemical Analysis of Hazardous Metals This certified reference material
Sequential leaching procedure tool for risk assessment of contaminated sites
Sequential leaching procedure tool for risk assessment of contaminated sites Juhani Kaakinen Chief of Environmental Protection Unit Environment and Natural Resources HIGHBIO2 2011-2013 PROJECT SEMINAR
EXPERIMENT 5. Molecular Absorption Spectroscopy: Determination of Iron With 1,10-Phenanthroline
EXPERIMENT 5 Molecular Absorption Spectroscopy: Determination of Iron With 1,10-Phenanthroline UNKNOWN Submit a clean, labeled 100-mL volumetric flask to the instructor so that your unknown iron solution
Preparation of frequently used solutions
Preparation of frequently used solutions Content 1. Diluting Concentrated Acids (Last Login: 08/08/2009) 2. Indicators (Last Login: 27/07/2009) 3. Standard Buffer Solutions (Last Login: 27/07/2009) 4.
CHEMICAL REACTIONS OF COPPER AND PERCENT YIELD KEY
CHEMICAL REACTIONS OF COPPER AND PERCENT YIELD Objective To gain familiarity with basic laboratory procedures, some chemistry of a typical transition element, and the concept of percent yield. Apparatus
Dinamica degli inquinanti
Dinamica degli inquinanti Characterization techniques Renato Baciocchi University of Rome Tor Vergata, Rome, Italy Characterization techniques Preparation Water content Loss on Ignition, LOI Alkaline extraction
Heavy Metal Analysis for the Toy Industry by Inductively Coupled Plasma Optical Emission Spectroscopy
Heavy Metal Analysis for the Toy Industry by Inductively Coupled Plasma Optical Emission Spectroscopy In support of the toy industry, many laboratories are being called upon to analyze a wide variety of
Environmental Water Testing: Surface Water, Groundwater, Hard Water, Wastewater, & Seawater
Document: AND Sol Env 08 2013 Environmental Water Testing: Surface Water, Groundwater, Hard Water, Wastewater, & Seawater Matrix specific sample preparation and testing methods for environmental waters
Holcim EMR List of EN Standards and VDI Guidelines usable for Discontinuous Measurements in Cement Plants
Holcim EMR List of EN Standards and VDI Guidelines usable for Discontinuous Measurements in Cement Plants Version 2004-01 / August 2004 (HGRS-JW-04-25s) HGRS-CTS/MT J. Waltisberg SUMMARY ( ) shall not
Soil Acidity Ranking, Soil Sensitivity and Vulnerability to Acid Deposition in the Northeast Region of Thailand
2010 International Conference on Biology, Environment and Chemistry IPCBEE vol.1 (2011) (2011) IACSIT Press, Singapore Soil Acidity Ranking, Soil Sensitivity and Vulnerability to Acid Deposition in the
Final Report for Lead at Shooting Ranges
Final Report for Lead at Shooting Ranges U.S. Forest Service for Participating Agreement #01 PA11080821-090 October 3, 2005 J. Donald Rimstidt & James R. Craig Department of Geosciences 4044 Derring Hall
Determination of Metals in a 3% Sodium Chloride (NaCl) Matrix by Axially-Viewed ICP-OES
Determination of Metals in a 3% Sodium Chloride (NaCl) Matrix by Axially-Viewed ICP-OES Application Note Inductively Coupled Plasma-Optical Emission Spectrometers Author Deen Johnson Introduction The development
Dimethylglyoxime Method Method 10220 0.1 to 6.0 mg/l Ni TNTplus 856
Nickel DOC316.53.01065 Dimethylglyoxime Method Method 10220 0.1 to 6.0 mg/l Ni TNTplus 856 Scope and application: For water and wastewater. Test preparation Instrument-specific information Table 1 shows
DigiBlock Sample Preparation System APPLICATION NOTES LABTECH INC. Your Lab, Our Tech
E D 3 6 & E H D 3 6 DigiBlock Sample Preparation System APPLICATION NOTES LABTECH INC. Your Lab, Our Tech CONTENT 1 ENVIRONMENTAL... 5 1.1 SOIL... 5 1.2 WASTE WATER... 6 2 FOOD... 7 2.1 RICE... 7 2.2
IB Chemistry. DP Chemistry Review
DP Chemistry Review Topic 1: Quantitative chemistry 1.1 The mole concept and Avogadro s constant Assessment statement Apply the mole concept to substances. Determine the number of particles and the amount
OLIVÉR BÁNHIDI 1. Introduction
Materials Science and Engineering, Volume 39, No. 1 (2014), pp. 5 13. DETERMINATION OF THE ANTIMONY- AND STRONTIUM- CONTENT OF ALUMINIUM ALLOYS BY INDUCTIVELY COUPLED PLASMA ATOM EMISSION SPECTROMETRY
NUTC R304. Use of Absorption Mechanisms to Decrease Heavy Metal Mobility
Use of Absorption Mechanisms to Decrease Heavy Metal Mobility by Jianmin Wang Honglan Shi Joe G. Burken NUTC R304 A National University Transportation Center at Missouri University of Science and Technology
Determination of a Chemical Formula
1 Determination of a Chemical Formula Introduction Molar Ratios Elements combine in fixed ratios to form compounds. For example, consider the compound TiCl 4 (titanium chloride). Each molecule of TiCl
1. Qualitative Analysis of Chromium, Iron, and Copper
1. Qualitative Analysis of Chromium, Iron, and Copper Introduction We have used copper and iron as basic materials since the Bronze and Iron Ages, but our extensive use of chromium began only after the
Revealing the costs of air pollution from industrial facilities in Europe a summary for policymakers
Revealing the costs of air pollution from industrial facilities in Europe a summary for policymakers A new European Environment Agency (EEA report, Revealing the costs of air pollution from industrial
How to measure Ammonia and Organic Nitrogen: Kjeldahl Method
World Bank & Government of The Netherlands funded Training module # WQ - 38 How to measure Ammonia and Organic Nitrogen: Kjeldahl Method New Delhi, March 2000 CSMRS Building, 4th Floor, Olof Palme Marg,
Characterization of Contaminated Soil and Surface Water/ Ground Water Surrounding Waste Dump Sites in Bangalore
International Journal of Environmental Research and Development. ISSN 2249-3131 Volume 4, Number 2 (2014), pp. 99-104 Research India Publications http://www.ripublication.com/ijerd.htm Characterization
Restoration of contaminated Elbe River floodplain soils by phytoremediation
Restoration of contaminated Elbe River floodplain soils by phytoremediation R. Meissner, S. Bolze, H. Rupp- Helmholtz Centre for Environmental Research - UFZ C. Baum, D. Zimmer, P. Leinweber University
EXPERIMENT 7 Reaction Stoichiometry and Percent Yield
EXPERIMENT 7 Reaction Stoichiometry and Percent Yield INTRODUCTION Stoichiometry calculations are about calculating the amounts of substances that react and form in a chemical reaction. The word stoichiometry
The Empirical Formula of a Compound
The Empirical Formula of a Compound Lab #5 Introduction A look at the mass relationships in chemistry reveals little order or sense. The ratio of the masses of the elements in a compound, while constant,
Removing Thallium from Industrial FGD Scrubber Water with Sorbster Adsorbent Media
Case History MAR Systems Inc. Removing Thallium from Industrial FGD Scrubber Water with Sorbster Adsorbent Media Trace thallium levels in process and wastewater streams pose a human toxicity threat. Tidwell
EXPERIMENT 12: Empirical Formula of a Compound
EXPERIMENT 12: Empirical Formula of a Compound INTRODUCTION Chemical formulas indicate the composition of compounds. A formula that gives only the simplest ratio of the relative number of atoms in a compound
Dissolved Mineral Radioactivity in Drinking Water
WD-WSEB-3-11 2004 Dissolved Mineral Radioactivity in Drinking Water General New Hampshire's bedrock contains naturally occurring radioactivity. A few examples with health importance include radon, radium
Oxidation States of Copper Two forms of copper oxide are found in nature, copper(i) oxide and copper(ii) oxide.
The Empirical Formula of a Copper Oxide Reading assignment: Chang, Chemistry 10 th edition, pp. 55-58. Goals The reaction of hydrogen gas with a copper oxide compound will be studied quantitatively. By
SPIKE RECOVERY AND DETERMINING A METHOD DETECTION LIMIT Pamela Doolittle, University of Wisconsin Madison, [email protected] 2014
SPIKE RECOVERY AND DETERMINING A METHOD DETECTION LIMIT Pamela Doolittle, University of Wisconsin Madison, [email protected] 2014 This experiment explores quality assurance practices which are commonly
Bioremediation. Introduction
Bioremediation Introduction In the twentieth century, the ever increase in the global human population and industrialization led to the exploitation of natural resources. The increased usage of heavy metals
IUCLID 5 COMPOSITION AND ANALYSIS GUIDANCE DOCUMENT: IRON ORES, AGGLOMERATES [EINECS NUMBER 265 996 3, CAS NUMBER 65996 65 8] IRON ORE PELLETS
IUCLID 5 COMPOSITION AND ANALYSIS GUIDANCE DOCUMENT: IRON ORES, AGGLOMERATES [EINECS NUMBER 265 996 3, CAS NUMBER 65996 65 8] IRON ORE PELLETS INTRODUCTION Each REACH registrant is required to file its
Determination of calcium by Standardized EDTA Solution
Determination of calcium by Standardized EDTA Solution Introduction The classic method of determining calcium and other suitable cations is titration with a standardized solution of ethylenediaminetetraacetic
Lab #13: Qualitative Analysis of Cations and Anions
Lab #13: Qualitative Analysis of Cations and Anions Objectives: 1. To understand the rationale and the procedure behind the separation for various cations and anions. 2. To perform qualitative analysis
Recovery of Elemental Copper from Copper (II) Nitrate
Recovery of Elemental Copper from Copper (II) Nitrate Objectives: Challenge: Students should be able to - recognize evidence(s) of a chemical change - convert word equations into formula equations - perform
NANOCOMPOSIX'S GUIDE TO ICP-MS MEASUREMENT
NANOCOMPOSIX'S GUIDE TO ICP-MS MEASUREMENT AND ANALYSIS SEPTEMBER 2012, V 1.1 4878 RONSON CT STE K SAN DIEGO, CA 92111 858-565 - 4227 NANOCOMPOSIX.COM Note to the Reader: We at nanocomposix have published
This example of a completed sampling plan worksheet has been included to illustrate the information
APPENDIX B EXAMPLE OF A COMPLETED SAMPLING PLAN WORKSHEET This example of a completed sampling plan worksheet has been included to illustrate the information necessary to document a sampling program for
HEAVY METALS IN THE UPPER AND MIDLE ODRA RIVER SYSTEM RECOMMENDATIONS FOR TRANSBOUNDRY RIVER CHEMICAL MONITORING
HEAVY METALS IN THE UPPER AND MIDLE ODRA RIVER SYSTEM RECOMMENDATIONS FOR TRANSBOUNDRY RIVER CHEMICAL MONITORING E. Adamiec, E. Helios Rybicka, M. Skwarczek University of Mining and Metallurgy, Faculty
Trace Metals in Traditional Chinese Medicine: A Preliminary Study Using ICP-MS for Metal Determination and As Speciation
Trace Metals in Traditional Chinese Medicine: A Preliminary Study Using ICP-MS for Metal Determination and As Speciation Xiaoru Wang, Zhixia Zhuang, Dahai Sun, Jiangxing Hong, and Xihong Wu Chemistry Department,
Standard methods in water analysis
Branch General analytical laboratories; water analysis Keywords Water analysis; standard methods; ASTM; DIN; ISO; USP; EPA; SLMB; EN; SCA; titration; ion chromatography; voltammetry; branch 1; branch 2
Impact of utilised bottom ash
Impact of utilised bottom ash Raul Grönholm, MSc, Sysav Jan Hartlén, PhD, JH Geoconsulting 24 januari 2012 1 Agenda SYSAV BOTTOM ASH FROM WASTE INCINERATION USE OF BOTTOM ASH MONITORING AND ESTIMATION
FDEP Soil Cleanup Target Level Residential soil = 400 ppm Industrial soil = 920 ppm. Arsenic is a known human carcinogen EPA regulation
Environmental Impacts of Lead Pellets at Shooting Ranges in Florida Lena Q. Ma, Ming Chen, and Willie G. Harris Soil & Water Science Department University of Florida Acknowledgment Principle investigators
Solutions and Dilutions
Learning Objectives Students should be able to: Content Design a procedure for making a particular solution and assess the advantages of different approaches. Choose the appropriate glassware to ensure
Lead Testing and On Site Calibration for Water Testing Detection Range: 2 100ppb
Document: AND Lead 100 7 2013 Lead Testing and On Site Calibration for Water Testing Detection Range: 2 100ppb July, 2013 Edition 1 ANDalyze, Inc., 2012. All rights reserved. Printed in USA. Table of Contents
Secondary Lead Smelting
Secondary Lead Smelting Secondary Lead Smelting Objectives Describe the basic smelting process terms: smelting, refining, and alloying List key chemicals associated with secondary lead smelting Define
A Low Cost Chemical Remediation Technology for Heavy Metals in Shipyard Stormwater. SBIR Topic N06 133
A Low Cost Chemical Remediation Technology for Heavy Metals in Shipyard Stormwater SBIR Topic N06 133 1 Normal Ave, CSAM RI 121A Montclair, NJ 07043 973 655 7385 SIROM TECHNOLOGY SIROM has developed a
Chapter 3 Mass Relationships in Chemical Reactions
Chapter 3 Mass Relationships in Chemical Reactions Student: 1. An atom of bromine has a mass about four times greater than that of an atom of neon. Which choice makes the correct comparison of the relative
Scientific and analytical consultancy services for industry
Scientific and analytical consultancy services for industry EXPERTISE ON SITE AND IN THE LABORATORY Anchem Laboratories is a multi-disciplined accredited Laboratory offering a range of specialised environmental
EL724. Biodegradable Resin Products [EL724-2002/2/2003-114]
EL724. Biodegradable Resin Products [EL724-2002/2/2003-114] 1. Scope The criteria shall apply to the product formed and manufactured mainly based on biodegradable resin of single quality or more than two
Material Safety Data Sheet 1100/105 Sikkerheds Data Blade (MSDB)
June 15 1100/105 Sikkerheds Data Blade (MSDB) : Silver Brazing Filler Metals (Metalli Range) Metalli as Materiale Safety Data Sheet (MSDB) @ Copyright, Metalli as, 2015 Side 1 af 5 INDEX AND REVISION STATUS
OXIDATION-REDUCTION TITRATIONS-Permanganometry
Experiment No. Date OXIDATION-REDUCTION TITRATIONS-Permanganometry INTRODUCTION Potassium permanganate, KMnO 4, is probably the most widely used of all volumetric oxidizing agents. It is a powerful oxidant
Subject: Technical Letter 22 April 1977 Removal of Water Supply Contaminants -- Copper and Zinc
STATE OF ILLINOIS Department of Registration and Education JOAN G. ANDERSON DIRECTOR. SPRINGFIELD BOARD OF NATURAL RESOURCES AND CONSERVATION JOAN G. ANDERSON CHAIRMAN BIOLOGY THOMAS PARK CHEMISTRY H.
SODIUM CARBOXYMETHYL CELLULOSE
SODIUM CARBOXYMETHYL CELLULOSE Prepared at the 28th JECFA (1984), published in FNP 31/2 (1984) and in FNP 52 (1992). Metals and arsenic specifications revised at the 55 th JECFA (2000). An ADI not specified
ACID-BASE TITRATIONS: DETERMINATION OF CARBONATE BY TITRATION WITH HYDROCHLORIC ACID BACKGROUND
#3. Acid - Base Titrations 27 EXPERIMENT 3. ACID-BASE TITRATIONS: DETERMINATION OF CARBONATE BY TITRATION WITH HYDROCHLORIC ACID BACKGROUND Carbonate Equilibria In this experiment a solution of hydrochloric
Portable X-ray fluorescence Spectroscopy. Michael A. Wilson Research Soil Scientist USDA-NRCS National Soil Survey Center Lincoln, NE
Portable X-ray fluorescence Spectroscopy Michael A. Wilson Research Soil Scientist USDA-NRCS National Soil Survey Center Lincoln, NE OBJECTIVES Background of the method Features of the instrument Applications
Environmental Technology March/April 1998
Treating Metal Finishing Wastewater Sultan I. Amer, Ph.D. AQUACHEM INC. Environmental Technology March/April 1998 Wastewater from metal finishing industries contains high concentrations of contaminants
CHAPTER 7. Conclusions
CHAPTER 7 Conclusions 7.1 Environmental conclusions The conclusions in this section incorporate the work that was carried out to examine the chemical characteristics of each of the mine sites and their
The ECN Concept for Quality Assurance of Compost
The ECN Concept for Quality Assurance of Compost The ECN Quality Assurance Scheme 1 Targets and Structure of ECN-QAS 2 Quality Assurance Organisations 3 The ECN-QAS for Compost The ECN - Quality Assurance
Question Bank Electrolysis
Question Bank Electrolysis 1. (a) What do you understand by the terms (i) electrolytes (ii) non-electrolytes? (b) Arrange electrolytes and non-electrolytes from the following substances (i) sugar solution
A User s Guide for the Ambient Water Quality Guidelines for Cadmium
A User s Guide for the Ambient Water Quality Guidelines for Cadmium What is a Water Quality Guideline? The British Columbia Ministry of Environment develops ambient water quality guidelines (WQGs) to assess
Thermo Scientific HyperSep Solid Phase Extraction Method Development Guide
chromatography Thermo Scientific HyperSep Solid Phase Extraction Method Development Guide The following guide provides considerations, tips and general guidelines for developing SPE methods using the Thermo
Paladin Energy. Development & Expansion of the Langer Heinrich Operation in Namibia. June 2009
Paladin Energy Development & Expansion of the Langer Heinrich Operation in Namibia June 2009 1 Disclaimer This presentation includes certain statements that may be deemed forward-looking statements. All
SCH 4C1 Unit 2 Problem Set Questions taken from Frank Mustoe et all, "Chemistry 11", McGraw-Hill Ryerson, 2001
SCH 4C1 Unit 2 Problem Set Questions taken from Frank Mustoe et all, "Chemistry 11", McGraw-Hill Ryerson, 2001 1. A small pin contains 0.0178 mol of iron. How many atoms of iron are in the pin? 2. A sample
Safety Data Sheet Aluminium profiles Apply for alloys Sapa EN AW 6060, 6063, 6005, 6005A, 6082, yellow chromated, with or without powder coating.
Apply for alloys Sapa EN AW 6060, 6063, 6005, 6005A, 6082, yellow chromated, with or without powder coating. 1. Identification of the Substance/Preparation and Company Product name: (Alloys, Sapa EN AW
Oxidizer(s) Management and Use Guidelines
Facilities and Campus Services EHS/RMS 3101 Science Circle CPISB Room 102B Anchorage, AK 99508 Oxidizer(s) Management and Use Guidelines This document provides information concerning the handling, storage,
Potassium Aluminium Silicate (Mica) Chemical and Technical Assessment (CTA) Prepared by Daniel E. Folmer, Ph.D., and reviewed by Madduri V. Rao, Ph.D.
Potassium Aluminium Silicate (Mica) Chemical and Technical Assessment (CTA) Prepared by Daniel E. Folmer, Ph.D., and reviewed by Madduri V. Rao, Ph.D. 1. Summary Potassium aluminium silicate (PAS) was
Environmental risk managements of mine wastes (from planning to aftercare) Marja Liisa Räisänen ELY-centre for Kainuu
Environmental risk managements of mine wastes (from planning to aftercare) Marja Liisa Räisänen ELY-centre for Kainuu Mine wastes, what they are? Environmental characteristics, characterization How to
Ion Selective Electrodes
Ion Selective Electrodes OAKTON has a large selection of Ion Selective Electrodes () to suit a wide variety of applications. Each electrode has a typical response time of 20 to 30 seconds but will vary
Complexometric Titrations
Complexometric Titrations Complexometric titrations are based on the formation of a soluble complex upon the reaction of the species titrated with the titrant. M + L ML In the module Chemistry 2 you were
APPLICATION OF ICP-MS TECHNOLOGY FOR TRACE METALS ANALYSIS
MR. TELLIARD: Our next speaker is Paula Hogg. Paula is currently a lab manager at Hampton Roads Sanitation District s Central Environmental Laboratory. We would like to also thank Hampton Roads for sending
5.111 Principles of Chemical Science
MIT OpenCourseWare http://ocw.mit.edu 5.111 Principles of Chemical Science Fall 2008 For information about citing these materials or our Terms of Use, visit: http://ocw.mit.edu/terms. Page 1 of 10 pages
W1 WORKSHOP ON STOICHIOMETRY
INTRODUCTION W1 WORKSHOP ON STOICHIOMETRY These notes and exercises are designed to introduce you to the basic concepts required to understand a chemical formula or equation. Relative atomic masses of
Rapid Thermophilic Digestion Technology
Rapid Thermophilic Digestion Technology Biomax Technologies Pte Ltd Mr Sim Eng Tong, CEO Block 4 Kaki Bukit Avenue 1, #05-07/08, Singapore 417939 Phone: + 65 6274 8606 Fax: + 65 6274 8607 Website: www.biomaxtech.com
Comparison of natural radioactivity removal methods for drinking water supplies: A review
Comparison of natural radioactivity removal methods for drinking water supplies: A review E. Esmeray, M. E. Aydin Selcuk University Environmental Engineering Department, Konya Turkey e-mail: [email protected]
Bioremediation of Petroleum Contamination. Augustine Ifelebuegu GE413
Bioremediation of Petroleum Contamination Augustine Ifelebuegu GE413 Bioremediation Bioremediation is the use of living microorganisms to degrade environmental contaminants in the soil and groundwater
Injection of Fentons Reagent In-Situ Case studies. Introduction. Introduction. Background - Principles
Injection of Fentons Reagent In-Situ Case studies Introduction Höstmöte 2004 Linköping 27. Oktober 2004 The oxidant, known as Fenton s reagent, destroys a variety of industrial wastes and generates innocuous
Determining the Quantity of Iron in a Vitamin Tablet. Evaluation copy
Determining the Quantity of Iron in a Vitamin Tablet Computer 34 As biochemical research becomes more sophisticated, we are learning more about the role of metallic elements in the human body. For example,
Application of ICP-MS as a Tool for Environmental Monitoring. Bill Spence Environmental Market Specialist
Application of ICP-MS as a Tool for Environmental Monitoring Bill Spence Environmental Market Specialist Introduction Knowledge of the concentration of metallic species in the environment has been important
7. 1.00 atm = 760 torr = 760 mm Hg = 101.325 kpa = 14.70 psi. = 0.446 atm. = 0.993 atm. = 107 kpa 760 torr 1 atm 760 mm Hg = 790.
CHATER 3. The atmosphere is a homogeneous mixture (a solution) of gases.. Solids and liquids have essentially fixed volumes and are not able to be compressed easily. have volumes that depend on their conditions,
EDEXCEL INTERNATIONAL GCSE CHEMISTRY EDEXCEL CERTIFICATE IN CHEMISTRY ANSWERS SECTION E
EDEXCEL INTERNATIONAL GCSE CHEMISTRY EDEXCEL CERTIFICATE IN CHEMISTRY ANSWERS SECTION E (To save endless repetition, wherever they are included, comments are intended for homeschooling parents who may
Estimation of Alcohol Content in Wine by Dichromate Oxidation followed by Redox Titration
Sirromet Wines Pty Ltd 850-938 Mount Cotton Rd Mount Cotton Queensland Australia 4165 www.sirromet.com Courtesy of Jessica Ferguson Assistant Winemaker & Chemist Downloaded from seniorchem.com/eei.html
This experiment involves the separation and identification of ions using
Chemistry 112: Reactions Involving Complex Ions Page 27 COMPLEX IONS AND AMPHOTERISM This experiment involves the separation and identification of ions using two important reaction types: (i) the formation
SYNTHESIS AND ANALYSIS OF A COORDINATION COMPOUND OF COPPER
Chemistry 111 Lab: Synthesis of a Copper Complex Page H-1 SYNTHESIS AND ANALYSIS OF A COORDINATION COMPOUND OF COPPER In this experiment you will synthesize a compound by adding NH 3 to a concentrated
Oxivir Tb and Accelerated Hydrogen Peroxide (AHP) Frequently Asked Questions
Oxivir Tb and Accelerated Hydrogen Peroxide (AHP) Frequently Asked Questions What is Accelerated Hydrogen Peroxide (AHP)? AHP is a patented synergistic blend of commonly used, safe ingredients that when
Understanding the. Soil Test Report. Client and Sample Identification
Understanding the Soil Test Report Page 1 of 7 Crops absorb the nutrients required from soil in order to grow, so ensuring that your soil is meeting the crops needs is critical. Having the proper level
The First Step in Effluent Treatment
ADVANCED OXIDATION PILOT PLANTS FOR WASTEWATER & GAS TREATMENT The First Step in Effluent Treatment OZONO ELETTRONICA INTERNAZIONALE S.R.L. has developed and tested a new advanced oxidation pilot plant,
AN EXPERIMENT IN ALCHEMY: COPPER TO SILVER TO GOLD 2005, 2000, 1996 by David A. Katz. All rights reserved
AN EXPERIMENT IN ALCHEMY: COPPER TO SILVER TO GOLD 2005, 2000, 1996 by David A. Katz. All rights reserved INTRODUCTION One of the goals of the ancient alchemists was to convert base metals into gold. Although
Chemistry Post-Enrolment Worksheet
Name: Chemistry Post-Enrolment Worksheet The purpose of this worksheet is to get you to recap some of the fundamental concepts that you studied at GCSE and introduce some of the concepts that will be part
Costs of air pollution from European industrial facilities 2008 2012 an updated assessment
Costs of air pollution from European industrial facilities 2008 2012 an updated assessment Summary In 2012, air pollution from European industrial facilities cost at least EUR 59 billion (and up to EUR
Ecological Aspects of Oil Shale Processing
Abstract Ecological Aspects of Oil Shale Processing Y. Zhirjakov, Institute of Oil Shale Research Tallinn Technical University Tallinn, Estonia 26 th Oil Shale Symposium Oil shale belongs to lean and environmentally
