Release 4.7 (27/05/15)

Transcription

1 FIA F Parts Classification Release.7 (27/0/1)

2

3 It is reminded that FIA article 27 article 2.7 states: 2.7 Modifications to car design General The complete car is divided into three types of part. Type 1: These parts must be supplied by the manufacturer and used exactly as supplied. Repairs may be carried out only by the manufacturer. Type 2: These parts are Type 1 parts with specific restrictions. Only the modifications indicated in the homologation may be carried out. Repairs are allowed only in the range described in the homologation. Type 3: These parts are unrestricted, provided that they are used as designed by the manufacturer and do not fulfil any additional function. The adding of colour or thin adhesive film up to a thickness of 0. mm is not considered as a modification, provided that the colour or film fulfils only an optical function Standard mounting parts Standard mounting parts, such as screws, nuts, bolts, washers and lock washers, are considered as Type 3 parts unless specifically mentioned in the homologation. They may be replaced with equivalent or superior standard parts. The thread type, size, length and pitch must remain the same. The use of locking wire is permitted. Any type of standard mounting part which has an influence on the car set-up is considered as a Type 1 part unless specifically mentioned in the homologation. Only Type 3 washers may be removed. Washers may be added only for facilitating and improving mechanical installation. They may influence the set-up of the car only when specifically mentioned in the homologation Protections Heat protections, mechanical protections (such as abrasion protection or tape) and protections for driver comfort may be added, provided that their sole function is the protection of the relevant element Bodywork The modification of bodywork parts and bodywork supports is allowed only to ensure proper installation despite manufacturing tolerances Quick couplings The use of quick couplings for brake, clutch and fuel lines is allowed, provided that FIAapproved dry couplings are used.

4 COD.01-A - CHASSIS

5 01A - CHASSIS Item Part Number Descrizione Description Telaio Monocoque x Poggiatesta Headrest x Musetto Nosebox x Rollbar Rollhoop x Prigioniero Stud x Boccola Bush x Anello cavo ritenzione Tether fitting x Pin Pin x Prigioniero Stud x Linguetta Leader x Specchietto Sx Lh mirror x Specchietto dx Rh mirror x Spina Dowel pin x Ghiera Nose connection ring nut x Boccola attacco motore Chassis bush x Prigioniero Stud x Squadretta rollbar Rollbar mounting x Pin posteriore poggiatesta Headrest pin x 19 UNI7380-M8X20 Vite TB BH bolt x 20 UNI7380-M8X30 Vite TB BH Bolt x 21 UNI931-M10X30 Vite TC M10x1,2x30 cl12,9 CH Bolt M10x1,2x30 x 22 UNI931-M6X16 Vite TC CH Bolt x 23 UNI693-6 Rondella Washer x 2 UNI880B-8 Rondella ondulata Crinckle Washer x 2 UNI880B-10 Rondella ondulata Crinckle Washer x Puntalino muso Front nose x # It is allowed to shorten or increase the height of the mirror stem # It is allowed to shorten or increase the height of the mirror stem #19 UNI7380-M8X20 Type and class must be respected #20 UNI7380-M8X30 Type and class must be respected #2 UNI880B-10 It is allowed to replace nose tip according to Tatuus procedure.

6 8 1 COD.01-B - CHASSIS

7 01B - CHASSIS Item Part Number Descrizione Description Finestra serbatoio Bulkhead panel x Chiusura posteriore serbatoio Fuel tank hatch cover x Staffa carrozzeria Sidepods mounting x Prigioniero Stud x UNI7380-MX12 Vite TB BH Bolt x 6 UNI931-M6X16 Vite TC CH Bolt x 7 UNI693-6 Rondella Washer x 8 UNI880B- Rondella ondulata Crinckle Washer x

8 6 3 COD.01-C - COCKPIT

9 01C - COCKPIT Item Part Number Descrizione Description Sedile estraibile Extractable seat x Parabrezza Wind screen x Centraggio Pin x Kit Cinture sicurezza Safety harnesses x Attacco cinture superiori Shoulder belt mount x Prigioniero Stud x 7 UNI7380-M8X2 Vite TB BH Bolt x 8 UNI931-M6X2 Vite TC CH Bolt x 9 UNI692-8 Rondella Washer x # It is allowed a cutout for lower seatbelt strap installation (offset 2mm of the original design) # Windscreen may be removed #7 UNI7380-M8X2 Type and class must be respected #8 UNI931-M6X2 Type and class must be respected

10 3 COD.02-A - WOODEN SKID

11 02A - WOODEN SKID Item Part Number Descrizione Description Fondo in legno Wooden plank x Slitta in legno Skid block x 3 UNI933-TX-M6X20 Vite TS Torx CSH Torx Bolt x UNI933-TX-M6X2 Vite TS Torx CSH Torx Bolt x

12 COD.02-B - FLOOR

13 02B - FLOOR Item Part Number Descrizione Description Semi-fondo SX Lh Underfloor x Semi-fondo DX RH underfloor x Semi-prua inferiore Bottom Bib x Pancia sinistra Lh sidepod x Pancia destra Rh sidepod x Semi-prua superiore Top bib x Convogliatore DX Rh radiator duct x Shadow sx telaio LH chassis shadow x Shadow telaio dx Rh chassis shadow x Convogliatore SX Lh radiator duct x Tirante Floor stay x Tirante Floor stay x Staffa carrozzeria Bodywork bracket x Staffa Underfloor stay x Tirante cambio fondo Sx Gearbox floor stay x 16 UNI931-M3X8 Vite TC CH Bolt x 17 UNI933-TX-M6X16 Vite TS Torx CSH Torx Bolt x 18 UNI933-TX-M6X10 Vite TS Torx CSH Torx Bolt x 19 UNI933-TX-MX16 Vite TS torx CSH Torx Bolt x 20 UNI933-TX-MX12 Vite TS Torx CSH Torx Bolt x 21 UNI7380-TX-MX12 Vite TB Torx BH Torx Bolt x 22 DIN6927-M6 Dado flangiato autobloccante Prevailing torque Nut x 23 DIN6927-M Dado flangiato autobloccante Prevailing torque Nut x 2 UNI773-M3 Dado autobloccante Prevailing torque Nut x 2 E Boccola Antivibrante M6 Bush M6 x # Bodywork can be repaired provided that a maximum of repairing patches can be enclosed in a 300x300mm each. # Bodywork can be repaired provided that a maximum of repairing patches can be enclosed in a 300x300mm each. # Bodywork can be repaired provided that the damaged surface can be enclosed in a 100x100mm square area. # Bodywork can be repaired provided that the damaged surface can be enclosed in a 100x100mm square area. # Bodywork can be repaired provided that the damaged surface can be enclosed in a 300x300mm square area. # Bodywork can be repaired provided that the damaged surface can be enclosed in a 300x300mm square area. # Blanking and stoneguard are allowed minimum 10mm behind the air duct inlet. Rubber sealing can be added. # Blanking and stoneguard are allowed minimum 10mm behind the air duct inlet. Rubber sealing can be added.

14 6 COD.03 - BODYWORK

15 03 - BODYWORK Item Part Number Descrizione Description Cofanetto anteriore Front cover x Labbro pancia SX Lh sidepod lip x Labbro pancia dx Rh sidepod lip x Cofano motore Engine cover x 27S32F Perno ¼ di giro Quarter turn stud x 6 UNI933-TX-MX16 Vite TS torx CSH Torx Bolt x # Bodywork can be repaired provided that the damaged surface can be enclosed in a 300x300mm square area. # Bodywork can be repaired provided that the damaged surface can be enclosed in a 100x100mm square area. # Bodywork can be repaired provided that the damaged surface can be enclosed in a 100x100mm square area. # Bodywork can be repaired provided that a maximum of repairing patches can be enclosed in a 300x300mm each.

16 COD.0-A - FRONT WING

17 0A - FRONT WING Item Part Number Descrizione Description Ala anteriore completa Front wing assy Ala anteriore Front wing x Pilone ala Wing pillar x Regolazione ala anteriore ( ) Front wing adjuster ( ) x Boccola Adjustement bush x Nolder Sx Lh Gurney x Nolder Dx Rh Gurney x Bandella anteriore Sx Lh front endplate x Bandella anteriore Dx Rh front endplate x 9 UNI931-M6X Vite TC CH Bolt x 10 UNI933-M6X2 Vite TS CSH Bolt x 11 UNI7380-MX10 Vite TB BH Bolt x 12 AST-06 K-Nut K-Nut x 13 UNI773-M Dado autobloccante Prevailing torque Nut x 1 UNI692-M Rondella Washer x 1 UNI931-M6X0 Vite TC CH Bolt x Regolazione ala anteriore (3 ) Front wing adjuster (3 ) x Regolazione ala anteriore (7 ) Front wing adjuster (7 ) x #3 # #18 / 03 / 032 Optional item #3 #17 #18 # Gurney may be removed # Gurney may be removed #9 UNI931-M6X Bolt length must be between 0mm and mm #1 UNI931-M6X0 Bolt length must be between 0mm and mm

18 COD.0-B - REAR WING

19 0B - REAR WING Item Part Number Descrizione Description Ala posteriore completa Rear wing assy Ala superiore Top main wing x Ala inferiore Beam wing x Crashbox posteriore Rear impact structure x Cavo di traino completo Tow cable x Bandella post. Sx Lh rear enplate x Bandella post. dx Rh rear enplate x Palo ala post Sx Lh rear wing mounting x Palo ala post. Dx Rh rear wing mounting x Bandella regolazione Sx Lh adjustment enplate x Bandella regolazione Dx Rh adjustment enplate x Gancio sollevamento Lift hook x Boccola Bush x 13 UNI7380-M6X20 Vite TB BH Bolt x 1 UNI7380-MX12 Vite TB BH Bolt x 1 UNI7380-MX16 Vite TB BH Bolt x 16 UNI931-M6X20 Vite TC CH Bolt x 17 UNI931-M8X2 Vite TC CH Bolt x 18 UNI931-M6X2 Vite TC CH Bolt x 19 UNI933-MX12 Vite TS CSH Bolt x 20 UNI7380-M8X3 Vite TB BH Bolt x 21 UNI933-M8X20 Vite TS CSH Bolt x 22 AST-0 K-Nut K-Nut x 23 DIN6927-M6 Dado flangiato autobloccante Prevailing torque Nut x 2 DIN6927-M8 Dado flangiato autobloccante Prevailing torque Nut x 2 UNI693-6 Rondella Washer x 26 UNI692-8 Rondella Washer x 27 UNI693- Rondella Washer x 28 UNI880B-8 Rondella ondulata Crinckle Washer x 29 RZS6 Rondella zigrinata Safety washer x #17 UNI931-M8X2 Type and class must be respected #21 UNI933-M8X20 Type and class must be respected

20 COD.0-A - FRONT WISHBONE Right Left

21 0A - FRONT WISHBONE Item Part Number Descrizione Description Attacco sospensione completo Wishbone bracket assy x Attacco sospensione completo Wishbone bracket assy x Braccio anteriore inferiore dx completo Rh front lower wishbone assy Braccio anteriore inferiore sx completo Lh front lower whisbone assy Braccio anteriore inferiore sx Lh front lower whisbone x Braccio anteriore inferiore dx Rh front lower wishbone x.2 UNIBALL-ABWT8 Snodo sferico Spherical bearing x.3 J2X1,2V Circlip Circlip x Braccio anteriore superiore Front top wishbone x Push rod anteriore completo Front push rod assy Cavo di ritenzione Wheel tether x Rondella speciale /16" Sp.2 Special Flat Washer /16" Th.2 x 9 AN36-/16X2 Dado autobloccante Self-locking Nut x 10 AN-11A Vite NAS NAS bolt x 11 UNI931-M8X20 Vite TC CH Bolt x

22 COD.0-B - FRONT PUSH-ROD 1 2 3

23 0B - FRONT PUSHROD Item Part Number Descrizione Description Puntone anteriore Front push rod x Registro Puntone Push rod adjuster x 3 RE-3/8L Testa a snodo Rod end x Dado speciale M1X1,2 Special Nut M1x1,2 x ANSIB /8X2 Dado esagonale Hex Nut x

24 COD.06-A - FRONT ROCKERS LH 12RH

25 06A - FRONT ROCKERS Item Part Number Descrizione Description Staffa ammortizzatore Damper mounting x Boccola Bush x Prigioniero Stud x Boccola Bush x A Molla 600 lb/in Spring 600 lb/in x C Molla 800 lb/in Spring 800 lb/in x E Molla 1000 lb/in Spring 1000 lb/in x Supporto FARB FARB bracket x Rocker anteriore completo Front rocker assy FARB ø 11. FARB ø 11. x FARB ø 13. FARB ø 13. x Link FARB Link FARB x Rebound stop SX Rebound stop LH x Rebound stop DX Rebound stop RH x Ammortizzatore anteriore Front damper x 1 RE-8M Testa a snodo Rod end x 1 RE-8ML Testa a snodo Rod end x 16 PAF2021P10 Boccola Flangiata DU Self-lubricating flanged bush x 17 UNI739-M8X2 Vite TE HH Bolt x 18 UNI89-M8L Dado esagonale basso Thin Hex Nut x 19 UNI89-M8 Dado esagonale basso Thin Hex Nut x 20 AN-11A Vite NAS NAS bolt x 21 AN-12A Vite NAS NAS bolt x 22 AN-13A Vite NAS NAS bolt x 23 UNI931-M6x12 Vite TC CH Bolt x 2 DIN980-M6 Dado autobloccante Prevailing torque Nut x 2 AN36-1/X28 Dado autobloccante Self-locking Nut x 26 AST-1/ K-Nut K-Nut x 27 AST-06 K-Nut K-Nut x 28 AN960-1/ Rondella Washer x Ghiera molla Plateform x # A/C/E Optional item # # Optional item, may be removed / disconnected # Optional item, may be removed / disconnected # Optional item, may be removed / disconnected

26 COD.06-B - FRONT ROCKER

27 06B - FRONT ROCKERS Item Part Number Descrizione Description Rondella speciale Button washer x Perno Rocker ant Front rocker pivot x Registro rocker ant. Front rocker adjuster x AS22 Controralla Thrust bearing washer x AXK22 Cuscinetto reggispinta Thrust bearing x Perno prigioniero rocker ant. Front rocker stud x 7 HK220 Cuscinetto a rullini Drawn cup needle roller bearing x 8 UNI933-M6X1 Vite TS CSH Bolt x 9 DIN6927-M8ER Dado flangiato autobloccante Prevailing torque Nut x Rocker anteriore Front rocker x Lamiera arresto rocker Rebound stop flange x 10.3 UNI933-MX8 Vite TS CSH Bolt x

28 COD.07-A - FRONT UPRIGHT

29 07A - FRONT UPRIGHT Item Part Number Descrizione Description Portamozzo completo Upright assy Attacco puntone Push rod bracket x Ackerman Ackerman x Ruota fonica Trigger wheel x Anello cavo ritenzione Tether fitting x Cerchio 8"x13" Wheel 8"x13" x Supporto sensore velocità Sensor bracket x Disco Freno Brake disc x Sensore Velocità Speed sensor x Dado ruota completo DX RH wheel nut assy RH Campanella dado ruota DX RH wheel nut bell x Dado ruota DX RH wheel nut x 10.3 UNI Rondella Washer x 10. DIN71E21 Circlip Circlip x Boccola Bush x Boccola ABWT 8 Bush x Clip sicurezza Safety spring x B Spessore camber 2 mm Camber Shim 2mm x A Spessore camber 1mm Camber Shim 1mm x 16 XA6L612 Pinza freno RHT Brake caliper RHT x 17 XA6L611 Pinza freno LHT Brake caliper LHT x 18 UNI931-M10X0 Vite TC M10x1,2x0 cl.12.9 CH Bolt M10x1,2x0 class12.9 x 19 UNI7380-MX Vite TB BH Bolt x 20 UNI737-M6X60 Vite TE cl 10.9 HE Bolt class 10.9 x 21 UNI737-M6X0 Vite TE cl 10.9 HE Bolt class 10.9 x 22 UNI931-M10X30 Vite TC CH Bolt x 23 AN-11A Vite NAS NAS bolt x 2 AN6-22A Vite NAS NAS bolt x 2 AN960-1/ Rondella Washer x 26 UNI Rondella Washer x Rondella washer x 28 UNI880B-10 Rondella ondulata Crinckle Washer x 29 UNI880B- Rondella ondulata Crinckle Washer x 30 AST-06 K-Nut K-Nut x 31 AST-1/ K-Nut K-Nut x 32 AST-3/8 K-Nut K-Nut x 33 AST-10X1,2 K-Nut K-Nut x 3 UNI89-M8 Dado esagonale basso Thin Hex Nut x 3 FDS162 Pastiglie Freno Brake pads x Spessore camber 6mm Camber shim 6mm x 37 UNI737-M6X6 Vite TE cl 10.9 HE Bolt class 10.9 x 38 UNI737-M6X Vite TE cl 10.9 HE Bolt class 10.9 x 39 UNI7380-MX8 Vite TB BH Bolt x 0 RZS Rondella zigrinata Safety washer x # Minimum thickness 17.0mm # B Number and stack of shim is free, item may be removed # A Number and stack of shim is free, item may be removed #18 UNI931-M10X0 Type and class must be respected #20 UNI737-M6X60 Bolt length must be between 60mm and 70mm #21 UNI737-M6X0 Bolt length must be between 0mm and 0mm # Number and stack of shim is free, item may be removed

30 1 COD.07-B- FRONT UPRIGHT

31 07B - FRONT UPRIGHT Item Part Number Descrizione Description Blocco portamozzo anteriore Front upright mount x Portamozzo Upright x Perno ruota anteriore Front wheel axle x Pin trascinatore Wheel Drive pin x Prigioniero Stud x Prigioniero Stud x 7 BAR008VK108 Cuscinetto ruota Wheel bearing x 8 UNI931-M12X30 Vite TC CH Bolt x 9 DIN71A27 Circlip Circlip x 10 DIN6927-M8ER Dado flangiato autobloccante Prevailing torque Nut x 11 RZS12 Rondella zigrinata Safety washer x Boccola Bush x

32 COD.07-C - CALIPER 1 3 2

33 07C - CALIPER Item Part Number Descrizione Description A12969 Pistoncino pinza (1x) Caliper piston (1of) x Perno Caliper pin x kit guarnizioni (8x) Caliper seal kit x 0227 Molla a R R-clip x Vite spurgo (1x) Caliper bleed Bolt (1of) x # May be replaced by Brembo ref # 0227 Locking wire may be added / replace the clip

34 COD.09-A - STEERING ASSY

35 09A - STEERING ASSY Item Part Number Descrizione Description Boccola terminale cremagliera Rack-end bush x Dado speciale Special Nut x Giunto sfera Ball end joint x Sede snodo sterzo Ball joint seat x Giunto sferico Spherical bearing x Distanziale volante Steering wheel spacer x C Prigioniero M x 1 Stud M x 1 x B Prigioniero M x 38 Stud M x 38 x D Prigioniero M x 6 Stud M x 6 x Fine corsa cremagliera Rack stop x Giunto sferico Spherical bearing x Scatola guida completa Steering rack assy Assieme piantone Steering column assy Tirante sterzo Track rod x Supporto piantone Steering column mounting x Supporto piantone Steering column mounting x Link potenziometro sterzo Steering pot link x Supporto potenzionemtro sterzo Steering pot bracket x Potenziometro lineare Linear potentiometer x Supporto piantone Steering column mounting x Boccola Bush x Distanziale Spacer x Rondella speciale Special washer x 22 F Staccavolante Steering wheel quick release x 23 VV213001D Volante completo Steering wheel x 2 UNI7380-MX8 Vite TB BH Bolt x 2 UNI931-MX1 Vite TC CH Bolt x 26 UNI931-M6X18 Vite TC CH Bolt x 27 UNI931-M6X16 Vite TC CH Bolt x 28 UNI77-M Dado autobloccante Prevailing torque Nut x 29 AN-13A Vite NAS NAS bolt x 30 UNI739-M6X16 Vite TE HH Bolt x 31 AN36-1/X28 Dado autobloccante Self-locking Nut x 32 UNI89-M Dado esagonale basso Thin Hex Nut x 33 AST-06 K-Nut K-Nut x 3 UNI89-M8 Dado esagonale basso Thin Hex Nut x 3 UNI880B-6 Rondella ondulata Crinckle Washer x 36 RZS Rondella zigrinata Safety washer x 37 RZS6 Rondella zigrinata Safety washer x 38 ORN036 O-Ring O-Ring x # Optional item, a maximum of three spacer can be stack # C Optional stud to be used without shim # B Optional stud to be used whit 1of shim # D Optional stud to be used whit 2of shim #6

36 3 11 COD.09-B - STEERING RACK

37 09B - STEERING RACK Item Part Number Descrizione Description Boccola Bush x Pastiglia registro Adjuster spacer x Boccola iglodur Iglodur bush x Ghiera Ring nut x Tappo cremagliera Rack adjuster cap x Pignone cremagliera Rack pinion x Corpo scatola guida Steering box housing x Cremagliera Rack x RS1 Cuscinetto Bearing x RS1 Cuscinetto Bearing x 11 ORN22X3 O-Ring O-Ring x 12 UNI931-MX8 Vite TB INOX BH Bolt Stainless Steel x 13 AST-12 K-Nut K-Nut x 1 RZS Rondella zigrinata Safety Washer x

38 6 2 COD.09-C-STEERING COLUMN

39 09C - STEERING COLUMN Item Part Number Descrizione Description Testa millerighe Splined shaft x Controghiera Platform x Ghiera Ring nut x Rondella speciale Special washer x Cartuccia deformabile Steering crashbox x Piantone sterzo Steering column top end x Terminale piantone Steering column bottom end x 8 AN-12A Vite NAS NAS bolt x 9 UNI931-M6X2 Vite TC CH Bolt x 10 AST-1/ K-Nut K-Nut x 11 AST-06 K-Nut K-Nut x 12 ORN123 O-Ring O-Ring x

40 COD.09-D - STEERING WHEEL

41 09D - STEERING WHEEL Item Part Number Descrizione Description VV Supporto palette Levers bracket x 2 VV213010C Distanziale Spacer x 3 VV Paletta gearshift Gearshift paddle x XS196C Molla Coil x

42 COD.10-A REAR WISHBONE Right Left

43 10A - REAR WISHBONE Item Part Number Descrizione Description Braccio posteriore inferiore dx completo Rh rear lower wishbone assy Braccio posteriore inferiore sx completo Lh rear lower wishbone assy Braccio posteriore inferiore sx Lh rear lower wishbone x Braccio posteriore inferiore dx rh rear lower wishbone x 2.2 UNIBALL-ABWT8 Snodo sferico Spherical bearing x 2.3 J2X1,2V Circlip Circlip x Braccio superiore post. Rear upper wishbone x Push rod posteriore completo Rear push rod assy Tirante convergenza posteriore completo Rear tie rod assy Attacco sospensione post. completo Rear wishbone bracket assy x Cavo di ritenzione Wheel tether x Blocchetto sospensione post. Sx x Rear Lh suspension bracket assy completo Blocchetto sospensione post. Dx completo Rear Rh suspension bracket assy x Special Flat Washer /16" Sp.2 Special Flat Washer /16" Sp.2 x 11 AN-11A Vite NAS NAS bolt x 12 UNI931-M8X2 Vite TC CH Bolt x 13 UNI9327-M8X20 Vite TC CH Bolt x 1 AN36-/16X2 Dado autobloccante Self-locking Nut x 1 AN960-/16 Rondella Washer x

44 COD.10-B - REAR PUSH ROD 1 2 3

45 10B - REAR PUSHROD Item Part Number Descrizione Description Puntone posteriore Rear push rod x Registro Puntone Push rod adjuster x 3 RE-3/8L Testa a snodo Rod end x Dado speciale M1X1,2 Special Nut M1x1,2 x ANSIB /8X2 Dado esagonale Hex Nut x

46 COD.10 - C - REAR TIE ROD 3 2 1

47 10C - REAR TIE ROD Item Part Number Descrizione Description Tirante convergenza posteriore Rear tie rod x Registro Puntone Push rod adjuster x 3 RE-3/8L Testa a snodo Rod end x Dado speciale M1X1,2 Special Nut M1x1,2 x ANSIB /8X2 Dado esagonale Hex Nut x

48 COD.11-A - REAR UPRIGHT

49 11A - REAR UPRIGHT Item Part Number Descrizione Description Portamozzo posteriore completo Rear upright assy Ackerman Ackerman x Spessore camber 2mm Camber Shim 2mm x Spessore camber 1mm Camber Shim 1mm x Cerchio 10"x13" Wheel 10"x13" x Dado ruota completo DX RH wheel nut assy RH Campanella dado ruota DX RH wheel nut bell x Dado ruota DX RH wheel nut x 6.3 UNI Rondella Washer x 6. DIN71E21 Circlip Circlip x Anello cavo ritenzione Tether fitting x Disco Freno Brake disc x 9 XA6L611 Pinza freno LHT Brake caliper LHT x 10 XA6L612 Pinza freno RHT Brake caliper RHT x Clip sicurezza Safety lock clip x Boccola ABWT 8 Bush x Boccola ABWT Bush x 1 FDS162 Pastiglie Freno Brake pads x Vite speciale M8x1x60 Special bolt M8x1x60 x Vite speciale M8x1x6 Special bolt M8x1x6 x 17 AN6-22A Vite NAS NAS bolt x 18 AN-13A Vite NAS NAS bolt x 19 UNI931-M10X0 Vite TC M10x1,2x0 cl.12.9 CH Bolt M10x1,2x0 class12.9 x 20 UNI931-M10X30 Vite TC CH Bolt x 21 AST-/16 K-Nut K-Nut x 22 AST-3/8 K-Nut K-Nut x 23 AST-10X1,2 K-Nut M10X1,2 K-Nut M10X1,2 x 2 AST-08X1 K-Nut M8X1.0 K-Nut M8X1.0 x 2 AN960-/16 Rondella Washer x 26 UNI Rondella Washer x Rondella Washer x 28 UNI880B-10 Rondella ondulata Crinckle Washer x Spessore camber 6mm Camber shim 6mm x # Number and stack of shim is free, item may be removed # Number and stack of shim is free, item may be removed # Minimum thickness 17.0mm # Optional installation of item #1 or #16 # Optional installation of item #1 or #16 #19 UNI931-M10X0 Type and class must be respected # Number and stack of shim is free, item may be removed

50 COD.11-B - REAR UPRIGHT

51 11B - REAR UPRIGHT Item Part Number Descrizione Description Blocco portamozzo posteriore Rear upright mount x Perno ruota posteriore Rear wheel axle x Tampone semiasse Driveshaft plunger x Prigioniero Stud x Portamozzo Upright x Pin trascinatore Wheel Drive pin x Prigioniero Stud x 8 BAR008VK108 Cuscinetto ruota Wheel bearing x 9 DIN71A27 Circlip Circlip x 10 UNI931-M12X30 Vite TC CH Bolt x 11 DIN6927-M8ER Dado flangiato autobloccante Prevailing torque Nut x 12 RZS12 Rondella zigrinata Safety washer x

52 COD.12 - HALFSHAFT

53 12 - HALFSHAFT Item Part Number Descrizione Description Semiasse Completo Halfshaft Assy 1 F00893 Semiasse Halfshaft x Flangia portacuffia Boot carrier x Cuffia lato ruota Wheel side boot x Cuffia lato cambio Gear side boot x F902 Tripode Tripode x 6 F9021 Pistone semiasse Halfshaft plunger x 7 F Tappo semiasse Halfshaft cap x 8 F9029 Circlip Circlip x Circlip Circlip x 10 MLTCP Fascetta Clamp x Molla Spring x 12 ORN8X3 O-Ring O-Ring x 13 UNI933-MX12 Vite TS CSH Bolt x 1 F Sede tripode Flange x 1 F Anello Ring x

54 COD.13-A - REAR ROCKERS

55 13A - REAR ROCKERS Item Part Number Descrizione Description Boccola Bush x Boccola DU Self-lubricating Bush x A MOLLA 600 Spring x C MOLLA 800 Spring x E MOLLA 1000 Spring x Rocker posteriore completo Rear rocker assy RARB ø 8 RARB ø 8 x RARB ø 10. RARB ø 10. x Supporto RARB RARB Bracket x Link RARB Link RARB x Supporto ammortizzatore Damper bracket x Rebound stop Rebound stop x Ammortizzatore posteriore Rear damper x 12 RE-8ML Testa a snodo Rod end x 13 RE-8M Testa a snodo Rod end x 1 AN-12A Vite NAS NAS bolt x 1 AN-13A Vite NAS NAS bolt x 16 AN-12A Vite NAS NAS bolt x 17 UNI739-M8X0 Vite TE HH Bolt x 18 UNI931-M6X12 Vite TC CH Bolt x 19 UNI931-M8X20 Vite TC CH Bolt x 20 AN36-/16X2 Dado autobloccante Self-locking Nut x 21 AN36-1/X28 Dado autobloccante Self-locking Nut x 22 DIN980-M6 Dado autobloccante Prevailing torque Nut x 23 UNI89-M8 Dado esagonale basso Thin Hex Nut x 2 AN960-1/ Rondella Washer x 2 AN960-/16 Rondella Washer x 26 UNI89-M8L Dado esagonale basso Thin Hex Nut x Ghiera molla Plateform x # A/C/E Optional item #3 # Optional item, may be removed / disconnected # Optional item, may be removed / disconnected # Optional item, may be removed / disconnected

56 COD. 13-B - REAR ROCKER

57 13B - REAR ROCKER Item Part Number Descrizione Description Rocker posteriore Rocker posteriore x Boccola ABWT Bush x Perno Rocker post. Rear rocker pivot x Perno prigioniero rocker Rear rocker stud x Ghiera rocker Rocker ring x AS307 Controralla Thrust Bearing washer x 6 AXK307 Cuscinetto reggispinta Thrust bearing x 7 HK3012 Cuscinetto a rullini Drawn cup needle roller bearing x 8 DIN6927-M8ER Dado flangiato autobloccante Prevailing torque Nut x 9 RZS1 Rondella zigrinata Safety washer x

58 COD.1 - PEDALS

59 1 - PEDALS Item Part Number Descrizione Description Cavo regolazione frenata Brake bias cable x Distanziale Stay x Piastra base pedaliera Pedals mount base x Perno acceleratore Throttle pedal pivot x Guida molla torsionale Spring carrier x Perno pedali Pedals pivot x Piastra pedale freno Brake pedal pad x Pedale acceleratore Throttle pedal x Piastra pedale acceleratore Throttle pedal pad x Arresto molla Spring holder x Pedale freno Brake pedal x Molla torsionale Torsional spring x Potenziometro acceleratore Throttle potentiometer x Supporto puntalino Rod base x Rasamento potenziometro Potentiometer shim x Piastra ripartitore Bias knob plate x Pedale frizione Clutch pedal x Piastra pedale frizione Clutch pedal pad x Molla Spring x Manopola ripartitore Brake bias knob x Sfera Ball x Fermo pedale Pedal stop x 23 UNI6873- Spina elastica Slotted spring pin x 2 CM6-M6 Testa a snodo Rod end x 2 UNI931-M6X2 Vite TC CH Bolt x 26 UNI931-MX10 Vite TC CH Bolt x 27 UNI7380-M6X2 Vite TB BH Bolt x 28 UNI933-MX12 Vite TS CSH Bolt x 29 UNI7380-MX6 Vite TB BH Bolt x 30 UNI7380-M6X20 Vite TB BH Bolt x 31 UNI7380-M8X3 Vite TB BH Bolt x 32 UNI923-MX2 Grano Dowel x 33 UNI929-M3X3 Grano Dowel x 3 UNI933-M8X100 Vite TS CSH Bolt x 3 UNI89-M Dado esagonale basso Thin Hex Nut x 36 AST-06 K-Nut K-Nut x 37 UNI89-M8 Dado esagonale basso Thin Hex Nut x 38 UNI933-MX12 Vite TS Bolt x 39 UNI692- Rondella Washer x 0 UNI Rondella Washer x 1 UNI692-8 Rondella Washer x 2 UNI880B-8 Rondella ondulata Crinckle Washer x 3 UNI880B-6 Rondella ondulata Crinckle Washer x # It is allowed to stack up to two rod and cut one for adjustment # It is allowed to add braces and/or extension to the pedal pad (no modification to standard part) # It is allowed to add braces and/or extension to the pedal pad (no modification to standard part) # It is allowed to add braces and/or extension to the pedal pad (no modification to standard part) # It is allowed cut the rod for adjustment

60 COD.16-A - PUMP ASSEMBLY

61 16A - MASTER CYLINDERS Item Part Number Descrizione Description Forcella ripartitore freni Brake bias clevis x Boccola Bush x Distanziale pompe Master cylinder spacer x Puntalino 73 mm Master cylinder rod 73 mm x Adattatore Clutch pedal rod x Prigioniero Stud x Finecorsa Frizione Clutch stop x 8 CP AP master cylinder /8" AP master cylinder /8" x 9 CP AP master cylinder 0.7" AP master cylinder 0.7" x 10 CP Serbatoio SMALL AP AP SMALL reservoir x 11 CP Serbatoio MEDIUM AP AP MEDIUM reservoir x 12 UNI89-M8 Dado esagonale basso Thin Hex Nut x 13 DIN6927-M8 Dado flangiato autobloccante Prevailing torque Nut x 1 UNI89-M6 Dado esagonale basso Thin Hex Nut x Puntalino 200 mm Master cylinder rod 200mm x # Maximum two rods can be stacked, for long rod replace with # It is allowed to add and stack one of or one of #8 CP May be replaced by CP # This item can replace

62 COD.16-B BRAKES-CLUTCH LINES

63 16B - BRAKE-CLUTCH LINES Item Part Number Descrizione Description Adattatore sensore pressione Pressure sensor adapter x Sensore pressione (100bar) Pressure sensor (100bar) x Tubo frizione Clutch Hose x Tubo freno posteriore Rear brake hose x Tubo freno post 3 vie Rear 3-ways brake hose x Tubo freno anteriore Front brake hose x Rondella Washer x Vite banjo Banjo bolt x Vite banjo Banjo bolt x # Dry brake can be added # Dry brake can be added # Dry brake can be added # Dry brake can be added

64 COD.17 - EXSTINGUISHER

65 17 - FIRE EXTINGUISHER Item Part Number Descrizione Description Ugelli vano motore Engine bay extingusher nozzle x 2 CEFAL3 Estintore Extinguisher bottle x 3 CD398 Centralina estintore Extinguisher control box x CD00 Supporto Estintore Exitngusher holder x UNI931-M6X1 Vite TC CH Bolt x 6 UNI933-MX12 Vite TS CSH Bolt x 7 UNI931-MX12 Vite TC CH Bolt x 8 DIN6927-M Dado flangiato autobloccante Prevailing torque Nut x 9 UNI693-6 Rondella Washer x 10 ABA Fascetta Aba Clamp x

66 COD.18-B - ELECTRIC SYSTEM

67 Driver panel Radio Steering pos. Rain Light Can aux Gear pot. Cut - off FR speed FL speed Rear brake Front brake Trottle pedal Can aux COD.18-C - ELECTRIC SYSTEM 10 CHASSIS LOOM Beacon Marshall Master switch GND Extinguisher Steering wheel Pit aux ECU GCU Ring.M6 Solenoid ADR DAQ Fuel Gearbox Powerbox GCC LOOM GEARBOX LOOM Fuse EGA GND GCC engine GCU

68 COD.18-D - ELECTRIC SYSTEM 27 OMP EXTINGUISHER LOOM POWER LOOM

69 CH-1 steer CH-2 P brake F. COD.18-E- ELECTRIC SYSTEM 19 AIM EVO LOOM CH-3 P brake R. Power ECU DAQ Beacon

70 18 - ELECTRIC SYSTEM Item Part Number Descrizione Description Plancia strumenti Switch panel x 2.1 X60E1309 Logger AIMEVO Logger AIM x 2.2 X96SHG010S0 Camera AIMSMARTYCAM AIM video system x 2.3 X1RX12090 Beacon RX AIM Lap trigger RX x Fanale posteriore Rear Light x Distanziale GCC GCC spacer x Supporto fanale Rear light bracket x Staffa elettronica Electronic carrier x Staffa GCC GCC carrier x Blocco GCC GCC holder x Staffa beacon Laptrigger bracket x Impianto vettura Chassis loom x Impianto cambio Gearbox loom x Impianto GCC GCC loom x Marshall switch mk.2 Marshall switch mk.2 x V batteria - MS +12V battery - MS x V MS - alternatore +12V MS - alternator x V alternatore - starter +12V alternator - starter x GND batteria motore GND battery engine x V Fusibile GCC +12V Fuse x Impianto DAQ AIM AIM EVO loom x Antenna GPS AIM AIM GPS antenna x Impianto CAN AIM AIM CAN loom x Impianto LVDS AIM AIM LVDS loom x Impianto dati AIM AIM Com loom x supporto camera camera bracket x Powerbox PSD9 PSD9 Powerbox x Supporto powerbox PSD9 bracket x Impianto estintore OMP OMP extinguisher loom x Staffa batteria Battery holder x supporto connettore scarico dati download loom bracket x 30 ETX1L Batteria standard Standard battery x 31 TYCO-HCR-300-A Master switch Master switch x GCC GCC x ZXT Portafusibile Fusebox x Fusibile 80A Fuse x Spina Anderson Anderson Jack plug x 36 LST668A Staffa di fissaggio Smartycam Smartycam bracket x 37 PUFM1X2MF puffer Silent Block x 38 PUFM1X1MF Puffer Silent Block x 39 PUFM62X1MF Puffer Silent block x 0 E puffer M Silent Block x 1 UNI931-M3X8 Vite TC CH bolt x 2 UNI931-MX2 Vite TC CH bolt x 3 UNI931-MX12 Vite TC CH bolt x UNI931-M6X1 Vite TC CH bolt x UNI931-M6X18 Vite TC CH Bolt x 6 UNI933-MX8 Vite TS CSH Bolt x 7 UNI933-MX22 Vite TS CSH Bolt x 8 UNI933-M6X12 Vite TS CSH Bolt x 9 UNI7380-MX8 Vite TB BH Bolt x 0 UNI7380-MX12 Vite TB Bolt x 1 UNI7380-MX10 Vite TB BH Bolt x 2 UNI7380-MX12 Vite TB BH Bolt x 3 UNI7380-MX16 Vite TB BH Bolt x UNI7380-MX18 Vite TB BH Bolt x UNI7380-MX20 Vite TB BH bolt x 6 UNI7380-M6X10 Vite TB BH bolt x 7 AST-06 Dado Astori M6 Astori Nut M6 x 8 DIN6927-M Dado flangiato autobloccante Prevailing torque Nut x 9 RZS Rondella zigrinata Washer x 60 RZS Rondella zigrinata Safety washer x 61 UNI692-3 Rondella Washer x 62 UNI692- Rondella Washer x 63 UNI692- Rondella Washer x 6 UNI692-6 Rondella Washer x 6 UNI693-6 Rondella larga Large washer x 66 UNI880B- Rondella Ondulata Crinkle Washer x 67 UNI880B- Rondella ondulata Crinkle Washer x # Can be installed on either side of the roll-hoop

71

72 COD.19-A - WATER SYSTEM

73 19A - WATER SYSTEM Item Part Number Descrizione Description Radiatore Water radiator x Tubo uscita motore Engine outlet pipe x Tubo incrocio Crossing pipe x Tubo sfiato Bleed line x Tubo Pipe x Vaso espansione acqua water tank x Tappo vaso espansione Water cap x 8 E9028 Manicotto Silicon hose x 9 E28 Manicotto Silicon hose x 10 SCH28 Manicotto Silicon hose x Fascetta Clamp x Rondella rame Copper washer x Fascetta Clamp x Vite banjo Banjo bolt x P Vite banjo Banjo bolt x Vite banjo Banjo bolt x Tubo elastolan ø8x6 L670 Elastolan hose ø8x6 L670 x

74 COD.19-B - WATER SYSTEM

75 19B - WATER SYSTEM Item Part Number Descrizione Description Radiatore Water radiator x Tubo mandata radiatore Radiator inlet pipe x Tubo ritorno pompa Water pump inlet pipe x SCH28 Manicotto Silicon hose x Fascetta Clamp x 6 E9028 Manicotto Silicon hose x Rondella rame Copper washer x Tappo radiatore Radiator cap x

76 COD.20 - OIL SYSTEM

77 20 - OIL SYSTEM Item Part Number Descrizione Description Tubo aspirazione serbatoio Tank suction hose x Tubo ritorno serbatoio Tank return hose x Flangia serbatoio olio Oil tank flange x AN83312 Raccordo #12 passaparete 90 Male elbow x RL3112-3/8 Raccordo pneumatico Breathing elbow x 6 DIN382-M22X1, Tappo esagono incassato Hexagon socket plug x O-Ring O-Ring x 8 UNI7380-M6X1 Vite TB BH Bolt x 9 AN9212 Dado Nut x 10 CW90112 Rondella Washer x 11 UNI880B-6 Rondella ondulata Crinkle Washer x Raccordo # Femmina 11/16x12 Hose fitting female #12 90 x Tubo elastolan ø12x9 L320 Elastolan hose ø12x9 L320 x

78 COD.21-A - FUEL SYSTEM

79 21A - FUEL SYSTEM Item Part Number Descrizione Description Serbatoio benzina Fuel Cell x Guarnizione Seal x Flangia serbatoio Tank rear flange x Flangia anteriore serbatoio Tank front flange x Tappo benzina Fuel plug x 6 AN9206 Dado 9-16x18 UNF Nut x Valvola Sfiato Vent valve x Filler inferiore serbatoio Lower filler x Filler laterale Side filler x 10 ORV131 O-ring O-ring x 11 AN83706 Racc. Passaparete 9/16x18 male bulkhead x 12 UNI933-M6X1 Vite TS CSH Bolt x 13 UNI7380-M6X16 Vite TB BH Bolt x 1 RR120 Rondella Washer x 1 UNI880B-6 Rondella ondulata Crinkle Washer x Squadretta QR Bracket x Tubo elastolan ø8x6 L290 Elastolan hose ø8x6 L290 x # May be removed

80 COD.21-B - FUEL SYSTEM

81 21B - FUEL SYSTEM Item Part Number Descrizione Description Tubo benzina Fuel Hose x Tubo ritorno Fuel Hose x Tubo mandata Fuel Hose x Staffa sensore Fuel sensor bracket x SPT0836L Raccordo rapido femmina Quick coupling socket x 6 SPT0876L Raccordo rapido maschio Quick connector plug x 7 DIN6927-M8ER Dado flangiato autobloccante Prevailing torque Nut x 8 UNI7380-MX1 Vite TB BH Bolt x 9 UNI7380-M8X18 Vite TB BH Bolt x 10 DIN6927-M Dado flangiato autobloccante Prevailing torque Nut x

82 COD.21-C - FUEL SYSTEM

83 21C - FUEL SYSTEM Item Part Number Descrizione Description Supporto pompa HP Fuel pump carrier x Tubo benzina Fuel Hose x Tubo ritorno Fuel Hose x Cablaggio pompa benzina Tank Loom x Pompa benzina Fuel pump x Protezione pompa Fuel pump stay x Filtro benzina Fuel filter x M1 Adattatore 9/16-M1x1. Adattatore 9/16-M1x1. x 9 18M12M1 Adattatore M12 - M1 Male to male x 10 ORV200 O-ring O-ring x 11 ORV3237 O-ring O-ring x 12 UNI931-MX12 Vite TC Inox CH Bolt Stainless Steel x 13 AST-0 K-Nut K-Nut x 1 AST-0 K-Nut K-Nut x 1 RR120 Rondella Washer x 16 RR1218 Rondella Washer x 17 UNI692- Rondella Washer x 18 UNI692- Rondella Washer x

84 COD.22-A - ENGINE

85 22A - ENGINE Item Part Number Descrizione Description Distanziale motore Engine spacer Tubo spurgo/mandata frizione Clutch bleed/delivery line x 3 ORN123 O-ring O-ring x Flangia Catch-tank Catch-tank flange x Tubo interno campana Bleed pipe x O-Ring O-Ring x 7 AST-10 K-Nut K-Nut x Motorino avviamento Starter Indicatore di livello Level gauge x 10 TAAP389 Attuatore frizione Completo Slave cylinder assy 10.1 TAAP Corpo attuatore frizione Slave cylinder body x 10.2 TAAP Pistone attuatore frizione Slave cylinder piston x 10.3 CP37-9 Release Bearing Cuscinetto x 10. CP379-3 Kit guarnizioni spingidisco Sleave seal kit x 11 RL3112-3/8 Raccordo D12 3/8 Gas Breathing elbow x 12 RL81210 Raccordo 12-8mm Breathing elbow x 13 RL Raccordo 12-3/8 Breathing elbow x Nipplo 3/8 Bleed nipple x 1 CP Vite spurgo 3/8-2UNF Bleed bolt x passaparete P Bulkhead fitting x 17 DIN382-M16X1, Tappo esagono incassato Hexagon socket plug x 18 UNI931-M10X30 Vite TC CH Bolt x 19 UNI931-M10X3 Vite TC CH Bolt x 20 UNI931-M6X2 Vite TC CH Bolt x 21 UNI933-M6X16 Vite TS CSH Bolt x Rondella speciale Special washer x 23 RZS10 Rondella zigrinata Crinkle Washer x 2 UNI880B-6 Rondella ondulata Crinkle Washer x 2 AST-12 K-Nut K-Nut x Tubo elastolan ø12x9 L800 Elastolan hose ø12x9 L800 x Tubo elastolan ø8x6 L80 Elastolan hose ø8x6 L80 x

86 COD.22-B - ENGINE

87 22B - ENGINE Item Part Number Descrizione Description Motore FPT_10FJT Engine unit Carter protezione frizione Flywheel protection Tubo raffreddamento turbina Turbo cooling pipe x Vite banjo Banjo bolt x Vite banjo Banjo bolt x Supporto motore Top engine mounting Frame motore Framework Boccola traversa motore Bush Prigioniero Stud Prigioniero Stud Prigioniero Stud Supporto vaso espansione Water tank bracket _m_1TF_volano Flywheel 1 CY0 Filtro aria Air filter 1 PAS018 Fascetta gommata d18 Clamp 16 CP6002 Frizione completa Clutch assy 17 UNI931-M6X2 Vite TC CH Bolt x 18 RR120 Rondella rame Copper washer 19 RR1622 Rondella rame Copper washer 20 AST-08 K-Nut K-Nut cavo motorino avviamento starter cable 22 UNI692-6 Rondella Washer x 23 UNI692-8 Rondella Washer 2 UNI931-M12x0 Vite TC CH bolt Lamiera paracalore turbina Heat shield x 26 SW-1/ Rondella speciale Special washer x 27 UNI929-M8X20 Grano Stud x 28 AST-06 K-Nut K-Nut x 29 AST-08X1 K-Nut M8x1.0 K-Nut M8x1.0 x

88 COD.22-C - ENGINE FRAME KIT 3 2 1

89 22C - ENGINE FRAME KIT Item Part Number Descrizione Description Rinforzo motore Abarth Frame Abarth Engine x Prigioniero Prigioniero x Rondella Spec. 12,x19x3 Special flat washer x UNI931-M8X2 Vite TC classe 12.9 CH bolt class 12.9 x RZS8 Rondella zigrinata Safety Washer x

90 COD.2-A - GEARBOX

91 2A - GEARBOX Item Part Number Descrizione Description Rocker EGA EGA rocker x Link EGA Link EGA x Terminale filtro olio Suction screen plug x Filtro pescaggio olio f0082 Suction screen fitting f0082 x F Unlocking cable plug Unlocking cable plug x 6 F90232 Suction screen Suction screen x O-Ring 2x3 O-Ring 2x3 x O-Ring O-Ring x 9 DIN382-M18X1, Tappo esagono incassato Hexagon socket plug x Prigioniero Stud x 11 UNI931-M10X30 Vite TC CH Bolt x 12 UNI931-M6X80 Vite TC CH Bolt x 13 UNI931-M6X16 Vite TC CH Bolt x 1 UNI89-M8 Dado esagonale basso Thin Hex Nut x Prigioniero Stud x EGA EGA x f10 circlip f10 circlip x 18 F00812 selector axle selector axle x 19 F selector spacer selector spacer x bearing 6000 bearing x 21 F bearing spacer bearing spacer x M6x0 Chc bolt M6x0 Chc bolt x M6X20 CHc bolt M6X20 CHc bolt x 2 RL1818 Raccordo 1/8" Gas Fitting x Tubo elastolan ø8x6 L670 Elastolan hose ø8x6 L670 x

92 COD.2-C - GEARBOX

93 2C - GEARBOX Item Part Number Descrizione Description D2x7x7 Guarnizione D2x7x7 lip seal x D7 Seeger D7 circlip x Cuscinetto a sfere bearing x F00801 input shaft input shaft x NU30 bearing NU30 bearing x 6 F Albero primario primary shaft x 7 C712226J 6^ marcia 6th gear x 7 C J 6^ marcia 6th gear x 8 F pinion spacer pinion spacer x 9 C J ^ marcia th gear x 9 C712276J ^ marcia th gear x 10 C712026J ^ marcia th gear x 10 C712026J ^ marcia th gear x 11 C J 3^ marcia 3rd gear x 12 E71136J 1^ e 2^ marcia 1st-2nd gear x 12 C J 1^ e 2^ marcia 1st-2nd gear x 13 F stopping washer stopping washer x 1 F Vite albero primario primary shaft bolt x 1 F stopping hub stopping hub x D18 seeger D18 circlip x #7 C712226J See list of allowed gear #9 C J See list of allowed gear #9 C712276J See list of allowed gear #10 C712026J See list of allowed gear #10 C712026J See list of allowed gear #11 C J See list of allowed gear #12 E71136J See list of allowed gear #12 C J See list of allowed gear Short gear set Long gear set 1/3 1/3 16/30 16/30 18/27 18/27 20/2 20/2 2/27 26/26 21/20 2/22

94 e 11 1f 12 1g COD.2-D - GEARBOX 1a 1b 1c 1 1d

95 2D - GEARBOX Item Part Number Descrizione Description a F twin bearing assembly twin bearing assembly x 1b F bevel gear advance shim set bevel gear advance shim set x 1c F reverse gear pinion reverse gear pinion x 1d M7x30 Chc bolt M7x30 Chc bolt x 1e F secondary nut secondary nut x 1f F nut stopping washer nut stopping washer x 1g D30 circlip D30 circlip x K38x3x17 bearing K38x3x17 bearing x 3 C712226J 6th gear 6th gear x 3 C J 6th gear 6th gear x F hub hub x F00800 dog ring dog ring x 6 C J th gear th gear x 6 C712276J th gear th gear x 7 F00800 gear bearing inner race gear bearing inner race x 8 C712026J th gear th gear x 8 C712026J th gear th gear x 9 C J 3rd gear 3rd gear x 10 E71136J 1st-2nd gears 1st-2nd gears x 10 C J 1st-2nd gears 1st-2nd gears x 11 F st gear bearing inner race 1st gear bearing inner race x NU 206 bearing NU 206 bearing x # Number and stack of shim is free #3 C712226J See list of allowed gear #3 C J See list of allowed gear #6 C J See list of allowed gear #6 C712276J See list of allowed gear #8 C712026J See list of allowed gear #8 C712026J See list of allowed gear #9 C J See list of allowed gear #10 E71136J See list of allowed gear #10 C J See list of allowed gear Short gear set Long gear set 1/3 1/3 16/30 16/30 18/27 18/27 20/2 20/2 2/27 26/26 21/20 2/22

96 2 11 2b COD.2-E - GEARBOX 1 2a a 1

97 2E - GEARBOX Item Part Number Descrizione Description D8x10x12 lip seal D8x10x12 lip seal x 2 CPL Complete final drive 10x31 Complete final drive 10x31 x 2a F final drive cleaence shim set final drive cleaence shim set x 2b vis H M10x16 vis H M10x16 x AB 128 S03 bearing AB 128 S03 bearing x F D8 circlip D8 circlip x F0081 differential cap differential cap x 6 F sun gear sun gear x 7 F00007 half planet gear axle half planet gear axle x planet gear planet gear x 9 F00006 hub hub x 10 F00008 planet gear axle planet gear axle x 11 F00811 differential case differential case x D9 circlip D9 circlip x #2a F Number and stack of shim is free

98 a a b 12c a 8a COD.2-F - GEARBOX

99 2F - GEARBOX Item Part Number Descrizione Description Mx12 Chc bolt Mx12 Chc bolt x f washer f washer x 3 F potentiometer potentiometer x f10x2. o-ring f10x2. o-ring x HK 012 bearing HK 012 bearing x 6 F barell barell x 7 F fork axle fork axle x 8 F complete fork complete fork x 8a F selector pin selector pin x selector spring selector spring x 10 F selector washer selector washer x Mx10 CHc bolt Mx10 CHc bolt x 12 F10031 Complete dual pin rock Complete dual pin rock x 12a f10x2. o-ring f10x2. o-ring x 12b pusher spring pusher spring x 12c F pusher pusher x 13 F00900 dual pin rock dual pin rock x M6x16 Chc bolt M6x16 Chc bolt x f20x2. o-ring f20x2. o-ring x 16 F right selector closing block right selector closing block x PAP201 P10 bushing PAP201 P10 bushing x f29x2 o-ring f29x2 o-ring x 19 F selector axle selector axle x bearing bearing x f0 circlip f0 circlip x 22 F barrel stop barrel stop x M7x20 CHc bolt M7x20 CHc bolt x 2 F selector bushing selector bushing x 2 F selector axle bolt selector axle bolt x 26 F K powershift powershift x 27 F powershift shim set powershift shim set x 28 F Selector spacer Selector spacer x 29 F left selector closing block left selector closing block x 30 F reverser gear unlocking cable reverser gear unlocking cable x M6x12 CHc bolt M6x12 CHc bolt x M7x16 CHc bolt M7x16 CHc bolt x 33 F Complete indexor Complete indexor x goupille f18x2.dowel pin goupille f18x2.dowel pin x f16x2 o-ring f16x2 o-ring x indexor spring indexor spring x M8x16 H bolt M8x16 H bolt x 3 F reverse gear washer reverse gear washer x 36 F reverse gear axle reverse gear axle x 37 F Complete reverse gear Complete reverse gear x 37a HK 2020 bearing HK 2020 bearing x M8x20 Chc bolt M8x20 Chc bolt x 39 F bolt hat bolt hat x M10x3 CZHc bolt M10x3 CZHc bolt x f10,2x1x1 cupper washer f10,2x1x1 cupper washer x 2 F rocker guide rocker guide x f29x3 o-ring f29x3 o-ring x F complete reverse gear rocker complete reverse gear rocker x a F reverse gear pin reverse gear pin x F reverse gear nut reverse gear nut x # May be removed # May be removed

100 1 13d 21 13e c 13b COD.2-H - GEARBOX a

101 2H - GEARBOX Item Part Number Descrizione Description M6X20 CHc bolt M6X20 CHc bolt x 2 F oil tank plate oil tank plate x f2x3 o-ring f2x3 o-ring x F oil tank housing oil tank housing x F10208 drain plug drain plug x drain plug seal drain plug seal x 7 F plug plug x plug seal plug seal x 9 F venting fitting venting fitting x venting plug venting plug x fitting plug fitting plug x fitting plug seal fitting plug seal x 13 F main housing main housing x 13a F f12x1 pin f12x1 pin x 13b F rear casing stud rear casing stud x 13c F90031 reverse gear cable stop reverse gear cable stop 13d f8x2, o-ring f8x2, o-ring x 13e F f12 pin f12 pin x f208x3 o-ring f208x3 o-ring x M8x0 CHc bolt M8x0 CHc bolt x 16 F rear housing rear housing x M8x12 simmonds nut M8x12 simmonds nut x f10 nordlock washer f10 nordlock washer x M10x CHc bolt M10x CHc bolt x M10x3 CHc bolt M10x3 CHc bolt x M10x0 CHc bolt M10x0 CHc bolt x f6x3 o-ring f6x3 o-ring x M12x10 Hc bolt M12x10 Hc bolt x

102 COD.2-A - EXHAUST SYSTEM

103 2A - EXHAUST SYSTEM Item Part Number Descrizione Description Scarico Exhaust pipe x Distanziale Stay x Supporto scarico Exhaust stay x Molla Spring x CM8-M8 Testa a snodo Rod end x 6 DIN382-M18X1, Tappo esagono incassato Hexagon socket plug x 7 UNI931-M8X2 Vite TC CH Bolt x 8 DIN980-M8 Dado autobloccante trilobato Thin Hex Nut x 9 UNI89-M8 Dado esagonale basso Thin Hex Nut x 10 UNI880B-8 Rondella ondulata Crinckle Washer x #1 DIN382-M18X1, The item may be replaced by #2 UNI931-M8X2 The item may be replaced by #3 DIN980-M8 The item may be replaced by

104 COD. 2-B - CATALYTIC EXHAUST

105 2B - CATALYTIC EXHAUST Item Part Number Descrizione Description Scarico con catalizzatore Exhaust pipe with catalyzer x Culla scarico Exhaust bracket x Supporto scarico Exhaust stay x Molla Spring x 6 CM8-M8 Testa a snodo Rod end x 7 UNI931-M8X16 Vite TC CH bolt x 8 UNI931-M8X2 Vite TC CH Bolt x 9 DIN980-M8 Dado autobloccante trilobato Thin Hex Nut x 10 UNI88-M8 Dado esagonale Hex Nut x 11 UNI880B-8 Rondella ondulata Crinckle Washer x #2 UNI931-M8X16 The item may be replaced by #3 UNI931-M8X2 The item may be replaced by #2 DIN980-M8 The item may be replaced by

106 COD.26 - AIR INLET

107 26 - AIR INLET Item Part Number Descrizione Description Tubo outlet intercooler Intercooler outlet pipe x Tubo inlet intercooler Intercooler inlet pipe x Cassoncino superiore Airscoop Air box inferiore Lower airbox Intercooler Intercooler x Supporto sinistro airbox Airbox LH bracket Supporto destro airbox Airbox RH bracket Base supporto sirbox Airbox mounting base 10 E901 Manicotto Silicon hose x 11 PUFM620X1MF Silent block Silent block x 12 SCH Manicotto Silicon hose x 13 E Manicotto Silicon hose x 1 RE901 Manicotto Silicon hose x 1 ABA0-6X12 Fascetta Clamp x 16 ABA-6X12 Fascetta Clamp x 17 UNI931-MX12 Vite TC CH Bolt x 18 UNI7380-M6X16 Vite TB BH Bolt x 19 UNI7380-MX10 Vite TB BH Bolt x 20 UNI7380-M6X10 Vite TB BH Bolt x 21 UNI931-M6X10 Vite TC CH Bolt x 22 AST-0 K-Nut K-Nut x 23 UNI880B- Rondella ondulata Crinckle Washer x 2 UNI880B-6 Rondella ondulata Crinckle Washer x