TenCate Materials for the Consumer Footwear and Orthotics Markets
|
|
- Gwen MargaretMargaret Ray
- 8 years ago
- Views:
Transcription
1 TENCATE PERFORMANCE COMPOSITES TenCate Materials for the Consumer Footwear and Orthotics Markets Footwear Orthotics Skates Sports Gear Orthopedics TenCate CFRT Thermoplastic Composites
2 TENCATE PERFORMANCE COMPOSITES MATERIALS THAT MAKE A DIFFERENCE TenCate Performance Composites participates in applications ranging from transportation to footwear, from energy to electronics with the most complete line of thermoplastic and thermoset advanced composites. Website: provides our customers with easy access to product data, technical papers, and literature. Alternatively download the TenCate Selector Guide App. Interactive Materials Selection Guide is available on our website or as an app for your tablet computer or smartphone. Visit our website for more info:
3 Table of Contents TenCate Company Profile... 4 The Material Edge... 5 Manufacturing Overview Footwear Applications Designing , TenCate Advanced Composites, Inc. All rights reserved. Contents may not be reproduced in whole or in part without the written consent of TenCate. The TenCate logo is a registered trademark of TenCate Advanced Composites Inc. All other brand and product names are trademarks or registered trademarks of their respective companies. Technical data and specifications are subject to change without notice. TenCate Cetex, CFRT and all other related characters, logos and trade names are claims and/or registered trademarks TenCate and/or its subsidiaries. Use of trademarks, trade names and other IP rights of TenCate without express written approval of TenCate is strictly prohibited. ENVIR-Bond (EB) is TenCate s material innovation to improve the ease of processing at the factory level and help reduce the amount of harmful solvents used in the footwear manufacturing process. EB tie-layers are added for injection over molding. Printed in USA.
4 TENCATE PERFORMANCE COMPOSITES 4 TenCate CFRT Materials TenCate Advanced Composites Company Profile TenCate is a leading supplier of specialty materials ranging from ballistic armor protection and advanced composites to protective fabrics and geosynthetics. TenCate, a company with a rich 300+ year history, employs over 4,200 personnel in 15 countries and has annual sales in excess of $1 billion. All groups focus heavily on innovation, and on delivering value through materials technology. TenCate CFRT Materials TenCate's Performance Composites group represents TenCate's industrial thermoplastic products division which is part of TenCate Advanced Composites. TenCate Performance Composites provides thermoplastic laminates for the footwear/orthotics industries and serves many other industries with thermoplastic based unidirectional tapes based upon engineering polymers such as nylon, polyethylene, polypropylene and other such resins. Our composite materials can be found in over 100 million pairs of shoes worldwide and under the feet of more than 5 million patients who require podiatric correction. Additionally, TenCate composites are used for high performance braces in the orthopedic profession. Our composites are worn by all-star professional athletes, people who run 10K s, shoot hoops, try to break par, and climb mountains because they are there. TenCate's proprietary technology has advantages over other thermoplastic technologies in the method that the materials are produced, which leads to greater consistency and accuracy. TenCate composites have high durability with excellent damping and shock attenuation and resiliency, which results in enhanced energy return (spring) and response. TenCate composites provide superior stability and support, yet are lightweight and thin enough to minimize weight to reduce fatigue and stress. TenCate Performance Composites Locations: Camarillo, CA - Focus on high volume producer of TenCate CFRT thermplastic laminates and components. Burlington Ontario Canada - Producer of low cost TenCate CFRT uni-directional (UD) tape. Guangzhou, China - A Wholly Foreign Owned Enterprise (WFOE) established to manufacture components and value added assemblies from TenCate CFRT Materials.
5 TENCATE PERFORMANCE COMPOSITES 5 The Material Edge TenCate Performance Composites CFRT composite materials are used to enhance footwear performance. Our materials have unique attributes that, when used strategically, can reduce the weight of footwear substantially while increasing biomechanical stability. Our materials are used in combination with other components to create footwear which is truly engineered. The resilience (spring or responsiveness) effect of TenCate CFRT composite materials means they return to their original shape through millions of cycles thus contributing to reduced foot fatigue and injury prevention. TenCate CFRT materials have performance and weight advantages over chopped fiber reinforced or non-reinforced injection molded materials. The TenCate CFRT composite materials are tunable. They can be tailored to increase or limit the range of foot motion with fiber replacement, resin and component design. The fiber placement can be selected to provide the greatest mechanical properties in the desired direction. Similar to a continuous bridge, TenCate CFRT materials provides engineered strength from one end of the component to the other. TenCate CFRT materials can be designed with a different fiber types and content in each direction allowing for different properties in each direction. This allows the designer to develop a shoe component with different characteristics in the medial-lateral and longitudinal direction. Continuous Fiber Thermoset Cost Short Fiber Thermoplastic Long Fiber Thermoplastic Continuous Fiber Thermoplastic Performance
6 TENCATE PERFORMANCE COMPOSITES 6 TenCate CFRT Materials Sheet Manufacturing TenCate s vertically integrated manufacturing allows for lower production costs, greater flexibility and fast delivery. TenCate s factory is operated using computer aided manufacturing systems. The manufacturing processes for producing TenCate CFRT materials (continuous fiber reinforced thermoplastic) sheet materials includes resin formulation, prepreg, and lamination. Multiple opening lamination presses produce high throughput of consistent composite sheet materials, while allowing for manufacturing flexibility. The thermoplastic panels proceed from lamination presses to cutting operations. The 3 x 4 (910 x 1220 mm) sheet materials are produced in a multitude of grades and aesthetic options.
7 TENCATE PERFORMANCE COMPOSITES 7 TenCate CFRT Materials High Volume Component Manufacturing Using CAD/CAM programming and the latest waterjet technology, component parts are cut quickly and efficiently. Material utilization is maximized and tooling costs are minimized compared to other cutting processes. The waterjet-cut flat component patterns are then formed in seconds using relatively inexpensive tooling. TenCate ships over a million high quality composite components every month to facilities around the world. TenCate s integrated factor ensures timely delivery of high quality components to customers. TenCate CFRT composite materials are offered in both woven and uni-directional formats. Our technology blends the benefits of a thermoplastic polymer alloy with fiber reinforcement. The result is a synergistic material with greater strength than the two alone.
8 TENCATE PERFORMANCE COMPOSITES 8 Laminate Styles Products are offered in a variety of materials including: Glass Fiber - The most cost effective woven composite Carbon Fiber - The greatest strength to weight option available Carbon / Glass Fiber - The most efficient carbon product Our woven series materials are offered in a variety of weave styles and fiber (carbon and glass) combinations. Each is chosen for its own unique performance, aesthetic and economic attributes. Laminate Selection Guide: ORTHOTIC LAMINATE STYLES Fiber Reinforcement TenCate Cetex Product Laminate Style Resin Style Thickness mm / inches Rigidity N/cm 2 / lbs/in 2 Modulus GPa / Msi Strength MPa / ksi Carbon TC951 TL2100 Acrylic Semi-Flex 1.78/ / / /53 Carbon TC951 TL2100 Acrylic Semi-Rigid 2.29/ / / /49 Carbon TC951 TL2100 Acrylic Rigid 2.79/ / / /41 Carbon TC951 TL2100 Acrylic Ultra 2.92/ / / /44 Carbon TC951 TL6000-MOD1 Acrylic Twill Weave 2.92/ / / /48 Carbon TC951 TL6000-2L Acrylic Twill 2.2/ / / /55 Carbon TC951 TL6000-3L Acrylic Twill Weave 2.95/ / / /49 Carbon TC951 TL6000-4L Acrylic Twill Weave 3.43/ / / /66 All RTL panels are supplied with.007 (.0.178mm) films on the outside with the exception of TC951 (TL6000-MOD1).
9 TENCATE PERFORMANCE COMPOSITES 9 FOOTWEAR LAMINATE STYLES Orthotic Laminates Carbon TenCate Cetex Product TC950 Laminate Style SL2000/ SuperLam Resin PMMA Style Plain Weave/ Twill Weave Thickness mm / inches Rigidity N/cm 2 / lbs/in 2 Modulus GPa / Msi Strength MPa / ksi 0.25/ / /512 Carbon TC950 TL2000* PMMA Plain Weave 0.89/ / / /80 CARBON Carbon TC950 TW2000 PMMA Twill Weave 0.60/ / / /80 Carbon TC950 TW2000-TPU PMMA Twill Weave 0.87/ / / /39 Carbon TC950 TW2000-2L PMMA Twill Weave 1.30/ / / /97 Carbon/Glass TC950 BW1000 PMMA Carbon/Glass TC950 BW1000-PEB PMMA Basket Weave Basket Weave 0.98/ / / / / / / /25 CARBON/GLASS Carbon/Glass TC950 PW1000 PMMA Plain Weave 0.84/ / / /22 Carbon/Glass TC950 TW1000 PMMA Twill Weave 0.89/ / / /47 Carbon/Glass TC950 TW1000-TPU PMMA Twill Weave 1.0/ / / /48.7 Carbon/Glass TC950 TW1000-PEB TPU/PMMA Twill Weave 1.08/ / / /29 Glass TC950 AG18-2L PMMA Plain Weave 0.89/ / / /60 Glass TC950 AG33 PMMA Plain Weave 0.84/ / / /31 Glass TC950 XTS-3L ABS Unitape 0.90/ / / /65.3 Glass TC950 XTS-4L ABS Unitape 1.20/ / / /73 GLASS Glass TC950 TWAG PMMA Twill Weave 0.84/ / / /47 Glass TC970 SS-AG7544 TPU Plain Weave 0.50/ / /37 Glass TC970 SS-AG7781 TPU Plain Weave 0.2/ / /47 *Values shown are with PMMA core (0.33 mm PMMA core). Tensile ENVIR-Bond (EB) is TenCates material innovation to improve the ease of processing at the factory level and help reduce the amount of harmful solvents used in the footwear manufacturing process. EB tie-layers are added for injection over molding.
10 TENCATE PERFORMANCE COMPOSITES 10 Footwear Component Recommendations Turf Plate - Typically used in turf footwear, the turf plate is used in place of spring steel to limit the extension of the great toe. TenCate has developed a very specific material for this application. Some added benefits using CFRT is, it reduces the amount of heat transferred from the turf to the wearer s foot. Shank Plate - The shank plate is located under the midfoot or arch area of the foot as a support. This area of the shoe is often cut-out or sculpted. TenCate CFRT materials are used as a shank buried under the arch (typically in the midsole) or as an exposed torsional enhancement creating a bridge between the heel and forefoot. Both applications will reduce the weight of the footwear as typically other materials can be reduced by using the TenCate CFRT technology. The larger the shank plate, the more biomechanical support and the lighter the footwear can be. Spring Plate or Propulsion Plate - An extension of the shank plate, the spring plate or propulsion plate extends into the forefoot. TenCate CFRT materials have been extended even into the first and second metatarsal for added spring and resiliency. The plate can be engineered to give the desired balance of stiffness vs. compliance while absorbing the impact of the foot striking the ground. For example, when wings are added to the spring plate, it provides added medial/lateral control to the wearer. Sock Liner or Insole - As an aftermarket improvement or provided as a comfort or performance aspect of the footwear, TenCate CFRT composite materials can be used as a sock liner or insole providing added support just under the foot. Studies have shown using TenCate CFRT composite materials as a sock liner or insole will reduce foot fatigue, improve stability and make the footwear more comfortable. The composite material is thin and light providing support while not taking up too much room in the shoe. The shell can also be heat adjusted for customization. Bonding Guidelines Our TenCate CFRT materials can be In-Molded, Stock-Fit and Injection Over-Molded. The following are our bonding guidelines. Bonding requires that the surface be cleaned, but not dissolved with aggressive scrubbing or wiping, as the polymer can be removed exposing the fibers. Cleaners such as isopropyl alcohol, IPA, are preferred over aggressive solvents such as MEK. The surface of the material and adhesive layers should be free from contaminants such as mold release, oil from fingers in handling, etc. The content of aggressive solvents in primer and adhesives should be minimized where possible. Excessive wiping, brushing or pooling of cleaners, primers and adhesives should be avoided. Priming - Apply a thin layer of the primer with a clean brush with a light back and forth stroke. - Heat the material with primer at C ( F) for 2-3 minutes in a convection oven.
11 TENCATE PERFORMANCE COMPOSITES 11 Designing with TenCate CFRT Composite Materials Transitional/Contour Areas - Minimum radius should be a minimum of 6 mm. Holes and Hole Placement - Holes are not recommended for TenCate CFRT applications as they disrupt the continuous fiber of the component. Holes may be incorporated into a design keeping in mind large holes, mulitiple holes and holes close to the edge will weaken the composite and can cause catastrophic failure. Holes need to be addressed on a case by case basis. Flex Area - Materials placed in the flex zone will limit motion. Fiber placement and content will dictate the amount of motion limitation. For example, material running beyond the forefoot flex zone and around the forefoot will increase rigidity and limit flex. Arch Area - Use of arch wrap will add stiffness to the component and subsequently, the footwear. Arch wrap angle, height, and radius will determine the amount of stiffness added to the footwear. Extreme wrap, height or radius may cause foot discomfort. Carbon Fiber - Carbon fiber represents a noticeable increase in stiffness and weight reduction from fiberglass. It is also thinner than fiberglass. Carbon Direction - Materials are offered in all carbon, hybrid - carbon/ glass and all glass. In the hybrid material, the carbon direction will have more stiffness. Carbon should be used in the direction in which stiffness/ resiliency is desired. Exposed Areas - TenCate CFRT materials should be protected from objects which can cause abrasion, puncture, or fracture. Designs should be reviewed through TenCate Development for composite soundness and optimization. Our composite engineers are available to assist you in your application. Do not hesitate to contact us at Adhesive Application - Apply a thin layer of the adhesive with a clean brush with a light back and forth stroke. - Heat the material with adhesive at C ( F) for 2-3 minutes in a convection oven. Exposure to high temperature radiant heating elements should be avoided as the thermoplastic material can lose shape. Attach the plate with adhesive to the other properly prepared component (e.g. - outsole) by applying uniform pressure over the entire surface.
12 Camarillo CA, USA Burlington Ontario, Canada Morgan Hill CA, USA Fairfield CA, USA Nijverdal, Netherlands Langley Mill, UK 2015, TenCate Advanced Composites USA, Inc. and TenCate Advanced Armor USA, Inc. All rights reserved. Contents may not be reproduced in whole or in part without the written consent of TenCate. The TenCate logo is a registered trademark of TenCate Advanced Composites Inc. All other brand and product names are trademarks or registered trademarks of their respective companies. Technical data and specifications are subject to change without notice. TenCate Cetex and all other related characters, logos and trade names are claims and/or registered trademarks TenCate and/or its subsidiaries. Use of trademarks, trade names and other IP rights of TenCate without express written approval of TenCate is strictly prohibited. TENCATE PERFORMANCE COMPOSITES TENCATE PERFORMANCE COMPOSITES, USA 1150 Calle Suerte Camarillo, CA USA Tel: Fax: TENCATE PERFORMANCE COMPOSITES, CANADA 5035 N. Service Road, Bldg. A-1 Burlington, Ont., Canada L7L 5V2 Tel: Fax: TENCATE PERFORMANCE TENCATE ADVANCED COMPOSITES, CHINA COMPOSITES, USA Bldg. 11, #48 Hongmian Avenue Butterfield Blvd. Xinhua Town, Huadu District Morgan Hill, CA USA Guangzhou, China Tel: Tel: Fax: TENCATE PERFORMANCE COMPOSITES, TAIWAN No. 87, Zhongtai W. Road North District Taichung, Taiwan, ROC Tel: ipad / iphone / Android Apps TENCATE ADVANCED COMPOSITES, USA CCS Composites, LLC 2450 Cordelia Road Fairfield, CA USA Tel: Fax: or tcpcsales@tencate.com or advancedcomposites.europe@tencate.com (Europe) info@tcac-usa.com (USA) ISO 9001 Registered 2015, All data given is based on representative samples of the materials in question. Since the method and circumstances under which these materials are processed and tested are key to their performance, and TenCate Advanced Composites has no assurance of how its customers will use the material, the corporation cannot guarantee these properties. TenCate AmberTool, Cetex, CFRT, and all other related characters, logos and trade names are claims and/or registered trademarks TenCate and/or its subsidiaries. Use of trademarks, trade names and other IP rights of TenCate without express written approval of TenCate is strictly prohibited. ENVIR-Bond (EB) is Tencate s material innovation to improve the ease of processing at the factory level and help reduce the amount of harmful solvents used in the footwear manufacturing process. EB tie-layers are added for injection over molding. Photos courtesy of the respective companies. TCPC_CFRT-FootwearBrochure_V2_081715
PRODUCT DATA SHEET PRODUCT DESCRIPTION. Compressive Strength (0 ) ETW (1) ASTM D6641 176 ksi 1210 MPa
PRODUCT TYPE Polyetheretherketone (PEEK) Thermoplastic Resin System SERVICE TEMPERATURE Approximately 250 F (121 C) FEATURES Ambient temperature storage Flame retardant Low moisture absorption Good impact
More informationCrystal Clear Sealant
Crystal Clear Sealant Technical Data February, 2012 Product Description 3M Crystal Clear Sealant is a one component thermoplastic elastomer which forms permanent elastic bonds when used in surface sealing
More informationProduct Data. HexPly 8552 Epoxy matrix (180 C/356 F curing matrix)
HexPly 8552 Epoxy matrix (180 C/356 F curing matrix) Product Data Description HexPly 8552 is a high performance tough epoxy matrix for use in primary aerospace structures. It exhibits good impact resistance
More informationHexWeb CR III Corrosion Resistant Specification Grade Aluminum Honeycomb
Corrosion Resistant Specification Grade Aluminum Honeycomb Description 5052 and 5056 expanded aerospace grade aluminum honeycomb materials are available in a wide selection of cell sizes and foil gauges.
More informationComposite Materials. Mary P. Shafer. Fabric Development, Inc. Quakertown, PA 18951
Composite Materials Mary P. Shafer Fabric Development, Inc. Quakertown, PA 18951 Composite Material Two inherently different materials that when combined together produce a material with properties that
More informationFM 300-2 FILM ADHESIVE
FM 3002 FILM ADHESIVE DESCRIPTION FM 3002 film adhesive is a cure version of Cytec Engineered Materials widely used FM 300 film adhesive. It delivers the same superior high temperature performance, toughness
More information3M Thermally Conductive Adhesive Transfer Tapes
Technical Data July 215 3M Thermally Conductive Adhesive Transfer Tapes 885 881 8815 882 Product Description 885, 881, 8815 and 882 are designed to provide a preferential heat-transfer path between heat-generating
More informationVC 104+ Rigid Grade / Rigid Grade Imagine VC 104 Rigid Grade Commercial Customised
Page 1 of 6 instructions VC 104+ Rigid Grade / VC 104+ Rigid Grade Imagine / (for the rest of this document referred to as VC 104) can be applied to new and used trucks and trailers with painted rigid
More informationStronger Together. Designing and Manufacturing Composite Solutions for Industrial Applications
EN Stronger Together Designing and Manufacturing Composite Solutions for Industrial Applications The future belongs to composites The advanced solutions of tomorrow are made of composites. The rigid and
More informationUse of Continuous Fiber Reinforced Engineering Plastics: The Seat Pan of the Opel Astra OPC
Use of Continuous Fiber Reinforced Engineering Plastics: The Seat Pan of the Opel Astra OPC Jörg Schnorr, BASF SE, Dr. Ralf Langendorf, Adam Opel AG, Rüsselsheim, Jordan Kurikov, BASF SE, Ludwigshafen
More informationCarbon Fiber Composites Low Cost Materials & Manufacturing Options
Carbon Fiber Composites Low Cost Materials & Manufacturing Options George Husman Zoltek Companies, Inc. September 13, 2012 1 Carbon Fiber Markets All China Hexcel Formosa SGL Cytec AKSA Others 2011 Estimated
More informationPhosphoric Acid Anodized Aluminum Honeycomb
Phosphoric Acid Anodized Aluminum Honeycomb Description 02 and 06 expanded aerospace grade aluminum honeycomb materials are available in a wide selection of cell sizes and foil gauges. The HexWeb CR-PAA
More informationCYCOM 2040 EPOXY PREPREG
DESCRIPTION CYCOM 2040 is a very tough modified epoxy resin system with exceptional high temperature performance. It is suitable for highly stressed components exposed to elevated temperature environments
More informationRedux Film Adhesives, Foaming Films, Primers and Liquid Shims. About HEXCEL
About HEXCEL Hexcel is the largest US producer of carbon fibre; the world s largest weaver of structural fabrics; the number one producer of composite materials such as prepregs, film adhesives and honeycomb;
More informationGood Boards = Results
Section 2: Printed Circuit Board Fabrication & Solderability Good Boards = Results Board fabrication is one aspect of the electronics production industry that SMT assembly engineers often know little about.
More informationFinland s legendary running brand. 2011 spring / summer workbook
Finland s legendary running brand 2011 spring / summer workbook Moving forward since 1916 A History of Finnovation Our first product innovations were javelins and discuses: they taught us firsthand the
More informationHow to Build a Printed Circuit Board. Advanced Circuits Inc 2004
How to Build a Printed Circuit Board 1 This presentation is a work in progress. As methods and processes change it will be updated accordingly. It is intended only as an introduction to the production
More informationPLASTIC/METAL HYBRID TECHNOLOGY. Innovative Design Solutions for Structural Performance with Weight and Cost Reduction
PLASTIC/METAL HYBRID TECHNOLOGY Innovative Design Solutions for Structural Performance with Weight and Cost Reduction LANXESS Corporation Unites Plastic and Metal to Help Manufacturers Create Products
More informationRehabilitation of corroded pipelines and pipes with FibaRoll
Rehabilitation of corroded pipelines and pipes with FibaRoll Available exclusively from FTi Ltd Adheres to steel High tensile strength High flexural strength Corrosion protection Cost effective Simple
More informationOne Step Forward for Sustainability
One Step Forward for Sustainability RESILIENT RENEWABLE DURABILITY ENVIRONMENTAL- FRIENDLY PERFORMANCE LIFESTYLE HARD WORKING COMFORT WATER-RESISTANT CASUAL INNOVATIVE PASSION LIGHTWEIGHT CHALLENGES COMFORT
More informationSOLVING SECONDARY CONTAINMENT PROBLEMS
SOLVING SECONDARY CONTAINMENT PROBLEMS CEILCOTE CORROSION CONTROL PRODUCTS Leadership in Corrosion Problem Solving CEILCOTE As the pioneer and technological leader in polymer linings, coatings and flooring
More informationNEW ELECTRICAL SUBSTATION Building 300 SECTION 07 53 23 ETHYLENE-PROPYLENE-DIENE-MONOMER ROOFING WORK
ETHYLENE-PROPYLENE-DIENE-MONOMER ROOFING WORK PART 1 GENERAL 1.1 REFERENCES The publications listed below form a part of this specification to the extent referenced. The publications are referred to within
More informationScotch-Weld TM. Acrylic Adhesives. DP8405NS Green. Product Data Sheet. Date: March 2014 Supersedes: August 2013
Scotch-Weld TM Product Data Sheet Acrylic Adhesives Date: Supersedes: August 2013 Product Description 3M TM Scotch-Weld Acrylic Adhesives are high performance, twopart acrylic adhesives that offer good
More information3 Single-Coated Foam Tapes
3 Single-Coated Foam Tapes Technical Data May, 2008 Product Description 3M Single-Coated Foam Tapes will adhere to a variety of substrates, including latex-painted wood, lacquered wood, enameled steel,
More informationTECHNICAL DATA SHEET
EPOXY - NG1001 Formulated Resin System for Pre-preg Process General information Description: TECHNICAL DATA SHEET EPOXY - NG1001 is a formulated epoxy based resin system for hot melt pre-preg and pressure
More informationExternal Wrapping of Steel Riser Pipe. Case Study HJ3 CS200902
External Wrapping of Steel Riser Pipe Case Study HJ3 CS200902 Introduction Refineries process a wide variety of petroleum products. As part of the process, they rely on cooling towers, which recycle water
More informationIntroduction of New Large Tow Carbon Fiber Products and PCM* Technology. * Prepreg Compression Molding
Introduction of New Large Tow Carbon Fiber Products and PCM* Technology * Prepreg Compression Molding Mitsubishi Rayon Carbon Fiber Business for Industrial applications MCHC Group Organization Chemical
More informationBending, Forming and Flexing Printed Circuits
Bending, Forming and Flexing Printed Circuits John Coonrod Rogers Corporation Introduction: In the printed circuit board industry there are generally two main types of circuit boards; there are rigid printed
More informationTechnical Data Sheet February 2014
Scotch-Weld Technical Data Sheet February 2014 Product Description s are high performance, two-part acrylic adhesives that offer excellent shear, peel, and impact performance. These toughened products
More informationScotchgard Multi-Layer Protective Film 1004
Scotchgard Multi-Layer Protective Film 1004 3 Technical Bulletin September, 2008 Scotchgard Multi-Layer Protective Film 1004 Application Kit (3M Part No. 70-0710-4666-1) includes: (clockwise) Heavy Duty
More informationPeel & Seal Self-Stick Roofing Solutions
Peel & Seal Self-Stick Roofing Solutions Ideal for Low Slope Applications Waterproof and Weatherproof Energy Efficient Tough and Durable Versatile, Effective Sealing Around Protrusions Perfect for Vents,
More informationSan Francisco Circuits, Inc.
Your Doorway to Innovation San Francisco Circuits, Inc. Bridging Concepts with Reality Flex PCB Introduction to Flex Circuits What is Flex Circuits? From Wikipedia - a technology for assembling electronic
More information3M Electrically Conductive Adhesive Transfer Tape 9703
Technical Data April 2011 M Electrically Conductive Adhesive Transfer Tape 970 Product Description M Electrically Conductive Adhesive Transfer Tape 970 is a pressure sensitive adhesive (PSA) transfer tape
More information3 Destructible Vinyl Label Material 7613T / 7930T
3 Destructible Vinyl Label Material Technical Data September, 2010 Product Description 3M Destructible Vinyl Label Materials 7613T and 7930T are consistent, smooth, topcoated films designed to exhibit
More information3 Thermal Transfer Acrylate Label Material 3921
3 Thermal Transfer Acrylate Label Material Technical Data April, 2008 Product Description 3M Thermal Transfer Acrylate Label Material consists of a non-topcoated acrylate facestock designed for thermal
More informationPeel Adhesion of Pressure Sensitive Tape
Harmonized International Standard Call Letters PSTC 101 Date of Issuance 10/00 Revised 10/03 Revised 05/07 Peel Adhesion of Pressure Sensitive Tape 1. SCOPE 1.1 These methods cover the measurement of the
More informationThe Original Carbon Fiber Reinforced Polymer System
Infrastructure The Original Carbon Fiber Reinforced Polymer System Phone: 52.292.39 Toll Free: 866.38.269 Fax: 52.48.5274 282 E. Fort Lowell Rd. Tucson, AZ 8576 www.dowaksausa.com Test results are supported
More informationOur feet are much more important to our health than we imagine and giving them the care they deserve will benefit you.
Insoles Our feet are much more important to our health than we imagine and giving them the care they deserve will benefit you. Our feet may ache due to different biomechanical problems, anatomical or orthopedic
More informationad notam INSTALLATION GUIDE MONITOR ON GLASS MOUNTING SYSTEM (MGS) Art.No. MGS-xxxx
ad notam MONITOR ON GLASS MOUNTING SYSTEM (MGS) Art.No. MGS-xxxx INSTALLATION GUIDE FOR YOUR SAFETY Please read all safety information thoroughly before using the product. Not complying with the instructions
More informationFoam Injection Molding:
Foam Injection Molding: Unique Process Solutions for Light Weighting Automotive Plastic Parts Steve Braig President & CEO Trexel, Inc. AGENDA Technology Overview > Chemical Foaming > Physical Foaming Foamed
More informationAmphenol Sincere. Electronic Integration & Flexible Printed Circuits. Aerospace. Health Care. Heavy Equipment HEV. Industrial
Amphenol Sincere Health Care Aerospace Heavy Equipment HEV Industrial Electronic Integration & Flexible Printed Circuits About Amphenol The second largest manufacturers of interconnect products 87 worldwide
More informationCare and Maintenance for Wood Flooring
Care and Maintenance for Wood Flooring The finishing technology used for Tarkett wood floorings makes them the best choice for easy maintenance. To preserve all the beauty of your Tarkett wood flooring,
More informationThe Quality Connection. High Performance Cable Solutions for the World of Semiconductors
The Quality Connection High Performance Cable Solutions for the World of Semiconductors 2 Total Flexibility for Applications with the Toughest Requirements LEONI is your long-term, reliable partner supplying
More informationThe Quality Connection. High Performance Cable Solutions for the World of Semiconductors
The Quality Connection High Performance Cable Solutions for the World of Semiconductors 2 Total Flexibility for Applications with the Toughest Requirements LEONI is your long-term, reliable partner supplying
More informationFRICTION MATERIALS & BONDING SERVICES
FRICTION MATERIALS & BONDING SERVICES World Class Friction Materials & Bonding Services The Industry Leader Midwest Brake has been a leading supplier of non asbestos industrial friction material and bonding
More informationNajaar/Winter 2014 Produkt Presentatie
Najaar/Winter 2014 Produkt Presentatie Quickforce Footwear Technology Key technologies POWER BAND => stability ADIWEAR/ADITUFF => abrasion resistance ADIPRENE/ ADIPRENE+ => cushion + impulse ADITUFF Iron
More informationChapter 5 Bridge Deck Slabs. Bridge Engineering 1
Chapter 5 Bridge Deck Slabs Bridge Engineering 1 Basic types of bridge decks In-situ reinforced concrete deck- (most common type) Pre-cast concrete deck (minimize the use of local labor) Open steel grid
More informationWATERPROOFING OF WET ROOMS
WATERPROOFING OF WET ROOMS Waterproofing under tiles For longterm enjoyment of a wetroom area a complete and resistant waterproofing system is an important precondition. Most tiles are by themselves waterproof
More informationDocument Library TS Data Sheet 46012 46013 46014
Document Library TS Data Sheet 46012 46013 46014 Rev:2 Effective: 01/11/2002 3M Marine High Strength Repair Filler Data Sheet Status: Active 3M Part No.(s) 46012 46013 46014 3M Part Descriptor(s) Pint
More informationScotch-Weld TM. Epoxy Adhesive 1838 B/A Green 1838 B/A Tan 1838-L B/A Translucent. Technical Data February, 2016. Product Description
3 Scotch-Weld TM 1838 1838 1838-L Technical Data February, 2016 Description 3M TM Scotch-Weld TM s 1838 and are controlled flow products; Scotch-Weld 1838-L is flowable. These epoxy adhesives are two-part,
More informationWATERPROOFING OF REINFORCED CONCRETE FLAT ROOF 12
WATERPROOFING OF REINFORCED CONCRETE FLAT ROOF 12 87 88 GOOD INDUSTRY PRACTICES 12 WATERPROOFING OF REINFORCED CONCRETE FLAT ROOF 12.1 BACKGROUND Most roofs in Singapore are constructed using reinforced
More informationBroad Base. Best Solutions. SIGRAPREG Prepregs Made from Carbon, Glass, and Aramid Fibers
Broad Base. Best Solutions. COMPOSITEs Fibers and MATERIALS SIGRAPREG Prepregs Made from Carbon, Glass, and Aramid Fibers 2 Carbon fibers and composites made by SGL Group. Q Comprehensive product range
More informationScotch-Weld TM. DP410 Off-White. Product Data Sheet. Product Description. Key Features Rapid cure at room temperature; cure rate may be accelerated
Scotch-Weld TM Product Data Sheet DP410 Off-White Supersedes: October 2001 Product Description DP410 epoxy adhesive is a low flow, two-part epoxy based structural adhesive. It is designed for use where
More information1.1.2 Polypropylene The polypropylene must be a white opaque film, 1 2 mil thick. Biaxial orientation is preferred.
Library of Congress Preservation Directorate Specification Number 700 704 09 Specifications for Pressure Sensitive Adhesive Labels For Application to Single Paper Sheets and Text Pages of Bound Books For
More informationENGINEERING SPECIFICATION PULTRUDED DYNARAIL FIBERGLASS LADDER & LADDER CAGES
ENGINEERING SPECIFICATION PULTRUDED DYNARAIL FIBERGLASS LADDER & LADDER CAGES PART 1 - GENERAL 1.1 SCOPE OF WORK SECTION 06610 FIBERGLASS REINFORCED PLASTICS (FRP) FABRICATIONS PULTRUDED SQUARE TUBE LADDER
More information3M Bumpon Protective Products Molded Shapes - Colored and Clear Series SJ5000 SJ5300 SJ5400 SJ5500 SJ5700 SJ6100
Technical Data July 2015 3M Bumpon Protective Products Molded Shapes - Colored and Clear Series SJ5000 SJ5300 SJ5400 SJ5500 SJ5700 SJ6100 Product Description 3M Bumpon Protective Products Molded Shapes
More informationDetermining the Right Molding Process for Part Design
Determining the Right Molding Process for Part Design How RIM Molding Advantages Compare with Traditional Production Technologies Page 2 Introduction This White Paper details the part production processes
More informationNingbo Yinzhou Keao Prototyping & Mould Factory Services include : CNC machining prototypes,
Ningbo Yinzhou Keao Prototyping & Mould Factory Services include : CNC machining prototypes, STEREOLITHOGRAPHY (SLA) Selective Laser Sintering (SLS) RTV MOLDING AND CAST URETHANE PROTOTYPES Tel : +86 574
More informationRight Angle Grinder USA MADE FLAP DISCS
USA MADE FLAP DISC Right Angle Grinder CGW Offers the Most Extensive Line of Flap Discs in the Marketplace CGW flap discs blend and finish in one operation which replaces the traditional twostep grinding
More informationSomos Materials. Injection Molding Using Rapid Tooling
Somos Materials Injection Molding Using Rapid Tooling Introduction Testing a new design before costly tooling is created can save companies time and money. For many years, the only process available to
More informationMany of our fiberglass models have optional lay-ups to suit their alternate intended usage.
COMPARING THE UNIQUE PROPERTIES OF FIBERGLASS, CARBON-FIBER AND KEVLAR, AS WELL AS THE BENEFITS OF INCORPORATING ONE OR MORE OF THESE MATERIALS INTO THE CONSTRUCTION OF YOUR COMPOSITE KAYAK Fiberglass
More informationT H A N K S F O R A T T E N D I N G OUR. FLEX-RIGID PCBs. Presented by: Nechan Naicker
T H A N K S F O R A T T E N D I N G OUR TECHNICAL WEBINAR SERIES FLEX-RIGID PCBs Presented by: Nechan Naicker We don t just sell PCBs. We sell sleep. Cirtech EDA is the exclusive SA representative of the
More informationCaledonian Submersible Pump Cables for Oil Industry >> IEEE 1018 >> IEEE 1019 >> API RP 11S5
Caledonian Submersible Pump Cables for Oil Industry >> IEEE 1018 >> IEEE 1019 >> API RP 11S5 Caledonian Windmill Cables COMPANY PROFILE Table of Content Caledonian, established in 1978, offers one of the
More information3 Scotch-Weld TM. Urethane Adhesives 3532 B/A 3535 B/A 3549 B/A. Technical Data January, 2010
3 Scotch-Weld TM Technical Data January, 2010 Product Description 3M Scotch-Weld 3532 B/A, 3535 B/A and 3549 B/A are two-component, polyurethane adhesives which cure at room temperature or with heat to
More information3M Products for Solar Energy. Designed for efficiency. Built to last.
3M Products for Solar Energy Designed for efficiency. Built to last. 2 3M Products for Solar Energy From factory to field, 3M is with you. Every step of the way. Making solar power more efficient. More
More informationHow To Repair A Steel Pier With A Watertight Frame
INNOVATIVE FRP PILING REPAIR WITHOUT THE USE OF COFFER DAMS Steve Bazinet, Larry Cercone, Franz Worth Air Logistics Corporation Field-Applied Composite Systems Group Pasadena, California 91107 ABSTRACT
More informationPRODUCT DEVELOPMENT FOR OUT- OF-AUTOCLAVE (OOA) MANUFACTURE OF AEROSPACE STRUCTURES
PRODUCT DEVELOPMENT FOR OUT- OF-AUTOCLAVE (OOA) MANUFACTURE OF AEROSPACE STRUCTURES Steve Mortimer, Matthew J. Smith Hexcel Duxford, Cambridgeshire, UK Elizabeth Olk Hexcel Dublin, California, USA Overview
More informationScotch-Weld. Low-Odor Acrylic Adhesives DP810 DP810 NS. Technical Data June, 2004
3 Scotch-Weld TM Technical Data June, 2004 Product Description 3M Scotch-Weld Low-Odor Acrylic Adhesive DP810 and DP810 NS are twopart, 1:1 mix ratio, toughened structural adhesives with less odor than
More informationAramid Fibre/Phenolic Honeycomb
Aramid Fibre/Phenolic Honeycomb Product Data Description HexWeb HRH-10 is manufactured from aramid fibre sheets. A thermosetting adhesive is used to bond these sheets at the nodes, and, after expanding
More informationGENERAL RUBBER LINING PRINCIPLES
GENERAL RUBBER LINING PRINCIPLES I. METAL PREREQUISITES Metal to be lined should meet the requirements as stated in section 8 Metal Fabrication and section 12 Blasting and Cementing Procedures. The surface
More informationTERRA Safety Footwear
TERRA Safety Footwear TERRA Safety Footwear www.totalsafetyfootwear.com 2011 Brochure Footwear Athletics Your third 12-hour shift in a row and you re just getting started.you re sore in parts you can t
More informationA GUIDE TO HIGH PERFORMANCE POLYURETHANE UPHOLSTERY FABRICS
A GUIDE TO HIGH PERFORMANCE POLYURETHANE UPHOLSTERY FABRICS WHAT IS POLYURETHANE AND HOW IS IT MADE? Polyurethane, commonly referred to as PU, is a polymer that is considered to be a highly resilient,
More informationWhite Paper. Recommendations for Installing Flash LEDs on Flex Circuits. By Shereen Lim. Abstract. What is a Flex Circuit?
Recommendations for Installing Flash LEDs on Circuits By Shereen Lim White Paper Abstract For the mobile market some PCB assemblies have been converted to flex circuit assemblies, in part because flex
More informationMaking motorcycle helmets safer I N C T I N S T I V E. PlaquetteAnglaise.indd 1 5/12/06 17:13:50
Making motorcycle helmets safer SAFETY SHARK OT E R C P T I V E I N C T I N S T PlaquetteAnglaise.indd 1 5/12/06 17:13:50 Shark integrates safety into its helmets in this sequential way: 1. SAFETY RESEARCH
More informationDENSO WATERPROOFING SYSTEMS
DENSO WATERPROOFING SYSTEMS Approved Quality Management System AS/NZS ISO 9001:2008 Lloyds Register Certificate N o Mel 0927759 Denso (Australia) Pty Ltd A MEMBER OF WINN & COALES INTERNATIONAL 411 413
More informationINJECTION MOLDING COOLING TIME REDUCTION AND THERMAL STRESS ANALYSIS
INJECTION MOLDING COOLING TIME REDUCTION AND THERMAL STRESS ANALYSIS Tom Kimerling University of Massachusetts, Amherst MIE 605 Finite Element Analysis Spring 2002 ABSTRACT A FEA transient thermal structural
More informationRRIM DESIGN MANUAL ADDENDUM FOR EXTERIOR BODY PANELS
RRIM DESIGN MANUAL ADDENDUM FOR EXTERIOR BODY PANELS Published by the Automotive Composites Alliance (ACA), formerly the SMC Automotive Alliance. 2004 by Automotive Composites Alliance Published: June,
More informationLightweight structures with new car technologies
Lightweight structures with new car technologies Julian Haspel Application Development, LANXESS Business Unit Semi-Crystalline Products Automotive Days Poland October 27-28, 2011 LANXESS A premium supplier
More informationWall braces with a swivel head are included to accommodate all roof pitches.
ULTRA JACK MODEL # 2000 Wall braces with a swivel head are included to accommodate all roof pitches. Product Specifications Model # 2000 Description: Ultra Jack Unit Pack: Weight per Pack: 1 / Carton 32
More informationFiberglass Rebar (GFRP Rebar)
Concrete Protection Products, Inc. Fiberglass Rebar (GFRP Rebar) Product Guide Specification October, 2013 Specifier Notes: This product specification is written according to the Construction Specifications
More informationGuide to adhesively mounting accelerometers
Guide to adhesively mounting accelerometers cmyk Guide to adhesively mounting accelerometers Purpose This technical paper identifies and clarifies issues regarding adhesive mounting of accelerometers.
More informationMatrix system with enhanced mechanical performance: new infusion system for wind energy applications enables lighter, longer, lower cost rotor blades
White Paper Matrix system with enhanced mechanical performance: new infusion system for wind energy applications enables lighter, longer, lower cost rotor blades Malte Wichmann Momentive Specialty Chemicals
More information3 Laser Toner Printable Polyester Label Material 7840TL
3 Laser Toner Printable Polyester Label Material page 1 of 5 Technical Data February 15, 1999 Supersedes July 1, 1997 Construction (Calipers are nominal values.) Facestock Adhesive Liner 2.3 mil (58 micron)
More informationHIGH PERFORMANCE PRE-APPLIED SYSTEM FOR BLIND SIDE & BELOW GRADE WATERPROOFING APPLICATIONS
BSW HIGH PERFORMANCE PRE-APPLIED SYSTEM FOR BLIND SIDE & BELOW GRADE WATERPROOFING APPLICATIONS BSW is a fully reinforced Pre-Applied system membrane designed for horizontal and vertical external blind-side
More information3 Scotch-Weld TM. Urethane Adhesives 3532 B/A 3535 B/A 3549 B/A. Technical Data March, 2002
3 Scotch-Weld TM Technical Data March, 2002 Product Description 3M TM Scotch-Weld TM 3532 B/A, 3535 B/A and 3549 B/A are two-component, polyurethane adhesives which cure at room temperature or with heat
More informationGreen Thread Product Data
Green Thread Product Data Applications Dilute Acids Caustics Produced Water Industrial Waste Hot Water Condensate Return Materials and Construction All pipe manufactured by filament winding process using
More informationSECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS
SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS PART 1 GENERAL 1.01 SECTION INCLUDES A. The requirements for pipe material and installation in sewer and drainage collection systems. All materials
More informationFire-Damage or Freeze-Thaw of Strengthening Concrete Using Ultra High Performance Concrete
Fire-Damage or Freeze-Thaw of Strengthening Concrete Using Ultra High Performance Concrete Ming-Gin Lee 1,a, Yi-Shuo Huang 1,b 1 Department of Construction Engineering, Chaoyang University of Technology,Taichung
More informationglass & Glazing Products
glass & Glazing Products WallMaker Create an unlimited variety of bright, beautiful and secure interior environments with the easy-to-install Stylmark WallMaker glass wall system. This versatile system
More informationSPECIFICATIONS FOR BRIDGE CONSTRUCTION SECTION 16 BRIDGE DECK WATERPROOFING. 16.1 General...16-1. 16.2 Materials...16-1. 16.3 Equipment...
SPECIFICATIONS FOR BRIDGE CONSTRUCTION SECTION 16 BRIDGE DECK WATERPROOFING TABLE OF CONTENTS 16.1 General...16-1 16.2 Materials...16-1 16.3 Equipment...16-1 16.4 Installation...16-2 16.4.1 Traffic Restrictions...16-2
More informationGSI. Geosynthetic Institute GRI. 475 Kedron Avenue Folsom, PA 19033-1208 USA TEL (610) 522-8440 FAX (610) 522-8441 GII GAI GCI. GRI Test Method GM21
Geosynthetic Institute 4 Kedron Avenue Folsom, PA 133-1208 USA TEL (610) 522-8440 FAX (610) 522-8441 GEI GRI GSI GAI GCI GII Revision 4: December 17, 2012 Revision schedule on pg. 11 GRI Test Method GM21
More information2014 FURNITURE. www.samsonitefurniture.com (844) 218-7049
www.samsonitefurniture.com (844) 218-7049 Manufacturing specifications are subject to change without notice. Dimensions refer to packing capacity and are approximate. California Proposition 65 Warning:
More informationACL Protective Footwear Design
Project Number: CAB/GRG-1108 ACL Protective Footwear Design A Major Qualifying Project Report: Submitted to the Faculty Of the WORCESTER POLYTECHNIC INSTITUTE In partial fulfillment of the requirements
More informationDELTA Premium Moisture Management Systems for Foundations.
DELTA protects property. Saves energy. Creates comfort. DELTA Premium Moisture Management Systems for Foundations. DELTA Premium Moisture Management Systems provide the best protection for foundations.
More informationAPE T CFRP Aslan 500
Carbon Fiber Reinforced Polymer (CFRP) Tape is used for structural strengthening of concrete, masonry or timber elements using the technique known as Near Surface Mount or NSM strengthening. Use of CFRP
More information3M Thermal Bonding Film AF42
Technical Data August 2015 3M Thermal Bonding Film AF42 Product Description 3M Thermal Bonding Film AF42 is an epoxy, thermoset film adhesive developed for structural bonding of metal, glass and other
More informationENGINEERING SPECIFICATION FIBERGRATE MOLDED GRATING. January 24, 2014 06610-1
ENGINEERING SPECIFICATION FIBERGRATE MOLDED GRATING January 24, 2014 06610-1 SECTION 06610 FIBERGLASS REINFORCED PLASTICS (FRP) FABRICATIONS MOLDED GRATING PART 1 - GENERAL 1.1 SCOPE OF WORK A. The CONTRACTOR
More informationRooflighting and Glazing
POLYESTER SHEET Rooflighting and Glazing safelight ultra standard economy 02 Rooflighting and Glazing Trilite is a range of translucent fibre glass reinforced polyester rooflighting and glazing sheet,
More informationFLEXIBLE CIRCUITS MANUFACTURING
IPC-DVD-37 FLEXIBLE CIRCUITS MANUFACTURING Below is a copy of the narration for DVD-37. The contents of this script were developed by a review group of industry experts and were based on the best available
More information