Question: 1 Which associated object must be restored on the system prior to restoring a logical file?

Transcription

1 Question: 1 Which associated object must be restored on the system prior to restoring a logical file? A. The access path B. The physical file C. The field reference file D. The user profile that created the file Question: 2 Exhibit: *** MISSING*** Which of the following can be determined from the job description? A. The user profile that submitted the job B. The job queue where the job waits to run C. The data the job is scheduled to execute D. The output queue where job results are sent Question: 3 An operator has been told that job LONGTEST will take 8 hours to complete. LONGTEST is in QBATCH with the night's production work, which will run unattended. What should the operator do to guarantee that LONGTEST runs after th other jobs? A. Hold LONGTEST B. Change LONG Test's job priority to 1 C. Change LONG Test's job priority 9 D. Change LONGTEST's output priority to 1 Question: 4 When using the File Transfer Protocol (FTP) to transfer program objects from one isecries to another, which of the following must be done? A. Programs must be placed in a SAVE. B. Standard FTP commands must be issued. C. The Send Network File command must be issued D. Programs must be moved individually in binary mode. Question: 5 A users job ended abnormally. Because the job is no longer active in the system, the joblog can not be viewed using option 10 (Display job log) from the "Display job" menu screen. What other option might be used to display the joblog? A. Option 1, Display job status attributes B. Option 2, Display job definition attributes C. Option 3, Display job run attributes, if active D. Option 4, Display spooled files, if active or on job queue Page 1 of 27

2 Question: 6 What does an operator need to do to prepare a new tape for use in a backup? A. Clear the tape. B. Clean the tape. C. Initialize the tape. D. Clean the tape drive. Question: 7 During a complete backup of the system, another tape needs to be loaded in the tape drive TAP01. After the tape is loaded, the following message is received: Device TAP01 cannot process loaded volume. (C R INZ) To continue and complete the backup, the operator should do which of the following? A. Choose the Retry option B. Select the continue-processing option C. Cancel the current save and redo with new tapes D. Choose the initialization option for the loaded tape, then continue the save. Question: 8 The cleanup option have been set up in the CLEANUP menu. An operator needs to verify that the cleanup jobs have completed successfully. Where are these messages located? A. The QCLEANUP data area B. The QPGMR message queue C. The QSYSOPR message queue D. The message queue of the user who ran cleanup Question: 9 Which series of commands would be used to end and restart the FTP server? A. ENDFTP STRFTP B. ENDTCPSVC SERVER(*FTP) STRTCPSVC SERVER(*FTP) C. ENDTCPSVR SERVER(*FTP) STRTCPSVR SERVER (*FTP) D. ENDHOSTSVR SERVER(*FTP)STRHOSTSVR SERVER(*FTP) Question: 10 During a save of a library the following message is encountered: Volume TAP01 on device TAP01 is write protected. (c R) Which of the following should be done prior to responding to the message? A. Vary off the tape volume device and vary it back on again. B. Reinitialize the tape volume TAP001 to clear the tape. C. Change the status of the tape device to be write enabled. D. Eject the tape, write-enable the tape and reinsert it into the tape device. Page 2 of 27

3 Question: 11 An operator will place the system into a restricted state in 10 minutes and needs to notify all users to sign off. Which command would the operator enter? A. SNDBRKMSG MSG (The system will be coming down in 10 minutes, please sign off now') TOMSGQ (*ALLWS) B. SNDBRKMSG MSG (The system will be coming down in 10 minutes, please sign off now') TOMSGQ (*ALLACT) C. SNDBRKMSG MSG (The system will be coming down in 10 minutes, please sign off now') TOMSGQ (*ALLWS) MSGTYPE(*INQ) D. SNDBRKMSG MSG (The system will be coming down in 10 minutes, please sign off now') TOMSGQ (*ALLACT) MSGTYPE (*INFO) Question: 12 An Operator would use which of the following commands to back up the isereies operating system? A. SAVSTG B. SAVSYS C. SAVLICPGM D. SAVLIB(*IBM) Question: 13 On a non-logical partitioned iseries server, all system and user jobs appear to have stopped processing or hung due to a failure of critical operating system program. Where would the system reference code (SRC) indicating the possible cause of the system failure be displayed? A. In the QSYSOPR message queue B. In the QHST system history log C. In the Operation Consol device joblog D. In the front control panel LCD display window Question: 14 A programmer (BILLH) called to ask why his job had not run. The operator saw the job in a work with jobs display. Job queue/ Job user status QPMGR TESTJOB BILLH Queue not assigned What should the operator do to run this job? A. Use STRSBS to start subsystem QPMGR B. Use CHGJOB to change TEST JOB's job queue C. Use CHGSBSD to change the job queue assigned to QPMGR D. Use CRTSBSD to create a subsystem description for QPMGR Question: 15 An IPL is planned to occur immediately after the last interactive job has ended. Which of the Page 3 of 27

4 following commands would be used to achieve this? A. ENDSYS OPTION (*IMMED) B. ENDSYS OPTION (*CNTRLD) C. PWRDWNSYS OPTION (*CNTRLD) D. PWRDWNSYS OPTION (*IMMED) Question: 16 A users has repeatedly attempted to log on without using the correct password, thus causing the profile to be disables. What actions need to be performed with the work with user profiles command to correct the problem? A. Reset the users password then tell the user the new password B. Enable the user profile rest the password then tell the user the new password C. Enable the users profile lookup the password then tell the user what the password is D. Delete the users profile create a new profile for the user then tell the usr he new password Question: 17 Many users have called with complaints of their workstations being extremely slow to respond to simple user input. Response time is reporting greater than 60 seconds. What is the best FIRST response to identify the cause of the problem? A. Use the work with problems command to check for system problems. B. Use the work with active jobs command to identify unusual job activity on the system. C. Use the work with job command to check the status and performance of the users interactive jobs. D. Use the work with configuration status command to check the status of the workstation controllers serving the workstations. Question: 18 An operator finds that the ECS modem is not working. After verifying the device status, what command would the operator use to determine the problem and then take appropriate action? A. ANZPRB B. VFYCMN C. DSPPRB D. WRKDEVD Question: 19 How would an operator find the actual time of a completed job if the job is no longer available? A. WRKACT JOB B. DSPLOG QHST C. DSPHST JOB (ARFIX) D. RTVJOBLOG (ARFIX) ATTR (TIME) Page 4 of 27

5 Question: 20 A spooled file has a status of OPN on the work with spoonled files display. What does this mean? A. The spooled files is currently being printed B. The spooled file is in the process of being created C. The spooled file is in an output queue, ready to be printed D. The spooled file has been created selected and is being prepared for printing Question: 21 An operator receives a request to print a report. The printer runs out of paper about halfway through the report. After reloading the forms, which response to the following message will the operator use to continue printing the report? End of form on printer PRT02. (CHI PAGE ) A. H B. I C. C D. PAGE 1 Question: 22 An operator needs to back up all objects that have changed in user libraries since the last full backup. The backup should run at 3:00 AM on Sunday morning. What command would the operator enter to accomplish this task? A. SAVCHGOBJ OBJ (*ALL)LIB(*ALLUSR)DEV(TAP01) B. SBMJOBCMD(SAVCHGOBJ)*ALL)LIB(*ALLUSR)DEV(TAP01)) C. SBMJOBCMD(SAVCHGOBJ)*ALL)LIB(*ALLUSR)DEV(TAP01)) SCDDATE(*SUN) SCDTIME('03:00:00') D. SBMJOBCMD(SAVCHGOBJ)*ALL)LIB(*ALLUSR)DEV(TAP01)) HOLD (*YES)SCDDAT (*SUN)SCDTIME('03:00:00') Question: 23 An operator suspects that a user may have gone home without signing off. Which of the elapsed values of the interactive job shows the number of times the enter key or a function key was pressed? A. Response B. Interactions C. Auxiliary I/O D. CPU percentage Question: 24 A payroll job ended abnormally. How would an operator determine the cause of the problem? A. Display the job log B. Work with the active jobs Page 5 of 27

6 C. Work with the system status D. Display the job description Question: 25 Which of the following defines the steps required to reallocate a switchable tape drive from partition-a to partition-b? a. Vary off the tape drive on partition-a, vary on the tape drive on partition-b. b. Disconnect the tape drive cable from partition-a, connect the tape drive cable to partition-b. c. Delete the tape drive device description from partition-a, create the tape drive device description on partition-b d. Remove the IOP controlling the tape drive IOA from partition-a, add the IOP controlling the tape drive IOA to partition-b Question: 26 How can an operator determine which output queues are assigned to which of the printers? A. Use the WRKWRTR*ALL command. B. Use the WRKDEVD*PRT command. C. Use the WRKSPLF*ALL command. D. Use the WRKSBSJOB QSPL command. Question: 27 The following is a portion of job log from a backup: Message...: Processing not complete for volume M10071 on device TAP03. Cause... : Output tape for file QSYSTAP in library QSYS could not be closed normally after at least 0 blocks were written in file sequence number 12. Ending labels, tape marks, or both may be missing from the volume. Which of the following is the result of this job? A. The job was cancelled by the operator. B. The job terminated because of media error. C. The specified object to be saved does not exist. D. The job terminated because of a security violation. Question: 28 On an iseries, which of the following is the correct display and mode setting to prevent any screens requiring a response during an IPL? A. 01 B N B. 01 B M C. 01 D M D. 01 A M Question: 29 To end a job on a job queue, which of the following procedures would be used? Page 6 of 27

7 A. WRKJOBQ QBATCH Select option 4 for the job to be ended B. CLRJOBQ QBATCH Select option 1 for the job to be ended C. WRKJOBQE QBATCH Select option 7 for the job to be ended D. CHGJOBQ QBATCH Select option 10 for the job to be ended Question: 30 Given the following information is provided: * The internet address or name of the remote system * The spool file name and number * The job name What additional information is necessary to send a spooled file via a TCP/IP network to another system's output queue? A. The name of remote print writer B. The name of the destination printer queue C. The name of the intended user on the remote system D. The name of the intended user and his address on the remote system. Question: 31 An operator ran a payroll job, and then noticed that the proper forms needed to print the paychecks had not yet arrived from the payroll department. The job has completed and the spooled file named PAYCHECK, is in output queue PRT01. How can the operator delay printing the checks while still processing other jobs in the queue? A. Hold PAYCHECK B. Cancel the job C. Hold queue PRT01 D. Stop writer PRT01 Question: 32 A job is submitted to job queue QBATCH. Both the job and the job queue are held. When will the job become eligible for execution? A. When the job is released B. When the job queue is released C. When both the job and the job queue are released D. When either the job queue or the job is released. Question: 33 The following system message has just appeared on the operator console: Page 7 of 27

8 "Serious storage condition may exist" Which command should be used to view the "%system ASP used"? A. WRKACTJOB B. WRKSYSSTS C. WRKSYSACT D. WRKTAPSTS Question: 34 An operator was instructed to save the library ABCCOMPANY to save file named ABCCOMPANY in library QGPL. After running save command the following message is displayed: Save file ABCCOMPANY in QGPL already contains data. (C G) Which of the following SAVLIB parameters needed to be specified for prevent the message from being displayed? A. STG B. CLEAR C. UPDHST D. PRECHK Question: 35 There are 42 spooled files in PRT01's held output queue waiting to print. Another printer (PRT02) is available. Which of the following would allow PRT02 to print the spooled files? A. Change printer PRT02 to use writer PRT0 B. Change printer PRT02 to use output queue PRT01 C. Change writer PRT02 to process output queue PRT01 D. Change queue PRT01 so that it is attached to printer PRT02 Question: 36 A new local twinax device has been properly set up and attached to local workstation controller. What system value must be turned on to have the system automatically create, name and vary on the device? A. QAUTORMT B. QAUTOVRT C. QAUTOCFG D. QDEVNAMING Question: 37 A user reports that the system appears to be hung. The operator display active jobs and notices that the user's interactive session has a status of MSGW. What should the operator do to correct the problem? A. End the user's session B. Tell the user to press the Reset key. Page 8 of 27

9 C. Tell user to sign off and sign back on the system. D. Cary off the user's display and then vary it back on. Question: 38 An operator is using the intermediate assistance level to view messages and received the following message: Device DSP 42 no longer communicating. How can the operator get a more detailed description of the problem? A. Enter the DSPMSGHLP command. B. Put the cursor on the message and press F1. C. Press F1. Then select the message from the list that is displayed. D. Type "5" in the option field in front of the message and press Enter. Question: 39 Following are lines from a WRKUSRJOB display: OPT JOB USER TYPE STATUS Payr201 Paymgr Batch Jobq Payr202 paymgr batch jobq What should be done to ensure PAYR201 will complete before PAYR202 starts? A. CancelJob PAYR202. Then resubmit it. B. Move job PAYR201 to the top of the queue C. Hold job PAYR202. When PAYR201 ends, release job PAYR202. D. Hold job PAYR202. When PAYR201 starts, release job PAYR202. Question: 40 What is the aspirate method for deleting all of the spool files from a given output queue in a single operation? A. Delete the spooled files using the "Clear Output Queue" command. B. Delete all the spooled files using the "Delete Text File" command. C. Display the spooled files on the output queue with the "Work with output queue" command, then select the delete option for each of them. D. Delete the output queue using the "Delete output queue" command then recreate the output queue using the "Create Output Queue"command Question: 41 Which of the following is the correct sequence of steps to install a delayed PTF? 1. Apply PTF 2. IPL 3. Load PTF 4. Receive PTF A. 1,2,3,4 B. 2,4,3,1 Page 9 of 27

10 C. 4,1,3,2 D. 4,3,1,2 Question: 42 An operator has been asked to not run any scheduled jobs that being with the character string "PAYR"/ Which command will stop the job schedule entries for such jobs from running today, but remain eligible to run at a future time? A. WRKJOBSCDE JOB(*ALL)ENTRYNBR(PAYR*) B. HLDJOBSCDE JOB (PAYR*) ENTRYNBR (*ALL) C. RMVJOBSCDE JOB (PAYR*)ENTRYNBR (*ONLY) D. RLSJOBSCDE JOB (PAYR*)ENTRYNBR(*ONLY) Question: 43 A user indicates that communications are out in certain parts of a facility. Which should the operator looks to diagnose the cause of the problem? A. WRKCMNJOB B. WRKSYSSTS C. WRKSYSACT D. WRKCFGSTS Question: 44 To create a system backup of the entire system for disaster recovery purposes, which SAVE menu option is used to create a full system backup? A. Option 20 B. Option 21 C. Option 22 D. Option 23 Question: 45 The SAVLIB (ACCTLIB) command was successfully run on Saturday, and the entire system was saved on Sunday. The SAVCHGOBJ LIB (ACCTLIB) command was run Monday through Friday.Assuming the default parameter values, the Friday backup will contain which objects? A. Object in ACCTLIB that were changed or created since Sunday B. Object in ACCTLIB that were changed or created since ACCTLIB was created C. Object in ACCTLIB that were changed or created since Saturday(the last SAVLIB) D. Object in ACCTLIB that were changed or created since THURSDAY (THE LAST savchgobj) Question: 46 The operator is attempting to vary on a communications line. The vary on of the line failed. Which of the following describes why the vary on failed? Page 10 of 27

11 A. The modem is turned off. B. The line is already varied on. C. The controller is in failed status. D. Another line using the resource name is already varied on. Question: 47 Both a remote output queue and printer device have been created for routing IP print output. The status of the output queue is RDY and the status of the printer is END. There are spool files that are ready to be printed, but none of them are printing: What must be done to start printing the spool files? A. Turn on the printer B. Start the LDP server C. Release the spool files D. Start the remote writer Question: 48 To display the status of device WS07, an operator would use which of the following commands? A. DSPCFGSTS*DEV B. WRKCFGSTS*DEV C. DSPCFGSTS WS07 D. WRKCFGSTS WS07 Question: 49 An operator has released a job to a writer, and the job does not print. What command should the operator use to ensure that the writer is started? A. DSPLOG B. WRKOUTQ C. WRKSPLF D. WRKCFGSTS*PRT Question: 50 What condition will cause an IPL f a secondary partition to come up in an abnormal state? A. Attempting to restart the partition from the D source (tape or optical) B. Powering down the primary partition without first powering down the secondary partition C. Setting a secondary partition IPL status to restart when the primary partition is powered up D. Moving processor resources to the secondary partition immediately before restarting the partition Question: 51 A writer is running and the associated printer is printing. How can an operator determine how many spooled files have not yet printer? Page 11 of 27

12 A. Check the writer's status B. Check the output queue's status C. Check the printer's status messages D. Check the jobs in the spool subsystem Question: 52 Use the following information to answer this Question: Printer TBMPT20 is printing. Description status ACHTRCTL VARIED OFF ACHTRDEV VARIED OFF BSC2300 VARIED OFF BSC VARIED OFF CTLO1 ACTIVE DSP01 SIGNON DISPLAY DSP99 SIGNON DISPLAY Tbmws01 SIGNON DISPLAY TBMPT20 FAILED Given the above information on the WRKCFGSTS*CTL screen, what action must the operator take to bring the printer on-line without affecting other devices? A. Vary on printer TBMPT20 B. Vary on controller CTL01 C. Vary off then vary on printer TBMPT20 D. Vary off, then vary on controller CTL01 Question: 53 A PTF has the status of "Temporary applied - CAN". When will the action pending field be cleared? A. After the next IPL B. After the screen is refreshed C. After the PTF has been applied D. After the PTF has been superseded Question: 54 A programmer submitted a job to QBATCH1, a held job queue. What will the operator need to do to run this job without running other jobs in QBATCH? A. Release the job B. Release the job queue C. Move the job to a released job queue D. Hold the job then move the job to a released job queue. Question: 55 Exhibit: Page 12 of 27

13 *** MISSING **** After loading a group PTF package, the operator entered the apply PTF (APYPTF) command and pressed F4 to view the parameters as shown in the exhibit. Which parameter must have its value changed in order to do the following? Activate as many PTFs as possible now Set the IPL action to apply all delayed PTFs A. Delayed PTFs B. Extent of change C. IPL apply options D. PTF number to select Question: 56 A user has submitted a job to run in batch which requires a response. Which command is used to get to the message queue to enter the response? A. DSPLOG B. DSPMSG C. DSPUSRPRF D. DSPMSG QSYSOPR Question: 57 An operator needs to bring down the QINTER subsystem. Which command would allow the current interactive jobs to end normally and not allow any new interactive users to get a sign-on screen? A. ENDSYS B. PWRDWNSYS C. ENDSBS SBS(QINTER)OPTION(*IMMED) D. ENDSBS SBS(QINTER)OPTION(*CNTRLD) Question: 58 An operator was directed to save the INVOICE02 file on the tape already loaded in the TAP01 tape drive. The following message was received: Cannot allocate device TAP01 How should the operator proceed to determine why the tape was not available? A. Determine if the tape drive is powered on B. Use DSPTAP TAP01 to determine tape availability C. Use WRKCFGSTS *DEV to determine tape drive status D. Use the WRKSYSSTS command to determine tape drive status Question: 59 An operator ends a job *IMMED option. What will happen to the job being ended? A. All job switches will be set properly B. The job will end after all database updates have been completed. C. The job will end without completing all of the database updates Page 13 of 27

14 D. The job will be moved to another job queue where it will be ended. Question: 60 Under what condition would an operator use the Save While Active parameter when saving libraries or objects? A. To save non-critical applications B. To continuously save changes to objects as they occur C. To create a snapshot of system activity at any given time D. To save object from a library even if they are being updated. Question: 61 In which of the following locations could an operator look to determine when a specific object had last been saved? A. Library B. Library attributes C. Object description D. System operator message queue Question: 62 A request is received for 2 copies of the output for a job the payroll manager just ran. The job's output is waiting to print on PRT03. The operator should do which of the following to fulfill the request? A. Change the Copies attribute of the spooled file B. Change the Copies attribute of the writer program. C. Change the Copies attribute of the printer device D. Change the Copies attribute of the job description Question: 63 Which command will correctly submit the company's payroll job called "PAYROLL" and obtain the necessary job queue and routing data from the payroll job description? A. SBMJOB CMD (PAYROLL)JOB(PAYROLL)JOBD(*USRPRF) B. SBMJOB CMD (PAYROLL)JOBD(PAYROLL)JSBMFOR(PAYROLL) C. SBMJOB CMD (CALLPAYROLL)JOB(PAYROLL)JOBD(*USRPRF) D. SBMJOB CMD (CALLPAYROLL)JOB(PAYROLL)JOBD(PAYROLL) Question: 64 Which of the following menus is used to schedule system shut down and start up? A. POWER B. JOBSCD C. BACKUP Page 14 of 27

15 D. CONFIG Question: 65 Which of the following occurs when a writer is ended in a controlled mode? A. The writer program stops at the end of the current file. B. The writer program stops immediately, deleting the rest of the file. C. The writer program stops immediately, keeping the rest of the file in the queue. D. The writer program stops at the end of the current page, keeping the rest of the file in the queue. Question: 66 A job is in a single threaded job queue and cannot start because a job is already active in that job queue. What action must be performed on the active job to allow the next job in the job queue to start? A. HLDJOB B. ENDJOB C. TFRJOB D. GHGJOB Question: 67 A user calls the operator requesting an immediate printout. The printout is queued behind several hundred files and will not be printed for several hours without operator intervention. How can the operator ensure this user's file prints next? A. Change the job queue priority to "1". B. Change the spooled file's output attribute to "1". C. Change the spooled file's print sequence attribute to "NEXT". D. Restart the writer, specifying the spooled file to be the first printed. Question: 68 Installing an operating system PTF which of the following would be impacted? A. IBM supplied object(s) B. User created object(s) C. Newly installed object(s) on the system D. Changes the authority of object(s) on the system Question: 69 How can an operator get an estimate of how many pages remain to be printed by all the spooled files on a specific output queue? A. Use "Work with Writer" to display the writer attributes. One of the attributes is the number of pages yet to print. Page 15 of 27

16 B. Use "Work with Output Queue" to display the files on the output queue. Add up the pages listed for each listed spooled file. C. Use "Work with Spooled Files" and display the spooled files by output queue. Add the pages listed for each listed spooled file. D. User "Work with Output Queue Description" to display the description. Included in the description is the number of pages yet to print. Question: 70 PC users are trying to connect to an iseries via ETH1 and cannot get the terminal emulator to display a signon screen. There are multiple Ethernet lines configured on the system. The Ethernet line and controller are active for ETH1, and the device is varied on. What needs to be done to change the status of the device to active without disrupting Ethernet connections and traffic on other lines? A. Restart TCP/IP B. IPL the system C. Start the TCP/IP interface for the line D. Vary off the Ethernet line and vary it back on Question: 71 An Operator receives a message that one of the disk drives is bad and needs to be replaced. After notifying the System Administrator, the Operator is directed to make a complete backup of the system. Which of the following commands can be used to back up the entire system? A. SAV B. SAVSTG C. SAVSYS D. SAVLIB Question: 72 The operator is directed to save the changed contents in ACCTLIB twice daily at 11 AM and 11 PM. Which of the following commands would be used to save objects changed since 11 AM on October 24, 2002? A. SAVCHGOBJ OBJ(*ALL) LIB(ACCTLIB) DEV(TAP01) SCDDATE('10/24/02') SCDTIME('23:00:00') B. SAVCHGOBJ OBJ(*ALL) LIB(ACCTLIB) (DEV(TAP01) REFDATE('10/24/02') REFTIME('23:00:00') C. SAVCHGOBJ OBJ(*ALL) LIB(ACCTLIB) DEV(TAP01) REFDATE('10/24/02') REFTIME('11:00:00') D. SAVCHGOBJ OBJ(*ALL) LIB(ACCTLIB) DEV(TAP01) SCDDATE('10/24/02') SCDTIME('11:00:00') Question: 73 After an Operator runs a backup, which of the following commands can be used to determine if the backup completed successfully? Page 16 of 27

17 A. DSPJOB B. DSPLIB C. DSPOBJ D. DSPJOBLOG Question: 74 Which of the following actions would ensure that a spooled file remains on the system after it has been successfully printed? A. Change the spooled file's SAVE attribute. B. Change the writer to retain the spooled file. C. Copy the spooled file to an output queue that is in held status. D. Move the spooled file to an output queue configured for duplex printing. Question: 75 What information is displayed when viewing all job queues? A. Status of the job queues Subsystem assigned to the job queue B. Number of jobs currently in each job queue Time each job was submitted C. Status of the subsystem assigned to each job queue Status of each job queue D. Number of jobs currently in each job queue Time each job is scheduled to run Question: 76 An operator needs to initialize a tape that was last used on a non-iserial system. Which paratemer on the INZTAP command will allow the tape to be initialized for the iseries? A. CHECK(*NO) B. CLEAR(*YES) C. NEWVOL(*NONE) D. CODE(*EBCDIC) Question: 77 As a result of a form type change, an operator verified that the form is properly aligned in the printer. The following message was then displayed: Verify alignment on printer MYPTR. (I G N R E C) Which of the following is a proper response to the message to complete the printing? A. I B. C C. N D. R E. E Page 17 of 27

18 Question: 78 Given the following command to add a scheduled job to the job scheduler, when will this job execute? ADDJOBSCDE JOB (BANKJOB1) CALL PGM(SBPROD/CLME53) PARM(*ALL) FRQ(*MONTHLY) SCDDATE(*MONTMEN) SCDTIME('23:59:00') RCYACN(*SBMMLD) A. Once per month on the last day of the month. B. Every day at until the end of the month. C. One time only during the last month of the year. D. It will not execute, because it was added with *SBMHLD in the RCYACN field. Question: 79 Which of the following scenarios would be used to hold a job on a job queue? A. WRKJOBQ QBATCH Enter option 3 on the job to be held Press the enter key B. CHGJOBQ QBATCH Enter option 5 on the job to be held Press the enter key C. HLDJOBQ QBATCH Enter option 10 on the job to be held Press the enter key D. FNDJOBQE QBATCH Enter option 3 on the job to be held Press the enter key Question: 80 When using File Transfer Protocol (FTP) to send a SAVF file between iseries systems, which of the following conditions must be met? A. The file transfer must be in binary mode. B. The file cannot be active on the source system. C. The receiving SAVF must not exist on the target system. D. The Operator must be logged into the target system as QSYSOPR. Question: 81 A PTF has the status of "Permanently applied -CAN". When will the PTF become active? A. After the next IPL. B. After the PTF has been applied. C. After the PTF has been superseded. D. After all of the requirements to active the PTF have been met. Question: 82 An operator normally runs a backup job using the command SBMJOB CMD(CALL ACCTBKUP). Because of other work being performed, the job cannot be run until 1 a.m. on Sunday. What command can be used to submit the job on Friday and have it eligible for execution at the designated time? A. SBMJOB CMD(CALL ACCTBKUP) DATE(*SUN) TIME(01:00:00) Page 18 of 27

19 B. WRKJOBCDE CMD(CALL ACCTBKUP) DATE(*SUN) TIME(01:00:00) C. SBMJOB CMD(CALL ACCTBKUP) SCDDATE(*SUN) SCDTIME(01:00:00) D. WRKJOBSCDE CMD(CALL ACCTBKUP) SCDDATE(*SUN) SCDTIME(01:00:00) Question: 83 An operator is looking for a job in the QEZJOBLOG output queue. What information is needed to identify the correct spool file? A. Job Name B. Job Name, User Name and Job Number C. Job Name, File number and Timestamp D. Job Name, User Name and File number Question: 84 An operator has been asked to prepare a backup tape to be restored on another iseries server. Which SAVLIB parameter is used to prepare the tape for the broadest number of iseries systems? A. CLEAR(*ALL) B. ACCPTH(*YES) C. DTACPR(*YES) D. USEOPTBLK(*NO) Question: 85 Which of the following must be done to ensure that only the console retains connectivity to the system? A. ENDSYSJOB B. PWRDWNSYS C. ENDSBS SBS(*ALL) D. ENDSBS SBS(QUINTER) Question: 86 A system operator wants to schedule the system to shut down on Friday night and restart on Monday morning. What would the operator type to get the menu where this can be selected? A. go ipl B. go power C. go shutdown D. go iplsched Question: 87 When changing the job priority for a job that is waiting in a JOBQ, what are the valid values that can be used? Page 19 of 27

20 A. Valid values range from 0 through 9, where 0 is the highest priority and 9 is the lowest priority. B. Valid values range from 0 through 9, where 9 is the highest priority and 0 is the lowest priority. C. Valid values range from "A" through "Z", where "Z" is the highest priority and "A" is the lowest priority. D. Valid values range from -100 through -999, where -999 is the highest priority and -100 is the lowest priority. Question: 88 The clean up options have been set up in the CLEANUP menu. In which IBM supplied subsystem does this job run? A. The batch subsystem. B. The user work subsystem. C. The controlling subsystem. D. The system work subsystem. Question: 89 How can an operator tell if a writer will automatically end when its output queue becomes empty? A. Display the writer's status. B. Display the writer's attributes. C. Display the writer's message queue. D. Display the writer's output queue status. Question: 90 The iseries server was powered down while electrical maintenance work was performed on the data center UPS. What mode must be displayed on the control panel to power up the system without further operator intervention? A. Auto B. Manual C. Secure D. Normal Question: 91 An operator performed a backup of all changed objects. Which command would be used to restore SLS to the ACCOUNT02 library from this backup? A. RSTOBJ OBJ(SLS092502) SAVLIB(ACCOUNT02) DEV(TAP01) B. RSTOBJ OBJ(SLS092502) SAVCHG(ACCOUNT02) DEV(TAP01) C. RSTCHGOBJ OBJ(SLS092502) SAVLIB(ACCOUNT02) DEV(TAP01) D. RSTCHGOBJ OBJ(SLS092502) SAVCHG(ACCOUNT02) DEV(TAP01) Question: 92 Which of the following statuses is displayed for a fail up line that is ready to communicate prior to Page 20 of 27

21 connecting with a remote system? A. ACTIVE B. VARIED ON C. VARY ON PENDING D. CONNECT PENDING Question: 93 An operator accidentally deleted a spool file before it was printed. What must the operator do to recover the spool file? A. Rerun the job that created it. B. Use the IBM-supplied RSTSPLF command. C. Restore the spool file from the last backup tape. D. Use iseries Navigator to restore the file from the recycle bin. Question: 94 An operator has been asked to run a large test job (CALL TESTLIB/TESTPGM) in batch mode overnight, with a special library list to make sure that production is not affected. Which of the following would ensure that the correct library list is used? A. SBMJOB CMD(CALL PGM(TESTLIB/TESTPGM)) JOB(TESTJOB) JOBD(*USRPRF) INLLIBL(TESTLIB QGPL QTEMP) B. Use the EDTLIBL command to fix the library list for the current session, and use SBMJOB CMD(CALL PGM(TESTLIB/TESTPGM)) JOB(TESTJOB) INLLIBL(*JOBD) C. Use the EDTLIBL command to fix the library list for the current session, and use SBMJOB CMD(CALL PGM/TESTLIB/TESTPGM)) JOB(TESTJOB) JOBD(USER) INLLIBL(*CURRENT) D. Create a JOBD called TESTJOBD and add in the appropriate libraries to it, in the correct order, and use SBMJOB CMD(CALL PGM(TESTPGM)) JOB(TESTJOB) JOBD(TESTJOBD) INLLIBL(*SYSVAL) Question: 95 While reviewing system messages in the QSYSOPR message queue, the operator notices the following message: * *Attention* Resource SOC02 failed How would the operator access the "Work with Problems" menu screen to allow further analysis of the problem? A. Select help B. Type 'go problems' on the command line at the bottom of the screen. C. Press the F3 key to exit, then type 'WRKPRBANL' on the command line. D. Position the cursor to the error message Select function key to run problem analysis Question: 96 Which command is used to display the status of the line description BANKTWO? A. DSPLIND LIND(BANKTWO) B. WRKLIND LIND(BANKTWO) Page 21 of 27

22 C. WRKLINSTS LIND(BANKTWO) D. WRKCFGSTS CFGTYPE(*LIN) CFGD(BANKTWO) Question: 97 Which of the following commands will save a directory stored in the IFS? A. SAV B. SAVOBJ C. SAVDLO D. SAVLIB Question: 98 Based on the following message: Message... : Load form type '*STD' device ITMPLJ4 writer ITMPLJ4. (G B I M R C) What is the correct response to process this file and continue using standard forms for future jobs? A. G B. I C. C D. H Question: 99 In the intermediate assistance level, how can an operator learn more about what a message means or how to respond to it? A. Go to the Messages menu. B. Put the cursor on the message and press the F1 (Help) key. C. Enter the Work with Message Descriptions (WRKMSGD) command. D. Put the cursor on the response line and press the F1 (Help) key. Question: 100 Which command will end all TCP services? A. ENDTCP B. ENDHISTSVR C. ENDJOB *TCP D. ENDTCPSVR SERVER(*NETSVR *TELNET *FTP *TFTP) Question: 101 Which of the following commands is used to save user profiles to a save file in a library that does not exist in the library list? A. SAVSECDTA DEV(*SAVF) SAVF(SAVF1) B. SAVSECDTA DEV(*SAVF) SAVF(ABC/SAVF1) Page 22 of 27

23 C. SAVSECDTA DEV(*SAVF) SAVF(*LIBL/SAVF1) D. SAVSECDTA DEV(*SAVF) SAVF(*CURLIB/SAVF1) Question: 102 A cumulative PTF package needs to be loaded and applied to the primary partition. Which of the following is recommended prior to IPLing the primary partition? A. Power down all secondary partitions. B. Allocate all processor resources to the primary partition. C. End all interactive subsystems on the secondary partitions. D. Disable the virtual LAN connections between the partitions. Question: 103 An operator ran a SAVLIB command using TAP01 as the tape device. A message stating the "Cannot allocate device TAP01" was displayed. Which of the following is a reason for this message being displayed? A. The tape device is not found. B. The tape device object is damaged. C. Another job is using the tape device. D. The operator does not have authority to the tape device. Question: 104 Exhibit: Missing Which of the following can be determined from the job description? A. What user profile submitted the job. B. The library list associated with the job. C. The output queue where the output will be sent. D. The job queue from which the job will be selected to run. Question: 105 USERJOBA and USERJOBB were both submitted to a single threaded job queue BATCH1. USERJOBA went active immediately and is a very long running job. The operator needs to move USERJOBB to job queue BATCH2 so it will start running immediately. Which command will accomplish this task? A. TFRJOB JOB(USERJOBB) OUTQ(*LIBL/BATCH2) B. CHGJOB JOB(USERJOBB) OUTQ(*LIBL/BATCH2) C. TFRJOB JOB(USERJOBB) JOBQ(*LIBL/BATCH2) D. CHGJOB JOB(USERJOBB) JOBQ(*LIBL/BATCH2) Question: 106 What command is used to display the system history log? Page 23 of 27

24 A. DSPLOG B. DSPHSTLOG C. DSPJOBLOG D. DSPSYSLOG Question: 107 An operator is asked to send a break message requiring a response from the following message queues: UserA UserB Which of the following commands will accomplish this request? A. SNDMSG MS(MESSAGE) TOMSGQ(USERA USERB) MSGTYPE(*INQ) B. SNDBRKMSG MSG(MESSAGE) TOMSGQ(USERA USERB) MSGTYPE(*INQ) C. SNDBRKMSG MSG(MESSAGE) TOMSGQ(*ALLWS) MSGTYPE(*INQ) D. SNDBRKMSG MSG(MESSAGE) TOMSGQ(USERA) MSGTYPE(*INQ) SNDBRKMSG MSG(MESSAGE) TOMSGQ(USERB) MSGTYPE(*INQ) Question: 108 An operator received the following message when attempting to display a tape in the TAP01 drive Additional Message Information Message ID.... : CPF6760 Severity..... : 40 Message Type... : Diagnostic Data sent.... : 09/30/02 Time Sent.... : 13:48:33 Message.. : Device TAP01 not ready. Which of the following will resolve this error? A. Vary Off than Vary On the device. B. Issue the DSPTAP DEV(TAP01) command. C. Intilize the tape using the INZTAP DEV(TAPO1) command. D. Ensure the tape is loaded and the tape drive is varied on. Question: 109 A user has typed the wrong password more than the maximum allowed attempts. This has caused the profile to be disabled. What message queue contains the message that states the user profile has been disabled? A. QHST B. QSYSMSG C. QSECOFR D. QUSERMSG Question: 110 Which of the following conditions must be met to save the entire system? A. Spool files must be cleared. B. The controlling subsystem must be ended. C. The system must be placed in a restricted state. D. All display devices other than the console must be varied off. Page 24 of 27

25 Question: 111 The operator was asked to save a series of objects. During the save process the following message is displayed: Message ID.: CPF3701 Severity..: 20 Message type..: Diagnostic Data sent...; 09/17/02 Time sent...: 19:23:41 While viewing this message, which of the following is the most direct method to determine why these four objects were not saved? A. Display the history log. B. Display message details. C. Display message in job log. D. View the QSYSOPR message queue messages. Question: 112 Given the following screen: Description Status Job ETHER ACTIVE ETHER ACTIVE ETHER ACTIVE QTCPIP QTCP Which task should be performed to prevent the following message from appearing after varying off the Ethernet line? Device ETHER cannot be varied off at this time (C G) Reply... A. Vary off ETHER line B. Vary off ETHER device C. End the TCP interface D. Vary off ETHER controller Question: 113 System One has a remote output queue A01 set up with System Two as the remote system. System Two's output queue is B01. How would the operator get an existing spooled file on System One to System Two? A. Send the spooled file to user PRINTER at System Two. B. Send the spooled file to output queue A01 on System Two. C. Send the spooled file to output queue B01 on System One. D. Change the spooled file's attributes to specify output queue A01. Question: 114 Output PRT01 shows a status of "Held". What does that mean? A. A serious error exists. Spooled files can be held, but output queues cannot be held. B. Spooled files that were in the queue before the queue was held will be held in the queue. New spooled files will be printed. C. Spooled files that were in the queue before the queue was held will be printed. New spooled Page 25 of 27

26 files will be held in the queue. D. Spooled files that were in the queue before the queue was held will be held in queue. New spooled files will also be held in the queue. Question: 115 An authorized user has inadvertently disabled their user profile (AS400USER). Which command would immediately re-enable the user profile, permitting the user to sign on? A. CHGUSRPRF USRPRF(AS400USER) STATUS(*ENABLED) B. CHGUSRPRF USRPRF(AS400USER) PWDEXP(*NO) STATUS(*SAME) C. CHGUSRPRF USRPRF(AS400USER) PASSWORD(NEWPWD) PWDEXP(*NO) D. CHGUSRPRF USRPRF(AS400USER) PWFEXP(*YES) STATUS(*SAME) LMTCPB(*YES) Question: 116 In preparation to add a new workstation, an operator needs a list of all local workstations currently attached to controller CTL01. Which command should be used? A. PRTCTLADR CTLD(CTL01) B. PRTCTLDEV CTLD(CTL01) C. PRTDEVADR CTLD(CTL01) D. DSPDEVADR CTLD(CTL01) OPTION(*PRINT) Question: 117 What us the definition of CPU percentage for an active job? A. The percent of a processor used by the job over the time period that the job was active. B. The percent of processing unit time attributed to a job compared to all other active jobs. C. The percent of processing unit time attributed to a job compared to all other active and waiting jobs. D. The percent of processing unit time attributed to a job over the elapsed time compared to the measurement time interval. Question: 118 A job named "USERJOB1" has been running for an unusually long period of time and is utilizing a large amount of CPU resources. Which command will immediately end the job and delete all spool files produces by the job? A. ENDJOB(USERJOB1) OPTION(*IMMED) SPLFILE(*NO) B. ENDJOB(USERJOB1) OPTION(*IMMED) SPLFILE(*YES) C. ENDJOB(USERJOB1) OPTION(*IMMED) SPLFILE(*DLT) D. ENDJOB(USERJOB1) OPTION(*IMMED) SPLFILE(*ALL) Question: 119 An operator needs the daily balance job to process from the job queue ahead of the jobs in the queue before it. Which of the following parameters will accomplish this goal? Page 26 of 27

27 A. JOBPTY - Job priority B. RUNPTY - Run priority C. OUTPTY - Out priority D. DFTWAIT - Default Wait Time Question: 120 A user is unable to get a sign-on screen at a workstation. Which of the following actions will help an operator determine the source of the problem? A. Check to see if the QSYSWRK subsystem is active. B. Check the user profile to see if it has been disabled. C. Check the device configuration status to see if it is varied off. D. Check active jobs to see if the user is signed on to more than one device. End of Document Page 27 of 27