SALOME-CFD: EDF S REFERENCE PLATFORM FOR CFD STUDIES
|
|
|
- June Wilcox
- 10 years ago
- Views:
Transcription
1 SALOME-CFD: EDF S REFERENCE PLATFORM FOR CFD STUDIES Cyril BAUDRY SALOME S USER DAY 26 NOV NOVEMBRE 2015 CEA 26 NOV 2015 PAGE 1
2 SUMMARY 1. Why build a platform for CFD? 2. SALOME-CFD content and specificities 3. Some studies with SALOME 4. And tomorrow? 27 NOVEMBRE 2015 SALOME s User Day 26 NOV 2015 PAGE 2
3 WHY BUILD A PLATFORM FOR CFD? CEA 26 NOV 2015 PAGE 3 27 NOVEMBRE 2015
4 CONTEXT Some actions around SALOME at MFEE Test and use on industrial cases for CAD and MESHES Visualisation: remote and in situ viewing Internal promotion of SALOME (training, new hires, trainees, ) Education: use SALOME for CFD module (Ecole des Ponts ParisTech, ISUPFERE) First CFDSTUDY module Available since 2008, but built as a post install process 27 NOVEMBRE 2015 SALOME s User Day 26 NOV 2015 PAGE 4
5 CONTEXT Number of users increases Develop a workbench for studies Simplifying installation process Increase usability Optimize return time for studies Use other SALOME modules (ADAO, OPENTURNS, HOMARD, ) Remote viewing capability Multiscale and multiphysics coupling needs 27 NOVEMBRE 2015 SALOME s User Day 26 NOV 2015 PAGE 5
6 SALOME-CFD CONTENT AND SPECIFICITIES CEA 26 NOV 2015 PAGE 6 27 NOVEMBRE 2015
7 SALOME-CFD PLATFORM Specifities 2 platforms : Open source: Code_Saturne + SYRTHES Restricted: Code_Saturne + NEPTUNE_CFD + EOS (Equation Of State library) + SYRTHES Common content: GEOM, MESH, PARAVIS, MED, YACS, JOB MANAGER, PARAMETRIC, HOMARD, HEXABLOCK, OPENTURNS, ADAO 2 modes for each solver (CFD): optimize and debug Module CFD located on Code_Saturne for post install capabilities (SALOME-MECA) Build system based on YAMM 27 NOVEMBRE 2015 SALOME s User Day 26 NOV 2015 PAGE 7
8 SALOME-CFD PLATFORM Easy to build: just use YAMM Easy to install: just execute ".run" Direct access to PORTHOS cluster for visualization 27 NOVEMBRE 2015 SALOME s User Day 26 NOV 2015 PAGE 8
9 SALOME-CFD PLATFORM 27 NOVEMBRE 2015 SALOME s User Day 26 NOV 2015 PAGE 9
10 SOME STUDIES WITH SALOME CEA 26 NOV 2015 PAGE NOVEMBRE 2015
11 ATMOSPHERIC FLOWS provided by B. CARISIMO, CEREA Toulouse 2014 field campaigns 27 NOVEMBRE 2015 SALOME s User Day 26 NOV 2015 PAGE 11
12 ATMOSPHERIC FLOWS Toulouse Bordelongue (IGN): 27 NOVEMBRE 2015 SALOME s User Day 26 NOV 2015 PAGE 12
13 ATMOSPHERIC FLOWS Use Code_Saturne 27 NOVEMBRE 2015 SALOME s User Day 26 NOV 2015 PAGE 13
14 ATMOSPHERIC FLOWS tracer 27 NOVEMBRE 2015 SALOME s User Day 26 NOV 2015 PAGE 14
15 IN-VESSEL RETENTION WITH NEPTUNE_CFD Context: In-vessel retention (IVR) of molten corium, ULPU-V experiments Evaluate NEPTUNE_CFD capabilities with ULPU-V facility experiments M. Jamet, J. Lavieville, K. Atkhen, N. Mechitoua, Nuclear Engineering and Design 293 (2015) Schematics of the ULPU-2400 facility configuration V with the three baffle positions tested 27 NOVEMBRE 2015 SALOME s User Day 26 NOV 2015 PAGE 15
16 IN-VESSEL RETENTION WITH NEPTUNE_CFD Variation of void fraction in the fluid domain (NEPTUNE CFD), maximum heat flux. Computation domain used for mesh refinement sensitivity (made with SALOME) 27 NOVEMBRE 2015 SALOME s User Day 26 NOV 2015 PAGE 16
17 FUEL BUNDLE WITH NEPTUNE_CFD Simulate a fuel bundle (5x5) with NEPTUNE_CFD under accidental conditions Geometry, inputs and measurement points provided by OECD/NEA: PSBT benchmark based on NUPEC PWR subchannel and bundle tests, possibility to publish results Improve scalability and model capability on an industrial case 27 NOVEMBRE 2015 SALOME s User Day 26 NOV 2015 PAGE 17
18 FUEL BUNDLE WITH NEPTUNE_CFD Bundle geometry: 5x5 rods array 4 meters long 7 mixing vane spacers 2 non mixing vane spacers 8 simple spacers All meshes made with Salome 7.x TUI + GUI Meshes: mixing vane spacer: 19.2 million cells with MG tetra (GHS3D) non mixing vane spacer: 10.9 million cells with MG tetra (GHS3D) simple spacer: 4.8 million cells with MG tetra (GHS3D) extrusion for bundle for the bundle: 256 million cells test 680 millions and 17x17 mesh 27 NOVEMBRE 2015 SALOME s User Day 26 NOV 2015 PAGE 18
19 FUEL BUNDLE WITH NEPTUNE_CFD 27 NOVEMBRE 2015 SALOME s User Day 26 NOV 2015 PAGE 19
20 FUEL BUNDLE WITH NEPTUNE_CFD 27 NOVEMBRE 2015 SALOME s User Day 26 NOV 2015 PAGE 20
21 FUEL BUNDLE WITH NEPTUNE_CFD 27 NOVEMBRE 2015 SALOME s User Day 26 NOV 2015 PAGE 21
22 FUEL BUNDLE WITH NEPTUNE_CFD 27 NOVEMBRE 2015 SALOME s User Day 26 NOV 2015 PAGE 22
23 GROUNDWATER FLOWS Vincent STOBIAC presentation 27 NOVEMBRE 2015 SALOME s User Day 26 NOV 2015 PAGE 23
24 AND TOMORROW? CEA 26 NOV 2015 PAGE NOVEMBRE 2015
25 SHORT AND LONG TERMS GOALS Improved user experience Short term objectives: Make all capabilities available in graphical mode (debug, coupling study, ) Simplify the use of CFD with Catalyst (in-situ visualization) Increase number of tutorials (text and movies) Medium term objectives: Increase links with other modules (ADAO, OPENTURNS, HOMARD, ) Build version with Code_Aster and CFD module Long term objectives Windows version 27 NOVEMBRE 2015 SALOME s User Day 26 NOV 2015 PAGE 25
26 Thanks for your attention PAGE 26 CEA 26 NOV 2015 Direction Département Service 27 NOVEMBRE 2015
salome-platform.org SALOME7 THE OPEN SOURCE INTEGRATION PLATFORM FOR NUMERICAL SIMULATION
salome-platform.org SALOME7 THE OPEN SOURCE INTEGRATION PLATFORM FOR NUMERICAL SIMULATION SALOME7 PLATFORM The SALOME software platform is an open framework that can integrate scientific solvers for modelling
2013 Code_Saturne User Group Meeting. EDF R&D Chatou, France. 9 th April 2013
2013 Code_Saturne User Group Meeting EDF R&D Chatou, France 9 th April 2013 Thermal Comfort in Train Passenger Cars Contact For further information please contact: Brian ANGEL Director RENUDA France [email protected]
LSCFD: Meshing Tools for Open Source CFD A Practical Point of View
LSCFD: Meshing Tools for Open Source CFD A Practical Point of View Juha Kortelainen Report: Meshing Tools for Open Source CFD A Practical Point of View LSCFD Tools for Large Scale
Qualification of Thermal hydraulic codes within NURESIM D. Bestion (CEA, France)
Qualification of Thermal hydraulic codes within NURESIM D. Bestion (CEA, France) The thermalhydraulic codes used for nuclear safety applications Validation and Verification of codes Validation of system
salome-platform.org SALOME6
salome-platform.org SALOME6 THE OPEN SOURCE INTEGRATION PLATFORM FOR NUMERICAL SIMULATION Over the last decade, the improvements in computer hardware and software have brought significant changes in the
Laminar Flow in a Baffled Stirred Mixer
Laminar Flow in a Baffled Stirred Mixer Introduction This exercise exemplifies the use of the rotating machinery feature in the CFD Module. The Rotating Machinery interface allows you to model moving rotating
BBIPED: BCAM-Baltogar Industrial Platform for Engineering design
BBIPED: BCAM-Baltogar Industrial Platform for Engineering design Carmen Alonso-Montes, Imanol García, Ali Ramezani, Lakhdar Remaki BCAM Basque Center for Applied Mathematics (Bilbao), Spain Motivation
NURESAFE EUROPEAN PROJECT Second General Seminar
NURESAFE EUROPEAN PROJECT Second General Seminar Brussels, Belgium November 4-5, 2015 Announcement and Proposed Program Background and Purpose of the Meeting The NURESAFE European project aims at delivering
version 3.0 tutorial - Turbulent mixing in a T-junction with CFDSTUDY in SALOME contact: [email protected]
EDF R&D Fluid Dynamics, Power Generation and Environment Department Single Phase Thermal-Hydraulics Group 6, quai Watier F-78401 Chatou Cedex Tel: 33 1 30 87 75 40 Fax: 33 1 30 87 79 16 MAY 2013 documentation
Express Introductory Training in ANSYS Fluent Lecture 1 Introduction to the CFD Methodology
Express Introductory Training in ANSYS Fluent Lecture 1 Introduction to the CFD Methodology Dimitrios Sofialidis Technical Manager, SimTec Ltd. Mechanical Engineer, PhD PRACE Autumn School 2013 - Industry
Overview on Salome-Meca and Code_Aster. Code_Aster, Salome-Meca course material GNU FDL licence (http://www.gnu.org/copyleft/fdl.
Overview on Salome-Meca and Code_Aster Code_Aster, Salome-Meca course material GNU FDL licence (http://www.gnu.org/copyleft/fdl.html) Outline General principles of code and platform Presentation of Code_Aster
ME6130 An introduction to CFD 1-1
ME6130 An introduction to CFD 1-1 What is CFD? Computational fluid dynamics (CFD) is the science of predicting fluid flow, heat and mass transfer, chemical reactions, and related phenomena by solving numerically
OpenFOAM simulations of the Turbulent Flow in a Rod Bundle with Mixing Vanes
OpenFOAM simulations of the Turbulent Flow in a Rod Bundle with Mixing Vanes ABSTRACT Blaž Mikuž Reactor Engineering Division, Jozef Stefan Institute, Jamova cesta 39 SI-1000 Ljubljana, Slovenia [email protected]
Customer Training Material. Lecture 2. Introduction to. Methodology ANSYS FLUENT. ANSYS, Inc. Proprietary 2010 ANSYS, Inc. All rights reserved.
Lecture 2 Introduction to CFD Methodology Introduction to ANSYS FLUENT L2-1 What is CFD? Computational Fluid Dynamics (CFD) is the science of predicting fluid flow, heat and mass transfer, chemical reactions,
CFD SIMULATION OF IPR-R1 TRIGA SUBCHANNELS FLUID FLOW
2013 International Nuclear Atlantic Conference - INAC 2013 Recife, PE, Brazil, November 24-29, 2013 ASSOCIAÇÃO BRASILEIRA DE ENERGIA NUCLEAR - ABEN ISBN: 978-85-99141-05-2 CFD SIMULATION OF IPR-R1 TRIGA
Open Source CFD Solver - OpenFOAM
Open Source CFD Solver - OpenFOAM Wang Junhong (HPC, Computer Centre) 1. INTRODUCTION The OpenFOAM (Open Field Operation and Manipulation) Computational Fluid Dynamics (CFD) Toolbox is a free, open source
Multiphase Flow - Appendices
Discovery Laboratory Multiphase Flow - Appendices 1. Creating a Mesh 1.1. What is a geometry? The geometry used in a CFD simulation defines the problem domain and boundaries; it is the area (2D) or volume
CAD Import Module and LiveLink for CAD V4.3a
CAD Import Module and LiveLink for CAD V4.3a LiveLink for AutoCAD, LiveLink for Creo Parametric, LiveLink for Inventor, LiveLink for Pro/ENGINEER, LiveLink for Solid Edge, LiveLink for SolidWorks, LiveLink
PUTTING THE SPIN IN CFD
W H I T E PA P E R PUTTING THE SPIN IN CFD Overview Engineers who design equipment with rotating components need to analyze and understand the behavior of those components if they want to improve performance.
Automated moving mesh techniques in CFD
Unione Europea Repubblica Italiana Regione Autonoma della Sardegna Automated moving mesh techniques in CFD Application to fluid-structure interactions and rigid motions problems MANUELA PROFIR [email protected]
Thermal Simulation of a Power Electronics Cold Plate with a Parametric Design Study
EVS28 KINTEX, Korea, May 3-6, 2015 Thermal Simulation of a Power Electronics Cold Plate with a Parametric Design Study Boris Marovic Mentor Graphics (Deutschland) GmbH, Germany, [email protected]
CCTech TM. ICEM-CFD & FLUENT Software Training. Course Brochure. Simulation is The Future
. CCTech TM Simulation is The Future ICEM-CFD & FLUENT Software Training Course Brochure About. CCTech Established in 2006 by alumni of IIT Bombay. Our motive is to establish a knowledge centric organization
CastNet: Modelling platform for open source solver technology
CastNet: Modelling platform for open source solver technology. DHCAE Tools GmbH Address: Friedrich-Ebert-Str. 368, 47800 Krefeld, Germany / Company site: Alte Rather Str. 207 / 47802 Krefeld Phone +49
CFD Code Validation Against Stratified Air-Water Flow Experimental Data
CFD Code Validation Against Stratified Air-Water Flow F. Terzuoli, M.C. Galassi, D. Mazzini, F. D Auria University of Pisa Department of Mechanics, Nuclear and Production Engineering Via Diotisalvi 2,
Adaptation and validation of OpenFOAM CFD-solvers for nuclear safety related flow simulations
Adaptation and validation of OpenFOAM CFD-solvers for nuclear safety related flow simulations SAFIR2010 Seminar, 10.-11.3.2011, Espoo Juho Peltola, Timo Pättikangas (VTT) Tomas Brockmann, Timo Siikonen
Code_Saturne 2.0. Code_Saturne development team. Code_Saturne User meeting 7 th and 8 th, December 2009
Code_Saturne 2.0 Code_Saturne development team Code_Saturne User meeting 7 th and 8 th, December 2009 Outlines 1. Enhancements and new features 2. Perspectives 3. Open source initiative 7th and 8th, December
ADVANCED COMPUTATIONAL TOOLS FOR EDUCATION IN CHEMICAL AND BIOMEDICAL ENGINEERING ANALYSIS
ADVANCED COMPUTATIONAL TOOLS FOR EDUCATION IN CHEMICAL AND BIOMEDICAL ENGINEERING ANALYSIS Proposal for the FSU Student Technology Fee Proposal Program Submitted by Department of Chemical and Biomedical
Tutorials from CAD through CFD for Beginners
Tutorials from CAD through CFD for Beginners John M. Cimbala, Professor Keith A. Martin, Graduate student Scott A. Richards, Graduate student Department of Mechanical and Nuclear Engineering, The Pennsylvania
Very special thanks to Wolfgang Gentzsch and Burak Yenier for making the UberCloud HPC Experiment possible.
Digital manufacturing technology and convenient access to High Performance Computing (HPC) in industry R&D are essential to increase the quality of our products and the competitiveness of our companies.
Simulation of Fluid-Structure Interactions in Aeronautical Applications
Simulation of Fluid-Structure Interactions in Aeronautical Applications Martin Kuntz Jorge Carregal Ferreira ANSYS Germany D-83624 Otterfing [email protected] December 2003 3 rd FENET Annual Industry
Technology Update: Workbench, Geometry, Meshing, Workflow. ANSYS Users Group Meeting Prague, 2011
Technology Update: Workbench, Geometry, Meshing, Workflow ANSYS Users Group Meeting Prague, 2011 1 Andreas Kolms Hannover 2 Agenda Workbench Geometry Meshing Workflow 3 The Path to Robust Design Optimization
Training Courses 2011
Training Courses 2011 EDF Research & Development Technology Transfer Institute (ITech) EDF Research & Development invites you to discover its training programme for 2011. The role of the Institute of Technology
CFD software overview comparison, limitations and user interfaces
CFD software overview comparison, limitations and user interfaces Daniel Legendre Introduction to CFD Turku, 05.05.2015 Åbo Akademi University Thermal and Flow Engineering Laboratory 05.05.2015 1 Some
Model of a flow in intersecting microchannels. Denis Semyonov
Model of a flow in intersecting microchannels Denis Semyonov LUT 2012 Content Objectives Motivation Model implementation Simulation Results Conclusion Objectives A flow and a reaction model is required
Christof Hinterberger, Mark Olesen
Application of of a Continuous Adjoint Flow Solver for for Geometry Optimisation of of Automotive Exhaust Systems Christof Hinterberger, Mark Olesen FLOWHEAD Workshop, Varna Sept. 2010 Workshop on industrial
FINE TM /Marine. CFD Suite for Marine Applications. Advanced Development for Better Products. www.numeca.com
FINE TM /Marine CFD Suite for Marine Applications Advanced Development for Better Products www.numeca.com FINE TM /Marine FINE /Marine is a unique integrated CFD software environment for the simulation
SGI HPC Systems Help Fuel Manufacturing Rebirth
SGI HPC Systems Help Fuel Manufacturing Rebirth Created by T A B L E O F C O N T E N T S 1.0 Introduction 1 2.0 Ongoing Challenges 1 3.0 Meeting the Challenge 2 4.0 SGI Solution Environment and CAE Applications
Automatic HVAC Workflow with STAR-CCM+
CD-adapco STAR European Conference 2011 Automatic HVAC Workflow with STAR-CCM+ Georgios Apostolopoulos, Dr. Christian Merkle, Dr. Wolfram Kühnel Behr GmbH & Co. KG, Germany Automatic HVAC Workflow with
Flow distribution and turbulent heat transfer in a hexagonal rod bundle experiment
Flow distribution and turbulent heat transfer in a hexagonal rod bundle experiment K. Litfin, A. Batta, A. G. Class,T. Wetzel, R. Stieglitz Karlsruhe Institute of Technology Institute for Nuclear and Energy
SCDAP/RELAP5-3D : A State-of-the-Art Tool for Severe Accident Analyses
SCDAP/RELAP5-3D : A State-of-the-Art Tool for Severe Accident Analyses D. L. Knudson and J. L. Rempe 2002 RELAP5 International Users Seminar Park City, Utah, USA September 4-6, 2002 Objective and Outline
CONVERGE Features, Capabilities and Applications
CONVERGE Features, Capabilities and Applications CONVERGE CONVERGE The industry leading CFD code for complex geometries with moving boundaries. Start using CONVERGE and never make a CFD mesh again. CONVERGE
CFD Analysis of a MILD Low-Nox Burner for the Oil and Gas industry
CFD Analysis of a MILD Low-Nox Burner for the Oil and Gas industry Alessandro Atzori Supervised by: Vincent Moreau Framework: Industria 2015 Bill on competitiveness and industrial policy, approved on 22
Application of CFD Simulation in the Design of a Parabolic Winglet on NACA 2412
, July 2-4, 2014, London, U.K. Application of CFD Simulation in the Design of a Parabolic Winglet on NACA 2412 Arvind Prabhakar, Ayush Ohri Abstract Winglets are angled extensions or vertical projections
FEAWEB ASP Issue: 1.0 Stakeholder Needs Issue Date: 03/29/2000. 04/07/2000 1.0 Initial Description Marco Bittencourt
)($:(%$63 6WDNHKROGHU1HHGV,VVXH 5HYLVLRQ+LVWRU\ 'DWH,VVXH 'HVFULSWLRQ $XWKRU 04/07/2000 1.0 Initial Description Marco Bittencourt &RQILGHQWLDO DPM-FEM-UNICAMP, 2000 Page 2 7DEOHRI&RQWHQWV 1. Objectives
The Value of High-Performance Computing for Simulation
White Paper The Value of High-Performance Computing for Simulation High-performance computing (HPC) is an enormous part of the present and future of engineering simulation. HPC allows best-in-class companies
Collaborative modelling and concurrent scientific data analysis:
Collaborative modelling and concurrent scientific data analysis: Application case in space plasma environment with the Keridwen/SPIS- GEO Integrated Modelling Environment B. Thiebault 1, J. Forest 2, B.
Enterprise HPC & Cloud Computing for Engineering Simulation. Barbara Hutchings Director, Strategic Partnerships ANSYS, Inc.
Enterprise HPC & Cloud Computing for Engineering Simulation Barbara Hutchings Director, Strategic Partnerships ANSYS, Inc. Historical Perspective Evolution of Computing for Simulation Pendulum swing: Centralized
Atmospheric CFD modelling for environmental applications at local scale
Atmospheric CFD modelling for environmental applications at local scale B. Carissimo, S. Lacour, H. Foudhil, L. Musson-Genon, E. Dupont, D. Wendum, M. Milliez, B. Albriet, E. Demael, L. Laporte, Outline
Titelmasterformat durch Klicken bearbeiten
Titelmasterformat durch Klicken bearbeiten ANSYS AIM Product simulation for every engineer Erke Wang CADFEM GmbH Georg Scheuerer ANSYS Germany GmbH Christof Gebhardt CADFEM GmbH All products involve multiple
O.F.Wind Wind Site Assessment Simulation in complex terrain based on OpenFOAM. Darmstadt, 27.06.2012
O.F.Wind Wind Site Assessment Simulation in complex terrain based on OpenFOAM Darmstadt, 27.06.2012 Michael Ehlen IB Fischer CFD+engineering GmbH Lipowskystr. 12 81373 München Tel. 089/74118743 Fax 089/74118749
Introduction. 1.1 Motivation. Chapter 1
Chapter 1 Introduction The automotive, aerospace and building sectors have traditionally used simulation programs to improve their products or services, focusing their computations in a few major physical
CastNet: GUI environment for OpenFOAM
CastNet: GUI environment for OpenFOAM CastNet is a preprocessing system and job-control system for OpenFOAM. CastNet works with the standard OpenFOAM releases provided by ESI Group as well as ports for
Module 6 Case Studies
Module 6 Case Studies 1 Lecture 6.1 A CFD Code for Turbomachinery Flows 2 Development of a CFD Code The lecture material in the previous Modules help the student to understand the domain knowledge required
Introduction to ANSYS
Lecture 3 Introduction to ANSYS Meshing 14. 5 Release Introduction to ANSYS Meshing 2012 ANSYS, Inc. March 27, 2014 1 Release 14.5 Introduction to ANSYS Meshing What you will learn from this presentation
HPC Deployment of OpenFOAM in an Industrial Setting
HPC Deployment of OpenFOAM in an Industrial Setting Hrvoje Jasak [email protected] Wikki Ltd, United Kingdom PRACE Seminar: Industrial Usage of HPC Stockholm, Sweden, 28-29 March 2011 HPC Deployment
Research Article Validation of NEPTUNE-CFD Two-Phase Flow Models Using Experimental Data
Science and Technology of Nuclear Installations, Article ID 185950, 19 pages http://dx.doi.org/10.1155/2014/185950 Research Article Validation of NEPTUNE-CFD Two-Phase Flow Models Using Experimental Data
Computational Fluid Dynamics Research Projects at Cenaero (2011)
Computational Fluid Dynamics Research Projects at Cenaero (2011) Cenaero (www.cenaero.be) is an applied research center focused on the development of advanced simulation technologies for aeronautics. Located
CFD simulation of fibre material transport in a PWR core under loss of coolant conditions
CFD simulation of fibre material transport in a PWR core under loss of coolant conditions T. Höhne, A. Grahn, S. Kliem Forschungszentrum Dresden- Rossendorf (FZD) Institut für Sicherheitsforschung Postfach
Science Intensive Development (SID)
Science Intensive Development (SID) At, we develop custom software that requires specific scientific knowledge. We are experienced in realizing projects that had been considered impossible. The main guarantee
OMD 2 platform dedicated to HPC Optimisation
OMD 2 platform dedicated to HPC Optimisation ScilabTEC 2011 École Polytechnique ACKNOWLEDGMENT: This work has been supported by French National Research Agency (ANR) through COSINUS program (project OMD
CFturbo Modern turbomachinery design software
COMPRESSOR Tech Magazine CFturbo Modern turbomachinery design software Designing new compressors from scratch and compressor redesign By Ralph-Peter Mueller & Gero Kreuzfeld Ralph-Peter Mueller and Gero
POLITECNICO DI MILANO Department of Energy
1D-3D coupling between GT-Power and OpenFOAM for cylinder and duct system domains G. Montenegro, A. Onorati, M. Zanardi, M. Awasthi +, J. Silvestri + ( ) Dipartimento di Energia - Politecnico di Milano
CFD: What is it good for?
CFD: What is it good for? Tom O Mahoney TNO Fluid Dynamics Introduction to CFD CFD - Computational Fluid Dynamics Computational the using of computers to simulate the physics of fluids Fluid Either gas
FASTEMS SOFTWARE. For maximum Performance
FASTEMS SOFTWARE For maximum Performance Tailored solutions for each process Order Based Systems Volume Based Lines Operator Based Cells Starting point: Customer s process Number of Machines: 1 2 Process
Aeroelastic Investigation of the Sandia 100m Blade Using Computational Fluid Dynamics
Aeroelastic Investigation of the Sandia 100m Blade Using Computational Fluid Dynamics David Corson Altair Engineering, Inc. Todd Griffith Sandia National Laboratories Tom Ashwill (Retired) Sandia National
. Space-time Analysis code for AHWR
1.2 ADVANCED COMPUTATIONAL TOOLS FOR PHYSICS DESIGN. Space-time Analysis code for AHWR The knowledge of the space and time dependent behaviour of the neutron flux is important for the reactor safety analysis
Advanced discretisation techniques (a collection of first and second order schemes); Innovative algorithms and robust solvers for fast convergence.
New generation CFD Software APUS-CFD APUS-CFD is a fully interactive Arbitrary Polyhedral Unstructured Solver. APUS-CFD is a new generation of CFD software for modelling fluid flow and heat transfer in
Marine CFD applications using OpenFOAM
Marine CFD applications using OpenFOAM Andrea Penza, CINECA 27/03/2014 Contents Background at CINECA: LRC experience CFD skills Automatic workflow Reliability workflow OpenFOAM solvers for marine CFD analysis
Introduction to CFD Analysis
Introduction to CFD Analysis Introductory FLUENT Training 2006 ANSYS, Inc. All rights reserved. 2006 ANSYS, Inc. All rights reserved. 2-2 What is CFD? Computational fluid dynamics (CFD) is the science
SOLIDWORKS CAD Software Training Catalog COURSES FOCUS ON FUNDAMENTAL SKILLS AND CONCEPTS KEY TO INSURING SUCCESS
SOLIDWORKS CAD Software Training Catalog COURSES FOCUS ON FUNDAMENTAL SKILLS AND CONCEPTS KEY TO INSURING SUCCESS SOLIDWORKS CAD Software Course Index Course Number Course Title Course Length 100 SOLIDWORKS
COMPUTATIONAL FLUID DYNAMICS USING COMMERCIAL CFD CODES
ME469B - Spring 2007 COMPUTATIONAL FLUID DYNAMICS USING COMMERCIAL CFD CODES Gianluca Iaccarino Dept. Mechanical Engineering Bldg. 500 RM 204 (RM500-I) Ph. 650-723-9599 Email: [email protected] ME469B/1/GI
CFD SIMULATION OF NATURAL GAS COMBUSTION AND IST APPLICATION TO TUNNEL KILN FIRING
CFD SIMULATION OF NATURAL GAS COMBUSTION AND IST APPLICATION TO TUNNEL KILN FIRING. R. Obenaus-Emler University of Leoben Contents 1. Intoduction to combustion models in OpenFOAM 2. The Flamelet-Model
Introduction to CFD Analysis
Introduction to CFD Analysis 2-1 What is CFD? Computational Fluid Dynamics (CFD) is the science of predicting fluid flow, heat and mass transfer, chemical reactions, and related phenomena by solving numerically
Quality and Reliability in CFD
Quality and Reliability in CFD Open Source Challenges Hrvoje Jasak Wikki Ltd, United Kingdom Faculty of Mechanical Engineering and Naval Architecture University of Zagreb, Croatia Quality and Reliability
Steady Flow: Laminar and Turbulent in an S-Bend
STAR-CCM+ User Guide 6663 Steady Flow: Laminar and Turbulent in an S-Bend This tutorial demonstrates the flow of an incompressible gas through an s-bend of constant diameter (2 cm), for both laminar and
THE OECD/NEA MATIS-H BENCHMARK CFD ANALYSIS OF WATER FLOW THROUGH A 5X5 ROD BUNDLE WITH SPACER GRIDS USING ANSYS FLUENT AND ANSYS CFX
CFD4NRS-4, Conference on Experimental Validation and Application of CFD and CMFD Codes in Nuclear Reactor Technology, OECD/NEA and IAEA Workshop, 10.-12. September 2012, Daejeon, South Korea. THE OECD/NEA
OMIQ srl. Advanced Post-Processing of Flow3D Calculations using Ensight. Federico Monterosso. Ingegneria di componenti e sistemi industriali
OMIQ srl Ingegneria di componenti e sistemi industriali Advanced Post-Processing of Flow3D Calculations using Ensight Federico Monterosso Agenda A brief introduction of OMIQ A not-so-brief introduction
Learning Module 4 - Thermal Fluid Analysis Note: LM4 is still in progress. This version contains only 3 tutorials.
Learning Module 4 - Thermal Fluid Analysis Note: LM4 is still in progress. This version contains only 3 tutorials. Attachment C1. SolidWorks-Specific FEM Tutorial 1... 2 Attachment C2. SolidWorks-Specific
Very special thanks to Wolfgang Gentzsch and Burak Yenier for making the UberCloud HPC Experiment possible.
Digital manufacturing technology and convenient access to High Performance Computing (HPC) in industry R&D are essential to increase the quality of our products and the competitiveness of our companies.
2.1 CFD PROJECT PLANNING. 2006 ANSYS, Inc. All rights reserved. ANSYS, Inc. Proprietary
2.1 CFD PROJECT PLANNING 2006 ANSYS, Inc. All rights reserved. 2008 ANSYS, Inc. All rights reserved. 6-2 CFD PROJECT PLANNING Task definition Resources Timing and deliverables Design review Assumed part
Development of Specialized Modelling Tools for Crystal Growth Processes
International Scientific Colloquium Modelling for Material Processing Riga, June 8-9, 2006 Development of Specialized Modelling Tools for Crystal Growth Processes A. Rudevics, A. Muiznieks, B. Nacke, V.
Eu-NORSEWInD - Assessment of Viability of Open Source CFD Code for the Wind Industry
Downloaded from orbit.dtu.dk on: Jun 28, 2016 Eu-NORSEWInD - Assessment of Viability of Open Source CFD Code for the Wind Industry Stickland, Matt; Scanlon, Tom; Fabre, Sylvie; Ahmad, Abdul; Oldroyd, Andrew;
The influence of mesh characteristics on OpenFOAM simulations of the DrivAer model
The influence of mesh characteristics on OpenFOAM simulations of the DrivAer model Vangelis Skaperdas, Aristotelis Iordanidis, Grigoris Fotiadis BETA CAE Systems S.A. 2 nd Northern Germany OpenFOAM User
Cluster Scalability of ANSYS FLUENT 12 for a Large Aerodynamics Case on the Darwin Supercomputer
Cluster Scalability of ANSYS FLUENT 12 for a Large Aerodynamics Case on the Darwin Supercomputer Stan Posey, MSc and Bill Loewe, PhD Panasas Inc., Fremont, CA, USA Paul Calleja, PhD University of Cambridge,
Finite Element Modules for Enhancing Undergraduate Transport Courses: Application to Fuel Cell Fundamentals
Finite Element Modules for Enhancing Undergraduate Transport Courses: Application to Fuel Cell Fundamentals Originally published in 2007 American Society for Engineering Education Conference Proceedings
Essay 5 Tutorial for a Three-Dimensional Heat Conduction Problem Using ANSYS Workbench
Essay 5 Tutorial for a Three-Dimensional Heat Conduction Problem Using ANSYS Workbench 5.1 Introduction The problem selected to illustrate the use of ANSYS software for a three-dimensional steadystate
Computational Fluid Dynamics in Automotive Applications
Computational Fluid Dynamics in Automotive Applications Hrvoje Jasak [email protected] Wikki Ltd, United Kingdom FSB, University of Zagreb, Croatia 1/15 Outline Objective Review the adoption of Computational
DEVELOPMENT OF A DYNAMIC SIMULATION MODE IN SERPENT 2 MONTE CARLO CODE
International Conference on Mathematics and Computational Methods Applied to Nuclear Science & Engineering (M&C 2013) Sun Valley, Idaho, USA, May 5-9, 2013, on CD-ROM, American Nuclear Society, LaGrange
HPC technology and future architecture
HPC technology and future architecture Visual Analysis for Extremely Large-Scale Scientific Computing KGT2 Internal Meeting INRIA France Benoit Lange [email protected] Toàn Nguyên [email protected]
HPC enabling of OpenFOAM R for CFD applications
HPC enabling of OpenFOAM R for CFD applications Towards the exascale: OpenFOAM perspective Ivan Spisso 25-27 March 2015, Casalecchio di Reno, BOLOGNA. SuperComputing Applications and Innovation Department,
Overset Grids Technology in STAR-CCM+: Methodology and Applications
Overset Grids Technology in STAR-CCM+: Methodology and Applications Eberhard Schreck, Milovan Perić and Deryl Snyder [email protected] [email protected] [email protected]
Tutorial 1. Introduction to Using ANSYS FLUENT in ANSYS Workbench: Fluid Flow and Heat Transfer in a Mixing Elbow
Tutorial 1. Introduction to Using ANSYS FLUENT in ANSYS Workbench: Fluid Flow and Heat Transfer in a Mixing Elbow Introduction This tutorial illustrates using ANSYS Workbench to set up and solve a three-dimensional
THE CFD SIMULATION OF THE FLOW AROUND THE AIRCRAFT USING OPENFOAM AND ANSA
THE CFD SIMULATION OF THE FLOW AROUND THE AIRCRAFT USING OPENFOAM AND ANSA Adam Kosík Evektor s.r.o., Czech Republic KEYWORDS CFD simulation, mesh generation, OpenFOAM, ANSA ABSTRACT In this paper we describe
How is EnSight Uniquely Suited to FLOW-3D Data?
How is EnSight Uniquely Suited to FLOW-3D Data? July 5, 2011 figure 1. FLOW-3D model of Dam visualized with EnSight If you would like to know how CEI s EnSight offers you more power than other postprocessors
An introduction to Code_Aster. Daniele Colombo An introduction to Code_Aster
An introduction to Code_Aster Goals and basic knowledge Goals of this short course: give you basic knowledge on how Code_Aster works give you an overview on how you can use Code_Aster with the pre/post
CASL: Consortium for the Advanced Simulation of Light Water Reactors: Program Update
Consortium for Advanced Simulation of LWRs CASL: Consortium for the Advanced Simulation of Light Water Reactors: Program Update Douglas B. Kothe Oak Ridge National Laboratory February 6, 2015 CASL: Consortium
Olivier Gicquel, Ronan Vicquelin, Jean Taine Phd Students : Y. Zhang, J. Kim, G. Wang, R. Goncalves dos Santos
Développement d un code Monte- Carlo pour le calcul intensif utilisant les spécificités de la méthode ERM Olivier Gicquel, Ronan Vicquelin, Jean Taine Phd Students : Y. Zhang, J. Kim, G. Wang, R. Goncalves
FLUX / GOT-It Finite Element Analysis of electromagnetic devices Maccon GmbH
FLUX / GOT-It Finite Element Analysis of electromagnetic devices Maccon GmbH Entwurfswerkzeuge für elektrische Maschinen MACCON GmbH 09/04/2013 1 Flux software Modeling electromagnetic and thermal phenomena
FreeFem++-cs, the FreeFem++ Graphical Interface
FreeFem++-cs, the FreeFem++ Graphical Interface Antoine Le Hyaric Laboratoire Jacques-Louis Lions Université Pierre et Marie Curie Antoine.Le [email protected] December 10, 2014 1 / 54 FreeFem++-cs How to
Curriculum Vitae Dr.-Ing. Víctor Hugo Sánchez Espinoza
Curriculum Vitae Dr.-Ing. Víctor Hugo Sánchez Espinoza A Personal Data Family and first name Sanchez Espinoza, Victor Hugo Date of birth 01.04.1960 Place of birth Agua Blanca in Cajamarca, Perú Nationality