17, 18, 19 May 2011 Stuttgart Messe, Stuttgart, Germany
|
|
|
- Osborn Golden
- 10 years ago
- Views:
Transcription
1 Europe s leading automotive testing, evaluation and quality engineering trade fair Free-to-attend forum 17, 18, 19 May 2011 Stuttgart Messe, Stuttgart, Germany Avoid the queues - register FREE now!
2 17, 18, 19 May 2011 Stuttgart Messe, Stuttgart, Germany Automotive Testing Expo Europe is the leading event dedicated to the quality, safety, reliability and durability of vehicles throughout Europe. The show will continue to be THE launch pad in Europe for new technologies within the area of automotive test, evaluation and quality engineering. The Expo that helps car makers improve quality and reduce recalls!
3 Automotive Testing Expo Europe 2011 covers all aspects of testing, evaluation and quality engineering equipment, systems and technologies: Test simulation NVH analysis Occupant/pedestrian safety Engine/emissions testing Track simulation and laboratory testing Dynamometers Vehicle dynamics testing Materials testing Aerodynamic and wind tunnel testing Vibration and shock testing Acoustic testing Environmental testing Mechanical testing Hydraulics testing Electrical system testing Reliability/lifecycle testing Test facility Automated test equipment (ATE) Fuels and integrated systems testing Test management software Crash test analysis Tyre testing Data acquisition and signal analysis Impact testing Electronics and microelectronics testing Fatigue/fracture testing Torsion testing Component testing EMC/electrical interference testing Structural and fatigue testing Impact and crash testing Sensors and transducers Test facility design Quality testing and inspection Telemetry systems Vehicle simulation Automatic inspection Stress/strain testing Calibration Laboratory instrumentation Software test and development Quality management solutions ASAM will once again jointly host the Open Technology Forum at Automotive Testing Expo Europe 2011 Building on the success of previous ASAM participation, the organisers of Automotive Testing Expo Europe will join forces with ASAM (Association for Standardisation of Automation and Measuring Systems) to put together a three-day Open Technology Forum with presentations from leading OEMs and Tier 1 and 2 suppliers. The Open Technology Forum is free of charge to attend, and will run on 17, 18 and 19 May The full programme will be available shortly. For more information please visit or contact Dorothee Bassermann at [email protected]
4 Tuesday 17 MAY Test Automation in Real and Simulated Environments 10:15 Intelligent test-case generation and automation for realtime test systems Dr Mugur Tatar, QTronic GmbH 10:40 Rapid measurement and calibration based on fast ECU access with ilinkrt Mihael Vuksic, product manager, AVL List GmbH 11:05 One common test language for domain experts and test engineers cost-effective creation and reuse of test sequences with Vector s Test Automation Editor Friederike Gengenbach, software development engineer, Vector Informatik GmbH 11:30 CCP and XCP with NI LabVIEW and NI VeriStand Andreas Stark, systems engineer, National Instruments Engineering GmbH & Co KG 11:55 Model-based black box testing and its standardisation layers Anthony Faucogney, business development manager, All4Tec 12:20 Testing the charging of electrical vehicles according to the standard IEC Jochen Thym, owner, time4e Simulation / Hardware in the Loop 12:45 Virtual integration and test of automotive ECUs Dr Jakob Mauss, QTronic GmbH 13:05 SAR line method: a new method for squeak and rattle simulation and test developed at Saab Jens Weber, CAE development engineer, Saab Automobile AB Vehicle Diagnostics in Development, Production and Service 13:35 Sustainability of automotive diagnosis over the lifecycle: synergies of integrated and standards-based diagnosis Toni Viscido, head of Business Development, DSA - Daten- und Systemtechnik Aachen GmbH 14:00 Use of OTX in the after-sales area Ralf Ramrath, senior programme manager - Diagnostics, In2Soft GmbH 14:25 Diagnostics as a service Andreas Hege, COO, RA Consulting 14:50 Integration of MVCI/ODX-based development tester in revised process chain by OEM Frank Oswald, key account manager, Softing Automotive Electronics GmbH 15:15 Taking the standard promise seriously: a generic ASAM integration layer Daniel Krippner, Teradyne Diagnostic Solutions 15:40 Comparison of OBD Scan-Tool diagnostics based on SAE J1979, SAE J1939 and ISO/PAS Peter Stoss, head of Automotive Division, RA Consulting GmbH 16:05 OTX: controlling complex diagnostic sequences Tobias Widmer, director, Emotive GmbH Visit the website for latest updates:
5 16:30 Erhöhung der Effiienz der Fahrzeuginbetriebnahme in der Endmontage durch Verwendung der Fahrzeugaktorik und -sensorik Christian Janßen, scientific researcher, WZL of RWTH - Chair of Assembly Systems Wednesday 18 MAY Measurement, Calibration and Test Data Acquisition 10:15 Driving the future: combustion engines, torsional vibration and measurement systems Andreas Braun, R&D manager Measurement & Calibration Systems, AFT Atlas Fahrzeugtechnik GmbH 10:40 EURO VI and US Tier 4: a big challenge for all IC engine developers Michael Mühlögger, global business unit manager, AVL List GmbH 11:05 How to accurately measure and analyse torsional vibrations and transmission errors Laurent Britte, product manager, LMS International 11:30 Validating electronic systems in the vehicle Joern-Ole Godbersen, ETAS GmbH 11:55 Robust measurement of the air mass flow through a cooling package Dr Bernhard Lechner, team leader Testing & Validation, The Virtual Vehicle Competence Center, Magna Steyr 12:20 Berührungsloses Messverfahren für den Reifendruck Rainer Müller, professor, WZL of RWTH Aachen - Chair of Assembly Systems 12:45 Calibration of fuel consumption measurement devices Dr Michael Wiesinger/Rainer Schantl, head of Development, AVL List GmbH Register now for your free entry pass:
6 Test Data Management, Calibration Data Management 13:10 Data quality: the key element for efficient data storage Andreas Haub, managing director, National Instruments Engineering GmbH & Co KG 13:35 Field report of 15 years ASAM ODS test field installations Gerald Sammer, global product manager, AVL 14:00 One data store: individual perspectives Stefan Romainczyk, group manager NI Engineering - R&D, National Instruments Germany GmbH 14:25 Sustainable ASAM ODS conform data generation and management in openmdm for efficient workflows in the field of NVH Lars Fiedler, Müller-BBM VibroAkustik Systeme GmbH/ Stefan Beese, EPOS CAT GmbH 14:50 ASAM transport format in XML (ATFX): overview and best practices Peter Stoll, product manager, Science + Computing AG 15:15 ASAM ODS workflow in the area of vehicle safety with MDM Verena Jung, senior consultant, Peak Solutions GmbH 15:40 ATFX data analysis with IMC FAMOS 6.1 Ralf Winkelmann, international sales manager, IMC Meßsysteme GmbH 16:05 Measurement data access for development engineers Carsten Pietschmann, consultant, ISTEC GmbH 16:30 Supporting measured data management of ADTF-Data by using openmdm Niklas Hochmuth, project manager, Peak Solutions GmbH thursday 19 MAY Testbeds and System Integration 10:15 MOST 150: end-of-line testing for quality assurance Michael Schmidt, software development, Göpel Electronik GmbH 10:40 Expand the realms of automotive testing using Moog s versatile test systems Peter Onesti, test system engineer, Moog 11:05 Getriebe Schaltroboter Dieter Sorowka, business manager, IBS Ingenieurbüro Sorowka 11:30 Robot operation in all climatic zones Eric Frank, Weiss Umwelttechnik GmbH/ Günther Battenberg, Battenberg Robotic GmbH & Co.KG Remember, registering for Automotive Testing Expo Europe guarantees you FREE entry to four other industry-leading trade fairs Visit the website for latest updates:
7 11:55 Effectively using pressure sensors with today s data acquisition systems Chris Novak, global application engineer, Honeywell Sensing and Control 12:20 A new approach to measuring inertia properties Dr Robert Klöpper, chief technology officer, Resonik 12:45 Parameterisation increases the simplicity of ASAM GDI Bernd Wenzel, CEO, M&K Mess- und Kommunikationstechnik GmbH Evaluation and Analysis of Test Data 13:10 Using ASAM and ISO standards for remote flashing and data acquisition Colt Correa, vice president, Intrepid Control Systems 13:35 Use and benefit of vibration analysis in the field of R&D and production of combustion engines and transmissions Michael Routhrof, general manager, red-ant Measurement Technologies and Services 14:00 Convoy guidance for test fleets Steffen Firchau, project manager, MM-Lab GmbH 14:25 Development of a full-vehicle hybrid-simulation test using hybrid system response convergence (HSRC) Dave Fricke, senior staff engineer, MTS Systems Corporation Useful information opening times Tuesday 17 May Wednesday 18 May Thursday 19 May weather Average temperature 20ºC/68ºF to 25ºC/73ºF THE VENUE The new Stuttgart Messe is conveniently located adjacent to Stuttgart Airport, making it easily accessible to international visitors. Furthermore, there are two very well-appointed Mövenpick hotels within a three-minute walk of both the airport and the Messe hrs-17.00hrs 10.00hrs-17.00hrs 10.00hrs-15.00hrs PRESS AREA The press room is located in the main entrance opposite registration. Members of the press must register at the front desk for access to the press area and its facilities. venue Landesmesse Stuttgart GmbH, Messepiazza 1, Stuttgart hotels Various hotels can be booked directly through the Stuttgart- Marketing GmbH website. Contact details for Stuttgart s reservations centre: Phone: Fax: [email protected] Register now for your free entry pass:
8 EXHIBITOR LIST as at 4 APRIL 2011 A & D Europe GmbH ABB Automation GmbH Accurate Technologies GmbH & Co KG ACS Adaptronic Pruftechnik GmbH ADDITIVE Soft- und Hardware fur Technik und Wissenschaft GmbH Advantest Europe GmbH AFT Atlas Fahrzeugtechnik GmbH Agostec AICON 3D Systems GmbH AMS GmbH Angelantoni Industrie SpA Anthony Best Dynamics APIcom GmbH Aries Ingeniera Y Sistemas Arjeplog Test Center ASAM ev Auswuchttechnik-Maschinen- und Anlagentechnik Automotive Research Association of India (ARAI) Automotive Testing Expo 2012 Automotive Testing Technology International AVL Deutschland GmbH B+S Multidata GmbH Beck Messtechnik BEP Europe NV Berger Elektronik Berghof Automationstechnik GmbH Berndorf Band GmbH Berner & Mattner Systemtechnik GmbH BIA Bilz Vibration Technology AG Blum-Novotest GmbH Bosch Engineering GmbH Brüel & Kjær Sound and Vibration Measurement AS Caetec GmbH Cambustion Ltd CarMedialab GmbH CFM Schiller GmbH Clemssy CMV Hoven GmbH Concept Tech GmbH Control Techniques Controllersolution GmbH Critt M2A CSI SpA CSM GmbH CVMS Deutschland GmbH D2T GmbH Data Physics Corp Dedo Weigert Film GmbH Delphi Technical Center Luxembourg Denios AG Dewetron DG Technologies DHM Embedded Systems Discom GmbH DSA Daten-und Systemtechnik GmbH DSI-Delta Services Industriels dspace GmbH Durr Assembly Products GmbH DYNA- MESS Prufsysteme GmbH Dynamotive Ltd Eberspächer Electronics GmbH & Co KG ECON Technologies Co Ltd ECS Creatique EDAG GmbH & Co KGaA Elektrobit Austria GmbH Embitel GmbH Encopim GmbH ETAS GmbH Fabreeka GmbH Deutschland Faist Anlagenbau GmbH FAKT GmbH Falcon - Falkner Consulting fur Messtechnologie GmbH FES GmbH Fahrzeug- Entwicklung Sachsen FEV Motorentechnik GmbH FGB: Fertigungsgeratebau Adolf Steinbach GmbH & Co KG FOGTEC Brandschutz GmbH G.i.N Gesellschaft fur industrielle Netzwerke mbh G+H ISOLIERUNG GmbH Gantner Instruments GmbH GeneSys Elektronik GmbH Getac Technology GmbH Gfai Tech GmbH GOM GmbH Göpel Electronic GmbH GTM Gassman Testing and Metrology Gmbh Haussmann Industrieelektronik Heinzinger electronic GmbH High Speed Vision GmbH Hoerbiger Elektronik GmbH Honeywell Sensing and Control Horiba Europe GmbH Hottinger Baldwin Messtechnik GmbH Huber Automotive AG Hueber Getriebebau GmbH Hypertac GmbH IABG mbh IAC GmbH IAMT GmbH IAVF GmbH IBIS GmbH Schwingungsmessung - Vibration Analysis IBS Ingenieurbüro Sorowka ICT Software Engineering GmbH IDIADA Automotive Technology SA IMA Materialforschung und Anwendungstechnik GmbH Image Systems AB Imtech Deutschland GmbH & Co KG In2Soft GmbH Informatik Consulting Systems AG Innologic Electronics Inova GmbH Instron Structural Testing Systems GmbH, Germany Intecs SpA Integral Hydraulik Intercontec Produkt GmbH Interface Inc Intrepid Control Systems Inc Ipetronik GmbH & Co KG ISTEC GmbH IT Designers GmbH Italcoppie Sensori Srl IXXAT Automation GmbH JA-Gastechnology GmbH Jager Computergesteuerte Messtechnik GmbH Jordil-Technic Rotary-Transmitters Kapolnek GmbH Kistler Instrumente GmbH Klaric GmbH & Co KG KMT - Kraus Messtechnik & Telemetrie KNR Systems Inc Kolsch + Altmann Software & Management Consulting GmbH KRAL AG KRATZER AUTOMATION AG KRIWAN Testzentrum GmbH & Co KG KST Motorenversuch & Co KG Kubrich Ingenieurgesellschaft bmh & Co KG Kulite Semiconductor GmbH KYOWA Electronic Instruments Co Ltd. L.E.T. Automotive NV Labcell Ltd Lauda Dr R Wobser GmbH & Co KG LaVision GmbH LMS International LTG Aktiengesellschaft Luminys Systems Corp m+p international Magtrol SA MAHA AIP GmbH & Co KG MAIBACH Industrie - Plastic GmbH Makross Ingenieure Mawick-Krumrein-Groß Manner Sensortelemetrie GmbH MAXIMATOR GmbH MCE Stahl und Maschinenbau GmbH & Co KG measx GmbH & Co KG Meggitt Sensing Systems - Measurement Group Mettler-Toledo AG MIC Mass Interface Connections GmbH mm-lab GmbH MOOG MS4 - Analysentechnik GmbH MTS Systems Corp Mueller-BBM VibroAkustik Systeme GmbH NAC Deutschland GmbH Nardo Technical Center Srl, Prototipo Group NATEC Sensors GmbH National Instruments Germany GmbH Orion Test Systems & Engineering Inc Oxford Technical Solutions Panasonic Marketing Europe GmbH Parasoft SA PCB Piezotronics Europe GmbH PCO AG Peak Solution GmbH Peter Huber Kaltemaschinenbau GmbH Photron (Europe) Limited Pickering Interfaces GmbH Plascore GmbH & Co KG Plug-In Electronic GmbH RA Consulting GmbH Racelogic Reckmann GmbH red-ant Reich Kupplungen Reilhofer KG Resonic RMS Dynamic Test Systems Robert Bosch GmbH Rossel Messtechnik GmbH Rototest AB S.E.A. Science & Engineering Applications Datentechnik GmbH SAB Brockskes GmbH & Co KG SBI Schreiber, Brand u. Partner Ingenieugesellschaft mbh Schneider Kreuznach Seattle Safety Sensors Europe GmbH Siemens AG Sierra Instruments SIMPRO SpA Simtools GmbH SincoTec Group Single Temperiertechnik GmbH SITIA SMETEC GmbH Softing Automotive Electronics GmbH Southern Hemisphere Proving Ground (SHPG) SPL Spindel und Präzisionslager GmbH Springer Fachmedien Wiesbaden GmbH Stahle GmbH Stankowitz Test Equipment GmbH Star Cooperation GmbH Staubli Tec-Systems GmbH Stiegele Datensysteme Stolle Wilhelm GmbH Stringo Swagelok B.E.S.T. Fluidsysteme GmbH Synotech Sensor und Messtechnik GmbH Taylor Dynamometer / DynoMotive Tectos GmbH TEG mbh Telemetrie Elektronik GmbH Telemotive AG Teseo SpA Test Site Sweden Test World Oy TGS Technogerma Systems GmbH ThyssenKrupp System Engineering, Division Testing Solutions Tira GmbH TMS Telemetrie-Messtechnik TTTech Automotive GmbH TÜV Rheinland Group TZM Unico Deutschland GmbH Unico European Operations UTAC - Montlhery Vazquez y Torres Ingenieria SL Vector Informatik GmbH Vibration Research Virginia Panel Corporation Vision Research Europe VISOL Inc VKT GmbH Voetsch Industrietechnik GmbH VSE Volumentechnik GmbH WBI Wallner und Brand Ingeniergesellschaft mbh Weiss Umwelttechnik GmbH Werum Software & Systems AG Wiegel Gebaeudetechnik GmbH Winkler GmbH WPM Werkstoffprüfsysteme Leipzig GmbH X2E GmbH XKrug GmbH ZF Passau GmbH ZSE Electronic Instruments Mess-Systeme & Sensortechnik GmbH Zwick GmbH & Co KG Visit the website for latest updates:
MODEL-BASED DEVELOPMENT OF AUTOMOTIVE EMBEDDED SOFTWARE IN COMPLIANCE WITH ISO 26262: CHALLENGES & EFFECTIVE SOLUTIONS 8 JUNE - 9 JUNE 2015
MODEL-BASED DEVELOPMENT OF AUTOMOTIVE EMBEDDED SOFTWARE IN COMPLIANCE WITH ISO 26262: CHALLENGES & EFFECTIVE SOLUTIONS 8 JUNE - 9 JUNE 2015 Highlights Developing safety-critical software in compliance
openmdm an Open Source Platform for Measured Data Management Dr. Dietmar Rapf, Michael Schwarzbach
openmdm an Open Source Platform for Measured Data Management Dr. Dietmar Rapf, Michael Schwarzbach Agenda History and Scope of measured data management ASAM ODS the basis for MDM systems openmdm How openmdm
6th Vector CONGRESS. November 28 and 29, 2012 Stuttgart
6th Vector CONGRESS November 28 and 29, 2012 Stuttgart WEDNESDAY, November 28, 2012 Alte Reithalle 09:45-10:00 Welcome Management Vector Informatik 10:00-10:30 Keynote Intelligent electronics the key to
openmdm an Open Source Platform for Measured Data Management Dr. Dietmar Rapf, Michael Schwarzbach
openmdm an Open Source Platform for Measured Data Management Dr. Dietmar Rapf, Michael Schwarzbach openmdm an Open Source Platform for Measured Data Management Seite 2 IT and PLM consulting business since
BPMN Process Design for Complex Product Development and Production
BPMN Process Design for Complex Development and ion Dieter Roller, Erik Engesser Institute of Computer-aided Development Systems Universität Stuttgart Universitätsstrasse 38 D-70569 Stuttgart, Germany
EXHIBITOR LIST Exhibitors as of 08 May 2006 (All shows)
EXHIBITOR LIST Exhibitors as of 08 May 200 (All shows) HALL KEY Hall : Halls and : Halls.1 and : Hall : Hall.2: European Automotive Components Expo Automotive Testing Expo Engine Expo Crash Test Expo Vehicle
Automatic ASAM MCD-3 supported test. PikeTec GmbH Dr. Jens Lüdemann
Automatic ASAM MCD-3 supported test PikeTec GmbH Dr. Jens Lüdemann Test challenges Clear test case description (Modeling) Continuity and consistency at all test platforms Automated Execution, Assessment,
Company wide Testdata Postprocessing Solutions
Company wide Testdata Postprocessing Solutions ODS & CEA for web-based and desktop applications Dr. Bernhard Sünder, AMS GmbH Content The AMS company ODS and CEA Web based Data Manangement Systems jbeam
Collaborating in California: Open HIL Test System Architecture uses the ASAM HIL API
Collaborating in California: Open HIL Test System Architecture uses the ASAM HIL API ASAM INTERNATIONAL CONFERENCE, Dec. 03 04, 2013, Dresden, Germany Dr. Jiri Keprt, National Instruments Corporation (Speaker)
Requirements for Standard Compliant Electrical Test Authoring in Manufacturing Applications
Requirements for Standard Compliant Electrical Test Authoring in Manufacturing Applications Dipl. Ing. Alfons Schulte DSA-Daten-- Daten- und Systemtechnik GmbH, Aachen DSA-GmbH_PR_040308 Topics Authoring
The MDM (Measurement Data Management) system environment
1 Audi fast facts Brands: Audi and Lamborghini 964.151 premium cars delivered to customers 2007 33.600.000.000 turnover 2007 53.347 employees worldwide 2 Overview Audi's test environment Measurement data
imc BUSDAQ autonomous intelligent synchronized Field bus data acquisition - from stationary to mobile imc productive testing
imc BUSDAQ autonomous intelligent synchronized Field bus data acquisition - from stationary to mobile imc productive testing www.imc-berlin.com/busdaq imc BUSDAQ/BUSLOG at a glance Processes multiple networks
Dr. Ulrich Lauff, Dr. Kai Pinnow, and Dipl.-Ing. Florian Schmid. New Tools and Methods for Validation and Calibration
Special Reprint from HANSER automotive 10/2015 Dr. Ulrich Lauff, Dr. Kai Pinnow, and Dipl.-Ing. Florian Schmid New Tools and Methods for Validation and Calibration Mastering complex vehicle systems reliably
Vehicle Electronics. Services and Solutions to Manage the Complexity
Vehicle Electronics Services and Solutions to Manage the Complexity INNOVATIONS & DEVELOPMENT CYCLES Commercial vehicle manufacturers are experiencing a technological change. In addition to the rising
Electronics & Electrification
Passion. Innovation. Solutions. Electronics & Electrification APPLICATIONS FOR INTELLIGENT SYSTEMS www.fev.com CONTENTS COMPANY PROFILE 4 SOFTWARE DEVELOPMENT AND FEV EMBEDDED SYSTEMS TESTCENTER (FEST)
Chip simulation of automotive ECUs
Chip simulation of automotive ECUs Jakob Mauss, QTronic GmbH Matthias Simons, Daimler AG 9. Symposium Steuerungssysteme für automobile Antriebe Berlin-Tempelhof, 20.-21.09.2012 Outline of the talk Chip
Dr.-Ing. Rainer Rasche dspace GmbH Rathenaustrasse 26 33102 Paderborn automotive testing expo June 22, 2010
Combining Two Worlds: Precise Real-Time- Based and Convenient PC-Based Testing Dr.-Ing. Rainer Rasche dspace GmbH Rathenaustrasse 26 33102 Paderborn nd automotive testing expo June 22, 2010 Agenda Testautomation
Convenient Charging of Electric Vehicles
Technical Article Convenient Charging of Electric Vehicles Smart Charging with MICROSAR IP enables flexible charging processes and easy payment Compared to conventionally powered vehicles, electric vehicles
Introduction to the Siemens PLM End to End Solution for Composites
Introduction to the Siemens PLM End to End Solution for Composites Restricted Siemens AG 2014 2013 All rights reserved. Page 1 Siemens PLM is Dedicated to the Future of Lightweight Engineering Bringing
9 th European Pressure Equipment Conference. Symposium, June 8 9, 2011, Fürstenfeldbruck (near Munich), Germany
International Conferences 9 th European Pressure Equipment Conference Symposium, June 8 9, 2011, Fürstenfeldbruck (near Munich), Germany TÜV SÜD Industrie Service GmbH TÜV SÜD Akademie GmbH The conference
ACHIEVING FUNCTIONAL SAFETY OF AUDI DYNAMIC STEERING USING A STRUCTURED DEVELOPMENT PROCESS
ACHIEVING FUNCTIONAL SAFETY OF AUDI DYNAMIC STEERING USING A STRUCTURED DEVELOPMENT PROCESS Dr Juergen Schuller* 1, Marnix Lannoije* 2, Dr Michael Sagefka* 3, Wolfgang Dick* 4, Dr Ralf Schwarz* 5 * 1 Audi
Heavy-Duty Diesel Diagnostics
3 rd International Conference Heavy-Duty Diesel Diagnostics The only dedicated industry meeting of Diagnostics for Trucks, Buses and NRMM 9 October 2014 in Nuremberg, Germany Pre-event 8 October 2014:
Central Counterparty CCP Circular 36/02
eurex information Date: Frankfurt, September 13, 2002 Recipients: All Eurex Clearing members and vendors Authorized by: Daniel Gisler Central Counterparty CCP Circular 36/02 Contact: Functional Member
Consulting, Engineering & Managed Service Provider
Consulting, Engineering & Managed Service Provider A Joint Venture Company Together Making a difference Introduction Genesis of AeroEuro: A Joint Venture between Punj Lloyd Group, India and GECI, France
HANDOUT CLIMATIC WIND TUNNEL MAHLE BEHR GMBH & CO. KG STATUS: FEBRUARY 2014
HANDOUT CLIMATIC WIND TUNNEL MAHLE BEHR GMBH & CO. KG STATUS: FEBRUARY 2014 CLIMATIC WIND TUNNEL FOR CAR, VAN AND TRUCK Location 70469 Stuttgart-Feuerbach, Germany Size Test section (L x W x H) 13 x 8.8
ROS-INDUSTRIAL. Technologies, Trends, Applications
FRAUNHOFER INSTITUTe FoR Manufacturing engineering and Automation IPA Conference June 9, 2015 ROS-INDUSTRIAL Technologies, Trends, Applications Preface The Event at a Glance Established already in robotics
Distributed and rugged load data acquisition for extreme conditions LMS SCADAS Satellite
Distributed and rugged load data acquisition for extreme conditions LM CADA atellite Unrestricted iemens AG 2016 Realize innovation Gert Frans iemens Industry oftware NV, Belgium About the presenter Gert
ASAM ODS, Peak ODS Server and openmdm as a company-wide information hub for test and simulation data. Peak Solution GmbH, Nuremberg
ASAM, and as a company-wide information hub for test and simulation data Peak Solution GmbH, Nuremberg Overview ASAM provides for over a decade a standard, that has proven itself as a reliable basis for
Virtual Integration and Consistent Testing of Advanced Driver Assistance Functions
Stuttgart, Testing Expo 2012 Virtual Integration and Consistent Testing of Advanced Driver Assistance Functions 2012-06-12 Jürgen Schüling Agenda Introduction and Motivation State of the Art Hardware in
EHOOKS Prototyping is Rapid Again
09CV-0113 EHOOKS Prototyping is Rapid Again Vivek Jaikamal ETAS Inc. Nigel Tracey ETAS Ltd. Copyright 2009 SAE International ABSTRACT Automotive controls engineers have traditionally used bypass rapid
Driveability Simulation in the continuous development process. Dr. Josef Zehetner, DI Matthias Dank, Dr. Peter Schöggl, AVL List GmbH, Graz
Driveability Simulation in the continuous development process Dr. Josef Zehetner, DI Matthias Dank, Dr. Peter Schöggl, AVL List GmbH, Graz Target: Objective Driveability Assessment and Simulation throughout
How To Powertrain A Car With A Hybrid Powertrain
ELECTRIFICATION OF VEHICLE DRIVE TRAIN THE DIVERSITY OF ENGINEERING CHALLENGES A3PS Conference, Vienna Dr. Frank Beste AVL List GmbH 1 Motivation for Powertrain Electrification Global Megatrends: Urbanization
Press. 13 May 2014. Email-Expo Trade Fair and Congress for Data Driven Marketing Frankfurt am Main, 13 + 14 May 2014
Press Email-Expo Trade Fair and Congress for Data Driven Marketing 13 + 14 May 2014 13 May 2014 Christine Vogel Tel. +49 69 7575-6084 Fax +49 69 7575-5727 [email protected] www.messefrankfurt.com
Application Example: Automotive Testing: Optical 3D Metrology improves Safety and Comfort
Application Example: Automotive Testing: Optical 3D Metrology improves Safety and Comfort Measuring System: PONTOS, ARAMIS, TRITOP, ATOS, GOM Touch Probe Keywords: Automotive, Crash Testing, static and
Systems Engineering. Aim. Dr Peter Jones. Degree Course Leader
Systems Engineering Dr Peter Jones Degree Course Leader Aim Systems Engineering Course Structure: BEng Course Structure: MEng Electives Taking a Year Out PDR Professional Accreditation 1 Systems Engineering
Gian Luca Sacco Marketing Director South & Central Europe. Smarter decisions, better products.
Gian Luca Sacco Marketing Director South & Central Europe Smarter decisions, better products Smarter decisions, better products. Today s Product Challenges are More Difficult Than Ever Before Landing on
New Technologies for Emerging Markets
ATZ CONFERENCE MANAGEMENT 2008 26 NOVEMBER 2008 FRANKFURT/M. GERMANY New Technologies for Emerging Markets Strategies for European Automotive Companies to Meet Customers' Needs _ Entering markets in new
VDE Prüf- und Zertifizierungsinstitut GmbH VDE Testing and Certification Institute
VDE Prüf- und Zertifizierungsinstitut GmbH VDE Testing and Certification Institute 1. VDE-Institute Introduction 2. Battery Applications 3. Battery Performance Testing 4. Example Of The Battery Efficiency
How To Make Autosar A Successful Business Model
How the landscape will change AUTOSAR from basic software suppliers point of view Dr. Emmerich Fuchs, DECOMSYS GmbH; Johann Haas, 3SOFT GmbH; Georg Kopetz, TTTech Computertechnik AG; Joachim Langenwalter,
One common language for domain experts and test engineers
One common language for domain experts and test engineers Cost-effective creation and reuse of test sequences with Vector s Test Automation Editor V0.01 2011-04-13 Agenda > Overview Introduction to the
Automatic Validation of Diagnostic Services
Development ProcessES Diagnostics Automatic Validation of Diagnostic Services For the first time, a fully automated test case generator has been introduced in diagnostics validation at General Motors Europe
Development of AUTOSAR Software Components within Model-Based Design
2008-01-0383 Development of AUTOSAR Software Components within Model-Based Design Copyright 2008 The MathWorks, Inc. Guido Sandmann Automotive Marketing Manager, EMEA The MathWorks Richard Thompson Senior
Company Profile 2014 October 2014
Company Profile 2014 October 2014 Company - Vision We are an independent and international full range Electronic Manufacturing Service (EMS) We provide innovative solutions and as an efficient performing
SOFTWARE DEVELOPMENT. Innovative. in Automotive
Innovative SOFTWARE DEVELOPMENT SOFTWARE FOR PILOTED DRIVING AGILE IN AUTOMOTIVE CONTINUOUS VERIFICATION OPEN SOURCE PLATFORMS ADAS INTEGRATION PLATFORM in Automotive ADVISORY BOARD Prof. Dr Dr h.c. Manfred
Integrated Custom Systems
Integrated Custom Systems Compact panels Standard Manifolds & Assemblies Electronic pressure control Custom manifolds & Assemblies Automated test benches S t r e a m l i n e y o u r p r o c e s s Complete
User-friendly Configuration of AUTOSAR ECUs with Specialized Software Tools
User-friendly Configuration of AUTOSAR ECUs with Specialized Software Tools The simple CAN ECU is a thing of the past. Now, a typical ECU utilizes many functions of the AUTOSAR basic software to perform
How To Run Goodflex Rubber Company
Prototype. Production. Performance www.goodflexrubber.com Are a leading UK manufacturer and supplier of rubber hose mouldings assemblies We re also very proud to be a Great British manufacturer History
ASAM ODS Workflow in the area of vehicle safety with openmdm
ASAM ODS Workflow in the area of vehicle safety with openmdm The company Peak Solution GmbH Founded 2005 25 Employees Core competences: Software Engineering (SWE) Identity- and Access-Management (IAM)
8 th EFAConference: We Create the Smart Factory The European Business Conference for Assembly and Handling Technology October 30-31, 2015 Frankfurt,
8 th EFAConference: We Create the Smart Factory The European Business Conference for Assembly and Handling Technology October 30-31, 2015 Frankfurt, Germany Why should you attend? The EFAConference which
From Big Data to Smart Data Thomas Hahn
Siemens Future Forum @ HANNOVER MESSE 2014 From Big to Smart Hannover Messe 2014 The Evolution of Big Digital data ~ 1960 warehousing ~1986 ~1993 Big data analytics Mining ~2015 Stream processing Digital
Automotive Software Development Challenges Virtualisation and Embedded Security
Automotive Software Development Challenges Virtualisation and Embedded Security 1 Public ETAS-PGA/PRM-E October 2014 ETAS GmbH 2014. All rights reserved, also regarding any disposal, exploitation, Automotive
Meß- und Kommunikationstechnik GmbH Annaberger Str. 240 09125 Chemnitz Tel. 0371 5347 529 http://www.meskom.de [email protected]
Meß- und Kommunikationstechnik GmbH Annaberger Str. 240 09125 Chemnitz Tel. 0371 5347 529 http://www.meskom.de [email protected] Author Dipl.-Ing. Bernd Wenzel Managing Partner of M&K GmbH www.meskom.de /
Software Production. Industrialized integration and validation of TargetLink models for series production
PAGE 24 EB AUTOMOTIVE Industrialized integration and validation of TargetLink models for series production Continuous Software Production The complexity of software systems in vehicles is increasing at
Welcome to HMS! Your innovative partner for industrial communication. HMS products and brands. Quality and reliability at heart
This is Welcome to HMS! Your innovative partner for industrial communication HMS products and brands Quality and reliability at heart Solid. Proven. Trusted. Always close Take off with HMS Get connected!
Herstellerinitiative Software (OEM Initiative Software)
Herstellerinitiative Software (OEM Initiative Software) Dr. Michael Daginnus Volkswagen AG Wolfsburg Dr. Dieter Marx Porsche AG Weissach Dr. Ralf Belschner Daimler AG Sindelfingen Kai Barbehön BMW AG München
smart grids forum Intelligent power grids: How to build in Safety and Security Conference March 21 22, 2013 in Munich, Germany
smart grids forum Intelligent power grids: How to build in Safety and Security Conference March 21 22, 2013 in Munich, Germany TÜV SÜD AG Embedded Systems TÜV SÜD Akademie GmbH About the Conference To
COURSE PROGRAM. Isolato 47 - Politecnico di Bari. in Bari, Italy. September 21-24, 2015. Grande Albergo delle Nazioni.
COURSE PROGRAM Isolato 47 - Politecnico di Bari in Bari, Italy September 21-24, 2015 Grande Albergo delle Nazioni in Bari, Italy BARI AUTOMOTIVE SUMMER SCHOOL Centro Studi Componenti per Veicoli SpA (BOSCH
AUTOMOTIVE CAMPUS HIGH TECH ON WHEELS. Swedish Business in Brabant 15 October 2015
AUTOMOTIVE CAMPUS HIGH TECH ON WHEELS Swedish Business in Brabant 15 October 2015 PROGRAMME 15.00 hr Presentation AutomotiveNL / Automotive Campus 15.30 hr Presentation Volvo Cars Netherlands 16.00 hr
CASE STUDY. Automotive Components. Bosch Drancy, France Brake NVH Testing. Braking Systems. France. Automotive. PULSE, Transducers
CASE STUDY Bosch Drancy, France Brake NVH Testing France Automotive PULSE, Transducers The world-renowned Bosch group is a major producer of a vast range of automotive components. The company is an OEM
Challenge of Ethernet Use in the Automobile
Challenge of Ethernet Use in the Automobile Flexible interfaces and software tools simplify ECU development Already this year, Ethernet will be used as a system network in the first production vehicles.
2nd Annual Conference Global Automotive Lightweight Materials Initiative Summit
2nd Annual Conference Key Practical Points of the Summit: Optimizing Cost-Effective Materials and Process Technologies Using Lightweight Materials for Achieving Greater Energy Efficiency Securing Supply
Industrie 4.0 and Digital Transformation in NRW: Challenges, Opportunities and Potential for Cooperation Seoul, 20.04.2016
Industrie 4.0 and Digital Transformation in NRW: Challenges, Opportunities and Potential for Cooperation Seoul, 20.04.2016 Industrie 4.0 and Digital Transformation in NRW 1 Challenges Enabling Technologies
Application Example: Automated Robot Inspection Cell for Quality Control on Sheet Metal Components. The future of metrology in vehicle construction
Application Example: Automated Robot Inspection Cell for Quality Control on Sheet Metal Components The future of metrology in vehicle construction Measuring system: ATOS, GOM Inspect Professional Keywords:
Choose certainty. Add value.
TÜV SÜD Group Choose certainty. Add value. TÜV SÜD creates increased safety and added economic value. As process partners with comprehensive industry knowledge, our teams of specialists provide early consultation
Safety and security related features in AUTOSAR
Safety and security related features in Dr. Stefan Bunzel Spokesperson (Continental) Co-Authors: S. Fürst, Dr. J. Wagenhuber (BMW), Dr. F. Stappert (Continental) Automotive - Safety & Security 2010 22
Investor day. November 17, 2010. Energy business Michel Crochon Executive Vice President
Investor day November 17, 2010 Energy business Michel Crochon Executive Vice President We built a global leadership in medium voltage and grid automation with Areva Distribution MV switchgears & systems
Cross-Company System Simulation using the GUSMA-Standard for Co-Simulation
Cross-Company System Simulation using the GUSMA-Standard for Co-Simulation The industry of mobile machines is well known for the development of highly innovative and complex products. They are affected
Pivot Park Screening Centre participates in novel 196 million pan-european drug discovery platform
PRESS RELEASE Pivot Park Screening Centre participates in novel 196 million pan-european drug discovery platform Pivot Park Screening Centre in Oss will play an important role in a new pan-european drug
THE EVENT THE TOPICS. 6 th BETA CAE International Conference 10-12 June 2015
THE EVENT Already a landmark event in the calendar of CAE professionals, our International conference celebrates this summer its 10th year. Being grateful to the contributors, the participants, and the
Multi-Agent Systems. Expert Forum Agents within the context of Industry 4.0. Industry 4.0 Machine Learning. Energy and Smart Grids.
Multi-Agent Systems Event Expert Forum Agents within the context of Industry 4.0 Industry 4.0 Machine Learning Material Handling Energy and Smart Grids Energy Management Production Control Operations Scheduling
MeDaMAk. A measurement data management system based on the openmdm framework. Christian Rechner EPOS CAT GmbH
MeDaMAk A measurement data management system based on the openmdm framework Christian Rechner EPOS CAT GmbH Topics Requirements System overview Database model The MDM base model System specific modelling
imc FAMOS 6.3 visualization signal analysis data processing test reporting Comprehensive data analysis and documentation imc productive testing
imc FAMOS 6.3 visualization signal analysis data processing test reporting Comprehensive data analysis and documentation imc productive testing imc FAMOS ensures fast results Comprehensive data processing
CeMAT. 31 May 3 June 2016 Hannover Germany. cemat.com. World leading trade fair for intralogistics & supply chain management
CeMAT 31 May 3 June 2016 Hannover Germany cemat.com World leading trade fair for intralogistics & supply chain management Shaping the future of intralogistics CeMAT 2016 Smart Supply Chain Solutions is
Software Development for Multiple OEMs Using Tool Configured Middleware for CAN Communication
01PC-422 Software Development for Multiple OEMs Using Tool Configured Middleware for CAN Communication Pascal Jost IAS, University of Stuttgart, Germany Stephan Hoffmann Vector CANtech Inc., USA Copyright
SMART ASSET MANAGEMENT MAXIMISE VALUE AND RELIABILITY
SMART ASSET MANAGEMENT MAXIMISE VALUE AND RELIABILITY Electrical equipment is a critical component of your asset portfolio. Beyond its financial value, it plays an even greater role in your business performance.
Delta Transportation Automation Solution. www.deltaww.com
Delta Transportation Automation Solution www.deltaww.com Smarter. Greener. Together. Who We Are Delta is a market leader that has won wide recognition as a: Global power and thermal solution provider for
Mastering the flood of NVH data through ASAM-ODS and MDM
NVH data management Mastering the flood of NVH data through ASAM-ODS and MDM Dr. Dietmar Rapf science + computing ag IT Service and Software Solutions for Complex Computing Environments Tuebingen Muenchen
Plastic Materials in Plant Engineering
International Conferences Plastic Materials in Plant Engineering Experience and New Developments in the Industrial Application of Thermoplastics and Linings 3 rd International Conference March 7 8, 2012,
Performance Study based on Matlab Modeling for Hybrid Electric Vehicles
International Journal of Computer Applications (975 8887) Volume 99 No.12, August 214 Performance Study based on Matlab Modeling for Hybrid Electric Vehicles Mihai-Ovidiu Nicolaica PhD Student, Faculty
Emergency Power Systems at Nuclear Power Plants
Emergency Power Systems at Nuclear Power Plants Symposium April 11 12, 2013 in Munich, Germany TÜV SÜD Industrie Service GmbH TÜV SÜD Akademie GmbH About the Symposium The German Federal Government attempts
2nd TÜV Rheinland China Symposium Functional Safety in Nuclear and Industrial Applications October 19 and 20, 2015 in Shanghai China
2nd TÜV Rheinland China Symposium Functional Safety in Nuclear and Industrial Applications October 19 and 20, 2015 in Shanghai China Functional Safety as well as Security have become one of the most growing
Business Delegation Trip Indonesia. 11 19 October 2014 Jakarta, Bandung, Singapore
Business Delegation Trip Indonesia 11 19 October 2014 Jakarta, Bandung, Singapore Business Delegation Trip Indonesia 11 19 October 2014 Jakarta, Bandung, Singapore 3 Content CHINABRAND CONSULTING LTD.
ISO11783 a Standardized Tractor Implement Interface
ISO a ized Tractor Implement Interface Peter Fellmeth, Vector Informatik GmbH The upcoming ISO standard will be the preferred tractor Implement interface in the agricultural industry. Therefore the ISO
EBERSPÄCHER ELECTRONICS automotive bus systems
EBERSPÄCHER ELECTRONICS automotive bus systems YOUR PARTNER FOR IN-VEHICLE NETWORKING DRIVING THE MOBILITY OF TOMORROW 2 AUTOmotive bus systems EBERSPÄCHER ELECTRONICS: THE EXPERTS IN AUTOMOTIVE BUS SYSTEMS
Karlheinz Brandenburg was born on June 20th 1954 in Erlangen, Germany.
Karlheinz Brandenburg was born on June 20th 1954 in Erlangen, Germany. He received engineering degrees from Erlangen University in Electrical Engineering (1980) and in Mathematics (1982). In 1989 he obtained
EUROTAXGLASS S WHITEPAPER SERIES ELECTRIC VEHICLES THE END OF THE HYPE? RESULTS OF THE 2012 CUSTOMER SURVEY
EUROTAXGLASS S WHITEPAPER SERIES ELECTRIC VEHICLES THE END OF THE HYPE? RESULTS OF THE 2012 CUSTOMER SURVEY MAINTAL JANUARY 2013 INTRODUCTION Electric vehicles are a phenomenon. Customers and automotive
Press Release. More than 70 participants from 45 member companies attend ETG meeting. EtherCAT Technology Group kick-off meeting
ETG 022004 Kick-off meeting 31st March 2004 Page 1 from 5 More than 70 participants from 45 member companies attend ETG meeting EtherCAT Technology Group kick-off meeting The EtherCAT Technology Group
Faculty of Electrical Engineering and Communication Brno University of Technology. www.feec.vutbr.cz
Faculty of Electrical Engineering and Communication Brno University of Technology www.feec.vutbr.cz Faculty of Electrical Engineering History Faculty of Electrical Engineering was established in 1959 720
Service Oriented Architecture for Agricultural Vehicles
Service Oriented Architecture for Agricultural Vehicles Leipzig, 30.9.2010 8. Workshop Automotive Software Engineering Dr. G. Kormann, M. Hoeh, H.J. Nissen THE END of Embedded Software? www.electronics-ktn.com/
Remote services are changing your industry. World-class Remote Services Managing Remote Services in the IoT. Are you prepared for the ride?
Remote services are changing your industry Are you prepared for the ride? World-class Remote Services Managing Remote Services in the IoT A Service Innovation Project 3 November - 5 December, 2014 Düsseldorf,
EPoSS Strategy Paper Smart Systems for the Full Electric Vehicle
Joint EC/EPoSS Expert Workshop Smart Systems for the Full Electric Vehicle Brussels 25-26 June 2008 EPoSS Strategy Paper Smart Systems for the Full Electric Vehicle August 2008 1. Introduction Growing
idas Data Application and Documentation
idas Data Application and Documentation intelligent Data Application System Rainer Röhrle ZF Friedrichshafen AG TEN_1001_2_en Application Process (commercial vehicles) Offline calibration (pre calibration)