DET NORSKE VERITAS. ApPROVAL FOR TEST AND DEMONSTRATION SWT Location for installation: Hammerholmen 50 X & 50 Y, 2650 Hvidovre
|
|
- Cora O’Brien’
- 8 years ago
- Views:
Transcription
1 II ~ ~ DET NORSKE VERITAS ApPROVAL FOR TEST AND DEMONSTRATION SWT Location for installation: Hammerholmen 50 X & 50 Y, 2650 Hvidovre C-DNV Certificate Dumber : Siemens Wind Power A/S Borupvej Brande Valid until: Date of issue This certificate attests compliance with DSIEN :2006 concerning the design and manufacture. The certification has been carried out according to Executive order no. 651 of26 June 2008, "Bekendlg,l,nels.e om teknisk godkendelsesordning for konstruktion, fremstilling, opstilling. vedligeholdelse og service afvindm'lller". Use of the installation is conditional upon no unauthorized changes being made to the wind turbine certified. Reference documents: Reference documents for approval: DNV Verification Report: See PD-6422J7-J2CJHXN-5 PD-6422 I 7-1 2CJHXN-5 Wind Turbine specification: IEC WTGS class: S. For further infonnalion see the Appendix of this Certificate. C ~- L Q-"~"-~, j mte Vestergaard 5 v~.. Date: 2009-tl-1O? Dale: 'OD ~~ fm) JS Management Representative Project Manager Det Nonke Veritas, Danmark AfS RJAC257 Det Nonke Verita:'!, Danmark AfS Tuborg Parkvej Hellerup Tuborg Parkvej 8, 2900 Hellerup DET NORSKE VERITAS, DANMARK AiS
2 DETNORSKE VERITAS DANMARKA/S C-DNV ApPROVAL FOR TEST AND DEMONSTRATION APPENDIX WIND TURBINE SPECIFICATION General: Wind turbine address: Wind Turbine No.2: Wind Turbine No.3: Wind turbine owner, Name: Address: IEC WT class: Rotor diameter: Rated power: Rated wind speed V r : Hub height(s): Operating wind speed range Vin-Voul: Design life time: Wind conditions: V"r(hub height): Vave (hub height): lrerat V h " ~ 15 mls Ref. IEC cd. 3: Mean flow inclination: Electrical network conditions: Normal supply voltage and range: Normal supply frequency and range: Voltage imbalance: Maximwn duration of electrical power network outages: Nwnber of annual electrical network outages: Hammerholmen 50 X, 2650 Hvidovre Hammerholmen 50 Y, 2650 Hvidovre Donge Energy AlS A C Meyers Vlenge Kobenhavn SV S 120m 3.6MW 12 mls 93.2m 4-25m1s 3 years 37.7 mls 8.58 mls 14 % (lec turbulenee elass B) 8' 690 V ±IO% 50 Hz ±1% 1% No limits when requirements in manuals are followed Maximum 1000 per year Other environmental conditions (where taken into account): Air density: Normal and extreme temperature ranges: Relative hwnidity: Solar radiation: Salinity: Design conditions for offshore installation: Ice loads Description of lightning proteetion system kg/m] Normal: -10 C to +35 C Extreme: -20 C to +45 C 100% 1000 W/m' Present Horizontal: 1.7 MN Vertical: 0.8 MN Designed acc. to IEC and IEC DET NORSKE VERITAS, DANMARK A/S CUITlFICATION CARRIED OUT Ir'i TI:CHNICAL COOPERATION WITH RIso NATlO~ALLABORATORY Page 2 of3
3 DET NORSKE VERITAS DANMARKNS C-DNV ApPROVAL FOR TEST AND DEMONSTRA non Maio components: Blade type: Gear box type: Generator type: Tower type: Serviee lift: Crane: Foundation: Siemens Wind Power, Winergy, PZAB 3541 ABB, AMB 560L4A BAYH Tubular steel tower SKY MAN TH250 Palfmger, PC 3300 compact Reinforced concrete gravity structure DET NORSKE VERITAS, DANMARK AlS CERTlrICATIOr-i CAIlRIED OUT IN TECHSIC-4l. COOPER.ATlOr-i wrrn RiS0 SAT10r-iAl. LABORATOR't Page 3 of3
4 DET NORsKE VERITAS [I Report for Siemens Wind Power A/S 5WT fur Avedcre MANAGING RISK _ ApPENDIX 1 WIND TURBINE SPECIFICATION General IEC WT class Rotor diameter Rated power Rated wind speed Vr Hub height(s) Operating wind speed range Vin-Vout Design life time Wind conditions Vrl:f V a...c ITef Mean flow inclination Other environmental conditions Air density Nonnal and extreme temperature ranges Relative humidity Solar radiation Salinity Design conditions for offshore installation: lee loads Deseription of lightning protection system S 120 m 3.6MW 12 mls 93.2m 4-25 mls 3 years 37.7 mls 8.58 mls 14 % (IEC turbulence etass B) 8' kg/m] Nonnal: Extreme: 100% 1000 W/m' Present _lode to +35 e _20 C to +45 C Horizontal: }.7 MN Vertical: 0.8 MN Designed aee. [0 lec and lec 613[2-1 DNV Reg No: PD !2CJHXN-S Rnisioll No: (l Dale Page 1-\
5 DET NORSK VERITAS Report for Siemens Wind Power AJS SWT-3.6-J20 for Avedm-e MANAGING RISK II _ Electrical network conditions Normal supply voltage and range 690 V ±IO% Nonnal supply frequency and range 50 Hz ±1% Voltage imbalance 1% Maximum duration ofelectrical power network No limits when requirements in manuals are outages followed Number of annual electrical network outages Maximum 1000 per year Rotor Cone angle Tilt angle Tip angle Blades Siemens Wind Power AiS B58-00 GRE Blade length 5&.5 m Air brake Full span pitching Pitch system HydrauliclElectrical unit Pitch hearing type Hub Main shaft Main bearing Front Rear Main gear Gear ratio Coolingllubrication system Hydraulic Fritz Schur Rothe Erde double row ball bearing, Cast spherical hub EN-GJS &U-LT Forged 34CrNiMo6 FAG FAG FAG Winergy PZAB : Separate cooler, pressure lubrication DNV Reg No: PD-64nI7 I2CJHXN-~ ReviSIOn No: 0 Date: Page 1-2
6 DET NORSKE VERITAS Repon for Siemens Wind Power A/S SWT 3.6-J 20 for Aved0Te MANAGING RISK!I _ Filter system Couplings Main shaft-main gear Main gear-generator Generator Nominal power Voltage Rpm Insulation class Protection class (ace. to IEC529) Machine foundation Yaw system Yaw bearing type Yaw drive type Yaw brake type Yaw speed Mechanical brakes Loeation Brake torque Protection system Description Tower(s) Height(s) Control system Inline and offline filters Sliiwe HSD Centalink CL 75 ABB AMB 560L4A BAYH 3600 kw 750 V 1600 rpm F IP 54 Cast & Welded EN-GJS U-LT & Steel Ball bearing with internal toothing 6 pcs Comer Industry PG-3504 PR gear, 6 pcs 5.5 kw motors, motor brake on two gears 8 pes Svendborg disc brakes 0.48 /sec Svendborg Brakes BSAK 3000 MS40S On high speed shaft, 1 caliper on each of 2 brake discs knm on low speed shaft 3 blades or 2 blades and mechanical brake Tubular tower Steel 87.8 m for 93.2 m hub height KK Electronic AlS DNV Reg No: PD C.lHXN-~ Revision No: 0 Date: Page 1-3
7 DETNoRSKE VERITAS Report for Siemens Wind Power AlS SWT-3.6-\20 fot Avedore MANAGING RISK II _ Crane KK WTC-3.0 Palfinger PC 3300 compact DNV Reg No PD-&42217 I2CJHXN-5 Revision No: 0 Dale: Page 1-4
8 DNVEnergy D)\.V ::ntrgy is it leading profe,>sona\ sen'ice pro-vida in sal"guarding and improving business performance. assisting e:lergy companies along the emire value chain from conetpl selection through exploralion, production. transportation refining and distribution. OU]' broad expertise covers Assel Risk & OperaliLms \.1anagernent. enterprise Risk Management: IT Risk \lanagt'ment: Offshore Classifici1Iiou: Safe!}'. Health and Environmenta: Risk Management; TechnDlogy Qualification: and Verificatio:l. DNV Energy Regional Offices: AdJIricu and WnI.1ltrll:f, D'" Non'<. Veti\e.6lllU Del N<n<s V..186 AS R"'" Sma.,. s..tembn:> V.i~' 111/12Floor "1_'322 HDYlk 2(X15CJ.XJ5 Roo rje J_IO 8J8Zl1,,'... \'I"Ia'Ie ~~11~Slrn3.2 p,,",- "70.;' 57ll1l 00 "', AS Men Middle ellt ot!tilqq Q!!!!!lOll!rwpect!on 08I1t<l<'W V...,lim Sd'1 ElrId Doe! Ncnka V.mas 2~1!'l Floor. M8nara Woolcl Jelen Raja GrtJlan ".,m 1-kM~ Kua,,1J.mpu -, Phon&- +&IJ _ Pt>:nl-""47 ~ CIJ flll'5!!!!l _ N9Gh Afric.o -, gil!!!!" E!!!!lIy & varld.. Ott NOf8I<. V<WilllS lid Ott NI78I<e venras AS Pal.,., H_ 1/_..., 3 CslhedrII SIr...l N-,3Z2H:1,," lcndon SEI 9DE un"1id iijrlo:;lom P_' +'7 E1 57!IS CIJ Pt>Doe -<4l 2C 1~7 tiolld - 000
Siemens Wind Turbine SWT-2.3-108. The new productivity benchmark. www.siemens.com/wind
Siemens Wind Turbine SWT-2.3-108 The new productivity benchmark www.siemens.com/wind The industry standard, redefined The Siemens 2.3-MW family has firmly established itself as the tried and tested workhorse
More informationType Certification of Wind Turbines
DNV SERVICE SPECIFICATION DNV-DSS-904 Type Certification of Wind Turbines JANUARY 2012 The electronic pdf version of this document found through http://www.dnv.com is the officially binding version FOREWORD
More informationDIRECT MATCHING TO GRID WITHOUT INVERTER VARIABLE PITCH. 20/24/30 mt TOWER WITH HYDRAULIC SYSTEM YAWING SYSTEM SAFETY LEVELS PLC CONTROL
Wind turbine EW 50 Ergo Wind srl can boast of thirty years experience in the field of renewable energies as a producer of low environmental impact systems. The core business is represented by small wind
More informationWWD-1 1 MW wind turbine
Appendix 10 Technical specification 1 (18) WWD-1 1 MW wind turbine Technical specification Appendix 10 Technical specification 2 (18) Contents 1. General... 3 2. Tower... 6 3. Rotor... 6 4. 3-RR main bearing
More informationPMDD WIND TURBINE 1.5MW
1.5MW PMDD WIND TURBINE Generator Stator Rotor Blade Wind Measurement Equipment Casted Hub Auxiliary Crane Pitch System Base Frame Generator PM Rotor GOLDWIND 1.5MW PERMANENT MAGNET DIRECT-DRIVE (PMDD)
More informationV52-850 kw The turbine that goes anywhere
V2-8 kw The turbine that goes anywhere Versatile, efficient, dependable and popular The highly efficient operation and flexible configuration of the V2 make this turbine an excellent choice for all kinds
More informationENERCON WIND TURBINES
Sales ENERCON GmbH Dreekamp 5 2665 Aurich Germany Phone +49 494192 7 Fax +49 4941 92 71 9 vertrieb@enercon.de E-33 E-44 E-48 E-53 E-7 E-82 ENERCON WIND TURBINES PRODUCT OVERVIEW ENERCON GmbH Dreekamp 5
More informationLibellula 50/55 kw WIND TURBINE TECHNICAL DESCRIPTION
Sede legale: Via Giuseppe Garibaldi 63, 59100 Prato P.IVA 02110810971 Sede operativa: Via del Mandorlo 30, 59100 Prato tel. (+39) 0574 550493 fax (+39) 0574 577854 - produzione@aria-srl.it Ufficio Commerciale:
More informationSound Power measurements according to IEC 61400-11
Sound Power measurements according to IEC 61400-11 Siemens Wind Power All Rights Reserved 2011 Sound Power measurements according to IEC 61400-11 Tomas Hansen, Lars Enggaard email: trh@siemens.com Page
More informationBWEA Summary Report for the C&F Green Energy Small Wind Turbine, Model No. CF20 (Phase A)
Cleeve Road, Leatherhead Surrey, KT22 7SB UK Telephone: +44 (0) 1372 370900 Facsimile: +44 (0) 1372 370999 www.intertek.com BWEA Summary Report for the C&F Green Energy Small Wind Turbine, Model No. CF20
More informationWIND TURBINE TECHNOLOGY
Module 2.2-2 WIND TURBINE TECHNOLOGY Electrical System Gerhard J. Gerdes Workshop on Renewable Energies November 14-25, 2005 Nadi, Republic of the Fiji Islands Contents Module 2.2 Types of generator systems
More informationLecture 4 Energy Conversion in Wind Turbine
Tuuli- ja aurinkovoimateknologia ja -liiketoiminta Wind and Solar Energy Technology and Business BL20A1200 Lecture 4 Energy Conversion in Wind Turbine LUT Energia, Olli Pyrhönen Equations for energy conversion
More informationV112-3.0 MW. Your best option for low cost energy production at low and medium wind sites. Federico Gonzalez Vives. Director Technology.
V112-3.0 MW Your best option for low cost energy production at low and medium wind sites Federico Gonzalez Vives. Director Technology. Vestas MED REOLTEC. Jornadas tecnicas 17 de junio de 2010 vestas.com
More informationEXPERT REMANUFACTURED WIND TURBINE
EXPERT REMANUFACTURED WIND TURBINE Repowering Solutions is a division of Jeraneas Group of companies. Our core business is the remanufacturing of wind turbines of different sizes; a work that we have been
More informationGE Renewable Energy. GE s 3 MW Platform POWERFUL AND EFFICIENT. www.ge.com/wind
GE Renewable Energy GE s 3 MW Platform POWERFUL AND EFFICIENT www.ge.com/wind GE S 3 MW PLATFORM PITCH Since entering the wind industry in 2002, GE Renewable Energy has invested more CONTROLS than $2 billion
More informationV66 1.75 MW & V66 2.0 MW (OFFSHORE)
V66 1.75 MW & V66 2. MW (OFFSHORE) with OptiTip and OptiSpeed Offshore and onshore There are two versions of the V66 turbine: a 2. MW model for offshore sites, and a 1.75 MW model for inland locations.
More informationN60/1300 KW. Nordex N60 Long-term experience all over the world.
N60/1300 KW Nordex N60 Long-term experience all over the world. 02_03 N60/1300 kw Visualisation of a turbine in the NC2-control system. THE N60/1300 KW: ROBUST, COMPACT AND INTERNATIONALLY WELL-TESTED.
More informationGE Power & Water Renewable Energy. Digital Wind Farm THE NEXT EVOLUTION OF WIND ENERGY. www.ge.com/wind
GE Power & Water Renewable Energy Digital Wind Farm THE NEXT EVOLUTION OF WIND ENERGY www.ge.com/wind GE S DIGITAL WIND FARM PITCH Since entering the wind industry in 2002, GE Power & Water s Renewable
More informationDevelopment of 5-MW Offshore Wind Turbine and 2-MW Floating Offshore Wind Turbine Technology
Hitachi Review Vol. 63 (2014), No. 7 414 Featured Articles Development of 5-MW Offshore Wind Turbine and 2-MW Floating Offshore Wind Turbine Technology Mitsuru Saeki Ikuo Tobinaga Junichi Sugino Takashi
More informationREVIEWED BY CAPITAL PROJECTS MANAGER (DAN REDDY) GENERAL MANAGER EQUIPMENT ENGINEERING & ASSET MANAGEMENT (HAMILTON NXUMALO)
SA Port Operations DOCUMENT TYPE: REFERENCE EEAM-Q-014 (ORIGINAL SPECIFICATION HE8.2.3 Ver5) REVISION 0 SPECIFICATION TITLE: SPECIFICATION FOR ELECTRICAL MOTORS AND GENERATORS PAGE 0 of 07 COMPILED BY
More informationO-I DUBI PLANT FANS Quotation Spec Data & Specifications
TECHNICAL DATA O-I DUBI PLANT FANS Quotation Spec Data & Specifications 1 page for the global informations + 12 pages for the fans data Revision 2 end april Global informations: These fans are a replacement
More informationTYPE APPROVAL CERTIFICATION SCHEME MASS PRODUCED DIESEL ENGINES
1. Introduction TYPE APPROVAL CERTIFICATION SCHEME MASS PRODUCED DIESEL ENGINES 1.1 This scheme details the tests and inspection of diesel engines manufactured by mass production system for use in marine
More informationCase Study 5 Use of Wind Turbine Technology
Case Study 5 Use of Wind Turbine Technology 1. Context Hong Kong relies on an adequate and reliable electricity supply for its economic development. Our electricity needs are met by the two electricity
More informationSiemens 6.0 MW Offshore Wind Turbine
Published by and copyright 2011: Siemens AG Energy Sector Freyeslebenstrasse 1 91058 Erlangen, Germany Siemens Wind Power A/S Borupvej 16 7330 Brande, Denmark www.siemens.com/wind For more information,
More informationWind turbine database: Modelling and analysis with focus on upscaling. Master s thesis in the Master programme Applied Mechanics
Wind turbine database: Modelling and analysis with focus on upscaling Master s thesis in the Master programme Applied Mechanics JUAN PABLO SÁNCHEZ DE LARA GARCÍA Department of Applied Mechanics Division
More informationV47-660 kw. Pitch regulated wind turbine with OptiTip and OptiSlip
V47-660 kw Pitch regulated wind turbine with OptiTip and OptiSlip OptiSlip The V47-660 kw turbine features the unique generator principle OptiSlip, which allows both the rotor and the generator to vary
More informationOutline. Introduction to Wind Energy. US Wind Energy Installations. ME 483 Alternative Energy Engineering II 1
Wind Power Introduction February, Introduction to Wind Energy Larry Caretto Mechanical Engineering 48 Alternative Energy Engineering II February, Outline Current use of wind energy Advantages and disadvantages
More informationWIND Power Technology: IMD Integrated Motor Drive
WIND Power Technology: Pitch and Yaw Built-in Power Supply & Digital I/O Engineered-to-Application The Integrated Motor Drive, IMD, has been developed on the basis of DEIF s decades of accumulated knowhow
More informationTYPE CERTIFICATION OF WIND TURBINES
TYPE CERTIFICATION OF WIND TURBINES March 2003, rev. 9 DET NORSKE VERITAS, DANMARK A/S Building 114 Frederiksborgvej 399 P. O. Box 49 DK-4000 Roskilde Denmark Email: Wind.Turbine.Certification@dnv.com
More informationV112-3.0 MW Making wind even more profitable
V112-3.0 MW Making wind even more profitable Large rotor diameter expands your opportunities The impressive 54.65 m blades set completely new standards, making it possible to produce more energy from the
More informationBrochure. Generators for wind power Proven generators reliable power
Brochure Generators for wind power Proven generators reliable power We provide motors, generators and mechanical power transmission products, services and expertise to save energy and improve customers
More informationDocument number #12 DNS13006. Authors #20 Telephone: Date #40 AUGUST 2013
#0 INSPECTION REPORT Discipline or report series #0 Inspection VESTAS wind turbines Title #5 VESTAS WIND TURBINE #2 Report number #52 #3 Authors #20 Telephone: Date #40 AUGUST 203 Summary #60 6 UNIT VESTAS
More informationFigure 1: The existing 12 300 kw turbines with the Avedøre power plant, source [3].
HVIDOVRE OFFSHORE WIND FARM Hans Christian Sørensen SPOK ApS / Hvidovre Vindmøllelaug I/S, Blegdamsvej 4, DK 2200, Copenhagen N, Denmark, E-mail: consult@spok.dk, Phone: +45 35360219/+45 28110219, Fax:
More informationSimplified Design as Secret to higher Performance: Siemens Direct Drive Technology
Simplified Design as Secret to higher Performance: Siemens Direct Drive Technology Formatvorlage Gunnar Liehr, Head des Untertitelmasters of Sales Wind Power durch Region Klicken Central bearbeiten siemens.at/future-of-energy
More informationSweden s leading manufacturer of small-scale wind power stations!
Sweden s leading manufacturer of small-scale wind power stations! Product Information Table of content Content The company, its activities, vision and business concept. Product overview. Technology & security.
More informationPassion for Offshore. Wind Power & Renewables Division Market Unit Offshore
Wind Power & Renewables Division Market Unit Offshore Passion for Offshore - Frank Zimmermann, Head of Sales - 5 th British Chamber Conference on Renewable Energy, Hamburg, siemens.com/answers Siemens
More informationAC axial fans A series
fans series Technology ccessories E-SYSTEMS ESM Q-motor General information K series E axial E axial fans series fans fans, series Ø 00 - Ø 350 58 57 ontacts fans series, Ø 00 Material: Guard grille: Steel,
More informationThe Reliance on Wind Energy Depends on Advancements in Blade Pitch Control
INSIGHT# 2010-23MPH JULY 6, 2010 The Reliance on Wind Energy Depends on Advancements in Blade Pitch Control By Sal Spada Overview Source: GWEC Many nations are in the process of making wind power an integral
More informationST. COLUMBAN WIND PROJECT WIND TURBINE SPECIFICATIONS REPORT. Stantec File No. 160960649 June 2012. Prepared for:
ST. COLUMBAN WIND PROJECT WIND TURBINE SPECIFICATIONS REPORT Stantec File No. 160960649 June 2012 Prepared for: St. Columban Energy LP Suite 900 Livingston Place, South Tower 222-3 rd Avenue SW Calgary,
More informationWIND POWER GENERATION TECHNOLOGY Mrs. N.V. Vader Mrs. V.A. Joshi
WIND POWER GENERATION TECHNOLOGY Mrs. N.V. Vader Mrs. V.A. Joshi Abstract: The paper deals with the technical details involved in the generation of power through wind technology. It discusses the factors
More informationTYPE APPROVAL CERTIFICATE
DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE CERTIFICATE NO. E-12702 This is to certify that the Electric Motor with type designation(s) RN series 56 up to 315L Manufactured by Rotor B.V. EIBERGEN, Netherlands
More informationGE Energy Wind Technology and Windfarm Overview
GE Energy Wind Technology and Windfarm Overview Forum on Renewable Energy Development in Myanmar November 1, 2012 saumil.shah@ge.com Topics for discussion Introduction to Wind Power technology Windfarm
More informationNordex SE. Capital Markets Day Products & Sales - Lars Bondo Krogsgaard
Nordex SE Capital Markets Day Products & Sales - Lars Bondo Krogsgaard Rostock, 13 October 2011 SUMMARY The situation in the wind industry has changed: Attractive medium-term growth prospects Overcapacity
More informationMobile field balancing reduces vibrations in energy and power plants. Published in VGB PowerTech 07/2012
Mobile field balancing reduces vibrations in energy and power plants Published in VGB PowerTech 07/2012 Dr. Edwin Becker PRÜFTECHNIK Condition Monitoring PRÜFTECHNIK Condition Monitoring GmbH 85737 Ismaning
More informationvacon ac drives for mining & minerals
vacon ac drives for mining & minerals 1 strong experience in mining & minerals Vacon AC drives are robust to handle your most demanding requirements from simple ventilation to the most complex load sharing
More informationMonobuckets and the competitiveness versus monopiles and jacket structures.
Monobuckets and the competitiveness versus monopiles and jacket structures. Lars Bo Ibsen, Aalborg University, Professor. Foundation concepts for offshore Wind Turbines The Universal Foundation Carbon
More informationWind Generator. NEMO400 Instruction Manual. Suzhou Shoot Power Equipment Co., Ltd. Serial number:
Suzhou Shoot Power Equipment Co., Ltd NEMO400 Instruction Manual Wind Generator Serial number: Please read and understand this manual completely before operating the machine. 1. Introduction: This manual
More informationSiemens AG 2011 SINAMICS V60. The perfect solution for basic servo applications. Brochure May 2011 SINAMICS. Answers for industry.
The perfect solution for basic servo applications Brochure May 2011 SINAMICS Answers for industry. with 1FL5 servomotors The solution for basic servo applications There is a requirement to automate motion
More informationSIRIUX. SINGLE AND DOUBLE HIGH EFFICIENCY CIRCULATORS Heating Air-conditioning OPERATING LIMITS APPLICATIONS. 28 m 3 /h* Heads up to: Flows up to:
OPERATING LIMITS Flows up to: m /h* Heads up to: m C Max operating pressure: bars Temperature range: - à + C Max ambient temperature: + C ND of orifices: à * m /h: parallel operation SIRIUX SINGLE AND
More informationCOOLING TECHNOLOGY INSTITUTE
PAPER NO: CATEGORY: TP09-18 FANS COOLING TECHNOLOGY INSTITUTE RECENT DEVELOPMENTS IN MOTOR TECHNOLOGY ALLOW DIRECT DRIVE OF LOW SPEED COOLING TOWER FANS ROBBIE MCELVEEN BILL MARTIN RYAN SMITH BALDOR ELECTRIC
More informationLetter Report No. 100413407CRT-004 Project No. G100413407
3933 US Route 11 Cortland, NY 13045 Telephone: (607) 753-6711 Facsimile: (607) 753-1045 www.intertek.com Letter Report No. 100413407CRT-004 Project No. G100413407 Mr. Steve Turek Phone: 952-447-6064 Wind
More informationUser orientated simulation strategy to analyse large drive trains in SIMPACK
User orientated simulation strategy to analyse large drive trains in SIMPACK SIMPACK User Meeting / Dipl.-Ing. Thomas Hähnel / Dipl.-Ing. Mathias Höfgen 21. / 22. November 2007 Content Motivation, state
More informationREMOTE CONDITION MONITORING SYSTEM FOR A HYBRID WIND-DIESEL SYSTEM APPLICATION AT FERNANDO DE NORONHA ISLAND, BRAZIL
REMOTE CONDITION MONITORING SYSTEM FOR A HYBRID WIND-DIESEL SYSTEM APPLICATION AT FERNANDO DE NORONHA ISLAND, BRAZIL Gustavo de Novaes Pires Leite 2 Brazilian Wind Energy Centre, Brazil 1 gustavo.novaes@eolica.com.br
More informationQUALIFICATION OF MATERIALS AND BLADES FOR WIND TURBINES. Jakob Wedel-Heinen and Josef Kryger Tadich
Proceedings of the 27 th Risø International Symposium on Materials Science: Polymer Composite Materials for Wind Power Turbines Editors: H. Lilholt, B. Madsen, T.L. Andersen, L.P. Mikkelsen, A. Thygesen
More information1x90 TONS TENSIONERS TECHNICAL PROPOSAL. 1 X 90 Tons 30 m/min Tensioners TECHNICAL PROPOSAL JOB 08/059. 0 19/02/2008 Basic proposal PP GM SB
Pagina N.: 1 of 19 1 X 90 Tons 30 m/min Tensioners JOB 08/059 0 19/02/2008 Basic proposal PP GM SB Rev N Date Issue Description Prepared by Checked by Approved by Pagina N.: 2 of 19 TABLE OF CONTENTS:
More informationSiemens D3 platform 3.0-MW, 3.2-MW, 3.3-MW, and 3.4-MW direct drive turbines. Reduced complexity, increased profitability. siemens.
Siemens D3 platform 3.0-MW, 3.2-MW, 3.3-MW, and 3.4-MW direct drive turbines Reduced complexity, increased profitability siemens.com / wind As the major driver of innovation with more than 30 years of
More information\ srl High Technology Gear Reducers and Cardan Shafts CERTIFIED QUALITY SYSTEM: UNI ISO EN 9001:2008 ICIM 2779/2; IQNET N. IT-28236 UNIVERSAL SHAFT
UNIVERSAL SHAFT CAT CERTIFICATION CARDAN SHAFTS - COUPLINGS Alongside with the production of special gearboxes, our company has developed the production of Universal shafts, with the same high quality
More informationin-service inspections www.sgs.com
in-service inspections www.sgs.com Minimising down -time for wind turbines One of the major concerns in investing in wind farm projects is related to turbine availability, which represents the risk of
More informationWind Development in Yukon
1 Wind Development in Yukon Unique technical matters in wind development in Yukon Presentation Outline Low temperature operations Rime icing Icing mitigation and blade heating Summary - success stories
More informationTitan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com.
IS26 Concrete Spraying Machine IS26 Concrete Spraying Machine TECHNICAL SPECIFICATIONS Manipulator Max. vertical spraying reach : Max. horizontal spraying reach : Working lights : Spraying Head Rotation
More informationŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW
ŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW KODA HCW TRADITION AND EXPERIENCE The ŠKODA machine tools of different types and design have been present in the world market since the
More informationBMD. Permanent Magnet AC Synchronous Motors
BMD Permanent Magnet AC Synchronous Motors Power, control and green solutions About us 3 Bonfiglioli, one name for a large international group. It was back in 1956 that Clementino Bonfiglioli established
More informationMODERN WIND GENERATORS
MODERN WIND GENERATORS M. Ragheb 2/28/2014 INTRODUCTION An exposition of the characteristics of modern utility-scale wind generators designs from the leading manufacturers is advanced to show their components
More informationNORDEX USA, INC. GREAT LAKES SYMPOSIUM
NORDEX USA, INC. GREAT LAKES SYMPOSIUM CHICAGO 24 Sep 2013 AGENDA 1 About Nordex 2 Wind Industry Challenges & Our Responses Nordex USA, Inc. Great Lakes Symposium Presentation Chicago Sept 2013 Slide 2
More information[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining
[ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation
More informationWound Rotor Induction Motors 4-12 poles, up to 8000 kw, 11500 HP
Wound Rotor Induction Motors 4-12 poles, up to 8000 kw, 11500 HP ABB The Preferred Partner Egypt Cement Corporation, a major cement manufacturer, has chosen ABB wound rotor motors for all key applications
More informationOffer No: 156/2010. Date: December 17, 2010. Dear gentlemen,
CONSTRUCTION MACHINES PRODUCTION PAGE 1 PROMETAL S.R. Milosava Vlajića 49 11450 Sopot Serbia EUROPE Tel. +381.63.133.44.56 +381.63.8623.758 Fax +381.11.283.41.39 web site: bank: Raiffeisen Bank Serbia
More informationFluxi 2000/TZ Turbine Gas Meter
Gas Fluxi 2000/TZ Turbine Gas Meter Turbine gas meters are flow meters. The flow of gas turns a turbine wheel, and thus, the rotating speed of the turbine is proportional to the linear speed of the gas.
More information2. Crane standing on firm, horizontal ground.
The operating weight includes the basic machine with HD undercarriage, 2 main winches 300 kn with speed change gear and 11 m boom, consisting of A frame, boom foot (4 m), boom head section (6.4 m), boom
More informationDirectorate for the Built Environment Building Standards Division
Directorate for the Built Environment Building Standards Division Energy Management Solutions Ltd Investigation of measures to improve the energy performance of a existing building: Retail JUNE 2009 Report
More informationWind Energy Conversion Systems
Wind Energy Conversion Systems Lecture Notes by Prof. Shireesh B. Kedare Adjunct Assistant Professor ENERGY SYSTEMS ENGINEERING INDIAN INSTITUTE OF TECHNOLOGY, BOMBAY Powai, Mumbai 400076, INDIA Contents
More informationPLM series Permanent load lifting magnets
Lifting gear Load lifting magnets/chain hoists PLM series Permanent load lifting magnets Load-bearing capacity of up to 1 t depending on model despite light weight High standard of safety with simple lever
More informationHub North Netværksarrangement d. 14. Juni 2011
Hub North Netværksarrangement d. 14. Juni 2011 Jan Bisgaard Envision Global Innovation Centre Silkeborg, Denmark Agenda: 1. Presenting (Jan Bisgaard) 2. Company profile 3. Strategies 4. Product road map
More informationShaft grounding. Carbon brushes for shaft grounding are used in turbo-generators, in distinct AC- and DC motors and as a special application in Ships.
"Modern AC-Motors don't need carbon brushes and are maintenance free " Until some years ago this thrilling statement could be heard from motor OEM's. Nowadays SCHUNK supplies carbon brushes and brush holders
More informationQPM3 Low pressure pump for circulation of oil in hydraulic and lubricating systems
The Professional Choice in Fluid Management QPM3 Low pressure pump for circulation of oil in hydraulic and lubricating systems The Olaer Group is a global player specialising in innovative, efficient system
More informationAERODYNAMIC ANALYSIS OF BLADE 1.5 KW OF DUAL ROTOR HORIZONTAL AXIS WIND TURBINE
AERODYNAMIC ANALYSIS OF BLADE 1.5 KW OF DUAL ROTOR HORIZONTAL AXIS WIND TURBINE HITENDRA KURMI Research scholar, School of Energy and Environmental Managment,UTD, RGPV Bhopal,MP,INDIA htr.ptl@gmail.com
More informationDNVGL-CP-0393 Edition December 2015
CLASS PROGRAMME Type approval DNVGL-CP-0393 Edition December 2015 The electronic pdf version of this document, available free of charge from http://www.dnvgl.com, is the officially binding version. FOREWORD
More informationYour professional Partner also for special Miniseries & special Series.
Your professional Partner also for special Miniseries & special Series. Your professional Partner also for special Miniseries and special Series. / Page 1 Company Profile ABM Greiffenberger One of the
More informationMachine Design II Prof. K.Gopinath & Prof. M.M.Mayuram. Module 2 - GEARS. Lecture 17 DESIGN OF GEARBOX
Module 2 - GEARS Lecture 17 DESIGN OF GEARBOX Contents 17.1 Commercial gearboxes 17.2 Gearbox design. 17.1 COMMERCIAL GEARBOXES Various commercial gearbox designs are depicted in Fig. 17.1 to 17.10. These
More informationHydrostatic closed loop Bosch Rexroth. Fuel tank 180 l 180 l
R6480 RTH5.26S MACHINE MODEL ENGINE TRANSMISSION AXLES AND BRAKES PERFORMANCE WEIGHTS TANKS CAPACITIES HYDRAULIC CIRCUIT DIMENSIONS CONFORMTY TO STANDARDS Rotating telescopic forklift Maximum lifting capacity
More informationVibration measurements on future supports of mirrors M3 and M4 (ver. 1.0)
Vibration measurements on future supports of mirrors M3 and M4 (ver. 1.0) Juan Peñalver, Santiago Navarro 5-June-2014 Abstract The 30m telescope uses a Nasmyth optics system to redirect the electromagnetic
More informationGE Wind Turbine Climbing Rules and Rescue from Height
GE Wind Turbine Climbing Rules and Rescue from Height Wind Turbine Climbing Rules This material has been prepared from our GE Wind Turbine Climbing Rules and procedure. Image Place Holder Image Place Holder
More informationRaising the waters. Lift irrigation is getting a boost from ABB s synchronous motors
Raising the waters Lift irrigation is getting a boost from ABB s synchronous motors JARI LINDSTRÖM, TAPIO RAUHALA, MAGNUS REJSTRÖM In India, the scarcity of water is unfortunately a harsh reality. Still,
More informationFlux Conference 2012. High Efficiency Motor Design for Electric Vehicles
Flux Conference 2012 High Efficiency Motor Design for Electric Vehicles L. Chen, J. Wang, P. Lombard, P. Lazari and V. Leconte University of Sheffield, Date CEDRAT : 18 October 2012 Presented by: P. Lazari
More informationTransformer oil cooler ALFA A02
A02 Transformer oil cooler ALFA Transformer oil cooler ALFA The transformer oil cooler ALFA is used to cool power transformers by means of forced air and oil flow. The oil in the cooler is circulated using
More informationGE Energy 1.5MW. Wind Turbine
GE Energy 1.5MW Wind Turbine The industry workhorse The world needs a reliable, affordable and clean supply of electric power with zero greenhouse gas emissions, which is why GE continues to drive investment
More informationQuality Guide. CJC Quality Guide Vol. 7 April 2015 1
Quality Guide CJC Quality Guide Vol. 7 April 2015 1 CJC Quality Guide An introduction to C.C.JENSEN A/S Quality Guide It is important that our customers know what C.C.JENSEN A/S stands for when talking
More informationDUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 00HT / 00MC Slant Bed, High Precision CNC Lathes www.dugard.com Dugard 00HT / 00MC Hydraulic Tailstock Quill can be controlled by programme or manually, auto sensing
More informationHCM434F - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
HCM434F - Winding 311 Technical Data Sheet HCM434F SPECIFICATIONS & OPTIONS STANDARDS Marine generators may be certified to Lloyds, DnV, Bureau Veritas, ABS, Germanischer-Lloyd or RINA. Other standards
More informationWind Energy Math Calculations Calculating the Tip Speed Ratio of Your Wind Turbine
Wind Energy Math Calculations Calculating the Tip Speed Ratio of Your Wind Turbine The Tip Speed Ratio (TSR) is an extremely important factor in wind turbine design. TSR refers to the ratio between the
More informationIPS Inboard performance system. Volvo Penta IPS, the future for fast vessels
IPS, the future for fast vessels 1 dec 2010 Save fuel and reduce environmental impact 2 dec 2010 Best efficiency with Contra Rotating propellers Double blade area means smaller prop diameter for same output
More informationSTRATEGY FOR WIND TURBINE COMPONENTS AND SUBSYSTEMS
REPORT FROM MEGAVIND NOVEMBER 2012 STRATEGY FOR WIND TURBINE COMPONENTS AND SUBSYSTEMS TABLE OF CONTENT 1. PREFACE...3 2. VISION AND TARGET...4 2.1 Focus and delimitation...5 3. STRATEGIC RECOMMENDATIONS...7
More informationSTOUCO Drilling Equipment
STOUCO Drilling Equipment Auxiliary Pipe Handling System Type :Stouco.APHS.H.50.C.6 SWL : 5 T travel speed : 0 30 m/min (0-98 ft/min) travel mode : AFT to FWD / FWD to AFT travel distance : ~17 mtr Lift
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61400-1 Second edition 1999-02 Wind turbine generator systems Part 1: Safety requirements Aérogénérateurs Partie 1: Spécifications de sécurité IEC 1999 Copyright - all rights
More informationPermanent Magnetic Generator Construction Manual
Permanent Magnetic Generator Construction Manual http://hojomotor.com Our Team Doing an On-site Assembly in Peru http://hojomotor.com Section 1) Introduction This manual describes how to build a 'permanent
More informationGenerators TEM. for small hydroelectric power stations. Electric Machines
Generators for small hydroelectric power stations TEM Electric Machines Advanced solutions for the cleanest energy Reputable manufacturer of generators for small hydroelectric power stations TED Electric
More informationPermanent Magnet Technology within Direct Drive Cooling Tower Motors Creates System Energy Savings
Permanent Magnet Technology within Direct Drive Cooling Tower Motors Creates System Energy Savings Roman Wajda, Robbie McElveen, Bill Martin, and Steve Evon, Baldor Electric Company ABSTRACT At a time
More informationEC medium pressure axial fans. The effi cient system solution.
EC medium pressure axial fans. The effi cient system solution. GreenTech EC technology in a new dimension. Thanks to the new axial fans, our highly effi cient GreenTech EC technology is now available for
More informationPM734F - Technical Data Sheet Winding 28
- Technical Data Sheet Winding 28 SPECIFICATIONS & OPTIONS STANDARDS STAMFORD AC generators are designed to meet the performance requirements of IEC EN 60034-1. Other international standards, including
More informationManaging Wind Farms in the San Gorgonio Pass
Feature AES Wind Generation Managing Wind Farms in the San Gorgonio Pass Palm Springs, California Photography by Christine Coates, Editor, Wind Today Wind farms in the San Gorgonio Pass near Palm Springs,
More information