Experion HS. Quick Builder Patch 3 R410. Software Change Notice

Transcription

1 Experion HS Quick Builder Patch 3 R410 Software Change Notice Revision Date: October 3, 2013

2 Notices and Trademarks Honeywell International Inc All Rights Reserved. While this information is presented in good faith and believed to be accurate, Honeywell disclaims the implied warranties of merchantability and fitness for a particular purpose and makes no express warranties except as may be stated in its written agreement with and for its customer. In no event is Honeywell liable to anyone for any indirect, special or consequential damages. The information and specifications in this document are subject to change without notice. Honeywell PlantScape, Experion, and TotalPlant are US registered trademarks of Honeywell International Inc. Other brand or product names are trademarks of their respective owners. Honeywell Process Solutions 1860 West Rose Garden Lane Phoenix, AZ USA HS R410 Quick Builder Patch 3 Software Change Notice ii

3 Support and Other Contacts United States and Canada Contact: Phone: Facsimile Mail: Honeywell Solution Support Center Calls are answered by dispatcher between 6:00 am and 4:00 pm Mountain Standard Time. Emergency calls outside normal working hours are received by an answering service and returned within one hour Honeywell TAC, MS L W. Rose Garden Lane Phoenix, AZ, USA Europe, Middle East, and Africa (EMEA) Pacific India Contact: Phone: Facsimile Mail: Contact: Phone: Facsimile Mail: Contact: Phone: Facsimile Mail: Honeywell TAC EMEA TAC-BE02 Hermes Plaza Hermeslaan, 1H B-1831 Diegem, Belgium Honeywell Global TAC Pacific (toll free within Australia) (outside Australia) Honeywell Limited Australia 5 Kitchener Way Burswood, WA, 6100, Australia GTAC@honeywell.com Honeywell Global TAC India / Honeywell Automation India Ltd 56 and 57, Hadapsar Industrial Estate Hadapsar, Pune , India Global-TAC-India@honeywell.com HS R410 Quick Builder Patch 3 Software Change Notice iii

4 Korea Contact: Phone: Facsimile Mail: People s Republic of China Contact: Phone: Mail: Singapore Japan Contact: Phone: Facsimile Mail: Contact: Facsimile Mail: World Wide Web Honeywell Global TAC Korea (toll free within Korea) Honeywell Co., Ltd 4F, Sangam IT Tower B4-4 Block 1590, DMC Sangam-dong, Mapo-gu Seoul, , Korea Global-TAC-Korea@honeywell.com Honeywell Global TAC China Honeywell (China) Co., Ltd 33/F, Tower A, City Center, 100 Zunyi Rd. Shanghai , People s Republic of China Global-TAC-China@honeywell.com Honeywell Global TAC South East Asia Honeywell Private Limited Honeywell Building 17, Changi Business Park Central 1 Singapore GTAC-SEA@honeywell.com Honeywell Global TAC Japan Honeywell K.K New Pier Takeshiba, South Tower Building 20th Floor, Kaigan, Minato-ku Tokyo , Japan Global-TAC-JapanJA25@honeywell.com Honeywell Process Solutions website: Training classes: Honeywell holds technical training classes on Experion. These classes are HS R410 Quick Builder Patch 3 Software Change Notice iv

5 taught by experts in the field of process control systems. For more information about these classes, contact your Honeywell representative, or see HS R410 Quick Builder Patch 3 Software Change Notice v

6 Symbol Definitions The following table lists those symbols used in this document to denote certain conditions. Symbol Definition ATTENTION: Identifies information that requires special consideration. HS R410 Quick Builder Patch 3 Software Change Notice vi

7 Revision history Version Description V1 First version of the SCN HS R410 Quick Builder Patch 3 Software Change Notice ii

8 Table of Contents 1 Introduction About the document About the patch Problems resolved Issues Limitations Before you begin Prerequisites Patch installation or migration checklist Applicable nodes Applicable modules Supported controller migration paths Verify the present version on the node Copying and extracting the patch Change impact Control change impact Operational change impact Infrastructure change impact Patch installation Installing the patch on Non-Redundant Server and Console Station Systems To stop the services To install the patch To validate the patch installation Post-installation tasks Installing the patch on Redundant Server Systems To stop the services To install the patch To validate the patch installation Post-installation tasks Installing the patch on Flex Station or Console Extension Station To stop the services...16 HS R410 Quick Builder Patch 3 Software Change Notice iii

9 2.3.2 To install the patch To validate the patch installation Post-installation tasks Migrating controllers Troubleshooting issues during installation Patch removal Removing the patch from Non-Redundant Server and Console Station Systems To stop the services To remove the patch To validate the patch removal Post-removal tasks Removing the patch from Redundant Server Systems To stop the services To remove the patch To validate the patch removal Post-removal tasks Removing the patch from Flex Station or Console Extension Station To stop the services To remove the patch To validate the patch removal Post-removal tasks Additional information Additional information to validate patch installation Files added or replaced Firmware revision...22 HS R410 Quick Builder Patch 3 Software Change Notice iv

10 1 Introduction 1.1 About the document The Software Change Notice describes the prerequisites, resolved PARs, applicable nodes, and steps to install/uninstall the patch. Additionally, the SCN contains information about the change impact and additional information for this patch. The latest version of this SCN is always available on the Honeywell Process Solutions website. 1.2 About the patch This patch addresses problems and offers improvements requested since the release of Experion R It can be installed on Experion HS R410.1 systems Problems resolved This patch resolves the following issues. Applicable only if required for systems needing the enhancement PAR Subsystem Description of problem 1-YX831K Download/Export When requested to present user credential for downloading, user can cancel log on dialog and still download successfully. 1-WQCHIL Download/Export Default download option should be "Download Modified Items" instead of "Download All". 1-PCIVB9 Property Sheets Enhancement to the addressing range for the HC900 Universal Modbus Interface to allow access to 32k addresses using a single virtual controller. 1-URNA7T Property Sheets Need to be able to configure Control Inhibit and Journal Only flags for a point from Quick Builder Issues This patch does not have any known issues. HS R410 Quick Builder Patch 3 Software Change Notice 10

11 1.2.3 Limitations Patch removal [ ] Automatic [ ] Can be done manually during next upgrade [ ] Must be done manually before next upgrade Patch distribution [ ] Not Limited [ ] Limited for: Localization [ ] Not impacted [ ] Patch may contain strings in English. A Localization version to be included in the next release. [ ] Needs additional localization support Cumulative patch [ ] Yes. See Prerequisites [ ] No 1.3 Before you begin Prerequisites The patch must be installed on a node on which the following updates are installed: Experion HS R Patch installation or migration checklist Task order Task Reference 1 Prerequisites See section Prerequisites 2 Applicable nodes See section Applicable nodes 3 Installing the patch See section Patch installation Applicable nodes This patch is applicable for the following nodes. Node Is the patch applicable? HS R410 Quick Builder Patch 3 Software Change Notice 11

12 Node Is the patch applicable? Experion Server (ESV) Flex Station (ES-F) Yes Yes Applicable modules This patch is applicable for the following modules. Node Is the patch applicable? C200 controller C200E controller C300 controller Fieldbus Interface Module Fieldbus Interface Module 4 Fieldbus Interface Module 8 Fault Tolerant Ethernet Bridge Module (FTEB) Serial I/O Module (IOM) Legacy I/O Module (LIOM) PROFIBUS Gateway Module (PGM) SeriesC IO Module No No No No No No No No No No No Supported controller migration paths N/A Verify the present version on the node To verify the present version on the node, perform the following steps. 1. Start Quick Builder 2. Click Help-> About, ensure current version is 4.00 build 289 HS R410 Quick Builder Patch 3 Software Change Notice 12

13 1.3.7 Copying and extracting the patch Copy the software patch package to a temporary directory on the node where install is applicable. There are 3 files in the patch package: ApplyUpdate.bat ApplyUpdate.vbs Experion_R410_QBP_Patch3.msp 1.4 Change impact After the installation of this patch the following changes are expected Control change impact No impact Operational change impact No impact Infrastructure change impact No impact. HS R410 Quick Builder Patch 3 Software Change Notice 13

14 2 Patch installation Patch Installation will require the user to log on to the system using an account with membership in the Windows administrators group. 2.1 Installing the patch on Non-Redundant Server To stop the services 1. Ensure no instances of Quick Builder are running and qckbld folder is closed. 2. If you are running in the node of Remote Engineering and Station Server, you may need to open Task Manager and check there is no instance of qckbld.exe running for all users. 3. Start the Experion PKS Services Control Panel program (from <install_drive>\program Files (x86)\honeywell\experion PKS\Utilities\SSServices\SSServices.exe). Once started, select Stop All services and click OK to stop all Experion services To install the patch 1. Navigate to the software patch package in Windows Explorer and right-click ApplyUpdate.bat and select Run as administrator. The software patch installer will start and installation wizard appears. 2. If User Account Control dialog box appears, click Yes 3. Choose OK button after apply update QBP Patch3 dialog appears. 4. Follow the prompts and complete the wizard. The install may take a few minutes. 5. Click OK to close the dialog. Notes: If the software patch installer reports that some programs must be closed before installing, click OK to accept this and let the installer to terminate these programs. Otherwise, click Cancel to abort installation To validate the patch installation To verify the successful installation of the patch: 1. Using Notepad, open the ProductVersion.txt file located in the following path: C:\Program Files (x86)\honeywell\experion PKS\ProductVersion.txt 2. Verify that the file contains an entry starting with: HS R410 Quick Builder Patch 3 Software Change Notice 14

15 ++ Patch Experion PKS R410 QBP patch3 installed on <install date & time> Post-installation tasks 1. Start all Experion services. 2. Run Quick Builder from Configuration Studio and the migration wizard will appear. Follow the wizard instructions and the database will be migrated to the latest version. 2.2 Installing the patch on Redundant Server Systems To stop the services 1. Ensure the Primary and Backup Server databases are synchronized before proceeding 2. Ensure Quick Builder is not running on any nodes and ensure not to run Quick Builder on any nodes before finishing the patch installation on both primary and backup servers To install the patch 1. On the backup server, run the software patch installation procedure for a non-redundant server system 2. Synchronize primary and backup server databases 3. Fail over the primary server to the backup server. The backup server will become primary and the primary server become backup 4. Run the software patch installation procedure for a non-redundant server system on the new backup server 5. Synchronize primary and backup server databases To validate the patch installation To verify the successful installation of the patch: 1. Using Notepad, open the ProductVersion.txt file located in the following path: C:\Program Files (x86)\honeywell\experion PKS\ProductVersion.txt 2. Verify that the file contains an entry starting with: ++ Patch Experion PKS R410 QBP patch3 installed on <install date & time> Post-installation tasks Run Quick Builder from Configuration Studio and the migration wizard will appear. Follow the wizard instructions and the database will be migrated to the latest version. HS R410 Quick Builder Patch 3 Software Change Notice 15

16 2.3 Installing the patch on Flex Station To stop the services 1. Ensure no instances of Quick Builder are running and qckbld folder is closed. 2. If you are running in the node of Remote Engineering and Station Server, you may need to open Task Manager and check there is no instance of qckbld.exe running for all users. 3. Start the Experion PKS Services Control Panel program (from <install_drive>\program Files (x86)\honeywell\experion PKS\Utilities\SSServices\SSServices.exe). Once started, select Stop All services and click OK to stop all Experion services To install the patch 1. Navigate to the software patch package in Windows Explorer and right-click ApplyUpdate.bat and select Run as administrator. The software patch installer will start and installation wizard appears. 2. If User Account Control dialog box appears, click Yes 3. Choose OK button after apply update QBP Patch3 dialog appears. 4. Follow the prompts and complete the wizard. The install may take a few minutes. 5. Click OK to close the dialog. Notes: If the software patch installer reports that some programs must be closed before installing, click OK to accept this and let the installer to terminate these programs. Otherwise, click Cancel to abort installation To validate the patch installation To verify the successful installation of the patch: 1. Using Notepad, open the ProductVersion.txt file located in the following path: C:\Program Files (x86)\honeywell\experion PKS\ProductVersion.txt 2. Verify that the file contains an entry starting with: ++ Patch Experion PKS R410 QBP patch3 installed on <install date & time> HS R410 Quick Builder Patch 3 Software Change Notice 16

17 Post-installation tasks 1. Start all Experion services. 2. Run Quick Builder from Configuration Studio and the migration wizard will appear. Follow the wizard instructions and the database will be migrated to the latest version. 2.4 Migrating controllers N/A 2.5 Troubleshooting issues during installation None HS R410 Quick Builder Patch 3 Software Change Notice 17

18 3 Patch removal 3.1 Removing the patch from Non-Redundant Server To stop the services 1. Ensure no instances of Quick Builder are running and qckbld folder is closed. 2. If you are running in the node of Remote Engineering and Station Server, you may need to open Task Manager and check there is no instance of qckbld.exe running for all users. 3. Start the Experion PKS Services Control Panel program (from <install_drive>\program Files (x86)\honeywell\experion PKS\Utilities\SSServices\SSServices.exe). Once started, select Stop All services and click OK to stop all Experion services To remove the patch 1. Navigate to Start -> All Programs -> Honeywell Experion PKS, select the Maintenance Tool and run same with Administrator privilege. 2. Click on View\Uninstall Experion Updates 3. Locate the patch to uninstall and click on the Remove button. 4. Follow the prompts on screen to uninstall the patch. 5. Once the uninstallation completed, an uninstallation successfully completed dialog box will popup. 6. If prompted, restart the machine To validate the patch removal To verify the successful un-installation of the patch: 1. Using Notepad, open the ProductVersion.txt file located in the following path: C:\Program Files (x86)\honeywell\experion PKS\ProductVersion.txt 2. Verify that the file contains an entry starting with: -- Patch Experion PKS R410 QBP patch3 uninstalled on <install date & time> 3. Make sure Quick Builder version is rolled back to 4.00 build 289. HS R410 Quick Builder Patch 3 Software Change Notice 18

19 3.1.4 Post-removal tasks None 3.2 Removing the patch from Redundant Server Systems To stop the services 1. Ensure the Primary and Backup Server databases are synchronized before proceeding. 2. Ensure Quick Builder is not running on any nodes and ensure not to run Quick Builder on any nodes before finishing the patch installation on both primary and backup servers To remove the patch 1. On the backup server, run the software patch un-installation procedure for a nonredundant server system. 2. Synchronize primary and backup server databases. 3. Fail over the primary server to the backup server. The backup server will become primary and the primary server become backup. 4. Run the software patch un-installation procedure for a non-redundant server system on the new backup server. 5. Synchronize primary and backup server databases To validate the patch removal To verify the successful un-installation of the patch: 1. Using Notepad, open the ProductVersion.txt file located in the following path: C:\Program Files (x86)\honeywell\experion PKS\ProductVersion.txt 2. Verify that the file contains an entry starting with: -- Patch Experion PKS R410 QBP patch3 uninstalled on <install date & time> 3. Make sure Quick Builder version is rolled back to 4.00 build Post-removal tasks None HS R410 Quick Builder Patch 3 Software Change Notice 19

20 3.3 Removing the patch from Flex Station To stop the services 1. Ensure no instances of Quick Builder are running and qckbld folder is closed. 2. If you are running in the node of Remote Engineering and Station Server, you may need to open Task Manager and check there is no instance of qckbld.exe running for all users. 3. Start the Experion PKS Services Control Panel program (from <install_drive>\program Files (x86)\honeywell\experion PKS\Utilities\SSServices\SSServices.exe). Once started, select Stop All services and click OK to stop all Experion services To remove the patch 1. Navigate to Start -> All Programs -> Honeywell Experion PKS, select the Maintenance Tool and run same with Administrator privilege. 2. Click on View\Uninstall Experion Updates. 3. Locate the patch to uninstall and click on the Remove button. 4. Follow the prompts on screen to uninstall the patch. 5. Once the uninstallation completed, an uninstallation successfully completed dialog box will popup. 6. If prompted, restart the machine To validate the patch removal To verify the successful un-installation of the patch: 1. Using Notepad, open the ProductVersion.txt file located in the following path: C:\Program Files (x86)\honeywell\experion PKS\ProductVersion.txt 2. Verify that the file contains an entry starting with: -- Patch Experion PKS R410 QBP patch3 uninstalled on <install date & time> 3. Make sure Quick Builder version is rolled back to 4.00 build 289. HS R410 Quick Builder Patch 3 Software Change Notice 20

21 3.3.4 Post-removal tasks None HS R410 Quick Builder Patch 3 Software Change Notice 21

22 4 Additional information 4.1 Additional information to validate patch installation Files added or replaced All files in C:\Program Files(x86)\Honeywell\Experion PKS\client\qckbld are replaced by this patch Firmware revision N/A HS R410 Quick Builder Patch 3 Software Change Notice 22

23 Honeywell International Process Solutions 1860 West Rose Garden Lane Phoenix, AZ USA