BG Millag ApS Egegårdsvej 5 DK-5260 Odense S Tlf.: info@millag.dk

Size: px

Start display at page:

Download "BG Millag ApS Egegårdsvej 5 DK-5260 Odense S Tlf.: +45 88 61 26 00 info@millag.dk www.m"

Byron Cameron
8 years ago
Views:

4 . BG Millag ApS Egegårdsvej 5 DK-5260 Odense S Tlf.: info@millag.dk

5 ACCREDITED UNIT: DET NORSKE VERITAS, BUSINESS ASSURANCE, DANMARK A/S, TUBORG P ARKVEJ 8, 2., DK-2900, HELLERUP, DANMARK, TEL: , Locations in The audit has been performed under the supervision of: DNV BU APPEND This appendix refers DNV BUSINESS ASSURANCE MANAGEMENT SYSTEM CERTIFICATE BG Millag ApS Egegårdsvej 5 DK-5260 Odense S Tlf.: info@millag.dk Certificate No AQ-DEN-DANAK This is to certify that Byggros A/S Egegårdsvej 5, DK-5260 Odense S, Denmark has been found to conform to the management system standard: DS/EN ISO 9001:2008 This certificate is valid for the following product or service ranges: Product development, production and marketing of a wide assortment of related products for the industry and building and construction business This certificate is valid until: The audit has been performed under the supervision of: Steen Djursgård Lead Auditor Locations included in the certification will appear in the appendix. DANAK SYSTEM Reg.nr Place and date: Hellerup, DET NORSKE VERITAS, BUSINESS ASSURANCE, DANMARK A/S Anders Lindgren Managing Director Lack of fulfilment of conditions as set out in the Certification Agreement may render th is certificate invalid. DNV BUSINESS ASSURANCE APPENDIX TO CERTIFICATE This appendix refers to certificate no AQ-DEN-DANAK Byggros A/S Locations included in the certification are as follows: Site Name Address Byggros A/S (HQ) Egegårdsvej 5, DK-5260 Odense S BG Byggros AB Levins väg 4, S Byggros AS Solli, N-0203 Oslo BG Biovarme ApS Egegårdsvej 5, DK-5250 Odense S BG Burcharth A/S Egegårdsvej 5, DK-5250 Odense S Byggros Miljøteknik/Inja Miljøteknik Egegårdsvej 5, DK-5250 Odense S Millag ApS Egegårdsvej 5, DK-5250 Odense S This certificate is valid until: The audit has been performed under the supervision of: DANAK SYSTEM Reg.nr Place and date: Hellerup, DET NORSKE VERITAS, BUSINESS ASSURANCE, DANMARK A/S Steen Djursgård Anders Lindgren Lead Auditor Managing Director Lack of fulfilment of conditions as set out in the Certification Agreement may render th is certificate invalid. Site Name ACCREDITED UNIT: DET NORSKE VERITAS, BUSINESS ASSURANCE, DANMARK A/S, TUBORG P ARKVEJ 8, 2., DK-2900, HELLERUP, DANMARK, TEL: , Byggros A/S (HQ) BG Byggros AB Byggros AS BG Biovarme ApS BG Burcharth A/S Byggros Miljøteknik/Inja Miljøteknik Millag ApS This certificate is valid until:

Odense S Tlf.: +45 88 61 26 00 info@millag.dk www.millag.dk Certificate No.

6 Dukelská 417, Dvůr Králové n. L. 110 (160) DK-5260 Odense S > 15 Czech Republic - EU 22 (G/standard sand) Internet pejchal@juta.cz JUNIFOL PELLD SL geosynthetic barriers 90 to tensile strength of non-welded geomembrane) Phone Fax Characteristics required for use in the construction of: liquid waste disposal sites, transfer stations or secondary containment according to EN solid waste storage and disposal sites according to EN BG Millag ApS Egegårdsvej 5 DK-5260 Odense S Gregersensvej DK-2630 Taastrup Tel Fax JUNIFOL PELLD SL Characteristic Test Method Unit 1,0 1,5 Material DSC analysis PE-LLD Surface G/G (smooth / smooth) - 30 PHYSICAL PROPERTIES Width EN m 5,1 or 8,0 Thickness EN mm 1,0 ±0,10 1,5 ±0,15 Density EN ISO 1183 g/cm 3 0,939 Dimensional stability EN % ± 2 HYDRAULIC PROPERTIES 17 March 2015 fgu-fhgs/eta info@teknologisk.dk Approval of products according to DS/INF JUN Permeability to liquids EN m 3 /(m 2.d) 1,5 E-06 Gas permeability ASTM D 1434 mol/(m 2.d) 4,60 E-03 MECHANICAL PROPERTIES Tensile strength EN ISO 527-1,3 2 N/mm 30 / 30 MD/CMD Specimen impacts of weathering factors (UV radiation in particular): Type 5 Elongation (extensometer) Velocity % 800 / 800 MD/CMD 100 mm/min roduct to be durable and resistant for at least 30 years Puncture resistance EN ISO kn 3,0 3,5 N/mm Tear strength ISO 34-1 with an annual amount of sun radiation (N) (105) up to 120 (160) kly; Burst strength EN % > 15 ther regions, please, contact the producer) Friction characteristics - direct shear test EN ISO degree 22 (G/standard sand) Seam strength 90 DVS % shear test (compared to tensile strength of non-welded geomembrane) THERMICAL PROPERTIES uction of tensile strength Foldability at low and EN elongation: C - 30 temperature DURABILITY AND CHEMICAL RESISTANCE < 25 % of original values if exposed to direct impacts of weathering factors (UV radiation in particular): Resistance to we predict the product to be durable and resistant for at least 30 years EN weathering (valid for regions with an annual amount of sun radiation up to 120 kly; for other regions, please, contact the producer) Resistance to oxidation OTHER PROPERTIES EN JUNIFOL PELLD SL reduction of tensile strength and elongation: < 25 % of original values Carbon black content EN ISO % Above mentioned data are average values and of informative character only. The manufacturer reserves the right to alter the specifications without prior notice. It is the responsibility of all users to satisfy themselves that the above specifications are current. The product as per this material data sheet has been designed in conjunction with BG Millag ApS, Egegårdsvej 5, DK-5260, Odense S, Denmark erves the right to alter the specifications without prior notice. It gegårdsvej 5, DK-5260, Odense S, Denmark Version: Technical data Approval of products according to DS/INF JUNIFOL PELLD SL Assessment and examination of the below products for the purpose of approval according to DS/INF 466, 1 st edition , Sanitary landfill liners. Welded samples and liner samples have been received here on 26 February According to the client, the liner type JUNIFOL PELLD SL has been manufactured in cooperation with JUTA and Millag ApS. The following two products have been assessed and examined: JUNIFOL PELLD SL, 1.0 mm JUNIFOL PELLD SL, 1.5 mm Testing of liner and weldings In order to assess the liners according to DS/INF 466, 1 st edition , Sanitary landfill liners and related data sheet for JUNIFOL PELLD SL, we have carried out the following supplementary measurements: 1. testing of the weld seam strength of 1.0 and 1.5 mm liners with welding 2. Tear resistance according to ISO 6383/1 3. Puncture resistance according to FTMS No.101 C Method 2031 (1980) 4. Visual assessment of the liner Summary Based on an evaluation/assessment of the data sheet and testing of welded samples delivered by Millag ApS, the following 2 liners: JUNIFOL PELLD SL, 1.0 mm JUNIFOL PELLD SL, 1.5 mm Assessment and examination of the below products to DS/INF 466, 1 st edition , Sanitary landf Welded samples and liner samples have been receiv According to the client, the liner type JUNIFOL PELLD operation with JUTA and Millag ApS. The following two products have been assessed and JUNIFOL PELLD SL, 1.0 mm JUNIFOL PELLD SL, 1.5 mm Testing of liner and weldings In order to assess the liners according to DS/INF 466 fill liners and related data sheet for JUNIFOL PELLD S supplementary measurements: fulfil the requirements in DS/INF 466, 1 st edition , point testing of the weld seam strength of 1.0 and 2. Tear resistance according to ISO 6383/1 3. Puncture resistance according to FTMS No.1 4. Visual assessment of the liner \\dfsd06\organization\c035\kom.opg. - test og analyse - plast\bg millag\2015\ vurdering af junifol pelld sl\brv-dk1-uk.docx Summary Technical data Based on an evaluation/assessment of the data shee ered by Millag ApS, the following 2 liners: JUNIFOL PELLD SL, 1.0 mm JUNIFOL PELLD SL, 1.5 mm fulfil the requirements in DS/INF 466, 1 st edition 199 \\dfsd06\organization\c035\kom.opg. - test og analyse - plast\bg millag\2015\63

waste disposal sites, transfer stations or secondary containment according to EN 13492 solid waste storage and disposal sites according to EN 13493 BG Millag ApS Egegårdsvej 5 DK-5260 Odense S

7 BG Millag ApS Egegårdsvej 5 DK-5260 Odense S Tlf.: info@millag.dk

8 我们的工地遍布全球

Naue GmbH&Co.KG. Quality Control and. Quality Assurance. Manual. For Geomembranes

Naue GmbH&Co.KG. Quality Control and. Quality Assurance. Manual. For Geomembranes Naue GmbH&Co.KG Quality Control and Quality Assurance Manual For Geomembranes July 2004 V.O TABLE OF CONTENTS 1. Introduction 2. Quality Assurance and Control 2.1 General 2.2 Quality management acc. to