Engineering Outreach UNIVERSITY OF IDAHO CATALOG SPRING 2015

Transcription

1 Engineering Outreach UNIVERSITY OF IDAHO CATALOG SPRING 2015 Professional Online Education

2 Engineering Spring 2015 September 1 Application priority deadline for spring 2015 graduate admission; see November 10 Spring 2015 registration opens; see December 19 Last day to apply for spring graduation without a late fee; see January 14 Spring 2015 classes begin Last day to register for spring 2015 EO courses (without a late fee) View online sessions and course materials at the EO Portal: eo.uidaho.edu/portal 15 Late payment fees begin 19 Martin Luther King/Human Rights Day university closed Moscow campus Contact us! eo.uidaho.edu Local: (208) Toll-free: (800) outreach@uidaho.edu On the cover photo description: University of Idaho Life Sciences Building University of Idaho Catalog, Vol. 110, No. 5 November 2014 The University of Idaho Catalog (USPS ) is published five times per year. Published twice in April, once in June, October and November by the University of Idaho Office of the Registrar, Engineering Outreach and Independent Study in Idaho, 875 Perimeter Dr., MS 4260, Moscow, Idaho Periodicals postage paid at Moscow Idaho Postmaster: Send address changes to: University of Idaho, Engineering Outreach, 875 Perimeter Dr MS 1014, Moscow, ID Last day to register or add a course on VandalWeb Last day to register or add without a petition 28 Last day to change to pass/fail grading option Last day to drop or change to audit without receiving a W Last day to receive 100 percent refund of course fees No refunds after January Late payment fees increase; see eo.uidaho.edu/fees for details February 1 Application priority deadline for fall 2015 graduate admission; see 16 Presidents Day university closed

3 Outreach Calendar March Spring Recess no classes all week; university remains open 30 Summer 2015 registration opens; see April 3 Last day to withdraw or change to audit 20 Fall 2015 registration opens; see May Final Exam Week 15 Spring 2015 semester ends Course completion deadline for spring 2015 EO courses, 3 p.m. Pacific Standard Time Last day to apply for fall 2015 graduation without a late fee; see 16 Spring Commencement 24 EO Portal closes download any sessions, graded materials or exams by end of the day 25 Memorial Day university closed June 15 Summer 2015 classes begin Last day to register for summer 2015 EO courses (without a late fee) August 24 Fall 2015 classes begin Last day to register for fall 2015 EO courses (without a late fee) SPRING 2015 CONTENTS Calendar...(inside front cover) Why Choose Our Program?...2 Engineering Outreach...3 Master s Degree Programs...3 Focus Areas...3 Academic Certificates...3 Admission...4 New EO Student Checklist...4 Registration and Fees...5 NetID Account...6 What s New: EO Goes HD...7 Exam Process...8 Course Delivery...9 Course Completion...9 Finding the CRN...10 Spring 2015 Courses Accounting Business Civil Engineering...12 Computer Science...12 Electrical and Computer Engineering...13 Engineering General Engineering Management Geological Engineering...18 Materials Science and Engineering...18 Mathematics...18 Mechanical Engineering Nuclear Engineering...21 Statistics...21 Technology Management Wildlife Resources Academic Departments EO Contact Information List of Spring 2015 Courses... (inside back cover) 1

4 Quality Programs. Innovative Delivery! Why Choose Our Program? Our Mission The University of Idaho considers outreach an integral responsibility. Engineering Outreach s mission is to serve off-campus students, business and industry by providing quality programs with innovative delivery. Our Quality Programs Engineering Outreach offers complete master s degrees, academic certificates and coursework for transfer credit in engineering and related fields. EO is an established distance education program with 40 years of experience delivering courses to off-campus students. The University of Idaho is a member of the Association of Public Land Grant Universities (APLU) and is regionally accredited by the Northwest Commission on Colleges and Universities (NWCCU). More than 95 percent of EO students complete their courses, and reenrollment rates each semester for graduate students are high. EO is approved by the U.S. Department of Veterans Affairs (VA) for U.S. military students. Engineering graduate programs are supported by undergraduate degree programs that are accredited by the Engineering Accreditation Commission of ABET, 2 Our Innovative Delivery Course sessions are delivered in a high-resolution proprietary online digital format. Graded coursework is accessible online through a secure portal. More than 70 continually updated courses are delivered each fall and spring semester. Sessions are posted online within two hours of being encoded. Secure online access is available for course-related communication. EO has one of the university s most popular websites; it is easily navigated and updated on a daily basis. Our Commitment to Student Success EO offers consistent and personalized student support services with responsive staff committed to meeting the educational needs of students, accessible by telephone, and live chat. University resources, student services and academic advising are available to all EO students.

5 Engineering Outreach eo.uidaho.edu About Us Engineering Outreach is a University of Idaho College of Engineering distance education program. It was established in 1975 to meet the educational needs of Idaho s just-developing high-tech industry. EO s first courses were delivered on videotape to regional corporations and libraries. Today, EO students worldwide are earning master s degrees, academic certificates, and transfer credits completely online. The University of Idaho, located in Moscow, Idaho, was established in 1889 and currently has more than 10,000 students. The university is an internationally recognized land-grant institution that combines research, graduate and professional education with a strong undergraduate base in the liberal arts and sciences. Visit edu for more information. Accreditation/Affiliations The University of Idaho is a member of the Association of Public Land Grant Universities (APLU) and is regionally accredited by the Northwest Commission on Colleges and Universities (NWCCU). College of Engineering graduate programs are supported by its undergraduate programs, which are accredited by the Engineering Accreditation Commission of ABET, These programs include Biological and Agricultural Engineering (B.S.B.A.E.), Chemical Engineering (B.S.Ch.E.), Civil Engineering (B.S.C.E.), Computer Engineering (B.S.Comp.E.), Electrical Engineering (B.S.E.E.), Materials Science Engineering (B.S.M.S.E.) and Mechanical Engineering (B.S.M.E.). The Computer Science degree (B.S.C.S.) program is accredited by the Computing Accreditation Commission of ABET. Master s Degree Programs Engineering Outreach delivers coursework for the master s degrees listed below. All required coursework may be completed online, and most students will visit campus near the end of their programs to take a comprehensive exam or defend a thesis. These master s degree programs require between 30 and 36 total credits. Civil Engineering (M.Engr.) Computer Engineering (M.S., M.Engr.) Computer Science (M.S.) Electrical Engineering (M.S., M.Engr.) Engineering Management (M.Engr.) Geological Engineering (M.S.) Mechanical Engineering (M.Engr.) Statistical Science (M.S.) Teaching Mathematics (M.A.T.) Technology Management (M.S.) 3 Focus Areas Select academic departments offer courses delivered by Engineering Outreach that may be applied toward degrees at the University of Idaho, used for transfer credit or taken for professional education. Specific courses are listed on the EO website. Business Nuclear Engineering Academic Certificates An academic certificate is a coherent body of coursework designed to reflect specialized expertise. Earning a certificate from the University of Idaho may provide professional advancement opportunities and build a strong foundation for future graduate study. College of Engineering certificate courses already exist in the graduate curricula, and all required courses are delivered online by Engineering Outreach. Certificates require between 12 and 15 credits of coursework, up to 12 of which may be applied toward a degree at the University of Idaho with academic departmental approval. Engineering Outreach delivers online courses for the following academic certificates. Also included are the courses scheduled for delivery this spring that apply to those certificates. Spring 2015 Certificate Courses Analog Integrated Circuit Design Suat Ay, Ph.D. (suatay@uidaho.edu) ECE 445 Introduction to VLSI Design Power System Protection and Relaying Brian Johnson, Ph.D., P.E. (bjohnson@uidaho.edu) ECE 422 ECE 476 ECE 526 Power Systems Analysis Digital Filtering Protection of Power Systems II Process & Performance Excellence Christopher Williams, Ph.D. (chrisw@uidaho.edu) Bus 456 Stat 422 Stat 456 Quality Management Sample Survey Methods Quality Management Secure and Dependable Computing Systems James Alves-Foss, Ph.D. (jimaf@uidaho.edu) No certificate courses offered this spring Statistics Chris Williams, Ph.D. (chrisw@uidaho.edu) Stat 422 Stat 431 Stat 451 Stat 452 Stat 555 Stat 565 Sample Survey Methods Statistical Analysis Probability Theory Mathematical Statistics Statistical Ecology Computer Intensive Statistics

6 Admission Students taking courses delivered by Engineering Outreach must be admitted to the University of Idaho. They follow the same admission procedures as on-campus students, working with academic departments and the Office of Admissions. Students may apply online or download application forms from the admissions website. Admission status options include nondegree, undergraduate and graduate. Graduate Admission Application priority deadlines: February 1 (summer and fall admission) September 1 (spring admission) Applications received after the deadline but before the official start of the semester for which the applicant is seeking entry will be accepted only if additional students can be accommodated. If graduate admission is not granted prior to the EO registration deadline, students may apply for nondegree admission. Credits for classes taken by students with nondegree status are not automatically transferable into a master s program, so students should work closely with a faculty adviser during this process. Nondegree Admission Students apply for nondegree admission for some of the following reasons: Pursue studies for personal or professional advancement. Meet the registration deadline while graduate admission application is in process. Take prerequisites prior to graduate admission. Earn credits to transfer to another university. Earn an academic certificate. Nondegree students receive credit; with academic departmental approval, some or all of these credits may be applied toward a master s degree at the University of Idaho if graduate admission is granted later. Undergraduate Admission Engineering Outreach delivers a wide variety of undergraduate courses, but it is not possible to earn a bachelor s degree completely online through the program. Non-U.S. Citizen and International Admission Non-U.S. citizens residing in the United States and other international students have additional admission requirements, which may include TOEFL scores or equivalent, and verification of current visa status or copy of passport. New EO Student Checklist Access this list online at eo.uidaho.edu/get-started to use active links. Apply for admission. Review the Internet and policies. Review information about registration and fees. After you are admitted, set up your NetID account. Check VandalMail daily for s from instructors, EO staff or other U-Idaho offices. Select a course, noting the course registration number (CRN). Contact academic departments for academic advising, course prerequisites and instructor permissions before registering. Register by the registration deadline using VandalWeb. Look up or purchase your course textbooks on the VandalStore website. Review EO s registration confirmation , and contact EO if corrections are necessary. Find a proctor in your community willing to administer your exams; complete the EO Proctor Information form. Pay your course fees by the first day of the semester to avoid late fees. Read the information about course delivery to enhance your viewing experience. Visit EO s course schedules to determine when your course sessions are available. Access online course sessions by logging in to the EO Portal with your NetID and password. Review EO s calendar for add/drop, refund, course change and course completion deadlines. Questions? Contact us! 4

7 Registration and Fees Register Early! University of Idaho courses have enrollment minimums, and registering early can help ensure that scheduled courses will not be cancelled. This is critical for graduate-level courses that are scheduled for production during the current semester. It is also important to register early because some courses have enrollment caps, which may be reached soon after registration opens. Refer to the EO Calendar on the inside front cover of this catalog to determine when registration opens. Fees Students registering for EO courses pay a per-credit fee, and out-ofstate residents pay the same fees as residents. Fees include registration and online course access but do not include textbooks or software. Payment in full is expected at the time of registration and must be received by the first day of class to avoid late fees. If payment is not received by this time, the charges will remain outstanding on the student s account, and late fees will accrue. EO will not release access to online sessions until payment has been received in full. Students are not automatically dropped due to non-payment and must drop the course to avoid late fees. This can be done either on VandalWeb or by contacting EO; see the EO Calendar on the inside front cover of this catalog for deadlines. More information on the following payment options can be found on the EO website: Visa, MasterCard or Discover credit or debit card Check or money order (payable to University of Idaho Bursar ) sent to Engineering Outreach Tuition voucher from U.S. military or corporation Electronic bank transfer (e-check) via VandalWeb Payment plan at paymentplans Financial Aid Graduate and undergraduate students taking courses delivered by EO may be eligible for financial aid if they are enrolled at least half-time; nondegree students are not eligible. Visit Student Financial Aid Services at for more information. How to Register EO students register using VandalWeb; refer to the VandalWeb registration instructions on the EO website. Also refer to the example on page 10 of this catalog, which discusses registering with CRNs (course registration numbers). Students are advised to resolve prerequisite and permission requirements prior to attempting to register on VandalWeb. If the course description lists a prerequisite or permission requirement, students must contact the instructor or the academic department to discuss their academic backgrounds and to request removal of holds. If students receive holds while registering, they are required to take action in order to successfully register. EO will send an to each student s VandalMail account confirming that the student s registration information was received. Refunds Registering for a course creates a financial obligation to the University of Idaho. If there is any doubt about a course meeting your needs, contact the instructor with questions prior to registering. Students are responsible for dropping courses prior to the first day of the semester to avoid being billed and graded. To receive a 100 percent refund, the course(s) must be dropped within the first 10 days; there are no refunds after the 10th day. See the Spring 2015 EO Calendar on the inside front cover of this catalog for the refund deadline. Contact EO at eoreg@ uidaho.edu for assistance with dropping courses and refunds. Textbooks Textbooks and software are not included in the course materials supplied by EO, and the cost is not included with registration fees. Required textbooks are listed on the VandalStore s website at www. vandalstore.com and may be ordered online by selecting Vandal Books; the EO section is typically section 10. Military Benefits University of Idaho programs are approved by the U.S. Department of Veterans Affairs (VA). Visit for more information. Tuition assistance for active duty military members may be used for a portion of the Engineering Outreach course fees. Visit eo.uidaho.edu/about-students for more information about how to submit tuition assistance vouchers. Spring 2015 EO Course Fees* Course Level UI Undergraduate/Nondegree Admission UI Graduate Admission Courses numbered $602.00/credit $701.00/credit Courses numbered $663.00/credit $701.00/credit *Fees are subject to change by the Board of Regents of the University of Idaho; refer to the EO website for the most current information. 5

8 NetID Account Every student receives a University of Idaho NetID account at the time of admission. This account gives a student access to a wide range of services and remains active as long as the student is enrolled. To initially set up the account, the student will be required to set up a security profile and NetID password; follow the directions at NetID and Password The NetID is provided in the admission letter and consists of four letters and four numbers, e.g., Joe Vandal s NetID would be vand1234. Students set up their NetID passwords when they first access their accounts. EO Portal eo.uidaho.edu/portal Students who have registered for Engineering Outreach courses access their course sessions, handouts and graded materials by logging in to the EO Portal with their NetIDs and passwords. VandalWeb VandalWeb allows students to access their personal universityrelated information through a secure website. It provides access to the following: Payment records, including e-check instructions and setting up direct deposit for financial aid purposes Personal contact information, such as mailing and addresses Student records, including course registrations and degree audits Final grades and unofficial transcripts BbLearn Some instructors use the BbLearn course management system in addition to the EO Portal to provide supplementary course materials or other features such as online discussion groups and access to grades for individual exams and assignments. To determine if the course instructor uses BbLearn to supplement the EO Portal, log in to the EO Portal and refer to the course syllabus or course website by selecting the Course Links icon. VLab The university s VLab (virtual computer lab) allows students to run university-licensed software on their own computers from anywhere with an Internet connection. After installing a software package called Citrex Receiver, students select the program they would like to run in their browsers, and it will open automatically. Some of the software programs available through VLab: MathCAD 15 Matlab 2012a Minitab 16 NIST Reference Fluid Properties Populus VandalMail Students are required to activate and use their U-Idaho addresses, ending to ensure receipt of important university communications in a timely and consistent manner. Students are responsible for all information sent to their VandalMail. EO sends all communication to students VandalMail accounts, including messages about the following: Registration status updates Exams that were sent or received Graded coursework being posted in the EO Portal Daily class cancellations for live courses Per FERPA policies, students names and VandalMail addresses will be disclosed to other students in a course at the request of the instructor. addresses are considered directory information and may also be disclosed to persons not associated with the course unless the student submits the Request to Restrict the Disclosure of Directory Information form to the Office of the Registrar before the beginning of the semester. Download the form at forms, and select Confidentiality Request form. If a student submits this form after the semester begins, notify the EO enrollment services specialist at eoreg@uidaho.edu as soon as possible. Resetting Passwords If students need to reset their current NetID passwords or re-establish expired or forgotten NetID passwords, they can find instructions at eo.uidaho.edu/reset, or they can call the U-Idaho Help Desk at Old Administration Building Steps 6

9 What s New: EO Goes HD HD camera setup in an EO studio classroom Better image quality. Smaller file sizes. These are the latest technical innovations from Engineering Outreach. During the summer and early fall of 2014, Engineering Outreach (EO) updated all of its classrooms with state of the art High Definition (HD) technology. The reason for this upgrade was to improve the quality of the visual content delivered to EO students, and to phase out and replace aging and outdated equipment. As we worked through the planning, development and implementation of this project, we were extremely happy to see an image where fine details, such as small text and complicated equations, became much more readable. We also discovered a somewhat unanticipated side effect smaller file sizes, which mean faster download speeds for students. How is it possible to have higher resolution images yet smaller download file sizes and the resultant faster download speeds? While our new digital cameras make images that are much more detailed, these images are also much cleaner and free of imperfections and unwanted artifacts than the images from our old analog cameras. These exceptionally clean images compress neatly into smaller file sizes. This results in less Internet bandwidth required to download course sessions. We are pleased with the results of the upgrade project and think EO students will be too. Engineering Outreach has come a long way since the days of sending videocassettes in the mail decades ago. And we will keep looking for innovations to make the Engineering Outreach experience the best it can be. Timeline 1975: Engineering Outreach begins by recording courses on ¾ inch Umatic videotapes to distribute to a handful of students in Idaho. Late 70s: EO adds the Betamax format after Sony releases the new industrial version of the ½ inch videotape recorder. 1992: EO completely phases out the Betamax and ¾ inch Umatic formats and offers all courses on VHS videotapes. 1999: EO produces a few short courses on digital CD-Roms on an experimental basis and explores the possibility of using a DVD delivery format. 2002: After extensive research about DVD production, EO delivers four courses in DVD format. 2005: EO completes the transition from VHS to DVD delivery. 2010: EO provides USB course delivery. An entire course consisting of course materials and more than 30 hours of lectures can fit on a single USB flash drive. 2012: All courses are delivered completely online. Lectures can be streamed or downloaded from the EO Portal. 2014: EO updates all studio classrooms with high-definition technology improving viewing quality and increasing download speeds while requiring less bandwidth. 7

10 Exam Process Selecting an Exam Proctor Students are responsible for finding a qualified person to administer the exam process in compliance with Engineering Outreach policies. Visit the EO website for more information about the exam process and proctoring requirements, including contact information for the University of Idaho centers that provide proctoring services in Boise, Coeur d Alene, Idaho Falls and on the Moscow campus. Qualified proctors must be able to read and comprehend English. Students submit their proctor information to EO each semester by the first day of the semester using the EO Proctor Information form on the EO website. Options for qualified proctors: Faculty or staff at local educational institutions Work supervisors, training coordinators or human resources personnel U.S. military education officers Public librarians Proctors must be impartial and cannot be students personal friends, family members, work subordinates or U-Idaho students. It is the student s responsibility to pay for proctoring services if there is a charge. Proctors must be certified by EO before exams will be released. EO will notify the student if a new proctor is required. Exam Process EO notifies both the student and the proctor by when exams are made available to proctors. Students are responsible for scheduling appointments with their proctors to take exams; refer to the course syllabus or course website for more information about exam deadlines. Proctors will verify students picture IDs before releasing exams. Proctors are required to return completed exams by or fax to EO within 24 hours of completion. EO notifies students by when exams are received from their proctors and when graded exams are posted in the EO Portal. EO sends all communication to the student s VandalMail account. Academic Integrity Engineering Outreach students and faculty are responsible for maintaining academic integrity as defined by the University of Idaho s Student Code of Conduct. Students are expected to do the following: Submit their own work on papers, reports, homework, and exams. Cite all materials used from other sources, such as e-publications, journal articles, newspapers and books. Refrain from sharing coursework with other students. Know the instructor s expectations for each course. Consequences for academic dishonesty may be imposed by the course instructor or the Dean of Students. Such consequences may include a grade of F in the course or expulsion from the university. Disability Support Services University of Idaho s Disability Support Services Office (DSS) provides academic support services to students with temporary or permanent disabilities. Students requesting accommodation may send an to DSS at dss@uidaho.edu. Appropriate disability documentation must be provided and exam accommodation requests must be made each semester. Visit for more information. 8

11 Course Delivery Course Delivery Courses delivered by Engineering Outreach are recorded in University of Idaho studio classrooms and produced for online delivery by EO; they are semester-based and have the same course completion date as oncampus classes. Internet access is required for all EO students to view and/or download course sessions and materials, access and manage VandalMail, and facilitate university services and processes. Online Sessions In-class sessions are encoded in a high-resolution MP4 format. Broadband access (e.g., DSL, cable or wireless) and a PC or Mac are required for downloading sessions. Students may also view sessions using an Apple ios or Android device, and may subscribe to their online course sessions using itunes or via an RSS feed. EO recommends using VLC media player to view the downloaded sessions. Visit the EO website for more information about viewing options. If a student is viewing EO courses using a military computer or a restricted-access computer at a workplace and has security concerns about EO course delivery, contact Terri Gaffney, the EO associate director, to discuss delivery alternatives. She can be reached at or terrig@uidaho.edu. Engineering Outreach Portal Students access online course sessions through the portal link on the EO home page. EO students receive online access on the first day of class, and course sessions are available approximately two hours after being encoded. Sessions may be viewed online or downloaded and saved. Students also access handouts and graded materials in the EO Portal. Library Services University of Idaho Library services are available to Engineering Outreach students at and video tutorials are provided for off-campus students. Many journal articles are accessible online or by through interlibrary loan. Select the Distance Education link for information about services and how to obtain a library ID number. Instructor Contact Instructors can be reached by mail, , fax or by calling Engineering Outreach at Select the Instructor Directory link on the EO home page to view contact information. Course Completion Semester Deadline The EO course completion deadline for spring 2015 is May 15, 2015, at 3 p.m. pacific time. Final exams for live courses will become available in the EO Portal for proctors to access during finals week on campus; all exams for pre-encoded courses will be available to proctors at the beginning of the semester. It is critical that the student coordinates closely with the proctor to ensure the final exam reaches EO by the deadline. Final Course Grades and Transcripts Students may log in to VandalWeb to view final course grades and unofficial transcripts. Official transcripts may be ordered from the Office of the Registrar; visit for more information. Incompletes A grade of incomplete can only be assigned if a student has done passing work, but extenuating circumstances make it impossible to complete the course on time. The course instructor will assign the extended deadline. Prior to requesting a grade of incomplete, refer to the most current University of Idaho General Catalog at registrar/classes/catalogs, select General Requirements and Academic Procedures, then select Section F Grades of Incomplete for detailed information. Students who receive a grade of incomplete must visit the EO Portal by May 24, 2015, to download any sessions necessary to complete the course. EO will notify proctors regarding the exam process for students who have a grade of incomplete. The University of Idaho has a policy of nondiscrimination on the basis of race, color, religion, national origin, sex, age, sexual orientation, gender identity/expression, disability or status as a Vietnam era veteran. This policy applies to all programs, services, and facilities, and includes, but is not limited to, applications, admissions, access to programs and services, and employment. 9

12 Finding the CRN Every semester each course is given a specific course registration number that corresponds with the section of the course. EO courses are typically section 10 and have different CRNs from the on-campus section of the same course. Below you will find where each CRN is located within the course description. Course titles are listed with letter designations from their department and lists the number of credits. Specifies if the course is being recorded in the current semester or if it is a pre-encoded course. If you have further questions about the course, contact the instructor directly by . ME 539 Advanced Mechanics of Materials (3 cr) Same as CE 510 and MSE 539. Limitations of results of elementary mechanics of materials, complex situations of loading and structural geometry, applications to design of machines and structure, introduction to elasticity. Prereq: ME 341 or CE 342. ME 539: CRN CE 510: CRN MSE 539: CRN Instructor: Matthew Riley, Ph.D. riley@uidaho.edu Course descriptions provide a short synopsis of the course. Note the required prerequisites and permissions prior to registering, and contact the instructor or department to remove the registration hold. There are specific course registration numbers (CRN) for each course, as well as for each level and cross list. You are required to use CRNs when registering in VandalWeb. 10

13 Panorama view of the University of Idaho campus, Moscow, Idaho Spring 2015 Courses ACCOUNTING Acct 582 Enterprise Accounting (3 cr) Carries no credit toward master's degree in accounting. Both business and non-business students will learn the critical role played by financial statements as entrepreneurs try to launch a new business. The trade-offs of various funding sources and their impacts on financial statements are also explored. Content will be presented in an integrated manner, rather than concept by concept, to emphasize the interrelatedness of forecasts and assumptions regarding revenues, costs, and financing on financial statements and thus, the resulting business model. CRN: Produced: Spring 2013 Instructor: To be announced BUSINESS Bus 456 Quality Management (3 cr) Same as Stat 456. Principles of total quality management, with emphasis on problem solving techniques to continually improve processes; customer-driven quality, management and employee participation, statistical process control, product/process design, and process capability. Prereq: Stat 251 or Stat 301. Note: When this course was produced in fall 2011, there was an additional prereq of Stat 271. Bus 456: CRN Stat 456: CRN Produced: Fall 2011 Instructor: Scott Metlen, M.B.A., Ph.D. metlen@uidaho.edu Order textbooks online: 11

14 CIVIL ENGINEERING CE 431 Design of Water and Wastewater Systems I (3 cr) Application of fundamental engineering science to the design of systems for the treatment of domestic and industrial water supplies; treatment and re-use of domestic sewage and industrial wastes. Three lec a wk. Prereq: CE 322, CE 330, or Permission. A minimum grade of 'C' or better is required for all pre/coreqs. CRN: Instructor: Eric Coats, Ph.D., P.E. ecoats@uidaho.edu CE 484 Engineering Law and Contracts (3 cr) Project engineering techniques for planning, scheduling, and controlling typical engineering and construction projects. Contract law and application to engineering services agreements and construction contracts; preparing technical specifications, torts, professional liability, and alternate dispute resolution. Prereq: Senior standing in engineering. Note: This course was produced in spring 2014 as CE 404-CL, a special topics course. CRN: Produced: Spring 2014 Instructor: Eric Coats, Ph.D., P.E. ecoats@uidaho.edu CE 510 Advanced Mechanics of Materials (3 cr) See ME 539. CE 512 Advanced Topics in Waste Management and Treatment (3 cr) Modeling, analysis, and design of advanced and emerging engineering technologies and processes for waste management/treatment and resource recovery. Prereq: Instructor Permission. CRN: Instructor: Eric Coats, Ph.D., P.E. ecoats@uidaho.edu CE 519 Fluid Transients (3 cr) Same as ME 519. Development of concepts and modeling techniques for unsteady flow of liquid and gas in piping systems; extensive computer programming used to develop tools for analysis, design, and control of transients. Prereq: Math 310 and Engr 335. A minimum grade of 'C' or better is required for all pre/coreqs. CE 519: CRN ME 519: CRN Instructor: Jim Liou, Ph.D., P.E. liou@uidaho.edu CE 543 Dynamics of Structures (3 cr) Equations of motion, free vibration, damping mechanisms, harmonic, impulse, and seismic loading; shock and seismic response spectra, time and frequency domain analysis, modal analysis, structural dynamics in building codes. Cooperative: open to WSU degree-seeking students. CRN: Instructor: Richard Nielsen, Ph.D., P.E. rnielsen@uidaho.edu CE 562 Advanced Foundation Engineering (3 cr) Interpretation of in-situ tests for foundation design parameters, bearing capacity and settlement of axially loaded piles, pile groups, and drilled shafts, pile dynamics, laterally loaded deep foundations, downdrag and uplift of deep foundations, foundation load and integrity testing methods and data interpretation, mat foundations. Cooperative: open to WSU degree-seeking students. Prereq: CE 360 or Permission. A minimum grade of 'C' or better is required for all pre/coreqs. CRN: Instructor: Sunil Sharma, Ph.D., P.E. ssharma@uidaho.edu CE 575 Advanced Pavement Design and Analysis (3 cr) Design of new and rehabilitated asphalt and Portland cement concrete pavements; mechanistic-empirical design procedures; performance models; deflection-based structural analysis, overlay design, environmental effects; long-term pavement performance (LTPP), and introduction to research topics in pavement engineering. Cooperative: open to WSU degree-seeking students. Prereq: CE 475 or Equivalent, or Permission. A minimum grade of 'C' or better is required for all pre/ coreqs. CRN: Instructor: Fouad Bayomy, Ph.D., P.E. bayomy@uidaho.edu COMPUTER SCIENCE Also see Electrical and Computer Engineering CS 385 Theory of Computation (3 cr) See Math 385. CS 404/504-WC ST: Wireless Communication Protocols UAVs (3 cr) See the EO website for course description. CS 404-WC: CRN CS 504-WC: CRN Instructor: Robert Hiromoto, Ph.D. hiromoto@uidaho.edu Register in VandalWeb: 12

15 CS 415/515 Computational Biology: Sequence Analysis (3 cr) Design and analyze algorithms that address the computational problems posed by biological sequence data, such as DNA or protein sequences. Topics may include: comparing sequences (from genes to genomes), database searching, multiple sequence alignment, phylogenetic inferencing, gene discovery and annotation, and genome assembly. Additional class presentation and/or paper required for graduate credit. Prereq: Knowledge of high level programming language, basic probability theory, basic molecular biology, or Permission. CS 415: CRN CS 515: CRN Instructor: Robert Heckendorn, Ph.D. CS 420/520 Data Communication Systems (3 cr) Concept and terminology of data communications, equipment, protocols (including ISO/OSI and TCP/IP), architectures; transmission alternatives, regulatory issues and network management. Additional projects/ assignments reqd for grad cr. Prereq: CS 150 and 240. CS 420: CRN CS 520: CRN Instructor: Axel Krings, Ph.D. CS 452/552 Real-Time Operating Systems (3 cr) Topics of interest in the implementation of Real-Time Operating Systems, especially as applicable to embedded systems, including a relevant hardware review, interrupts and interrupt handling, real-time scheduling principles and implementation, latency, task management, shared data and synchronization, timers, message passing, tradeoffs between memory space and speed. Students will build a simple but relatively complete real-time operating system over the course of the semester. Additional projects and assignments are required for graduate credit. Prereq: CS 240. CS 452: CRN CS 552: CRN Instructor: Robert Rinker, Ph.D. rinker@uidaho.edu CS 472/572 Evolutionary Computation (3 cr) Solving computation problems by growing solutions; simulates natural evolution using analogues of mutation, crossover, and other generic transformations on representations of potential solutions; standard EC techniques such as genetic algorithms and evolutionary programming, mathematical explanations of why they work, and a survey of some applications; the focus is on solving real-world problems using projects. Graduate-level research and possible paper or presentation required for grad cr. Prereq: CS 210. CS 472: CRN CS 572: CRN Instructor: Robert Heckendorn, Ph.D. heckendo@uidaho.edu CS 504-WC ST: Wireless Communication Protocols UAVs (3 cr) See CS 404-WC. CS 515 Computational Biology: Sequence Analysis (3 cr) See CS 415. CS 520 Data Communication Systems (3 cr) See CS 420. CS 552 Real-Time Operating Systems (3 cr) See CS 452. CS 572 Evolutionary Computation (3 cr) See CS 472. ELECTRICAL AND COMPUTER ENGINEERING Also see Computer Science ECE 210 Electrical Circuits I (3 cr) Intro to d.c. and transient electrical circuits; mesh and nodal analysis; dependent sources; circuit theorems; transient analysis with differential equations. Three lec and one recitation a wk. Prereq: Math 175 with a grade of C or better; Coreq: ECE 211, Math 310 and Phys 212/212L. Department permission required, contact info@ece.uidaho.edu. CRN: Produced: Fall 2013 Instructor: Michael Santora, Ph.D. (lecturer) Feng Li, Ph.D. (grader, contact) fengli@uidaho.edu ECE 211 Electrical Circuits I Lab (1 cr) Lab to accompany ECE 210. Lab experiments and computer simulations. One 3-hr lab a wk. Coreq: ECE 210 and Phys 212/212L. Department permission required, contact info@ece.uidaho.edu. CRN: Produced: Fall 2013 Instructor: Michael Santora, Ph.D. (lecturer) Feng Li, Ph.D. (grader, contact) fengli@uidaho.edu ECE 212 Electrical Circuits II (3 cr) Continuation of ECE 210. Intro to sinusoidal steady state circuits; time and frequency domain analysis; Laplace transforms; Fourier series; transfer functions; Bode plots, filters. Three lec and one recitation a wk. Prereq: ECE 210, Math 310, and Phys 212/212L; a grade of C or better is required for all prerequisite courses; Coreq: ECE 213. Department permission required, contact info@ece.uidaho.edu. CRN: Produced: Fall 2013 Instructor: Michael Santora, Ph.D. (lecturer) Feng Li, Ph.D. (grader, contact) fengli@uidaho.edu 13

16 ECE 213 Electrical Circuits II Lab (1 cr) Lab to accompany ECE 212. Continuation of ECE 211. Lab experiments and computer simulations. One 3-hr lab a wk. Prereq: ECE 211 and Phys 212/212L; Coreq: ECE 212. Department permission required, contact info@ece.uidaho.edu. CRN: Produced: Fall 2013 Instructor: Michael Santora, Ph.D. (lecturer) Feng Li, Ph.D. (grader, contact) fengli@uidaho.edu ECE 240 Digital Logic (3 cr) Number systems, truth tables, logic gates, flip-flops, combinational and synchronous sequential circuits; intro to digital systems and basic microprocessor architecture; certification exam not reqd. Prereq: Phys 212/212L; Coreq: ECE 241. CRN: Instructor: Michael Santora, Ph.D. mjsantora@uidaho.edu ECE 241 Logic Circuit Lab (1 cr) Open lab to accompany ECE 240. Design and construction of combinational and synchronous sequential logic circuits; certification exam not reqd. Prereq: Phys 212/212L; Coreq: ECE 240. CRN: Instructor: Michael Santora, Ph.D. mjsantora@uidaho.edu ECE 310 Microelectronics I (3 cr) Operational amplifier fundamentals and applications, introduction to electronic devices such as diodes, bipolar junction transistor (BJT) and metal oxide semiconductor field effect transistors (MOSFET), large and small-signal modeling of non-linear electronic devices, DC and smallsignal analysis of circuits with non-linear electronic devices, biasing of electronic circuits using passive and active elements such as current mirrors, frequency response of electronic circuits,, introduction to the analysis, design, and applications of electronic circuits such as rectifiers, power supplies, and low-frequency single-stage amplifiers. Practical limitations of amplifiers of electronic circuits. Prereq: ECE 212 and ECE 213; Coreq: ECE 311. Department permission required, contact info@ece.uidaho.edu. Note: When this course was produced in summer 2013, the title was ECE 310 Fundamentals of Electronics, and the description was Operational amplifier fundamentals and applications, introduction to electronic devices such as diodes, bipolar junction and field effect transistors, large and small-signal modeling of non-linear electronic devices, DC and small-signal analysis of circuits with non-linear electronic devices, biasing of electronic circuits, introduction to the analysis, design, and applications of electronic circuits such as rectifiers, power supplies, and low-frequency single-stage amplifiers. Practical limitations of amplifiers of electronic circuits. CRN: Produced: Summer 2013 Instructor: Michael Santora, Ph.D. mjsantora@uidaho.edu 14 ECE 311 Microelectronics I Lab (1 cr) Lab to accompany ECE 310. Coreq: ECE 310. Department permission required, contact info@ece.uidaho.edu. Note: When this course was produced in summer 2013, the title was ECE 311 Fundamentals of Electronics Lab. CRN: Produced: Summer 2013 Instructor: Michael Santora, Ph.D. mjsantora@uidaho.edu ECE 319 Background Study in Electronics (3 cr) Not applicable toward any UI undergrad degree; valid only for removal of electronics (ECE 310) deficiency for graduate students who do not have BSEE background. See ECE 310 description below. Graded P/F based on comprehensive exam at completion of course. Prereq: Permission. ECE 310 Microelectronics I (3 cr). Operational amplifier fundamentals and applications, introduction to electronic devices such as diodes, bipolar junction transistor (BJT) and metal oxide semiconductor field effect transistors (MOSFET), large and small-signal modeling of non-linear electronic devices, DC and small-signal analysis of circuits with non-linear electronic devices, biasing of electronic circuits using passive and active elements such as current mirrors, frequency response of electronic circuits,, introduction to the analysis, design, and applications of electronic circuits such as rectifiers, power supplies, and low-frequency single-stage amplifiers. Practical limitations of amplifiers of electronic circuits. Prereq: ECE 212 and ECE 213; Coreq: ECE 311. CRN: Produced: Summer 2013 Instructor: Michael Santora, Ph.D. mjsantora@uidaho.edu ECE 330 Electromagnetic Theory (3 cr) Vector mathematics; charge and current; fields as forces; work, potential and electro-motive force; Faraday's law of induction; Gauss's and Ampere's laws; material modeling; waves in isotropic media. Prereq: Math 275, Math 310, and Phys 212/212L; Coreq: ECE 331. CRN: Produced: Fall 2014 Instructor: David Atkinson, Ph.D. atkinson@uidaho.edu Visit the EO website: eo.uidaho.edu

17 ECE 339 Background Study in Electromagnetic Theory (3 cr) Not applicable toward any UI undergrad degree; valid only for removal of electromagnetic theory (ECE 330) deficiency for grad students who do not have BSEE background. See ECE 330 description below. Graded P/F based on comprehensive exam at completion of course. Prereq: Permission. ECE 330 Electromagnetic Theory (3 cr). Vector mathematics; charge and current; fields as forces; work, potential and electromotive force; Faraday's law of induction; Gauss's and Ampere's laws; material modeling; waves in isotropic media. Prereq: Math 275, Math 310, and Phys 212/212L; Coreq: ECE 331. CRN: Produced: Fall 2014 Instructor: David Atkinson, Ph.D. ECE 349 Background Study in Digital Logic (3 cr) Not applicable toward any UI undergrad degree; valid only for removal of digital computer fundamentals (ECE 240) deficiency for grad students. See current ECE 240 description below. Graded P/F. ECE 240 Digital Logic (3 cr). Number systems, truth tables, logic gates, flip-flops, combinational and synchronous sequential circuits; intro to digital systems and basic microprocessor architecture; certification exam not reqd. Prereq: Phys 212/212L; Coreq: ECE 241. Note: When this course was produced, it was titled EE341 Background Study in Digital Computer Fundamentals; ECE 240 was titled EE 340 Digital Logic, and there were no prereqs. CRN: Produced: Spring 1997 Instructor: Eugene Saghi, Ph.D. (lecturer) James Frenzel, Ph.D., P.E. (grader, contact) ECE 404/504-CE ST: Computational Electromagnetics (3 cr) This course provides the foundation in computational techniques for numerical analysis of electromagnetics (EM) problems, including the finite difference time domain (FDTD) method, the finite element method (FEM), and the method of moments (MoM). Its emphasis is on the formulation of physical problems in terms of mathematical boundaryvalue problems, numerical discretization of continuous problems, and development of basic computer codes for simulation of electromagnetic fields in practical engineering applications, using each of the above techniques. Prereq: ECE 330 and Math 330. ECE 404-CE: CRN ECE 504-CE: CRN Instructor: Ata Zadehgol, Ph.D. ECE 410 Microelectronics II (3 cr) Introduction to analog integrated circuit (IC) implementation and design, differential and common-mode signal concepts, differential amplifiers, multistage amplifiers, operational amplifier design, frequency response of electronic circuits, feedback in electronic circuits, large-signal/power amplifiers, advanced current sources and mirrors, and fundamentals of analog filters. Prereq: ECE 310 and ECE 311; or Permission. CRN: Instructor: Saied Hemati, Ph.D. ECE 415/515 Analog Integrated Circuit Design (3 cr) Analog integrated circuit (IC) analysis, design, simulation, and layout, advanced biasing techniques, voltage references and regulators, operational amplifiers, frequency compensation techniques, noise analysis in analog circuits, and continuous-time integrated circuit filter design. Additional projects/assignments required for graduate credit. Prereq: ECE 410 or Permission. ECE 415: CRN ECE 515: CRN Instructor: Suat Ay, Ph.D. ECE 417/517 Mixed Signal IC Design (3 cr) Sample and hold (S/H) circuits, comparators, data-converter fundamentals, Nyquist-rate digital-to-analog converters (DAC) and analog-to-digital converters (ADC), over-sampling data converters, and phase-locked loops. Additional projects/assignments are required for graduate credit. Prereq: ECE 410 or Permission. ECE 417: CRN ECE 517: CRN Instructor: Saied Hemati, Ph.D. ECE 419/516 Image Sensors and Systems (3 cr) This course introduces various concepts and fundamentals related to semiconductor image sensors. Topics cover light production and detection, video image formats, image sensor characteristics and performance metrics, basic and advanced operation principals and types of semiconductor image sensors (CCD and CMOS), noise in imagers, image and color processing, and issues related to camera system design, integration and signal processing. Additional projects/assignments are required for graduate credit. Prereq: ECE 310. ECE 419: CRN ECE 516: CRN Instructor: Suat Ay, Ph.D. 15

18 ECE 420 Energy Systems II (3 cr) Three-phases, three-phase transformers, winding theory, rotating waves, steady state operation of three-phase synchronous and steady state operation of single and three-phase induction machines, and AC drives. Labs: three-phase measurements, three-phase transformers, synchronous machines, induction machines. ECE 420 cannot be counted as a graduate depth area course. Prereq: ECE 320 and ECE 321. CRN: Instructor: Herb Hess, Ph.D., P.E. hhess@uidaho.edu ECE 422 Power Systems Analysis (3 cr) Balanced and unbalanced faults, Zbus methods, transient generator models, stability analysis, fault analysis using commercial software, and introduction to power system protection. Prereq: ECE 421. CRN: Instructor: Sara Eftekharnejad senejad@uidaho.edu ECE 427 Power Electronics (3 cr) Characteristics, limitations, and application of solid state power devices; practical aspects of power electronic converters, including rectifiers and inverters; choppers, AC phase control, and device gating techniques. Cooperative: open to WSU degree-seeking students. Prereq: ECE 420. CRN: Instructor: Herbert Hess, Ph.D., P.E. hhess@uidaho.edu ECE 432 Propagation of Wireless Signals (3 cr) Maxwell s Equations, including Poynting s vector and Poynting s theorem; Wave equation with solutions, Helmholz equation, plane waves; Reflection and refraction; Theory of guided waves, ray theory and mode theory; Atmospheric and ionospheric effects on wave propagation; Multipath effects and fading; Ground waves and surface waves. Prereq: ECE 330 or Permission. CRN: Produced: Fall 2014 Instructor: David Atkinson, Ph.D. atkinson@uidaho.edu ECE 434 Antenna Principles and Design (3 cr) Maxwell s equations, vector potential theory, radiation patterns, antenna efficiency and bandwidth, polarization, dipole and loop antennas, line sources, patch antennas, lineal arrays, antenna systems, radar equation. Prereq: ECE 330 or Permission. CRN: Instructor: Jeff Young, Ph.D., P.E. jyoung@uidaho.edu ECE 440 Digital Systems Engineering (3 cr) Design of digital systems using a hardware description language and field-programmable gate arrays; projects emphasize a top-down design process using software tools; topics include datapath optimization, pipelining, static and dynamic memory, technology issues, intra-system communication, and design for testability. Prereq: ECE 240, 241, or Permission. Note: Students will need to purchase a Zybo Zynq board (www. digilentinc.com) and be able to run the Xilinx Vivado Design Suite Design Edition software ( CRN: Instructor: James Frenzel, Ph.D., P.E. jfrenzel@uidaho.edu ECE 445 Introduction to VLSI Design (3 cr) Principles of design of very large scale integrated circuits; CMOS logic design; transistor sizing and layout methodologies; intro to IC CAD tools. Prereq: ECE 310, 240 or Permission. CRN: Produced: Fall 2014 Instructor: James Frenzel, Ph.D., P.E. jfrenzel@uidaho.edu ECE 462/562 Semiconductor Theory (3 cr) Fundamental theory and behavior of modern semiconductor devices. Additional projects/assignments reqd for grad cr. Prereq for ECE 462: ECE 460; Prereq for ECE 562: Permission. ECE 462: CRN ECE 562: CRN Instructor: Dennis Sullivan, Ph.D., P.E. dsulliva@uidaho.edu ECE 465/565 Introduction to Microelectronics Fabrication (3 cr) This course serves as an introduction to the fabrication of microelectronic devices. Topics include the basics of IC structures, clean room protocol, photolithography, film growth and deposition, as well as IC interconnect technologies. Additional projects/assignments required for graduate credit. Prereq: ECE 310. ECE 465: CRN ECE 565: CRN Instructor: Aicha Elshabini, Ph.D. elshabini@uidaho.edu Free software accessible in VLab: 16

19 ECE 476 Digital Filtering (3 cr) Design methods for recursive and non-recursive filters; frequency domain characteristics; computer-aided design; applications. Prereq: ECE 450. Note from instructor: Prereq is ECE 350 or permission. CRN: Instructor: Richard Wall, Ph.D., P.E. ECE 504-CE ST: Computational Electromagnetics (3 cr) See ECE 404-CE. ECE 515 Analog Integrated Circuit Design (3 cr) See ECE 415. ECE 516 Image Sensors and Systems (3 cr) See ECE 419. ECE 517 Mixed Signal IC Design (3 cr) See ECE 417. ECE 526 Protection of Power Systems II (3 cr) Protection of electrical equipment as related to electric power systems with emphasis on digital algorithms. Cooperative: open to WSU degreeseeking students. Prereq: ECE 525 or Permission. CRN: Instructor: Brian Johnson, Ph.D., P.E. ECE 529 Utility Applications of Power Electronics (3 cr) HVdc transmission, static VAr compensators, FACTS devices, Custom Power devices, electrical energy storage systems, power quality, harmonic compensation, and alternative energy supply interfacing. Prereq: ECE 422. CRN: Instructor: Brian Johnson, Ph.D., P.E. ECE 562 Semiconductor Theory (3 cr) See ECE 462. ECE 565 Introduction to Microelectronics Fabrication (3 cr) See ECE 465. ECE 570 Random Signals (3 cr) Probability, random variables, and random signals in engineering systems; stochastic calculus, stationarity, ergodicity, correlation, and power spectra; propagation of random signals through linear systems; Kalman filter theory and applications. Cooperative: open to WSU degree-seeking students. Prereq: ECE 350, and Stat 301 or Stat 451, or Permission. CRN: Instructor: Touraj Assefi, Ph.D. ENGINEERING GENERAL Engr 210 Engineering Statics (3 cr) Principles of statics with engineering applications; addition and resolution of forces, vector algebra, moments and couples, resultants and static equilibrium, equivalent force systems, centroids, center of gravity, free body method of analysis, two and three dimensional equilibrium, trusses, frames, and friction. Cooperative: open to WSU degree-seeking students. Prereq: Math 170. Instructor permission required, contact Dr. Bauer at CRN: Produced: Spring 2013 Instructor: Denise Bauer, Ph.D. ENGINEERING MANAGEMENT Also see Accounting, Business and Statistics EM 510 Engineering and Technology Management Fundamentals (3 cr) Same as TM 510. Fundamental principles of engineering management addressing management theory applied to the engineering environment; management processes and techniques; attitudes that facilitate the leadership role of the engineering manager in an engineering organization; team-taught by business and engineering faculty. Prereq: Permission. EM 510: CRN TM 510: CRN Produced: Fall 2014 Instructor: Dennis Keiser, Ph.D. Larry Stauffer, Ph.D., P.E. Sandy Lieske, M.S.-ECE, M.S.-MOT 17

20 GEOLOGICAL ENGINEERING GeoE 517 Tunnel Design and Construction (3 cr) Geotechnical considerations for tunneling, drilling and blasting, TBM, ground support, haulage, ventilation, water handling, and trenchless technology. Application of analytical techniques such as the finite element method to design stable underground structures and support systems. Prereq: GeoE 407 or Permission. CRN: Produced: Spring 2012 Instructor: SJ Jung, Ph.D. MATERIALS SCIENCE AND ENGINEERING Also see Nuclear Engineering MSE 438/538 Fundamentals of Nuclear Materials (3 cr) Same as NE J438/J538. This course is designed for students who wish to learn about nuclear materials and fuels from a materials science viewpoint. Topics to be covered include crystal structure, diffusion, radiation damage processes etc. Students who wish to receive credit for the 500-level course are required to do term-projects and advanced problems. Prereq: MSE 201 or NE 450; or Permission. MSE 438: CRN MSE 538: CRN NE 438: CRN NE 538: CRN Instructor: Indrajit Charit, Ph.D. icharit@uidaho.edu MSE 539 Advanced Mechanics of Materials (3 cr) See ME 539. MATHEMATICS Also see Statistics Math 123 Mathematics Applied To The Modern World (3 cr) Discussion of some aspects of mathematical thought through the study of problems taken from areas such as logic, political science, management science, geometry, probability, and combinatorics; discussion of historical development and topics discovered in the past 100 years. Department permission required, contact math@uidaho.edu. CRN: Produced: Summer 2006 Instructor: Gary Peterson, M.S., J.D. (lecturer) Cynthia Piez, M.S. (grader, contact) Math 160 Survey of Calculus (4 cr) Carries no credit after Math 170. Functions, graphing, derivative, integral, exponential and logarithmic functions, functions of several variables. Primarily for students in business, life sciences or architecture who need only one semester of calculus. Prereq: Sufficient score on SAT, ACT, or COMPASS Math Test, or Math 137 with a C or better, or Math 143 with a C or better. Required test scores can be found here: registrar/registration/placement/math. Department permission required, contact math@uidaho.edu. CRN: Produced: Summer 2014 Instructor: Cynthia Piez, M.S. cpiez@uidaho.edu Math 170 Analytic Geometry and Calculus I (4 cr) Carries 2 credits after Math 160. Functions, limits, continuity, differentiation, integration, applications, differentiation and integration of transcendental functions. Primarily for students in engineering, mathematics, science or computer science. Prereq: Math 143 (with a grade of C or better) and Math 144 (concurrent enrollment in Math 144 is allowed although it is recommended that students complete Math 144 before enrolling in Math 170); or demonstrated proficiency through a sufficiently high score on the ACT, SAT, or COMPASS tests. Department permission required, contact math@uidaho.edu. CRN: Produced: Summer 2012 Instructor: Cynthia Piez, M.S. cpiez@uidaho.edu Math 175 Analytic Geometry and Calculus II (4 cr) Differentiation and integration of transcendental functions, integration techniques, general mean value theorem, numerical techniques, and series. Prereq: Math 170 with a grade of C or better. Department permission required, contact math@uidaho.edu. CRN: Produced: Summer 2012 Instructor: Cynthia Piez, M.S. cpiez@uidaho.edu Math 215 Introduction to Higher Mathematics (3 cr) Carries no credit after Math 461 or Math 471. The primary goal of this course is to teach students how to read and write mathematical proofs. Topics include logic and proof techniques, as well as fundamental mathematical structures such as sets, relations, functions, and number systems. Prereq: Math 175 and permission. Department permission required, contact math@uidaho.edu. CRN: Produced: Spring 2013 Instructor: Jennifer Johnson-Leung, Ph.D. jenfns@uidaho.edu 18