Cisco 8-Port Channelized T1/E1 Shared Port Adapter
|
|
- Andrew Bertram Jacobs
- 2 years ago
- Views:
Transcription
1 Cisco 8-Port Channelized T1/E1 Shared Port Adapter The Cisco I-Flex approach combines shared port adapters (SPAs) and SPA interface processors (SIPs), providing an extensible design that helps prioritize data, voice, and video services. Enterprise and service provider customers can take advantage of improved slot economics resulting from modular port adapters that are interchangeable across Cisco routing platforms. The I-Flex design maximizes connectivity options and offers superior service intelligence through programmable interface processors that deliver line-rate performance. I-Flex enhances speed-to-service revenue and provides a rich set of quality of service (QoS) features for premium service delivery while effectively reducing the overall cost of ownership. This data sheet contains the specifications for the Cisco 8-Port Channelized T1/E1 Shared Port Adapter (SPA; refer to Figure 1). Figure 1. Cisco 8-Port Channelized T1/E1 Shared Port Adapter Product Overview Today's global enterprise and service provider networks require diverse networking solutions to meet both economic and evolving connectivity needs. The demand for high-density, cost-effective solutions increases as corporate intranets expand to include more regional offices and increased numbers of remote and mobile users. The Cisco 8-Port Channelized T1/E1 SPA provides one of the greatest densities currently offered in the industry at 8 ports per SPA and up to 32 ports per SIP. At a cost per T1/E1 port less than that of a standard serial port with external channel service unit/data service unit (CSU/DSU), the Cisco 8-Port Channelized T1/E1 SPA is cost-effective for all WAN connectivity. The SPA is designed to provide a full 8-port channelized solution for the Cisco 6500,7600 and the Series Routers. The interfaces can be channelized, fractional, or unframed (E1) with up to 256 independent High-Level Data Link Control (HDLC) channels definable for T1 and E1 applications. With these capabilities, the SPA eliminates the need for separate interface types for separate connection requirements. All contents are Copyright Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 1 of 6
2 Multilink Point-to-Point Protocol (MLPPP) is supported (in hardware) to enable link aggregation greater than T1 capacity. Up to eight individual T1s can be combined within a multilink bundle that appears to be a single IP link. This enables service providers to provision greater-than-t1 bandwidth incrementally, without requiring migration of the circuit and customer premises equipment (CPE) infrastructure to T3 facilities. The Cisco 8-Port Channelized T1/E1 SPA is hot-swappable and supports service-transparent online insertion and removal (OIR), allowing removal of the SPA without impacting the interface processor and other SPAs. Applications The Cisco 8-Port Channelized T1/E1 SPA is ideal for service providers and large enterprises looking to cost-effectively deploy high-density terminations of multiple remote sites (Figure 2). The SPA helps enable applications that require remote and branch-office locations to be terminated on a single router in a corporate enterprise network. For service provider applications where only DSU functions are required (for example, at sites colocated with a carrier), the Cisco 8-Port Channelized T1/E1 SPA provides high port density at a reduced cost per port. For E1 applications, the channelized E1/G.703 interface allows direct connectivity to 120-ohm G.703 lines. Figure 2. Figure 2 High-Density Termination for Multiple Remote Sites Features and Benefits The Cisco 8-Port Channelized T1/E1 SPA offers many advantages, including: Eight software-configurable T1 or E1 ports Support for channelized and fractional T1/E1, and clear channel E1 256 independent HDLC channels Integrated CSUs/DSUs All contents are Copyright Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 2 of 6
3 Support for all major encapsulations, including MLPPP and multilink Frame Relay (MLFR) Support for link fragmentation and interleaving (LFI) over Frame Relay and MLPPP The Cisco SPA/SIP portfolio offers the following additional advantages: Modular, flexible, intelligent interface processors Superior flexibility, supporting a combination of interface types on the same interface processor for consistent services, independent of access technology Pioneering programmable interface processors that provide flexibility for the service diversity required in next-generation networks Innovative design that supports intelligent service delivery without compromising on performance Increased speed-to-service revenue The scalable, programmable Cisco architecture extended to 10 Gbps dramatically improves customer density, increasing potential revenue per platform. Interface breadth (copper, channelized, POS, ATM, and Ethernet) on a modular interface processor allows service providers to roll out new services more quickly, helping ensure that all customers, large and small, receive consistent, secure, and guaranteed services. High-density Small Form-Factor Pluggable (SFP) interfaces are featured for high-portcount applications with reach flexibility. Future optical technology improvements can be adopted using existing SPAs. Dramatically improved return on your routing investment Improved slot economics and increased density reduce capital expenditures (CapEx). The ability to easily add new interfaces as they are needed facilitates a "pay-as-yougrow" business model. SPAs are shared across multiple platforms, and can be easily moved from one to another, providing consistent feature support, accelerated product delivery, and a significant reduction in operating expenses (OpEx) through common sparing as service needs change. Product Specifications Table 1 gives specifications of the Cisco 8-Port Channelized T1/E1 SPA. Table 1. Features Product Specifications Descriptions Product compatibility Port density per SPA Physical interface Cisco Catalyst 6500 Series Switches Cisco 7600 Series Routers Cisco Series Routers Cisco XR Series Routers 8 ports RJ-45 connector RJ-45 to BNC adapter cable option All contents are Copyright Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 3 of 6
4 Protocols Features and functions T1-specific features Encapsulation protocols: HDLC Point-to-Point Protocol (PPP), RFC 1662 Frame Relay, RFC 1490 Multilink support: MLPPP, RFC 1990 MLFR, FRF.16 LFI over Frame Relay (FRF.12) and MLPPP Up to 8 independent T1 or E1 ports configurable as either all T1 or all E1 only Full-duplex connectivity Channelized and fractional T1/E1, clear channel E1 supported Up to 256 usable n x 64K, where n is 1 to 24 for T1 and 1 to 32 for E1 Line-rate performance for all ports channelized to DS-0 Integrated CSUs/DSUs Internal or network clocking selectable on each port Per-port, dual-color status LED Loopback capabilities: Local and remote loopback at the T1/E1 level Response to embedded loopback commands Insertion of loopback commands into transmitted signal N x DS-0 system-side loopback Bit-error-rate-testing (BERT) pattern generation and detection per channel (maximum of 6 T1/E1 at a time) Programmable pseudorandom pattern up to 32 bits long, including all 0s, all 1s, 211, 215, 220, 220 Quasi-Random Signal Sequence (QRSS), 223, alternating 0s and 1s, 1-in-8, and 3-in bit error-count and bit-count registers Fully independent transmit and receive sections Detection of test patterns with bit error rates up to hour history maintained for error statistics and failure counts, at 15-minute intervals 16- and 32-bit cyclic redundancy check (CRC); 16-bit default Data rate to Mbps per port Impedance: 100 ohms D4 Super Frame (SF) or Extended Super Frame (ESF) framing Alternate mark inversion (AMI) or binary 8-zero substitution (B8ZS) line encoding ANSI T1.403 and AT&T TR Facility Data Link (FDL) Selectable T1 cable length in increments from 0 to 655 feet Selectable T1 CSU line build-out (LBO): 0, -7.5, -15, and db Selectable T1 CSU receiver gain: 26 or 36 db Alarm monitoring: Alarm indication signal (AIS) Out of frame (OOF) Far-end alarm failure (yellow or distant alarm) Performance data collection: CRC and bit errors Framing bit errors Line errored seconds Far-end errored seconds Far-end severely errored seconds Far-end unavailable seconds Line coding violation (LCV) All contents are Copyright Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 4 of 6
5 E1-specific features Reliability and availability MIBs Network management Simple Network Management Protocol (SNMP) Compliance and agency approvals Environmental specifications Data Sheet Data rate to Mbps (unframed mode) or Mbps (framed mode) per port Impedance: 120 ohms (RJ-45 to BNC adapter cable offers 75-ohm configuration option) Unframed E1, CRC4, or non-crc4 framing High-density bipolar with three zeroes (HDB3) line encoding Alarm monitoring: AIS OOF Remote alarm indication (RAI) Performance data collection: CRC and bit errors Framing bit errors Far-end block error (FEBE) LCV OIR Single SPA software reset RFC 1406 MIB Simple Network Management Protocol (SNMP) Weight: 0.75 lb (0.34 kg) Height: 0.8 in. (2.03 cm) (single height) Width: 6.75 in. (17.15 cm) Depth: 7.28 in. (18.49 cm) Power 9.4W maximum CE Marking Safety UL CSA 22.2 No IEC EN AS/NZS 3260 TS001 EMC CFR47 Part 15 ICES 003 EN55022 CISPR 22 AS/NZ 3548 VCCI EN55024 EN EN Telecom (T1) ANSI T1.403 Telecom (E1) ITU G.703 G.704 G.706 Operating temperature: 41 to 104 F (5 to 40 C) Storage temperature: 38 to 150 F ( 40 to 70 C) Operating humidity: 5 to 85% relative humidity Storage humidity: 5 to 95% relative humidity Ordering Information To place an order, visit the Cisco Ordering Home Page or refer to Table 2. Table 2. Ordering Information Product Name Part Number All contents are Copyright Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 5 of 6
6 Cisco 8-Port Channelized T1/E1 Shared Port Adapter Adapter Cable converts 75 ohms to 120 ohms SPA-8XCHT1/E1 CAB-ADPT Service and Support Cisco offers a wide range of services programs to accelerate customer success. These innovative services programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco services help you protect your network investment, optimize network operations, and prepare your network for new applications to extend network intelligence and the power of your business. For more information about Cisco Services, refer to Cisco Technical Support Services or Cisco Advanced Services. For More Information For more information about the Cisco SPA/SIP portfolio, visit or contact your local Cisco account representative. Printed in USA C /07 All contents are Copyright Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 6 of 6
Cisco 2-Port and 4-Port Channelized T3 (DS-0) Shared Port Adapters
Cisco 2-Port and 4-Port Channelized T3 (DS-0) Shared Port Adapters The Cisco I-Flex approach combines shared port adapters (SPAs) and SPA interface processors (SIPs), providing an extensible design that
Cisco 2- and 4-Port Clear Channel T3/E3 Shared Port Adapters Version 2
Data Sheet Cisco 2- and 4-Port Clear Channel T3/E3 Shared Port Adapters Version 2 Demand for high-capacity corporate backbones, for high-speed access to the global Internet, and for trunking connections
Cisco 2-Port and 4-Port OC-3c/STM-1c POS Shared Port Adapters
Cisco 2-Port and 4-Port OC-3c/STM-1c POS Shared Port Adapters The Cisco I-Flex approach combines shared port adapters (SPAs) and SPA interface processors (SIPs), providing an extensible design that enables
Cisco 4-Port Clear Channel T1/E1 High-Speed WAN Interface Card for Cisco 2821, 2851, and 3800 Series Integrated Services Routers
Cisco 4-Port Clear Channel T1/E1 High-Speed WAN Interface Card for Cisco 2821, 2851, and 3800 Series Integrated Services Routers The Cisco 4-Port Clear Channel T1/E1 High-Speed WAN Interface Card provides
Cisco Shared Port Adapters/SPA Interface Processors Cisco 1-Port OC-12c/STM-4c POS Shared Port Adapter
Cisco Shared Port Adapters/SPA Interface Processors Cisco 1-Port OC-12c/STM-4c POS Shared Port Adapter The Cisco I-Flex approach combines shared port adapters (SPAs) and SPA interface processors (SIPs),
Cisco 4-Port Clear Channel T1/E1 High-Speed WAN Interface Card
Cisco 4-Port Clear Channel T1/E1 High-Speed WAN Interface Card The Cisco 4-Port Clear Channel T1/E1 High-Speed WAN Interface Card provides n x T1/E1 connectivity in a compact form factor and reduces deployment
Cisco Channelized T1/E1 and ISDN PRI Modules
Cisco Channelized T1/E1 and ISDN PRI Modules Product Overview The Cisco Channelized T1/E1 and ISDN PRI High-Speed WAN Modules combine multiple T1/E1 WAN connectivity Channelized T1/E1 and ISDN Primary
Cisco Channelized T1/E1 and ISDN PRI Modules for the Integrated Services Routers
Cisco Channelized T1/E1 and ISDN PRI Modules for the Integrated Services Routers The Cisco Channelized T1/E1 and ISDN PRI High-Speed WAN Modules combine multiple T1/E1 WAN connectivity-channelized T1/E1
Cisco Packet-over-T3/E3 Service Module
Data Sheet Cisco Packet-over-T3/E3 Service Module The new Cisco Packet-over-T3/E3 Service Module (SM-X-1T3/E3) provides highspeed WAN access for Cisco Integrated Services Routers (ISRs). The T3/E3 service
Cisco Channelized T1/E1 and ISDN PRI Modules for the Integrated Services Routers
Cisco Channelized T1/E1 and ISDN PRI Modules for the Integrated Services Routers The Cisco Channelized T1/E1 and ISDN PRI High-Speed WAN Modules combine multiple T1/E1 WAN connectivity-channelized T1/E1
Cisco 1-Port Channelized STM-1/OC-3 Shared Port Adapter Version 2
Data Sheet Cisco 1-Port Channelized STM-1/OC-3 Shared Port Adapter Version 2 Today's successful businesses require more bandwidth and feature-rich services to maintain a competitive advantage. To serve
T1/E1 High-Speed WAN Interface Card for Cisco 1861 Router
T1/E1 High-Speed WAN Interface Card for Cisco 1861 Router Cisco integrated services routers offer a wide variety of WAN connectivity modules to accommodate the range of application needs in customer networks.
24-Port Channelized E1/T1 Line Card Overview
CHAPTER -Port Channelized E/T Line Card Overview This chapter describes the Cisco series -port channelized E/T line card (referred to as the -port channelized E/T line card), and contains the following
Cisco 4000 Series Integrated Services Router T1/E1 Voice and WAN Network Interface Modules Data Sheet
Data Sheet Cisco 4000 Series Integrated Services Router T1/E1 Voice and WAN Network Interface Modules Data Sheet These flexible interface cards support multiple integrated data and voice applications,
Cisco 24-Port Channelized T1/E1/J1 Circuit Emulation Over Packet and Channelized ATM Shared Port Adapter
Cisco 24-Port Channelized T1/E1/J1 Circuit Emulation Over Packet and Channelized ATM Shared Port Adapter The Cisco I-Flex design combines shared port adapters (SPAs) and SPA interface processors (SIPs),
Cisco Communication Media Module
Cisco Catalyst 6500 Series and Cisco 7600 Series Communication Media Module Product Overview Cisco Unified Communications is a comprehensive IP communications system of voice, video, data, and mobility
CISCO 2-PORT AND 4-PORT CLEAR CHANNEL T3/E3 SHARED PORT ADAPTERS
DATA SHEET CISCO 2-PORT AND 4-PORT CLEAR CHANNEL T3/E3 SHARED PORT ADAPTERS The Cisco I-Flex design combines shared port adapters (SPAs) and SPA interface processors (SIPs), leveraging an extensible design
Cisco 1-, 2-, and 4-Port OC-48c/STM-16c POS/ RPR Shared Port Adapter
Data Sheet Cisco 1-, 2-, and 4-Port OC-48c/STM-16c POS/ RPR Shared Port Adapter The Cisco Interface Flexibility (I-Flex) design combines shared port adapters (SPAs) and SPA interface processors (SIPs)
Cisco Third-Generation 1-, 2-, and 4-Port T1/E1 Multiflex Trunk Voice/WAN Interface Cards
Cisco Third-Generation 1-, 2-, and 4-Port T1/E1 Multiflex Trunk Voice/WAN Interface Cards These flexible interface cards support multiple integrated data, voice and video applications, facilitating the
These highly flexible interface cards facilitate several important applications:
One- and 2-Port Serial and Asynchronous High-Speed WAN Interface Cards for Cisco 1800, 1900, 2800, 2900, 3800, and 3900 Series Integrated Services Routers Serial and asynchronous high-speed WAN interface
SRX 210 Services Gateway T1/E1 Mini-Physical Interface Module
SRX 210 Services Gateway T1/E1 Mini-Physical Interface Module The T1/E1 Mini-PIM provides the physical connection to T1 or E1 network media types and also performs T1 or E1 framing and line-speed signaling.
Cisco 1-Port OC-192c/STM-64c POS/RPR Shared Port Adapter
Cisco 1-Port OC-192c/STM-64c POS/RPR Shared Port Adapter The Cisco I-Flex approach combines shared port adapters (SPAs) and SPA interface processors (SIPs), providing an extensible design that enables
T3 E3 and T1 E1 Controller Commands on Cisco IOS XR Software
T3 E3 and T1 E1 Controller Commands on Cisco IOS XR Software This module describes the commands to configure T3/E3 and T1/E1 controllers on routers supporting Cisco IOS XR software. HR-321 bert e1 T3 E3
Enhanced Performance, Versatility, High Availability, and Reliability at the Provider Edge
Enhanced Performance, Versatility, High Availability, and Reliability at the Provider Edge Cisco 7609-S Router The Cisco 7609-S Router is a high-performance router deployed at the network edge, where performance,
Cisco Wide Area Application Services (WAAS) Appliances
Data Sheet Cisco Wide Area Application Services (WAAS) Appliances Cisco Wide Area Virtualization Engine Product Overview The Cisco Wide Area Application Virtualization Engine (WAVE) product line comprises
Configuring the Channelized 12-port CT3/T1 Optical Services Modules
CHAPTER 7 Configuring the Channelized 12-port CT3/T1 Optical Services Modules This chapter describes how to configure the 12-port channelized/unchannelized DS3 Optical Services Modules (OSM-12CT3/T1).
Extending Performance, Versatility, and Reliability at the Provider Edge
Cisco 7606 Chassis Extending Performance, Versatility, and Reliability at the Provider Edge Cisco 7606 Router The Cisco 7606 Router is a compact, high-performance router designed in a 6-slot form factor
Appendix D T1 Overview
Appendix D T Overview GENERAL T refers to the primary digital telephone carrier system used in North America. T is one line type of the PCM T-carrier hierarchy listed in Table D-. T describes the cabling,
DXC Family. Multiservice Access Node FEATURES
DXC Family Multiservice Access Node FEATURES Digital cross-connection for up to 30 n x 56/64 kbps or T1/E1 over copper or fiber The modular DXC family includes the following chassis types: DXC-30 with
DataSMART 554 & 558 T1/FT1 Plug-in DSU/CSUs Page 1 of 8. T1/FT1 Single-port Plug-in DSU/CSUs
554 & 558 T1/FT1 Plug-in DSU/CSUs Page 1 of 8 = PDF Leased Line Economical T1 Internet Access Central Site T1 Management T1/FT1 Single-port Plug-in DSU/CSUs Key Features Specifications Ordering Information
Chapter 4 T1 Interface Card
Chapter 4 T1 Interface Card GENERAL This chapter describes DTE interface options that may be required if application requirements change. It also describes software configuration for the T1 interface card.
Configuring E1 and T1 Interfaces
4 Configuring E1 and T1 Interfaces Contents Overview of E1 and T1 WAN Connections.......................... 4-3 Elements of an E1- or T1-Carrier Line.......................... 4-3 Connecting Your Premises
Configuring E1 and T1 Interfaces
4 Configuring E1 and T1 Interfaces Contents Overview of E1 and T1 WAN Connections.......................... 4-3 Elements of an E1- or T1-Carrier Line.......................... 4-3 Connecting Your Premises
1. Overview. 2. F-bit Utilization
1. Overview... 1 2. F-bit Utilization... 1 3. T1 Line Signal... 2 4. T1 Alarm Conditions... 3 5. 64 kbps Channel Characteristics... 3 6. Timeslot Handling... 3 7. Unframed Mode... 4 1. Overview The T1
Cisco WAE Deployed with Cisco ACNS: Product Function Matrix. Two 10/100/1000BASE-T. Two 10/100/1000BASE- T
:: Seite 1 von 6 :: Datenblatt zum Produkt Cisco 4 GB RAM UPGRADE FOR WAE-674 mit DC# 478819 :: Cisco Wide Area Application Engine The Cisco Wide Area Application Engine (WAE) platforms are a portfolio
Dedicated Access Solutions for Internet Service Providers
White Paper Dedicated Access Solutions for Internet Service Providers INTRODUCTION Revenue from business connections to the Internet represents, on average, almost 60 percent of the total revenue to Internet
Cisco ubr7200-npe-g2 Network Processing Engine
Cisco ubr7200-npe-g2 Network Processing Engine Product Overview With the introduction of the ubr7200-npe-g2 Network Processing Engine, service providers can now take advantage of the enhanced performance
T1 Networking Made Easy
T1 Networking Made Easy 1 THE T1 CARRIER 3 WHAT DOES A T1 LOOK LIKE? 3 T1 BANDWIDTH 3 T1 PHYSICAL CHARACTERISTICS 4 T1 FRAMING 5 LINE CODE 6 T1 NETWORKING 6 TELCOS 6 PSTN ACCESS WITH A T1 8 SUMMARY OF
SRX 210 Services Gateway T1 Interface Configuration
SRX 210 Services Gateway T1 Interface Configuration To configure a T1 interface: 1. Select Configuration > Quick Configuration > Interfaces if the Interfaces Quick Configuration page is not displayed.
Cisco One and Two Port T1/E1 Multiflex Voice/WAN Interface Cards
DATA SHEET Technical Information Cisco One and Two Port T1/E1 Multiflex Voice/WAN Interface Cards FLEXIBLE MULTISERVICE SOLUTION SUPPORTS MULTIPLE VOICE, DATA AND INTEGRATED VOICE/DATA APPLICATIONS, FACILITATING
Nokia 7750 Service Router and Nokia 7450 Ethernet Service Switch
Nokia 7750 Service Router and Nokia 7450 Ethernet Service Switch ASAP MDA and The Nokia 7750 Service Router (SR) and 7450 Ethernet Service Switch (ESS) Any Service Any Port (ASAP) Media Dependent Adapters
2-port STM-1/OC-3 Channelized E1/T1 Line Card for Cisco 12000 Series Internet Routers
2-port STM-1/OC-3 Channelized E1/T1 Line Card for Cisco 12000 Series Internet Routers This feature module describes the Two-port STM-1/OC-3 Channelized E1/T1 line card and its use in the Cisco 12000 series
- T-Carrier Technologies -
1 T-Carrier Fundamentals - T-Carrier Technologies - T-Carrier systems provide digitized communication for voice or data traffic across a telephone provider s network. The T-Carrier specification defines
WEB RANger-II Internet Access Router
Data Sheet WEB RANger-II Wide-ranging Internet and voice connectivity for small or medium size offices IP/IPX routing and standard bridging Data services over E1/T1, fractional E1/T1, Frame Relay, ISDN,
Product Overview. Features CHAPTER
CHAPTER 1 This chapter describes the Cisco IAD1101 integrated access device chassis, and the line interface modules supported by the Cisco IAD1101. This chapter includes the following sections: Features
Cisco Wide Area Application Engine
Cisco Wide rea pplication Engine The Cisco Wide rea pplication Engine (WE) platforms are a portfolio of powerful, scalable network appliances that host Cisco WN optimization and application acceleration
RICi-E1, RICi-T1 Fast Ethernet over E1/T1 Intelligent Converters
Data Sheet RICi-E1, RICi-T1 Connect Fast Ethernet LANs over E1 or T1 circuits Wire-speed packet forwarding 4 levels of QoS, based on four VLAN priority queues in accordance with 802.1p and IP Precedence
T3/E3 ATM Network Modules for the Cisco 2800 and 3800 Integrated Services Routers
T3/E3 ATM Network Modules for the Cisco 2800 and 3800 Integrated Services Routers The new Cisco T3/E3 ATM Network Module (NM-1A-T3/E3) is now available for the Cisco ISR 2800 and 3800 Series Routers that
WANs connect remote sites. Connection requirements vary depending on user requirements, cost, and availability.
WAN Review A WAN makes data connections across a broad geographic area so that information can be exchanged between distant sites. This topic defines the characteristics of a WAN. WAN Overview WANs connect
Cisco Wide Area Virtualization Engine
. Data Sheet Cisco Wide Area Virtualization Engine Product Overview The Cisco Wide Area Virtualization Engine (WAVE) appliances extend the Cisco WAN optimization appliance portfolio to provide the industry
ORION TELECOM NETWORKS INC. T1
RION TELECOM NETWORKS ORION TELECOM NETWORKS INC. T1 Protection (Fail-Over) Switch Product Brochure & Data Sheet Headquarters: Phoenix, Arizona Orion Telecom Networks Inc. 20100, N 51st Ave, Suite B240,
INTRODUCTION TO MEDIA CONVERSION
WHITE PAPER INTRODUCTION TO MEDIA CONVERSION Table of Contents Introduction 1 What is a Media Converter? 1 Advantages of Media Conversion Technology 1 Benefits of Fiber Optic Cabling 2 Types of Media Converters
Cisco Intrusion Detection System Services Module (IDSM-2)
Data Sheet Cisco Intrusion Detection System Services Module (IDSM-2) Cisco integrated network security solutions enable organizations to minimize risk and maximize business continuity. The Cisco IDSM-2
Enterprise Switches. Accelar 8000
Enterprise Switches Accelar 8000 10-slot and 6-slot Chassis Data Sheet High Availability Operational Simplicity Low cost of Ownership Year 2000 Compliant The Accelar 8000 enterprise switch is a new platform
Loop-IP6700 TDMoEthernet
Loop- Description Loop- is designed to transport /T1/DTE/E3/DS3 signal with timing plus Ethernet traffic over IP network, electrical or optical. This is a cost effective way of migrating to IP network
of Network Access ASC Broadband Services Access Platform The New Edge Advanced Switching Communications
Broadband Services Access Platform The New Edge of Network Access Advanced Switching Communications Market Situation The explosion of the Internet and customer demand for bandwidth is revolutionizing service
Megaplex-2100/2104 Modules ML-1/2E1/T1, MLF-1/2E1/T1
Data Sheet Megaplex-2100/2104 Modules ML-1/2E1/T1, MLF-1/2E1/T1 Copper or Fiber Optic Interface, Single/Dual E1/T1 Main Link Modules Connecting Megaplex-2100/2104 to various E1 and T1 services One or two
How To. Configure E1 links. Introduction. What information will you find in this document?
How To Configure E1 links Introduction E1 is the European digital transmission format standard, traditionally used for inter-pbx traffic, where a large number of calls warrant a leased line between two
Cisco Unified Videoconferencing 3522 Gateway and Unified Videoconferencing 3527 Gateway
Data Sheet Cisco Unified Videoconferencing 3522 Gateway and Unified Videoconferencing 3527 Gateway Connecting H.323 videoconferencing systems on IP networks to H.320-based videoconferencing endpoints on
Cisco ONS 15310-MA CE-Series 6-Port Multirate Ethernet Card
Cisco ONS 15310-MA CE-Series 6-Port Multirate Ethernet Card The 6-port Multirate Ethernet Card for the Cisco ONS 15310-MA Multiservice Provisioning Platform (MSPP) enables the delivery of true carrier-class
8-Port E3/DS3 ATM Line Card Overview
CHAPTER 8-Port E/DS ATM Line Card Overview This chapter describes the Cisco series 8-port E/DS ATM line card (referred to as the 8-port E/DS ATM line card) and contains the following sections: Line Card
MLPPP Deployment Using the PA-MC-T3-EC and PA-MC-2T3-EC
MLPPP Deployment Using the PA-MC-T3-EC and PA-MC-2T3-EC Overview Summary The new enhanced-capability port adapters are targeted to replace the following Cisco port adapters: 1-port T3 Serial Port Adapter
Cisco Wide Area Application Services (WAAS) Network Module
Cisco Wide Area Application Services (WAAS) Network Module Cisco Wide Area Application Services (WAAS) Network Modules (NME) for Cisco Integrated Services routers (ISR), and the second-generation (G2)
The Cisco Unified Computing System is a Highly Available Cohesive Architecture
Data Sheet Cisco UCS 5100 Series Blade Server Chassis Cisco Unified Computing System Overview The Cisco Unified Computing System (Cisco UCS ) is a next-generation data center platform that unites computing,
Helpful Tools. Version: 3412. Copyright 2007-2010 ImageStream Internet Solutions, Inc., All rights Reserved.
Helpful Tools Version: 3412 Copyright 2007-2010 ImageStream Internet Solutions, Inc., All rights Reserved. Table of Contents Router Installation and Configuration Manual/Helpful Tools...1 Netmask Conversion
T1 Installation and Maintenance
T1 Installation and Maintenance INTRODUCTION T1 also known as Digital Signal level 1(DS1) is a digital technology that was created during the 1960s to carry voice and data services. The original focus
Network Monitoring White Paper
Network ing White Paper ImageStream Internet Solutions, Inc. 7900 East 8th Road Plymouth, Indiana 46563 http://www.imagestream.com info@imagestream.com Phone: 574.935.8484 Sales: 800.813.5123 Fax: 574.935.8488
Cisco 7600 Series Route Switch Processor 720
Cisco 7600 Series Route Switch Processor 720 Product Overview The Cisco 7600 Series Route Switch Processor 720 (RSP 720) is specifically designed to deliver high scalability, performance, and fast convergence
Dialogic DSI SS7LDH4 Network Interface Board
The Dialogic DSI SS7LDH4 Network Interface Board offers SS7 network connectivity to service nodes handling low volumes of signaling traffic (for example, 200 calls per second or less), and its half-sized
Dialogic I-Gate 4000 SIP Gateway
The Dialogic I-Gate 4000 is a feature-rich bridge from legacy TDM-based networks to next generation SIP IPbased networks. The I-Gate 4000 enables service providers to reduce the cost of supplying voice
Chapter 2 - The TCP/IP and OSI Networking Models
Chapter 2 - The TCP/IP and OSI Networking Models TCP/IP : Transmission Control Protocol/Internet Protocol OSI : Open System Interconnection RFC Request for Comments TCP/IP Architecture Layers Application
Cisco CCNA Optional Semester 4 Labs Wide Area Networking LAB 1 T1 TSU WAN LINK OVERVIEW - Instructor Guide (Estimated time: 30 minutes)
CNAP @ VCC 1 of 8 LAB 1 T1 TSU WAN LINK OVERVIEW - Instructor Guide (Estimated time: 30 minutes) Objectives: Understand the function of a T1 Service Unit (TSU) in network telecommunications Connect routers
WAN Module Installation and User Guide
WAN Module Installation and User Guide (Includes WM-4T1i Module Installation and User Guide) Extreme Networks, Inc. 3585 Monroe Street Santa Clara, California 95051 (888) 257-3000 http://www.extremenetworks.com
Extending Performance, Versatility, and Reliability at the Provider Edge
Cisco 7604 Chassis Extending Performance, Versatility, and Reliability at the Provider Edge Cisco 7604 Router The Cisco 7604 Router is a compact, high-performance router designed in a 4-slot form factor
Cisco TelePresence MSE 8000
Cisco TelePresence MSE 8000 Figure 1. Cisco TelePresence MSE 8000 The Cisco TelePresence portfolio creates an immersive, face-to-face experience over the network empowering you to collaborate with others
Cisco Catalyst 6807-XL Modular Switch
Data Sheet Cisco Catalyst 6807-XL Modular Switch Product Overview Network traffic has grown exponentially over the last several years, and this trend is expected to continue into the foreseeable future.
Loop-V4300 MINI DACS E1/ T1 CONVERTER
MINI DACS Loop-V4300 MINI DACS / CONVERTER Description Loop-V4300 Mini DACS / converter provides both DS0 and n x 64 Kbps cross-connect between any and ports and to format conversion functions. to conversion
FCD-E1LC, FCD-T1LC Managed E1/T1 or Fractional E1/T1 Access Units
Where to buy > See the product page > Data Sheet FCD-E1LC, FCD-T1LC Managed TDM multiplexers for access to full or fractional E1/T1 services Managed access units for E1/T1 or fractional E1/T1 service E1/T1
Configuring Serial Interfaces
Configuring Serial Interfaces Use the information in this chapter to configure serial interfaces. For information on configuring an Asynchronous Transfer Mode (ATM) interface, see the Configuring ATM Access
WANic 800 & 805. 1 or 2 HSSI ports Up to 52 Mbps/port. WANic 850 & 855. 1 or 2 T3 or E3 ports Full-speed CSU/DSU. WANic 880.
WANic P C I S O L U T I O N S WANic PCI cards are high-performance synchronous WAN adapters for use in standard Linux PCs and Industrial Series routers from ImageStream. WANic adapters include one, two,
FarSync TE1R. A Universal PCI adapter for E1 and T1 (G.703 / G.704) connections for Linux and Windows
FarSync TE1R A Universal PCI adapter for E1 and T1 (G.703 / G.704) connections for Linux and Windows Key Features Cost effective solution E1 and T1 unstructured and fractional (G.703, G.704) Universal
Carrier Ethernet: New Game Plan for Media Converters
Introduction IEEE Std. 802.3ah, also referred to as Ethernet in the First Mile (EFM) standard, has a well established name within the industry today. It lays out ground rules for implementing Ethernet
TDMoEthernet. Description
Loop-IP6700 TDMoEthernet Description Loop-IP6700 TDMoEthernet is used to transport TDM traffic over IP network, in addition to Ethernet traffic. As the core communications network migrates from TDM to
Cisco 7816-I5 Media Convergence Server
Cisco 7816-I5 Media Convergence Server Cisco Unified Communications Solutions unify voice, video, data, and mobile applications on fixed and mobile networks, enabling easy collaboration every time from
Cisco Nexus 7000 Series Supervisor Module
Cisco Nexus 7000 Series Supervisor Module The Cisco Nexus 7000 Series Supervisor Module (Figure 1) scales the control plane and data plane services for the Cisco Nexus 7000 Series system in scalable data
Cisco Enhanced High-Speed WAN Interface Cards
Data Sheet Cisco Enhanced High-Speed WAN Interface Cards Cisco Gigabit Ethernet Dual-Identity Small Form-Factor Pluggable and Copper Enhanced High-Speed WAN Interface Card. Product Overview The Cisco Gigabit
Cisco UCS B-Series M2 Blade Servers
Cisco UCS B-Series M2 Blade Servers Cisco Unified Computing System Overview The Cisco Unified Computing System is a next-generation data center platform that unites compute, network, storage access, and
Cisco Wide Area Application Services (WAAS) Network Module
Cisco Wide Area Application Services (WAAS) Network Module The Cisco Wide Area Application Services (WAAS) Network Module for the Cisco Integrated Services Routers (ISR) is a powerful WAN optimization
Overview. Port Adapter Overview CHAPTER
CHAPTER This chapter describes the PA-4EG port adapter and contains the following sections: Port Adapter, page - Interface Specifications, page - LEDs, page -4 Cables, Connectors, and Pinouts, page -4
Cisco 2600 Series Modular Access Routers
Cisco 2600 Series Modular Access Routers The Cisco 2600 Series is an award-winning series of modular multiservice access routers, providing flexible LAN and WAN configurations, multiple security options,
Enhanced Performance, Versatility, High Availability, and Reliability at the Provider Edge
Cisco 7606-S Router Enhanced Performance, Versatility, High Availability, and Reliability at the Provider Edge The Cisco 7606-S Router is a compact, high-performance router designed in a 6-slot form factor
! encor en etworks TM
! encor en etworks TM Version A, March 2010 2013 Encore Networks, Inc. All rights reserved. Configuring the BANDIT III s T1 E1 Card for a PCM Voice Network The T1 E1 card fits into the expansion slot on
Cisco T3/E3 Network Module for Cisco 2600, 3600, and 3700 Series Routers
Data Sheet Cisco T3/E3 Network Module for Cisco 2600, 3600, and 3700 Series Routers The Cisco T3/E3 Network Module provides high-speed WAN access for the Cisco 2600, 3600, and 3700 series routers. T3/E3
Cisco 3300 Series Mobility Services Engine
Cisco 3300 Series Mobility Services Engine An appliance-based platform that enables industry mobility solutions using a centralized, services engine with an open API for scalable mobility applications
Loop-IP6700 TDMoEthernet
Loop-IP6700 TDMoEthernet Description Feature 1U height WAN port One electric Ethernet (10/100 BaseT) or optical Ethernet (10/100 Base-FX) Tributary ports TDM interfaces low speed, up to 4 E1/T1 low speed,
Cisco IPS 4200 Series Sensors
Data Sheet Cisco IPS 4200 Series Sensors Cisco IPS 4200 Series Sensors are a core component of the Cisco Self-Defending Network. In today s busy network environments, business continuity relies on efficient
Cisco 7400 Series Internet Router
Cisco 7400 Series Internet Router Product Overview The Cisco 7400 Internet Router is the highest performance single-rack unit (1RU) service-rich router in the industry. Its compact, stackable architecture